Operating Instructions

Compact Stereo System

Model No. SC-HC200

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.

EB EG TQBJ2131-4
 Your system and the illustrations can look differently.
Safety precautions

WARNING!
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases,
on this unit.
– Use the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Bottom of product
– Do not let metal objects fall inside this unit.

Product Identification Marking is located on the bottom

of the unit. CAUTION!
Unit
The holes at the back are used only by the retailers for • To reduce the risk of fire, electric shock or product
product display purposes. damage,
Panasonic cannot be held responsible for any property – Do not install or place this unit in a bookcase, built-in
damage and/or serious injury, including death resulting cabinet or in another confined space. Ensure this unit
from improper use of these holes. is well ventilated.
– Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
– Do not place sources of naked flames, such as
lighted candles, on this unit.
Table of contents • This unit is intended for use in moderate climates.
• This unit may receive radio interference caused by
mobile telephones during use. If such interference
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 occurs, please increase separation between this unit
Caution for AC mains lead . . . . . . . . . . . . . . . . . . . . . . . 3 and the mobile telephone.
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 • This unit utilizes a laser. Use of controls or adjustments
Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 or performance of procedures other than those
Making the connections . . . . . . . . . . . . . . . . . . . . . . . . . 4 specified herein may result in hazardous radiation
Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 exposure.
Preparing the remote control . . . . . . . . . . . . . . . . . . . . . 5
AC mains lead
Preparing the media . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 • The mains plug is the disconnecting device. Install this
Media playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 unit so that the mains plug can be unplugged from the
Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 socket outlet immediately.
Clock and timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Battery
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 • Danger of explosion if battery is incorrectly replaced.
Replace only with the type recommended by the
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
manufacturer.
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• When disposing of the batteries, please contact your
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 local authorities or dealer and ask for the correct
method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and
windows closed.
• Do not break open or short-circuit the battery.
• Do not charge the alkaline or manganese battery.
• Do not use the battery if the cover has peeled off.
• Remove the battery if you do not use the remote control
for a long period of time. Keep in a cool, dark area.
TQBJ2131

2
Caution for AC mains lead References
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
About Bluetooth®
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience. Panasonic cannot be held responsible for data and/or
A 5-ampere fuse is fitted in this plug. information that is compromised during a wireless
Should the fuse need to be replaced please ensure that transmission.
the replacement fuse has a rating of 5-ampere and that it
is approved by ASTA or BSI to BS1362. Frequency band
• This system uses the 2.4 GHz frequency band.
Check for the ASTA mark or the BSI mark on the
body of the fuse. Certification
• This system conforms to the frequency restrictions and
If the plug contains a removable fuse cover you must has received certification based on frequency laws.
ensure that it is refitted when the fuse is replaced. Thus, a wireless permit is not necessary.
If you lose the fuse cover the plug must not be used until a • The actions below are punishable by law in some
replacement cover is obtained. countries:
A replacement fuse cover can be purchased from your – Taking apart or modifying the unit.
local dealer. – Removing specification indications.
Before use Restrictions of use
Remove the connector cover. • Wireless transmission and/or usage with all Bluetooth®
How to replace the fuse equipped devices is not guaranteed.
The location of the fuse differ according to the type of AC • All devices must conform to standards set by the
mains plug (figures A and B). Confirm the AC mains plug Bluetooth SIG, Inc.
fitted and follow the instructions below. • Depending on the specifications and settings of a
Illustrations may differ from actual AC mains plug. device, it can fail to connect or some operations can be
different.
1. Open the fuse cover with a screwdriver. • This system supports Bluetooth® security features. But
Figure A Figure B depending on the operating environment and/or
settings, this security is possibly not sufficient. Transmit
Fuse cover data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth®
device.
Range of use
• Use this device at a maximum range of 10 m.
• The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this unit is located too close to
2. Replace the fuse and close or attach the fuse cover. other Bluetooth® devices or the devices that use the
2.4 GHz band.
Figure A Figure B
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
Fuse (5 ampere) environment that is sensitive to radio frequency
Fuse (5 ampere) interference (example: airports, hospitals, laboratories,
etc.).

License
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Panasonic Holdings Corporation is under
license. Other trademarks and trade names are those of
their respective owners.
TQBJ2131

3
 1 Connect the FM indoor antenna.
Supplied accessories Adhesive tape
Check and identify the supplied accessories. (not supplied)

Use numbers indicated in parentheses when asking for

replacement parts. (Product numbers correct as of August
2020. These may be subject to change.)
 1 AC mains lead
For the United Kingdom and Ireland For the United Kingdom and Ireland
(K2CT2YY00097) Connect the FM outdoor antenna.
For others Use an outdoor antenna if reception is poor.
(K2CQ2YY00164)
FM outdoor antenna
 1 FM indoor antenna (not supplied)
(RSAX0002)
75 Ω coaxial cable
(not supplied)
 For the United Kingdom and Ireland Antenna plug adaptor
1 Antenna plug adaptor
(K1YZ02000013) CAUTION!
Keep the antenna plug adaptor out of reach of
children to prevent swallowing.
Note:
 1 Remote control • Do not use the outdoor antenna (not supplied) during a
lightning storm.
(N2QAYB000984)
• Disconnect the outdoor antenna (not supplied) if you
do not use the system.
The symbols on this product (including the
accessories) represent the following: 2 Connect the AC mains lead.

AC (For the AC mains plug of three pins)

READ THE “Caution for AC mains lead” BEFORE
Class II equipment (The construction of the
CONNECTION.
product is double-insulated.)
! ON To household
mains socket
` Standby
Do not use any other AC mains lead except the
supplied one.
Conserving power
The system consumes a small amount of power
(~13) even when it is in standby mode. Disconnect
Making the connections the power supply if you do not use the system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Connect the AC mains lead only after all the other
connections have been made. Note:
• These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced by
magnetism.
• Tape the antenna to a wall with the least amount of
interference.
• Use an outdoor antenna (not supplied) if reception is poor.
TQBJ2131

4
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.

