Tdev™ TMP6400 Series

COMPUTER TELEPHONY PLATFORM

The TelcoBridges Tdev™ TMP6400 is a high-density computer telephony (CTI) development platform that
meets the needs of service providers looking to expand their value-added services (VAS), providing a cost-
effective foundation for introducing new offerings while rapidly scaling to meet the needs of growing
subscriber numbers.

Whether deployed on a wireline, wireless or VOIP network, the TMP6400 delivers seamless voice
interoperability across TDM and IP networks. However the TMP6400 builds on those capabilities with an
advanced application platform for delivering ring-back tones, unified communications, pre-paid / post-paid
calling, conferencing, Fax over IP (T.38), voicemail, and other enhanced services to subscribers irrespective
of access protocol or device. Leveraging TelcoBridges’ Toolpack™ software toolkit, and a choice of host
deployment platforms, the TMP6400 provides the ability to rapidly develop and deploy applications that tie
together real-time communications from the network with stored external data sources to provide unique
subscriber-specific services.

Offering the industry-leading highest port density and the lowest operating cost—an average 66% less
power consumption than competing products offering similar capacity—the fully field-upgradable Tdev
TMP6400 supports the drive by service providers to increase their profitability, while reduce the
environmental impact of their network footprint.

FEATURES & BENEFITS

Carrier grade: Architected to exacting industry standards, the TMP6400 is designed to meet the need for
reliability that service providers and their customers demand. The TMP6400 features a non-blocking
architecture providing full availability of call channels and other system resources (IVR, VOIP).

Flexibility: A network-agnostic platform, the TMP6400 supports multiple ‘any-to-any’ switching as well as
transcoding support for all major wireline, wireless and Internet voice codecs. With separate chipsets for
signaling, transcoding and interactive voice response (IVR), the TMP6400 provides true full channel
availability.

Density: Supporting up to 64 T1/E1/J1, 3 DS-3 or 1 STM-1 interfaces for a total of 2048 universal voice
channels per unit, the TMP6400 offers significant density in a 1U or 2U form factor. The TMP6400 enables
consolidation of multiple devices for signaling, transcoding and IVR into a single box.

High availability: The TMP6400 features full redundancy with fault-tolerant hardware and software
components.

For more information on how the Tdev TMP6400 can help transform your value-added service offerings,
visit www.telcobridges.com.

> Tdev TMP6400

2U form factor with redundant power supplies shown here;

a 1U unit with a single power supply is also available
 Tdev™ TMP6400 Series
COMPUTER TELEPHONY PLATFORM

TMP6400 SPECIFICATIONS

NETWORK INTERFACES SIGNALING

Telephony ISDN PRI (14+ variants), National ISDN-2, Euro ISDN, DMS100, DMS250, 4ESS,
8 to 64 T1/E1/J1 TDM ports (hardware & software upgradeable); or 5ESS, Japan INS-NET1500
1 to 3 DS3 (software upgradeable) + 2 T1/E1 for SS7 signaling or BITS SIP: RFC 3261 User Agent, SIP Authentication
synchronization; or CAS R2: scriptable state machine enables user-generated variants
1 OC3/STM-1 (with Automatic Protection Switching (APS)) + 2 T1/E1 for SS7
signaling or BITS synchronization SS7*: (20+ variants) MTP2, MTP3, SCCP, TCAP and ISUP
> Up to 64 SS7 links, up to 2048 CICs, HSL, redundant SS7, single or multiple
Capacity
point codes per device
TDM: 192 to 2048 channels
SIGTRAN*: SCTP, M2PA, M2UA, M3UA
VoIP: 192 to 2048 universal channels (vocoder dependent) per device; even
H.248: ITU-T H.248.1
more using less complex codecs such as G.711
WAN IP * Additional licenses required.
Dual 100/1000 Base-T for VoIP traffic
LAN QUALITY OF SERVICE (VoIP)
Dual Redundant 100/1000 Base-T Dynamic jitter buffer (adaptive and fixed), Packet loss concealment,
suppression; Denial of Service (DoS) protection for VoIP media

MEDIA PROCESSING IVR FEATURES

PCM Coding A-law to µ-law encoding and conversion DSP-based plug-in modules; base configuration of 512 channels; field
upgradeable to 1024, 1536 and 2048 channels
Universal Codecs G.711, G723.1, G.726, G.729ab, T.38 (2048 channels)
> Play and record
DTMF Relay RFC2833, SIP INFO method, in-band > DTMF detection, generation, suppression
> Voice Activity Detection (VAD), Comfort Noise Generation (CNG), Automatic
Echo Cancellation G.168 – 128ms tail length on all channels simultaneously
Gain Control (AGC)
Fax Support T.38 fax relay, Group 3, Fax/modem bypass,
G.711 fax fallback MANAGEMENT INTERFACES
Optional Codecs* AMR, AMR-WB (G.722.2), GSM-FR/GSM-EFR, 1 DB-9 serial console port with RS-232C adapter
EVRC/QCELP, G.728, G729eg, iLBC
MANAGEMENT & CONTROL
> Independent dynamic codec selection per channel
> SNMP v2 GET of individual appliance configuration and statistics
>TelcoBridges Element Management System (Toolpack)
APPLICATION AND DEVELOPMENT SOFTWARE >> Live configuration and software upgrades via HTTP
TB Media Gateway™ application (w/source code) >> Monitoring via HTTP
> TDM-to-TDM switching, TDM-to-IP-to-TDM gateway, IP-to-IP hairpinning >> Configuration of multiple devices in the same system with a single interface
> Transcoding, trunking, call routing, fax relay and other functions
> Call Detail Records (CDR): user-definable text files and RADIUS
HARDWARE SPECIFICATIONS
>Call routing engine
Physical Interfaces
>> Fully scriptable (based on Ruby scripting language)
PSTN: 8 to 64 T1/E1/J1 via RJ-48, 1 to 3 DS3, Dual-BNC STM-1 optical or
>>CLI (ANI)-based routing and translation
electrical links (with APS).
>>DID (DNIS)-based routing and translation
IP: Dual interface 100/1000 Base-T Ethernet VoIP ports
>>Least cost routing (with time of day/week/year scheduling and other criteria)
OAM & Control: Dual redundant 100/1000 Base-T Ethernet ports
>> Routing based on Nature of Address (NOA), Numbering Plan Indicator (NPI),
and others Dimensions
>>Pre-and post-routing digit translation 1U with single power supply
> High availability > 1.75” H (44,5 mm) x 17.4” W (442 mm) x 16” D (406 mm)
2U with dual power supplies
Toolpack Application Development Environment
> 3.5” H (88.9 mm) x 17.4” W (442 mm) x 16” D (406 mm)
> Pre-developed C++ classes (call bridging, call routing, IVR, embedded web-
based GUI, voicemail, ODBC database access/RADIUS for CDRs, etc.) Environmentals
> Linux, Intel/SPARC Solaris, Windows OS environments Weight: 1U model @ 15lbs (6.8kg); 2U model @ 20 lbs (9.1 kg)
AC Power: 90 to 260 Volts AC, 47/63 Hz
DC Power: -40 to -60 Volts DC
Power Consumption: 128 W fully loaded
REGULATORY COMPLIANCE Operating temperature range: 0 to +55 °C, 95% rel. hum. non-condensing
EMC FCC Part 15, EN55022, EN61000, ENV50204 Storage temperature range: -10 to +75 °C, 95% rel. hum. non-condensing
Environmental Designed to meet NEBS Level 3
Safety CE, UL60950, CSA C22.2 No.60950-1-03

TelcoBridges Inc., 91 De La Barre, Boucherville, Quebec, Canada, J4B 2X6 Tel.: +1 450 655 8993 Fax: +1 450 655 9511 www.telcobridges.com