70-667

Microsoft 70-667 TS: SharePoint Server 2010 Configuring

Exam A QUESTION 1 You have a deployment of Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2). The deployment includes the following servers: One Microsoft SQL Server 2005 server named Server1 One SharePoint server named Server2 All servers run the 64-bit edition of Windows Server 2003 Service Pack 2 (SP2). You need to ensure that you can perform an in-place upgrade of SharePoint Server 2010. What should you do? A. B. C. D. On Server1, upgrade SQL Server 2005 to SQL Server 2008. On Server2, install Windows Server 2003 Service Pack 3 (SP3). On Server1, upgrade to the 64-bit edition of Windows Server 2008. On Server2, upgrade to the 64-bit edition of Windows Server 2008.

Answer: D Section: (none) Explanation/Reference:

QUESTION 2 You have a Microsoft Office SharePoint Server 2007 Service Pack 1 (SP1) server farm. All servers in the farm run the 64-bit edition of Windows Server 2003 Service Pack 2 (SP2). You plan to perform an in-place upgrade to SharePoint Server 2010. You need to ensure that you can successfully run the SharePoint Server 2010 Pre-Upgrade Checker. What should you do? A. Install Windows PowerShell 2.0 on all servers in the farm. B. From Central Administration, select the Quiesce farm option. C. Upgrade all SharePoint servers to Windows Server 2008 and install Microsoft .NET Framework 4.0. D. Install Windows SharePoint Services 3.0 Service Pack 2 (SP2) and SharePoint Server 2007 SP2 on all SharePoint servers. Answer: D Section: (none) Explanation/Reference:

QUESTION 3 You have a Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2) server farm. You plan to upgrade to SharePoint Server 2010. You need to identify all potential upgrade issues before you install SharePoint Server 2010. What should you do? A. B. C. D. Run stsadm.exe -o preupgradecheck. Install Windows PowerShell 2.0 and run the test-spcontentdatabase cmdlet. Run psconfig.exe -cmd upgrade from the SharePoint Server 2010 installation files. Download and run the Microsoft Best Practices Analyzer for Windows SharePoint Services 3.0 and the 2007 Microsoft Office System.

Answer: A Section: (none) Explanation/Reference:

QUESTION 4 Multiple Choice In this type of , you select the correct answer or answers from a list of answer choices. Click the Reset button to clear all selected answers. If an Active Exhibit button is present, click it to explore in a simulated environment until you find the information that you need. Then click Close Simulation and answer the . Notes Note the following consideration when answering this type of : You might need to use the scroll bar to view the entire contents of the . You have a Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2) server farm. You upgrade the server farm to SharePoint Server 2010. You open a SharePoint site and discover that you cannot select the Visual Upgrade option. You need to ensure that you can perform a visual upgrade of the SharePoint site. What should you do? A. B. C. D. Run the upgrade-spcontentdatabase cmdlet. Run psconfig.exe and specify the -cmd parameter. Run stsadm.exe and specify the setproperty operation. Run stsadm.exe and specify the preupgradecheck operation.

Answer: A Section: (none) Explanation/Reference:

QUESTION 5 Multiple Choice In this type of , you select the correct answer or answers from a list of answer choices. Click the Reset button to clear all selected answers. If an Active Exhibit button is present, click it to explore in a simulated environment until you find the information that you need. Then click Close Simulation and answer the . Notes Note the following consideration when answering this type of : You might need to use the scroll bar to view the entire contents of the . You have a server that runs Windows Server 2008. You install the English version of SharePoint Server 2010 on the server. You need to ensure that administrators can use Central Administration in French and English. What should you do first? A. B. C. D. Modify the Language settings from Central Administration. Install the French version of SharePoint Server 2010. Install the French language pack for SharePoint Server 2010. Install the French Windows Server 2008 Multilingual User Interface (MUI) Language Pack.

Answer: C Section: (none) Explanation/Reference:

QUESTION 6 You have a Microsoft SQL Server 2008 server named Server1. You install SharePoint Server 2010 on a server named Server2. Server1 and Server2 are joined to the same Active Directory domain. You create a domain user account named Admin1. On Server2, you add Admin1 to the local Administrators group. You need to ensure that Admin1 can create a server farm with least amount of permissions granted. What should you do? A. B. C. D. On a domain controller, add Admin1 to the Domain Admins group. On Server1, add Admin1 to the local Administrators group. On Server1, assign the diskadmin and the setupadmin server roles to Admin1. On Server1, assign the dbcreator and the securityadmin server roles to Admin1.

Answer: D Section: (none) Explanation/Reference:

QUESTION 7 You have an administrator-approved InfoPath form template that was created by using Microsoft InfoPath Designer 2010. You upload the form template to InfoPath Forms Services. You need to make the form template available to a site collection. What should you do first? A. B. C. D. Create a new content type in the site collection. Create a data connection library in the root site. From the form template's context menu, select Quiesce Form Template. From the form template's context menu, select Activate to a Site Collection.

Answer: D Section: (none) Explanation/Reference:

QUESTION 8 You have a SharePoint Server 2010 server farm that contains the servers shown in the following table. Server name Server role Server1 Web, query, and crawl Server2 Database You create a Web application that uses port 80. The Web application uses Windows authentication and is accessed by using the URL http://server1. You need to ensure that users can access the Web application by using the following URLs: The URL http://server1 and Windows authentication The URL https://server1.contoso.com and anonymous authentication What should you add?

A. B. C. D.

a host header a new authentication provider a new zone an internal URL to the Alternate Access Mappings settings

Answer: C Section: (none) Explanation/Reference:

QUESTION 9 You have two SharePoint Server 2010 server farms named Farm1 and Farm2. You configure Farm1 to consume the Search service application from Farm2. You need to configure Farm1 to consume the User Profile service application from Farm2. What should you do? A. On Farm1, modify the synchronization connections settings of the User Profile service application. B. On Farm2, modify the synchronization connections settings of the User Profile service application. C. Publish the User Profile service application on Farm1 and connect Farm2 to the Farm1 User Profile service application. D. Publish the User Profile service application on Farm2 and connect Farm1 to the User Profile service application of Farm2. Answer: D Section: (none) Explanation/Reference:

QUESTION 10 You have a SharePoint Server 2010 server farm. The server farm contains several Microsoft InfoPath forms. You need to ensure that all the InfoPath forms can use embedded SQL authentication. What should you do from Central Administration? A. B. C. D. Create a new data connection file. Modify the InfoPath Forms Services settings. Modify the InfoPath Forms Services Web service proxy settings. Create a new target application in the Secure Store Service.

Answer: B Section: (none) Explanation/Reference:

QUESTION 11

You have a SharePoint Server 2010 server farm. You have a Web application that is accessed by using the URL https://portal.contoso.com. You need to add a new site collection to the Web application. Users must be able to access the site collection by using the URL https://hrweb.contoso.com. What should you do? A. From Central Administration, extend the Web application. B. From the SharePoint 2010 Management Shell, run the new-spsite cmdlet. C. From Central Administration, create a new site collection, and then add an alternate access mapping. D. From Internet Information Services (IIS) Manager, create a new virtual directory, and then modify the site bindings of the Web application. Answer: B Section: (none) Explanation/Reference:

QUESTION 12 You have a SharePoint Server 2010 server farm. You have a Web application that has two zones named Zone1 and Zone2. Zone1 supports NTLM authentication and Zone2 supports forms-based authentication. You have a dedicated My Sites Web application that is configured to use NTLM authentication. You need to ensure that users who are authenticated by using forms-based authentication can access the My Sites Web application. What should you do? A. B. C. D. Enable Self-Service Site Creation for the Web application. Add the Create Subsites permission to the Contribute permission level. Extend the Web application that hosts My Sites and configure forms-based authentication. Create a new Web Application user policy and assign Full Control to the forms-based authentication users.

Answer: C Section: (none) Explanation/Reference:

QUESTION 13 You have a SharePoint Server 2010 server farm that uses several back-end data sources. The back-end data sources require authentication. You create a Secure Store Service application. The farm does not have a PerformancePoint Services service application. Security requirements in your organization prevent the use of Kerberos delegation. You plan to implement a new PerformancePoint Services service application. You need to ensure that all new PerformancePoint Services dashboards can successfully access the back-end data sources. How should you configure the PerformancePoint Services service application? A. Configure the Unattended Service Account setting. B. Configure an application pool that has access to the back-end data sources. C. Enable the PerformancePoint Services site and site collection features.

D. Enable the Add this service application's proxy to the farm's default proxy list setting. Answer: A Section: (none) Explanation/Reference:

QUESTION 14 You have a SharePoint Server 2010 server farm. You have two Web applications that use the same managed metadata service application. You need to share content types across the two Web applications. What should you do first? A. Create a new Managed Metadata Service application and assign each Web application to its own service application. B. In the Managed Metadata Service application, configure the content type hub setting. C. In the Edit Managed Metadata Service Connection settings, enable Consumes content types from the Content Type Gallery setting. D. In the Edit Managed Metadata Service Connection settings, enable This service application is the default storage location for Keywords setting. Answer: B Section: (none) Explanation/Reference:

QUESTION 15 You have a SharePoint Server 2010 server farm. You discover that SharePoint does not render Microsoft Office Excel workbooks that are stored on a file server named Server1. You need to ensure that SharePoint can render Excel workbooks that are stored on both Server1 and in SharePoint sites. What should you do? A. B. C. D. Add a new trusted file location for Excel Services. Add a new service account for the SharePoint Server Search service. Modify the location settings in the default trusted file location for Excel Services. Modify the workbook properties in the default trusted file location for Excel Services.