Top view

A Standby/on switch [`], [1] K View the play menu

Press to switch the unit from on to standby mode or
L Select the sound effects
vice versa. In standby mode, the unit is still consuming
a small amount of power. M USB port ( )
B Select the audio source N Sliding door
On the remote control:
Press the corresponding button to select the source. O Display panel
[ ]: BLUETOOTH P Remote control sensor
[USB/CD]: USB CD Distance: Within approximately 7 m
[RADIO]: FM Angle: Approximately 20° up and down, 30° left
On the main unit: and right

Select “BLUETOOTH” as the audio source

Preparing the remote control

To start Bluetooth® pairing or disconnect a Bluetooth
device, press and hold the corresponding button.
C Basic playback control
D View the setup menu
E View the content information
F Select or confirm the option
G Open or close the sliding door
H Decrease the brightness of the display panel
To cancel, press the button again.
I Adjust the volume level (not supplied)
J Mute the sound Use alkaline or manganese battery.
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume Install the battery so that the poles (+ and –) align with
or when you switch off the system. those in the remote control.
TQBJ2131

5
 █ Pairing a device
Preparing the media Preparation
If this system is connected to a Bluetooth® device,
disconnect it. (~below)
Disc 1 Press [ ] to select “BLUETOOTH”.
1 Press [USB/CD] to select “CD”.
If “PAIRING” is shown, continue with step 3.

2 Press [CD x] (main unit: [x]) to open the sliding

2 Press [PLAY MENU] to select “PAIRING”.
door. Or press and hold [ –PAIRING] on the main unit until
“PAIRING” is shown.
Put in a disc with the label facing towards you.
3 Select “SC-HC200” from the Bluetooth® menu of
the device.
If prompted for a passkey, input “0000”.
The device connects with this system automatically
after pairing is complete.
The MAC address (example: 6C:5A:B5:B3:1D:0F)
may be shown before “SC-HC200” is shown.
3 Press [CD x] (main unit: [x]) again to close the The name of the connected device is shown for a few
sliding door. seconds.
Keep fingers away from the sliding door when it is Note:
closing. You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
USB
█ Connecting a device
USB device Preparation
(not supplied) If this system is connected to a Bluetooth® device,
disconnect it. (~below)

1 Press [ ] to select “BLUETOOTH”.

“BLUETOOTH READY” is shown.
2 Select “SC-HC200” from the Bluetooth® menu of
the device.
The name of the connected device is shown for a few
seconds.
3 Start playback on the device.
Note:
• A device must be paired to connect.
• This system can only connect to one device at a time.
Press [USB/CD] to select “USB”. • When “BLUETOOTH” is selected as the source, this system
Note: will automatically try to connect to the last connected device.
Do not use a USB extension cable. The system cannot (“LINKING” is shown during this process.)
recognise USB device connected through a cable.
█ Disconnecting a device
Bluetooth ® 1 Press [ ] to select “BLUETOOTH”.

You can connect and play an audio device wirelessly 2 Press [PLAY MENU] repeatedly to select
through Bluetooth®. “DISCONNECT?”.
Preparation 3 Press [R, T] to select “OK? YES” and then press
• Switch on the Bluetooth® feature of the device and put [OK].
the device near the system.
• Read the operating instructions of the device for details. Note:
A device is disconnected when you:
• Select a different source.
• Move the device out of the maximum range.
• Disable the Bluetooth® transmission of the device.
• Switch off the system or the device.
TQBJ2131

6
Link mode Viewing available information
You can change the link mode to suit the connection type. CD USB BLUETOOTH
Preparation You can view the available information on the display
If this system is connected to a Bluetooth® device, panel.
disconnect it. (~6)
Press [DISPLAY] repeatedly.
1 Press [PLAY MENU] repeatedly to select
Note:
“LINK MODE”. • Maximum characters that can be shown: Approximately 32
2 Press [R, T] to select the mode and then press • This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
[OK]. • Text data that the system does not support can show
differently.
MODE 1 Emphasis on connectivity. • Example: MP3 album and track number display.
MODE 2 (default) Emphasis on sound quality.
Note:
• Depending on the device, the playback image and sound
may not be synchronised. In this case, select “MODE 1”.
• Select “MODE 1” if the sound is interrupted. Album Track
number number

Input level
You can change the input level setting if the sound input Play menu
level of the Bluetooth® transmission is too low.
CD USB
1 Press [PLAY MENU] repeatedly to select
“INPUT LEVEL”. 1 Press [PLAY MENU] repeatedly to select
“PLAYMODE” or “REPEAT”.
2 Press [R, T] to select the level and then press
[OK]. 2 Press [R, T] to select the setting and then press
[OK].

PLAYMODE
Note: OFF Cancel the setting.
• The default setting is “LEVEL 0”. PLAYMODE
• Select “LEVEL 0” if the sound is distorted.
1-TRACK Play one selected track.
1 Press [2/3] or [5/6] to
select the track.

Media playback 1-ALBUM

1
Play one selected MP3 album.
Press [R, T] to select the MP3 album.
The following marks indicate the availability of the feature. RANDOM Play all tracks randomly.
RND
CD : CD-R/RW in CD-DA format or with MP3 files.
1-ALBUM Play all tracks in one selected MP3
USB : USB device with MP3 files.
RANDOM album randomly.
BLUETOOTH : Bluetooth® device.
1 RND Press [R, T] to select the MP3 album.
REPEAT
Basic playback OFF REPEAT Cancel the setting.
CD USB BLUETOOTH ON REPEAT Repeat playback.

