1 2 3 4 5 6 7 8 9 10 11 12

REVISIONS

CONFIDENTIAL ZONE

C8
REV.

1
DESCRIPTION
Re-inforcements are shortened to give space for
DATE

25/10/2023
APPROVED

Jan Larsen
ladder

R3340
D9 2 roxtec moved 90° away from door 13/11/2023 Jan Larsen
A A
845 3 Part 1403 M10 changed to ø12, 48xM16 threaded 22/11/2023 Jan Larsen
holes added in pos 7

DETAIL B

5
71
G10 4 Dimension changed from 490 to 500 17/12/2023 Jan Larsen

26
300
°

R3
12,86

500
Welds near bolt holes must be flat, see sheet welding,
4 SCALE 1 : 20 5 Lifting points painted yellow 03/04/2024 Jan Larsen

6 Lamination check on parts 0814-1101, 1106 and 1108 03/06/2024 Jan Larsen

500
B5, D6 7 Component numbers changed 10/06/2024 Jan Larsen

1160
B 8 Paint marking of door entrance 15/06/2024 Jan Larsen B

100
SECTION A-A

380
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 4 Corner plate Plate 50 mm 2917x723 S355 J2+N 0814-1101 583

EN10025-2
470 2 2 Body plate 1 Plate 30 2930x1400 S355 J2+N 0814-1102 946
EN10025-2
3 2 Body plate w Plate 30 mm 1400x1015 S355 J2+N 0814-1103 274
window EN10025-2
C
4 4 angled body plate Plate 30 mm 1400x2855 S355 J2+N 0814-1104 935
C

1085 EN10025-2

470
5 8 body plate for leg Plate 30 mm 1400x1479 S355 J2+N 0814-1105 479
flange 1 EN10025-2

A A 6 16 Flange for leg

interface
Plate 100
mm 1480x530 S355 NL
EN10025-3 0814-1106 530

195
2275
7 1 Bottom plate Plate 30 mm 7610x7610 S355 J2+N 0814-1107 13213
965 EN10025-2
1480

8 1 Top flange Plate 100 ø7700 S355 NL 0854-1108 7589

mm EN10025-3
DETAIL C 9 2 Door side plate Plate 30 mm 1400x150 S355 J2+N
EN10025-2 0814-1109 45
D 2900 200 SCALE 1 : 20 S355 J2+N D
10 2 Dor side lock Plate 30 mm 1400x150 EN10025-2 0814-1109-2 45

11 8 Hinge for hatch Plate 10 mm 57,50x65 S355 J2 0814-1110 0.20

5320 7800
EN10025-2
12 4 Door top plate Plate 20 mm 845x150 S355 J2+N 0814-1111 20
EN10025-2
7800 a4 13 2 Door plate Plate 60 mm 1400x1300 S355 J2+N
EN10025-2 0814-1112 493

a4 7 14 2 Body plate with

hole Plate 30 mm 1400x615 S355 J2+N
EN10025-2 0814-1113 201
2
E
DETAIL M 28
15 17 4
7
8
3
15 1 Support flange Plate 50 mm ø8000 S355 NL
EN10025-3 0814-1114 5815
E
16 28 Flange separation Plate 30 mm 520x700 S355 J2+N 0814-1116 85
SCALE 1 : 10 16 web EN10025-2
24 26 S355 J2
150

200

17 56 Holder for Clamp Plate 4 mm 500x241 EN10025-2 0814-1117 4

165 2
13 18 1 Circular tube Plate 20 mm 24110x700 S355 J2N 3.1 Cert 0854-1118 2635
20
19 8 Web for inner leg Plate 30 1400x290 S355 J2+N 0814-1120 95
flange EN10025-2
21 14 Guide interface S355 J2+N
20 4 plate Plate 30 mm 500x630 EN10025-2 0814-1121 72

22 21 4 Support for guide Plate 30 mm 585x400 S355 J2+N 0814-1122 55

plate EN10025-2
F F
22 14 Cheek plate Plate 20 mm ø130/ø60 S355 J2 0814-1123 2
EN10025-2
1 29
23 23 16 Re-inforcement Plate 50 mm 700x600 S690 QL 0814-1124 74
for small EN10025-6
45°

24 2 Tube for Roxtec Tube Ø225*Ø200 90 S355 J2 0814-1202 5.9

36,1 °
32,1

R200 EN10025-2
6 25 4 Lightning Plate 6 mm 74x50 S235JR Vestas 736139 0.14
4°
4

conductor

5 26 2 Cable inlet Se Part BOM 0814-1400 83.97

650
0 Lashing D-ring LC Lashing D Ring 50T D Ring
27 8 25 ton Ring MBL 234 EN 18 D 50T_815 4.62
18 7
G
19 S355 J2
G
28 1 Inner support ring Plate 10 mm ø6900/ø6500 EN10025-2 0854-1151 328
25
7700