Answer: A Section: (none) Explanation/Reference:

QUESTION 16 You have two SharePoint Server 2010 server farms named Farm1 and Farm2. You create a Taxonomy Term Store in Farm1. You need to ensure that Farm2 can access the Taxonomy Term Store in Farm1.

What should you do on Farm1? A. B. C. D. Configure alternate access mappings. Configure content deployment paths and jobs. Publish the Managed Metadata Service application. Publish the Business Data Connectivity service application.

Answer: C Section: (none) Explanation/Reference:

QUESTION 17 You have a SharePoint Server 2010 server farm. You configure a Microsoft Office Excel workbook to connect to a database. All connections to the database must use a Microsoft SQL Server login named Excel1. You publish the workbook to a SharePoint site. You need to ensure that users can access the database via the published workbook. What should you configure? A. B. C. D. alternate access mappings content deployment paths and jobs the Business Data Connectivity service application the Secure Store Service application

Answer: D Section: (none) Explanation/Reference:

QUESTION 18 Your company has a SharePoint Server 2010 server farm. The company receives faxes as TIFF files. The files are stored in a document library. You need to index the content of the faxes and perform optical character recognition. What should you do first? A. B. C. D. Install an iFilter. Create a new search scope. Create a new content source. Start the Document Conversions Launcher Service.

Answer: A Section: (none) Explanation/Reference:

QUESTION 19 You have a SharePoint Server 2010 server farm.

The farm contains the servers configured as shown in the following table. Server name Server role Server1 Database Server2 Web, query Server3 Crawl You need to ensure that users can perform searches if a single server fails. What should you do? A. Add a new SharePoint Server 2010 server to the server farm. Configure the new server as a crawl server. B. Add a new SharePoint Server 2010 server to the server farm. Remove the query component from Server2 and configure the new server as a query server. C. Add two new SharePoint Server 2010 servers to the server farm. Configure one server as a Web server and as a query server. Configure the other server as a crawl server. D. Add a new database server to the server farm and configure database mirroring. Add a new SharePoint Server 2010 server to the server farm and configure the server as a Web server and as a query server. Answer: D Section: (none) Explanation/Reference:

QUESTION 20 You have a SharePoint Server 2010 server farm. The farm contains the servers configured as shown in the following table. Server name Server role Server1 Database Server2 Web, query Server3 Crawl You discover that the average CPU utilization on Server3 is 70 percent. You configure a server named Server4 as a crawl server. You discover that the average CPU utilization on Server3 is still 70 percent. You need to reduce CPU utilization on Server3. What should you do? A. B. C. D. Create a new search scope. Add a new crawl database. Add a new crawl component. Add the query component to Server4.

Answer: C Section: (none) Explanation/Reference:

QUESTION 21 You have a SharePoint Server 2010 server farm. You discover that users search SharePoint Server 2010 for key words and then they search Bing.com for

the same key words. You need to ensure that when users perform searches in SharePoint Server 2010, they receive results from both SharePoint Server 2010 and Bing.com on the same page. What should you do? A. B. C. D. Configure federated search. Install a dedicated services farm. Add Bing.com as a content source. Deploy Microsoft FAST Search Server 2010 for SharePoint.

Answer: A Section: (none) Explanation/Reference:

QUESTION 22 Your company has a main office and a branch office. The main office connects to the branch office by using a WAN link. A file server is located in the branch office. You install a SharePoint Server 2010 server farm in the main office. You need to ensure that content from the branch office file server is available in search results. The solution must minimize the amount of bandwidth used over the WAN link during peak office hours. What should you create and configure? A. B. C. D. a content source a crawl database a crawl rule a search scope

Answer: A Section: (none) Explanation/Reference:

QUESTION 23 You have a SharePoint Server 2010 server farm. A full crawl is scheduled to run every day. You have a Web application that has several document libraries. Each library contains a column named Division. You need to ensure that users can search for all documents that contain a specific value in the Division columns. What should you create? A. B. C. D. a content source a crawler impact rule a managed property a scope

Answer: C Section: (none) Explanation/Reference:

QUESTION 24 You have a SharePoint Server 2010 server farm. You need to identify the average time required to load Web pages in a Web application. What should you do? A. From the Site Settings page, click Site Web Analytics reports. B. From the Site Settings page, click Audit Log Reports (View Auditing Reports), and then click Content Viewing. C. From the Central Administration Home page, click Monitoring, and then click View health reports. D. From the Central Administration Home page, click Monitoring, and then click Review problems and solutions. Answer: C Section: (none) Explanation/Reference:

QUESTION 25 You have a SharePoint Server 2010 server farm. You need to move the farm's logging database to a different database server. What should you do? A. Run the set-spusageapplication cmdlet. B. Run stsadm.exe and specify the addpath operation. C. From the Diagnostic Logging page in Central Administration, modify the Trace Log settings. D. From the Configure usage and health data collection page in Central Administration, modify the usage data collection settings. Answer: A Section: (none) Explanation/Reference:

QUESTION 26 You have a SharePoint Server 2010 server farm. From the Health Analyzer list, you discover the following message in the Availability category: "Database has large amounts of unused space." You need to reduce the amount of unused space in the database. Which tool should you use? A. B. C. D. Central Administration Microsoft SQL Server Management Studio psconfig.exe stsadm.exe

Answer: B Section: (none) Explanation/Reference:

QUESTION 27 You have a SharePoint Server 2010 server farm. You have two Web applications named WebApp1 and WebApp2. WebApp2 contains a document library named Archive. You need to ensure that users can send documents from all of the document libraries in WebApp1 to the Archive document library. What should you do? A. B. C. D. Activate the Content Organizer feature in the root site collection of WebApp1. From Central Administration, modify the General Settings for WebApp1. From Central Administration, modify the Configure Send To Connections settings. From the Document Library settings of Archive, set the Custom Send To Destination values.

Answer: C Section: (none) Explanation/Reference:

QUESTION 28 You have a SharePoint Server 2010 server farm. You need to ensure that users can send e-mail messages to document libraries. What should you do? A. B. C. D. From Central Administration, configure the incoming e-mail settings. From Central Administration, configure the Web application outgoing e-mail settings. From Document Library Settings, modify the Custom Send To Destination value. From Site Settings, activate the E-mail Integration with Content Organizer feature.

Answer: A Section: (none) Explanation/Reference:

QUESTION 29 You have a SharePoint Server 2010 server farm. You need to modify the frequency of immediate alerts for a Web application. What should you configure? A. B. C. D. the outgoing e-mail settings of the Web application the properties of the Windows SharePoint Services Timer V4 service the Resource Throttling settings of the Web application the timer job definitions

Answer: D Section: (none) Explanation/Reference:

QUESTION 30 You have a SharePoint Server 2010 server farm that contains two Web servers named Server1 and Server2 and a database server named Server3. Server2 fails and cannot be restored from backup. You need to add a new Web server named Server2 to the server farm. What should you do first? A. B. C. D. From Central Administration, remove Server2 from the farm. From Central Administration, configure the backup settings. At the command prompt, run stsadm.exe and specify the deleteadminvs operation. At the command prompt, run psconfig.exe and specify the -cmd parameter.

Answer: A Section: (none) Explanation/Reference:

QUESTION 31 You have a SharePoint Server 2010 server farm. You have an Active Directory user account named Apps that is used for a large number of application pools. You need to change the password of Apps every 30 days. You must achieve this goal while using the minimum amount of administrative effort. What should you do? A. B. C. D. Run stsadm.exe and specify the setapppassword operation. Run stsadm.exe and specify the updatefarmcredentials operation. From Central Administration, modify the managed accounts settings. From Central Administration, add Apps to the Delegated Administrators group.

Answer: C Section: (none) Explanation/Reference:

QUESTION 32 You have a SharePoint Server 2010 server farm. You create a new page. You need to prevent site members from modifying the page. You must achieve this goal without changing the permissions currently assigned to other pages. What should you do first?

A. B. C. D.

Edit the page properties. Modify the site permissions. Stop inheriting permissions on the page. Publish a minor version of the page.

Answer: C Section: (none) Explanation/Reference:

QUESTION 33 You have a SharePoint Server 2010 server farm. You need to configure the security of a site to meet the following requirements: Users in a SharePoint group named Group1 must be able to make changes to the content in the site. All other users must only be able to view the content in the site. The permissions assigned to all users and groups must be minimized. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. B. C. D. Add all users to the site's Visitors group. Add all users to the site's Members group. Assign the Design permissions to Group1. Assign the Contribute permissions to Group1.

