How many wireless client can connect when wireless card is configured to mode =bridge
Jawab : 1
DNS request can use protocol :
Jawab : UDP53, TCP53
Netinstall can be used to :
Jawab :
Reinstall softwere without losing licence
Install different softwere version (upgrade or downgrade)
In the route list, the identification Dab for a route stands for
Jawab :
Dynamic - active – BGP
Simple queue number 0 difines 2m for upload and download target ip 10.10.0.33, simpelqueue number
1 difines 4m for upload and download target IP 10.10.0.33. the Max bandwidth that the client
10.10.0.33 is able to obtain is
Jawab :
2M upload/download
Firewall configuration isfolowing
1 ip firewall filter add client chain=input protocol=icmp action=jump jump-target=icmp
2 ip firewall filter add client chain=input protocol=icmp action=log log-prefix=icmp-deny
3 ip firewall filter add client chain=input protocol=icmp action=drop
4 ip firewall filter add client chain=input protocol=icmp action=drop log=yes log-prefix=JUMP-
ICMP_deney
Jawab :
Aroute will log it with icmp denay
Router will drop the pakage at the input drop rule (3rd rule)
Route will log it with prefix jump-icmp-deny
Router will drop the paket at icmp (jumo) chain drop (4th rule)
Interface wireless access-list is used for
Jawab :
Shows a list of client mac address that are alredy regist at ap
Ppp secrets are used for
Jawab
Pptp client
Pppoe client
L2t pclient
What is the meaning of the status letter “R” on a pppoe client interface in routerOS interface menu
Jawab :
Runing
For staticrouting function additionality to the routeros ‘system’ pakage you will also need the following
softwere pakage
Jawab :
No extrapakage
How many differen prioty can be selected for queue
Jawab :
What is thecorect action for nat rule on a router that should intercept smtp traffic and send to over to a
specifird mall server
Jawab
Dst-nat
When viewing DAC
Jawab :
Dynamic, aktif, connected
Destination nat (chain dstnat, action dstnat) can be used to
Jawab :
Direct user from the internet to a server within your local network
Change destination port
Pppoe server only works within one ethernet broadcast domain that it is connected to. If there is a
router between server and end-user host it will not be able to created pppoe tunel to that pppoe server
Jawab
True
what is the port winbox
jawab :
tcp- 8291
akses web server dari LAN dan IP Publik
jawab
public ip address of the webserver must be isntalled on nat router
connection tracking mustbe enabled on nat router
in ipfirewall nat the should b a dst-nat between the public ip of router and the private ip of the
webserver
to applay bandwidth restriction using simple queue on traffic that travels from on bridge port to another
bridge port
jawab
associate the simple queue to bridge interface
is possible to limit how client are able to connect to an access point?
Jawab
Yess, but only with access-list
A wireless interface “wlan1” is added to a bridge interface “br-lan”. To enable dhcp-server for wireless
interface “wlan1” on witch interface should dhcp-server be configure?
Jawab
Onbrlan
Port PPTP server
Jawab
TCP1723
Select statmen that are true regarding the following command:ip route add dst-address=172.16.4.0/24
gateway 192.168.4.2
Jawab
The command is used to establish a static route
The subnet mask for the destination network is 255.255.255.0
What kind of user are listed in the /users
Jawab :
Router user
To use masquerade, you need to specfy
Jawab
Action=masquerade out-interface chain=src-nat
Route : dst-addr=10.1.1.0/24 gateway=5.5.5.5
Dst-addr=10.1.1.4/30 gateway=5.6.6.6
Witch gateway 10.1.1.6?
Jawab
5.6.6.6
Witch feature are removed when advanced-tools pakage is unintslled
Jawab
Ipscan
Netwatch
What is necessary for pppoe client configuration
Jawab
Interface(on witch pppoe client configuration)
Accesslist can control bandwidth
Jawab
True
You want to transfer existing /ip firewall filter configuration
Jawab
Export firewall filter
During scan
Jawab
Supperchanel
Encryption could be used to establish connected with a simple passkey
jawab
WPA PSK/WPA2PSK
Mark all correct answer
Jawab
Default forwarding cloud be enabled for a specific client
Connect-list
Jawab
SSID manual
If arp=reply only is configured on an interface this interface will
Jawab
Accept ip and mac address combination
You want ti use pcq and allow 256 maximum download
Jawab
Kind=pcq pcq-rate=256000 pcq-classifer=src-addr
Kind=pcq pcq-rate=256000 pcq-classifer=dst-addr
When sending out an arp request, an ip host is expecting what kind of address for an answer
Jawab
Ipaddress mac address
Witch rule is used to blok smtp protocol
Jawab
Ip firewall filter add chain=forward protocol=tcp dst-port=25 action drop
Router hash wireless and ethernet client interfaces all client interface are bridge. To create a dhcp
service for all client.
jawab
Only on tne bridge
To blok communication between wireless client connected to the same accesspoin interface.
Jawab
Default-forwarding=no
Router firewall rules are
Ip firewall filter add chin forwardi action jump jump-target=custom
Ip firewall filter add chain custom action=passthrough
Ip firewall filter add chain=forward action=log
jawab
loged
what can be used target in the simple queue
jawab
server ip address
client ip address
802.11 wireles
Jawab
Csma/ca
Level 1 license valid
Jawab
Infinite time
Minimal pakage of wireless
Jawab
System
Wireless
IP 192.168.0.100/24, correct IP pool configuration?
