R01
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#
Router(config-router)#net 192.168.1.0
Router(config-router)#net 10.0.0.0
Router(config-router)#no auto-summary
Router(config-router)#
Router(config-router)#end
Router#
.................
Router(config)#access-list 101 deny ip 10.0.0.0 255.0.0.0 host 30.0.0.10 255.0.0.0
^
% Invalid input detected at '^' marker.
Router(config)#access-list 101 deny ip 10.0.0.0 255.0.0.0 30.0.0.10 255.0.0.0
Router(config)#access-list 101 permit ip 10.0.0.0 255.0.0.0 any
Router(config)#int g0/0
Router(config-if)#ip access-group 101 in
Router(config-if)#ex
Router(config)#
Router(config)#end
Router#
......
Router(config)#no access-list 101 permit ip 10.0.0.0 255.0.0.0 any
Router(config)#access-list 101 permit ip 10.0.0.0 255.0.0.0 20.0.0.0 255.0.0.0
Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#wr
Building configuration...
[OK]
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#access-list 101 permit ip 10.0.0.0 255.0.0.0 192.168.1.30
255.255.255.252
Router(config)#ex
...........................................
ok
Router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 30.0.0.0
0.255.255.255
Router(config)#access-list 101 permit ip 10.0.0.0 0.255.255.255 any
Router(config)#ex
Router#
..................
R02
Router(config)#int g0/1
Router(config-if)#ip address 172.16.1.6
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state
to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state
to up
% Incomplete command.
Router(config-if)#ip address 172.16.1.4 255.255.255.252
Bad mask /30 for address 172.16.1.4
Router(config-if)#ip address 172.16.1.4 255.255.255.0
Router(config-if)#ex
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#net 172.16.1.0
Router(config-router)#no auto-summary
Router(config-router)#end
Router#
%SYS-5-CONFIG_I
....
R0
Router(config)#int g0/0
Router(config-if)#ip address 172.16.1.3 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#
Router(config-if)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-router)#v 2
Router(config-router)#net 172.16.1.0
Router(config-router)#
Router(config-router)#no auto-summary
Router(config-router)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#wr
Building configuration...
[OK]
Router#