Answer: AD Section: (none) Explanation/Reference:

QUESTION 34 You have a SharePoint Server 2010 server farm. You create a new site named Site1. You create a new SharePoint group named Group1. You need to configure the permissions of Site1 to meet the following requirements: Allow the members of Group1 to add items. Prevent the members of Group1 from deleting items. What should you do? A. B. C. D. Assign the Contribute permission level to Group1. Assign the View Only permission level to the Site1 Members group. Add a new permission level and assign the new permission level to Group1. Add a new authentication provider and assign the Manage Hierarchy permission level to Group1.

Answer: C Section: (none) Explanation/Reference:

QUESTION 35 You have a SharePoint Server 2010 server farm. You configure a User Profile service application. You need to ensure a group named Group1 can manage user profiles. What should you do? A. B. C. D. Run the set-acl cmdlet. Run the set-spuser cmdlet. Modify the administrators of the User Profiles Service application. From Microsoft SQL Server Management Studio, modify the permissions of the profile database.

Answer: C Section: (none) Explanation/Reference:

QUESTION 36 You have a SharePoint Server 2010 server farm. You create a new site named Site1. You create a new SharePoint group named Group1. You need to ensure that the members of Group1 can modify the Site permissions of Site1. The solution must minimize the number of permissions assigned to Group1. What should you do? A. B. C. D. Assign the Design permission level to Group1. Assign the Full Control permission level to Group1. Modify the Primary Site Collection Administrator settings. Modify the Secondary Site Collection Administrator settings.

Answer: B Section: (none) Explanation/Reference:

QUESTION 37 You have a SharePoint Server 2010 server farm. You have a publishing site that is accessed anonymously. You need to disable anonymous access to the AllItems.aspx and EditForm.aspx pages. Anonymous access to other pages in the site must be enabled. What should you do? A. B. C. D. Activate the ViewFormPagesLockDown feature. Deactivate the SharePoint Server Publishing Infrastructure feature. From Central Administration, modify the authentication provider. From Central Administration, modify the permission policy for the Web application.

Answer: A Section: (none) Explanation/Reference:

QUESTION 38 You have a SharePoint Server 2010 server farm. You populate the department attribute of all user accounts in Active Directory. You have a Web Part page that contains a Web Part named SalesWP. You need to ensure that SalesWP only appears on the Web Part page for users in the Sales department. What should you do first? A. B. C. D. From Central Administration, create a new user policy. From Central Administration, create a new permission policy. From User Profile service application, create a new audience. From User Profile service application, create a new organization profile.

Answer: C Section: (none) Explanation/Reference:

QUESTION 39 You have a SharePoint Server 2010 server farm. You have a site named Site1 that has a document library named DocLib1. You need to configure the security for DocLib1 to meet the following requirements: Allow users to add items. Allow users to modify items. Allow users to approve items. Prevent users from deleting items. What should you do? A. B. C. D. Create a new user policy. Add the users to a new SharePoint group. Assign a new permission level to the users. Create a new information management policy.

Answer: C Section: (none) Explanation/Reference:

QUESTION 40 You have a SharePoint Server 2010 server farm that has a Web application named WebApp. WebApp contains a site collection that is accessed by using the URL http://app.contoso.com. You configure anonymous access for WebApp, but users are unable to log on anonymously. You need to allow anonymous access to http://app.contoso.com. What should you do? A. B. C. D. From Site Settings, configure the Site Permissions. From Site Settings, configure the Portal Site Connection. From Central Administration, configure the Permission Policy. From Central Administration, configure the Authentication Providers.

Answer: A Section: (none) Explanation/Reference:

QUESTION 41 You have a SharePoint Server 2010 server farm. You have a Web application. The zones in the Web application are configured as shown in the following table. Zone URL Default zone http://app.contoso.com Extranet zone https://app-ext.contoso.com Both zones use Windows authentication. You need to configure the Extranet zone to use basic authentication. What should you do from Central Administration? A. B. C. D. Configure the site permissions. Modify the policy for the Web application. Configure the user permissions for the Web application. Configure the authentication providers for the Web application.

Answer: D Section: (none) Explanation/Reference:

QUESTION 42 You have a SharePoint Server 2010 Web application named Portal. Portal is configured to use NTLM authentication. From Central Administration, you configure Portal to use Kerberos authentication. You need to ensure that Kerberos authentication can be used to authenticate Portal. Which tool should you use? A. B. C. D. appcmd.exe psconfig.exe setspn.exe stsadm.exe

Answer: C Section: (none) Explanation/Reference:

QUESTION 43 You have a SharePoint Server 2010 server farm that contains one site collection. You need to prevent users in the Members group from publishing documents from Microsoft Office Word to SharePoint sites. Users in the Members group must be able to upload documents from a Web browser to SharePoint sites.

What should you do? A. B. C. D. From Site Settings, modify the site collection features. From Site Settings, modify the permission level for the Members group. From the Authentication Providers settings, modify the authentication type. From the Authentication Providers settings, disable the Client Integration setting.

Answer: D Section: (none) Explanation/Reference:

QUESTION 44 You have a Web application named WebApp1. WebApp1 contains one site collection. You need to configure the Anonymous Access Restrictions settings for WebApp1. Which settings should you modify before you configure the Anonymous Access Restrictions settings? A. B. C. D. Authentication Providers Permission Policy User Permissions User Policy

Answer: A Section: (none) Explanation/Reference:

QUESTION 45 You have a SharePoint Server 2010 server farm. You have a Microsoft SQL Server 2008 database that contains a table. The table can only be accessed by an Active Directory user account named User1. You need to ensure that the table can be used as an external content type. What should you do? A. B. C. D. Run the add-spclaimtypemapping cmdlet. Create a new Secure Store Service. Create a new Managed Metadata Service application. Modify the permissions for the Business Data Connectivity service application.

Answer: B Section: (none) Explanation/Reference:

QUESTION 46 You have a SharePoint Server 2010 server farm. You create a Web application that supports only forms-based authentication. You need to index the content of the Web application.

What should you do? A. B. C. D. Create a new crawl rule. Change the Search Service account. Change the Authentication Type settings to Web single sign-on. Run the get-spwebapplication cmdlet and specify the UseClaimsAuthentication parameter.

Answer: A Section: (none) Explanation/Reference:

QUESTION 47 You have a SharePoint Server 2010 server farm. You have a Web application. The zones for the Web application are configured as shown in the following table. Zone URL Default http://webapp.contoso.com Extranet http://extranet.contoso.com You need to prevent all users from changing the document library settings for the Extranet zone. You must achieve this goal without affecting access to the Default zone. What should you do? A. Create a custom permission policy that denies the Manage Lists permission. Apply the custom permission policy to the domain users in all zones. B. Create a custom permission policy that denies the Manage Lists permission. Apply the custom permission policy to the domain users in the Extranet zone. C. Create a custom permission policy that denies the Manage Permissions permission. Apply the custom permission policy to the domain users in the Extranet zone. D. Create a custom permission policy that denies the Site Collection Administrator permission. Apply the custom permission policy to the domain users in the Extranet zone. Answer: B Section: (none) Explanation/Reference:

QUESTION 48 You need to ensure that users can upload 100-MB files to a document library. What should you do? A. B. C. D. From Site Settings, configure the site libraries and lists. From Site Settings, configure the site collection policies. From the document library, configure the Library Settings. From Central Administration, modify the Web Application General Settings.

Answer: D Section: (none)

Explanation/Reference:

QUESTION 49 You have a SharePoint Server 2010 server farm. You need to ensure that deleted documents are stored in the SharePoint Recycle Bin for 60 days. What should you do? A. B. C. D. From Central Administration, modify the Quota Templates settings. From Central Administration, modify the Web Application General Settings. From User Profile Service Application settings, modify the My Site settings. From User Profile Service Application settings, modify the User Properties settings.

Answer: B Section: (none) Explanation/Reference:

QUESTION 50 You have a SharePoint Server 2010 server farm. You have two Web applications named App1 and App2. You need to prevent App2 from using the Access Services service application. What should you do? A. B. C. D. Create a permission policy for App2. Modify the General Settings for App2. Modify the Service Connections settings for App2. Modify the permissions for the Access Services service application.

Answer: C Section: (none) Explanation/Reference:

QUESTION 51 You have a SharePoint Server 2010 server farm that contains a Web application named WebApp1. WebApp1 has a single content database. You need to prevent users from modifying the content in WebApp1. Users must be able to view the content in WebApp1. What should you do? A. B. C. D. From Central Administration, change the database status. From Central Administration, modify the Web Application General Settings. From Microsoft SQL Server Management Studio, configure the database to be Read Only. From the SharePoint 2010 Management Shell, run the set-spwebapplication cmdlet.

Answer: C Section: (none)

Explanation/Reference:

QUESTION 52 You have a SharePoint Server 2010 server farm. You have a Web application that contains the following site collections: A site named Corp that has a document library named Docs A site named Records that was created by using the Records Center site template You need to ensure that users can route document sets from Docs to the Drop Off Library in Records. What should you do? A. Create a content organizer rule for the Document Set content type in Corp. B. Create a content organizer rule for the Document Set content type in Records. C. From Central Administration, modify the Configure Send To Connections settings for the Web application. D. From Document Library Settings, set the Custom Send To Destination value to the URL of the Drop Off Library. Answer: C Section: (none) Explanation/Reference:

QUESTION 53 You have a SharePoint Server 2010 server farm. You discover that the online presence information of users is displayed. You need to remove the online presence information. What should you do? A. B. C. D. From Central Administration, modify the User Policy settings. From Central Administration, modify the Web Application General Settings. From User Profile Service Application, modify the User Properties settings. From User Profile Service Application, modify the Publish Links to Office Client Applications settings.

