HT-J5500W

Wireless Receiver Module (SWA-7000)

User manual

5.1CH Blu-ray™
Home Entertainment System

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at

www.samsung.com/register

This Nanum Gothic Eco font is provided by NAVER.

Safety Information
✎✎ The following also applies to the Wireless Receiver Module (SWA-7000).

This symbol indicates that high voltage

CAUTION
is present inside. It is dangerous to
make any kind of contact with any
RISK OF ELECTRIC SHOCK. DO NOT OPEN
internal part of this product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO This symbol indicates that important
NOT REMOVE THE COVER (OR BACK). THERE ARE NO literature concerning operation and
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO maintenance has been included with
QUALIFIED PERSONNEL. this product.

●● The slots and openings in the cabinet and in the back ●● Never insert anything metallic into the open parts
or bottom are provided for necessary ventilation. To of this apparatus. Doing so may create a danger of
ensure reliable operation of this apparatus, and to electric shock.
protect it from overheating, these slots and openings ●● To avoid electric shock, never touch the inside of this
must never be blocked or covered. apparatus. Only a qualified technician should open
-- Do not place this apparatus in a confined space, this apparatus.
such as a bookcase, or built-in cabinet, unless ●● Make sure to plug the power cord in until it is firmly
proper ventilation is provided. seated. When unplugging the power cord from a wall
-- Do not place this apparatus near or over a radiator outlet, always pull on the power cord's plug. Never
or heat register, or where it is exposed to direct unplug by pulling on the power cord. Do not touch
sunlight. the power cord with wet hands.
-- Do not place vessels (vases etc.) containing water ●● If this apparatus does not operate normally - in
on this apparatus. A water spill can cause a fire or particular, if there are any unusual sounds or smells
electric shock. coming from it - unplug it immediately and contact an
●● Do not expose this apparatus to rain or place it authorized dealer or service center.
near water (near a bathtub, washbowl, kitchen ●● Maintenance of Cabinet.
sink, or laundry tub, in a wet basement, or near a -- Before connecting other components to this
swimming pool, etc.). If this apparatus accidentally product, be sure to turn them off.
gets wet, unplug it and contact an authorized dealer -- If you move your product suddenly from a cold
immediately. place to a warm place, condensation may occur on
●● This apparatus uses batteries. In your community, the operating parts and lens and cause abnormal
there might be environmental regulations that require disc playback. If this occurs, unplug the product,
you to dispose of these batteries properly. Please wait for two hours, and then connect the plug to
contact your local authorities for disposal or recycling the power outlet. Then, insert the disc, and try to
information. play back again.
●● Do not overload wall outlets, extension cords or ●● Be sure to pull the power plug out of the outlet if
adaptors beyond their capacity, since this can result in the product is to remain unused or if you are leaving
fire or electric shock. the house for an extended period of time (especially
●● Route power-supply cords so that they are not likely when children, elderly, or disabled people will be left
to be walked on or pinched by items placed on or alone in the house).
against them. Pay particular attention to cords at the -- Accumulated dust can cause an electric shock, an
plug end, at wall outlets, and the point where they electric leakage, or a fire by causing the power cord
exit from the apparatus. to generate sparks and heat or the insulation to
●● To protect this apparatus from a lightning storm, deteriorate.
or when it is left unattended and unused for long ●● Contact an authorized service center for information
periods of time, unplug it from the wall outlet and if you intend to install your product in a location with
disconnect the antenna or cable system. This will heavy dust, high or low temperatures, high humidity,
prevent damage to the set due to lightning and chemical substances, or where it will operate 24 hours
power line surges. a day such as in an airport, a train station, etc. Failing
●● Before connecting the AC power cord to the DC to do so may lead to serious damage of your product.
adaptor outlet, make sure the voltage designation ●● Use only a properly grounded plug and wall outlet.
of the DC adaptor corresponds to the local electrical -- An improper ground may cause electric shock or
supply. equipment damage. (Class l Equipment only.)

2 - English
●● To turn this apparatus off completely, you must FCC NOTES (for U.S.A)
disconnect it from the wall outlet. Consequently, the
This equipment has been tested and found to comply

Safety Information
wall outlet and power plug must be readily accessible
with the limits for a Class B digital device, pursuant
at all times.
to Part 15 of the FCC rules. These limits are designed
●● Do not allow children to hang on the product. to provide reasonable protection against harmful
●● Store the accessories (battery, etc.) in a location safely interference in a residential installation. This equipment
out of the reach of children. generates, uses and can radiate radio frequency energy
●● Do not install the product in an unstable location such and, if not installed and used in accordance with the
as a shaky self, a slanted floor, or a location exposed instructions, may cause harmful interference to radio
to vibration. or television reception, which can be determined by
●● Do not drop or strike the product. If the product is turning the equipment off and on.
damaged, disconnect the power cord and contact a If interference is present, the user is encouraged to try to
service center. correct the interference by one or more of the following
●● To clean this apparatus, unplug the power cord from measures:
the wall outlet and wipe the product using a soft, ●● Reorienting or relocating the receiving antenna.

dry cloth. Do not use any chemicals such as wax, ●● Increasing the separation between the equipment and

benzene, alcohol, thinners, insecticide, air fresheners, receiver.

lubricants, or detergent. These chemicals can damage ●● Connecting this equipment to an outlet that is on a
the appearance of the product or erase the printing different circuit than the one the receiver is connected
on the product. to.
●● Do not expose this apparatus to dripping or splashing. ●● Consulting the dealer or an experienced radio/TV
Do not put objects filled with liquids, such as vases on technician for help.
the apparatus.
This class B digital product meets all requirements
●● Do not dispose of batteries in a fire. of the Canadian Interference - Causing Equipment
●● Do not plug multiple electric devices into the same Regulations.
wall socket. Overloading a socket can cause it to
overheat, resulting in a fire. CLASS 1 LASER product
●● There is danger of an explosion if you replace the This product is classified as a CLASS 1 LASER product.
batteries used in the remote with the wrong type of Use of controls, adjustments or performance of
battery. Replace only with the same or equivalent procedures other than those specified herein may result
type. in hazardous radiation exposure.
WARNING : Complies with 21CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
●● TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES AND OTHER ITEMS DANGER :
WITH OPEN FLAMES AWAY FROM THIS ●●VISIBLE AND INVISIBLE LASER RADIATION WHEN
PRODUCT AT ALL TIMES. OPEN. AVOID DIRECT EXPOSURE TO BEAM.
●● This product contains chemicals (FDA 21 CFR)
known to the State of California to cause cancer and
reproductive toxicity. CAUTION :
●● CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION
●● To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture. WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC
60825-1)
●● THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER. DO NOT
REPAIR THE PRODUCT YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1

3 - English
Safety Information
Important Safety Instructions 3D Precautions
Read these operating instructions carefully before using IMPORTANT HEALTH AND SAFETY INFORMATION FOR
the unit. Follow all the safety instructions listed below. 3D PICTURES.
Keep these operating instructions handy for future Read and understand the following safety information
reference. before using the 3D function.
●● Some viewers may experience discomfort while
1. Read these instructions.
viewing 3D TV such as dizziness, nausea, and
2. Keep these instructions.
headaches.
3. Heed all warnings. If you experience any such symptom, stop viewing 3D
4. Follow all instructions. TV, remove the 3D Active Glasses, and rest.
●● Watching 3D images for an extended period of time
5. Do not use this apparatus near water.
may cause eye strain. If you feel eye strain, stop
6. Clean only with a dry cloth. viewing 3D TV, remove your 3D Active Glasses, and
7. Do not block any ventilation openings. Install in rest.
accordance with the manufacturer’s instructions. ●● A responsible adult should frequently check on

8. Do not install near any heat sources such as children who are using the 3D function.
radiators, heat registers, stoves, or other apparatus If there are any reports of tired eyes, headaches,
(including AV receivers) that produce heat. dizziness, or nausea, have the child stop viewing 3D
TV and rest.
9. Do not defeat the safety purpose of the polarized
●● Do not use the 3D Active Glasses for other purposes
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding (such as general eyeglasses, sunglasses, protective
type plug has two blades and a third grounding goggles, etc.)
●● Do not use the 3D function or 3D Active Glasses while
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does walking or moving around. Using the 3D function or
not fit into your outlet, consult an electrician for 3D Active Glasses while moving around may cause
replacement of the obsolete outlet. you to bump into objects, trip, and/or fall, and cause
serious injury.
10. Protect the power cord from being walked on
●● If you want to enjoy 3D content, connect a 3D device
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the (3D compliant AV receiver or TV) to the product’s
apparatus. HDMI OUT port using a high-speed HDMI cable. Put
on 3D glasses before playing the 3D content.
11. Only use attachments/accessories specified by the ●● The product outputs 3D signals only through an HDMI
manufacturer.
cable connected to the HDMI OUT port.
12. Use only with the cart, stand, ●● The video resolution in 3D play mode is limited to
tripod, bracket, or table the resolution of the original 3D video. You cannot
specified by the manufacturer, change the resolution to your preference.
or sold with the apparatus. ●● Some functions such as BD Wise, screen size
When a cart is used, use
adjustment, and resolution adjustment may not
caution when moving the
operate properly in 3D play mode.
cart/apparatus combination to
●● You must use a high-speed HDMI cable for proper
avoid injury from tip-over.
output of the 3D signal.
13. Unplug this apparatus during lightning storms or ●● Stay at least three times the width of the screen from
when unused for long periods of time.
the TV when watching 3D images. For example, if
14. Refer all servicing to qualified service personnel. you have a 46 inch screen, stay 138 inches (11.5 feet)
Servicing is required when the apparatus has been from the screen.
damaged in any way, such as when the power- ●● Place the 3D video screen at eye level for the best 3D
supply cord or plug is damaged, liquid has been picture.
spilled or objects have fallen into the apparatus, ●● When the product is connected to some 3D devices,
the apparatus has been exposed to rain or
the 3D effect may not function properly.
moisture, does not operate normally, or has been
●● This product does not convert 2D content into 3D.
dropped.
●● “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of

the Blu-ray Disc Association.

4 - English
Contents
Getting Started Network Services
6 Accessories 35 Using BD-LIVE™
6 Speaker Components 35 Using DLNA
7 Front Panel 35 Apps

Contents
7 Rear Panel 36 Using Opera TV Store
8 Remote Control 37 Screen Mirroring

Connections Appendix
9 Connecting the Speakers 38 Additional Information
12 Connecting to a TV and External Devices 39 Disk and Format Compatibility
13 Connecting to a Network Router 44 Troubleshooting
47 Specifications
Settings
48 Licenses
14 The Initial Settings Procedure
15 The Home Screen at a Glance
15 Accessing the Settings Screen ■■ F igures and illustrations in this User Manual
16 Settings Menu Functions are provided for reference only and may differ
from actual product appearance.
19 Radio Setup
20 Network Setup
23 Wi-Fi Direct
24 Upgrading Software
25 Setting Up DLNA

Playing Content
26 Switching the Source Device
26 Playing Commercial Discs
26 Playing a Disc with User Recorded Content
27 Playing Files on a USB Device
28 Controlling Video Playback
30 Playing a Pre-Recorded Commercial Audio Disc
30 Controlling Music Playback
32 Playing Photo Content
32 Using Bluetooth
34 Using the Special Effects Remote Control
Buttons

5 - English
Getting Started
Check the box for the accessories and speaker components listed or shown below.

Accessories
●● Remote Control (AH59-02533A) ●● User Manual (AH68-02771A)
●● Batteries (AAA size) (4301-000116)

Power Cable (3903-000598) FM Antenna (AH42-00021A)

Speaker Components

L R

Center SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω

ID SET

Wireless Receiver
Front x 2 Surround x 2 Speaker Cable x 6 Subwoofer
Module (SWA-7000)

6 - English
 MIC 1

5V 0.5A
MIC 1 MIC 2

MIC 1 MIC 2

5V 0.5A
MIC 1 MIC 2

5V 0.5A
MIC 1 MIC 2

5V 0.5A
MIC 1 MIC 2

Front Panel

DISPLAY ICONS

FUNCTION STOP PLAY/PAUSE

VOLUME
OPEN/CLOSE POWER

Getting Started
CONTROL

DISPLAY

5V 0.5A

DISC TRAY REMOTE CONTROL SENSOR USB

✎✎ When the product is on, do not let children touch the product's surface. It will be hot.
✎✎ To upgrade the product's software through the USB jack, you must use a USB flash drive.
✎✎ When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the /6
button on the product or the remote. To play the movie, you must select Play Movie or Start in the
disc menu, and then press the v button.
✎✎ If you are using the Internet or are playing content from a USB device on your TV through the home
theater, you cannot select the BD/DVD mode with the FUNCTION button. To select the BD/DVD
mode, exit the Internet or stop the content you are playing on the TV, and then select the BD/DVD
mode.