Play Press [4/9].

Note:
Stop Press [8]. • During random playback, you cannot skip to tracks which
USB
have been played.
The position is memorised. • The setting is cancelled when you open the sliding door or
“RESUME” is shown. disconnect the USB device.
Press again to stop fully.
Pause Press [4/9].
Press again to continue playback.
Skip Press [2/3] or [5/6] to skip track.
CD USB
Press [R, T] to skip MP3 album.
TQBJ2131

Search Press and hold [2/3] or [5/6].

Note:
Depending on the Bluetooth® device, some operations may
not work. 7
 █ Note on disc
• This system can play CD-R/RW with CD-DA or MP3 Radio
format content.
• This system can access up to: Preparation
– CD-DA: 99 tracks Press [RADIO].
• Before playback, finalise the disc on the device it was
recorded on.
• Some CD-R/RW cannot be played because of the Manual tuning
condition of the recording.
1 Press [PLAY MENU] repeatedly to select
█ Note on USB device “TUNE MODE”.
• This system does not guarantee connection with all
USB devices. 2 Press [R, T] to select “MANUAL” and then press
• This system supports USB 2.0 full speed. [OK].
• This system can support USB devices of up to 32 GB.
• Only FAT 12/16/32 file system is supported.
3 Press [2/3] or [5/6] to tune in to the
station.
To tune automatically, press and hold the button until
█ Note on MP3 file the frequency starts changing quickly.
• Files are defined as tracks and folders are defined as “STEREO” is shown when a stereo broadcast is being
albums. received.
• Tracks must have the extension “.mp3” or “.MP3”.
• Tracks will not necessarily be played in the order you
recorded them. Memory presetting
• Some files can fail to work because of the sector size.
You can preset up to 30 FM stations.
MP3 file on disc
• This system can access up to:
– 255 albums (including root folder) █ Automatic presetting
– 999 tracks
– 20 sessions 1 Press [PLAY MENU] to select “A.PRESET”.
• Disc must conform to ISO9660 level 1 or 2 (except for 2 Press [R, T] to select “LOWEST” or “CURRENT”
extended formats).
and then press [OK].
MP3 file on USB device The tuner presets all the stations it can receive into the
• This system can access up to: channels in ascending order.
– 800 albums (including root folder) To cancel, press [8].
– 8000 tracks
– 999 tracks in one album LOWEST Tuning begins from the lowest frequency.
CURRENT Tuning begins from the current frequency.

█ Manual presetting
1 Press [PLAY MENU] repeatedly to select
“TUNE MODE”.
2 Press [R, T] to select “MANUAL” and then press
[OK].
3 Press [2/3] or [5/6] to tune in to the
station.
4 Press [OK].

5 Press [R, T] to select a preset number and then

press [OK].
Repeat steps 3 to 5 to preset more stations.
The new station replaces any station that occupies the
same preset number.
TQBJ2131

8
█ Selecting a preset station
1 Press [PLAY MENU] repeatedly to select
Clock and timers
“TUNE MODE”.
2 Press [R, T] to select “PRESET” and then press Setting the clock
[OK].
This is a 24-hour clock.
3 Press [2/3] or [5/6] to select the preset
station. 1 Press [SETUP] repeatedly to select “CLOCK”.

2 Press [R, T] to set the time and then press [OK].

Improving the sound quality To check the time

1 Press [PLAY MENU] repeatedly to select

Press [SETUP] repeatedly to select “CLOCK” and
then press [OK].
“FM MODE”. In standby mode, press [DISPLAY].
2 Press [R, T] to select “MONO” and then press Note:
[OK]. Reset the clock regularly to maintain accuracy.
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the
frequency. Sleep timer
To memorise the setting The sleep timer switches off the system after the set time.
Continue with step 4 of “Manual presetting”. (~8)
1 Press [SETUP] repeatedly to select “SLEEP”.

Checking the signal status 2 Press [R, T] to select the setting (in minutes) and
then press [OK].
For Continental Europe To cancel, select “OFF”.
Press [DISPLAY] repeatedly to select “FM STATUS”.
For others
Press [DISPLAY].
Note:
FM - - - - The FM signal is in monaural. • The remaining time is shown at every minute except when
The system is not tuned in to a station. other operations are being performed.
“SLEEP 1” will always be shown when only 1 minute
FM ST The FM signal is in stereo.
remains.
FM MONO “MONO” is selected as the “FM MODE”. • The sleep timer always comes first. Be sure not to set an
overlap of timers.

Radio Data System broadcasting

Play timer
This system can show the text data transmitted by the
Radio Data System available in some areas. You can set the timer to come on at a certain time to wake
you up.
Press [DISPLAY] repeatedly.
Preparation
PS Programme service Set the clock.
PTY Programme type 1 Press [SETUP] repeatedly to select “TIMER ADJ”.
FREQ Frequency
2 Press [R, T] to set the start time and then press
Note: [OK].
Radio Data System may not be available if reception is poor.
3 Repeat step 2 to set the end time.

4 Press [R, T] to select the music source you want

to play and then press [OK].
To start the timer
1 Press [SETUP] repeatedly to select “TIMER SET”.

2 Press [R, T] to select “SET” and then press [OK].

“#” is shown.
To cancel, select “OFF”.
The system must be switched off for the timer to
operate.
TQBJ2131

9
 To check the setting
Press [SETUP] repeatedly to select “TIMER ADJ” and
then press [OK].
Others
In standby mode, press [DISPLAY] two times.
Note:
• The timer starts at a low volume and increases gradually to
Auto off
the preset level. This system automatically switches off when you do not
• The timer comes on at the set time every day if the timer is use it for approximately 20 minutes.
on.
• If you switch off the system and then switch on again while a 1 Press [SETUP] repeatedly to select “AUTO OFF”.
timer is in operation, the timer will not stop at the end time.
• “CD”, “USB” and “FM” can be set as the music source. 2 Press [R, T] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
This function does not work when you are in radio source or
when a Bluetooth® device is connected.
Sound effects
1 Press [SOUND] repeatedly to select the sound
Bluetooth® standby
effect. This function automatically switches on the system when
2 Press [R, T] to select the setting and then press you establish a Bluetooth® connection from a paired
device.
[OK].

