3m

SIT 230V, 1Ø, 2WIRE

E
M
2# 8mm2 THHN Cu @
3m

50A
S1
16mm Ø RMC

2
1 20A 30A 2
3 20A 30A 4

S2 WM
S1
1
VICINITY MAP ONE LINE DIGRAM
LIGHTING LAYOUT POWER LAYOUT

CKT. UNIT POWER VOLTAGE CURRENT CIRCUIT

NO. LOAD DESCRIPTION. QTY. (WATTS) (VOLTS) (AMPHERES) WIRE SIZE CONDUIT
PROTECTION

2 # 2.0mm2
1 LIGHTING OUTLET
at 100watts/outlet
4 400 230 1.74 20AT
THHN Cu.
16mm Ø PVC 40 LEGENDS AND SYMBOL GENERAL NOTES
1. THE ELECTRICAL INSTALLATION HEREIN
SHALL BE DONE IN ACCORDANCE WITH
CONVENIENCE OUTLET
2 720 230 3.13 20AT 2 # 3.5mm2 16mm Ø PVC 40 2-GANG CONVENIENCE OUTLET
PROVISIONS OF THE LATEST EDITION
2 at 180watts/outlet
THHN Cu. INCANDESCENT LIGHT OF THE PHILIPPINE ELECTRICAL CODE,
AND LOCAL RULES AND REGULATIONS.
2 # 3.5mm2 CONNECTION LINE
3 WELDING MACHINE 1 2000 230 8.70 20AT 16mm Ø PVC 40 2. ALL ELECTRICAL WORKS HEREIN SHALL BE
THHN Cu.
POWER LINE EXECUTED BY EXPERIENCED MEN UNDER
THE SUPERVISION OF A DULY REGISTERED
2 # 3.5mm2 PANEL BOARD
4 SPARE 1 5520 230 24 30AT 16mm Ø PVC 40 ELECTRICAL ENGINEER. WORKS SHALL BE
THHN Cu. NEATLY PLACED, SECURELY FASTENED
CIRCUIT HOMERUN AND PROPERLY FINISHED.
SCHEDULE OF LOADS
S1 SINGLE POLE SWITCH 1-GANG PLATE 3. SERVICE ENTRANCE IS SINGLE-PHASE,
TWO WIRE PLUS GROUND, 230 @60Hz.
DESIGN COMPUTATION: RECOMMENDED MAIN DISCONNECTING MEANS: 50AT SERVICE ENTRANCE
SINGLE PHASE @ 230V, 60Hz MAIN FEEDER SIZE: 2# 8mm2 THHN Cu 4. MATERIALS SHALL BE NEW AND SHALL
SIZE OF CONDUIT: 16mm Ø RMC CIRCUIT BREAKER CONFORM WITH THE PROVISIONS OF THE
UNDER WRITERS LABORATORIES INC, IN
TOTAL CURRENT=(1.74 + 3.13 + 8.7 + 24)(0.8DF) COMPUTATION WELDING MACHINE EVERY CASE WHERE SUCH A STANDARD
= 30.06A WM HAS BEEN ESTABLISHED.

PROJECT TITLE/LOCATION: OWNER: SHEET CONTENT: SHEET NO.

FRANKNEL C. TIONGSON
SCHEDULE OF LOADS
REGISTERED ELECTRICAL ENGINEER ONE LINE DIAGRAM
E1
TEMPORARY CONNECTION WILLIAM VALERIO COMPUTATION
VICINITY MAP
Bayan, Orani, Bataan PRC NO: PTR NO: LEGEND AND SYMBOLS
POWER LAYOUT
ISSUED ON:11/05/21 ISSUED ON:02/03/22 LIGHTING LAYOUT E1 E1