A103

15' - 6"
44' - 9"

22' - 11" 21' - 10"

22' - 11" 21' - 10"

Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
89 FILL VOID
than the stated project.
Requirements and Approvals: It is the
HRV .0
NUDURA Mechanical 1° builder's responsibility to obtain prior
written approval for changes to materials
NUDURA FROST WALL
8' - 9 7/8"

FROST WALL room or workmanship which deviates from the

21' - 0 1/8"

11' - 11 7/8"
instructions provided by these

12' - 3 1/8"
S/CO2
documents.
Soil Gas Authorities Requirements and
Pipe Outlet Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,

6' - 11"
UP
3' - 0"
21' - 10" present edition,and with the requirements
FILL VOID of all authorities having
jurisdiction over the work. It is the builder's
responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
verified onsite. Do not scale off drawings.

ICF Frost Wall

If discrepencies exist notify the designer.
All minimum dimensions

7' - 7 5/8"
2
17' - 10 1/8"

So 3' - 0"
il G

1 : 50

36' - 10"
S/CO2
as
1 6' - 11"
A104
36' - 6"

Pip
e 1

Recreational room CL ISSUED FOR

PERMIT

24' - 10"
3' - 0"
6' - 11"
FLOOR LEVEL
6' - 10 3/4"
6' - 1 5/8"

6' - 11"
3' - 0"

0' - 0"

17' - 2 1/2"
S/CO2
55 55
This
Existing Foundation Wall Insulation: R10 2" SM Rated Foam
issue:
S/CO2
9' - 10"

CL Bedroom Bedroom

0°
November 15

.6
90
6' - 10 3/4"
6' - 10 3/4"

6' - 1 5/8"
6' - 1 5/8"

17' - 1 1/4" 6' - 7 3/8" 9' - 7 7/8" 5' - 3 3/4" 6' - 0 3/4" 2" R10 SM RATED FOAM

17' - 1 1/4" 27' - 7 3/4"

WINDERMERE
Existing Foundation
8" FOUNDATION WALL Wall Insulation: R10 2"
Horizonal: 10mm rebar on 16" o/c SM Rated Foam
Vertical: 10mm rebar on 24" o/c

Existing Deck Structure to be removed BASEMENT

Drawing Title:
NOTE: ALL INTERIOR DOORS ARE
36 INCHES WIDE.
-9' - 6"
4" (100mm) CONTINUOS 24" WIDE x 10" DEPTH
PERFORATED DRAIN TILE COVERED
WITH 6" (150mm) GRANULAR FILL
CONTINOUS CONCRETE
FOOTING ON UNDISTURBED Basement
SOIL AS PER CODE

Watercourse Buffer Drawn By Drawing Number

Existing Footing/Foundation
3
Autor
Date
1 : 50 2021/11/11
A100

9/13/2022 9:43:36 AM
1-
BASEMENT Revision

1 1/8" = 1'-0"
A105
Scale
0

As indicated
 64' - 9"

16' - 2" 48' - 7"

1' - 10 3/8"
7' - 7 7/8" 8' - 6 1/8" 7' - 9 5/8" 3' - 5 1/8" 2' - 1" 4' - 9 5/8" 3' - 8 3/4" 3' - 7 3/4" 4' - 6 1/8" 5' - 8 5/8" 6' - 6 1/8" 4' - 6"

12' - 0"
8' - 6"
FILL VOID

71 70 62

8' 2 1/2"
6' 7 5/8"
13' - 1 7/8"

7' - 6 1/2"
Riser: 7 13/32"
Tread: 10"
7' - 0" 3' - 0"
MAIN BEDROOM
21' - 0 1/8"

GARAGE 8' - 5 5/8" 3' - 9 1/2" CL 7' - 0"

6
30 M

Sealed Garage Door

62 152 ft² Copyright:

6' - 11"
with Self Closer

3' - 0"
The use of this drawing shall be covered
UP

6' - 0 1/4"
292 ft² S/CO2 by standard copyright law. This drawing
3' - 6" may not be used or any purpose other
3' - 0"
7' - 10 1/4"

than the stated project.