MY SOUND “SOUND 1”, “SOUND 2” or

1 Press [SETUP] repeatedly to select
“SOUND 3” (~below) “BLUETOOTH STANDBY”.

PRESET EQ “HEAVY”, “SOFT”, “CLEAR”, 2 Press [R, T] to select “ON” and then press [OK].
“VOCAL” or “FLAT” To cancel, select “OFF”.
BASS –4 to +4
TREBLE –4 to +4 Software update
D.BASS “ON D.BASS” or “OFF D.BASS”
Occasionally, Panasonic may release updated software
SURROUND “ON SURROUND” or for this unit that may add or improve the way a feature
“OFF SURROUND” operates. These updates are available free of charge.
Note: For more details, refer to the following website.
Changed settings will be kept until it is changed again, unless http://panasonic.jp/support/global/cs/
otherwise indicated. (This site is in English only.)

█ Checking the software version

Saving the sound settings
1 Press [SETUP] repeatedly to select “SW VER.”
You can save the current sound effects (up to and then press [OK].
3 combinations). The software version is shown.
Preparation 2 Press [OK] again to exit.
Select the sound effects.

1 Press [SETUP] to select “SAVE MY SOUND”.

2 Press [R, T] to select a sound setting number and

then press [OK].
“SAVED” is shown.
The new setting replaces the one existing in the same
sound setting number.
To recall the setting
1 Press [SOUND] to select “MY SOUND”.

2 Press [R, T] to select the sound setting number

and then press [OK].
TQBJ2131

10
 The elapsed time shown is different from the actual play
Troubleshooting time.
• Transfer the data to another USB device or backup the data
and reformat the USB device.
Before requesting service, make the following checks. If
you are in doubt about some of the check points, or if the
solutions indicated do not solve the problem, consult your █ Bluetooth®
dealer for instructions. Pairing cannot be done.
• Check the Bluetooth® device condition.
█ Common problems • The device is out of the 10 m communication range.
Move the device nearer to the system.
The unit cannot be switched on.
• Connect the AC mains lead and wait for a minimum of The device cannot be connected.
10 seconds before switching on the unit. • The pairing of the device was unsuccessful. Do pairing
again.
The unit does not work. • The pairing of the device has been replaced. Do pairing
• The safety device has been activated. Do the following: again.
1. Press [1] on the main unit to switch the unit to standby • This system might be connected to a different device.
mode. If the unit does not switch to standby mode, Disconnect the other device and try connecting the device
disconnect the AC mains lead and connect it again. again.
2. Press [1] again to switch on the unit. If the problem • The system may have a problem. Switch off the system and
persists, consult your dealer. then switch on again.
No operations can be done with the remote control. • If “MODE 2” is selected in “LINK MODE”, select “MODE 1”.
• Examine that the battery is installed correctly. (~7)
Sound is distorted or no sound. The device is connected but audio cannot be heard
• Adjust the volume of the system. through the system.
• Switch off the system, determine and correct the cause, and • For some built-in Bluetooth® devices, you have to set the
then switch on again. It can be caused by straining of the audio output to “SC-HC200” manually. Read the operating
speakers through excessive volume or power, and when instructions of the device for details.
using the system in a hot environment. Sound from the device is interrupted.
A humming sound can be heard during playback. • The device is out of the 10 m communication range.
• An AC mains lead or fluorescent light is near the cables. Move the device nearer to the system.
Keep other appliances and cords away from the cables of • Remove any obstacle between the system and the device.
this system. • Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.) are
Noise is heard. interfering. Move the device nearer to the system and
• Depending on the device, noise may be heard if the device distance it from the other devices.
is connected to the USB port at the same time. Disconnect • Select “MODE 1” for stable communication. (~7)
the cable from the USB port.
█ Radio
█ Disc
Sound is distorted or static is heard.
Display not shown correctly.
• Check that the antenna(s) is properly connected. (~4)
Playback does not start.
• Adjust the position of the antenna.
• You have not put in the disc correctly. Put it in correctly.
• Keep a certain amount of distance between the antenna
• Disc is dirty. Clean the disc.
and the AC mains lead.
• Replace the disc if it is scratched, warped, or non-standard. • Use an outdoor antenna if there are buildings or mountains
• There is condensation. Let the system dry for 1 to 2 hours. nearby.
The total number of tracks displayed is incorrect. • Switch off the TV or other audio players or separate it from
The disc cannot be read. the system.
Distorted sound is heard. • Keep the system away from mobile phones if there is
• You put in a disc that the system cannot play. Change to a interference.
playable disc.
If there is excessive noise during FM reception.
• You put in a disc that has not been finalised. • Change the audio output to monaural. (~9)

█ USB
No response when you press [4/9].
• Disconnect the USB device and then connect it again.
Alternatively, switch the unit off and on again.
The USB device or the contents in it cannot be read.
• The format of the USB device or the contents in it are not
compatible with the system.
• USB devices with storage capacity of more than 32 GB
cannot work in some conditions.
Slow operation of the USB device.
TQBJ2131

• Large content size or large memory USB device takes

longer time to read.

