JOB SAFETY ANALYSIS
JOB SAFETY ANALYSIS
NAME OF LCOATION:
PART-A: JSA No: Date: Work Permit No:176 Page 1 of 3
IOCL/PDIL/NRP/2021/2022 24.06.2021
Unit: Malkapur Area: FWP Location: FWP HOUSE Work permit type:
AREA AREA Hot Work
Job Title: Tank plate, Structural Erection JSA Done By: Sign with Date
1.
2.
Job to be Executed by: 3.
Department Contractor 4.
Mechanical NRP Projects Pvt Ltd 5.
JSA Reviewed by (HOD’s Name, Designation, Sign with date):
1.
2.
SI. Sequence Potential Effect of hazard Control / Preventive Person
NO of steps Hazard Measures responsible
1. Lifting Tools Accident due to 1. Cut 1. Check all the Slings Supervisor/
and Tackles unawareness, 2. Physical Injury physically for no damage Site engineer/
inspection Accident due to 3. Minor injury before fixing. Safety
Non-use of 2. Use Tested & Certified by
PPE’s, Competent Authority
JOB SAFETY ANALYSIS
JOB SAFETY ANALYSIS
NAME OF LCOATION:
Accident due to Slings and tackles only.
unsafe 3. Check quality, size and
condition condition of all chain
Negligence of pulley blocks, slings, U-
work, clamps, D-shackles, wire
Defective Tools ropes etc.
& Tackles 4. Checklist of tools & Tackles
must be audited.
2. Area Accident due to 1. Leg injury 1. Barricade the Swing area Supervisor/
inspection unawareness. 2. Fracture before erection. Site engineer/
2. Allow crane to move only Safety
Accident due to on hard, firm and leveled
unwanted ground.
material at site.
3. Work Accident due to 1. Minor injury or 1. Engage trained Riggers
unawareness of casualty only.
work. 2. Fall of person 2. Ensure the guide rope
Accident due to 3. Fatality while lifting the
Fall of material/ equipment.
Equipment’s. 3. Ensure proper
Accident due to communication between
work platform the two cranes.
damage. 4. Check the trailing crane
Fall of load being should be properly guided
handle by and communication
hydra/crane due should be proper.
to failure 5. Do’s & don’t must be
malfunction of a there on the crane/hydra.
component. 6. Availability of Lord Chart.
Damage to 7. Proximity of electrical
individual/ power line.
Properly due to
failure of hydra /
JOB SAFETY ANALYSIS
JOB SAFETY ANALYSIS
NAME OF LCOATION:
crane during
operation.
Accident due to 1. Can Cause injury 1. Do not take rest inside
Personal or casualty rooms Built for welding
negligence 2. Burn machines or electrical
3. Cut distribution system.
4. Fracture 2. Avoid walking on beams at
5. Fatality height.
3. Wear helmet with chain
strap and full body harness
while working at height.
4. Use hand gloves and
goggles during grinding
operations.
5. Cover or mark the sharp
and projected edges.
6. Do not start within the
operating radius of cranes.
4. Fixing on the Accident due to 1. Hand injury 1. Ensure trained Riggers
position unskilled worker 2. Cut only to work
3. Fracture 2. Avoid unwanted workers
Accident due to 4. Leg injury at the erection area.
unawareness Any physical injury 3. Area to be cordon off at
worker the erection area.
JOB SAFETY ANALYSIS
JOB SAFETY ANALYSIS
NAME OF LCOATION:
5 After Accident due to Minor injury 1. Ensure work area clean Supervisor
Completion Bad and safe.
of work Housekeeping. 2. Ensure equipment’s are
proper fixed.
3. Ensure every lifting tools
are good condition or not.
