Page 110 of 156

3. Technical Specifications
1. Technical Specifications of Operation Table with Neuro Accessories

Multipurpose electro hydraulic with manual and electric override mobile Table with divided leg
section suitable for all major surgical procedures (surgery, OBG, Neuro, Ortho and Endoscopy),
complete with mattress and corded handset.
1. Multifunctional Operating Table dedicated

a. Should have European CE or USFDA certified.

b. Shall comply with IEC standard.

c. Shall have mobile, electro hydraulic, with fully stainless steel (base and column).

d. Should have Headrest, Upper Back plate, Lower Back Plate, Split Leg-plate.

e. Should be Full-length Radiolucent Top.

f. Table should have a narrow base allowing optimum access of C - Arm and greater
stability.

g. Emergency override control - The table must have an independent control system apart
from the remote control handset, so that it should be possible to operate the table even without
the handset unit.

2. Control Elements
a. Should have wired hand control unit.
b. The hand control unit should have Trendelenburg and reverse Trendelenburg, Lateral tilt,
Flexion/Extension, Horizontal Sliding, and height functions. One button auto levelling should
be available.
c. It should have a stable construction with electrically lockable castors via a central foot
pedal / hand control.

d. Should have control panel at Table column for independent adjustment of table functions.

3. Table Top, Base and Column

a. Table top should have 4 or 5 sections.
b. Table base with slim and compact design for ergonomic working and foot position.

c. Should have removable visco-elastic multi-layer component foam with a thickness of

maximum 50mm or more.

d. Chassis and column should be made of stainless steel material.

e. Side rails international standard 30x10mm.

 Page 111 of 156

f. Head plate and leg section must be detachable to offer the possibility of reverse
positioning.

g. Should have 4 Nos. of castor wheels.

4. Technical specification (with acceptance of +/- 5 % tolerance)

a. Table dimension incl. head- and leg plates with side rails 2050 x 530mm or more.

b. Height adjustment without pad 410 mm to 1030mm.

c. Lateral Tilt (L/R): 20/20degree.

d. Trendelenburg/ reverse Trendelenburg by means of electrohydraulic functions: 25/25
degree.

e. Leg plates 2-part. 0- 180 degree

f. Head up/down: 30/90 degree.
g. Back (Up/Down) : 75/45 degree
h. Leg up down: 0/90 degree
i. Flex/Reflex position: 210 /110 degree.
j. Horizontal sliding: 310 mm or more
k. Total load weight capacity of the table 250 kg and above. Should submit testing certificate
for the same.

l. Total dynamic patient weight capacity for all movements of the table up to 180 kg.

m. Longitudinal Sliding: 300 mm or more. (optional)

5. Power and Battery Supply

a. Built-in rechargeable battery operated with integrated battery charger. Charging time
max.8 hours. Min. 50 operations with all movements under load. Audible indicator should be
available in case of low battery.
b. Special-design, maintenance-free rechargeable batteries.

c. Recharging of batteries and supply of operating table by means of a mains cord.

d. Nominal mains voltage (selectable) 220/230-240V AC via mains cord with inbuilt
stabilizer.

6. General Terms
a. The tenderers are required to submit the complete documentary / brochures / manuals with
the table.

b. The table should be US-FDA or European CE certified.

c. Declaration of conformity along with ISO 13485 from notified body for the quoted model.
Should be provided.
 Page 112 of 156

d. For Electrical IEC 60601-1 for medical/electrical equipment for safety, IEC 60601-2-46
for safety of OT tables and IEC 60601-1-2 for Electromagnetic compatibility. Should be
provided.
7. General & Neuro Accessories
a. Body strap in 2 pieces - 1
b. Gel pads: Prone/ Headrest, Spine, Lateral position - 1 No. Each

c. Carbon fibre extension for main OT Table, with headrest and stand (unobstructed imaging
length w/ headrest = 1464mm, w/o headrest = 1200mm, weight capacity 181kg with +/- 5%
tolerance) - 1 unit with trolley and headrest.
d. Arm board - 1 set
e. Arm Support, Perplex(Optional) - 2 Nos.
f. Spine support Frame - 1 set
g. Horse shoe headrest system for adult & paediatric sizes with table attachment. With tong
pulley for cervical traction (optional) - 1 set

h. Sitting headrest - 1 set (Head rest for carrying out procedures in sitting position)

i. Upper arm support with clamp - 1

j. Lateral support with clamps- 1 pair
k. Mobile Accessory trolley on castors - 1
l. Extension segment / back section extender - 01 no.
m. 3 pin skull clamps with Adult & Paediatric reusable pins (2 sets each) with table attachment
n. Accessories for operating in prone - a radiolucent Wilson frame, gel pad for head, chest
& feet - 1 each (optional)

