Structural Repair & Maintenance
Prismix Epoxy Putty
Two- Component Epoxy Putty
Description Method of Application
Prismix Epoxy Putty is composed of epoxy resin, cyclo aliphatic Surface Preparation:
amine type hardener, properly selected inert fillers & additives. It is • In order to achieve maximum adhesion between the substrate,
a multipurpose supplied as a two-pack material which, on mixing, Surface should be sound, dry, clean and free of all loose particles,
cures to a high strength, oil, water, and chemically resistant film. rust, grease, cement laitance, etc.
It is used for sealing of cracks, repairing of concrete & metallic • New concrete floors should be at least 28 days cured.
surfaces, etc. • Laitance can be removed by sand blasting.
• Oil and grease can be removed by using degreaser or by steam
cleaning.
Areas of Application
Mixing:
• Pre-cast elements, curb stone, panels, pipes, wood and metal • Prismix Epoxy Putty is a two-part system. Use a slow speed drill or
profiles & ceramic etc. mixing blades. Use an empty cleaned container for mixing. Mix part
• Watertight repairs and structural sealing of cracks, ‘A’ with slow speed drill and add part ‘B’ and mix thoroughly until
honeycomb and rigid joints. the paste is smooth and lump free.
• Waterproof and abrasion resistant lining for tanks, channels, silos, • It is recommended to mix the total quantity in one time.
sumps, and basements.
Application:
• Apply by trowel or spatula to contact surface and press the parts
Features & Benefits together until cured.
• Cracks and rigid joints can be filled either by toweling or grouting.
• Easy to use by trowel.
• bonds most common building materials
• Strong adhesion to prepared surface Precautions & Limitation
• High compressive, flexural, bond strength makes it suitable for
horizontal, vertical and overhead jobs. • Surface Preparation is very important for proper adhesion.
• Resistance to high impact. • Mixing ratios to be maintained as given as pre-packed and entire
• Resistance to vegetable & mineral oils and diluted alkalis. qty to be mixed at one go.
• Excellent water resistance to permanent immersion
Application of the product should be done according to the procedure
mentioned in this leaflet. Stallion Enterprises FZ LLC / Prism
International LLC will not be held responsible for any claim arising
out of non-performance of the product due to incorrect application
procedure or usage of product for non-recommended purpose. Please
contact Prismix technical team for more details on application of the
product for purpose other than mentioned above or on the surfaces
with special construction additives.
Technical Information
Properties Results
Nature Two Component
Comp A: Light Grey
Appearance & colour
Comp B: Light Grey
Comp A: 100
Solids (%) ASTM D 1010
Comp B: 100
Viscosity at 25ºC, Poise ASTM D 1638:74 Mix (1:1): 1.6
Cure properties (Tropical grade)
Temperature 25ºC 35ºC
Pot life 45 min 25 min
Reaction time 105 min 65 min
Physical & Chemical
Comp A: 0.97 ± 0.01
Density, gm/cc ASTM D 3800:79
Comp B: 1.14 ± 0.01
Solubility in water & solvent after cure Insoluble
Sp. Gravity of the mix 1.72
Sensitivity to moisture Negligible
Application temperature,ºC +5 to 50
Pot life @30ºC, minutes 45
Curing time @30ºC, Hrs 12
Full curing time @ 30ºC, Days 3
Flexural strength, 7days, N/mm2 ASTM C 580 17 ± 2
Compressive strength, 7 days, N/mm2 ASTM C 579 55 ± 3
Tensile strength, 7 days, N/mm2 ASTM C 307 9±1
Bond strength, 7 days, N/mm2 ASTM D 4541:02 3.5 (Failure in concrete) 3.5 ± 0.3
Physiological effect Harmless
Hardness, Shore D ASTM D 2240 80 ± 2
Coverage: 1 kg/m2 per coat, approximately (depending on the surface
and the means of application).
Packaging: 3 kg set
Shelf Life & Storage: Shelf life is 12 months from the date of
manufacturing. Store in a cool & dry place.
Health & Safety Precautions:
• Protective gloves and goggles should be worn.
• During use, avoid inhalation.
• In case of contact with skin, rinse with plenty of clean water then
cleanse with soap and water.
• Treat any contact to the skin or eyes with plenty of fresh water
immediately. Should any of the products be accidentally swallowed,
do not induce vomiting, seek medical assistance immediately.
The above technical data are based on controlled laboratory conditions. However, there may be some variation in yield and coverage depending on the ambient weather and site conditions.
Stallion Enterprises FZ LLC # P.O.Box 31291 Al Jazeera Al Hamra, Ras al Khaimah UAE. Rakia 51 FZ12 11