Answer: B Section: (none) Explanation/Reference:

QUESTION 54 You have a SharePoint Server 2010 server farm. You need to prevent users from creating site collections. What should you modify? A. the User Profile Service Application settings B. the service account for the My Sites Web application C. the Self-Service Site Collection Management settings

D. the permissions of the content database that hosts My Sites Answer: C Section: (none) Explanation/Reference:

QUESTION 55 You have a SharePoint Server 2010 server farm. You enable My Sites. You need to ensure that users receive an e-mail message when the size of their personal site reaches 100 MB. Which settings should you modify? A. B. C. D. Personal Site Quota Template Site Collection Quotas and Locks Site Use Confirmation and Deletion User Profile Service Application

Answer: A Section: (none) Explanation/Reference:

QUESTION 56 You have a SharePoint Server 2010 server farm. You plan to host multiple site collections in a single Web application. You need to prevent user profiles from being shared between the site collections. What should you do? A. B. C. D. Enable multi-tenant support. Create multiple profile databases. Create multiple content databases. Configure the Secure Store Service application.

Answer: A Section: (none) Explanation/Reference:

QUESTION 57 You have a SharePoint Server 2010 server farm. You attempt to enable the SharePoint Server Publishing feature on a site and receive the following error message: "The feature you are trying to activate is from the scope Web. It has a dependency on another feature in the Site scope which is a hidden feature." You need to ensure that you can enable the SharePoint Server Publishing feature. What should you do first?

A. B. C. D.

Run the install-spfeature cmdlet. Run stsadm.exe and specify the installfeature operation. From Site Settings, configure Search Scopes. From Site Settings, configure Site Collection Features.

Answer: D Section: (none) Explanation/Reference:

QUESTION 58 You have a SharePoint Server 2010 server farm that contains a publishing site. You need to ensure that when users click New Page from the Site Actions menu, the (Article Page) Image on Left template is used by default. What should you do? A. B. C. D. From Site Settings, modify the Site Master Page Settings. From Site Settings, modify the Page layouts and site templates settings. From the Master Page Gallery, change the new button order. From the Master Page Gallery, change the default content type.

Answer: B Section: (none) Explanation/Reference:

QUESTION 59 You have a SharePoint Server 2010 server farm. You need to ensure that a user named User1 can manage all of the sites in a site collection. You must achieve this goal while preventing User1 from managing the SharePoint Recycle Bin. What should you do? A. B. C. D. From Site Settings, configure the site permissions. From Site Settings, configure the site collection administrators. From Central Administration, configure the site collection administrators. From Central Administration, configure the Web Application General Settings.

Answer: A Section: (none) Explanation/Reference:

QUESTION 60 You have a SharePoint Server 2010 server farm. You have a Web application that has one publishing site collection. Users report that they are unable to create team sites by using a Web browser. You need to ensure that users can create team sites. What should you do from Site Settings?

A. B. C. D.

Configure the Reset to site definition settings. Activate the Team Collaboration Lists feature. Modify the Page layouts and site templates settings. Activate the SharePoint Server Enterprise Site features.

Answer: C Section: (none) Explanation/Reference:

QUESTION 61 You have a SharePoint Server 2010 server farm. You have a Web application named WebApp1. WebApp1 is a heavily-accessed publishing site and is accessed anonymously from the Internet. You need to ensure that site pages load as quickly as possible for anonymous users. What should you do? A. B. C. D. From Site Settings, modify the Content Organizer Settings. From Site Settings, modify the Site collection output cache settings. From Resource Throttling, select the Daily Time Window for Large Queries option. From Resource Throttling, turn on the HTTP Request Monitoring and Throttling option.

Answer: B Section: (none) Explanation/Reference:

QUESTION 62 You have a SharePoint Server 2010 server farm. You have a Web Part that is packaged as a SharePoint solution. You need to prevent a memory leak in the Web Part from causing excessive memory use at the farm level. What should you do? A. B. C. D. Deploy the SharePoint solution to the farm solution gallery. Deploy the SharePoint solution to a site collection solution gallery. In the web.config file, modify the trust level to Full. In the web.config file, modify the trust level to WSS_Medium.

Answer: B Section: (none) Explanation/Reference:

QUESTION 63 You have a SharePoint Server 2010 server farm. A SharePoint user solution is uploaded to several site collections. You need to prevent the SharePoint user solution from running in one specific site collection. What should you do?

A. B. C. D.

Create a Web Application permission policy. Modify the solution gallery of the site. Modify the User Solution Management settings of the farm. Modify the Farm Solution Management settings of the farm.

Answer: B Section: (none) Explanation/Reference:

QUESTION 64 You have a SharePoint Server 2010 server farm. You deploy several SharePoint user solutions to a site collection and estimate that the resource usage of the SharePoint solutions is 600 points. You discover that all of the SharePoint solutions stop working simultaneously. The next day, the SharePoint solutions automatically start working again. You need to prevent this issue from reoccurring. What should you do? A. From the Quota Templates settings, modify the Storage Limit Values. B. From the command prompt, run iisreset.exe on all Web servers. C. From the Site Collection Quotas and Locks settings, modify the User Solution Resource Quota value. D. From the User Solution Management settings, enable the All user code runs on the same machine as a request setting. Answer: C Section: (none) Explanation/Reference:

QUESTION 65 You have a SharePoint Server 2010 server farm. You have a SharePoint solution named Solution1. Solution1 contains a feature named Feature1. Feature1 installs a custom Web Part to the Global Assembly Cache. You deactivate Feature1 and retract Solution1 from the server farm. The custom Web Part still appears on the list of Web Parts that users can add to Web Part pages. You need to prevent the custom Web Part from appearing on the list of Web Parts that users can add to Web Part pages. What should you do? A. B. C. D. Modify the default.master master page. Run gacutil.exe and specify the uninstall parameter. Run stsadm.exe and specify the deletesolution operation. Delete the Web Part descriptor from the Web Part Gallery.

Answer: D Section: (none) Explanation/Reference:

QUESTION 66 You have a SharePoint Server 2010 server farm. The server farm has two Web servers named Server1 and Server2. Several custom SharePoint user solutions are deployed in the farm You need to ensure that all SharePoint user solutions execute on Server1 only. What should you do? A. B. C. D. Modify the Farm Solutions settings. Modify the User Solutions settings. Stop the Web Analytics Processing Service on Server2. Stop the Microsoft SharePoint Foundation Sandboxed Code Service on Server2.

Answer: D Section: (none) Explanation/Reference:

QUESTION 67 You have a SharePoint Server 2010 server farm. You have a SharePoint solution installed at the farm level. You need to deploy the SharePoint solution to a Web application at 02:00. What should you do? A. B. C. D. From Site Settings, modify the Solutions Gallery settings. From Central Administration, modify the Solution Management settings. From Central Administration, modify the Web Application General Settings. From Central Administration, modify the User Solution Management settings.

Answer: B Section: (none) Explanation/Reference:

QUESTION 68 You have a SharePoint Server 2010 server farm. You need to add a SharePoint solution at the farm level. Which cmdlet should you use? A. B. C. D. add-spsolution add-spusersolution install-spsolution install-spusersolution

Answer: A Section: (none) Explanation/Reference:

QUESTION 69 You have a SharePoint Server 2010 site. You need to back up a list from the site to meet the following requirements: Back up the permissions. Back up the version history information. Minimize the time to perform the backup. What should you do? A. B. C. D. From the command prompt, run stsadm.exe and specify the backup operation. From the List settings, select Save Document Library as Template. From the List, select Library Tools, and then select Export to Excel. From Central Administration, open the Site or List Export page and start an export.

Answer: D Section: (none) Explanation/Reference:

QUESTION 70 You have a SharePoint Server 2010 server farm. You create two site collections named Site1 and Site2 that use the same template. You update the content and several Web Part pages in Site1. You need to ensure that all changes in Site1 are automatically copied to Site2 every night. What should you do? A. B. C. D. Create a content deployment path. Configure the Data Retrieval Service. Configure the default backup and restore settings. Modify the content database settings.

Answer: A Section: (none) Explanation/Reference:

QUESTION 71 You have a SharePoint Server 2010 server farm. You need to back up a site collection by using a SQL database snapshot. What should you do? A. B. C. D. From Central Administration, perform a granular backup. From the command prompt, run the stsadm.exe command. From Central Administration, perform a component-level backup. From the SharePoint 2010 Management Shell, run the backup-spsite cmdlet.

Answer: D Section: (none)

Explanation/Reference:

QUESTION 72 You have a SharePoint Server 2010 server farm. You need to ensure that you can restore the contents of a list without restoring an entire site. You want to achieve this goal while using the minimum amount of administrative effort. What should you do? A. B. C. D. From Central Administration, export the list. From Central Administration, perform a full backup. From Microsoft SQL Server Management Studio, configure differential backups. From the SharePoint 2010 Management Shell, run the backup-spfarm cmdlet.