- Cross bar with clamps for sitting position - 1 set

- Side supports with clamps - 1

- Anaesthesia screen with clamps- 1
- Clamp, rotary- 4 pc
- Clamp, circular - 4 pc
o. Silicone Gel pads (One set each) for various patient

- Gel pads as Head ring: open and closed type for both adult and paediatric use separately

- Gel pads for head rest in supine, prone and lateral positions separately for adults and
children

- Gel pads as operating table pad, perineal table pad, sacral protector, arm protectors

- Gel pads for flexed knee in positions for spine surgery

- Gel pads thigh, leg, heel

- Gel pads for different positions
 Page 113 of 156

Note:
1. Universal 3 pin headrest should be supplied with OT table.

2. Spine extensions- Carbon frames must be supplied along with OT table.

3. The prices for below indicated optional items shall be quoted separately and not to be
included in the total price. The price for optional items will not be considered for price
evaluation. However, the Purchaser reserves its rights to procure the optional items at its
discretion.
a) Universal - Cervical extension device, Radiolucent with cervical traction provision

b) Universal - Extension device - Radiolucent.

a) Cervical Device, Radiolucent (Universal)
1. Artifact-Free Imaging (Radiolucency - 360 degree metal free)

2. Universally fits all Surgical Tables with outside rail width 500 mm - 648 mm (Standard
backplate section or leg plate section)

3. Compatible with all types of side rail (US, EU, UK and Japanese / Indian)

4. External stability with optional Telescopic floor support with movement of self-adjustable
floor base. Till right / left movement, Trend / Rev. Trend Movement.

5. Compatible with standard and Radiolucent skull clamps and Horseshoe Headrest from
DORO, mayfield and Sugita.

6. Compatible with intraoperative CT, 'O' arm, 3D C Arm, 2D C arm, Radiography etc.,

7. Adjustable cervical traction bar

8. Standard mattress 50 mm/ 80 mm
9. Product overall dimension 500 mm x 1200 mm (Thereof 900 mm 360 degree radiolucent)

10. Universal Body Strap

11. Universal side rail adaptor for surgical table accessories fixation

12. Storage cart

13. Patient weight capacity in normal orientation 227 kg (when complying with the conditions
that apply to the surgical table)

14. Made of material - carbon fiber / Stainless steel / Aluminum.

b) Universal - Extension device - Radiolucent.

1. Artifact-Free Imaging (Radiolucency - 360 degree metal free)

 Page 114 of 156

2. Universally fits all Surgical Tables with outside rail width 500 mm - 648 mm (Standard
backplate section or leg plate section)
3. External stability with optional Telescopic floor support with movement of self-adjustable
floor base. Till right / left movement, Trend / Rev. Trend Movement.

5. Compatible with intraoperative CT, 'O' arm, 3D C Arm, 2D C arm, Radiography etc.,

6. Standard mattress 50 mm/ 80 mm

7. Product overall dimension 500 mm x 1200 mm (Thereof 1000 mm 360 degree radiolucent)

8. Universal Body Strap

9. Universal side rail adaptor for surgical table accessories fixation

10. Storage cart

11. Arm board slides between the table top and table top pad and is held in place by the weight
of the patient. Consists of base plate and arm support, rotatable 180 degree.

12. Flat prone position cushion with Gel pad

13. Bow prone position cushion with Gel pad
14. Prone headrest gel
15. Patient weight capacity in normal orientation 227 kg (when complying with the conditions
that apply to the surgical table)

16. Made of material - carbon fiber / Stainless steel / Aluminum

17. Procedures - Ortho, Traumatology, Neuro spine, Cardiovascular, Urology, ERCP

Gastroenterology etc.

Note:
1. Bidders shall furnish technical compliance statement for the model quoted, details of
manufacturer including deviations if any. Technical catalogue /data sheet shall also be
furnished in support of technical compliance statement without fail.
2. JICA logo indicated below in durable form should be fixed in each of the equipment
supplied at a place visible to the viewer.