11
 █ Main unit displays “USB OVER CURRENT ERROR”
• The USB device is using too much power. Disconnect the
“--:--” USB device, switch off the system and then switch on again.
• You connected the AC mains lead for the first time or there • Check the connection, it may be caused by a faulty USB
was a power failure recently. Set the clock. cable.
“ADJUST CLOCK” “VBR”
• The clock is not set. Adjust the clock. • The system cannot show the remaining play time for
variable bit rate (VBR) tracks.
“ADJUST TIMER”
• The play timer is not set. Adjust the play timer. “NOT SUPPORTED”
• You have connected an unsupported USB device.
“AUTO OFF”
• The system has not been used for 20 minutes and will
Remote control code
switch off within a minute. To cancel, press any button.
“ERROR”
• An incorrect operation was done. Read the instructions and When other Panasonic equipment responds to the remote
try again. control of this system, change the remote control code for
“F61” this system.
“F77” Preparation
• Disconnect the AC mains lead and consult your dealer. Press [USB/CD] to select “CD”.
“F703”
• Examine the Bluetooth® connection. █ To set the code to “REMOTE 2”
• Disconnect the Bluetooth® device. Switch off the system
and then switch on again. 1 Press and hold [8] on the main unit and [USB/CD]
“F76” on the remote control.
• There is a problem with the power supply. “REMOTE 2” is shown.
• Disconnect the AC mains lead and consult your dealer. 2 Press and hold [OK] and [USB/CD] for a minimum
“ILLEGAL OPEN” of 4 seconds.
• The sliding door is not in a correct position. Switch off the
system and then switch on again. █ To set the code to “REMOTE 1”
“NO DEVICE”
• The USB device is not connected. Examine the connection. 1 Press and hold [8] on the main unit and [ ] on
the remote control.
“NO DISC”
“REMOTE 1” is shown.
• You have not put in a disc.
“NO PLAY” 2 Press and hold [OK] and [ ] for a minimum of
• Examine the content. You can only play supported format. 4 seconds.
• The files in the USB device may be corrupted. Format the
USB device and try again.
• The system may have a problem. Switch off the system and System memory reset
then switch on again.
Reset the memory when the following situations occur:
“NO SIGNAL” • There is no response when buttons are pressed.
• The station cannot be received. Adjust the antenna. • You want to clear and reset the memory contents.
“PLAYERROR”
• You played an unsupported MP3 file. The system will skip 1 Disconnect the AC mains lead.
that track and play the next one.
2 While you press and hold [1] on the main unit,
“LINKING” connect the AC mains lead again.
• This system is trying to connect to the last connected Continue to press and hold the button until
Bluetooth® device when “BLUETOOTH” is selected. “– – – – – – – – –” is shown.
“READING”
• The unit is checking the “CD/USB” information. After this
3 Release [1].
All the settings are set back to the factory preset.
display has disappeared, start operating.
It is necessary to set the memory items again.
“REMOTE 1”
“REMOTE 2”
• The remote control and the main unit are using different
codes. Change the code of the remote control.
– When “REMOTE 1” is shown, press and hold [OK] and
[ ] for a minimum of 4 seconds. Maintenance
– When “REMOTE 2” is shown, press and hold [OK] and
Disconnect the AC mains lead before maintenance.
[USB/CD] for a minimum of 4 seconds.
Clean this system with a soft, dry cloth.
“SOUND 1 NOT SET” • Never use alcohol, paint thinner or benzine to clean this
“SOUND 2 NOT SET”
TQBJ2131

system.
“SOUND 3 NOT SET” • Before using chemically treated cloth, read the
• You have not saved the sound effects into the sound setting instructions that came with the cloth carefully.
number.
12
Specifications
█ General █ USB section
Power supply AC 220 V to 240 V, 50 Hz USB port power WDC OUT 5 V 500 mA

Power consumption 14 14 W USB standard USB 2.0 full speed

Power consumption in standby mode 1 Media file format support MP3 (*.mp3)
(approximate) Audio support format MP3 2
With “BLUETOOTH STANDBY” set to “OFF” 0.2 W Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
With “BLUETOOTH STANDBY” set to “ON” 0.3 W
Audio word size 16 bits
Dimensions (W x H x D)4 400 mm x 197 mm x 107 mm Channel count 2 ch
Mass 1.9 kg USB device file system FAT12, FAT16, FAT32
Operating temperature range 0°C to +40°C
█ Bluetooth® section
Operating humidity range
35% to 80% RH (no condensation) Version
SC-HC200 Bluetooth® Ver. 2.1 + EDR
█ Amplifier section SC-HC200  Bluetooth® Ver. 4.2
RMS output power stereo mode Class Class 2
Front Ch (both ch driven) Supported profiles A2DP, AVRCP
10 W per channel (8 Ω), 1 kHz, 10% THD
Total RMS power 20 W Frequency band 2.4 GHz band FH-SS
Operation distance 10 m line of sight
█ Tuner, terminals section Supported codec SBC
Preset memory FM 30 stations See the label on the back of the product for the notation.
Frequency modulation (FM)
Frequency range
█ Speaker section
87.50 MHz to 108.00 MHz (50 kHz step) Speaker unit(s)
Antenna terminals 75 Ω (unbalanced) Full range 8 cm cone type x 2
Note:
█ Disc section • Specifications are subject to change without notice.
Disc played (8 cm or 12 cm) Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
CD, CD-R/RW (CD-DA, MP3 2) spectrum analyser.
Pick up 1
No device is connected to the USB port before switching to
Wavelength 790 nm (CD) standby mode.
2 MPEG-1 Layer 3, MPEG-2 Layer 3
NORSK
Bølgelengde 790 nm (CD)
Laserstyrke Ingen farlig stråling sendes ut TQBJ2131