8' - 0" 6' - 11" Requirements and Approvals: It is the
builder's responsibility to obtain prior

3' - 0"
7' - 0"
Column Footing
written approval for changes to materials
or workmanship which deviates from the
6' - 10 1/4"

2
3' - 2 1/2"

3' - 0" instructions provided by these

5' - 9 7/8"
documents.
7' - 0"
1' - 10 1/4"

Authorities Requirements and

Approvals: All materials and

DN S/CO2 1/4" = 1'-0" workmanship must comply with the

National Building Code of Canada,

4' - 8 1/8"
present edition,and with the requirements
6' - 7"

Deck
63 of all authorities having
REF. jurisdiction over the work. It is the builder's

2' - 6"
7' - 0"

5' - 3 3/8"
responsibility to gain necessary approvals
and inspections from relevent authorities.
56' - 11 3/4"

Dimensions: All dimensions must be

LIVING & DINING

4' - 0"
verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
14' - 0 3/4"

F 67 All minimum dimensions

9

52' - 3 1/8"
52' - 3 1/2"
Not Enclosed

7' - 6 3/8"
KITCHEN
13' - 8 1/2"

10 FLOOR LEVEL ISSUED FOR

3' - 11 7/8"
64 66 PERMIT
280 ft² 0' - 0"
35' - 11 5/8"

4' - 7 7/8"
5' - 1 1/2"

1' - 6"
56 57 58

4' - 11 3/8"
Deck 49 sq.ft This
issue:

1' - 0"
November 15
14' - 11 1/8"

7' - 10"
Existing Deck Structure to be removed

10' - 5 3/8"
166 sq.ft BASEMENT
Rebar Detail: 15mm Grid 6"
19 SPRIGVALE
o/c. 10mm Stirrups 6" o/c on
Column. -9' - 6" AVENUE
Watercourse Buffer
13' - 0" 2' - 10" 8' - 10 1/8" 12' - 2 7/8" 14' - 5 1/2" 8' - 10 1/2" 4' - 6 3/8"

60' - 3" 4' - 6 3/8"

4' - 0"
64' - 9 3/8" Drawing Title:

3' - 6"
First floor

1' - 4"
Drawn By Drawing Number
6*15m Vertical Rebar in
Column Tied into Footing
with Minimum 12" Overlap 3' - 6"
Author
3' - 6"

Date
Understurbed Soil

2021/03/10
A101

9/13/2022 9:43:38 AM
42" X 42" isolated footing
Revision

FLOOR LEVEL Column floor plan Column Footing Scale

0

1 1/8" = 1'-0"
3 1/4" = 1'-0"
4 1/4" = 1'-0" As indicated
 A103

60' - 3 1/8" 1
16' - 2" 44' - 1 1/8"

3' - 5 7/8"
3' - 8 1/4" 3' - 9 3/8" 8' - 8 3/8" 7' - 4 1/8" 3' - 10 7/8" 1' - 10 3/8" 4' - 11 5/8" 1' - 7 1/8" 7' - 9 1/2" 10' - 1 1/4" 6' - 6 1/4"

72 72

FILL VOID

1' - 1 3/8"
69
62 71 70
Copyright:

13' - 1 7/8"
The use of this drawing shall be covered

3' - 0"
7' - 0"
LAUNDRY by standard copyright law. This drawing

6' - 11 3/4"
may not be used or any purpose other

24
BEDROOM 2 than the stated project.
Requirements and Approvals: It is the

8' - 9 3/8"
S/CO2
builder's responsibility to obtain prior
CL
S/CO2

14' - 10" 22 written approval for changes to materials

63 ft² or workmanship which deviates from the

6' - 11"
3' - 0"
64 instructions provided by these
documents.
159 ft²

1' - 11 1/8" 4' - 2 3/4"

62 Bookcases Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
DN
4' - 11 1/8"

National Building Code of Canada,

3' - 0"
8' - 0"

3' - 0"
8' - 0"
3' - 0" present edition,and with the requirements
6' - 11" of all authorities having

3' - 6 1/4"
6' - 1 5/8"
8' - 0 5/8"
jurisdiction over the work. It is the builder's
S/CO2 68 responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
59 verified onsite. Do not scale off drawings.
OFFICE + CATWALK

41' - 7"
5' - 6"

1' - 11 1/4"
If discrepencies exist notify the designer.
BALCON
Y W.C. All minimum dimensions
46' - 2 1/4"

46' - 3 7/8"
S/CO2 26
A106 1 D 13 1 A104
0' - 11"

63 520 ft²

3' - 0 1/8"
106 ft²
ISSUED FOR

19' - 2 3/4"
MR SSHH PERMIT
12' - 5 1/8"

F
33
S/CO2

LIVING DINNING 2DO

FLOOR MASTER BEDROOM 133 ft²
4' - 6"

32 28
This
64 issue:
250 ft² 187 ft²
3' - 0"
5' - 1 1/2"

