Quarter turn actuator
DAPS-0060-090-R-F0507
Part number: 533477
Data sheet
Feature Value
Size of valve actuator 0060
Flange hole pattern F05
F07
Swivel angle 90 deg
End-position adjusting range at 0° -1 deg ... 9 deg
Depth shaft connection 16.5 mm
Standard connection for valve ISO 5211
Cushioning No cushioning
Mounting position Any
Mode of operation Double-acting
Structural design Scotch yoke system
Position sensing None
Closing direction Clockwise closing
Symbol 00991265
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Safety integrity level (SIL) Up to SIL 2 high demand mode
Up to SIL 2 low demand mode
Operating pressure 0.1 MPa ... 0.84 MPa
Operating pressure 1 bar ... 8.4 bar
Nominal operating pressure 0.56 MPa
Nominal operating pressure 5.6 bar
CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
UKCA marking (see declaration of conformity) acc. to UK EX instructions
Explosion prevention and protection Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX)
ATEX category gas II 2G
ATEX category for dust II 2D
Type of ignition protection for gas Ex h IIC T6...T3 Gb X
Type of (ignition) protection for dust Ex h IIIC T85°C...T200°C Db X
Explosive ambient temperature -20°C <= Ta <= +60°C
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC) 3 - High corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Ambient temperature -20 °C ... 80 °C
4/16/23 - Subject to change - Festo SE & Co. KG 1/2
Feature Value
Torque at nominal operating pressure and 0° swivel angle 60 Nm
Torque at nominal operating pressure and 50° swivel angle 30 Nm
Torque at nominal operating pressure and 90° swivel angle 45 Nm
Note about the torque The actuator's operating torque must not be higher than the maximum
permissible torque listed in ISO 5211, based on the size of the mounting
flange and the coupling.
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 2.1 l
Product weight 1600 g
Shaft connection T14
Pneumatic connection G1/8
Note on materials RoHS-compliant
Cover material Wrought aluminum alloy
Seals material FPM
NBR
PUR
Housing material Wrought aluminum alloy
Material of screws High-alloy steel
Shaft material High-alloy steel
Material number for shaft 1.4305
4/16/23 - Subject to change - Festo SE & Co. KG 2/2