Rear Panel
AUX IN * FM ANTENNA
COOLING FAN
HDMI OUT

POWER CORD SPEAKER OUTPUT EXTERNAL DIGITAL LAN TERMINAL

CONNECTORS AUDIO IN (OPTICAL)

* Connecting the FM Antenna

1. Connect the supplied FM antenna to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to
a wall or other rigid surface.
✎✎ Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate
ventilation.
Do not obstruct the cooling fan or ventilation holes.
✎✎ This product does not receive AM broadcasts.

7 - English
Getting Started
Remote Control

Tour of the Remote Control

Turn the product on and off. Press to select Home Theater's

mode. (BD/DVD, D. IN, AUX,
FUNCTION
etc.).
VOLUME MUTE
To open and close the disc tray.
Adjust the volume. - +
Cut off the sound temporarily.
Press numeric buttons to
1 2 3
operate options.
4 5 6
7 8 9
DISC MENU TITLE MENU
Press to view the disc menu. Use to enter the Popup
0 POPUP
menu/Title menu.
Press to skip backwards or forwards. Press to search backwards or
Press to play a disc or files. forwards.
Press to pause playing.
Press to stop a disc or files.
SUBTITLE HOME REPEAT

Selects the disc subtitle language. Allows you to repeat a title,

chapter, track or disc.
Press to move to the Home screen.
TOOLS INFO
Use to display the playback
Press to use the Tools menu. information when playing
Select on-screen menu items a Blu-ray/DVD disc or files.
and change menu values.
Return to the previous menu. RETURN EXIT Press to exit the menu.
These buttons are used both for TUNER Use to set a preset radio frequency.
menus on the product and also MEMORY MO/ST
A B C D
several Blu-ray Disc functions. TV SOUND DSP/EQ TUNING Select MONO or STEREO for radio
Press to record FM radio broadcasts. DOWN UP
broadcasts.
Press to direct the audio signal to Search for active FM stations and
the home theater speakers or TV to change channels.
speaker. (See page 34)
Select the desired DSP/EQ audio
mode.

Installing batteries in the Remote Control

✎✎ Make sure to match the "+" and "–" ends of the batteries Battery size: AAA
with the diagram inside the compartment.
✎✎ Assuming typical usage, the batteries last for about one
year.
✎✎ The remote control can be used up to approximately
23 feet from the product in a straight line.

8 - English
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

Place it on a stand or cabinet shelf, or
under the TV stand.
Front (R) Selecting the Listening Position
Subwoofer Center

Connections
The listening position should be
located about 2.5 to 3 times the TV's
Product Surround (R) screen size away from the TV. For
example, if you have a 46 inch screen,
Front (L) locate the listening position 115 to
138 inches (9.6 to 11.5 feet) from the
screen.
Surround (L)
Wireless
Receiver Module

Place these speakers in front of your listening position, facing inwards (about
45°) toward you. Place the front speakers so that their tweeters will be at the
Front Speakers same height as your ear. Align the front face of the front speakers with the
front face of the center speaker or place them slightly in front of the center
speakers.

It is best to install the center speaker at the same height as the front speakers.
Center Speaker
You can also install it directly over or under the TV.

Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Position them about 2 to
Surround Speakers 3 feet above your ear, facing slightly downward.
* Unlike the front and center speakers, the surround speakers are used mainly
for sound effects. Sound will not come from them all the time.

Subwoofer The position of the subwoofer is not so critical. Place it anywhere you like.

* Surround speakers must be connected to the wireless receiver module.

* The appearance of your speakers may differ from the illustrations in this manual.
* Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end.
Match the band on each cable to the speaker label by color, and then connect the cable to the speaker. See
page 10 for exact instructions.

9 - English
Connections
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the colored band on each bundle
to the colored sticker on the bottom or back of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colored
band on each cable to the colors of the speaker jacks. When connecting, make sure to match label color
on the back of speaker.

Center Speaker

Subwoofer
Front Speaker (L)

L R

Surround SURROUND SPEAKERS OUT

SPEAKER IMPEDANCE : 3Ω
Surround Front Speaker (R)
Speaker (L) ID SET

Speaker (R)

Wireless Receiver Module

✎✎ If you place a speaker near your TV set, the screen color may be distorted because of the magnetic
field.
✎✎ Place the wireless receiver module at the rear of the listening position. If the wireless receiver module
is too close to the product, sound from the speakers may be disrupted because of interference.
✎✎ If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other
device near the product, sound from the speakers may be disrupted because of interference.
✎✎ The maximum transmission distance from the product to the wireless receiver module is about 33
feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or
metallic wall is between the product and the wireless receiver module, the system may not operate
at all, because the radio waves cannot penetrate metal.
✎✎ If the product doesn't make a wireless connection, you need to run an ID Set between the product
and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote
control. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back
of the wireless receiver module for 5 seconds, and then turn the product on.

10 - English
| CAUTION |
▶▶ If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully
hang each speaker on a screw or nail.
▶▶ Do not let children play with or near the speakers. They could get hurt if a speaker falls.
▶▶ When connecting the speaker wires to the speakers, make sure that the polarity (+/­–) is correct.
▶▶ 
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands
or alien substances into the duct (hole) of the subwoofer speaker.
▶▶ Do not hang the subwoofer on the wall by the duct (hole).
▶▶  he wireless receiving antenna is built into the wireless receiver module. Keep it away from water
T

Connections
and moisture.
▶▶ For optimal listening performance, make sure that the area around the wireless receiver module
location is clear of any obstructions.
▶▶ In 2-CH mode, you will hear no sound from the wireless surround speakers.

11 - English
Connections
Connecting to a TV and External Devices

R
Red

W
White
Method 1 Method 2

External Devices AUDIO OUT OPTICAL OUT HDMI IN (ARC)

Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with
only this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual
for details.
Connecting to External Devices
Two methods of connecting external devices to your home theater are explained below.

Method 1 AUX IN : Connecting an External Analog Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analog component.  Select the AUX mode.
●● Be sure to match the colors on the cable plugs to the colors on the input and output jacks.

Method 2 OPTICAL : Connecting an External Digital Audio Component

Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.  Select the D. IN mode.
✎✎ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
✎✎ This system supports Digital sampling frequencies of 32 kHz or higher from external digital
components.
✎✎ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not
supported.

Selecting an External Device to Use

To select an external device after you have connected it, press the FUNCTION button. Each time you press the
button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; FM ; BT

12 - English
 Connecting to a Network Router Wireless Network
You can connect your product to your network
router using one of the methods illustrated below.

Wired Network

Wireless IP sharer

Connections
Broadband modem
(with integrated router)
Broadband
service
Or Broadband
service

Router ✎✎ If your wireless IP router supports DHCP, this

product can use a DHCP or static IP address to
connect to the wireless network.

Broadband ✎✎ Set your wireless IP router to Infrastructure

service mode. Ad-hoc mode is not supported.
✎✎ The product supports only the following
Broadband wireless security key protocols:
modem -- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
✎✎ Select a channel on the wireless IP router that
is not currently being used. If the channel set
✎✎ Your router or your Internet Service Provider's
policies may prevent the product from for the wireless IP router is currently being
accessing Samsung's software update server. used by another device nearby, it will result in
If this occurs, contact your Internet Service interference and communication failure.
Provider (ISP) for more information. ✎✎ In compliance with the newest Wi-Fi
certification specifications, Samsung home
✎✎ DSL users, please use a router to make a
network connection. theaters do not support WEP, TKIP, or TKIP-
AES (WPS2 Mixed) security encryption in
✎✎ Try to use the CAT 7 cable to connect. networks running in the 802.11n mode.
✎✎ You cannot use the product if the network ✎✎ Wireless LAN, by its nature, may cause
speed is slower than 10Mbps. interference, depending on the operating
✎✎ To use the DLNA function, you must connect conditions (AP performance, distance,
your PC to your network as shown in the obstacles, interference by other radio devices,
illustrations above. etc.).
The connection can be wired or wireless.

13 - English
Settings
4:3 Pan-Scan - For older, standard screen,
The Initial Settings Procedure
analog TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in Pan-Scan format that fills
●● The Home menu will not appear if you do not the screen, but cuts off the left and right sides
configure the initial settings. of the picture and enlarges the middle vertically.
●● The OSD (On Screen Display) may change in 5. The Network screen appears.
this product after you upgrade the software -- Before you begin, confirm that the product is
version. connected to your router.
●● The access steps may differ depending on the -- Set to wired or wireless depending on your
menu you selected. network environment.
-- If your wireless network has a security code,
1. Turn on your TV after connecting the product, you will need to enter the code to complete
and then turn on the product. When you turn the network connection.
on the product for the first time, the product -- If you have a network with static IP addresses,
automatically displays the Setup Language we suggest you select Skip by pressing the
screen. BLUE (D) button.
2. Press the ▲▼ buttons to select the desired
language, and then press the v button.
✎✎ If you skip network setup here or the setup
does not work correctly, you can set up the
3. Press the v button to start function setup. product's network connection later. (See page
20)
Setup
Setup | Network
TV Aspect and Network will be set.
Each setting may be changed later under "Settings" Select your network type.
Network Type
Wireless

Start Wired

Connect

Network cable connected.

a Previous " Select

a Previous d Skip m Move " Select

4. The TV Aspect Ratio screen appears. Press the

▲▼ buttons to select a TV aspect ratio, and 6. The product verifies the network connection
then press the v button. and then connects to the network. When it is
You have four choices: done, press the v button. The "Initial settings
16:9 Original - For widescreen TVs. Displays completed." screen appears, and then the
widescreen pictures in their original 16:9 format Home screen appears.
and 4:3 pictures (the old, standard format) in
4:3 pillar box format with black bars on the left
✎✎ If you want to display the Setup screen again
and make changes, select the Reset option.
and right. (See page 19)
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format ✎✎ If you use an HDMI cable to connect the
and expands 4:3 pictures to fill the 16:9 screen. product to an Anynet+ (HDMI-CEC)-compliant
4:3 Letter Box - For older, standard screen, Samsung TV and 1.) You have set the Anynet+
analog TVs. Displays 4:3 pictures in full screen (HDMI-CEC) feature to On in both the TV
and 16:9 pictures in letter box format that and the product and 2.) You have set the
retains the 16:9 aspect ratio but puts black bars TV to a language supported by the product,
above and below the picture. the product will select that language as the
preferred language automatically.

14 - English
 The Home Screen at a Glance 7 Change Device

Displays a list of external devices connected to the

1 2 main unit. Switch to the desired device.

PLAY DISC PHOTOS VIDEOS MUSIC 8 Function

Use for switching to an external device, and

for radio and mode switching for a Bluetooth
connection. You can use the remote control’s
FUNCTION button and the main unit’s button
for mode switching.
No Disc
9 Settings

Set various functions to suit your personal

Settings
App 1 App 2 App 3 App 4 Opera TV More Screen Change Function Settings preferences.
Store Mirroring Device

✎✎ To play or view video, photo, or music files

3 45 6 7 8 9 located on your PC, you must connect your
home theater and PC to a home network and
have DLNA software installed on your PC. See
1 PLAY DISC
page 25 and 35.
The disc currently in the tray is displayed.
Press v to start playing the disc. Accessing the Settings Screen
2 PHOTOS/VIDEOS/MUSIC 1. Select Settings on the Home screen, and then
Play photos, videos, or music content from a press v. The Settings screen appears.
Disc, USB, PC, or mobile device.
Settings
3 Apps Picture 3D Settings

Sound TV Aspect Ratio : 16:9 Original

Access various for pay or free-of-charge
Network BD Wise : Off
applications.
System Resolution : Auto
4 Opera TV Store Language Movie Frame (24Fs) : Off

Security HDMI Color Format : Auto

Access the on-line Opera TV Store where you
will find high-quality video streaming, music General HDMI Deep Color : Off

streaming, gaming, and social network apps. Support Progressive Mode : Auto

5 More

A list of useful and popular apps we recommend. 2. To access the menus, sub-menus, and options
on the Settings screen, please refer to the
✎✎ Depending on your country, this menu
function may not be supported. remote control illustration. (See page 16)
✎✎ If you leave the product in the stop mode for
6 Screen Mirroring more than 5 minutes without using it, a screen
Set up the wireless mirroring function between saver appears on your TV. If the product is left
the home theater and a smart phone or tablet. in the screen saver mode for more than 20
minutes, the power automatically turns off.