13
 English Português
Declaration of Conformity (DoC) Declaração de Conformidade (DoC)
Hereby, “Panasonic Entertainment & Communication Co., Com o presente documento, a “Panasonic Entertainment
Ltd.” declares that this product is in compliance with the & Communication Co., Ltd.” declara que este produto se
essential requirements and other relevant provisions of encontra em conformidade com os requisitos específicos
Directive 2014/53/EU. e demais especificações referentes à Diretiva
Customers can download a copy of the original DoC to 2014/53/UE.
our RE products from our DoC Server: Os clientes podem baixar uma cópia da declaração de
https://www.ptc.panasonic.eu/compliance-documents conformidade (DoC) para nossos produtos RE do Server
Contact to Authorised Representative: DoC:
Panasonic Marketing Europe GmbH, Panasonic Testing https://www.ptc.panasonic.eu/compliance-documents
Centre, Winsbergring 15, 22525 Hamburg, Germany Contacto com um Representante Autorizado:
Panasonic Marketing Europe GmbH, Panasonic Testing
UK Declaration of Conformity (DoC) Centre, Winsbergring 15, 22525 Hamburg, Alemanha
Hereby, “Panasonic Entertainment & Communication Co., SC-HC200
Ltd.” declares that this product is in compliance with the
Tipo de ligação Banda de Potência máxima
essential requirements and other relevant provisions of
sem fios frequência (dBm e.i.r.p.)
the Radio Equipment Regulations 2017 No.1206.
Bluetooth® 2402 – 2480 MHz 4 dBm
Customers can download a copy of the original DoC to
our RE products from our DoC Server:
SC-HC200 
https://www.ptc.panasonic.eu/compliance-documents
Contact in the UK: Panasonic Testing Centre on behalf of Tipo de ligação Banda de Potência máxima
Panasonic UK, a branch of Panasonic Marketing Europe sem fios frequência (dBm e.i.r.p.)
GmbH (Importer) Bluetooth® 2402 – 2480 MHz 7 dBm
Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT Lietuviškai
SC-HC200 Atitikties deklaracija (AD)
Maximum power Bendrovė “Panasonic Entertainment & Communication
Type of wireless Frequency band
(dBm E.I.R.P.) Co., Ltd.” patvirtina, kad šis gaminys atitinka direktyvos
Bluetooth® 2402 – 2480 MHz 4 dBm 2014/53/ES esminius reikalavimus ir kitas taikytinas
nuostatas.
SC-HC200  Mūsų RE gaminių originalios atitikties deklaracijos kopiją
Type of wireless Maximum power klientai gali atsisiųsti iš mūsų AD serverio:
Frequency band
(dBm E.I.R.P.) https://www.ptc.panasonic.eu/compliance-documents
Bluetooth® 2402 – 2480 MHz 7 dBm Įgaliotojo atstovo adresas:
Panasonic Marketing Europe GmbH, Panasonic Testing
Ελληνικά Centre, Winsbergring 15, 22525 Hamburg, Vokietija
Δήλωση συμμόρφωσης (DoC) SC-HC200
Η “Panasonic Entertainment & Communication Co., Ltd.” Bevielio ryšio Dažnių Maksimali siuntimo
δηλώνει ότι το προϊόν αυτό είναι συμμορφωμένο προς τις tinklas diapazonas galia (dBm e.i.r.p.)
βασικές απαιτήσεις και άλλες σχετικές διατάξεις της
Bluetooth® 2402 – 2480 MHz 4 dBm
Οδηγίας 2014/53/EΕ.
Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο του SC-HC200 
πρωτοτύπου DoC για τα RE προϊόντα μας από τον DoC Bevielio ryšio Dažnių Maksimali siuntimo
server μας: tinklas diapazonas galia (dBm e.i.r.p.)
https://www.ptc.panasonic.eu/compliance-documents Bluetooth® 2402 – 2480 MHz 7 dBm
Επικοινωνήστε με τον Εξουσιοδοτημένο Αντιπροσωπό
μας:
Panasonic Marketing Europe GmbH, Panasonic Testing Slovensko
Centre, Winsbergring 15, 22525 Hamburg, Γερμανία Izjava o skladnosti (DoC)
“Panasonic Entertainment & Communication Co., Ltd.” v
SC-HC200
tem dokumentu izjavlja, da je izdelek v skladu z bistvenimi
Τύπο ασύρματης Ζώνη Μέγιστη ισχύς zahtevami in drugimi pomembnimi določbami Direktive
συχνοτήτων (dBm e.i.r.p.) 2014/53/EU.
Bluetooth® 2402 – 2480 MHz 4 dBm
Stranka lahko naloži izvod izvirnega DoC o naših izdelkih
SC-HC200  RE s strežnika DoC:
https://www.ptc.panasonic.eu/compliance-documents
Τύπο ασύρματης Ζώνη Μέγιστη ισχύς
Naslov pooblaščenega predstavnika:
συχνοτήτων (dBm e.i.r.p.)
Panasonic Marketing Europe GmbH, Panasonic Testing
Bluetooth® 2402 – 2480 MHz 7 dBm Centre, Winsbergring 15, 22525 Hamburg, Nemčija