Answer: A Section: (none) Explanation/Reference:

QUESTION 73 You have a SharePoint Server 2010 server farm that has several large content databases. You perform a full farm backup every day. You discover that the farm backup takes more than six hours to complete. You need to reduce the amount of time it takes to fully back up the farm. What should you do? A. B. C. D. Modify the Backup/Restore timer job definition. Configure Web Application Resource Throttling for Central Administration. From the Data Retrieval Service settings, increase the Data Source time-out setting. From the Default Backup and Restore Settings, modify the number of backup threads.

Answer: D Section: (none) Explanation/Reference:

QUESTION 74 You have a SharePoint Server 2010 server farm. You use stsadm.exe to back up the farm every day. You need to restore a Web application and all of its associated content. What should you do? A. B. C. D. From Windows Backup, perform a System State Restore. From Central Administration, run the Restore from backup wizard. From Microsoft SQL Server Management Studio, restore the content databases. From Windows PowerShell, run the restore-spconfigurationdatabase cmdlet.

Answer: B

Section: (none) Explanation/Reference:

QUESTION 75 You have a SharePoint Server 2010 server farm. You need to view the contents of an unattached content database. You want to achieve this goal while using the minimum amount of administrative effort. Which tool should you use? A. B. C. D. Central Administration Microsoft SQL Server Management Studio spmetal.exe stscfg.exe

Answer: A Section: (none) Explanation/Reference:

QUESTION 76 You have a SharePoint Server 2010 server farm. You need to automatically back up the server farm every day. What should you do? A. B. C. D. From Central Administration, configure the backup settings. From Central Administration, configure the Backup/Restore timer job definition. From Windows Task Scheduler, create a task that runs stsadm.exe. From Windows Task Scheduler, create a task that runs the set-sptimerjob cmdlet.

Answer: C Section: (none) Explanation/Reference:

QUESTION 77 You have a SharePoint Server 2010 server farm. You need to back up the Excel Services service application. The solution must minimize the size of the backup. What should you do? A. B. C. D. From Central Administration, click Perform a backup. From Central Administration, click Perform a site collection backup. From the command prompt, run stsadm.exe and specify the export operation. From the SharePoint 2010 Management Shell, run the backup-spsite cmdlet.

Answer: A Section: (none)

Explanation/Reference:

QUESTION 78 You have a SharePoint Server 2010 server farm. You need to back up the contents of a custom list every day. The solution must minimize the size of the backup. What should you do? A. B. C. D. Create a scheduled task that runs the export-spweb cmdlet. Create a scheduled task that runs the backup-spsite cmdlet. From Central Administration, click Perform a backup. From Central Administration, click Perform a site collection backup.

Answer: A Section: (none) Explanation/Reference:

QUESTION 79 You have a SharePoint Server 2010 server farm. You discover that the SharePoint trace logs use a large amount of disk space. You need to set the maximum number of days that the log files can be stored and restrict the amount of storage space available to store the log files. What should you do? A. B. C. D. Stop the Application Registry Service for the farm. Modify the Site Collection Quotas and Locks settings. From the Diagnostic Logging settings, modify the Trace Log settings. From the Diagnostic Logging settings, modify the Enable Event Log Flood Protection setting.

Answer: C Section: (none) Explanation/Reference:

QUESTION 80 You have a SharePoint Server 2010 server farm. You need to change the location of the usage data collection log files. What should you do? A. B. C. D. From Central Administration, configure Diagnostic Logging. From Central Administration, configure usage and health data collection. From the SharePoint 2010 Management Shell, run the new-spusagelogfile cmdlet. From the SharePoint 2010 Management Shell, run the set-spdiagnosticconfig cmdlet.

Answer: B Section: (none) Explanation/Reference:

QUESTION 81 You have a SharePoint Server 2010 server farm. You need to identify whether any service applications in the server farm are using the farm service account. What should you review? A. B. C. D. the Health Analyzer reports the Internet Information Services (IIS) logs the SharePoint trace logs the Web Analytics reports

Answer: A Section: (none) Explanation/Reference:

QUESTION 82 You have a SharePoint Server 2010 server farm that contains a Web application named WebApp1 and a site collection named Site1. Users deploy several SharePoint user solutions to Site1. You need to view the average resource usage of the SharePoint user solutions for the last 14 days. What should you view? A. B. C. D. the General Settings of WebApp1 the Site Web Analytics reports of Site1 the content of the solution gallery of Site1 the health reports of WebApp1 from Central Administration

Answer: C Section: (none) Explanation/Reference:

QUESTION 83 You have a SharePoint Server 2010 server farm. You need to enable trace logging for the Search service. What should you configure? A. B. C. D. diagnostic logging the Health Analyzer rule definitions the Search service application usage and health data collection

Answer: A Section: (none) Explanation/Reference:

QUESTION 84 You have a SharePoint Server 2010 server farm. You need to ensure that users can create a maximum of 300 alerts for a Web application. What should you do? A. B. C. D. Configure Resource Throttling. Configure Send To Connections. Specify a Web Application user policy. Configure the Web Application General Settings.

Answer: D Section: (none) Explanation/Reference:

QUESTION 85 You deploy a SharePoint Server 2010 server farm. You need to view the query latency of all searches performed on the SharePoint sites. Which reports should you view? A. B. C. D. Administrative Health Analyzer Information Management Policy Usage Web Analytics

Answer: A Section: (none) Explanation/Reference:

QUESTION 86 You have a SharePoint Server 2010 server farm. You need to log all of the changes made to a site's content types and columns. What should you do? A. B. C. D. From Site Settings, modify the Audit settings. From Site Settings, modify the Site Web Analytics Reports settings. From Site Settings, modify the Site Collection Web Analytics Reports settings. From Central Administration, modify the Information Management Policy Usage Report settings.

Answer: A Section: (none)

Explanation/Reference:

QUESTION 87 You have a SharePoint Server 2010 server farm that contains a Microsoft SQL Server 2008 server named Server1 and a SharePoint Server 2010 server named Server2. A database administrator installs and configures Remote BLOB Storage (RBS) on Server1. You need to ensure that all video files uploaded to the server farm that are more than 1 GB are stored in the file system of Server1. What should you do? A. B. C. D. Install and activate RBS on Server2. Create an ODBC data source on Server2. Modify the Data Retrieval Services settings for all Web applications. Modify the Site Collection Quotas and Locks settings for all site collections.

Answer: A Section: (none) Explanation/Reference:

QUESTION 88 You have a SharePoint Server 2010 server farm that contains a Web server and a database server. You have a SharePoint Web site that contains large multimedia files. The multimedia files are accessed frequently by a large number of users. You need to minimize the amount of traffic between the Web server and the database server. What should you do? A. From the web.config file of the Web site, configure the BLOB cache settings. B. From Central Administration, modify the Web Application General Settings. C. From Site Collection Administration, enable the Publishing Infrastructure and configure the object cache settings. D. From Site Collection Administration, enable the Publishing Infrastructure and configure the output cache settings. Answer: A Section: (none) Explanation/Reference:

QUESTION 89 You have a SharePoint Server 2010 server farm. You modify the Web application default settings to prevent views from displaying more than 2,000 items. You discover a custom SharePoint user solution that contains a custom Web Part display with more than 2,000 items. You need to prevent all Web Parts from displaying more than 2,000 items. What should you do? A. From Library Settings, modify the Validation settings.

B. From Library Settings, modify the Per-location view settings. C. From Central Administration, modify the Resource Throttling settings. D. From Central Administration, modify the User Solution Management settings. Answer: C Section: (none) Explanation/Reference:

QUESTION 90 You have a SharePoint Server 2010 server farm that contains two Web servers named Server1 and Server2. You discover that the average CPU utilization on Server1 is 99 percent and the average CPU utilization on Server2 is 1 percent. You need to decrease CPU utilization on Server1. What should you do? A. B. C. D. Create an additional application pool. Create an extended Web application zone. Configure Windows Network Load Balancing. Configure the maximum number of worker processes.

Answer: C Section: (none) Explanation/Reference:

QUESTION 91 You have a SharePoint Server 2010 server farm. You need to prevent lists from displaying more than 2,000 items at a time. What should you do? A. B. C. D. From Library Settings, modify the Validation settings. From Library Settings, modify the Per-location view settings. From Central Administration, modify the Quota Templates settings. From Central Administration, modify the Resource Throttling settings.

Answer: D Section: (none) Explanation/Reference:

QUESTION 92 You have a SharePoint Server 2010 server farm. You have two content databases named Content_DB1 and Content_DB2. You need to move a site collection from Content_DB1 to Content_DB2. What should you do?

A. B. C. D.

From the SharePoint 2010 Management Shell, run the move-spsite cmdlet. From Central Administration, modify the Manage Content Database settings. From the Site Settings of the site collection, modify the site content and structure. From the command prompt, run stsadm.exe and specify the preparetomove operation.