15 - English
 - +
1 2 3
4 5 6

Settings 7
DISC MENU
8 9
TITLE MENU

0 POPUP

Buttons on the Remote Control Used for Settings Menu Functions

the Settings Menu
SUBTITLE HOME REPEAT Picture
3D Settings
1 TOOLS INFO
Set up the 3D related functions.
3D Blu-ray Playback Mode: Select whether
3 to play a Blu-ray Disc with 3D contents in 3D
Mode. If you move to the Home menu while
EXIT
2 RETURN
4 in 3D mode, the product will switch to 2D
TUNER
MEMORY MO/ST
automatically.
A B C D Screen Size: Enter the size of the TV attached to
TV SOUND DSP/EQ TUNING
HOME Button : Press
DOWNto move
UP to the Home the product. The product will automatically adjust
1 the 3D output to the screen size of the TV.
screen.

RETURN Button : Press to return to the ✎✎ Carefully read the health and safety information
2
previous menu. before viewing 3D content. (See page 4)
TV Aspect Ratio
v (ENTER) / DIRECTION Button :
●● Press ▲▼◀▶ to move the cursor or Lets you adjust the output of the product to the
select an item. screen size of your TV. (See page 38)
3
●● Press the v button to activate the
BD Wise
currently selected item or confirm a
setting. BD Wise is Samsung’s latest inter-connectivity
feature. When you connect a Samsung product
EXIT Button : Press to exit the current and a Samsung TV with BD Wise to each other
4
menu. via HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
Detailed Function Information resolution and frame rate of the Blu-ray/DVD Disc.
Each Settings function, menu item, and individual Resolution
option is explained in detail on-screen. To view an
explanation, use the ▲▼◀▶ buttons to select the Lets you set the output resolution of the HDMI
function, menu item, or option. The explanation will video signal to BD Wise, Auto, 1080p, 1080i,
usually appear on the bottom of the screen. 720p, 480p. The number indicates the number
of lines of video per frame. The i and p indicate
A short description of each Settings function starts
interlaced and progressive scan, respectively. The
on this page. Additional information on some of the
more lines, the higher quality.
functions is also in the Appendix of this manual.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto lets
the product adjust its HDMI output to 24 frames
per second automatically for improved picture
quality if attached to a 24Fs compatible TV.
●● You can enjoy the Movie Frame (24Fs) feature

only on a TV supporting this frame rate.

●● Movie Frame is only available when the product

is in the HDMI 1080p output resolution modes.

16 - English
HDMI Color Format Audio Return Channel
Lets you set the color space format for the HDMI Lets you direct the sound from the TV to the
output to match the capabilities of the connected Home Theater speakers. Requires an HDMI
device (TV, monitor, etc). connection and an Audio Return Channel (ARC)
compatible TV.
HDMI Deep Color
●● If Audio Return Channel is set to on and you are

Lets you set the product to output video from using an HDMI cable to connect the product to
the HDMI OUT jack with Deep Color. Deep Color the TV, digital optical input will not work.
provides more accurate color reproduction with ●● If Audio Return Channel is set to Auto and
greater color depth. you are using an HDMI cable to connect the
Progressive Mode product to the TV, ARC or digital optical input is
selected automatically.
Lets you improve picture quality when viewing
DVDs. Digital Output

Settings
Lets you set the Digital Output to match the
Sound capabilities of the AV receiver you’ve connected to
the product. For more details, please refer to the
Speaker Settings
digital output selection table. (See page 43)
Lets you adjust the following speaker settings and
Dynamic Range Control
turn the speaker test on and off so you can test
the speakers. Lets you apply dynamic range control to Dolby
Level: Lets you adjust the relative loudness of Digital, Dolby Digital Plus, and Dolby TrueHD audio.
each speaker from 6dB to -6dB. For example, Auto: Automatically controls the dynamic range
if you like deep bass, you can increase the of Dolby TrueHD audio, based on information
loudness of the subwoofer by 6dB. in the Dolby TrueHD soundtrack. Also turns
Distance: Lets you adjust the relative distance dynamic range control off for Dolby Digital and
of each speaker from the listening position up Dolby Digital Plus.
to 30 feet. The farther the distance, the louder Off: Leaves the dynamic range uncompressed,
the speaker will be. letting you hear the original sound.
Speaker Test: Lets you run the Speaker Test On: Turns dynamic range control on for all three
function so you can test your adjustments. Setting Dolby formats. Quieter sounds are made louder
Speaker Test to On turns the Speaker Test on. and the volume of loud sounds is reduced.
Setting it to Off turns it off.
Downmixing Mode
Speaker Selection
Lets you select the multi-channel downmix method
Lets you select which speakers you want active, that is compatible with your stereo system. You can
either the TV's speakers or the home theater's choose to have the product downmix to Normal
speakers. Stereo or to Surround Compatible.
Equalizer Mode Audio Sync
Set Equalizer Mode on to use the equalizer. When the product is attached to a digital TV, lets
you adjust the audio delay so that the audio syncs
Equalizer Settings
with the video. You can set the delay between 0
Lets you set the equalizer. and 300 milliseconds.
✎✎ Equalizer Settings only appears when
Equalizer Mode is On.

17 - English
Settings
Network System

Network Settings Setup

Lets you configure the network connection so Lets you re-run the Setup procedure. (See page
you can enjoy various features such as Internet 14)
services or DLNA Wi-Fi functionality, and perform
software upgrades. Quick Start
Network Test You can turn on the power quickly by decreasing
the boot time.
Lets you test the Internet Protocol setup to see if
it is working correctly. ✎✎ If this function is set to On, Standby power
consumption will be increased. (About 12W
Network Status ~ 20W)
Lets you check the current network and Internet status.
Anynet+ (HDMI-CEC)
Wi-Fi Direct
Anynet+ is a convenient function that offers
Lets you connect a Wi-Fi Direct device to the linked operations with other Samsung products
product using a peer-to-peer network, without that have the Anynet+ feature and lets you
the need for a wireless router. control those products with one Samsung TV
Note that if the product is connected to a wireless remote. To operate this function, you must
network, it may be disconnected when you use connect this product to an Anynet+ Samsung TV
Wi-Fi Direct. (See page 23) using an HDMI cable.

✎✎ Text files, such as files with a .TXT or .DOC BD Data Management

extension, will not display when you are using
the Wi-Fi Direct function. Lets you manage the contents you downloaded
through a Blu-ray disc that supports the BD-Live
Screen Mirroring service. You can view information about the USB
The Screen Mirroring function lets you view the device you are using for BD Live data storage
screen of your smart phone or smart device on including the available storage space. You can
the TV you have connected to the home theater also delete BD Live data and change the device.
system. (See page 37)
Language
Device Name
Lets you select the language you prefer for the
Lets you assign an identifying name to the On-Screen Menu, Disc Menu, etc.
product. You use this name to identify the ●● The selected language will only appear if it is
product when you are connecting external Wi-Fi supported on the disc.
devices (smart phones, tablets, etc.) to it.

BD-Live Internet Connection

Lets you allow or prohibit an Internet connection

for the BD-Live service.

18 - English
 Security Radio Setup
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created ●● To listen to the radio, you must connect the
your own PIN. supplied FM antenna.
BD Parental Rating
Operating the Radio with the Remote
Prevents playback of Blu-ray Discs with a rating Control
equal to or above a specific age rating unless you
enter the PIN. 1. Press the FUNCTION button to select FM.

DVD Parental Rating 2. Tune to the desired station.

●● Preset Tuning 1 : Press the 5 button to

Prevents playback of DVDs with a rating above a select PRESET, and then press the TUNING
specific numerical rating unless you enter the PIN. UP, DOWN button to select a preset station.

Settings
Change PIN -- Before you can tune to preset stations, you
must add preset stations to the product's
Changes the 4-digit PIN used to access security memory.
functions. ●● Manual Tuning : Press the 5 button to select

MANUAL, and then press the TUNING UP,

General DOWN button to tune in to a lower or higher
frequency.
Time Zone ●● Automatic Tuning : Press the 5 button to

Lets you specify the time zone that is applicable to select MANUAL, and then press and hold the
your area. TUNING UP, DOWN button for a few seconds
to automatically search the band.

Support Selecting Mono or Stereo

Software Upgrade Press the MO/ST button.
●● Each time you press the button, the sound
For more information about this function, see switches between STEREO and MONO.
page 24. ●● In a poor reception area, select MONO for a clear,

Contact Samsung interference-free broadcast.

Provides contact information for assistance with Presetting Stations

your product. Example : Presetting FM 89.10 into memory.
Terms of Service Agreement 1. Press the FUNCTION button to select FM.
2. Press the TUNING UP, DOWN button to scroll
View the general disclaimer regarding third party
the FM frequencies, and then select <89.10>.
contents and services.
3. Press the TUNER MEMORY button (the yellow
Reset C button at the bottom of the remote).
4. Press the TUNER MEMORY button again
Reverts all settings to their defaults except for the
within about 5 seconds. The station is stored in
network. Requires that you enter your security
memory.
PIN. The default security PIN is 0000.
✎✎ If you press the TUNER MEMORY button
repeatedly without changing the station, the
inputted station may be overwritten.
5. To preset another station, repeat steps 2 to 4.
●● To tune in to a preset station, press the

TUNING UP, DOWN button.

19 - English
Settings
✎✎ To delete all Preset FM stations at once, press Network Setup
the TITLE MENU button for about 5 seconds
in FM Manual mode until DEFAULT PRESET When you connect this product to a network, you
appears on the display. can use network based applications and functions
such as BD-LIVE and upgrade the product's software
Recording FM Radio through the network connection.
You can record your favorite radio broadcast on a
USB storage device. Configuring Your Network Connection
1. Insert a USB device into the USB jack on the To begin configuring your network connection,
front of the product. follow these steps:
2. Press the FUNCTION button to select FM, and 1. In the Home screen, select Settings, and then
then press the TUNING UP, DOWN button to press the v button.
select the station you want to record.
2. Select Network, and then press the v button.
3. Press the RED (A) button to start recording. The
VACUUM TUBE SO 3. Select Network Settings, and then press the v
recording process begins.
D
H-EN UND
HIG

H-EN
D VACUUM TUBE SO button.
●● The recorded time is displayed on the left and
UND
HIG

the recording time still available, based on 4. Go to the instructions for Wired networks
the amount of free space in the USB storage starting below or the instructions for Wireless
device, is displayed on the right. networks on the bottom left of next page.

4. Press the EXIT button to finish your recording. Wired Network

The recording is stopped and saved as an .mp3
file at the same time. To play the recorded file, ĞĞ Wired – Automatic
refer to "Playing Files on a USB Device". After following Steps 1 to 3 above:
✎✎ The recorded file is saved in the Tuner folder 1. In the Network Settings screen, change
which is created automatically. Network Type to Wired. Then, select Connect
✎✎ Only the (OPEN/CLOSE), (POWER), EXIT, and press the v button. The product detects
MUTE, and VOLUME +/-, buttons are operable the wired connection, verifies the network
while FM radio is being recorded. connection, and then connects to the network.
5V 0.5A

✎✎ If you don't press any buttons while recording,

5V 0.5A
2. When it is done, highlight OK, and then press
the screen saver will be enabled. v button.
✎✎ Sound effects, such as DSP, EQ, etc., are not ĞĞ Wired - Manual
recorded during FM radio recording.
If you have a static IP address or the automatic
✎✎ The radio is recorded at a set, default volume procedure does not work, you'll need to set the
even if you change the volume or press the Network Settings values manually.
MUTE button during the recording process.
After following Steps 1 to 3 above:
✎✎ If you remove the USB device or Power Cable 1. In the Network Settings screen, change
during the recording process, the portion of
Network Type to Wired. Then, select Connect
the file which has already been recorded may
and press the v button.
not play back.
The product searches for a network, and then
✎✎ Recording will not start if the remaining free displays the connection failed message.
space in the USB storage device is less than
2MB. ✎✎ If it is possible to connect the home theater
to your network wirelessly, select Change
✎
✎ If the USB device is removed or has insufficient Network at this point, change the Network
space (under 2MB), the appropriate message Type to Wireless, and then go to the
is displayed and the recording stops. instructions for wireless networks on the
bottom left of next page.