SC-HC200
TQBJ2131

Vrsta brezžiène Največja moč

Frekvenčni pas
povezave (dBm EIRP)
Bluetooth® 2402 – 2480 MHz 4 dBm
14
SC-HC200 
Vrsta brezžiène Največja moč SC-HC200
Frekvenčni pas Juhtmevaba Maksimaalne
povezave (dBm EIRP)
Bluetooth® 2402 – 2480 MHz 7 dBm seadme Sagedusriba võimsus
tüüp (dBm EIRP)
Bluetooth® 2402 – 2480 MHz 4 dBm
Slovensky
Vyhlásenie o zhode (DoC) SC-HC200 
“Panasonic Entertainment & Communication Co., Ltd.” Juhtmevaba Maksimaalne
týmto vyhlasuje, že tento výrobok je v súlade so seadme Sagedusriba võimsus
základnými požiadavkami a ďalšími príslušnými tüüp (dBm EIRP)
ustanoveniami smernice 2014/53/EÚ. Bluetooth® 2402 – 2480 MHz 7 dBm
Zákazníci si môžu stiahnuť kópiu pôvodného DoC na
naše RE výrobky z nášho servera DoC:
https://www.ptc.panasonic.eu/compliance-documents Latviski
Kontakt na splnomocneného zástupcu: Atbilstības deklarācija (DoC)
Panasonic Marketing Europe GmbH, Panasonic Testing Ar šo “Panasonic Entertainment & Communication Co.,
Centre, Winsbergring 15, 22525 Hamburg, Nemecko Ltd.” paziņo, ka šis izstrādājums atbilst pamatprasībām un
pārējiem Direktīvas 2014/53/ES noteikumiem.
SC-HC200
Typ bezdrôtového Frekvenčné Maximálny výkon Pircēji var lejupielādēt oriģinālo DoC kopiju mūsu RE
pripojenia pásmo (dBm e.i.r.p.) izstrādājumos no mūsu DoC servera:
https://www.ptc.panasonic.eu/compliance-documents
Bluetooth® 2402 – 2480 MHz 4 dBm Lūdzam sazināties ar pilnvaroto parstāvi:
Panasonic Marketing Europe GmbH, Panasonic Testing
SC-HC200  Centre, Winsbergring 15, 22525 Hamburg, Vācijā
Typ bezdrôtového Frekvenčné Maximálny výkon
pripojenia pásmo (dBm e.i.r.p.) SC-HC200
Bluetooth® 2402 – 2480 MHz 7 dBm Maksimālā jauda
Bezvadu tips Frekvenču josla
(dBm EIRP)
Norsk Bluetooth® 2402 – 2480 MHz 4 dBm
Samsvarserklæring (DoC)
“Panasonic Entertainment & Communication Co., Ltd.” SC-HC200 
erklærer herved at dette produktet samsvarer med de Maksimālā jauda
Bezvadu tips Frekvenču josla
grunnleggende kravene og andre relevante bestemmelser (dBm EIRP)
i direktivet 2014/53/EU. Bluetooth® 2402 – 2480 MHz 7 dBm
Kundene kan laste ned en kopi av den originale
samsvarserklæringen (DoC) for vårt RE utstyr fra vår DoC
server: Български
https://www.ptc.panasonic.eu/compliance-documents Декларация за съответствие (DoC)
Kontaktinformasjon autorisert representant: С настоящото “Panasonic Entertainment &
Panasonic Marketing Europe GmbH, Panasonic Testing Communication Co., Ltd.” декларира, че този продукт е
Centre, Winsbergring 15, 22525 Hamburg, Tyskland в съответствие с основните изисквания и други
съответни разпоредби на Директива 2014/53/EС.
SC-HC200 Потребителите могат да свалят копие от оригиналните
Maks. effekt DoC към нашите продуктите от типа RE от сървъра, на
Type trådløs Frekvensbånd
(dBm e.i.r.p.) който се съхраняват DoC:
Bluetooth® 2402 – 2480 MHz 4 dBm https://www.ptc.panasonic.eu/compliance-documents
Свържете се с нашия упълномощен представител:
SC-HC200  Panasonic Marketing Europe GmbH, Panasonic Testing
Maks. effekt Centre, Winsbergring 15, 22525 Hamburg, Германия
Type trådløs Frekvensbånd
(dBm e.i.r.p.)
Bluetooth ®
2402 – 2480 MHz 7 dBm SC-HC200
Максимална
Вид безжична
Eesti keel Честотна лента мощност
връзка
Vastavusdeklaratsioon (DoC) (dBm e.i.r.p.)
Käesolevaga kinnitab “Panasonic Entertainment & Bluetooth® 2402 – 2480 MHz 4 dBm
Communication Co., Ltd.”, et see toode vastab direktiivi SC-HC200 
2014/53/EL olulistele nõuetele ja teistele asjakohastele
Максимална
sätetele. Вид безжична
Честотна лента мощност
Kliendid saavad koopia meie RE toodetele kehtiva връзка
(dBm e.i.r.p.)
originaalvastavusdeklaratsiooni koopia alla laadida meie Bluetooth® 2402 – 2480 MHz 7 dBm
DoC-serveristt:
TQBJ2131

https://www.ptc.panasonic.eu/compliance-documents
Võtke ühendust volitatud esindajaga:
Panasonic Marketing Europe GmbH, Panasonic Testing
Centre, Winsbergring 15, 22525 Hamburg, Saksamaa 15
 Român Hrvatski
Declaraţie de Conformitate (DoC) Deklaracija o podobnosti (DoC)
“Panasonic Entertainment & Communication Co., Ltd.” Ovime, “Panasonic Entertainment & Communication Co.,
declară prin prezenta că acest produs este conform cu Ltd.” izjavljuje da ovaj proizvod udovoljava osnovnim
cerinţele esenţiale şi alte prevederi relevante ale zahtjevima i ostalim relevantnim odredbama Direktive
Directivei 2014/53/UE. 2014/53/EU.
Clienţii pot descărca o copie a DoC-ului original al Kupci mogu preuzeti kopiju originalne DoC za naše RE
produselor noastre RE de la adressa noastră DoC din proizvode s našeg DoC poslužitelja:
Internet: https://www.ptc.panasonic.eu/compliance-documents
https://www.ptc.panasonic.eu/compliance-documents Adresa ovlaštenog predstavništva:
Contactaţi Reprezentantul Autorizat: Panasonic Marketing Europe GmbH, Panasonic Testing
Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Njemačka
Centre, Winsbergring 15, 22525 Hamburg, Germania
SC-HC200
SC-HC200 Vrsta bežične Frekvencijski Maksimalna snaga
Interval de Putere maximă mreže pojas (dBm e.i.r.p.)
Tip de wireless
frecvenţă (dBm e.i.r.p.) Bluetooth ® 2402 – 2480 MHz 4 dBm
Bluetooth® 2402 – 2480 MHz 4 dBm
SC-HC200 
SC-HC200  Vrsta bežične Frekvencijski Maksimalna snaga
Interval de Putere maximă mreže pojas (dBm e.i.r.p.)
Tip de wireless
frecvenţă (dBm e.i.r.p.) Bluetooth® 2402 – 2480 MHz 7 dBm
Bluetooth® 2402 – 2480 MHz 7 dBm

