Installation Guide

FLOTATION TUB
PJYD2200

Ɣ Cautions and warnings 2

Ɣ Included parts 4
Ɣ Required tools 5
Ɣ 6SHFL¿FDWLRQV 6
Ɣ Dimension drawings 7
Ɣ Electrical construction 8
Ɣ Installation procedures 9
Ɣ Meaning of the indications 10
Ɣ Building a base for the bathtub 10
Ɣ Installing the bathtub 11
Ɣ Conduct a trial run 14
Ɣ Finishing 15

To service installers
Please explain the FLOTATION TUB functions and operation to the customers.
Keep the power turned off when there is time until handing over the product in a new home.
 Cautions and warnings
Please read the installation manual and follow these cautions and warnings carefully before beginning the
construction.
Follow all safety precautions and warnings.
When this appears next to a topic, this indicates that misoperation could result in death
WARNING or serious injury.

When this appears next to a topic, this indicates that misoperation may result in injury
CAUTION or physical damage.

Ɣ The following symbols are used to classify and explain instructions that must be followed.
Symbol example Meaning of symbol

This symbol indicates something that is "Prohibited".

This symbol indicates something that is "Required".

WARNING
Do not stand on bathtub while working.
Ɣ Doing so could cause a fall or injury or damage the components.

Only install the supplied parts or directed parts, and do not apply any changes to
them.
Prohibited Ɣ Especially make sure not to change the dimensions of the product.

Do not bend, handle the power cords roughly or place heavy objects on them.
Ɣ 7KLVFRXOGUHVXOWLQD¿UHRUHOHFWULFVKRFN

Make sure to follow the installation guide for installation.

Ɣ ,QFRPSOHWHLQVWDOODWLRQFDQUHVXOWLQD¿UHRUHOHFWULFVKRFN2WKHUZLVHWKHUHLVDFKDQFHRIOHDNDJHWKDW
could wet and cause damage to household property.

Make sure to follow the procedures for the drainage piping attachment.
Ɣ Defective construction can result in water leakage that could wet and cause damage to household
property.

After unpacking, swiftly dispose of any unnecessary packing materials.

Ɣ The wood frame, nails, cardboard boxes, vinyl bags, or sealing straps may cause an injury.
If children play with the packaging materials there is a risk of suffocation or other accidents.

Have a specialized electrician conduct all electrical work.

Ɣ If the work is not conducted properly, it may result in an injury or physical damage.
Always observe Attach a wiring circuit breaker and ground fault circuit interrupter (GFCI) to the
electrical equipment of the bathtub.
Attach the tap water supply equipment to the bathtub.
Make sure to connect the ground wire (ground).
8VHWKHVSHFL¿HG$&YROWDJHIRUWKHYROWDJH
Ɣ 7KLVPD\UHVXOWLQGDPDJHRUIDLOXUHWRWKHGHYLFHRUD¿UH

After completing the installation, make sure to check the operation of the wiring
circuit breaker and ground fault circuit interrupter (GFCI).
Ɣ ,IWKH*)&,LVQRWSURSHUO\RSHUDWLQJLWPD\UHVXOWLQD¿UHRUHOHFWULFVKRFN

2
 WARNING
Make sure to install the bathtub according to the installation guide and in a stable
location that can withstand its mass.
Ɣ 'HIHFWLYHLQVWDOODWLRQFDQUHVXOWLQDQLQMXU\FDXVHGE\WKHEDWKWXEIDOOLQJRUÀLSSLQJRYHU

When connecting the wiring, check to see that the power is turned off.
Ɣ This may cause electric shock.

Always observe
Ensure that you have an ergonomic working position during transport and assembly.
Ɣ Take care at every stage that your move is safe. Ensure that you have assistance to avoid risk of accident
or injury.

Observe the current local prevention of accidents and building regulations as well as
sanitary and environmental protection rules during installation.

CAUTION
Do not place a stepladder inside the bathtub or place heavy objects on the edge the
bathtub.
Ɣ This may cause damage.

Do not drop or bump anything hard or heavy onto the bathtub.

Ɣ This may cause the bathtub to crack and result in an injury, or leakage that could wet and cause damage
to household property.

Keep sources of heat at a distance.

Do not smoke.
Prohibited Ɣ Doing so could cause damage.

Do not install the bathtub outdoors or in a location that is regularly exposed to

sunlight (such as a sun room).
Ɣ This may cause the bathtub to freeze and cause damage or discolouration.

When delivering the bathtub, do not hold the hose or piping or bump anything hard
against it.
When opening the packaging, make sure that all of the supplied parts and the
bathtub itself are not damaged, and if they are, do not use the damaged parts.
Ɣ Replace any damaged parts.

When installing the bathtub in a location that could result in damage due to water
OHDNDJHPDNHVXUHWRDSSO\ZDWHUSURRISURFHVVLQJFRQVWUXFWLRQRQWKHÀRRUVXUIDFH
Ɣ ,IWKHUHLVZDWHUOHDNDJHLWPD\FDXVHGDPDJHWRWKHÀRRUEHORZ
Always observe Remove the bathtub's protective sheet after the construction is completed.
Secure an area that enables proper space for the usage and maintenance of the bathtub.
%HIRUHFRPSOHWLQJWKHLQVWDOODWLRQPDNHVXUHWRFRQ¿UPWKHVHDODELOLW\RIHDFKSDUW
Ɣ If water leakage is detected, remove the cause of the leakage.

3
 Included parts
A-1 : Bathtub A-2 : Polyethylene foamed sheet

A-3 : Instruction manual A-4 : Installation guide

tion Installa
Instruc l Guide tion
Manua

A-5 : Cleaning spatula for NECK BATH

A-6 %DWKWXE¿[LQJSODWHVHW

A-7 : Drain trap (PP) A-8 : Flathead screwdriver (small)

*Hand over A-3, 5 to the customer after the construction is completed.