20 - English
 ĞĞ Wireless - Automatic
Network Settings
Follow the Steps 1 to 3 in "Configuring Your
Wired network connection failed.
Network Connection". (See page 20)
MAC Address XX:XX:XX:XX:XX:XX
IP Address 0. 0. 0. 0 1. In the Network Settings screen, change
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0 Network Type to Wireless. The product searches
DNS Server 0. 0. 0. 0
for and then displays a list of the available
Unable to connect to the network. Try the following: check if your IP address is set networks.
correctly in IP Settings. Contact your Internet Service Provider for more information.

Network Settings

Change Network IP Settings Retry Close Select your network type.

a Previous d Skip < Move " Select Network Type Wireless

Wireless network
2. Use the ◀▶ buttons to select IP Settings, and

Settings
si-ap
then press the v button. The IP Settings You can connect your BD
Home Theater to the
screen appears. MIC
internet. Please select which
KIMING_VTOWER wireless network to use.
3. Select the IP Setting field, and then set it to
Enter manually. WPS(PBC) Search

4. Select a parameter to enter (IP Address, for

m Move " Select ' Return
example), and then press v. Use the number
keypad on your remote control to enter the
2. Select the desired network, and then press the
numbers for the parameter. You can also enter
v button.
numbers using the ▲▼ buttons. Use the ◀▶
buttons on the remote control to move from 3. On the Security Key screen, enter your
entry field to entry field within a parameter. network's security code or pass phrase.
When done with one parameter, press the v Enter numbers directly using the number
button. buttons on your remote control. Enter letters
by selecting a letter with ▲▼◀▶ buttons, and
5. Press the ▲ or ▼ button to move to another
then pressing v button.
parameter, and then enter the numbers for that
parameter following the instructions in Step 4. 4. When finished, select Done, and then press the
v button. The product verifies the network
6. Repeat Steps 4 and 5 until you have filled in all
connection and then connects to the network.
parameters.
✎✎ You can get the network parameter values ✎✎ You should be able to find the security code or
pass phrase on one of the set up screens you
from your Internet provider.
used to set up your router or modem.
7. When finished entering all the parameter
values, select Return ('), and then press the ĞĞ Wireless - Manual
v button. The home theater verifies the If you have a static IP address or the Automatic
network connection and then connects to the procedure does not work, you'll need to set the
network. Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your
Wireless Network Network Connection". (See page 20)
You can set up a wireless network connection in 1. In the Network Settings screen, change
three ways: Network Type to Wireless. The product searches
-- Wireless Automatic for and then displays a list of the available
-- Wireless Manual networks.
-- WPS(PBC) 2. Scroll through the list, select the desired
Before you configure the wireless network network or Add Network, and then press the
connection, disconnect any wireless network devices v button.
currently connected to the product or, if applicable,
3. If you selected a network in Step 2, go to Step 6.
the product's current wired connection.
If you selected Add Network, go to Step 4.

21 - English
Settings
4. Enter your wireless network or wireless router's ✎✎ You can get the Network parameter values
name. from your Internet provider.
●● Enter numbers directly using the number
11. When finished, select Return ('), and then
buttons on your remote control. press the v button. The Security Key screen
●● Enter letters by selecting a letter with the appears.
▲▼◀▶ buttons, and then pressing the v
12. On the Security Key screen, enter your
button.
network's Security Code or Pass Phrase. Enter
●● To display capital letters (or redisplay lower
numbers directly using the number buttons on
case letters if capital letters are displayed), your remote control. Enter letters by selecting
select , and then press the v button. a letter with the ▲▼◀▶ buttons, and then
To display symbols and punctuation, select
●● pressing the v button.
123#&, and then press the v button. To 13. When finished, select Done at the right of the
redisplay letters, select 123#&, and then press screen, and then press the v button. The
the v button. product verifies the network connection and
When finished, select Done, and then press the then connects to the network.
v button.
14. After the home theater verifies the network,
5. On the Security method screen that appears, select OK, and then press the v button.
use the ▲▼ buttons to select the network's
Security method, and then press the v button. ✎✎ You can also begin the Manual Network setup
On the next screen, enter your network's by going to Settings > Network > Network
security code or pass phrase. Status.
●● Enter numbers directly using the number
ĞĞ WPS(PBC)
buttons on your remote control.
One of the easiest ways to set up the wireless
●● Enter letters by selecting a letter with the
network connection is using the WPS(PBC) function.
▲▼◀▶ buttons, and then pressing the v If your wireless router has a WPS(PBC) button,
button. follow these steps:
When finished, select Done, and then press Follow the Steps 1 to 3 in "Configuring Your
the v button. The product searches for the Network Connection". (See page 20)
network.
1. In the Network Settings screen, change
6. The Network connection fail screen appears. Network Type to Wireless. The product searches
Use ◀▶ buttons to select IP Settings, and then for and then displays a list of the available
press the v button. networks.
7. Select the IP Setting field, and then set it to 2. Scroll the list down, select WPS(PBC), and then
Enter manually.
press the v button.
8. Select a network parameter to enter (IP
3. Press the WPS(PBC) button on your router
Address, for example), and then press v
within two minutes. Your product automatically
button. Use the number keypad on your remote
acquires all the network settings values it
control to enter the numbers for the parameter.
needs and connects to your network after the
You can also enter numbers using the ▲▼
network connection is verified.
buttons. Use the ◀▶ buttons on the remote
control to move from entry field to entry field 4. When it is done, highlight OK, and then press
within a parameter. When done with one value, the v button.
press the v button.
✎✎ For a WPS connection, set your wireless
9. Press the ▲ or ▼ button to move to another router’s security encryption to AES. WEP
parameter, and then enter the numbers for that security encryption does not support a WPS
parameter following the instructions in Step 8. connection.
10. Repeat Steps 8 and 9 until you have filled in all
parameters.

22 - English
 2. When you have completed the procedure, you
Wi-Fi Direct should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
The Wi-Fi Direct function allows you to connect Wi-
requested to connect. Confirm that the device
Fi Direct devices to the product and each other using that is making the request is your device, select
a peer-to-peer network, without a wireless router. Yes in the pop up, and then press the v
button to accept.
✎✎ Some Wi-Fi Direct devices may not support
the DLNA function if connected via Wi-Fi 3. The Connecting pop-up appears, followed by
Direct. If this is the case, change the network the Connected pop-up. You should see the
connection method you used to connect the device listed as connected on the Wi-Fi Direct
device to the home theater. screen, and then press the v button.

✎✎ Wi-Fi Direct transmissions can interfere ●● The PBC and PIN procedures connect devices
with Bluetooth signals. Before you use the
automatically.
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi Direct function on

Settings
any device in which it is currently on. Through the Product Using PBC
1. Turn on the Wi-Fi Direct device and activate its 1. Select the Wi-Fi Direct device you want to
Wi-Fi Direct function. connect to this product, and then press the v
2. In the Home screen, select Settings, and then button.
press the v button. 2. The Connecting pop-up appears, followed by
3. Select Network, and then press the v button. the Connected pop-up. When it closes, you
should see the device listed as connected on
4. Select Wi-Fi Direct, and then press the v the Wi-Fi Direct screen.
button.
The Wi-Fi Direct devices that you can connect Through the Product Using a PIN
to appear.
1. Select the Wi-Fi Direct device you want to
Settings connect to this product, and then press the v
button.
Picture Wi-Fi Direct
2. The PIN pop-up appears.
Device Name : [HTS]J5500W
Sound
Select your Wi-Fi Direct device to connect to. 3. Note the PIN code in the pop-up, and then
Network
enter it into the appropriate field in the Wi-Fi
System
AndroidXXXXXXX Not Connected
Direct device you want to connect.
Refresh
Language
Close 4. The Connecting pop-up appears, followed by
Security the Connected pop-up. When it closes, you
General should see the device listed as connected on
Support the Wi-Fi Direct screen.
✎✎ The current wired or wireless network
connection will be disconnected when you use
5. You have three ways to complete the Wi-Fi the Wi-Fi Direct function.
connection:
●● Through the Wi-Fi device.
✎✎ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
●● Through the product using PBC.
the Wi-Fi Direct function.
●● Through the product using a PIN.

Each is covered below.

Through the Wi-Fi Device

1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.

23 - English
Settings
Upgrading Software By USB
1. Visit www.samsung.com.
The Software Upgrade menu allows you to
upgrade the product’s software for performance 2. Click OWNERS & SUPPORT on the top right
improvements or additional services. of the page, and then select Manuals &
Downloads from the drop down that appears.
●● Never turn the product off or back on manually 3. On the next screen, enter the product's model
during the update process. number into the search field. As you enter
●● The update is complete when the product turns the model number, a drop down will display
off after restarting. Press the POWER button to products that match the model number.
turn on the updated product for your use. 4. Left click your product's model number in the
●● Samsung Electronics takes no legal drop down list.
responsibility for product malfunction 5. On the page that appears, select Downloads.
caused by an unstable Internet connection
6. Find the Upgrade File (USB type) in the
or consumer negligence during a software
Description column. Click the ZIP icon in the
upgrade.
Download File column on the right.
1. In the Home menu, select Settings, and then 7. Click Send in the pop-up that appears. The file
press the v button. downloads to your PC.
2. Select Support, and then press the v button. 8. Unzip the zip archive to your computer. You
3. Select Software Upgrade, and then press the should have a single folder with the same name
v button. as the zip file.
4. Select one of the following methods: 9. Copy the folder to a USB flash drive.
●● By Online 10. Make sure no disc is inserted in the product,
●● By USB and then insert the USB flash drive into the USB
●● Auto Upgrade Notification port of the product.
5. Press the v button. 11. In the product’s menu, go to Settings > Support
Directions for each method begin below. > Software Upgrade.
12. Select By USB.
✎✎ If you want to cancel the upgrade while the
upgrade software is downloading, press the 13. The home theater searches for the software on
v button. the USB drive. When it finds the software, the
Update Request pop-up appears.
By Online 14. Select OK. The home theater turns off, turns
Your product must be connected to the Internet to on, and then begins the upgrade. When the
use the By Online function. Remove all discs before upgrade is done, the home theater turns off.
you begin. 15. Press the POWER button to turn on the home
1. Select By Online, and then press the v button. theater.
The Connecting to Server message appears.
✎✎ There should be no disc in the product when
2. If an update is available, a popup message you upgrade the software using the USB Host
appears asking if you want to upgrade. If you jack.
select Yes, the product turns off automatically,
turns on, and then begins the upgrade. ✎✎ When the software upgrade is done, check
the software details in the Software Upgrade
3. The update progress popup appears. When menu.
the update is completed, the product turns off
automatically again.
4. Press the POWER button to turn on the
product.

24 - English
Auto Upgrade Notification
If your product is connected to the network and you
set Auto Upgrade Notification on, the product will
notify you if a new software version is available with
a pop-up message.
1. Turn on the product.
2. In the Software Upgrade menu, set Auto
Upgrade Notification to On.
If there is a new software version available, the
product will notify you with a pop-up message.
3. To upgrade the firmware, select Yes. The
product turns off automatically, turns on, and
then begins the upgrade.

Settings
4. The update progress popup will appear. When
the update is complete, the product will turn
off automatically again.
5. Press the POWER button to turn on the
product.

Setting Up DLNA
DLNA lets you play music, video, and photo files
stored in your PC through your home theater.
To use DLNA, you must install DLNA software or
already have DLNA software installed on your PC
and connect the home theater to your PC via your
network (See page 13).
✎✎ PCs running Windows 7 and Windows 8 have
DLNA software (Play To) built in.

