INNOVATIONS 24.
3
SYSTEM SCAN AND CONNECTION
In this version, the location of the system scan functionality has been changed, it is now
pre-selected by default in the list of systems when accessing a model. It is possible to
use the system type selection filters to perform the system scan of only those systems
identified as main systems.
In addition, from this version, the button to connect to a system appears together with
the selected system.
OTHER FUNCTIONALITIES
- Removal of expert mode management by code. Therefore, from this version, there will
be no code to enable the expert mode, it is only necessary to accept the terms and
conditions of use. Jaltest Diagnostics will continue to inform the users in all advanced
actions under expert mode so that they can take the necessary precautions. On the other
hand, for enterprises where expert mode code would be useful, the creation of user roles
from GRP is recommended in order to have different levels of access.
-
- Improved representation of measurements in diagnostics reports.
- To avoid excessive number of clicks when accessing a system, connection instructions
are no longer displayed. If more information is required, it is necessary to go to the
connection information button to access connection instructions on which cable to use.
- The technical information buttons are not disabled when the licence expires, however,
access is not allowed.
- Improved management of licences and subscribed products. From this moment on, the
Jaltest licence menu displays a breakdown of the status and expiry date of each
subscribed module.
Jaltest Central Services
New functionalities through the Jaltest Central Services remote service. The following
functionalities, among others, are highlighted:
- DAF, programming of the PCI engine control system in Euro 6 vehicles.
- IVECO, programming of the IBC3 central computer.
- VOLVO, programming of the ACM exhaust gas treatment system.
Take into account that this document is only a summary of the most relevant
information of this new version. For further information, please visit Jaltest Report.
BRANDS AND MODELS
Some of the new models and brands of this version are listed below. It is important to
note HINO and ISUZU brands from Japanese market.
TRUCK
BYD
ETH8 EV
EYT EV
FORD
Cargo 1843T, engine: EcoTorq Euro3
Cargo 3543D, engine: EcoTorq Euro3
IVECO
Eurocargo Euro3/5 Asia-Pacific
Tector Euro6 Latin America
MAN
TGX Latin America, engine: ... - Euro 5 EEV [2012 - …]
MERCEDES-BENZ
Atego 9BM951.5 Euro 6 [2023 - ...]
Accelo 1316 Euro 6 (9BM951.102), engine: OM 924 LA [2023 - ...]
MITSUBISHI FUSO
Fighter 19, engine: 6M60 [2019 - ...]
Fighter 19, engine: 4V20
UD TRUCKS
Condor, engine: GH5
VOLKSWAGEN
New Delivery 6.160 Euro 5, engine: ISF [2018 - …]
New Delivery 11.180 Euro 5, engine: ISF [2018 - …]
Delivery Express Euro 6, engine: FPT F1C [2022 - …]
Constellation 14.210 Euro 6, engine: D0834LF08 [2023 - ...]
Constellation 17.210 Euro 6, engine: D0834LF08 [2023 - ...]
BUS
ALEXANDER DENNIS
Enviro 400H
Enviro 500 Euro6
GÜLERYÜZ
ECOLINE 10/12
EFORA
PANORA
IVECO /IRISBUS
CROSSWAY LE CNG Euro 6-E
MERCEDES-BENZ
Volare LO 916 (9BM979.27)
OF/OH Euro 6 (9BM384/368)
O 500 / MBO - Euro 5/6 (9BM382/634/685)
MITSUBISHI FUSO
Aero Star, engine: 6M60 [2019 - ...]
Rosa, engine: 4D33
SCANIA
K Series K 360C A [2020 - …]
K Series K 360 H [2020 - …]
K 460 IB
VOLVO
B320R
LIGHT COMMERCIAL VEHICLE
CITROËN
Berlingo 1.6 Hdi, engine: 9HY/9HX/9HW [2005 - 2012]
FIAT
E-Ducato [2021 - ...]
FORD
Ranger 3.0 (P703), engine: BF2S [2022 - …]
MERCEDES-BENZ
X-Klasse (470), engine: OM 642.889 [2018 - …]
NISSAN
Townstar 1.3 DIG-T, engine: H5H 490 [2022 - ...]
e-NV200 EM57 [2014 - 2022]
PEUGEOT
Partner 1.6 Hdi, engine: 9HY/9HX/9HW [2005 - 2012]
RENAULT
Express 1.3 TCe, engine: H5H 470/490 [2021 - …]
DIAGNOSTICS AND SYSTEMS
TRUCK
DAF
ECS4/ECS6 engine control system in LF Euro6 [2022 - …] models.
ZF PowerLine transmission in LF Euro6 [2022 - …] models.
EHS electro-hydraulic steering control system in CF, XD, XG and Euro6 models.
FORD
ZF EcoTronic transmission in Cargo models with Euro5/6 engines.
BCM central computer, height sensor calibration and suspension pressure calibration.
EDC 17 CV41 engine control system in F-Max models, check of the 2-speed water pump
and air purge of the fuel system for the exhaust gas aftertreatment system.
IVECO
New OEM RMI technical information with fault code troubleshooting guides included
in the ECM MD1 CNG engine control system.
MAN
NoNOx exhaust gas aftertreatment system in models of the TG2 [2013 - …] series, control
unit replacement with the same reference without restrictions to certain serial numbers.
New technical information in diagrams by
model of the brand, in addition, new diagrams
by model in TGM and TGL models of the TG3
series.
Information available with the subscription of the
new technical information module ‘Jaltest INFO
Plus’.
EBS5/5.x (on KWP2000) braking system, control unit software update.
