Datasheet Power Xpert 9395P UPS 250 - 1200 kVA

Power Xpert 9395P UPS

250 - 1200 kVA

Double conversion UPS

10% more power

• 96.3% double conversion efficiency, delivers 10% more power
than the previous 9395 UPS.
• Complete isolation of output power from all input power
anomalies, to deliver 100% conditioned, perfect sine-wave
output – even during severe power disturbance.
• High efficiency even when UPS load levels are low, optimised
by Variable Module Management System (VMMS).
• Energy Saver System (ESS) improves efficiency levels to 99%
by suspending power modules when double conversion is not
required. Switches to double conversion mode in less than
2 milliseconds in event of pre-set input limits being exceeded.
Power Xpert 9395P UPS with optional Filtering against fast low-energy transients provided by ESS.
power module status lights • Producing 18% less heat helps reduce the need for cooling.
Designed for continuous operation at ambient temperatures
up to 40°C without de-rating. Can also deliver safe power
Advanced power protection for: in higher temperatures without shutting down.
• Large data centres, infrastructure
projects, industrial complexes and Ultimate resiliency
other buildings • HotSync® patented load-sharing technology enables parallel
• Process control equipment operating of static converters without communication or load-
• Healthcare
share signals. Eliminating the communication link eliminates
risk of single point of failure.
• Finance and banking infrastructure
• One static switch per UPS enables the full bypass capacity
• Transportation systems
to be achieved from day one. Power modules can be added
• Security operations as loads increase.
• Telecommunications installations • Wide power factor range meets rapidly changing load power
factor without de-rating.
• Intelligent battery charging through Advanced Battery
Management prevents unnecessary charging and significantly
retards battery wear rate.

Scalability and flexibility

• Number of power modules per UPS can be specified.
• Layout can be chosen to suit installation: back-to-back,
L-shaped etc. Front-accessible design minimises installation
costs and saves valuable data centre space.
• Preferred bypass topology can be specified. Additional
modules can be added as power load increases.
• Centralised multi-module paralleled 9395P systems are
supported by the Eaton System Bypass Module (SBM).
Available in ratings from 2000 A to 5000 A as standard, the
SBM includes a continuous-duty centralised static switch,
backfeed protection device and centralised bypass systems.
• Service disconnect in each power module allows easy
maintenance while the UPS is supporting the load
in double conversion mode.
• More than 90% of materials used can be recycled, decreasing
end-of-life impact.
Power Xpert 9395P UPS
UPS output power rating Battery
kVA 250 300 500 600 750 900 1000 1200 Type VRLA, AGM, Gel, Wet Cell
kW 250 275 500 550 750 825 1000 1100 Current limited constant voltage charging, or
Charging method
Eaton Advanced Battery Management (ABM)
General
Temperature compensation Optional
Efficiency in double
95.6%
conversion mode (full load) Battery nominal voltage
480 V (40 x 12 V, 240 cells)
(lead-acid)
Efficiency in double
96.3%
conversion mode (half load) Charging current / Model 300 600 900 1200
VMMS (double conversion) Significantly increased efficiency at low loads Max* A 120 240 360 480
Efficiency in Energy Saver *Limited by maximum UPS input current rating
Up to 99.3%
System (ESS) Dimensions and weights
Distributed parallelling with
Up to 7 300 kVA 1350 x 880 x 1880 mm (wxdxh) 830 kg
Hot Sync technology
In 600 kVA: 300 kVA 600 kVA 1890 x 880 x 1880 mm 1440 kg
Internal N+1
In 900 kVA: 600 kVA 900 kVA 3710 x 880 x 1880 mm 2680 kg
redundance capable
In 1200 kVA: 900 kVA
1200 kVA 4450 x 880 x 1880 mm 3120 kg
Field upgradable Yes
Accessories
Inverter/rectifier topology Transformer-free IGBT with PWM
78 dB (300 kVA); <81 dB (600 kVA); External battery cabinets with long-life batteries,
Audible noise
<83 dB (900 kVA); <85 dB (1200 kVA) X-Slot connectivity (Web/SNMP, ModBus/Jbus,
Altitude (max) 1000 m without derating (max 2000 m) Relay, Hot Sync, ViewUPS-X remote display),
integrated manual bypass for 300 kVA model
Input
Input wiring 3 ph + N + PE Communications

Nominal voltage rating X-Slot 4 communication bays

220/380, 230/400, 240/415 V 50/60 Hz
(configurable)
Relay inputs/outputs 5/1 programmable
+15% / -15% for 400 V or 415 V
Input voltage range +15% / -10% for 380 V Compliance with standards
+10% / -10% for bypass Safety (CB certified) IEC 62040-1
Input frequency range 45-65 Hz EMC IEC 62040-2
Input power factor 0.99 Performance IEC 62040-3
<3% on nominal load in double
Input ITHD
conversion mode
Soft start capability Yes
Internal backfeed protection Yes, standard
Output
Output wiring 3 ph + N + PE
Nominal voltage rating
220/380, 230/400, 240/415 V 50/60 Hz
(configurable)

Output UTHD <2% (100% linear load), <5% (non linear load)

0.9 (300, 600, 900 and 1200 kVA models)

Output power factor
1.0 (250, 500, 750 and 1000 kVA models)
Permitted load power factor 0.7 lagging - 0.8 leading
10 min 100-110%; 30 sec 110-125%;
Overload on inverter
10 sec 125-150%; 300 ms >150%

Overload when Continuous <115%, 20 ms 1000% Note! Bypass

bypass available fuses may limit the overload capability

© 2015 Eaton Eaton is a registered trademark.

All Rights Reserved
Publication No: PS153008EN All other trademarks are property of their
September 2015 www.eaton.eu/powerquality respective owners.