25 - English
Playing Content
Your home theater can play content located on 3. Press the ^ button to close the disc tray.
Blu-ray/DVD/CD discs, USB devices, PCs, smart Playback starts automatically.
phones, tablets, and in Apps. 4. If playback does not start automatically, press
To play content located on your PC or a mobile the 6 button on the remote.
device, you must connect the PC or mobile device
and the product to your network. To play content on Disc Storage & Management
your PC, you must also download and install DLNA ●● Holding Discs
network software or already have DLNA network
software on your PC. -- Fingerprints or scratches on
a disc may reduce sound and
✎✎ PCs running Windows 7 and Windows 8 have picture quality or cause skipping.
DLNA software (Play To) built in.
-- Avoid touching the surface of a disc where data
has been recorded.
Switching the Source Device -- Hold the disc by the edges so that fingerprints
will not get on the surface.
If two or more external devices are connected to the
-- Do not stick paper or tape on the disc.
main unit, you can use any of the three methods
described below to change the source device.
●● Cleaning Discs
-- If you get fingerprints or dirt on a
Method 1 disc, clean it with a mild detergent
From the Home screen, use the ▲▼◀▶ buttons to diluted in water and wipe with a
move to Change Device, and then press v. soft cloth.
The Change Device popup window will appear. Use -- When cleaning, wipe gently from
the ▲▼ buttons to move to the desired device, and the inside to the outside of the disc.
then press v. -- Disc Storage
`` Do not keep in direct sunlight.
Method 2
`` Keep in a cool ventilated area.
If you move to PHOTOS, VIDEOS, MUSIC or other
`` Keep in a clean protective jacket and store
file-based contents, a list of folders and files will
appear. Press the RED (A) button to display the vertically.
Change Device popup window, use the ▲▼ buttons
to move to the desired device, and then press v. Playing a Disc with User Recorded
Method 3 Content
When a device is connected for the first time, a
You can play multimedia files you have recorded on
popup window appears. In the popup, you can
Blu-ray, DVD, or CD discs.
change the source device by using the ◀▶ buttons,
and then pressing v. 1. Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the
Playing Commercial Discs tray.
2. Use the ▲▼◀▶ buttons to select the type of
1. Press the ^ button to open the disc tray. content you want to view or play - PHOTOS,
2. Place a disc gently into the disc tray with the VIDEOS, or MUSIC - and then press the v
disc’s label facing up. button.
OR
2-1. Select PLAY DISC from the Home screen. The
PLAY DISC screen appears. Use the ▲▼ buttons
to select the desired content type, Photos,
Videos, or Music.

26 - English
3. A screen appears listing the contents of the 3. If necessary, use the ▲▼◀▶ buttons to select
disc. Depending on how the contents are a folder, and then press the v button.
arranged, you will see either folders, individual 4. Select a file to view or play, and then press the
files, or both. v button.
4. If necessary, use the ▲▼◀▶ buttons to select 5. Press the RETURN button to exit a folder or the
a folder, and then press the v button. EXIT button to return to the Home screen.
5. Use the ▲▼◀▶ buttons to select a file to view 6. Go to pages 28~32 for instructions that
or play, and then press the v button. explain how to control playback of videos,
music, and pictures on a USB device.
6. Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return Method 2 : If the product is turned on after
to the Home screen.
Press the EXIT button to return directly to the
you connect a USB device
Home Screen. 1. Turn the product on.
7. Go to pages 28~32 for instructions that 2. Press Change Device and select a USB device.
explain how to control playback of videos, 3. Use the ◀▶ buttons to select PHOTOS,
music, and pictures on a disc. VIDEOS, or MUSIC on the Home screen, and

Playing Content
then press the v button.
Playing Files on a USB Device 4. If necessary, use the ▲▼◀▶ buttons to select
There are two methods you can use to play or view a folder, and then press the v button.
multimedia files located on a USB device through 5. Select a file to view or play, and then press the
your product. v button.
6. Press the RETURN button to exit a folder or the
Method 1 : If you connect a USB device while EXIT button to return to the Home screen.
the product is turned on 7. Go to pages 28~32 for instructions that
explain how to control playback of videos,
1. The "New device connected." pop-up appears. music, and pictures on a USB device.
PLAY DISC PHOTOS VIDEOS MUSIC ✎✎ If you insert a disc while playing a USB device
or phone, the device mode changes to "Disc"
automatically.
New device connected.
STORAGE DEVICE ✎✎ If your cellular phone is DLNA compatible,
Photos
you can play content on the phone without
connecting a USB cable. (See page 35)
Videos
No Disc Music

> Move " Enter ' Return

App 1 App 2 App 3 App 4 Opera TV More Screen Change Function Settings
Store Mirroring Device

✎✎ If the pop-up does not appear, go to Method

2.
2. Use the ▲▼ buttons to select Photos, Videos,
or Music and then press the v button.
Depending on how the contents are arranged,
you will see either folders, individual files, or
both.

27 - English
Playing Content
Controlling Video Playback 2 Using the disc menu, title menu, popup
menu, and title list
You can control the playback of video content
located on a Blu-ray/DVD disc,FUNCTION
USB device, mobile DISC MENU
device, or PC. Depending
VOLUME
on the
MUTE
disc or contents,
some of the functions During playback, press this button to display the
- described
+ in this manual may
Disc menu.
not be available.
1 2 3 TITLE MENU
Buttons on the Remote Control used for
4 5 6
Video Playback During playback, press this button to display the
7 8 9 Title menu.
DISC MENU TITLE MENU
●● If your disc has a playlist, press the GREEN (B)
0 POPUP
button to go to the playlist.
2
1 POPUP MENU

SUBTITLE HOME REPEAT During playback, press this button to display the
Popup menu.
3
TOOLS INFO 3 Repeat Playback

1 Playback related buttons 1. During playback, press the REPEAT button

on the remote control.
The product does not play sound in Search, Slow,
EXIT 2. Press the ▲▼ buttons to select Off, Title,
or Step mode. RETURN
Chapter, All or Repeat A-B, and then press
●● To return to normal speed
TUNER playback, press the
MEMORY MO/ST the v button.
6 button. A B C D
TV SOUND DSP/EQ TUNING
DOWN UP ĞĞ Repeat A-B
6 Starts playback.
1. Press the v button at the point where you
5 Stops playback. want repeat play to start (A).

Pauses playback. 2. Press the v button at the point where you

7
want repeat play to stop (B).
During playback, press the 3 or 3. To return to normal play, press the REPEAT
Fast Motion 4 button. button again.
Each time you press the 3 or 4
Play 4. Press the v button.
button, the playback speed will
change. ✎✎ Depending on the disc, the screen may not
display all repeat options.
In pause mode, press the 4
Slow button. ✎✎ The screen may not display Chapter or
Title immediately. Continue to press the
Motion Play Each time you press the 4 button,
▲▼ buttons until your choice is inside the
the playback speed will change.
applicable field.
In pause mode, press the 7 ✎✎ To return to normal play, press the REPEAT
Step Motion button. button again, press the ▲▼ buttons to
Play Each time you press the 7 button, select Off, and then press the v button.
a new frame appears.
✎✎ The screen may not display Repeat A-B
During playback, press the 1 or immediately. Continue to press the ▲▼
2 button. buttons until Repeat A-B is inside the
Skip Motion applicable field.
Each time you press the 1 or
Play
2 button, the disc moves to the ✎
✎ You must set point (B) at least 5 seconds of
previous or next chapter or file. playing time after point (A).

28 - English
Using the TOOLS Menu Menu selections that appear only when a
During playback, press the TOOLS button. BD/DVD disc plays

Title Chapter

If there is more than one title on a disk or device, Lets you move to a chapter that you want to
lets you move to or select a desired title. watch.
✎✎ When searching DVD title, in stop mode, Audio
enter the TOOLS button and title number
(01,02,...) you want. Lets you set the desired audio language.
Playing Time Subtitle
Lets you go to a specific playback point. Use the Lets you set the desired subtitle language.
numeric buttons to input the playback point.
Angle
Repeat Mode
To view a scene from another angle. The Angle

Playing Content
Lets you repeat a specific title, chapter, or marked option displays the number of angles available to
section. view (1/1, 1/2, 1/3, etc.).
Audio Sync BONUSVIEW Video BONUSVIEW Audio
Lets you adjust the audio delay so that the audio Lets you set the desired Bonusview option.
syncs with the video. You can set the delay from
0 to 300 milliseconds.
Menu selections that appear only while a file
Equalizer Mode plays
Set Equalizer Mode on to use the equalizer.
Full Screen
Equalizer Settings
Lets you set the desired full screen size. You
Lets you set the equalizer. can select Original, Mode1 (larger), and Mode2
(largest).
✎✎ Equalizer Settings only appears when
Equalizer Mode is On. Information
Picture Settings Select to view video file information.
Lets you set the picture mode.
✎✎ Depending on the disc or storage device, the
■■ Mode
Tools menu may differ. All options may not be
-- User : Go to Advanced Settings, and then displayed.
press the v button. Lets you adjust the
Brightness, Contrast, Color, and Sharpness
functions manually.
-- Dynamic : Choose this setting to increase
sharpness.
-- Normal : Choose this setting for most viewing
applications.
-- Movie : This is the best setting for watching
movies.

29 - English
Playing Content
Creating a Video Playlist Buttons on the Remote Control used for FUNCTION

You can create a playlist of video files in nearly the Music Playback VOLUME MUTE

same way you create a playlist of music files. See - +

page 31 for instructions. Select video files instead 1 2 3
of music files.
1 4 5 6
Playing a Pre-Recorded Commercial 7 8 9
DISC MENU TITLE MENU
Audio Disc 0 POPUP

4
1. Insert an Audio CD (CD-DA) or an MP3 Disc
into the disc tray. 2
●● For an Audio CD (CD-DA), the first track will
5
SUBTITLE HOME REPEAT
be played automatically. Tracks on a disc 3 6
are played in the order in which they were
recorded on the disc. TOOLS INFO

●● For an MP3 disc, press the ◀▶ buttons to

Number buttons : During Playlist playback,
select MUSIC, then press the v button. 1 press the desired track number. The
selected track is played.
RETURN EXIT
Playlist 0/16
Tools Skip : During playback, press the 1 or 2
TUNER
TRACK 001 Repeat Mode Track 2 button to move to MEMORY the previous
MO/ST or next
A B C D
Equalizer Mode Off music track.
TV SOUND DSP/EQ TUNING
DOWN UP
Rip
> Move < Adjust ' Return
3 5 button : Stops a track.
TRACK 004 04:02 Fast Play (Audio CD [CD-DA] only) :
TRACK 005 03:43 During playback, press the 3 or 4
00:00/00:00
TRACK 006 03:40
4 button.
Each time you press the 3 or 4 button,
the playback speed will change.
CD " Pause c Select Tools ' Return
5 7 button : Pauses a track.
2. To play a particular track, use the ▲▼ buttons
6 button : Plays the currently selected
on the remote to select the track, and then 6
track.
press the v button.
✎✎ For more information about playing music, see Repeating Tracks
Controlling Music Playback below.
You can set the product to repeat tracks.
Controlling Music Playback 1. During music playback, press the TOOLS
button.
You can control the playback of music content 2. Select Repeat Mode, then use the ◀▶ buttons
located on a DVD, CD, USB, mobile device, or PC. to select Off, Track or One, All or Shuffle, and
Depending on the disc or contents, some of the then press the v button.
functions described in this manual may not be
available.

30 - English
Creating a Music Playlist Ripping
1. If you are playing music from a commercial CD 1. Insert a USB device into the USB jack on the
or DVD, press the 5 or RETURN button. The front of the product.
Music List Screen appears. If you are creating 2. With the Playback screen displayed, use the
a playlist from music on a user created disk or ▲▼ buttons to select a track, and then press
USB device, access the Music list as described the YELLOW (C) button. A check appears to the
on page 26 or 27. left of the track.
2. Press the ▲▼◀▶ buttons to move to a desired 3. Repeat Step 2 to select and check additional
file, and then press the YELLOW (C) button tracks.
to select it. Repeat this procedure to select
additional files. 4. To remove a track from the list, move to the
track, and then press the YELLOW (C) button
3. If you want to select all files, press the TOOLS again. The check on the track is removed.
button, use the ▲▼ buttons to select Select All,
and then press v. If you want to deselect all 5. When done, press the TOOLS button.
files, press the TOOLS button, select Deselect The Tools menu appears.
All, and then press v. 6. Use the ▲▼ buttons to select Rip, and then
press the v button. The Rip screen appears.

Playing Content
MUSIC TRACK 001 1 file selected 1/2 Page
7. Use the ▲▼ buttons to select the device to
TRACK 001 TRACK 002 store the ripped files on, and then press the v
05:57 04:27 button.
TRACK 003 TRACK 004
04:07 03:41 ✎✎ Do not disconnect the device while ripping is
in progress.
TRACK 005 TRACK 006
03:17 03:35 8. If you want to cancel ripping, press the v
TRACK 007 TRACK 008 button, and then select Yes. Select No to
03:47 03:49 continue ripping.
TRACK 009 TRACK 010
9. When ripping is complete, the "Ripping is
03:53 03:45
completed." message appears.
CD a Change Device c Select Tools () Jump Page ' Return
10. Press the v button to go back to the Playback
screen.
4. To remove a file from the Playlist, move to the
file, and then press the YELLOW (C) button. ✎✎ This function is not available for DTS Audio
5. Press the v button to play the selected files. CDs.
The Playlist screen appears. ✎✎ This function may not be supported by some
6. To go to the Music List, press the 5 or RETURN discs.
button. ✎✎ Ripping encodes music in the .mp3 format at
7. To go back to the Playlist, press the v button. 192kbps.