65
6' - 11" November 15

2' - 8"
6' - 1 5/8"
8' - 0 5/8"
60 57 57 BALCONY 61

4' - 8 7/8"

4' - 8 7/8"
4' - 3 1/4"

15' - 6" 9' - 7 1/4" 11' - 11 3/8" 1' - 9 5/8" 6' - 0 1/4" 4' - 7 3/8" 6' - 2 1/4" 4' - 7"
WINDERMERE

15' - 6" 44' - 9 1/8"

60' - 3 1/8"

Drawing Title:

Second floor
Watercourse Buffer
Drawn By Drawing Number

Author
Date
1-
2ND FLOOR 2021/11/11
A102

9/13/2022 9:43:38 AM
1 1/8" = 1'-0"
A105
-
Revision

0
Scale

1/8" = 1'-0"
 Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
than the stated project.
Requirements and Approvals: It is the
builder's responsibility to obtain prior
written approval for changes to materials
or workmanship which deviates from the
instructions provided by these
documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,
present edition,and with the requirements
of all authorities having

ROOF jurisdiction over the work. It is the builder's

responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
20' - 10" verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
6' 9'' X 2' 5/8'' 6' 9'' X 2' 5/8'' 6' 1'' X 2' 5/8'' 6' 1'' X 2' 5/8''
All minimum dimensions

10' - 4"
1' 7'' x 8' 5/8''
26' - 7 1/2"

1' 7'' x 8' 5/8'' 2ND FLOOR ISSUED FOR

28' - 9"

PERMIT

10' - 6"
6' 9'' X 2' 5/8''

30' - 4"
10' - 6"
6' 7 5/8'' x 8' 2 3/4''

FLOOR LEVEL This

issue:

0' - 0"
November 15
AVERAGE GRADE

9' - 6"
44' - 1" 16' - 2"

BASEMENT WINDERMERE

-9' - 6"

Drawing Title:

South

South Drawn By Drawing Number

1 1/8" = 1'-0" Date

Author

2021/11/11
A103

9/13/2022 9:43:39 AM
Revision

0
Scale

1/8" = 1'-0"
 Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
than the stated project.
Requirements and Approvals: It is the
builder's responsibility to obtain prior
written approval for changes to materials
or workmanship which deviates from the
instructions provided by these
documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,
present edition,and with the requirements
of all authorities having
jurisdiction over the work. It is the builder's
responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
ROOF All minimum dimensions

20' - 10"
4' 1'' x 8' 5/8'' 3' 5' x 5' 4 5/8'' 8' 1 3/8'' x 8' 5/8'' 1' 7'' x 6' 5/8''

10' - 4"
ISSUED FOR
PERMIT

2ND FLOOR
10' - 6"
9' 3 3/4'' x 8' 1/4''
8' 1 3/8'' x 5' 5/8'' 4' 1'' x 5' 5/8''
This

30' - 4"
issue:

10' - 6"
9' - 0"

FLOOR LEVEL November 15

0' - 0"
AVERAGE GRADE

9' - 6"
WINDERMERE
7' - 10"

BASEMENT
7' - 2"
Drawing Title:
-9' - 6"
West

Drawn By Drawing Number

West Autor

1
Date

1/8" = 1'-0" 2021/11/11

A104

9/13/2022 9:43:41 AM
Revision

0
Scale

1/8" = 1'-0"
 Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
1 1 than the stated project.
Requirements and Approvals: It is the
builder's responsibility to obtain prior
A108 A107 written approval for changes to materials
or workmanship which deviates from the
instructions provided by these
documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,
present edition,and with the requirements
of all authorities having
jurisdiction over the work. It is the builder's

4 1/2 WOOD FRAMING BETWEEN 4 1/2 WOOD FRAMING BETWEEN

ROOF responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
20' - 10" verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
All minimum dimensions
3' 5'' x 8' 5/8'' 6' 1 5/8'' x 8' 5/8'' 3' 5'' x 8' 5/8'' 17' 7' x 8' 5/8'' 3' 1'' x 8' 5/8'' 3' 1'' x 8' 5/8'' 6' 1 5/8'' x 8' 5/8'' 6' 1'' x 8' 5/8''

10' - 4"
26' - 11 1/8"

ISSUED FOR
2ND FLOOR PERMIT

10' - 6"
3' 2 1/2'' x 6' 10 1/4'' 17' 7'' x 8' 1/4'' 3' 1'' x 8' 5/8'' 16' 2 1/8'' x 5' 5/8''

30' - 4"
10' - 6"
9' - 0"

FLOOR LEVEL This

issue:
0' - 0"
November 15
AVERAGE GRADE

9' - 6"
8' - 6"

2'3'' x 6' 5/8'' 6' 1 5/8'' x 6' 10 3/4'' 2'3'' x 6' 5/8'' 6' 1 5/8'' x 6' 10 3/4'' 6' 1 5/8'' x 6' 10 3/4''

WINDERMERE
BASEMENT
60' - 3" -9' - 6"
Drawing Title:

North

North Drawn By Drawing Number

1 1/8" = 1'-0" Autor

Date

2021/11/11
A105

9/13/2022 9:43:41 AM
Revision

0
Scale

1/8" = 1'-0"
 Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
than the stated project.
Requirements and Approvals: It is the
builder's responsibility to obtain prior
written approval for changes to materials
or workmanship which deviates from the
instructions provided by these
documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,
present edition,and with the requirements
of all authorities having
jurisdiction over the work. It is the builder's
ROOF responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
20' - 10" verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
6' 9'' X 2' 5/8'' 6'1'' x 2' 5/8''
All minimum dimensions
8' 1 3/8'' x 8' 5/8''
8' - 9 3/8"

26' - 11 1/8"
ISSUED FOR
2ND FLOOR PERMIT

10' - 6"
21' - 1 7/8"

6' 9'' X 2' 5/8'' 6'1'' x 2' 5/8''

8' 1 3/8'' x 8' 5/8''
10' - 10 1/2"

FLOOR LEVEL

11' - 8 1/2"
This
issue:
0' - 0"
November 15
AVERAGE GRADE

21' - 0 1/8"

WINDERMERE
BASEMENT
-9' - 6"
Drawing Title:

East

East
Drawn By Drawing Number

1 1/8" = 1'-0" Date

Autor

2021/11/11
A106

9/13/2022 9:43:43 AM
Revision

0
Scale

1/8" = 1'-0"
NOTES:

Walls - Basement

Basement - Existing - Within side yard setback

Metal Cladding
Dimple board
Existing Foundation Wall
2” x 4” @ 16” O.C. Framing
Type X drywall

Basement - Existing
Board and Batten
Dimple board
Existing Foundation Wall
2” x 4” @ 16” O.C. Framing Copyright:
The use of this drawing shall be covered
½” drywall by standard copyright law. This drawing
may not be used or any purpose other
Basement - New (addition) than the stated project.
Board and Batten Requirements and Approvals: It is the
Dimple board builder's responsibility to obtain prior
written approval for changes to materials
ICF or workmanship which deviates from the
2” x 4” @ 16” O.C. Framing instructions provided by these
½” drywall documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
Walls - Stick Framing
1" / 12"
National Building Code of Canada,
present edition,and with the requirements
Typical Wall - Within side yard setback of all authorities having
Sheet Metal Siding
Rain Screen
ROOF jurisdiction over the work. It is the builder's
responsibility to gain necessary approvals
and inspections from relevent authorities.
Sheathing ½”
2” x 6” @ 16” O.C. Framing 20' - 10" Dimensions: All dimensions must be
verified onsite. Do not scale off drawings.
R24 insulation (blown in rigid) If discrepencies exist notify the designer.
Type X drywall All minimum dimensions

10' - 4"
Typical Wall - Standard Framing
Board and Batten
Rain Screen
Sheathing ½”
2” x 6” @ 16” O.C. Framing
R24 insulation (blown in rigid)
½” drywall
2ND FLOOR ISSUED FOR
PERMIT
Typical Wall - Double Height Wall 10' - 6"
Board and Batten
Rain Screen
Sheathing ½”

30' - 4"
10' - 6"
2” x 8” @ 16” O.C. Framing with blocking
9' - 0"

R24 insulation (blown in rigid)

½” drywall

This
Roof Assembly FLOOR LEVEL issue:

Typical Roof
2
Sheet Metal A100 0' - 0" November 15
Strapping
Waterproof membrane
Sheathing ½”
3

9' - 6"
Engineered Roof Rafters
8' - 0"

Hot Roof Rigid Insulation Application R40

(paperwork to be provided) A100
Strapping
½” drywall BASEMENT
WINDERMERE
Floor Assembly -9' - 6"
Typical Floor
Floor material
½” sheathing
Engineered floor joists Drawing Title:
Strapping
½” drywall
Section 1

Section 1
Drawn By Drawing Number

1 1 : 100 Date
Autor

2021/11/11
A107

9/13/2022 9:43:43 AM
Revision

0
Scale

1 : 100
NOTES:

