CROCHET PATTERN

Heather and Tinker

Design: One Crafty Magpie | Hobbii Design

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 1

MATERIALS MEASUREMENTS
Friends Cotton 8/4 Height of the fairy (without hat):
1 skein of color Charcoal (123) approx. 20 cm / 7.9”
1 skein of color Ash Brown (08) Height of the ghost (without hat):
1 skein of color Anthracite (122) approx. 6 cm / 2.3”
1 skein of color Oatmilk (03)
1 skein of color Sage (114) PATTERN INFORMATION
Meet Heather the Halloween Fairy and her
Rainbow Cotton 8/4 cheeky friend Tinker the Ghost! This pattern is
1 skein of color Natural White (002) perfect if you've already got some crochet
1 skein of color Greyish Purple (013) skills and enjoy crafting adorable characters.
It's all about fun and creativity. Grab the
Winter Glow Solid pattern, prepare your hook and yarn and
1 skein of color Pumpkin (25) start making a charming Halloween duo.

Embroidery Yarn The pattern contains a photoguide.

Colors: white (100), black (900), blush (401)
HASHTAGS FOR SOCIAL MEDIA
Crochet hook 2.25 mm / US 3/0
#hobbiidesign #hobbiiheatherandtinker
Go Handmade black safety eyes Ø 6 mm
#onecraftymagpiexhobbii
(1 pair) and Ø 8 mm (1 pair)
Fiberfill
Yarn needle BUY THE YARN HERE
Stitch marker https://shop.hobbii.com/heather-and-tinker
Sewing pins
Scissors QUESTIONS
Fabric glue (optional)
If you have any questions regarding this
pattern, please feel free to email us at
YARN QUALITY support@hobbii.com
Friends Cotton 8/4, Hobbii Please make sure to include the pattern's
100% cotton name and number.
50 g (1.75 oz) = 160 m (175 yds)
Happy Crafting!
Rainbow Cotton 8/4, Hobbii
100% cotton
50 g (1.75 oz) = 160 m (175 yds)

Winter Glow Solid, Hobbii

51% Wool, 49% Acrylic
100 g (3.5 oz) = 350 m (382 yds)

Embroidery Yarn, Hobbii

100% Mercerized Cotton
1.9 g (0.06 oz)
8 m (8.7 yds)

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 2

Pattern

ABBREVIATIONS, US terminology
MR = magic ring
ch = chain
sc = single crochet, I use “x” shaped single crochet
hdc = half double crochet
dc = double crochet
BLO = work the stitch in the back loop only
FLO = work the stitch in the front loop only
scinc = work 2sc in the same st to increase
scdec = invisible single crochet decrease (crochet 2 sts together in only front loops)
Rnd = round/rounds
slst = slip stitch
st = stitch/stitches
(..) = number of stitches at the end of the round

INFO AND TIPS

- Read the pattern before you start crocheting.
- Crochet in continuous spiral rounds unless otherwise stated in the pattern.
- Stuff your amigurumi firmly as you go.
- Try to make tight stitches to avoid holes.
- Always mark the beginning of each round using a stitch marker

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 3

HEATHER THE HALLOWEEN FAIRY
Start making the doll by making the legs and shoes. In this case, the shoes are not removable,
but crocheted together with the leg.

LEG (make 2) Begin with the shoe. Stuff as you go.

Sole (make 2 pieces for each shoe)

With colour Charcoal make ch6 and start in the second ch from the hook.
Rnd 1: scinc, 3sc, 4sc in next st. Now we’re going to continue on the other side of the
foundation chain, 3sc, scinc (14)
Rnd 2: scinc x2, 3sc, scinc x4, 3sc, scinc x2 (22)
Rnd 3: (sc, scinc) x2, 3sc, (sc, scinc) x4, 3sc, (sc, scinc) x2 (30)
Slst into the next st. Fasten off, weave in ends.

We’re going to make a double sole. Using an Orange yarn, join two sole pieces together with
a slst. To do this, place two pieces together with the wrong side facing each other. Crochet
slst’s by inserting your hook through both loops of each sole piece. Make sure you use all 4
loops. Join two pieces, making slst’s all the way around. You should have 30slst at the end.
Fasten off and weave in ends.