S355 J2
2 29 4 Padeye Plate 30 mm 185 x250 EN10025-2 0814-1125 7.49
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:70 DO NOT SCALE DRAWING

4 0 30 ±1 Jan Larsen 15-09-2023

10
DRAWN FIRMA:
DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
EDGES
12 9 11 27 1 5
120 315 ±1 PRINTED JanLarsen 20/06/2024

5 315
1000
1000
4000
±2
±3 DIMENSIONS
WELDING

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
Dimension SHEET 1 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

Machining of tower flanges after welding

All the leg flanges must be machined flat
3
A The top flange must be machined flat

B B

2275
3

C C

B
D D

2
All flanges
C

E E

7800 ±5
2 A,C

F F

G G

Welded construction
A2
FORMAT
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

7800 ±5 From To Tolerance

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:
2 A,B 30 120 ±1
DEBUR AND
BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
Machining SHEET 2 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 3 48xM16 thread holes added 22-11-2023 Jan Larsen

B B

35
0
0
35

00
18
27,73°

18
40
Thread holes M16 in bottom plate

hru
C C

6T
Seal the holes with Grub screws
24xM1 DIN 913 M16x30
35

0 20
0

35 12 Grease the grub screws

35
0
35

1
0

D 3 50 3 50 All holes D

509,7
440

121,6
149,3
2°

3,86°
door door
681,9
131,8

440
Position the holes like this
1951,7 2226,7 relative to the door entrances
681,9
E E

24 Thread Holes are

Rotated around center

F F

G G

Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:25 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
Thread holes SHEET 3 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 5 Lifting points painted yellow 03-04-2024 Jan Larsen

U 8 Paint marking of door 15-06-2024 Jan Larsen

Paint red marking in

center of door way
B Inside and outside on top B
flange

C C
100

100
D D

Paint the 4 lifting points

Yellow

E E

U SECTION U-U

Metalize Leg flanges according to ISO 2063

coating thickness 85 mym
F Clean threads after metalizing F

DETAIL Q
Metalize this surface according to ISO 2063
coating thickness 85 mym SCALE 1 : 10
Clean threads after metalizing

G G

Surface treatment RAL 5002 C4H according to Vestas surface treatment quality specification 900173 Welded construction
A2
FORMAT
Technical purchase specification Surface treatment – Steels & Castings (Manufacturing). From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
Paint SHEET 4 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

a5

40
- 5 Welds near bolt holes must be flat 03-04-2024 Jan Larsen
A A
Near bolt holes
s10 a6
For the legs
The welds must be
s10 O

40
flat

a5
R R

40
40
B B
26
500

a4 O
350

C DETAIL N C

SCALE 1 : 10

200

150
165

a4
L L
D D
6970

s4

70
69
69
a4

70
SECTION J-J
a4

6970
E
E E E

J J a4
a4 SECTION R-R

182,50
F F

35
All welds must be full penetration welds unless
SECTION E-E it is specified othervise

SCALE 1 : 20
G G

To be produced acc. to Vestas Quality Specification DOC-000002028 V07 SCM-QS welded tools requirement,
Welded components. QL-2
Weld quality according to EN ISO 5817:2007 level B Welded construction
A2
FORMAT

EN 1090 EXC 3 and EN ISO 3834-2 From To Tolerance

Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED 20/06/2024
Weld material to be equal or better properties than
JanLarsen
315 1000 ±2 WELDING
parent material DIMENSIONS

SECTION L-L
1000 4000 ±3
Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
Welding Tolerances for angular dimensions acc. to ISO 13920 class B -1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
Tolerances for straightness, flatness and parrallelism acc. to ISO 13920 class F 30 120
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
Welding SHEET 5 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 6 Lammination check 30-04-2024 Jan Larsen

B B

17
29

C C

D D
90

E E

562

50
72
3

F F

550
Check for Lammination
EN 10160 S2-E2

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Corner plate Plate 50 mm 2917x723 S355 J2+N 0814-1101 583

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:10 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1101 SHEET 6 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 2 Hole for roxtec added 13-11-2023 Jan Larsen

2930

B B
1400

0
23

R1
00
C C
200

500
30

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Body plate 1 Plate 30 2930x1400 S355 J2+N 0814-1102 946

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:20 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1102 SHEET 7 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

1400
C C
650

150

500
D D

1015 30

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Body plate w Plate 30 mm 1400x1015 S355 J2+N 0814-1103 274

window EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:10 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1103 SHEET 8 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B
1400