✎✎ You can create a playlist with up to 99 tracks ✎✎ On the Track list screen, you can choose Select
All or Deselect All.
on Audio CDs (CD-DA).
-- Use Select All to select all tracks, and then
✎✎ If you go to the Music List from the Playlist, press the v button. This cancels your
and then return to the Playlist, the Playlist will individual track selections.
start playing again from the beginning. -- Use Deselect All to deselect all selected tracks
at once.

31 - English
Playing Content
Playing Photo Content Using Bluetooth
You can play photo content located on a DVD, USB, You can use a Bluetooth device to enjoy music with
mobile device, or PC. high quality stereo sound, all without wires!

Using the Tools Menu ●● Pairing distance : max. 6.6 feet, Operating
During playback, press the TOOLS button. distance : max. 32.8 feet
●● Actual Bluetooth performance may differ
Start / Stop Slide Show depending on your environment, even if you
use your Bluetooth device within the specified
Select to play/pause the slide show. operating distance.

Slide Show Speed

What is Bluetooth?
Select to adjust the slide show speed.
Bluetooth is a technology that enables Bluetooth-
Background Music compliant devices to interconnect with each other
easily using a short, wireless connection.
Select to listen to music while viewing a slide ●● A Bluetooth device may hum or malfunction:

show. -- When a part of your body is in contact with the

receiving/transmitting system of the Bluetooth
Zoom
device or the Home Theater.
Select to enlarge the current picture. -- When the device is subject to electrical variation
(Enlarge up to 4 times) from obstructions caused by a wall, corner, or
office partitioning.
Rotate -- When the device is exposed to electrical
Select to rotate a picture. (This will rotate the interference from same frequency-band devices
picture either clockwise or counter clockwise.) including medical equipment, microwave ovens,
and wireless LANs.
Information ●● Pair the Home Theater with the Bluetooth device

while the two are close together.

Shows the picture information including the file ●● The further the distance is between the Home
name and size, etc.
Theater and the Bluetooth device, the worse the
quality is.
✎✎ Depending on the disc or storage device, the If the distance exceeds the Bluetooth operational
Tools menu may differ. All options may not be
range, the connection is lost.
displayed.
●● In poor reception-sensitivity areas, the Bluetooth
✎✎ To enable the background music function, the connection may not work properly.
photo file must be in the same storage media ●● The Home Theater has an effective reception
as the music file. However, the sound quality
range of up to 32.8 feet in all directions if
can be affected by the bitrate of the MP3
there are no obstacles. The connection will be
file, the size of the photo, and the encoding
automatically cut off if the device is out of this
method.
range. Even within this range, the sound quality
Creating a Photo Playlist may be degraded by obstacles such as walls or
doors.
You can create a photo playlist in nearly the same ●● This wireless device may cause electrical
way you create a music playlist. See page 31 for
interference. during its operation.
instructions. Select photo files instead of music files.

32 - English
To Connect the Home Theater to a Bluetooth -- If the Bluetooth device is turned off, not in
place, or malfunctions.
Device
Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
Connect ✎✎ For the best operational compatibility between
the home theater and a Bluetooth device or
any other device, such as a Mobile Phone, we
recommend you update the device's OS to the
latest version.

Bluetooth device To Disconnect the Bluetooth Device from the

Home Theater
Before you begin, confirm that the Bluetooth device
supports the Bluetooth compliant stereo headset You can disconnect the Bluetooth device from
function. the Home Theater. For instructions, refer to the
Bluetooth device's manual.

Playing Content
1. Press the FUNCTION button on the remote ●● When the Home Theater is disconnected from the
control to display the BT message.
Bluetooth device, the Home Theater will display
2. Select the Bluetooth menu on the Bluetooth DISCONNECTED on the front display.
device you want to connect. For instructions,
refer to the Bluetooth device's manual. To Disconnect the Home Theater from the
3. Select "[HTS]JXXXXX" from the list. Bluetooth Device
●● When the Home Theater is connected to the
Press the ( ) button on the front panel of the
Bluetooth device, the device name of the Home Theater to switch from BT to another mode or
connected Bluetooth device, followed by the turn off the Home Theater.
name of the home theater, will appear on the
●● Except when you disconnect the Home Theater
front display of the home theater.
by changing functions, the connected Bluetooth
4. Play music on the connected device. device will wait a certain amount of time for
●● You can listen to the music playing on the a response from the Home Theater before
connected Bluetooth device over the Home terminating the connection. (Disconnection time
Theater system. may differ, depending on the Bluetooth device.)
✎✎ The Home Theater only supports Middle ✎✎ In Bluetooth connection mode, the Bluetooth
Quality SBC data (up to 237kbps@48kHz), connection will be lost if the distance between
and does not support High Quality SBC data the Home Theater System and the Bluetooth
(328kbps@44.1kHz). device exceeds 32.8 feet. When the Bluetooth
✎
✎ The AVRCP feature is supported. It's device comes back into effective range or you
functionality will differ, depending on the restart the Bluetooth device, you will have to
specifications of the connected device. pair the device and home theater again to
reconnect.
✎✎ Connect only to a Bluetooth device that
supports the A2DP Profile. ✎✎ In Bluetooth mode, the screen saver will start
if the Bluetooth device stays in the Ready state
✎✎ Only one Bluetooth device can be paired at a for 5 minutes. To reconnect the Bluetooth
time.The search or connection functions may
device, turn off the screen saver, and then
not work properly in the following cases:
connect the device. To turn off the screen
-- If there a strong electric field near or around saver, press any button on the remote control
the home theater.
(the Volume button, a number button, etc.)
-- If several Bluetooth devices are simultaneously
paired with product.

33 - English
Playing Content
Using the Bluetooth Quick Start ĞĞ Use TV SOUND:
When the home theater is turned off, connecting 1) When you want to listen to the TV's audio
your smart device to the product via a Bluetooth through the home theater speakers.
connection can turn the home theater on. 2) When you want to listen to the audio from
a USB device plugged into the TV through
✎✎ The Quick Start function is available when the the home theater speakers.
home theater's power cord is plugged into an
AC wall outlet. ĞĞ TV SOUND ON/OFF support specifications:
✎✎ To use this function, set Settings > System >
Quick Start to On. Anynet+
✎✎ To use this function, the Bluetooth connection (HDMI-CEC) TV Sound ON TV Sound OFF
between the home theater and your smart Setting
device should have been established before.
In other words, the home theater should be HTS Speaker HTS Speaker
found on the list of Bluetooth devices your Output Mute
ON
smart device has already connected to. TV Speaker TV Speaker
1. Connect your smart device to the product Mute Output
via Bluetooth. (For information on Bluetooth
HTS Speaker HTS Speaker
connections, refer to your smart device’s manual.)
Output Mute
2. Once connected, the home theater will turn OFF
itself on automatically in BT mode. TV Speaker TV Speaker
●● Select the desired music to play on your smart
Output Output
device. HTS Speaker HTS Speaker
No Output Mute
Using the Special Effects Remote Operation TV Speaker TV Speaker
Control Buttons Output Output

TV SOUND DSP/EQ TV SOUND DSP/EQ

TV SOUND DSP/EQ

If you have a TV that supports Anynet+ (HDMI- You can adjust the sound with various sound
CEC), the TV SOUND button lets you direct the modes.
TV's audio to the Home Theater Speakers or the TV zz DSPOFF : Select for normal listening.

Speakers. To use this function, follow these steps: zz CINEMA : Produces realistic and powerful

1. Connect an HDMI cable to the TV and home sound for movies.

theater. (See page 12) zz MUSIC : Suitable for all music sources.

2. Set Anynet+ (HDMI-CEC) On in the home zz GAME : Revs up video games with powerful

theater and TV. and realistic sound.

zz M-STEREO (Multi Stereo) : Produces surround
3. Press the TV SOUND button on the remote
control. TV SOUND ON flashes on the display sound from 2 channel input sources.
on the front panel, and then changes to zz POWER BASS : Pumps up the bass sound.

D. IN. zz LOUD : Improves bass sound characteristics

●● When TV SOUND is on, TV audio outputs according to output level.

through the Home Theater speakers. zz NIGHT : Optimizes sound for night time

4. Press the TV SOUND button again to turn TV listening by compressing the dynamic range
SOUND off. and softening the sound.
●● When TV SOUND is off, TV audio outputs zz USER EQ : Provides a user adjustable equalizer

through the speakers of the connected so you can adjust music to your liking.
Anynet+ TV.

34 - English
Network Services
3. On your home theater, select Change Device.
Using BD-LIVE™
4. Use the ▲▼ button to select your PC in the
Device List.
1. Connect the product to your network. 5. Select the kind of file you want to view or play,
(See page 13) PHOTOS, VIDEOS, or MUSIC and then press v.
2. Configure the network settings. 6. Use the ▲▼◀▶ button to select the folder
(See pages 20~22) with the kind of files you selected, and then
Once the product is connected to your network, you press v. The File List is displayed.
can enjoy various movie-related service contents 7. Select the file you want to view or play, and
available on BD-LIVE compliant discs. then press v.
1. Attach a USB memory stick to the USB jack on
the front of the product, and then use BD Data
✎✎ You can create Playlists from files on your PC
in the same way you create playlists from files
Management to check its remaining memory. on USB devices and discs.
The memory device must have at least 1GB
of free space to accommodate the BD-LIVE ✎✎ With a few exceptions, you can control the
services. playback of files on your PC in the same
fashion you control the playback of files on
2. Select Settings on the Home screen, and then USB devices and discs.
press the v button.
3. Select System, and then press the v button.
✎✎ You can also access files on your PC by first
selecting PHOTOS, VIDEOS, or MUSIC on the

Network Services
4. Select BD Data Management, and then press Home screen, and then selecting your PC from
the v button. the device list that appears.
5. Select Change Device, and then press the v
button. Apps
6. Select STORAGE DEVICE, and then press the
Your home theater offers an extensive collection
v button.
of news, movies, weather, and other content you
7. Insert a Blu-ray Disc that supports BD-LIVE. can download directly to and enjoy on your home
8. Select an item from the list of BD-LIVE service theater. First, check the network and make sure the
contents provided by the disc manufacturer. home theater is connected to the Internet. Your
home theater must be connected to the Internet to
✎✎ The way you use BD-LIVE and the provided use the Apps feature.
contents may differ, depending on the disc
manufacturer. The apps offered through the Apps feature work
much like their on-line versions or, if different, are
easy to use.
Using DLNA Some apps require you to create an account before
DLNA lets you access and play files located on your you can use them. Although you can create an
PC through your home theater. account for most of these apps through your home
theater, it is easier and quicker to create an account
Follow the directions in the DLNA user's guide to set
by visiting the app sites on line using a PC, laptop,
up DLNA on your PC and to tag folders and files you
or tablet with Internet access. Note that in some
want to share with the home theater.
cases, you will need to use the home theater and
To access and play files located on your PC after you a PC, laptop, or tablet to establish an account. The
have set up DLNA, follow these steps: main difference between the regular on-line versions
1. Turn on your PC, your TV, and the home and the versions you can access through your home
theater. theater is that with the home theater versions, you
2. Make sure the DLNA Shared server is running use your remote to enter letters and numbers as
on your PC. opposed to a keyboard.

35 - English
Network Services
Using Apps Using Opera TV Store
The first time you access any one of the apps, the
home theater displays two agreements. You must At the Opera TV Store, you will find high-quality
accept both agreements to download and use any Internet video streaming, social network, and music
apps. streaming services.
By default, the home theater displays four popular
apps on the Home screen. You can view more apps
Accessing Opera TV Store
and change the apps the home theater displays on To access Opera TV Store, select the Opera TV Store
the Home screen by selecting the More button. button on the Home screen, and then press the v
To start an app, highlight the app, double click it, button.
and then follow the directions displayed on the To exit the Opera TV Store screen, press the EXIT
screen. button on your remote.

