0% found this document useful (0 votes)
62 views2 pages

Enrolador UR20RW-E ZK

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
62 views2 pages

Enrolador UR20RW-E ZK

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

UR20RW-E and UR20RW-F are ultra high frequency, readable and writable card issuer which can read

and write data


for User Area and EPC Area of UHF tags.
The card issuer can read and write the labels and cards which support EPC global UHF Class1 Gen 2 and ISO 18000-
6C standard. Its USB interface adopts the advanced plug and play interface without driver core technology to connect
computer and other equipment.
The card issuer control chip is provided with a watchdog and a voltage detection circuit, and has the advantage of
stable reading performance.

Features
Wiegand 26 output(Default);Wiegand 26-98 (Optional)
USB power supply
With antenna, active card search mode
Data Reception Time: less than 90ms
USB data format output

Specifications
Model UR20RW-E UR20RW-F
Card Supporting UHF Tags ,UHF Cards
Working Frequency 865MHz-868MHZ 902MHz-928Mhz
Reading Distance 0 to 5cm valid distance
Protocol EPC global UHF Class1 Gen 2, ISO 18000-6C
Communication Interface USB analog keyboard output
Supporting, Europe Supporting, American
Support Working
standard UHF reader standard UHF reader
Working Voltage DC 5V (±4%)
Working Current 50 to 300mA
Working Temperature -10°C to +60°C
Storage Temperature -20°C to +60°C
Dimension 107*107*23mm (±2mm)
DEMO Configuration

Via the demo,user can set working frequency and data output format for card issuer, also can write and read data
information of UHF cards.

Notes
Though the demo can read and write EPC Area and User Area data of UHF card, UHF reader just read EPC Area data
and output the card number.
After the DEMO settings are completed, disconnect the demo ,then you need to wait for 1s to use the text or
document to obtain data.
In order to prevent duplication of read card, you should leave the card area about 1s to swipe again.
Reading card successfully once ,the prop tone alarms once and flashing green light.

Opening any text or taking a typewriting window as the current window,the cards number will be displayed in the
window.
When the power is on, the buzzer rings about 400ms,while swiping cards,the buzzer rings about 200ms.
The card issuer outputs the EPC byte .(TID/USER (initial address) implemented later in the upgrade.

ZKTECO CO.,LTD. www.zkteco.com E-mail: sales@zkteco.com Copyright © 2020 ZKTECO CO., LTD. All rights reserved. V1.0 2020.8.5

You might also like