Answer: A Section: (none) Explanation/Reference:

QUESTION 93 You have a SharePoint Server 2010 server farm. You need to assign a cache profile for authenticated users. What should you do? A. B. C. D. From Central Administration, create a new user policy. From Site Settings, modify the Site Collection object cache. From Site Settings, modify the Site Collection output cache. From Site Settings, modify the Site Collection cache profiles.

Answer: C Section: (none) Explanation/Reference:

QUESTION 94 How many years of experience do you have with Microsoft SharePoint 2010? I have not done this yet. A. B. C. D. E. Less than 6 months 6 months-1 year 1-2 years 2-3 years More than 3 years

Answer: A Section: (none) Explanation/Reference:

QUESTION 95 How many years of experience do you have with any version of Microsoft SharePoint? I have not done this yet. A. B. C. D. Less than 6 months 6 months-1 year 1-2 years 2-3 years

E. More than 3 years Answer: A Section: (none) Explanation/Reference:

QUESTION 96 Rate your level of proficiency with installing and configuring a SharePoint environment, including deploying new installations and upgrades; and configuring farms, service applications, indexing, and search. A. B. C. D. E. Very high High Moderate Low Very low

Answer: A Section: (none) Explanation/Reference:

QUESTION 97 Rate your level of proficiency with managing a SharePoint environment, including managing operational settings, accounts, user roles, and authentication providers. A. B. C. D. E. Very high High Moderate Low Very low

Answer: A Section: (none) Explanation/Reference:

QUESTION 98 Rate your level of proficiency with deploying and managing applications, including managing Web applications, site collections, and SharePoint solutions. A. B. C. D. E. Very high High Moderate Low Very low

Answer: A Section: (none) Explanation/Reference:

QUESTION 99 Rate your level of proficiency with maintaining a SharePoint environment, including backing up and restoring, monitoring and analyzing, and optimizing the performance of a SharePoint environment. A. B. C. D. E. Very high High Moderate Low Very low

Answer: A Section: (none) Explanation/Reference:

QUESTION 100 You have a SharePoint Server 2010 server farm that contains a web application named WebApp1 and a site collection named Site1.Users deploy several SharePoint user solutions to Site1.You need to view tho average resource usage of the SharePoint user solutions for the last 14 days.What should you view? A. B. C. D. tha General Settings of WebApp1 the Site Web Analytics reports of Site1 the content of tho solution gallery of Site1 the health reports of WebApp1 from Central Administration

Answer: A Section: (none) Explanation/Reference:

QUESTION 101 You have a SharePoint Server 2010 server farm.You need to enable trace logging for the Search service.What should you configure? A. B. C. D. diagnostic logging the Health Analyzer rule definitions the Search service application usage and health data collection

Answer: A Section: (none)

Explanation/Reference:

QUESTION 102 You have a SharePoint Server 2010 server that contains two Web servers named Server1 and Server2.You discover that the average CPU utilization on Server1 is 99 percent and the average CPU utilization on Server2 is 1 percent.You need to decrease CPU utilization on Server1.What should you do? A. B. C. D. Create an additional application pool. Create an extended Web application zone. Configure Windows Network Load Balancing. Configure the maximum number of worker procosses.

Answer: C Section: (none) Explanation/Reference:

QUESTION 103 You have a SharePoint Server 2010 server farm.You modify the Web application default settings to prevent views from displaying more than 2,000 Items.You discover a custom SharePoint user solution that contains a custom Web Part display with more than 2,000 items.You need to prevent all Web Parts from displaying more than 2,000 items. What should you do? A. B. C. D. From Library Settings, modify the Validation Settings. From Library Settings, modify the Per-location view settings. From Central Administration, modify the Resource Throttling settings. From Central Administration, modify the User Solutions Management settings.

Answer: C Section: (none) Explanation/Reference:

QUESTION 104 You have a SharePoint Server 2010 server farm.You create two site collections named Site1 and Site2 that use the same template.You update the content and several Web Part pages in Site1.You need to ensure that all changes in Site1 are automatically copied to Site2 every night.What should you do? A. B. C. D. Create a content deployment path. Configure the Data Retrieval Service. Configure the default backup and restore settings. Modify the content database settings.

Answer: A Section: (none) Explanation/Reference:

QUESTION 105 You have a SharePoint 2010 server farm.You need to ensure that you can restore the contents of a list without restoring an entire site. You want to achieve this goal while using the minimum amount of administrative effort.What should you do? A. B. C. D. From Central Administration, export the list. From Central Administration, perform a full backup. From Microsoft SQL Server Management Studio, configure differential backups. From the SharePoint 2010 Management Shell, run the backup-spfarm cmdlet.

Answer: A Section: (none) Explanation/Reference:

QUESTION 106 You have a SharePoint Server 2010 server farm.You need to change the location of the usage data collection log files.What should you do? A. B. C. D. From Central Administration, configure Diagnostic Logging. From Central Administration, configure usage and health data collection. From the SharePoint 2010 Management Shell, run the new-spusagelogfile cmdlet. From the SharePoint 2010 Management Shell, run the set-spdiagnosticconfig cmdlet.

Answer: A Section: (none) Explanation/Reference:

QUESTION 107 You have a SharePoint Server 2010 site.You need to back up a fist from the site to meet the following requirements: Back up the permissions. Back up the version history information. Minimize the time to perform the backup. What should you do? A. B. C. D. From the command prompt, run stsadm.exe and specify the backup operation. From the List settings, select Save Document Library as Template. From the List, select Library Tools, and then select Export to Excel. From Central Administration, open the Site or List Export page and start an export.

Answer: A Section: (none) Explanation/Reference:

QUESTION 108 You have a SharePoint Server 2010 server farm.You need to back up the Excel Services service application. The solution must minimize the size of the backup. What should you do? A. B. C. D. From Central Administration, click Perform a backup. From Central Administration, click Perform a site collection backup. From the command prompt, run stsadm.exe and specify the export operation. From the SharePoint 2010 Management Shell, run the backup-spslte cmdlet.

Answer: A Section: (none) Explanation/Reference:

QUESTION 109 You have a SharePoint Server 2010 server farm.You need to assign a cache profile for authenticated users.What should you do? A. B. C. D. From Central Administration, create a new user policy From Site Settings, modify the Site Collection object cache. From Site Settings, modify the Site Collection output cache. From Site Settings, modify the Site Collection cache profiles.

Answer: C Section: (none) Explanation/Reference:

QUESTION 110 You have a SharePoint Server 2010 server farm.You have two content databases named Content_DB1 and Content_DB2.You need to move a site collection from Content__DB1 to Content__DB2.What should you do? A. B. C. D. From SharePoint 2010 Management Shell, run the move-spsite cmdlet. From Central Administration, modify the Manage Content Database settings. From the Site Settings of the site collection, modify the site content and structure. From the command prompt, run stsadm.exe and specify the preparetomove operation.

Answer: A Section: (none) Explanation/Reference:

QUESTION 111 You have a SharePoint Server 2010 server farm.You discover that the SharePoint trace logs use a large amount of disk space.You need to set the maximum number of days that the log files can be stored and

restrict the amount of storage space available to store the log files. What should you do? A. B. C. D. Stop tno Application Registry Service for the farm. Modify the Site Collection Quotas and Locks settings. From the Diagnostic Logging settings, modify the Trace Log settings. From the Diagnostic Logging settings, modify the Enable Event Log Flood Protection setting.

Answer: D Section: (none) Explanation/Reference:

QUESTION 112 You have a SharePoint Server 2010 server farm.You need to view the contents of an unattached content database. You want to achieve this goal while using the minimum amount of administrative effort.What tool should you use? A. B. C. D. Central Administration Microsoft SQL Server Management Studio spmetal.exe stscfg.exe

Answer: B Section: (none) Explanation/Reference:

QUESTION 113 You have two SharePoint Server 2010 server farms named Farm1 and Farm2.You configure Farm1 to consume the Search service application from Farm2.You need to configure Farm1 to consume the User Profilo service application from Form2.What should you do? A. On Farm1, modify the synchronization connections settings of the User Profile service application. B. On Farm2, modify the synchronization connections settings of the User Profile service application. C. Publish the User Profile service application on Farm1 and connect Farm2 to the Farm1 User Profile service application. D. Publish the User Profile service application on Farm1 and connect Farm2 to the User Profile service application of Farm2. Answer: D Section: (none) Explanation/Reference:

QUESTION 114 You have a Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2) server farm.You upgrade the server farm to SharePoint server 2010.You open a SharePoint site and discover that you cannot select the Visual Upgrade option.You need to ensure that you can perform a visual upgrade of the SharePoint site.What should you do? A. B. C. D. Run the upgrade-spcontentdatabase cmdtet. Run psconfig.exe and specify the -cmd parameter. Run stsadm.exe and specify the setpropertcy operation. Run stsadm.exe and specify the preupgradecheck operation.