Viewing Additional Apps Navigating in Opera TV Store

1. Select the More button on the Home screen, When the Opera TV Store screen appears, it displays
and then press the v button. The More Apps a bank of assorted apps. Use the ▲▼◀▶ buttons on
screen appears displaying a bank of apps. your remote to move the highlight from app to app.
2. To view additional apps, move the highlight
to the right or left until another group of apps Selecting an App
appears. Move the highlight to the app you want, and then
3. To exit the More Apps screen, select Close or press the v button.
press the RETURN button or EXIT button on In the pop-up that appears, select OPEN to open the
your remote. app immediately or ADD TO MY APPS to add the
app to MY APPS. Press the RETURN button on your
Changing the Apps Displayed on the Home remote to go back to the Opera TV Store screen.
Screen
Selecting Apps by Category
1. Select the More button, and then press the v
To make searching for apps easier, you can view apps
button.
by categories such as New, Popular, All, Games,
2. Select the Edit button on the More Apps screen, Music, etc.
and then press the v button. To select a category, use the ▲ button on your
3. Apps that the home theater displays on the remote to move the highlight to the top of the
Home page are marked with a check. Deselect screen.
apps you want to remove from the Home Then, use the◀▶ buttons to select a category.
screen by highlighting each app, and then
pressing the v button. Using the My Apps Screen
4. Select apps by highlighting each app, and then To access the My Apps screen, highlight MY APPS,
pressing the v button. A check mark appears and then press the v button. The My Apps screen
on each app you select. You can have up to appears displaying all the apps you have saved with
four apps selected at a time. the MY APPS designation.
5. When done, select OK, and then press the v
button. The Home screen re-appears.
✎✎ To exit an application, press the EXIT button
on your remote.
✎✎ To delete the login information for all Apps,
press the 5 button for 5 seconds or more in
Home Screen, No Disc Status.

36 - English
Deleting Apps from MY APPS 4. The TV displays a connecting message (for
example, Connecting to Android_92gb...) and
1. Highlight the MENU button on the top of the then displays the connected message.
My Apps screen, and then press the v button
5. In a few moments, the screen of your device
on your remote.
appears on the TV screen.
2. Select REMOVE APPS in the menu, and then ●● When you are using the Screen Mirroring
press the v button. A red rectangle appears
function, video stuttering or audio dropouts
around one of the apps.
may occur, depending on your environment.
3. Move the rectangle to the app you want to ●● The Home Theater can connect to devices
delete, and then press the v button. that support AllShare Cast. Note that all
4. Repeat this process to delete additional apps. devices that have AllShare Cast may not
5. When finished, select DONE, and then press be fully supported, depending on the
the v button. manufacturer. For further information on
mobile connection support, refer to the
6. Press the RETURN button to go back to the manufacturer’s web site.
Main screen. ●● Bluetooth transmissions can interfere with

the Screen Mirroring signal. Before using

Searching for Apps the Screen Mirroring function, we strongly
1. Select SEARCH at the top of the screen, and recommend that you turn off the Bluetooth
then press the v button. function on your smart phone or smart

Network Services
2. To search quickly for popular items, click one device.
of the popular search tabs at the top of the
screen.
3. To search for an app by name, enter the app
name using the onscreen keyboard. Opera TV
Store will search as you type and display apps
with names that match the letters you enter.
●● To cancel a current search, press the RETURN

button on your remote or select BACK on the

screen, and then press v.

Screen Mirroring
Screen Mirroring lets you display the screen of a
smart phone or other compatible device on the TV
screen using Miracast™ technology. Screen Mirroring
does not require a cable or a wireless router.
1. From the Home screen, use the ◀▶ buttons to
select Screen Mirroring, and then press v.
2. Launch AllShare Cast on your smart phone or
device.
3. On your device, find the name of the home
theater system in the list of available devices,
and then select it.

37 - English
Appendix
Additional Information Digital Output

●● Be sure to select the correct Digital Output or you

Notes will hear no sound or just loud noise.
●● If the HDMI device (AV receiver, TV) is not
Connections compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
HDMI OUT ●● Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
●● Certain HDMI output resolutions may not work, ●● Some Blu-ray Discs do not have BONUSVIEW audio
depending on your TV. and Navigation Sound Effects.
●● You must have an HDMI connection to enjoy ●● This Digital Output setup does not affect the
videos with 3D technology. analog (L/R) audio or HDMI audio output to your
●● A long HDMI cable may cause screen noise. If this TV. It affects the optical and HDMI audio output
occurs, set HDMI Deep Color to Off in the menu. when your product is connected to an AV receiver.
●● If you play MPEG audio soundtracks, the audio
Settings
signal outputs as PCM regardless of your Digital
3D Settings Output selections (PCM or Bitstream).
●● Digital Output can be activated when Speaker
●● For some 3D discs, to stop a movie during 3D Selection is set to TV Speaker.
playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated. BD-Live Internet Connection
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once. The ●● The Internet connection may be restricted while
Blu-ray menu appears. Press the 5 button again, you are using BD-LIVE contents.
then select 3D Settings in the Blu-ray menu.
Anynet+ (HDMI-CEC)
●● Depending on the content and the position of the
picture on your TV screen, you may see vertical ●● Depending on your TV, certain HDMI output
black bars on the left side, right side, or both sides. resolutions may not work. Please refer to the user
manual of your TV.
TV Aspect Ratio ●● This function is not available if the HDMI cable
●● Depending on the disc type, some aspect ratios does not support CEC.
may not be available. ●● If your Samsung TV has an Anynet+ logo, then it
●● If you select an aspect ratio and option which is supports the Anynet+ function.
different than the aspect ratio of your TV screen,
BD Data Management
the picture might appear to be distorted.
●● If you select 16:9 Original, your TV may display 4:3 ●● In the external memory mode, disc playback may
Pillarbox (black bars on the sides of the picture). be stopped if you disconnect the USB device in the
middle of playback.
BD Wise (Samsung Products only) ●● Only those USB devices formatted in the FAT file
●● When BD Wise is on, the Resolution setting system (DOS 8.3 volume label) are supported.
automatically defaults to BD Wise and BD Wise We recommend you use USB devices that support
appears in the Resolution menu. the USB 2.0 protocol with 4 MB/sec or faster
read/write speeds.
●● If the product is connected to a device that does
not support BD Wise, you cannot use the BD Wise
●● The Resume Play function may not work after you
function. format the storage device.
●● For proper operation of BD Wise, set the BD Wise
●● The total memory available to BD Data
option in both the product and the TV to On. Management may differ, depending on conditions.

Speaker Settings

●● When Speaker Selection is set to TV Speaker, audio

is produced by the TV speakers.

38 - English
HDMI audio Playing Content

●● When HDMI audio is output to the TV speakers, it Using the TOOLS button while playing pictures
is automatically down-mixed to 2 channels.
●● If the home theater is connected to a BD Wise
Audio Return Channel compliant TV that has BD Wise On, the Picture
Settings menu will not appear.
●● When Anynet+ (HDMI-CEC) is Off, the Audio ●● The Background Music function will not work
Return Channel function is not available. unless the music file and the photo file are located
●● Using an HDMI cable not certified for ARC (Audio on the same storage media. Also, sound quality
Return Channel) may cause a compatibility can be impacted by the bitrate of the MP3 music
problem. file, the size of the photos, and the encoding
●● The ARC function is only available if an ARC- method.
compliant TV is connected.

Playback Disk and Format Compatibility

Playing Video files

●● Video files with high bitrates of 20Mbps or more

Disc types and content your Product can
strain the product’s capabilities and may stop Play
playing during playback.
Media Disc Type Details
Selecting the Audio Language

●● The ◀▶ indicator will not appear on the screen Blu-ray Disc BD-ROM or BD-RE/-R disc
recorded in the BD-RE
if the BONUSVIEW section does not contain any

Appendix
3D Blu-ray Disc format.
BONUSVIEW audio settings.
●● The languages available through the Audio DVD-VIDEO, recorded
Language function depend on the languages that VIDEO DVD-VIDEO, DVD+RW/DVD-RW(V)/
are encoded on the disc. This function or certain DVD-RW, DVD-R/+R discs that
languages may not be available. DVD-R, have been recorded and
●● Some Blu-ray Discs may allow you to select either DVD+RW, finalized, or a USB storage
the PCM or Dolby Digital audio English soundtrack. DVD+R media containing MKV,
MP4 contents.
Selecting the Subtitle Language
Music recorded on CD-
●● Depending on the Blu-ray Disc / DVD, you may be CD-RW/-R, RW/-R, DVD-RW/-R, BD-
able to change the subtitle language in the Disc MUSIC DVD-RW/-R, RE/-R discs or a USB
Menu. Press the DISC MENU button. BD-RE/-R storage media containing
●● This function depends on the selection of subtitles MP3 or WMA contents.
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs. Photos recorded on CD-
●● Information about the main feature BONUSVIEW CD-RW/-R, RW/-R, DVD-RW/-R, BD-
mode will also appear if the Blu-ray Disc has a PHOTO DVD-RW/-R, RE/-R discs or a USB
BONUSVIEW section. BD-RE/-R storage media containing
JPEG contents.
●● This function changes both the primary and
secondary subtitles at the same time.
●● The total number of primary and secondary
✎✎ The product may not play certain CD-RW/-R and
DVD-R because of the disc type or recording
subtitles, respectively, is displayed. conditions.
Playing JPEG files ✎✎ If a DVD-RW/-R disc has not been recorded
properly in DVD video format, it will not be
●● You can’t enlarge the subtitle and PG graphics in playable.
the full screen mode.

39 - English
Appendix
✎✎ Your product will not play content that has been Logos of Discs the Product can Play
recorded on a DVD-R at a bitrate that exceeds 10
Mbps.
✎✎ Your product will not play content that has been
recorded on a BD-R or USB device at a bitrate that
exceeds 30 Mbps.
✎✎ Playback may not work for some types of discs, or Blu-ray Disc 3D Blu-ray Disc
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
✎✎ When you play a BD-J title, loading may take longer
than a normal title or some functions may perform
slowly. BD-LIVE Dolby

Disc Types your Product cannot Play

●● HD DVD ●● DVD-RAM
●● DVD-ROM/PD/MV-Disc, ●● Super Audio CD
etc (except CD layer) DTS Java
●● DVD-RW(VR mode) ●● 3.9 GB DVD-R Disc for
●● CVD/CD-ROM/CDV/CD- Authoring.
G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
NTSC broadcast system in
✎✎ This product may not respond to all operating U.S.A, Canada, Korea, Japan
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the
Region Code
product. Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
✎✎ Samsung cannot guarantee that this product do not match, the disc will not play.
will play every disc bearing the Blu-ray Disc,
The Region Number for this product is displayed on the
DVD, or CD logo because disc formats evolve,
rear panel of the product.
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs. Region
Disc Type Area
Code
✎✎ Please contact the SAMSUNG Customer Care
Center at 1-800-726-7864 if you have questions
North America, Central

a
or encounter difficulty when playing Blu-ray Discs,
DVD, or CD discs in this product. Also, refer to the America, South America, Korea,
rest of this user manual for additional information Japan, Taiwan, Hong Kong and
on playback restrictions. South East Asia.

✎
✎ Some commercial discs and DVD discs purchased
b
Blu-ray Europe, Greenland, French
outside your region may not play on this product.
Disc territories, Middle East, Africa,
Australia and New Zealand.

c
India, China, Russia, Central
and South Asia.

40 - English
 ✎✎ AVCHD format discs need to be finalized.
1 The U.S., U.S. territories and
Canada
✎✎ "x.v.Color" offers a wider color range than normal
DVD camcorder discs.
✎✎ Some MKV and MP4 format discs may not play,
depending on their video resolution and frame
2 Europe, Japan, the Middle East,
Egypt, Africa, Greenland rate.

Supported Formats
3 Taiwan, Korea, the Philippines,
Indonesia, Hong Kong Notes on the USB connection
DVD- ●● Your product supports USB storage media, MP3
VIDEO Mexico, South America, players, digital cameras, and USB card readers.

4 Central America, Australia,

New Zealand, Pacific Islands,
●● The product does not support folder or file names
longer than 128 characters.
Caribbean ●● Some USB/digital camera devices may not be
compatible with the product.