C C

2855 30

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 angled body plate Plate 30 mm 1400x2855 S355 J2+N 0814-1104 935

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:20 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1104 SHEET 9 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

1479

B B
1400

C C

702
D D

30
34
E E

334

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 body plate for leg Plate 30 mm 1400x1479 S355 J2+N 0814-1105 479
flange 1 EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:10 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1105 SHEET 10 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 6 Lamination check 30-04-2024 Jan Larsen

30°

40
20x 65
1

1340
B B

1210
1480

C C

370
D D

240

110

160
E 100 E
400

530

F F

Check for Lammination

EN 10160 S2-E2

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Flange for leg Plate 100 1480x530 S355 NL 0814-1106 530

interface mm EN10025-3
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:10 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1106 SHEET 11 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

7610
C C

D D

850
850 30

E
7610 E

F F

The bottom plate can be made from several plates

The individual plates must be joined with
Full penetration weld

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Bottom plate Plate 30 mm 7610x7610 S355 J2+N 0814-1107 13213

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1107 SHEET 12 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

360/28 ZONE REV. DESCRIPTION DATE APPROVED

A A
- 6 Lamination Check 30-04-2024 Jan Larsen

Component name changed from 0814-1108 to 854-

7 10-06-2024 Jan Larsen
1108
300
28 slots evenly
spaced

4x
R2
0
B B

R37 0
R334
15
C C

00
65

77
00
D D

100
E E

The top flange can be made from several plates

F
The individual plates must be joined with Check for Lammination
F

EN 10160 S2-E2
Full penetration weld

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Top flange Plate 100 ø7700 S355 NL 0854-1108 7589

mm EN10025-3
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
0854-1108 SHEET 13 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

150
CONFIDENTIAL
50
A A

50
R5
B B

C C
1400

D D

E E
R5

F F
250
40

40
G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight
30
100 1 1 Door side plate Plate 30 mm 1400x150 S355 J2+N 0814-1109 45
EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1109 SHEET 14 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

150
CONFIDENTIAL
50
A A

50
R5

13
B B

100

C C
500
1400

D D

E E
580

R5

F F
250
40

40

G 30 G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight
100 S355 J2+N
1 1 Dor side lock Plate 30 mm 1400x150 EN10025-2 0814-1109-2 45
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1109-2 SHEET 15 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

R5
B B
30

13
50

R5

65
C C

R1
5

10
42,50
D D

30

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Hinge for hatch Plate 10 mm 57,50x65 S355 J2 0814-1110 0.20

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:1 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1110 SHEET 16 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B
150

C 845 20 C

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Door top plate Plate 20 mm 845x150 S355 J2+N 0814-1111 20

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1111 SHEET 17 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

4x
R1
00

0
R70
C C
1400

800

0
R70

D D
400

845
60
E 1300 E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Door plate Plate 60 mm 1400x1300 S355 J2+N 0814-1112 493

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:10 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1112 SHEET 18 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 2 Roxtec hole is removed 13-11-2023 Jan Larsen-

B B

1400

C C

D D

615
30

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Body plate with Plate 30 mm 1400x615 S355 J2+N 0814-1113 201

hole EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:10 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1113 SHEET 19 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

535
1450

90
B B

45°

C C
7790

0
690

D D
8000

E E
50

7790
00
81

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight
The Support flange can be made from several plates
1 1 Support flange Plate 50 mm ø8000 S355 NL 0814-1114 5815
EN10025-3
The individual plates must be joined with Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

Full penetration weld 0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1114 SHEET 20 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B
700

C C

D D

520

30
E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Flange separation Plate 30 mm 520x700 S355 J2+N 0814-1116 85

web EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1116 SHEET 21 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
500
A
50 A

200
B B

C C

D D
476

0
11

R1
2x
2x
15

E E

UP 90° R 8

240,70
F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight
20
4x

1 1 Holder for Clamp Plate 4 mm 500x241 S355 J2 0814-1117 4

R2

EN10025-2
0

30 50 Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:2 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
±1 EDGES
500 120
315
315
1000 ±2
PRINTED JanLarsen 20/06/2024

WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1117 SHEET 22 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
Component name changed from 0814-1118 to 0854-
- 7 10-06-2024 Jan Larsen
1118

UP 359.9° R 3830
700

B B

24110

C C

700
7700

D D

20
E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Circular tube Plate 20 mm 24110x700 S355 J2N 3.1 Cert 0854-1118 2635
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
0854-1118 SHEET 23 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

C C
1400

D D

E E

F F

290 30
G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Web for inner leg Plate 30 1400x290 S355 J2+N 0814-1120 95

flange EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1120 SHEET 24 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

R4000
B B

630
C C
440

39
4x

D D
95

0
R2

370
2x

30

500
E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Guide interface Plate 30 mm 500x630 S355 J2+N 0814-1121 72

plate EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1121 SHEET 25 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

C C
585

D D

400

30
E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Support for guide Plate 30 mm 585x400 S355 J2+N 0814-1122 55

plate EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1122 SHEET 26 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

C C

D D

60

20
130
E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Cheek plate Plate 20 mm ø130/ø60 S355 J2 0814-1123 2

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:1 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1123 SHEET 27 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

R4
0
B B

C C

700
R2
50
51,
84°
260

D D
R2
00

50

E E

600

670

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Re-inforcement for Plate 50 mm 700x600 S690 QL 0814-1124 74

small EN10025-6
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1124 SHEET 28 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL

R85
A A

60

B B

185
100
C C
30

85
30
250

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Padeye Plate 30 mm 185 x250 S355 J2 0814-1125 7.49

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:2 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1125 SHEET 29 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

C C

D D

200 ±1
90

225

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Tube for Roxtec Tube Ø225*Ø200 90 S355 J2 0814-1202 5.9

R200 EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:2 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1202 SHEET 30 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

12
a4

8x
3 1
a4

B B

2
M
10

470
120

300
540
600
C C

160

D D

312,50
300
327,50 470
540
600

E E

a4

10
F F

Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 2 Side 1 Plate 15 mm 320x485 S355 J2 0814-1401 18.1

EN10025-2
G G
2 2 Side 2 Plate 15 mm 320x470 S355 J2 0814-1402 17.6
EN10025-2

3 1 Front Plate 15 mm 600x600 S355 J2 0814-1403 12.5

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1400 SHEET 31 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

10
2xM
B B
485

120
C C

320 15

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Side 1 Plate 15 mm 320x485 S355 J2 0814-1401 18.1

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1401 SHEET 32 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

10
2xM
B B

120
470

C C

320
15

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Side 2 Plate 15 mm 320x470 S355 J2 0814-1402 17.6

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1402 SHEET 33 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
REVISIONS

ZONE REV. DESCRIPTION DATE APPROVED

A A
- 3 M10 changed to ø12 18-11-2023 Jan Larsen

8x 12
1

0
R5
4x
B B

C C

500
300
600
540

500

D D

300 15
540

E 600 E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Front Plate 15 mm 600x600 S355 J2 0814-1403 12.5

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:5 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1403 SHEET 34 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

74

25 25

R2
B B

15

50
C C

48 6

D D

E E

F F

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Lightning Plate 6 mm 74x50 S235JR Vestas 736139 0.14

conductor
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:1 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
736139 SHEET 35 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1
 1 2 3 4 5 6 7 8 9 10 11 12

CONFIDENTIAL
A A

B B

C C

69
00
00
65

D D

10

E E

F F

The Support flange can be made from several plates

The individual plates must be joined with
Full penetration weld

G G
Pos. no. Qty Description Profile Dimension Lgd. Material Component Weight

1 1 Inner support ring Plate 10 mm ø6900/ø6500 S355 J2 0854-1151 328

EN10025-2
Welded construction
A2
FORMAT

From To Tolerance
Sags Nr
0854 NAME DATE SCALE:1:50 DO NOT SCALE DRAWING

0 30 ±1 DRAWN Jan Larsen 15-09-2023 FIRMA:

DEBUR AND
30 120 ±1 BREAK SHARP REVISION Jan Larsen 15-06-2024
315 ±1 EDGES
120 PRINTED JanLarsen 20/06/2024
315 1000 ±2 WELDING
1000 4000 ±3 DIMENSIONS

Towerstand Center
UNSPECIFIED UNSPECIFIED ARE IN TITLE:
4000 + ±4 MILLIMETERS FINISH
EDGES ROUNDED HOLE CHAMFERED
OD 7000 to 7600 mm
H Machining
-0,5 -0,5 Tolerance WARNING: PROPRIETY AND CONFIDENTIAL INFORMATION.
From To
-1 -1
0 30 ±0,1 This document and the information set forth herein (the information) are confidential
and propriety to Kraningeniøren A/S, constitute trade secrets and derive
30 120 ±0,15 independent value, actual or potential from not being generally known. In SHEET NAME.
120 400 ±0,2 consideration of you receiving this document you agree to keep the information
secret, and only to use the information for your own needs to accomplish task(s)
1151 SHEET 36 OF 36
400 1000 ±0,3 agreed with Kraningeniøren A/S, and not to disclose any part of the information to DWG NO.

0854-1100 8
any third party and not to make any copies or reproductions therof by whatsoever REVISION
1000 2000 ±0,5
means without written consent from Kraningeniøren A/S.
1 2 3 4 5 6 7 8 2000 + ±1