Calibrations
Chromatography & Tangential Flow Filtration Servicing and Spare
Parts
MA Controls Open
Modern Workplace E-book
Ontdek tips voor een goede uitrol van de
moderne werkplek voor jouw organisatie
Openen
Home ▼
Download our free
ebook
Download our free Sale & Lease
Back ebook, a service tailored to
your company
WEDNESDAY, JUNE 1, 2022
STANDARD OPERATING
PROCEDURE FOR DISPOSAL
OF CHEMICAL WASTE
1.0 OBJECTIVE
To lay down the standard operating procedure for
disposal of chemical waste.
2.0 SCOPE
This SOP shall be applicable for disposal of
chemical waste in Chemical Laboratory.
3.0 RESPONSIBILITY
3.1 Chemist and above shall be responsible for the
preparation and execution of this SOP
3.2 QC & QA Head shall be responsible for the
checking and approval of this SOP.
3.3 Company General Manager shall be responsible
for the authorization of this SOP.
4.0 ACCOUNTABILITY
Head QC
5.0 PROCEDURE
5.1 Solid waste the left over sample or waste after
the analysis shall be collect or deposit into the ‘Solid
waste bin’ container.
5.2 Liquid waste shall be collect or deposit into the
‘Liquid waste bin’ container.
5.3 The expired / invalid chemicals and reagents
shall be discard or pour into the respective waste
bin.
5.4 The liquid waste shall be pour slowly into the
waste bin to avoid spillage or fumes evaporation.
5.5 An empty bin shall be keep to replace the filled
one at any time to collect the waste.
5.6 The spillage shall be clean on the surface of
container immediately during usage.
5.7 The filled waste bin shall be store in the
designated location and send it to outside party for
disposal.
5.8 Precautions
5.8.1 Ensure that proper personal protective
equipment like hand gloves and nose mask shall be
use during handling.
5.8.2 Trained Laboratory personnel shall be handle
the chemicals waste.
5.8.3 The waste bin shall not be filled above the
mark provided.
5.8.4 The spillage shall be remove immediately, if
any.
5.8.5 The container shall not be close tightly.
5.8.6 The waste shall not be drain into sink.
6.0 REFERENCES
Not Applicable
7.0 ANNEXURE
Not Applicable
8.0 ABBREVIATIONS :
SOP : Standards Operating Procedure
QC : Quality Control
CGM : Company General Manager
HOD : Head of the Department
QA : Quality Assurance
QCD : Quality Control Department
QAD : Quality Assurance Department
EQP : Equipment
END OF THE
DOCUMENTS
You may like to see following links:
1. STANDARD OPERATING PROCEDURE FOR
BIO-WASTE DISPOSAL
2. STANDARD OPERATING PROCEDURE FOR
DISPOSAL OF TEST SAMPLE
3. SOP FOR DISPOSAL OF MICROBILOGY
WASTE
4. SOP FOR SYRINGE NEEDLE DESTROYER
5.List of Documents needed to register a laboratory
to Pollution Control Board
at June 01, 2022
Share
No comments:
