DEPARTMENT OF EDUCATION
REGION VI - WESTERN VISAYAS
DIVISION OF NEGROS OCCIDENTAL
INOCENCIO V. FERRE R MEMORIAL SCHOOL OF FISHERIES
TALISAY CITY, NEGROS OCCIDENTAL
Name:________________________ Grade and Sec.________________ Date:_____________ Parent Sig.:____________________
I. Multiple Choice:
Direction: read and analyze each statement carefully and encircle the letter of the correct answer.
1. Why should shells of snails and other foreign materials be removed before pond leveling?
a. to prevent the pond water from fouling
b. to avoid the workers’ feet from incision or puncture from these shells
c. to prevent may increase in alkalinity of the soil caused by the decomposing shells
d. to avoid water turbidity contributed by the shells
2. Why is it important for a student to wear hat and long-sleeved working clothes in pond draining?
a. to protect his skin from getting dark
b. to protect him from getting dirty from soft mud
c. to protect him from over exposure to heat and sunlight
d. all of the above
3. What is the proper tool to use in digging the soil that has formed mud blocks?
a. Crow bar b. Grub hoe c. Shovel d. Digging blade
4. In cleaning the dikes, what should be worn in order to be safe from snake bites?
a. Long sleeved – working clothes c. Steel-capped foot wear
b. Boots d. Rubber gloves and shoes
5. Which equipment must be used to protect feet from puncture, incision and other injuries while leveling the pond bottom?
a. Boots b. Barrier cream c. Gloves d. Socks
6. Tools and equipment must be cleaned after used in order to -
a. Prevent them from rusting c. Save capital cost
b. Prolong their usefulness d. All of the above.
7. The most practical way of preventing rust on tools and equipment is by –
a. Keeping them in a dry place c. Keeping them in a damp place
b. Keeping them in an open place d. Placing them in the corner
8. Which of the following statements is a preventive maintenance?
a. Leave tools unattended c. Store tools inside the room
b. Wipe tools before using them d. Keep tools in a clean and dry place.
9. Which of the following is a pointer in storing tools, materials, and equipment?
a. Clean tools, materials, and equipment immediately. c. Store them in a clean and dry place.
b. Leave tools unattended. d. Remove dirt attached to them.
10. Tools and equipment are best placed in ______.
a. Health corer b. Comfort room c. dining room d. storeroom
11. Improper disposal of waste can lead to ___.
a. Safe working area c. Destruction of soil a surface water.
b. Healthy environment d. Proper protection of natural resources.
12. All are considered hazardous waste except one.
a. Solid waste b. Ignitable waste c. corrosive waste d. reactive waste.
13. How will you identify hazardous waste?
a. Talk to product suppliers and manufacturers. c. Read product labels.
b. c. Ask for Material’s Safety Data Sheet (MSDS) d. All of the choices
14. Tools unattended may lead to –
a. Accident b. Lost c. rust d. all the above.
15. Farm tools and equipment should always be cared for –
a. Longer use b. Save capital c. rust preventiond. all the above
16. A device used to strike objects, like nails, to fit parts and break objects.
a. hammer b. plier c. wrench d. cutter
17. It is the most popular type of measuring tool that measures 6 to 12 inches long.
a. ruler b. speed square c. folding ruler d. try square
18. It is a curved, hand-held aquaculture tool typically used for harvesting grain crop or cutting grass for hay.
a. shovel b. rake c. sickle d. mattock
19.The most versatile and widely used tool to dig, to scoop or to shovel dirt from one point to another.
a. irrigation shovel b. round point shovel c. garden shovel d. scoop shovel
20. A device for measuring the weight of an object.
a. paper weight b. measuring tools c. weighing scale d. squares
21. Which of the following should not be done in taking care of hand tools?
a. Clean your tools after use c. When rust form on tools, remove it by using a fine abrasive cloth
b. Tools should be kept in toolbox or a tool cabinet d. Store hand tools in a wet, sheltered environment
22. It measures the distance between two symmetrically opposing sides. It’s like a compass with the tips that can be adjusted to
fit across the points to be measured.
a. caliper b. folder ruler c. ruler d. squares.
23. Which is a quality indicator for using screwdrivers?
a. bade metal c. screwdriver tips
b. handle and bar attachment materials d. all of the above
24. The following are the guidelines to avoid hand tool injuries EXCEPT:
a. right tool for the job c. proper storage
b. good condition d. watches your body
25. A tool used in tightening or loosening screws.
a. hammer b. screwdriver c. wrench d. pliers
26. Which of the Following that does not belong to the group?
a. Slotted b. Plumbers special c. Phillips d. Clutch head
27. The traditional „steel‟ rake is actually called a bow rake.
a. Bow rake b. Level head rake c. Scoop shovel d. round point shovel
28. Which of the following hand tool that used for the purpose of measuring dimensions, measuring tools are
imperative for implementing any work with precision
a. Hammer b. Pliers c. Measuring tools d. Screwdriver
29. these are indispensable to woodworkers, carpenters, machinists, tile setters.
a. squares b. Try squares c. Ruler d. Caliper
30. It is used for tightening and loosening clutch head screws and bolts.
a. Philips b. Sotted c. Clutch head d. Nut driver
31. a type of screwdriver that is used for tightening and loosening slotted screws and bolts.
a. Philips b. Sotted c. Clutch head d. Nut driver
32. It is a tool used for turning screws so as to drive them into their place.
a. Screwdriver b. Pliers c. Hammer d. Wrench
33. It is used for nail pulling and general carpentry work.
a. straight claw b. curved claw c. Ball peen d. Hand drilling
34. It is like closed end wrenches but is cylindrical in shape.
a. Combination wrench b. Adjustable wrench c. Socket wrench d. Flare nut wrench
35. A doubleended wrench with one end being like an open-end wrench and the other end like a box-end wrench.
a. Combination wrench b. Adjustable wrench c. Socket wrench d. Flare nut wrench
36. An instrument needed in performing a service
a. Tools b. Materials c. Equipment d. Machine
37. These are devices that facilitate work. They denote small, manually operated devices.
a. Tools b. Materials c. Equipment d. Machine
38. It is used for lighter task and for less muscular persons
a. Garden shovel b. round point shovel c. Scoop Shovel d. Sickle
39. The following are the standard applications in broadcast spraying, EXCEPT
a. constant walking speed c. selecting a nozzle‟s tip
b. uniform pressure d. weight
40. Which is not included in the characteristics of a backpack sprayer?
a. Types of pump b. Pressure Regulation c. Sprayer tank volume d. Unform pressure
41-50 True or False
Direction: Write the word true if the statement is correct and write the word false if otherwise. Write your answer on
the space provided before each number.
______ 41. Clean the tools after using them.
______ 42. Tools should be placed in wet and damp places.
______ 43. Wear bracelet, watches and rings when working in the farm.
______ 44. Dispose toxic materials which can cause injury.
______ 45. Leave the tools and materials anywhere in the farm site.
______ 46. Strictly observe the farm safety measures.
______ 47. use tools that are faulty and damaged.
______ 48. Apply first aid in case of injury caused by defective tools in the area.
______ 49. Always ensure the safe storage of hazardous materials.
______ 50. Use personal protective equipment appropriately.
Prepared By:
Jaypen D. Palomata
Note:
Wala dito si Chito, Wala diito si Kiko, Wala rin dito si Gloc 9, pero
MAGBABAGSAKAN DITO…