5 Russia, Eastern Europe, India,

North Korea, Mongolia
●● Your product supports the FAT 16, FAT 32, and NTFS
file systems.
●● Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
6 China
●●
compatibility problems.
Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
✎✎ If the Region number of a Blu-ray Disc/DVD

Appendix
does not correspond to the Region number of ●● The product does not support the PTP (Peer to Peer)
this product, the product cannot play the disc. protocol.
●● Do not disconnect a USB device while it is transferring
AVCHD (Advanced Video Codec High or recording data.
Definition) ●● The bigger the image resolution, the longer the image
takes to display.
●● This product can play back AVCHD format discs. These
●● This product cannot play MP3 files with DRM (Digital
discs are normally recorded and used in camcorders.
Rights Management) downloaded from commercial
●● The AVCHD format is a high definition digital video sites.
camera format.
●● Your product only supports video that is under 30fps
●● The MPEG-4 AVC/H.264 format compresses images (frames per second).
with greater efficiency than the conventional image
●● Your product only supports USB Mass Storage Class
compressing format.
(MSC) devices such as thumb drives and USB HDD.
●● Some AVCHD discs use the "x.v.Color" format. This (HUB is not supported.)
product can play back AVCHD discs that use the
●● Certain USB HDD Devices, multi-card readers and
"x.v.Color" format.
thumb drives may not be compatible with this
●● "x.v.Color" is a trademark of Sony Corporation. product.
●● "AVCHD" and the AVCHD logo are trademarks of ●● If some USB devices require excessive power, they may
Matsushita Electronic Industrial Co., Ltd. and Sony be limited by the circuit safety device.
Corporation.
●● If playback from a USB HDD is unstable, provide
✎✎ Some AVCHD format discs may not play, additional power by plugging the HDD into a wall
depending on the recording conditions. socket. If the problem continues, contact the USB
HDD manufacturer.
●● SAMSUNG is not responsible for any data file damage
or data loss.

41 - English
Appendix
Video File Support

File Extension Container Video Codec Audio Codec Resolution

MP4v3 MP3, Dolby Digital, DTS,

*.avi AVI
H.264 BP/MP/HP WMA, PCM
VC-1 AP
*.mkv MKV MP3, Dolby Digital, DTS
H.264 BP/MP/HP

WMV VC-1 AP
*.wmv WMA
(wmv9) VC-1 SM 1920x1080
MP4 (mp4v)
*.mp4 MP4 AAC
H.264 BP/MP/HP
MPEG1
*.mpg / MP1, 2
PS MPEG2
*.mpeg Dolby Digital, DTS
H.264 BP/MP/HP

`` Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not play if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
-- Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
`` Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
`` Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps

Music File Support

File Extension Container Audio Codec Support Range

*.mp3 MP3 MP3 -
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
*.wma WMA WMA
* Bitrates - All bitrates from 5kbps to 384kbps

Picture File Support

File Extension Type Resolution

*.jpg / *.jpeg / *.jpe JPEG
15360x8640
*.png PNG

42 - English
Digital Output Selections

Bitstream
Bitstream Bitstream
Setup PCM (Re-encoded
(Unprocessed) (Re-encoded DTS)
Dolby D)

Connection HDMI supported AV receiver

PCM Up to PCM 7.1ch PCM

Dolby Digital Up to PCM 5.1ch Dolby Digital

Dolby Digital
Up to PCM 5.1ch Dolby Digital Plus
Plus

Audio Dolby TrueHD Up to PCM 5.1ch Dolby TrueHD

Re-encoded
Stream on DTS re-encoded
DTS Up to PCM 5.1ch DTS Dolby Digital *
Blu-ray Disc
DTS-HD High
DTS-HD High
Resolution Up to PCM 5.1ch
Resolution Audio
Audio

DTS-HD Master DTS-HD Master

Up to PCM 5.1ch
Audio Audio

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Appendix
Audio
Stream on Dolby Digital Up to PCM 5.1ch Dolby Digital Dolby Digital Dolby Digital
DVD
DTS Up to PCM 5.1ch DTS DTS DTS

Decodes the
main feature
Outputs only the Decodes the main audio and
main feature audio feature audio and BONUSVIEW
Decodes the main
stream so that your BONUSVIEW audio audio stream
feature audio and
AV receiver can stream together together into
Definition BONUSVIEW audio
decode the audio into PCM audio and PCM audio and
for Blu-ray Any stream together
bitstream. adds Navigation adds Navigation
Disc into PCM audio and
You will not hear Sound Effects, then Sound Effects,
adds Navigation
BONUSVIEW audio re-encodes the then re-encodes
Sound Effects.
or Navigation PCM audio into DTS the PCM audio
Sound Effects. bitstream. into Dolby
Digital bitstream
or PCM.
■■ If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Setting are not applied. Output will be PCM 2ch.

Blu-ray Discs may include three audio streams :

-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.

43 - English
Appendix
Resolution according to the output mode

Blu-ray Disc/E-contents/Digital Contents playback DVD playback

HDMI Mode
Output
E-contents/ HDMI Mode
Setup Blu-ray Disc
Digital contents
Resolution of Blu-ray
BD Wise 1080p@60F 480i
Disc
Auto Max. Resolution of TV input Max. Resolution of TV input
1080p@60F 1080p@60F -
1080p - 1080p
Movie Frame : Auto (24Fs) 1080p@24F -
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p

Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not
listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact
Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).

Symptom Check/Remedy

You cannot eject the disc. ●● Is the power cord plugged securely into the outlet?
●● Turn off the power, and then turn it back on.

Playback does not start. ●● Check the region number of the Blu-ray/DVD disc.
A Blu-ray/DVD disc purchased from abroad may not be playable.
●● CD-ROMs and DVD-ROMs cannot be played on this product.
●● Make sure that the rating level is correct.

Playback does not start ●● Are you using a deformed disc or a disc with scratches on the surface?
immediately when you press ●● Wipe the disc clean.
the 6/7 button.

No sound. ●● The home theater does not play sound during fast playback, slow playback,
and step motion playback.
●● Are the speakers connected properly? Is the speaker setup correctly customized?
●● Is the disc severely damaged?

You can only hear sound ●● On certain Blu-ray/DVD discs, sound is output from the front speakers only.
from a few speakers, but not ●● Check if the speakers are connected properly.
all 6. ●● Adjust the volume.
●● When playing audio from a CD, the radio, or a TV, the unit outputs sound to the
front speakers only.

44 - English
 Symptom Check/Remedy

Dolby Digital 5.1 CH ●● Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Surround Sound is not Sound is produced only if the disc is recorded with 5.1 channel sound.
produced. ●● Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?

The remote control does not ●● Are you operating the remote within its operational range and within the proper
work. angle relative to the sensor?
●● Are the batteries drained?
●● Have you selected the correct mode? Press the function button to change the
mode (BD/DVD, D. IN, AUX, etc.)

●● The disc is rotating but ●● Is the TV power on?

there is no picture. ●● Are the video cables connected properly?
●● Picture quality is poor and ●● Is the disc dirty or damaged?
the picture is shaking. ●● A poorly manufactured disc may not be playable.

Audio language and subtitles ●● The Audio Language and subtitle functions will not work if the disc does not
do not work. contain multiple language sound tracks or subtitles.

The menu screen does not ●● Are you using a disc that does not contain menus?
appear even when you select
the menu function.

The aspect ratio cannot be The home theater can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter

Appendix
●●

changed. Box mode, or 4:3 Pan-Scan mode, but plays 4:3 Blu-ray/DVD discs in 4:3 mode
only. Refer to the Blu-ray Disc jacket, and then select the appropriate aspect ratio.

●● The product is not ●● Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
working. This will reset the unit.
(Example: The power goes -- Using the RESET function will erase all stored settings.
off or you hear a strange Do not use this function unless necessary.
noise.)
●● The Product is not
working normally.

You have forgotten the ●● With no disc in the product, press and hold the product's 5 button for longer
rating level password. than 5 seconds. INIT appears on the display and all settings will return to their
default values.
-- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.

Can't receive radio ●● Is the antenna connected properly?

broadcasts. ●● If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.

There is no sound when ●● If you press the ^ button while listening to TV audio using the D. IN or AUX
you try to listen to TV audio functions, the Blu-ray/DVD disc functions are turned on and the TV audio is
through the home theater muted.
speakers.

"Not Available" appears on ●● The feature is unavailable or the action cannot be completed at this time
screen. because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.

45 - English
Appendix
Symptom Check/Remedy

If the HDMI output is set to ●● Press and hold the 5 button on front panel for more than 5 seconds with no
a resolution your TV cannot disc in the product. All settings will revert to their factory settings.
support (for example,
1080p), you may not see a
picture on your TV.

No HDMI output. ●● Check the connection between the TV and the HDMI jack of the product.
●● Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.

Abnormal HDMI output ●● If random noise appears on the screen, it means that TV does not support HDCP
appears on the screen. (High-bandwidth Digital Content Protection).

DLNA function

You can see folders shared ●● DLNA shows only Photo, Music, and Movie files. It does not display other kinds
through DLNA, but cannot of files.
see the files.

Video plays intermittently. ●● Check if the network is stable.

●● Check if the network cable is properly connected and if the network is
overloaded.

The DLNA connection ●● IP addresses under the same subnetwork should be unique, otherwise IP collision
between the TV and PC is can cause an unstable connection.
unstable. ●● Check if you have a firewall enabled.
If so, disable the firewall function.

BD-LIVE

The home theater cannot ●● Test whether the network connection is active by using the Network Status
connect to the BD-LIVE function.
server. ●● Check whether a USB memory device is connected to the product.
●● The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See pages 35
and 38.)
●● See if the BD-Live Internet Connection option is set to Allow(All).
●● If all above fails, contact the content provider or update to the latest firmware.

When using the BD-LIVE ●● The USB memory device must have at least 1GB of free space to accommodate
service, an error occurs. the BD-LIVE service.
You can check the available size in BD Data Management. (See pages 35
and 38.)

✎✎ When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.

We will provide you with the amount of the administration fee before we make a home visit or begin any work on
your product.
We recommend you read this manually thoroughly, search for a solution on line at www.samsung.com,
or contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864) before seeking to repair your product.

46 - English
 Specifications

Weight 4.19 Ibs

Dimensions 16.9 (W) x 2.2 (H) x 8.8 (D) inches
General
Operating Temperature Range +41°F to +95°F
Operating Humidity Range 10 % to 75 %
Signal/noise ratio 55 dB
FM Tuner Usable sensitivity 12 dB
Total harmonic distortion 1.0 %
Video 1080p, 1080i, 720p, 480p
HDMI
Audio PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output 165W x 2 (3Ω)
Center speaker output 170W (3Ω)
Surround speaker output 165W x 2 (3Ω)
Subwoofer speaker output 170W (3Ω)
Amplifier
Frequency response 20Hz~20kHz (±3dB)
S/N Ratio 70dB
Channel separation 60dB

Appendix
Input sensitivity (AUX) 500mV
Speaker (5.1ch speaker system)
Speaker Dimensions Weights
Impedance Frequency range Rated input
system (W x H x D) (inches) (Ibs)
Front 3.3 x 4.0 x 6.7 0.99
165W
Surround 200Hz ~ 20kHz 3.3 x 4.0 x 5.1 0.87
3Ω
Center 10.6 x 3.4 x 4.0 1.27
170W
Subwoofer 20Hz ~ 200Hz 10.0 x 11.7 x 10.0 9.78

✎✎ Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
✎✎ Weight and dimensions are approximate.
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For the power supply and Power Consumption, refer to the label attached to the product.
✎✎ Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877)
278 - 0799

ĞĞ SWA-7000

Weight 1.61 lbs Operating Humidity Range 10% ~ 75%

Dimensions (W x H x D) 2.0 x 7.9 x 5.2 inches Output 165W x 2 CH
Operating Temperature Frequency range 20Hz~20KHz
+41°F to +95°F
Range
S/N Ratio 65dB

47 - English
Appendix
Licenses

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from

DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together
are registered trademarks, and DTS-HD Master Audio | Essential is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.

DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks
of their respective owners.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA."
This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret
protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-
2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

- Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu.

48 - English
 LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton
to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and
service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized
service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement
parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if
provided, are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except
to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not
apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation;
applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage
or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment,
systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors
not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect
electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,
cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book;
product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal
transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG
BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY
BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized
Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED
FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE
PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/
authorized_resellers.html.
© 2015 Samsung Electronics Co., Ltd. All rights reserved.

QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT WRITE

Samsung Electronics America, Inc.

1-800-SAMSUNG www.samsung.com/us/
IN THE US 85 Challenger Road
(1-800-726-7864) support
Ridgefield Park, NJ 07660

AH68-02771A-00 AH68-02771A-00