Shoe, Sock and Leg

Rnd 1: Using colour Charcoal, join into the back loop (BL) of the closing slst, where the heel
side is facing you. Make sure it’s exactly in the middle of the heel side!
Make ch1 and 1sc into the same stitch then another 29sc into BL of every slst around. (30)
Rnd 2 – Rnd 3: 1sc in each stitch around (30)
Rnd 4: 5sc, scdec x 10, 5sc (20)
Rnd 5: 6sc, scdec x4, 6sc (16)
Rnd 6: 6sc, scdec x2, 6sc (14)
Start stuffing the shoe firmly and continue as you go.
Rnd 7 – Rnd 9: 1sc in each stitch around - 3 rounds (14)
In the last stitch of the Rnd 9, change the yarn for the Ash Brown and fasten off the
Charcoal!
Rnd 10: BLO, 1sc in each stitch around (14)
Rnd 11 – Rnd 18: 1sc in each stitch around – 8 rounds (14)
In the last stitch of the Rnd 18, change the yarn for the Anthracite and fasten off the Ash
Brown!

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 4

Rnd 19 – Rnd 20: 1sc in each stitch around – 2 rounds (14)
In the last stitch of the Rnd 20, change the yarn for the Oatmilk and fasten off the
Anthracite!
Rnd 21: BLO, 1sc in each stitch around (14)
Rnd 22 – Rnd 31: 1sc in each stitch around – 10 rounds (14)
In the last stitch of the Rnd 31, change the yarn for the Charcoal and fasten off the Oatmilk!
Rnd 32: 1sc in each stitch around (14)
Fasten off, weave in ends.
Make the second leg. Follow instructions for leg one but do not fasten off at the end of Rnd
32.

At this point you can add a shoe border.

To make it, hold the leg with the shoe facing upwards, connect the Charcoal yarn to the last
remaining front loop of Rnd 10 and make 14sc around. Fasten off in invisible way. Repeat
with the second leg.
You can also embroider a shoe lace with an orange yarn.

Now we’re going to join the legs. Keep them slightly towards each other. Joining stitch
should be on the front.
Rnd 33: chain 3, sc to join the first leg, 13sc, 3sc into the ch3, 14sc into the second leg (34)

BODY Stuff as you go

Continue with the Charcoal yarn.
Rnd 34 – Rnd 39: 1sc in each stitch around – 6 rounds (34)

Now, we’re going to move our beginning stitch to the back. To do this, make a number of
stitches to reach the back of our fairy. I made 16sc.

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 5

Rnd 40: 7sc, scdec, 15sc, scdec, 8sc (32)
At the end of Rnd 40, change yarn to the Orange, but do not fasten off the Charcoal!
Rnd 41: 1sc in each stitch around (32)
Rnd 42: BLO, 7sc, scdec, 13sc, scdec, 8sc (30)
At the end of Rnd 42, change yarn to the Charcoal and fasten off the Orange!
Rnd 43: BLO, 1sc in each stitch around (30)
Rnd 44: 7sc, scdec, 11sc, scdec, 8sc (28)
Rnd 45: 1sc in each stitch around (28)
Rnd 46: 7sc, scdec, 9sc, scdec, 8sc (26)
Rnd 47: 1sc in each stitch around (26)
Rnd 48: 7sc, scdec, 7sc, scdec, 8sc (24)
At the end of Rnd 48, change yarn to the Oatmilk and fasten off the Charcoal!
Rnd 49: 7sc, scdec, 5sc, scdec, 8sc (22)
Rnd 50: 7sc, scdec, 3sc, scdec, 8sc (20)
Rnd 51: (2sc, scdec) x5 (15)
Rnd 52: (3sc, scdec) x3 (12)
Rnd 53 – Rnd 54: 1sc in each stitch around (12)
Do not fasten off, continue to the head.

The body is finished! Remember to stuff firmly the upper part of the body and a neck and
we’re ready to start making the head.

HEAD
Stuff as you go
Continue with the Oatmilk yarn.
Rnd 55: scinc x 12 (24)
Rnd 56: (1sc, scinc) x12 (36)
Rnd 57: (5sc, scinc) x6 (42)
Rnd 58: (6sc, scinc) x6 (48)
Rnd 59: (7sc, scinc) x6 (54)
Rnd 60 – Rnd 70: 1sc in each stitch around – 11 rounds (54)
Rnd 71: (7sc, scdec) x6 (48)

Insert the eyes between rounds 63 and 64, approximately nine visible stitches apart. I used
8mm safety eyes, but feel free to use bigger or smaller eyes or even embroider them if you
like. Stuff the head firmly as you go.

Rnd 72: (6sc, scdec) x6 (42)

Rnd 73: (5sc, scdec) x6 (36)
Rnd 74: (4sc, scdec) x6 (30)
Rnd 75: (3sc, scdec) x6 (24)
Rnd 76: (1sc, scdec) x8 (16)
Rnd 77: scdec x8 (8)

Fasten off, close the last round by weaving remaining yarn through front loops of all 8
stitches. Pull tightly and weave in all ends. Now it’s a good time to embroider the details of
the eyes. Embroider a nose between the eyes on the rounds 62 and 63.

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 6

SKIRT
With the Orange yarn

Holding a doll upside down, attach an orange yarn at the back into the front loop of Rnd 42
of the body.
Rnd 1: FLO, ch1(doesn’t count as a stitch), 1sc into the same stitch, scinc, (1sc, scinc) x14 (45)
Rnd 2: (2sc, scinc) x15 (60)
Rnd 3 – Rnd 11: 1sc in each stitch around – 9 rounds (60)
Fasten off and weave in ends.

ARM (make 2)
With the Oatmilk yarn. Stuff as you go.

Rnd 1: 6sc into MR (6)

Rnd 2: scinc x6 (12)
Rnd 3 – Rnd 6: 1sc in each stitch around - 4 rounds (12)
Rnd 7: (4sc, scdec) x2 (10)
Stuff the hand firmly and the rest of the arm very lightly. Do not stuff the upper part of the
arm.
Rnd 8 – Rnd 18: 1sc in each stitch around – 11 rounds (10)
At the end of Rnd 18 change the yarn for the Charcoal, do not fasten off the Oatmilk.
Rnd 19 - Rnd 20: 1sc in each stitch around – 2 rounds (10)
At the end of Rnd 20 change the yarn back to the Oatmilk and fasten off the Charcoal.
Rnd 21 – Rnd 22: 1sc in each stitch around (10)
Flatten the arm and crochet 4sc through both layers. Leave the long tail. Make second arm
in the same way. Sew the arms to each side of the body between Rounds 50 and 51.

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 7

HAIR
With the Greyish Purple yarn

Chain 25, sc into the second ch from the hook, [ch40, hdc into second ch from the hook,
38hdc back down the chain, slst into the next st], repeat […] 23 times. You should have 24
strands of hair at the end.
Fold a foundation chain in a half with the right side of the hair strands facing each other and
join with a row of sc.

Now, we’re going to attach hair to Heather’s head. To do so, unfold the hair wig and pin it to
the head, style as you like, then attach the hair using fabric glue or just simply sew them to
the head.

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 8

WING (make 2)
With the Charcoal yarn

Ch 20
Row 1: sc into second chain from the hook, 18sc, ch1 turn (19)
Row 2: 17sc, ch1 turn (17)
Row 3: 15sc, ch1 turn (15)
Row 4: 13sc, ch1 turn (13)
Row 5: 11sc, ch1 turn (11)
Row 6: 9sc, ch1, turn (9)
Row 7: 9sc, 1sc in a top of the first bump, 1sc in the top of the second bump, ch1, turn (11)
Row 8: 9sc, ch1, turn (9)
Row 9: 11sc (11)
Slst into the last stitch. Fasten off, leaving a long tail to sew the wings into the back of the
body.

HAT
With the Charcoal yarn

Rnd 1: 6sc into the MR (6)

Rnd 2: sc in each stitch around (6)
Rnd 3: (sc, scinc) x3 (9)
Rnd 4: sc in each stitch around (9)
Rnd 5: (2sc, scinc) x3 (12)
Rnd 6: sc in each stitch around (12)
Rnd 7: (3sc, scinc) x3 (15)
Rnd 8: sc in each stitch around (15)
Rnd 9: (4sc, scinc) x3 (18)
Rnd 10: sc in each stitch around (18)

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 9

Rnd 11: (2sc, scinc) x6 (24)
Rnd 12: sc in each stitch around (24)
Rnd 13: (3sc, scinc) x6 (30)
Rnd 14: sc in each stitch around (30)
Rnd 15: (4sc, scinc) x6 (36)
Rnd 16: sc in each stitch around (36)
Rnd 17: (5sc, scinc) x6 (42)
Rnd 18: (6sc, scinc) x6 (48)
Rnd 19: sc in each stitch around (48)
Rnd 20: (7sc, scinc) x6 (54)
Rnd 21: sc in each stitch around (54)
Rnd 22: (8sc, scinc) x6 (60)
Rnd 23: sc in each stitch around (60) Change to the Orange yarn, do not fasten off the
Charcoal.
Rnd 24 – Rnd 25: sc in each stitch around – 2 rounds (60) Change to the Charcoal yarn,
fasten off the Orange.
Rnd 26: sc in each stitch around (60)
Rnd 27: FLO, 2sc in each stitch around (120)
Rnd 28 – Rnd 30: sc in each stitch around – 3 rounds (120)

Fasten off and weave in all ends.

Our fairy is ready. Now it’s time to make her little friend.

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 10

TINKER THE LITTLE GHOST

BODY
With the White yarn.

Rnd 1: 6sc into MR (6)

Rnd 2: scinc x6 (12)
Rnd 3: (1sc, scinc) x6 (18)
Rnd 4: (2sc, scinc) x6 (24)
Rnd 5: (3sc, scinc) x6 (30)
Rnd 6: (4sc, scinc) x6 (36)
Rnd 7: (5sc, scinc) x6 (42)
Rnd 8 – Rnd 14: sc in each stitch around – 7 rounds (42)
Rnd 15: (6sc, scinc) x6 (48)
Rnd 16 – Rnd 22: sc in each stitch around – 7 rounds (48)

Insert the eyes between rounds 13 and 14, approximately six visible stitches apart. I used
6mm safety eyes, but feel free to use bigger or smaller eyes or even embroider them if you
like. Embroider a little smiley face between the eyes on the rounds 14 and 15. Using a pink
thread embroider the cheeks.

Rnd 23: BLO, (6sc, scdec) x6 (42)

Rnd 24: (5sc, scdec) x6 (36)
Rnd 25: (4sc, scdec) x6 (30)

Start stuffing the body and stuff as you go quite firm but try to not overstuff, keeping the
base nice and flat.

Rnd 26: (3sc, scdec) x6 (24)

Rnd 27: (2sc, scdec) x6 (18)
Rnd 28: scdec x9 (9)

Fasten off, leaving a long tail. Using a needle weave the yarn tail through the front loops of
all 9sts and pull it tight. Weave in ends.
Now it’s time to make the fringe.

FRINGE
With the White yarn.

Attach yarn with a slipknot to the Front Loop of the Round 23. Make 1sc into the same stitch
as join. Now crochet 1hdc, 3dc into the same stitch, 1hdc, 1sc, slst.
Repeat this sequence [1sc, 1hdc, (3dc into the same stitch), 1hdc, 1sc, slst] seven more
times. Join into the first sc of the round.
Fasten off and weave in ends.

ARM (make 2)
With the White yarn. Do not stuff.

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 11

Rnd 1: 6sc into MR (6)
Rnd 2: (1sc, scinc) x3 (9)
Rnd 3 – Rnd 6: sc in each stitch around – 4 rounds (9)

Flatten the arm and crochet 4sc through both layers. Make second arm in the same way.
Sew the arms to each side of the body diagonally between Rounds 14 and 18, about four
stitches from the eyes.

TINKER’S HAT
With the Charcoal yarn

Repeat Rnd 1 – Rnd 17 of Heather’s hat. Change to the Orange yarn, do not fasten off the
Charcoal.
Rnd 18: (6sc, scinc) x6 (48)
Rnd 19: sc in each stitch around (48)
Change to the Charcoal yarn and fasten off the Orange.
Rnd 20: (7sc, scinc) x6 (54)
Rnd 21: FLO, 2sc in each stitch around (108)
Rnd 22 – 23: sc in each stitch around – 2 rounds (108)

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 12

CLOVER (make 2)
With the Sage yarn

Into the MR (ch2, 3dc, sc, slst) x4

Fasten off, leave a long tail for sewing clover to the hat.

Enjoy!
@onecraftymagpie

Heather and Tinker | No. 1338-243-9160 | © Hobbii 2024 | 13