K2 Collision and Customs Workfile ID: 37874329
PartsShare: 87KGf6
Your best decision after a collision Federal ID: 86-1233797
2341 230th St, Ames, IA 50014
Phone: (515) 292-2113
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
Written By: Kaleb Kemp
Insured: Sikder, Rabiul Policy #: Claim #:
Type of Loss: Date of Loss: Days to Repair: 0
Point of Impact:
Owner: Inspection Location: Insurance Company:
Sikder, Rabiul K2 Collision and Customs
(515) 232-0297 Business 2341 230th St
Ames, IA 50014
Repair Facility
(515) 292-2113 Business
VEHICLE
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
VIN: 5NPD84LF4JH355548 Interior Color: Mileage In: Vehicle Out:
License: Exterior Color: Mileage Out:
State: Production Date: Condition: Job #:
TRANSMISSION Overhead Console AM Radio Hands Free Device
Automatic Transmission CONVENIENCE FM Radio Blind Spot Detection
POWER Air Conditioning Stereo SEATS
Power Steering Intermittent Wipers Search/Seek Cloth Seats
Power Brakes Tilt Wheel Auxiliary Audio Connection Bucket Seats
Power Windows Cruise Control Satellite Radio Reclining/Lounge Seats
Power Locks Rear Defogger SAFETY WHEELS
Power Mirrors Keyless Entry Drivers Side Air Bag Aluminum/Alloy Wheels
Heated Mirrors Alarm Passenger Air Bag PAINT
DECOR Steering Wheel Touch Controls Anti-Lock Brakes (4) Clear Coat Paint
Dual Mirrors Telescopic Wheel 4 Wheel Disc Brakes OTHER
Tinted Glass Backup Camera Front Side Impact Air Bags Traction Control
Console/Storage RADIO Head/Curtain Air Bags Stability Control
10/3/2024 1:03:23 PM 455360 Page 1
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
Line Oper Description Part Number Qty Extended Labor Paint
Price $
1 # Quoted based on inspection only 1
2 # Additional 1
damage/operations/materials
may arise
Note: Vehicle may have additional damage/labor/fitting time due to damage unseen during inspection
3 FRONT BUMPER & GRILLE
4 R&I R&I bumper cover 1.4
5 Repl LT Side retainer 86513F3000 1 39.15 0.1
6 # Remove and install head light for 1 0.2
access
7 # S01 Repl Bumper to fender bracket bolts 3 3.75
(driver side) *missing*
8 # S01 Repl Bumper to wheel liner clips 6 7.20
*missing* 3 per side
9 # S01 Repl Wheel liner clips and screws 12 12.60
*missing*
10 # S01 Clips for passeger side wheel liner 10 9.50
11 # S01 Hood latch cable repair 1 0.4
Note: Hood would not open for technician. Tech has close to 1.0 hour. Charged for 0.5
12 # S01 Bumper clips *missing* upper 12 14.40
and lower
13 FENDER
14 ** Repl A/M CAPA RT Fender 66320F2000 1 619.00 2.1 2.5
Note: OEM fender cost $806
15 Add for Clear Coat 1.0
16 Repl LT Fender liner 86811F3000 1 164.18 0.4
17 Repl LT Fender liner grommet 86848C8000 1 1.65
18 R&I RT Pillar molding Incl.
19 * Repl LT Fender liner clip 1420608250B 9 9.72
20 MISCELLANEOUS OPERATIONS
21 * Repl Color test card 1 0.0 0.3
22 # S01 Flex additive per scale 1 8.00
SUBTOTALS 889.15 4.6 3.8
10/3/2024 1:03:23 PM 455360 Page 2
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
ESTIMATE TOTALS
Category Basis Rate Cost $
Parts 889.15
Body Labor 4.6 hrs @ $ 72.00 /hr 331.20
Paint Labor 3.8 hrs @ $ 72.00 /hr 273.60
Paint Supplies 3.8 hrs @ $ 52.00 /hr 197.60
Body Supplies 4.6 hrs @ $ 8.00 /hr 36.80
Subtotal 1,728.35
Sales Tax $ 1,728.35 @ 7.0000 % 120.98
Grand Total 1,849.33
10/3/2024 1:03:23 PM 455360 Page 3
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
SUPPLEMENT SUMMARY
Line Oper Description Part Number Qty Extended Labor Paint
Price $
Changed Items
16 # Flex additive per scale 1 -10.90
22 # S01 Flex additive per scale 1 8.00
Added Items
7 # S01 Repl Bumper to fender bracket bolts 3 3.75
(driver side) *missing*
8 # S01 Repl Bumper to wheel liner clips 6 7.20
*missing* 3 per side
9 # S01 Repl Wheel liner clips and screws 12 12.60
*missing*
10 # S01 Clips for passeger side wheel liner 10 9.50
11 # S01 Hood latch cable repair 1 0.4
NOTE: Hood would not open for technician. Tech has close to 1.0 hour. Charged for 0.5
12 # S01 Bumper clips *missing* upper 12 14.40
and lower
SUBTOTALS 44.55 0.4 0.0
TOTALS SUMMARY
Category Basis Rate Cost $
Parts 44.55
Body Labor 0.4 hrs @ $ 72.00 /hr 28.80
Body Supplies 0.4 hrs @ $ 8.00 /hr 3.20
Subtotal 76.55
Sales Tax $ 76.55 @ 7.0000 % 5.36
Additional Supplement Taxes -0.01
Total Supplement Amount 81.90
NET COST OF SUPPLEMENT 81.90
10/3/2024 1:03:23 PM 455360 Page 4
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
CUMULATIVE EFFECTS OF SUPPLEMENT(S)
Estimate 1,767.43 Kaleb Kemp
Supplement S01 81.90 Kaleb Kemp
Job Total: $ 1,849.33
This damage assessment is based off of OEM procedures. Any aftermarket parts may void any warranty shop
provides. If wheels were taken off during repair process, lug nuts will need to be retorqued after 45 miles.
