SSD SUPPORT SOLUTIONS
EP1080 - ALL ACTIVE SOLUTIONS
October 2006
This document contains information that was exported directly from Konica Minolta's SSD
Support knowledge base. Some solutions may contain hyperlink references which originally
contained links to graphic or text files. If you wish to view these files, you must access the
solutions via SSD CS Expert Support on Konica Minolta's website, www.kmbs.konicaminolta.us.
Legal Notice
This document is designed as a diagnostic tool, primarily for Konica Minolta's
support personnel, and authorized service representatives. Konica Minolta
recommends that all service be performed by an authorized service
representative. Users are responsible for seeking advice of a Konica Minolta
authorized service representative regarding the information, opinion, advice
or content of this document.
USER AGREES THAT USE OF THIS DOCUMENT IS AT USER'S SOLE RISK
AND THAT THIS DOCUMENT IS PROVIDED ON AN AS IS BASIS WITHOUT
WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER
THAN THOSE WARRANTIES THAT ARE IMPLIED BY LAW AND INCAPABLE
OF EXCLUSION. IN NO EVENT WILL KONICA MINOLTA OR THOSE ACTING
ON ITS BEHALF BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT
LIMITATION, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL
OR PUNITIVE DAMAGES ARISING OUT OF YOUR USE OF THIS DOCUMENT.
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.
EP1080
Solution ID TAUS0632095EN00 Solution Usage 0
Description
The copier begins to cycle, and continues to cycle until the copier is powered off. This problem occurs when paper is fed from any of the paper sources
including the bypass.
Solution
Cause: UN7 has failed.
Solution: Replace UN7 "toner agitation motor drive board". This board is easily damaged if the developer assembly is slid out while the front door interlocks
are cheated.
Solution ID TAUS0632096EN00 Solution Usage 0
Description
What is the part number for the developer assembly for this copier? It is not indicated in the Parts Manual.
Solution
The part number for the developer unit is 1139-0424-01. A service bulletin has never been issued for this item.
Solution ID TAUS0635636EN00 Solution Usage 0
Description
Item numbers for Parts or Service Manuals.
Solution
Please refer to this publications list .
Note:
To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID TAUS0641319EN00 Solution Usage 0
Description
Thermostat replacement precautions for all models using Faston Terminals.
Solution
CAUSE: Damage to the Faston terminal when replacing the thermostat to the Faston terminal can result in the generation of heat and cause the plastic
insulating material around the terminal to melt.
SOLUTION: See Bulletin Number 5005 for details.
Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc. October 2006