4
Required tools
B-1 B-2 B-3 B-4

M12
M10

B-5 B-6 B-7 B-8

ijPP

B-9 B-10 B-11

H05VVF
3 x 1.5 mm2
ijaPP
AWG8

B-12 B-13 B-14

PVC adhesive

Silicone PVC primer

B-15 B-16

Water detection sheet

B-17 B-18 B-19

Soft cloth that will not

damage the bathtub

5
 6SHFL¿FDWLRQV
Item 6SHFL¿FDWLRQV

External dimensions 2200 mm (L) × 1050 mm (W) × 780 mm (H)

Bathtub depth 394 mm

Capacity 293 L

Weight 170 kg

GALALINE
Materials
*$/$/,1(LVDQDUWL¿FLDOPDUEOHPDGHRI*)53VDQGZLFKVWUXFWXUH

Normal drainage (partial electrical valve automatic drainage)

Drainage method
2YHUÀRZGUDLQDJH

Drain plug Push-operated drain plug

Drainage rate (with trap) 48 L/min

2YHUÀRZUDWH ZLWKWUDS 48 L/min

Number of jet ports 8 locations

AIR-JET
Approx. 400L/min. (Strong mode)
Ejection air amount
Approx. 250L/min. (Weak mode)

Number of intake parts 1 location

NECK BATH
Number of water outlets 1 location
(Circulation)
:DWHUGLVFKDUJHÀRZUDWH Approx. 18 L/min

Number of intake parts 1 location

HYDROHANDS
Number of water outlets 2 locations
(Circulation)
:DWHUGLVFKDUJHÀRZUDWH Approx. 60 L/min

Irradiation part 1 location

LED lighting
Irradiated colour 1 colour

Controller Electrostatic capacitance-type touch panel

220-240V AC
Rated voltage
Philippines/Saudi Arabia 220V AC

50 Hz
Rated frequency
Philippines/Saudi Arabia 60 Hz

3.5-4.0 A
Rated current
Philippines/Saudi Arabia 4.0 A

700-850 W
Rated power consumption
Philippines/Saudi Arabia 850 W

Standby power consumption 2.8 W

Continuous operation preventing device

Safety devices Overcurrent protection device
Overheating protection device (thermal protector)

6
 Dimension drawings

>,QFDVHRIDWWDFKLQJDQRSWLRQ ÀRRUVWDQGLQJEDWKWXE¿OOHU @
For an optional water faucet, ask the dealer,contractor from whom you purchased the product,or TOTO.

7
 Electrical construction

B-11
25A I¨n 0.03A 20A

H05VVF

220-240V
50/60Hz
700W/850W

B-11
/ aPP

Waterproof + aPP

Tile

Turn the wiring circuit breaker off during operation.

Protect the product with a wiring circuit breaker (In 0.03A and 25A differential switch, 20A magnetic
thermal switch) and ground fault circuit interrupter (GFCI).
Install both switches outside of the bathroom.

8VHD¿[HGFRQQHFWLRQWRVXSSO\SRZHUWRWKHEDWKWXE
Do not extend or relay the power cord, connect it as 1 cord.

When installing the bathtub, do it within the protection area and make sure that the person does not
touch any electrical devices from inside the bathtub.
Install the bathtub over 600 mm away from any electrical appliances or power sockets.

8
 Installation procedures
1 2 3

>>P.10 >>P.11

4 5 6

>>P.12 >>P.13

7 8 9

>>P.14

10 11 12

>>P.15

9
 Meaning of the indications
This operation must be conducted by a contractor.

Operation that must be checked.

,QGLFDWHVWKHZRUNÀRZ

Building a base for the bathtub

1
B-7

B-6

B-8

B-11
/ aPP

Waterproof + aPP

Tile

Please conduct site operation directly on the drain.

When embedding a power cable for the bathtub on the installation side, please use a sheath tube with
an inner diameter of less than 20 mm.

10
Installing the bathtub
2
1 2

B-14

Lift up

Lift up

1
4 Other Choices

B-18
B-17
Cardboard box, etc., for packaging the bathtub

B-2

11
 Power supply

3 4 B-11 5

Brown
Blue
Green/
Yellow

A-8

B-2

1
5
B-4 M12

5mm

5mm

A-2

12
3

6 1 2 3 4

B-12
B-1
B-6 A-6

A(40mm) A(40mm)

5 6

B-15
A-6 B-4 M10

WARNING
Check to see that the hole positions are not overlapping with the cavity portions of
the tile base.
Ɣ If there are cavities, use an adhesive anchor to stabilise.

7 8

B-14

13
 9

Conduct a trial run

10

Check to see that there is no

water leakage when the
B-16 product is operating or
stopped. Conduct a trial run
for 10 minutes.

If trouble occurs during the trial run

Symptoms Processing
The controller does not light Is power being supplied?
up, or operate any functions. Has there been a power outage?
Is it locked? Unlock by pressing and holding for over 3 seconds.
HYDROHANDS / NECK BATH Is the water level in the bathtub too low? Fill the water above the
intake parts.
The drain plug does not Please call for a repair.
open or close.
*Please refer to the instruction manual for other symptoms.

14
11 1 2

WARNING
6WDELOLVHWKHEDWKWXEZLWKD¿[LQJSODWH
Ɣ The bathtub may shake if it is not properly stabilised.

Finishing
12

B-13

WARNING
6HFXUHHQRXJKVSDFHEHWZHHQWKHEDWKWXEDQGWLOHVDQG¿OOWKDWVSDFHZLWKVLOLFRQH
that does not contain alcohol.

15
 2017. 11
Printed in China
©TOTO Ltd. All rights reserved. NTE183