xPON 1GE Safe ONU Introduction_V1.
Introduction
1.1 Product Description
XPON 1GE Safe ONU is support Dual mode(EPON and GPON), It can also be applied to
a wide temperature environment, and also has a powerful firewall function.
xPON 1GE ONU meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home)
broadband speed, SOHO broadband access, video surveillance and other requirements and
design a GPON/EPON Gigabit Ethernet products. The box is based on the mature Gigabit
GPON/EPON technology, highly reliable and easy to maintain, with guaranteed QOS for
different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and
IEEE802.3ah.
Dual mode Detecting Rogue
ONU
Industrial design
Powerful firewall
Figure 1 xPON 1GE ONU
1.2 Product categories
Product model Product specification
V2801S 1 xPON+1GE
Table 1 Product categories
1 Access the world
xPON 1GE Safe ONU Introduction_V1.0
1.3 Application Chart
EPON/GPON OLT
Figure 2 Application Chart
1.3 Technical parameters
Technical item 1GE
1 xPON port(EPON PX20+ and GPON Class B+)
Wavelength:Tx1310nm,Rx 1490nm
SC/UPC connector
PON interface
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
1 x 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M
LAN interface
Full/Half, RJ45 connector
LED 3, For Status of REG、SYS、LINK/ACT
Operating Temperature: -30℃～+70℃
condition Humidity: 10%～90%（non-condensing）
Storing Temperature : -30℃～+70℃
condition Humidity :10%～90%（non-condensing）
Power supply DC 12V/0.5A(option)
Power
≤4W
consumption
Dimension 82mm×82mm×25mm（L×W×H）
Net weight 85g
Table 2 Technical parameters
2 Access the world
xPON 1GE Safe ONU Introduction_V1.0
1.4 Panel lights
LED Mark Color Status Description
On Device is powered on and starting.
system SYS Green Blink Device is running normally.
Off Device is powered off.
Yellow Blink Device is not registered to the PON system.
Optical
REG Green Blink Device is being registered.
signal state
Green On Device is registered to the PON system.
On Port is connected properly .
LINK/A
Interface Green Off Port connection exception or not connected.
CT
Blink Port is sending or/and receiving data.
Table 3 Panel lights on
1.6 Interface description
Port Type Function
Connect PON port with internet by SC/UPC type, single mode optical
PON
fiber cable.
LAN Connect device with ethernet port by RJ-45 cat5 cable.
RST Press down reset button and keep1-5seconds to make the device
restart and recover from the factory default settings.
DC12V Connect with power adapter.
Table 4 Interface description
1.7 Software Key Feature
Software Key Feature
EPON/GPON mode Dual mode , Can access EPON/GPON OLTs.
Software mode Bridging mode and Routing mode.
Abnormal protection Detecting Rogue ONU, Hardware Dying Gasp.
Firewall DDOS, Filtering Based on ACL/MAC/URL.
Layer2 802.1D&802.1ad bridge, 802.1p Cos, 802.1Q VLAN.
Layer3 IPv4/IPv6, DHCP Client/Server , PPPoE, NAT , DMZ ,DDNS.
Multicast IGMP v1/v2/v3 , IGMP snooping.
Security Flow & Storm control, Loop Detection.
O&M WEB/TELNET/OAM/OMCI/TR069.
Table 5 Software Key Feature
3 Access the world
