Data sheet 6ES7141-6BG00-0AB0
SIMATIC DP, ET 200ECO PN, 8 DI 24 V DC; 8xM12, Degree of protection IP67
General information
Vendor identification (VendorID) 002AH
Device identifier (DeviceID) 0306H
Supply voltage
Rated value (DC) 24 V
Reverse polarity protection Yes
power supply according to NEC Class 2 required Yes
Input current
Current consumption, typ. 100 mA
from supply voltage 1L+, max. 4A
Encoder supply
Number of outputs 8
24 V encoder supply
● Short-circuit protection Yes; Electronic
● Output current, max. 100 mA; per output
Power loss
Power loss, typ. 4.5 W
Digital inputs
Number of digital inputs 8
● in groups of 1
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 60 °C, max. 8
Input voltage
● Rated value (DC) 24 V
● for signal "0" -3 to +5V
● for signal "1" +11 to +30V
Input current
● for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max. typically 3 ms
— at "1" to "0", max. typically 3 ms
Cable length
● unshielded, max. 30 m
Encoder
Connectable encoders
● 2-wire sensor Yes
6ES71416BG000AB0 Subject to change without notice
6/20/2023
Page 1/3 © Copyright Siemens
— permissible quiescent current (2-wire sensor), max. 1.5 mA
Interfaces
Transmission procedure 100BASE-TX
Number of PROFINET interfaces 1
1. Interface
Interface types
● M12 port Yes
● integrated switch Yes
Interface types
M12 port
● Autonegotiation Yes
● Autocrossing Yes
● Transmission rate, max. 100 Mbit/s
Protocols
Supports protocol for PROFINET IO Yes
PROFINET CBA No
PROFIsafe No
PROFINET IO Device
Services
— IRT with the option "high flexibility" Yes
— Prioritized startup Yes
Redundancy mode
Media redundancy
— MRP Yes
Open IE communication
● TCP/IP No
● SNMP Yes
● DCP Yes
● LLDP Yes
● ping Yes
● ARP Yes
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
Diagnoses
● Diagnostic information readable Yes
● Monitoring the supply voltage Yes; green "ON" LED
● Wire-break in signal transmitter cable Yes
● Short-circuit encoder supply Yes; Per channel group
● Group error Yes; Red/yellow "SF/MT" LED
Potential separation
between the load voltages Yes
between load voltage and all other switching components No
between Ethernet and electronics Yes
Potential separation channels
● between the channels No
Isolation
tested with
● 24 V DC circuits 707 V DC (type test)
● Test voltage for interface, rms value [Vrms] 1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection IP65/67
connection method
Design of electrical connection 4/5-pin M12 circular connectors
Dimensions
Width 60 mm
Height 175 mm
Depth 49 mm
Weights
6ES71416BG000AB0 Subject to change without notice
6/20/2023
Page 2/3 © Copyright Siemens
Weight, approx. 910 g
last modified: 10/25/2021
6ES71416BG000AB0 Subject to change without notice
6/20/2023
Page 3/3 © Copyright Siemens
