Scribd
Upload
18 views1 page

HP - 1 Initial Configuration

Uploaded by

Kerence Tibayan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views1 page

HP - 1 Initial Configuration

Uploaded by

Kerence Tibayan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HP V1910-24G poe

1. login using the hyperterminal rate 38400


2. initialize and press yes
3. ipsetup ip-address x.x.x.x x.x.x.x

4. plug the cable to a the last ports


note. your pc should be on the same network

5. login to gui using the assigned ip address from the browser

6. go to network>vlan
7. go to CREATE- create the vlan 10,20, etc
8. go to MODIFY PORT which untagged and tagged(trunks)
9. click the ports then the vlan
ex. port 1-4
untagged
vlan: 10
port 5-10
tagged
vlan: 10,20,30,40,50
10. Then hit save
11 reboot

You might also like