THIS ESTIMATE HAS BEEN PREPARED BASED ON THE USE OF AFTERMARKET CRASH PARTS SUPPLIED BY A
SOURCE OTHER THAN THE MANUFACTURER OF YOUR MOTOR VEHICLE. ANY WARRANTIES APPLICABLE TO THESE
REPLACEMENT PARTS ARE PROVIDED BY THE MANUFACTURER OR DISTRIBUTOR OF THESE PARTS RATHER THAN
THE MANUFACTURER OF YOUR VEHICLE.
10/3/2024 1:03:23 PM 455360 Page 5
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
Estimate based on MOTOR CRASH ESTIMATING GUIDE and potentially other third party sources of data. Unless
otherwise noted, (a) all items are derived from the Guide ARR1058, CCC Data Date 09/17/2024, and potentially other
third party sources of data; and (b) the parts presented are OEM-parts. OEM parts are manufactured by or for the
vehicle's Original Equipment Manufacturer (OEM) according to OEM's specifications for U.S. distribution. OEM parts
are available at OE/Vehicle dealerships or the specified supplier. OPT OEM (Optional OEM) or ALT OEM (Alternative
OEM) parts are OEM parts that may be provided by or through alternate sources other than the OEM vehicle
dealerships with discounted pricing. Asterisk (*) or Double Asterisk (**) indicates that the parts and/or labor data
provided by third party sources of data may have been modified or may have come from an alternate data source.
Tilde sign (~) items indicate MOTOR Not-Included Labor operations. The symbol (<>) indicates the refinish
operation WILL NOT be performed as a separate procedure from the other panels in the estimate. Non-Original
Equipment Manufacturer aftermarket parts are described as Non OEM, A/M or NAGS. Used parts are described as
LKQ, RCY, or USED. Reconditioned parts are described as Recond. Recored parts are described as Recore. NAGS
Part Numbers and Benchmark Prices are provided by National Auto Glass Specifications. Labor operation times listed
on the line with the NAGS information are MOTOR suggested labor operation times. NAGS labor operation times are
not included. Pound sign (#) items indicate manual entries.
Some 2024 vehicles contain minor changes from the previous year. For those vehicles, prior to receiving updated
data from the vehicle manufacturer, labor and parts data from the previous year may be used. The CCC ONE
estimator has a list of applicable vehicles. Parts numbers and prices should be confirmed with the local dealership.
The following is a list of additional abbreviations or symbols that may be used to describe work to be done or parts to
be repaired or replaced:
SYMBOLS FOLLOWING PART PRICE:
m=MOTOR Mechanical component. s=MOTOR Structural component. T=Miscellaneous Taxed charge category.
X=Miscellaneous Non-Taxed charge category.
SYMBOLS FOLLOWING LABOR:
D=Diagnostic labor category. E=Electrical labor category. F=Frame labor category. G=Glass labor category.
M=Mechanical labor category. S=Structural labor category. (numbers) 1 through 4=User Defined Labor Categories.
OTHER SYMBOLS AND ABBREVIATIONS:
Adj.=Adjacent. Algn.=Align. ALU=Aluminum. A/M=Aftermarket part. Blnd=Blend. BOR=Boron steel.
CAPA=Certified Automotive Parts Association. CFC=Carbon Fiber.
D&R=Disconnect and Reconnect. HSS=High Strength Steel. HYD=Hydroformed Steel. Incl.=Included. LKQ=Like
Kind and Quality. LT=Left. MAG=Magnesium. Non-Adj.=Non Adjacent. NSF=NSF International Certified Part.
O/H=Overhaul. Qty=Quantity. Refn=Refinish. Repl=Replace. R&I=Remove and Install. R&R=Remove and
Replace. Rpr=Repair. RT=Right. SAS=Sandwiched Steel. Sect=Section. STS=Stainless Steel. Subl=Sublet.
UHS=Ultra High Strength Steel. N=Note(s) associated with the estimate line.
CCC ONE Estimating - A product of CCC Intelligent Services Inc.
The following is a list of abbreviations that may be used in CCC ONE Estimating that are not part of the MOTOR
CRASH ESTIMATING GUIDE:
BAR=Bureau of Automotive Repair. EPA=Environmental Protection Agency. NHTSA= National Highway
Transportation and Safety Administration. PDR=Paintless Dent Repair. VIN=Vehicle Identification Number.
10/3/2024 1:03:23 PM 455360 Page 6
Preliminary Supplement 1 with Summary
Customer: Sikder, Rabiul Job Number:
2018 HYUN Elantra SEL Automatic SULEV (Alabama Plant) 4D SED 4-2.0L Gasoline Sequential MPI
PARTS SUPPLIER LIST
Line Supplier Description Price
14 Auto Body Specialties.Inc-Waterloo #HY1241166PP $ 619.00
100 E. 5TH STREET A/M CAPA RT Fender
WATERLOO IA 50703
(800) 258-8885
(319) 234-4273
10/3/2024 1:03:23 PM 455360 Page 7