Answer: D Section: (none) Explanation/Reference:

QUESTION 115 Your company has a main office and a branch office. The main office connects to the branch office by using a WAN link. A file server is located in the branch office.You install a SharePoint Server 2010 server farm in the main office.You need to ensure that content from the branch office file server is available in search results. The solution must minimize the amount of bandwidth used over the WAN link during peak office hours.What should you create and configure? A. B. C. D. a content source a crawl database a crawl rule a search scope

Answer: A Section: (none) Explanation/Reference:

QUESTION 116 You have a SharePoint Server 2010 server farm.The server farm contains several Microsoft InfoPath forms.You need to ensure that all the InfoPath forms can use embedded SQL authentication.What should you do from Centra! Administration? A. B. C. D. Create a new data connection file. Modify the InfoPath Forms Services settings. Modify the InfoPath Forms Services Web service proxy settings. Create a new target application in the Secure Store Service.

Answer: B Section: (none) Explanation/Reference:

QUESTION 117 You have a SharePoint Server 2010 server farm.You discover that users search SharePoint Server 2010 for key words and then they search Bing.com for the same key words.You need to ensure that when users perform searches in SharePoint Server 2010, they receive results from both SharePoint Server 2010 and Bing.com on the same page. What should you do? A. B. C. D. Configure federated search. Install a dedicated services farm. Add Bing.com as a content source. Deploy Microsoft FAST Search Server 2010 for SharePoint.

Answer: A Section: (none) Explanation/Reference:

QUESTION 118 You have a SharePoint Server 20l0 server farm.You have two Web applications that use the same managed metadata service application.You need to share content types across the two Web applications.What should you do first? A. Create a new Managed Metadata Service application and assign each Web application to its own service application. B. In the Managed Metadata Service application, configure the content type hub setting. C. In the edit Managed Metadata Service Connection Settings, enable Consumes content types from the Content Type Gallery setting. D. In the edit Managed Metadata Service Connection Settings, enable This service application is the default storage location for Keywords setting. Answer: B Section: (none) Explanation/Reference:

QUESTION 119 You have an administrator-approved InfoPath form template that was created by using Microsoft InfoPath Designer 2010.You upload the form template to InfoPath Forms Services. You need to make the form template available to a site collection. What should you do first? A. B. C. D. Create a new content type in the site collection. Create a data connection library in the root site. From the form template's context menu, select Quiesce Form Template. From the form template's context menu, select Activate to a Site Collection.

Answer: D Section: (none) Explanation/Reference:

QUESTION 120 You have a SharePoint Server 2010 server farm.You discover that SharePoint does not render Microsoft Office Excel workbooks that are stored on a file server named Server1.You need to ensure that SharePoint can render Excel workbooks that araestored on both Server1 and in SharePoint sites.What should you do? A. B. C. D. Add a new trusted file location for Excel Services. Add a new service account for the SharePoint Server Search service. Modify the location settings In the default trusted file location for Excel Services. Modify the workbook properties in the default trusted file location for Excel Services.

Answer: A Section: (none) Explanation/Reference:

QUESTION 121 You have a server that runs Windows Server 2008.You install the English version of SharePoint Server 2010 on the server.You need to ensure that administrators can use Central Administration in French and English.What should you do first? A. B. C. D. Modify the Language settings from Central Administration. Install the French version of SharePoint Server 2010. Install the French language pack for SharePoint Server 2010. Install the French Windows Server 2008 Multilingual User Interface (MUI) Language Pack.

Answer: C Section: (none) Explanation/Reference:

QUESTION 122 You have a Mcfoaoft Office SharoPoint Server 2007 Service Pack 2 (SP2) server farm.You plan to upgrade to SharePoint Server 2010.You need to Identify all potential upgrade issues bofore you install SharePoint Server 2010.What should you do? A. B. C. D. Run stsadm.exe -o preupgradecheck. Install Windows PowerShell 2.0 and run the test-spcontentdatabase cmdlet. Run psconfig.exe -cmd upgrade from the SharePoint Server 2010 installation files. Download and rin the Microsoft Best Practices Analyzer for Windows SharePoint Services 3.0 and the 2007 Microsoft Office System.

Answer: B Section: (none) Explanation/Reference:

QUESTION 123 You have a SharePoint Server 2010 server farm.You have a Web application that has two zones names Zone1 and Zone2. Zone1 supports NTLM authentication and Zone2 supports forms-based authentication.You have a dedicated My Sites Web application that is configured to use NTLM authentication.You need to ensure that users who are authenticated by using forms-based authentication can access My Sites Web application. What should you do? A. B. C. D. Enable Self-Service Site Creation for the Web application. Add the Create Subsites permission to the Contribute permission level. Extend the Web application that hosts My Sites and configure forms-based authentication. Create a new Web Application user policy and assign Full Control to the forms-based authentication users.

Answer: C Section: (none) Explanation/Reference:

QUESTION 124 Your company has a SharePoint Server 2010 server farm.The company receives faxes as TIFF files. The files are stored in a document library.You need to index the content of the faxes and perform optical character recognition. What should you do first? A. B. C. D. Install an iFilter. Create a new search scope. Create a new content source. Start the Document Conversions Launcher Service.

Answer: A Section: (none) Explanation/Reference:

QUESTION 125 You have a SharePoint Server 2010 server farm.You have a Web application named WebApp1. WebApp1 is a heavily- accessed publishing site and is accessed anonymously from the Internet.You need to ensure that site pages load as quickly as possible for anonymous users.What should you do? A. B. C. D. From Site Settings, modify the Content Organizer Settings. From Site Settings, modify the Site collection output cache settings. From Resource Throttling, select the Daily Time Window for Large Queries option. From Resource Throttling, turn on the HTTP Request Monitoring and Throttling option.

Answer: B Section: (none)

Explanation/Reference:

QUESTION 126 You havo a SharePoint Server 2010 server farm.You havo a Web Part that is packaged as a SharePoint solution.You need to prevent a memory leak in the Web Part from causing excessive memory use at the farm level. What should you do? A. B. C. D. Deploy the SharePoint solution to the farm solution gallery. Deploy the SharePoint solution to a site collection solution gallery. In the web.config file, modify the trust level to Full. In the web.config file, modify the trust level to WSS_Medium.

Answer: A Section: (none) Explanation/Reference:

QUESTION 127 You have a SharePoint Server 2010 server farm.You have a SharePoint solution installed at the farm level.You need to deploy the SharePoint solution to a Web application at 02:00. What should you do? A. B. C. D. From Site Settings, modify the Solutions Gallery settings. From Central Administration, modify the Solution Management settings. From Central Administration, modify the Web Application General Settings. From Central Administration, modify the User Solution Management settings.

Answer: B Section: (none) Explanation/Reference:

QUESTION 128 You have a SharePoint Server 2010 server farm.The server farm has two Web servers named Server1 and Server2.Server1 custom SharePoint user solutions are deployed in the farm.You need to ensure that all SharePoint user solutions execute on Server1 only. What should you do? A. B. C. D. Modify the Farm Solutions settings. Modify the User Solutions settings. Stop the Web Analytics Processing Service on Server2. Stop the Microsoft SharePoint Foundation Sandboxed Code Service on Server2.

Answer: D Section: (none) Explanation/Reference:

QUESTION 129 You have a SharePoint Server 2010 server farm.You discover that the online presence information of users is displayed.You need to remove the online presence information. What should you do? A. B. C. D. From Central Administration, modify the User Policy settings. From Central Administration, modify the Web Application General Settings. From User Profile Service Application, modify the User Properties settings. From User Profile Service Application, modify the Publish Links to Office Client Applications settings.

Answer: B Section: (none) Explanation/Reference:

QUESTION 130 You have a SharePoint Server 2010 server farm that contains a Web application named WebApp1.WebApp1 has a single contont database.You need to prevent users from modifying the contont in WebApp1. Users must be able to view the contont in WebApp1. What should you do? A. B. C. D. From Central Administration, change the database status. From Central Administration, modify the Web Application General Settings. From Microsoft SQL Server Management Studio, configure the database to be Road Only. From the SharePoint 2010 Management Shell, run the set-spwebapplication cmdlet.

Answer: C Section: (none) Explanation/Reference:

QUESTION 131 You have a SharePoint Server 2010 server farm.You plan to host multiple site collections in a single Web application.You need to prevent user profiles from being shared between the site collections.What should you do? A. B. C. D. Enable multi-tenant support. Create multiple profile databases. Create multiple content databases. Configure the Secure Store Service application.

Answer: A Section: (none) Explanation/Reference:

QUESTION 132 You need to ensure that users can upload 100-MB files to a document library. What should you do? A. B. C. D. From Site Settings, configure the site libraries and lists. From Site Settings, configure the site collection policies. From the document library, configure the Library Settings. From Central Administration, modify the Web Application General Settings.

Answer: D Section: (none) Explanation/Reference:

QUESTION 133 You have a SharePoint Server 2010 server farm.You need to ensure that a user named User1 can manage all of the sites in a site collection. You must achieve this goal while preventing User1 from managing the SharePoint Recycle Bin.What should you do? A. B. C. D. From Site Settings, configure the site permissions. From Site Settings, configure the site collection administrators. From Central Administration, configure the site collection administrators. From Central Administration, configure the Web Application General Settings.

Answer: C Section: (none) Explanation/Reference:

QUESTION 134 You have a SharePoint Server 2010 server farm.You attempt to enable the SharePoint Server Publishing feature on a site and receive the following error message: "The feature you are trying to activate is from the scope Web. It has a dependency on another feature in the Site scope which is a hidden feature."You need to ensure that you can enable the SharePoint Publishing feature. What should you do first? A. B. C. D. Run the install-spfeature cmdlet. Run stsadm.exe and specify the installfeature operation. From Site Settings, configure Search Scopes. From Site Settings, configure Site Collection Features.