Türkçe
Magyar Uygunluk Beyanı (DoC)
Megfelelőségi Nyilatkozat (DoC) “Panasonic Entertainment & Communication Co., Ltd.” bu
Ezennel a, “Panasonic Entertainment & Communication belge ile bu ürünün 2014/53/EU Direkti’nin temel
Co., Ltd.” kijelenti, hogy a jelen termék kielégíti az gerekliliklerine ve diğer ilgili hükümlerine uygun olduğunu
2014/53/EU Irányelv létfontosságú követelményeit és beyan eder.
más vonatkozó rendelkezéseit. Müşterilerimiz RE ürünlerimizle ilgili orijinal DoC
A vásárlók letölthetik az RE termékek eredeti DoC belgesinin bir kopyasını DoC sunucumuzdan indirebilir:
másolatát a DoC szerverünkről: https://www.ptc.panasonic.eu/compliance-documents
https://www.ptc.panasonic.eu/compliance-documents Yetkili Temsilci ile temasa geçin:
A hivatalos képviselő elérhetősége: Panasonic Marketing Europe GmbH, Panasonic Testing
Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Almanya
Centre, Winsbergring 15, 22525 Hamburg, Németország
SC-HC200
SC-HC200 Maksimum güç
Kablosuz türü Frekans bandı
Wireless Maximális teljesítmény (dBm e.i.r.p.)
Frekvenciasáv
típus (dBm e.i.r.p.) Bluetooth® 2402 – 2480 MHz 4 dBm
Bluetooth® 2402 – 2480 MHz 4 dBm
SC-HC200 
SC-HC200  Maksimum güç
Kablosuz türü Frekans bandı
Wireless Maximális teljesítmény (dBm e.i.r.p.)
Frekvenciasáv
típus (dBm e.i.r.p.) Bluetooth® 2402 – 2480 MHz 7 dBm
Bluetooth® 2402 – 2480 MHz 7 dBm
TQBJ2131

16
Disposal of Old Equipment and Batteries
Only for European Union and countries with
recycling systems
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries must not be mixed with general
household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points in
accordance with your national legislation.
By disposing of them correctly, you will help
to save valuable resources and prevent any
potential negative effects on human health
and the environment.
For more information about collection and
recycling, please contact your local
municipality.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.

TQBJ2131

17
█ NORSK Sales and Support Information
For the United Kingdom and Ireland

ADVARSEL! Customer Communications Centre

• For customers within the UK: 0344 844 3899
Produkt • For customers within Ireland: 01 289 8333
• For å redusere faren for brann, elektrisk støt eller • Monday – Friday 9:00am – 5:00pm
skade på apparatet: (Excluding public holidays).
– Dette apparatet må ikke utsettes for regn, fuktighet, • For further support on your product, please visit our
drypp eller sprut. website: www.panasonic.co.uk
– Ikke plasser objekter som er fylt med væske, som
Direct Sales at Panasonic UK
vaser, på apparatet.
• Order accessory and consumable items for your
– Bruk kun anbefalt tilbehør.
product with ease and confidence by phoning our
– Fjern ikke deksler.
Customer Communications Centre
– Dette apparatet må ikke repareres på egen hånd.
Monday – Friday 9:00am – 5:00pm
Overlat servicearbeider til kvalifisert (Excluding public holidays).
servicepersonell. • Or go on line through our Internet Accessory ordering
application at www.pas-europe.com.
• Most major credit and debit cards accepted.
FORSIKTIG! • All enquiries transactions and distribution facilities are
provided directly by Panasonic UK.
Produkt • It couldn’t be simpler!
• For å redusere faren for brann, elektrisk støt eller • Also available through our Internet is direct shopping
skade på apparatet: for a wide range of finished products. Take a browse
– Ikke plasser apparatet i en bokhylle, et innebygget on our website for further details.
kabinett eller et annet lukket sted. Pass på at
apparatet er godt ventilert.
– Apparatets ventilasjonsåpninger må ikke dekkes til
med aviser, duker, gardiner eller lignende.
– Plasser ikke åpen ild, slik som levende lys, oppå
apparatet.
• Dette apparatet er beregnet til bruk under moderate
klimaforhold.
• Dette apparatet anvender en laser. Betjening av
kontroller, justeringer eller andre inngrep enn de som
er beskrevet i denne bruksanvisning, kan føre til farlig
bestråling.
Vekselstrømnett
• Støpselet er frakoblende enhet. Strømuttaket må
befinne seg i nærheten slik at støpselet lett kan kobles
ut fra uttaket umiddelbart.

Manufactured by: Panasonic Entertainment & Communication Co., Ltd.

1-10-12 Yagumo-higashi-machi, Moriguchi City,
Osaka 570-0021, Japan
Importer for UK: Panasonic UK, a branch of
Panasonic Marketing Europe GmbH
Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT
Authorized
Representative in EU: Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany

Panasonic Entertainment & Communication Co., Ltd. En

Web Site: https://www.panasonic.com
TQBJ2131-4
© Panasonic Entertainment & Communication Co., Ltd. 2018-2023 L0218CH5123