Information available with the ‘Knorr-Bremse Diagnostics’ subscription, the new diagnostics
platform for all Knorr-Bremse systems.
MERCEDES-BENZ
Wabco TCM 05T transmission for G211-12/ G 330-12 / G 291-12 / G 280-16 gearboxes
in Actros 5 (963/964), Arocs 5 (964) and Atego 9BM951.5 Euro6 models.
With this new electronic control system, the manufacturer improves efficiency by
optimising the gear shift process.
New technical information in diagrams by model of the brand, in addition, new diagrams
by model in Atego (967) and Atego 5 (967) models.
Information available with the subscription of the new technical information module ‘Jaltest
INFO Plus’.
RENAULT
In vehicles with V3 technology:
EMS engine control system, check of the
exhaust gas back pressure regulation. Poor
performance of this regulation leads to reduce
efficiency and premature engine wear, among
other effects.
EAC 1 (on SAE 1587) compressed air generation and maintenance system, control of new
references and software versions.
Information available with the ‘Knorr-Bremse Diagnostics’ subscription, the new diagnostics
platform for all Knorr-Bremse systems.
SCANIA
OEM RMI SCANIA documentation.
In addition to Jaltest technical information, it is now possible to access the
manufacturer's repair and maintenance information (RMI), integrated in Jaltest, while
accessing and diagnosing Scania vehicles. This library provides access to all technical
information documents through the chassis number (VIN).
Information available with the ‘Jaltest OEM RMI Scania’ subscription.
COO10 coordinator in models of the SUPER range from 2023 onwards, configuration of
the next service date, configuration of power take-off parameters and calibration of the
steering angle sensor, among others.
TMS3 transmission in G, L, P, R and S Series models, control of emptying and filling of
the crankcase oil tank, among others.
VOLKSWAGEN
FPT F1C EDC engine control system in Delivery 6.170 Euro6 and Delivery Express
Euro6 models.
VOLVO
In vehicles with V4 technology:
New JCS (Jaltest Central Services) functions for updating or replacing the control unit for
the following systems: ACM, TECU, among others.
EBS5/5.x braking system, control unit replacement and control unit software update.
Information available with the ‘Knorr-Bremse Diagnostics’ subscription, the new diagnostics
platform for all Knorr-Bremse systems.
BUS
IRIZAR
TCU electric motor control system, ESS energy storage system, Master 25
multiplexed system and SCU hydraulic pump controller for electric vehicles in the ie
Tram / ie bus/ i2e model.
KING LONG
Inverter 1 / 2 / 3 and 4 systems for electric vehicles in the PEV12 model.
OTOKAR
New technical information in diagrams by model of the brand, in addition, new diagrams
by model in Vectio, Territo and Ulyso Euro6 models.
Information available with the subscription of the new technical information module ‘Jaltest
INFO Plus’.
VDL
New wiring diagram configurations in the ECAS CAN 2 suspension control system in
Citea and Futura models.
TRAILER
KNORR-BREMSE
Information available with the ‘Knorr-Bremse Diagnostics’ subscription, the new diagnostics
platform for all Knorr-Bremse systems.
TRM (Train Road Module).
TPMS tyre pressure control system.
TIM (Trailer Information Module).
TEBS G2.x brake control system, modification of relevant and frequent parameters in
some system variants. In addition, the module replacement and software update of the
control units are completed by adding the old TEBS6 variants.
LIGHT COMMERCIAL VEHICLE
FIAT
DCU exhaust gas aftertreatment system in Fiat Ducato [21], system leak test.
PAM parking assistance system.
IVECO
ASM AMK AirPro suspension control system in Daily [2021] models.
MERCEDES-BENZ
KLA climate control in Sprinter 907/910
models, calibration of actuator motors.
OM654 EDC engine control system in
Sprinter 907/910 and Vito 447 models,
maintenance reset after the Diesel Particulate
Filter replacement.
VOLKSWAGEN
EDC MD1 engine control system in Crafter [2021 - …] models, leak test and fuel system
priming, among others.
AT 8-Speed 0DR transmission in Amarok [2016 - …] and Crafter [2021 - …] models.
RFK rear camera in Caddy [2020 - …] models.
MANUFACTURER
CUMMINS
It is important to highlight improvements in the configuration of remote power take-off
parameters for all CUMMINS engine control systems.
Replacement procedures of the fuel filter, oil filter and AdBlue/DEF filter, and check
procedure of the fuel pump for all CUMMINS engines.
New wiring diagram configurations in several systems such as B4.5/6.7 CM2350, ISF/F3.8
CM2350 and B6.7N CM2380.
More than 40 SMART troubleshooting guides in the X15 CM2670 engine control system
and more than 200 SMART troubleshooting guides in the ISV CM3230 engine control
system.
Information available with the subscription of the new technical information module ‘Jaltest
INFO Plus’.
ISF/F3.8 CM2350 engine control system, DPF reset.
KNORR-BREMSE
Information available with the ‘Knorr-Bremse Diagnostics’ subscription, the new diagnostics
platform for all Knorr-Bremse systems.
iTPMS tyre pressure monitoring system for commercial vehicles.
The connection instructions in Knorr-Bremse systems have been expanded significantly.
In addition, the ECU reset function has been included in EPB parking brake control
systems and in EAC compressed air generation and maintenance systems of different
vehicle brands. In the latter systems, the user experience has been improved with the
implementation of the ‘DISPLAY CARTRIDGE CONDITION’ maintenance which directly
includes the replacement function if necessary and/or counter reset.
ZF
ZF AVE 130 control system of the electric drive axle, operation data relating to voltages
and currents, as well as battery state and temperatures.