Walls - Basement

Basement - Existing - Within side yard setback

Metal Cladding
Dimple board
Existing Foundation Wall
2” x 4” @ 16” O.C. Framing
Type X drywall

Basement - Existing
Board and Batten
Dimple board
Existing Foundation Wall
2” x 4” @ 16” O.C. Framing Copyright:
The use of this drawing shall be covered
½” drywall by standard copyright law. This drawing
may not be used or any purpose other
Basement - New (addition) than the stated project.
Board and Batten Requirements and Approvals: It is the
Dimple board builder's responsibility to obtain prior
written approval for changes to materials
ICF or workmanship which deviates from the
2” x 4” @ 16” O.C. Framing instructions provided by these
½” drywall documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
Walls - Stick Framing National Building Code of Canada,
present edition,and with the requirements
Typical Wall - Within side yard setback of all authorities having
Sheet Metal Siding jurisdiction over the work. It is the builder's
Rain Screen 1" / 12" responsibility to gain necessary approvals
and inspections from relevent authorities.
Sheathing ½” Dimensions: All dimensions must be
2” x 6” @ 16” O.C. Framing
R24 insulation (blown in rigid)
ROOF verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
Type X drywall All minimum dimensions
20' - 10"
Typical Wall - Standard Framing
Board and Batten
Rain Screen
Sheathing ½”

10' - 4"
2” x 6” @ 16” O.C. Framing
R24 insulation (blown in rigid)
ISSUED FOR
½” drywall
PERMIT
Typical Wall - Double Height Wall
Board and Batten 2ND FLOOR
Rain Screen
Sheathing ½”
2” x 8” @ 16” O.C. Framing with blocking
10' - 6"
R24 insulation (blown in rigid)
½” drywall

30' - 4"
10' - 6"
This
9' - 0"

Roof Assembly issue:

Typical Roof
Sheet Metal November 15
Strapping
Waterproof membrane
FLOOR LEVEL
Sheathing ½”
Engineered Roof Rafters 0' - 0"
Hot Roof Rigid Insulation Application R40
(paperwork to be provided)
Strapping

9' - 6"
½” drywall
8' -- 0"
0"

WINDERMERE
8'

Floor Assembly

Typical Floor BASEMENT

Floor material
½” sheathing
Engineered floor joists
-9' - 6" Drawing Title:
Strapping
½” drywall
18' - 1 7/8"
Section 2

Drawn By Drawing Number

Section 2 Date
Autor

1 1/8" = 1'-0"
2021/11/11
A108

9/13/2022 9:43:43 AM
Revision

0
Scale

1/8" = 1'-0"
 A103
1
A107
1

1' - 6 1/4"
2' - 0"
Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
than the stated project.
Requirements and Approvals: It is the
builder's responsibility to obtain prior
written approval for changes to materials
or workmanship which deviates from the
instructions provided by these
documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,
present edition,and with the requirements
of all authorities having
jurisdiction over the work. It is the builder's

48' - 4"

48' - 4"
responsibility to gain necessary approvals
and inspections from relevent authorities.
A106 1 1 A104 Dimensions: All dimensions must be
verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
All minimum dimensions

2' - 6" 1' - 6 7/8"

ISSUED FOR
PERMIT

48' - 10"

This
issue:

November 15

WINDERMERE

Drawing Title:

ROOF

Drawn By Drawing Number

1-
Author
A105
- Date

2021/11/11
A110

9/13/2022 9:43:43 AM
Revision

ROOF 0

1 1/8" = 1'-0"
Scale

1/8" = 1'-0"
 Copyright:
The use of this drawing shall be covered
by standard copyright law. This drawing
may not be used or any purpose other
than the stated project.
Requirements and Approvals: It is the
builder's responsibility to obtain prior
written approval for changes to materials
or workmanship which deviates from the
instructions provided by these
documents.
Authorities Requirements and
Approvals: All materials and
workmanship must comply with the
National Building Code of Canada,
present edition,and with the requirements
of all authorities having
jurisdiction over the work. It is the builder's
responsibility to gain necessary approvals
and inspections from relevent authorities.
Dimensions: All dimensions must be
verified onsite. Do not scale off drawings.
If discrepencies exist notify the designer.
All minimum dimensions

ISSUED FOR
PERMIT

This
issue:

November 15

WINDERMERE

Perspective
1 Drawing Title:

Perspective

Drawn By Drawing Number

Author
Date

2021/11/11
A111

9/13/2022 9:43:46 AM
Revision

0
Scale