FIG-A
434
217
30 30
100R
12 DIA X 300 LONG
STAMP 5mm LETTERS
COMBIND WEAR GAUGE
LCCF20(C). LWLH25 BOGIES
NOTEE MATERIAL
1. SURFACE MARKED AND DIMENSION IS:1875 CI-4, HARDENED & GROUND.
UNDER SCORED ARE IMPORTANT.
2. IF POINTS X & Y, Y START TOUCHING THE
CASTING, REPAIR SHALL BE UNDER TAKEN.
LCCF-20 (C) BOGIE
SCRIBE CENTRE LINE
BOTH SIDES
223
446 BOLSTER LAND
520ROTATION STOP LUG
530
MARKED CENTRE LINE
GAUGE CENTRE LINE
FIG-A
WORN ROTATION STOP LUG
RECLAIMED BY LINER
THICKNESS TO SUIT
WORN LAND SURFACES
LINERS RECLAIMED BY LINERS
OF SUNTABLE THICKNESS
NOTE
G3y
65
LI SURFACE MARKED
DIMENSION UNDER SCORED
ARE IMPORTANT.
MATERIAL
DETAIL OF LINER FOR LUG DETAIL OF LINER FOR LAND GAUGE TIP IS:1875 CI4
(MTL: IS:3885 PLI Gr.IV) HARDENED& GROUND BODY
(MTL.: IS:3885 PLI Gr.IV) IS:2062 E250A (Fe410W)
WORN SURFACES RECLAIMED
BY WELDING
WORN SURFACES RECLAIMED
134|
BY LINER OF SUITABLE THICK.
SCRIBE CENTRE 57
LINE BOTH SIDES
STAMP 5mm LETTERS
5R
cOLUMN JIB GAUGE
LCCF-20C)
241
14R
NOTE
SURFACE MARKED AND
DIMENSION UNDER SCORED
ARE IMPORTANT.
5
DETAIL OF LINER MATERIAL
GAUGE TIP IS:1875 Cl-4
HARDENED & GROUND BODY
FOR OUTER JIB
(MTL.: IS:3885 Pt! Gr.V)
IS:2062 E250A (Fe410W)
COLUMN SIDES ARE 1O BE RECLAIM D
NLDING SUITABLE LINWRS
GAUGE MUST BE TITLED WHEN APPLIED
mTH FRICTiON PLATE REMOYED
STAMP 5mm LETTERS 5mm PLATE
COLUMN GAUGE
LCCF-20(C), LWLH25 BOGIE
SCRIBE CENTRE
LINE BOTH SIDES
50 218
50
NOTE=
SURFACE MARKED 'AND
DIMENSION UNDER SCORED
ARE IMPORTANT.
MATERIAL:=
GAUGE TIP IS:1875 Cl-4
HARDENED & GROUND BODY
IS:2062 E250A (Fe 410 W)
DETAILS OF LINERS
MTL:-IS3885 PtJ
5
ANTI-ROTATION LUG GAUGE
ANTI ROTATION LUGS ARE TO BE RECLAIMED BY WELDING
LINERS TO SUIT
520
ANTI-ROTATION ILUG GAUGE
FOR LOW PLATFORM CONTANER
FLAT WAGON
STAMP 5mm LETTERS 5mm PLATE
448
SCRIBE CENTRE LINE
ON BOTH SIDES
30
THICKNESS TO SUIT
UB 244
DETAIL OF LINER
MTL- IS:3885
Pt. Gr.V
MATERIAL NOTE E
GAUGE TIP IS:1875 CI-4 SURFACE MARKED 'O' AND
HARDENED& GROUND BODY DIMENSION UNDER SCORED
IS:2062 E250A (Fe 410 W) ARE IMPORTANT.
WEDGE GAUGE
222
5mm PLATE 20R
50R
633
SR
20R
R
FRICTION SHOF WEAR GAUGE
LCCF-20(C)
20R
STAMP 5mm LETERS/ 52
NOTE
DIMENSIONS UNDER LINED AND
SURFACE MARKED ' THUS
ARE IMPORTANT. 50
MATERIAL
GAUGE TIP IS:1875 CI-4
HARDENED & GROUND BODY
IS:2062 E250A (Fe 410 W)
