Scribd
Upload
32 views1 page

Dos and Dont

Uploaded by

Mr. Rajib Bhowmik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

Dos and Dont

Uploaded by

Mr. Rajib Bhowmik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DO’S & DON’TS ON MILLING MACHINE

DO’S
 Do get thoroughly familiar with the stop lever.
 Do make sure that the work is held securely before engaging the cutter with it.
 Do make sure that all tools and machine parts are clear of the cutter before starting
the machine.
 Do keep all cutters carefully to guard against any injury to yourself or others.
 Do keep the shirt sleeves rolled up above the elbows and wear close fitting shop
aprons and coats.

DON’TS

 Don’t under any circumstances attempt to operate any machine unless you are
thoroughly familiar with it.
 Don’t attempt to remove chips from the machine with your bare hand or fingers. Use
brush or other suitable implement.
 Don’t go away leaving machine running. If not then shutdown the machine.
 Don’t attempt to oil the machines while it is in operation.
 Don’t wear rings or long neckties while on the job.

You might also like