Jawab
192.168.0.1-0.99, 0.101-0.254
The check gateway option is enable for router.
jawab
Gateway chek 10second after 2 failur gateway is consistend DHU
In case failure of the gateway router pointing to that gateway will become invalid
Action=dstnat in chain dst-nat
jawab
Change destination address dan port
Upload mikrotik os vertion pakage for upgrade
jawab
ftp root directory or /file directory of the router
EoIP
jawab
Layer 2 tunel that can bebridge
Mikrotik priorty tunnel protocol
Routing protocol used the same AS are referred to as exterior gateway protocol
Jawab: false
inOSPF network stub areas are responsible for wich of the following
jawab
reducing database size
reducing the memory requirement
select the correct statement about roting marks
jawab
packet with a router mark is ignored by main routing table if least one route for the routing
ech paket can be have more than one routing
what is the protocol number used by EoIP tunnel.
jawab
47
Which type of IP route is the highest priority
Jawab
Static route
What is the proper name in OSPF terminology for a router that redistribution routes from RIP to OSPF
Jawab
Autonomous System Baundary router(ASBR)
In OSPF when we set the nbma network type we must also configure :
Jawab
Nighbords
To create a router to different network 192.168.0.0/24
192.168.100.1
Pppoe-out1
Assuming that else where there are no problem which gateway will be installed into the routing tabbbke
as ‘active’
172.16.0.1
Selected valid routing protocol
BGP
OSPF
RIP
In OSPF interface configuration what effect will a passive=yes
It wil prevent routes learned through the interface from being listed in the routing table
Which VPN technologies can be used to bridge to remote network
EoIP
If route type is blackhole
Drop on this router
To routing private network together over a public routed
L2tp
Pptp
Ipip
To securely bridge layer2 togather tow remote network the following methods can be used
Eoip over sstp or over l2tp/ipsec
Sstp with bcp or l2tpipsec with bcp
Route is connected to 10.10.10.0/24 publik, and 10.1.1.0/24 local network. There are two route in the
routing table
0 dst-addr=0.0.0.0/0 gateway 10.10.10.10
1 dst-addr=0.0.0.0/0 gateway 10.10.10.11 routing-mark=server_traffic
And 2 rule in firewall
0 chain=prerouting src-address=10.1.1.12 action=mark-connection new-connection-mark=server_conn
1 chain=prerouting connection-mark=server_conn action=mark-connection new-connectio-
mark=server_traffic
Through which gateway will a client with an ip address of 10.1.1.12 establish a connection internet
Jawab :
Connaction are not possible in this confirmation
The correct order for pppoe discovery stage is :
Initialization, offer, request and session confirmation
What is the type of a router that is always connected to more than one OSPF area
Area Border router (ABR)
Is OSPF to ensuer that remote routing decision will be made based on both external dan internal
As type-1
How is pppoe concentrator discover
Layer 2 broadcash (PADI frame)
How many routing marks can be added to a routerOS device
251
There are two gateway to the internet in a network on two spare router. Both of them have ospf
routing. Using type 1 and type 2
The route distributed as type 2 wil be the preferred one
Which of the following are correct statment
Ospf request neighbord adjacemen
Ospf allows unequal cost
Minimum is the minimum configuration administrator needs to do a mikrotik router to enable ospf
Add a network ospf network configuration.
For a user(one entry) in local ppp database ( a ppp secret and profil)
Set max value for transferred
Allow only pppoe login
OSPF starts working on the router as soon as
At list one area is spesificated in ospf area menu
When is bridge control protocol BCP used
To pass layer 2 ethernet frame to ppp type interface
How many adiacencies are formrd in broadcast subnet with a DR dan BDR, consisting of 13 routers
Jawab
23
If router recived packet with ttl=1 then
Jawab
Pakage wil not be forwarding
Which description regerding OSPF network LAAL is correct when using broadcast type
Jawab
They are originate by the DR on every multi accessnetwork. They include all attached routers including
the DR
Consider two geographically separate site. At each site, there is a router OS device ether 1 is connected
to the LAN eher2 is connected to the internet
jawab
1 dhcp server 1 server on site B’s Router on the bridge interface
How many VLAN header do IEEE 802.1Q permit?
Which static-router rule will have priorty for destination 192.168.0.18
Dst-address=192.168.0.0/24 gateway192.168.3.1 distance=1
In ospf setting, the NBMA neighbor setting can be used to improve the stability
True
What is the maximum number of supported VLAN
4095
Please se the network diagram
A paket with destination address 10.11.12.5 passes via mikrotik router
Jawab
Paket will reach destination
routerOS device has acquired an IP address from an ISP using DHCP client. The same router is used for
assing IP address to local user using dhcp server, masquerade rule is configuration properly packet that
TTL=1
jawab
router has access to the internet but client do not
in broadcast network OSPF depends on the following to function correctly
Multicash
Concerning the OSPF protocol mark the correct statement
Jawab
Each router belonging to a OSPF network knows the best path to get to all other routers of the
networking from its point of view
The OSPF hello Protocol can use multicast address
The target scope can be use for
Jawab
To resolve nexthope that are not directly connected to the router
Mark all correct ECMP
Jawab
Ip route add dst-addr=0.0.0.0/0 gateway=10.10.10.1, 10.20.20.1
Ip route add dst-addr=0.0.0.0/0 gateway=10.10.10.1, 10.10.10.1, 10.20.20.1
If check gateway is enable for ECMP route and one of the gateway
Jawab
The unrichable gateway is not going be used