Answer: D Section: (none) Explanation/Reference:

QUESTION 135 You have a SharePoint Server 2010 server farm.You have a SharePoint solution named Solution1. Solution1 contains a feature named Feature1. Featue1 installs a custom Web Part to the Global Assembly Cache.You deactivate Feature1 and retract Solution1 from the server farm.The custom Web Part still appears on the list of Web Parts that users can add to Web Part pages.You need to prevent the custom Web Part from appearing on the list of Web Parts that users can add to Web Part pages. What should you do? A. B. C. D. Modify the default.master master page. Run gacutil.exe and specify the uninstall parameter. Run stsadm.exe and specify the deletesolution operation. Delete the Web Part descriptor from the Web Part Gallery.

Answer: D Section: (none) Explanation/Reference:

QUESTION 136 You have a SharePoint Server 2010 server farm.You have a Web application that contains the following site collections: A site named Corp that has a document library named Docs A site named Records that was created by using the Records Center site templates You need to ensure that users can route document sets from Docs to the Drop Off Library in Records. What should you do? A. Create a content organizer rule for the Document Set content type in Corp. B. Create a content organizer rule for the Document Set content type in Records. C. From Central Administration, modify tho Configure Send To Connections settings for the Web application. D. From Document Library Settings, set the Custom Send To Destination value to the URL of tho Drop Off Library. Answer: A Section: (none) Explanation/Reference:

QUESTION 137 You havo a SharePoint Server 2010 server farm that has a Wab application named WebApp. WebApp contains a site collection that is accessed by using the URL http://app.contoso.com. you configure anonymous access for WebApp, but users are unable to log on anonymosly.You need to allow anonymous access to http://app.contoso.com. What should you do? A. B. C. D. From Site Settings, configure the Site Permissions. From Site Settings, configure the Portal Site Connection. From Central Administration, configure the Permission Policy. From Central Administration, configure the Authentication Providors.

Answer: D Section: (none) Explanation/Reference:

QUESTION 138 You have a SharePoint Server 2010 server farm.You need to modify the frequency of immediate alerts for a Web application. What should you configure? A. B. C. D. the outgoing e-mail settings of the Web application the properties of the Windows SharePoint Services Timer V4 service the Resource Throttling settings of the Web application the timer job definitions

Answer: C Section: (none) Explanation/Reference:

QUESTION 139 You have a SharePoint Server 2010 server farm.You have a publishing site that is accessed anonymously.You need to disable anonymous access to the AllItems.aspx and EditForm.aspx pages. Anonymous access to other pages in the site must be enabled. What should you do? A. B. C. D. Activate the ViewFormPagesLockDown feature. Deactivate the SharePoint Server Publishing Infrastructure feature. From Central Administration, modify the authontication provider. From Central Administration, modify the permission policy for the Web application.

Answer: D Section: (none) Explanation/Reference:

QUESTION 140 You have a SharePoint Server 2010 server farm.You create a new site named Site1. You create a new SharePoint group named Group1.You need to ensure that the members of Group1 can modify the site permissions of Site1. The solution must minimize the number of permissions assigned to Group1. What should you do? A. B. C. D. Assign the Design persmission level to Group1. Assign the Full Control persmission level to Group1. Modify the Primary Site Collection Administrator settings. Modify the Secondary Site Collection Administrator settings.

Answer: B

Section: (none) Explanation/Reference:

QUESTION 141 You have a SharePoint Server 2010 server farm.You have two Web applications named WebApp1 and WebApp2. WebApp2 contains a documont library named Archive.You need to ensure that users can send documents from all of the documont libraries in WebApp1 to the Archive documont library. What should you do? A. B. C. D. Activate the Content Organizer feature in the root site collection of WebApp1. From Central Administration, modify the General Settings for WebApp1. From Central Administration, modify the Configure Sand To Connections settings. From tho Document Library settings of Archive, set the Custom Send To Destination values.

Answer: A Section: (none) Explanation/Reference:

QUESTION 142 You have a Web application named WebApp1. WebApp1 contains one site collection.You need to configure the Anonymous Access Restrictions settings for WebApp1.Which settings should you modify before you configure the Anonymous Access Restrictions settings? A. B. C. D. Authentication Providers Permission Policy User Permissions User Policy

Answer: D Section: (none) Explanation/Reference:

QUESTION 143 You have a SharePoint Server 2010 server farm.You need to configure the security of a site to meet the following requirements: Users in a SharePoint group named Group1 must be able to make changes to the content in the site. All other users must only be able to view the content in the site. The persmissions assigned to all users and groups must be minimized. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Add all users to the site's Visitors group. B. Add all users to the site's Members group. C. Assign the Design permissions to Group1.

D. Assign the Contribute permissions to Group1. Answer: AD Section: (none) Explanation/Reference:

QUESTION 144 You have a SharePoint Server 2010 server farm.From the Health Analyzer list, you discover the following messages in the Availability category: "Database has large amounts of unused space."You need to reduce the amount of unused space in the database. Which tool should you use? A. B. C. D. Central Administration Microsoft SQL Server Management Studio psconfig.exe stsadm.exe

Answer: B Section: (none) Explanation/Reference:

QUESTION 145 You have a SharePoint Server 2010 server farm.You need to ensure that users can sand e-mail messages to document libraries.What should you do? A. B. C. D. From Central Administration, configure the incoming e-mail settings. From Central Administration, configure the Web application outgoing e-mail settings. From Document Library Settings, modify the Custom Send To Destination value. From Site Settings, activate the E-mail Integration with Content Organizer feature.

Answer: A Section: (none) Explanation/Reference:

QUESTION 146 You have a SharePoint Server 2010 server farm.You have an Active Directory user account named Apps that is used for a large number of application pools.You need to change the password of Apps every 30 days. You must achieve this goal using the minimum amount of administrative effort. What should you do? A. B. C. D. Run stsadm.exe and specify the setapppassword operation. Run stsadm.exe and specify the updatefarmcredintials operation. From Central Administration, modify the managed accounts settings. From Central Administration, add Apps to the Delegated Administrators group.

Answer: C Section: (none) Explanation/Reference:

QUESTION 147 You have a SharePoint Server 2010 web application named Portal. Portal is configured to use NTLM authentication.From Central Administration, you configure Portal to use Kerberos authentication.You need to ensure that Kerberos authentication can be used to authenticate Portal.Which tool should you use? A. B. C. D. appcmd.exe psconfig.exe setspn.exe stsadm.exe

Answer: C Section: (none) Explanation/Reference:

QUESTION 148 You have a SharePoint Server 2010 server farm.You have a site named Site1 that has a document library named DocLib1.You need to configure the security for DocLib1 to meet the following requirements: Allow users to add items. Allow users to modify items. Allow users to approve items. Prevent users from deleting items. What should you do? A. B. C. D. Create a new user policy. Add the users to a new SharePoint group. Assign a new permission level to the users. Create a new information management policy.

Answer: C Section: (none) Explanation/Reference:

QUESTION 149 You have a SharePoint Server 2010 server farm.You have a Web application. The zones in the Web application are configured as shown in the following table.

Both zones use Windows authentication.You need to configure the Extranet zone to use basic

authentication.What should you do from Control Administration? A. B. C. D. Configure the site permissions. Modify the policy for the Web application. Configure the user permissions for the Web application. Configure the authentication providors for the Web application.

Answer: D Section: (none) Explanation/Reference:

QUESTION 150 You have a deployment of Microsoft Office SharePoint Server 2007 Service Pack 2 (SP2). The deployment includes the following servers: One Microsoft SQL Server 2005 server named Server1 One SharePoint server named Server2 All servers run the 64-bit edition of Windows Server 2003 Service Pack 2 (SP2). You need to ensure that you can perform an in-place upgrade of SharePoint Server 2010. What should you do? A. B. C. D. On Server1, upgrade SQL Server 2005 to SQL Server 2008. On Server2, install Windows Server 2003 Service Pack 3 (SP3). On Server1, upgrade to the 64-bit edition of Windows Server 2008. On Server2, upgrade to the 64-bit edition of Windows Server 2008.

Answer: D Section: (none) Explanation/Reference:

QUESTION 151 You have a Microsoft Office SharePoint Server 2007 Service Pack 1 (SP1) server farm. All servers in the farm run the 64-bit edition of Windows Server 2003 Service Pack 2 (SP2). You plan to perform an in-place upgrade to SharePoint Server 2010. You need to ensure that you can successfully run the SharePoint Server 2010 Pre-Upgrade Checker. What should you do? A. Install Windows PowerShell 2.0 on all servers in the farm. B. From Central Administration, select the Quiesce farm option. C. Upgrade all SharePoint servers to Windows Server 2008 and install Microsoft .NET Framework 4.0. D. Install Windows SharePoint Services 3.0 Service Pack 2 (SP2) and SharePoint Server 2007 SP2 on all SharePoint servers. Answer: D Section: (none) Explanation/Reference: