Form 889ft—Revised

August, 1929
KINTED IN U. 8. A.

LIST
OF

PARTS

MACHINE No. 42-5

THE SINGER MANUFACTURING COMPANY

From the library of: Superior Sewing Machine & Supply LLC
 OoprwoHT, U. S. A.,
1917, 1918, 1920,1921, 1922, 1923 and 1929
BY The StNGEn Uanufactubing Coupant

All Rights Reserved fob all Cotamos

From the library of: Superior Sewing Machine & Supply LLC
 INDEX

PAGE

Accessories 13
Binder (Adjustable) No. 36344 15
" " " 120061 14
" " « 120247 14
" " " 120248 14
Binders on Shank 15
Bobbin Winder No. 5762 17
" 27549 18
" " " 41449 19
CoRDER (Adjustable) No. 28329 16
" " " 120207 16
For Covering Cord with Thin Leather 16
Hemmers on Shank 16
Knee Lifter Parts (Power Table) 19
" (Stand) 20
Machine No. 42-5 7
Numerical List of Parts 25
Obsolete Parts 23
Piping Attachments 17
PRESSER Feet 17
Stand (Rocking Treadle) 21
Trimmings for End and Back Leaf Table 22

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING

In ordering from thU list, use ONLY the part NUMBER

in the FIl^T column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after .some of the numbers indicate the style of
finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed
B—PolLshed, Nickel Plated and Buffed
C—Hardened Only
D—Polished Only
E—Soft, Not Poli.shed
F—Hardened and Polished
H—Blued
J—Nickel Plated Only
K—Hardened and Nickel Plated
L—Bra&s Plated
M—Oxidized
P—Japanned
R—Merlized
T—Copper Plated
T. A.—Hardened, Polished, Copper and Nickel Plated
and BufTed.
T. B.—Copper and Nickel Plated and Polished.
T. J.—Cojjper and Nickel Plated Only.
T. K.—Hardened, Copper and Nickel Plated.
T. M.—Copper Plated and Oxidized.
T. L.—Copper and Bra.ss Plated.
U—Zinc Plated
V—Silver Plated
W—Polished and Nickel Plated
Z—Chromium Plated
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series:
1 to 1500 and 50001 to 51.500 are Screw Numbers.
1501 to 1800 and 51501 to 518(K) are Nut Numbers.
1801 to 2000 and 51801 to 520(X3 are Roller Numbers.
2001 to 5(XX)t) and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.

From the library of: Superior Sewing Machine & Supply LLC
 LIST OF PARTS COMPLETE

FOR

L .iOW

MACHINE No. 42-5

CYLINDER SHUniE, DROP FEED, ALTERNATING
PRESSERS

NO. PLATE NAME

*S801 Arm with 4448 and 4449
2002 3636 " Dowel Pin
4448 695 " Oil Tube for intermediate bearing.
123e 691 " Screw
6178 3628 " Shaft for 3011
6179 3628 " " " 6977
♦13257 " " " 6179 with 3032 and 8184.
3005 3629 " " Bushing (back)
448c 691 " " " " Set Screw...
*4449 " " " (front)
144d 691 " " Screw
4288 3629 " Side Cover
286d 692 " " " Thumb Screw
5811 695 " Spool Pin and Thread Eyelet
8879 7801 " " " Washer (cloth)

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 42-5

NO. PLATE NAME

3011 3628 Balance Wlieel (two speed) 3 in. and 5 in.
pulleys, with two 448c
5977 3628 Balance Wheel (two speed) for 5981
448c 691 " Set Screw
♦5992 Bed with two 3016 and six 3021
3016 3630 Bed Hinge complete, Nos. 3017, 3018 and
3020
3017 Bed Hinge (half butt) for 5992
3018 " " " " wood table....
3020 3641 " - " Pin
3021 3636 " " Rivet
5969 3630 Crank Connecting Rod with 4349 and
two 158e
♦4349 Crank Connecting Rod Cap
' 158e 691 " " Screw
565c 7808 " " Hinge Screw
1513J 693 " " " " " Nut.
5978 3635 Driving Flange with two 435c
5979 3632 " " Latch
136p 691 " Hinge Screw
5980 3632 " " Spring
330d 692 " " " Screw
435c 691 " " Set Screw
•6993 DrivingFlange complete, Nos. 136f, 330d
and 5978 to 5980
13254 7807 Face Plato
13255 " 13254 with 2105
13256 Face Plate complete, Nos. 448c, 2127,
5797, 5989, 5991, 13255, 56870 and
two 233d
175d Face Plate Screw
691
56870 7808 " Thread Guard
233d 691 " " " " Screw
5839 3630 Feed Bar
313c 692 " " Screw Centre
1519J 693 " " " " Nut
3032 3629 " Cam with 446c
446c 691 " " Set Screw
3033 3632 " Connecting Link
375c 692 " " " Hinge Screw
1518b 693 " " " " " Nut.
8190 3631 " Dog
<( «
8196 3647
5840 3647 " " 12 teeth, for canvas work
u it
5899 3618
ti a
8153 7796
13252 3647 " " 14 teeth (18 teeth to the inch)
for leather

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 42-5

NO. PLATE name

191c 691 Feed Dog Screw

3037 3629 " Forked Connection
375c 692 " " " Hinge Screw...
1518b 693 " Forked Connection Hinge Screw Nut
5996 3630 " Lifting Rock Shaft..;
5997 3630 " « " " Crank Fork with
157e
157e 691 Feed Lifting Rock Shaft Crank Fork
Clamping Screw
8154 3630 Feed Lifting Rock Shaft Crank with
1813 and two 1186e
1186e 3636 Feed Lifting Rock Shaft Crank Clamping
Screw
1813 693 Feed Lifting Rock Shaft Crank Roller
and Stud
3039 3632 Feed Regulator
1128e 3632 " " Hinge Screw
818d 692 " " Thumb Screw
3042 3628 " Rock Shaft
56880 Feed Rock Shaft complete, Nos. 3042 and
29633
29633 7808 Feed Rock Shaft Crank with 157/
2049 3632 « " " " Pin
157j 691 " " " " Set Screw
304c 692 " " " Screw Centre
1513J 693 " « « " " Nut
25868 3637 Guide
747d 3641 " Thumb Screw
3126 3633 " Bar
56752 " " 3126 with 2361 and two 2362
56844 " " 56752 with 337d and 3137....
4730 Guide Bar complete, Nos. 810d, 810e,
3134, 4723, 4897, 56844 and three 404d
4854 3633 Guide Bar Driving Crank with 1862 and
3131
1862 3638 Guide Bar Driving Crank Roller
3131 3633 " " " " " Cap....
3094 3633 " " " " Wedge
690e 691 " " " " " Adjusting
Screw
4723 3633 Guide Bar Lifting Bracket
404d 692 " " " Screw
2058 3630 Lifting Presser Bar
3133 3632 " " " Bracket with 641e and
1823
641e 691 Lifting Presser Bar Bracket Clamping
Screw

From the library of: Superior Sewing Machine & Supply LLC
 10 PARTS FOR MACHINE No. 42-5

NO. PLATE NAME

1823 693 Lifting Presser Bar Bracket Roller and
Stud
8191 3631 Lifting Presser Bar Lifter
598c 691 " " " " Screw
4725 695 " " " Lifting Bracket
4726 695 " " " " « Guide
Pin
32675 7808 Lifting Presser Bar Spring
2070 3632 " " " " Washer
5816 3631 " " Foot
193d 691 " " " Screw
5981 loose Wheel Attachment complete, Nos.
5977 and 5993
4264 3630 Needle Bar
*4898 3633 " " Connecting Link with 390e. .
56764 " " « " 4898 with
15472
390b 692 Needle Bar Connecting Link Adjusting
Screw
15472 3633 Needle Bar Connecting Stud with 155c. .
155c 691 " " " " Set Screw..
4265 " Clamp with 196f
4865 3632 Needle Clamp complete, Nos. 651d, 4265
and 4266
4266 3632 Needle Clamp Thread Guide....
651d 692 " " " " Screw
196p 3632 " « Screw
5778 3629 Oil Cup
5779 695 " " Pad (felt) "
211d 692 " " " Screw
7071 695 " " « " Washer
135d 691 " " Screw
5780 695 " " Thread Eyelet
5781 OUCupcomplete, Nos. 211d, 5778 to 5780
and 7071
*5970 3629 Oscillating Rock Shaft with 11I65
8163 " " " 5970 with 635c,
1513J and 56812
3052 3629 OscillatingRock Shaft Hinge Pin
56812 " " " " " 3052
with 1513J
1513j 693 Oscillating Rock Shaft Hinge Pin Nut...
635c 692 " " " " " Screw
Bearing
1513j 693 Oscillating Rock Shaft Hinge Pin Screw
Bearing Nut
11165 695 Oscillating Rock Shaft Oil Pad
8166 3630 " Shaft

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 42-5 11

NO. PLATE NAME

5917 3634 Oscillating Shaft Collar with 453c

453c 692 " " " Set Screw
5999 " " Crank
6000 3632 Oscillating Shaft Crank complete, Nos.
453c, 1513J, 1885 and 5999
2049 3632 Oscillating Shaft Crank Pin
453c 692 " " " Set Screw
1885 693 " " " Roller with 190d,
1054c and 5968
190d 691 Oscillating Shaft Crank Roller Cap Screw
5968 3632 " " " " " "
Washer
1054c 3632 Oscillating Shaft Crank Roller Screw Stud
1513J 693 " " " " "
Nut
262j 692 Pressure Regulating Thumb Screw
14535 685 Shuttle Bobbin
13258 7809 " Cylinder
18259 " " 13258 with 773p and
13264
13266 7808 Shuttle Cylinder Hinge Pin
13261 7808 " " Latch
229d 7808 " " " Screw
13262 7809 Shuttle Frame
13263 " " 13262 with 229d and 13261
773f 692
Shuttle Tension Regulating Screw
13264 7808" " Spring
13265 7809 Shuttle (cylinder) 2^ in. diam., complete,
Nos. 13259, 13263, 13266 and 14535...
5833 3634 Shuttle Driver
2022 3634 " " Pin
5848 3635 " Race Back
5939 3635 " " " Spring
5842 3634 " " " " Rest Pin
933d 3634 " " " " Screw
5965 3634 " " " Steady Pin
5843 3635 " " Body
8193 " " " 5843 with 5842, 5844,
5845 and two each 219d, 934j and 5965
5844 3636 Shuttle Race Cap (left)
5845 3636 " " " (right)
219d 691 " " " Screw (large)
934j 3636 " " " " (small)
5841 Shuttle Race complete, Nos. 933d, 5848,
5939 and 8193
5943 3635 Shuttle Race Frame with 5944
575b 3636 " " " Clamping Screw,...

From the library of: Superior Sewing Machine & Supply LLC
 12 PARTS FOR MACHINE No. 42-5

NO. PLATE NAME

5944 3636 Shuttle Race Frame Steady Pin

141d 3636 " " Screw
5945 " Slide
5946 3635 Shuttle Race Slide complete, Nos. 5945,
5947 and two 725e
5947 3635 Shuttle Race Slide Spring
725e 3636 " " " " Screw
1560c 693 Tension Regulating Thumb Nut
2103 685 " Spring
817c 693 " Stud
448c 691 " " Set Screw
2105 3636 " Thread Guard
5983 3636 " Washer (felt)
5984 3636 " " (steel)
5795 3636 " Wheel with 5796
*5796 " " Flange
5797 Tension complete (wheel) Nos. 817c,
1560c, 2103, 5795 and two each 5983

12296 3636 Thread Eyelet (side of arm)

2455 685 " Retainer Disc
1562J 693 " " Regulating Thumb Nut.
418d 693 " " Screw Stud
10141 685 " " Spring
5989 Thread Retainer complete, Nos. 418d,
1562j, 10141 and two 2455
•8184 Thread Take-up Cam
5793 3635 " " " 8184 with 446c....
3012 3636 " " " Pin
446c 691 " Set Screw
*5758 3635 " " Lever with 1819
8159 " " " 5758 with 1088c..
1088c 3636 " " " Hinge Screw
1819 693 " " " Roller and Stud..
5991 3636 " " Spring
2127 3636 " " " Regulator Plate
« (( « « ((
233d 691

8192 3631 Throat Plate for 8190

8197 " " Body
8198 3647 " Needle Hole Strip
401e 7801 " " " " " Screw...
8199 3647 Throat Plate complete for 8196, Nos. 8197,
8198 and two 401e
5862 3618 Throat Plate for 5899
6865 « " Body
5866 3618 " « Needle Hole Strip

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 42-5 13

NO. PLATE NAME

401e 7801 Throat Plate Needle Hole Strip Screw...
5867 3618 Throat Plate complete for 8153, Nos.
5865, 5866 and two 401e
5880 Throat Plate Body
5853 " " Needle Hole Strip
40lE 7801 " " " " " Screw...
5881 3647 Throat Plate complete for 5840, Nos.
5853, 5880 and twu 401e
5759 3640 Throat Plate for 13252
742f 692 Throat Plate Screw
3134 3633 Vibrating Presser Bar
2361 3633 " " " Hinge Bracket
2362 3633 " " " " " Rivet
810d 3633 " " " " Cap Screw..
4897 3633 " " " Lifting Bell Crank
810e 3633 " " " " " "
Cap Screw
3137 3633 Vibrating Presser Bar Spring
337d 692 " " " " Screw
5890 3631 " " Foot
5814 3624 " " " for 5840
217f 691 " " " Screw
5975 3627 Drip Pan (stand) with four wood screws
^ in. No. 5
5976 Drip Pan (power table) with four wood
screws ^ in. No. 5

ACCESSORIES
NO. PLATE NAME
27056 3637 Machine Button with wood screw in.
No. 14 R. H. B
41400 3637 Machine Rest Pin (wood)
120342 3637 Oiler (copper plated) with 120343
120343 3637 " Spout, 3H in. long
26026 3637 Screw Driver (large)
26485 3637 " " (small)
4347 3637 Wrench for 1513 and 1518

BINDER (Adjustable)
TO TURN IN UPPER EDGE ONLY FOR LIGHT OR
MEDIUM WEIGHT MATERIAL

NO. PLATE NAME

120242 7790 Bed with 1036o
120244 7790 Folder (upper)

From the library of: Superior Sewing Machine & Supply LLC
 14 BINDER (ADJUSTABLE)

NO. PLATE NAME

120245 7790 Guide (centre)

120246 7790 " (lower)
286d 692 " Thumbscrew
1036c 7790 Leveling Screw
120247 7790 Binder complete, Nos. 286d, 120242 and
120244 to 120246
35364 7796 Lifting Presser Foot
35365 7796 Vibrating Presser Foot

BINDER (Adjustable)
TO TURN IN BOTH EDGES. FOR LIGHT OR MEDIUM
WEIGHT MATERIAL

NO. PLATE NAME

120242 7791 Bed with 1036c

120243 7791 Folder (lower)
120244 7791 " (upper)
120245 7791 Guide (centre)
286d 692 " Thumb Screw
1036c 7790 Leveling Screw
120248 7791 Binder complete, Nos. 286d and 120242 to
120245
35364 7796 Lifting Presser Foot
35365 7796 Vibrating Pres.ser Foot

BINDER (Adjustable)
FOR 1/2 IN. TO 11/2 IN. LEATHER BINDING, FOR
SHORT CURVES

NO. PLATE NAME

36340 5830 Bed with two each 1036c and 1266o

120058 5830 Edge Guide
181d 5830 " Screw
41544 5830 " Washer
120059 5830 Guide (lower)
120060 5830 " (upper)
286d 5830 " Thumb Screw
1036c 7790 Leveling Screw (back)
1266c 7801 " (front)
120061 5830 Binder complete, Nos. 181d, 286d, 36340,
41644 and 120058 to 120060
35364 7796 Lifting Presser Foot
35365 7796 Vibrating Presser Foot

From the library of: Superior Sewing Machine & Supply LLC
 ir>

BINDER (Adjustable)
FOR LEATHER BINDING, FOR CANVAS BAGS,
LEGGINGS. ETC.

NO. PLATE NAME

36340 5807 Bed with two each 1036c and 1266c

36341 5807 Edge Guide
67Id 5807 " " Thumbscrew
36342 5807 Guide (lower)
36343 58D7 " (upper)
286d 5807 " Thumb Screw
1036c 7790 Leveling Screw (back)
1266c 7801 " " (front)
36344 5807 Binder complete, Nos. 286d, 671d and
36340 to 36343
36345 7796 Lifting Presser Foot
36346 7796 Vibrating Presser Foot

BINDERS ON SHANK
NO. PLATE NAME

28307 7797 Binder on Shank

28306 7797 Vibrating Presser Foot for 28307
28894 3612 Binder on Shank, for carpets
35144 3624 " • " 35145
5856 3624 Feed Dog for 35145
5816 3624 Lifting Presser Foot for 35145
5804 3624 Throat Plate for 5856
5814 3624 Vibrating Presser Foot for 35145
35145 Binder complete, for patent leather or
drill strip, to turn top edge under, for
carpets, Nos. 5804, 5814, 5816, 5856
and 35144

CORDER (Adjustable)
FOR SHORT TURNS ON CUSHIONS

NO. PLATE NAME

26795 7798 Cord Guide

26796 7798 " " Arm with 26798 and three
6037
1044d 7798 Cord Guide Arm Hinge Screw
120206 7798 " " Bed with 457c
457c 7798 " " " Leveling Screw

From the library of: Superior Sewing Machine & Supply LLC
 16 CORDER (ADJUSTABLE)
NO. PLATE NAME

26798 7798 Cord Guide Bracket

6037 7798 " " " Rivet
190d 691 " " Screw
120207 7798 Corder complete, Nos. 190d, 1044d, 26795,
20796 and 120206
120293 7798 Lifting Presser Foot (grooved)
120294 7798 Vibrating Presser Foot (grooved)

CORDER (Adjustable)
FOR BUGGY CUSHIONS

This Corder is the same as No. 120207 with the

following exceptions:

NO. PLATE NAME

28328 3608 Cord Guide Bed, in place of 120206

28329 360S Corder complete, Nos. 190i), 1044d, 26795,
26796 and 28328
28325 3608 Lifting Presser Foot
28326 3608 Vibrating Presser Foot
Note. When ordering Nos. 28325 or 28326 send
sample of the cord to be used

FOR COVERING CORD WITH

THIN LEATHER
NO. PLATE NAME

35291 3603 Feed Dog (grooved)

28314 3603 Lifting Presser Foot
28317 3603 Thiioat Plate (grooved) for 35291
28315 3603 Vibrating Presser Foot

HEMMERS ON SHANK
NO. PLATE NAME

28333 7799 Hemmer on Shank

36013 5708 " " " for i"- to 'o*
hem, for canvas
36014 Hemmer on Shank, for in. to 2 in. hem,
for canvas
36015 5708 Feed Dog for 36013 and 36014
36016 5708 Throat Plate for 36015

From the library of: Superior Sewing Machine & Supply LLC
 17

PRESSER FEET
NO. PLATE NAME

26996 7796 Lifting Presser Foot with stitch set

28323 7796 " " " " teeth on bottom
of bend of toe part
28324 7796 Vibrating Presser Foot with teeth on
bottom of bend of forked part

PIPING ATTACHMENTS
NO. PLATE NAME

36111 7797 Piping Attachment

26800 7797 " " on Shank
120099 7797 Lifting Presser Foot for 26800
120100 7797 Vibrating Presser Foot for 26800

BOBBIN WINDER
NO. PLATE NAME

5958 3638 Bracket

159d 691 " Screw
5959 3638 Frame
5809 Frame complete, Nos. 333d, 5761, 5959
to 5961 and 5963
46d 691 Frame Hinge Screw
5960 3638 Friction Wheel (leather)
5961 3638 " " Washer
333d 692 " " " Screw
5761 3638 Spindle
5963 3638 " Flange
11114 3638 Spring
190d 691 " Screw
5762 3638 Bobbin Winder complete, Nos. 46d, 190d,
5809, 5958 and 11114

BOBBIN WINDER
(SWINGING AUTOMATIC, RIGHT HAND)
FOR 14535

NO. PL.VTE NAME

15072 7801 Bobbin Position Pin

27540 7800 Base
27527 7800 Frame
50356d 7801 " Hinge Screw
1620J 7801 " " " Nut
27303 7801 " Spring

From the library of: Superior Sewing Machine & Supply LLC
 18 BOBBIN WINDER

NO. PLATE NAME

27541 7800 Pulley

27330 7800 Spindle with 15072
27306 7800 Spool Pin
27307 7800 " Stand
27308 7800 Spool Stand complete, Nos. 41Se, 1562j,
2100, 10141, 11241, 27306, 27307 and
two each 2455 and wood screws 1 in.
No. 10
11241 7800 Spool W'asher (cloth)
27331 7800 Stop Latch
35d 7801 " " Hinge Screw
2455 685 Tension Disc
1562J (393 " Regulating Thumb Nut
41Se (393 " Screw Stud
10141 085 " Spring
2106 7801 Thread Guide
27C49 7800 Bol)biii Winder, Nos. 35d, 1620j, 27303,
27330, 27331, 27527, 27540, 27541,
50350u and two wood screws 1 in.
No. 7
27549 Boi)l)in Winder (swinging automatic, right
hand) complete, Nos. 27308 and 27049

BOBBIN WINDER
(SWINGING AUTOMATIC, RIGHT HAND)

FOR FLAT OR ROUND BELT, FOR 14535

NO. PLATE NAME

41439 7804 Base with 45Sc, 27916 and two 28084.

41398 3.583 Boblun Carrier Key
2791(3 3583 Brake (leather)
280.84 .3.583 " Rivet
41440 3581 Frame
41441 3.581 " Hinge Pin
45Sc 3583 " " " Set Screw
4784 3583 " Oil Pad
41442 3581 " Spring
41443 3581 Pulley with 155c
155(; 3583 " Set Screw
41444 7.804 Spindle witli 41398
41445 7.804 Stop Latch
41446 7.804 " " Hinge Pin
2269 3.5.83 " " Pin
41447 3581 Trijiping Arm with 176d
176d 3583 " " Clamping Screw

From the library of: Superior Sewing Machine & Supply LLC
 BOBBIN WINDER 19

NO. PLATE NAME

41448 7804 Bobbin Winder, Nos. 2269, 41439 to

41447, two 4784 and three wood screws
1 in. No. 7

THREAD UNWINDER PARTS

27555 3582 Spool Pin

41450 3582 " Rest
41451 " " 41450 with 138b and 27555...
138b 3583 " " Set Screw
27557 3582 " Stand with 138b
41514 3582 " Weight, 4 in. diam., with 41515. ..
41515 3583 " " Centre Pin
2102 3583 Tension Disc
1560c 3583 " Regulating Thumb Nut
828c 7801 " Screw Stud
2103 3583 " Spring
5769 3583 " Thread Eyelet
17547 7801 " " Guard
60608 3582 Thread Guard
27560 3582 " " Rod, 26 in. long
138b 3583 " " " Set Screw
330d 3583 " " Set Screw
60609 Thread Guard complete, Nos. 330d, 828c,
1560c, 2103, 5769, 17547, 60608 and
two 2102
41454 3582 Thread Unwinder complete, for one large
spool, Nos. 27557, 27560, 41451, 41514,
60609 and three wood screws IJ^ in.
No. 12
4J449 Bobbin Winder (swinging automatic, right
hand) complete, Nos. 41448 and 41454

KNEE LIFTER PARTS

(PQWER TABLE)

NO. PLATE NAME

5871 3638 Bell Crank
13253 " " 5871 with 5599 and 5601
5599 3638 " " Bracket
178b 691 " " " Screw
5601 3641 " " Hinge Pin
5735 3641 " " Spring
6872 3638 Bell Crank complete, Nos. 5735 and
13253

From the library of: Superior Sewing Machine & Supply LLC
 20 KNEE LIFTER PARTS

NO. PLATE NAME

4724 3638 Lifting Lever with 448c

4728 3638 " " Connecting Rod
12416 3641 " Joint
76d 601 " " Hinge
Screw •
1521E 693 Lifting Lever Connecting Rod Lock Nut.
802d 691 " " Hinge Screw
4727 695 " Pin
448c 691 " " " Set Screw
5772 3628 Rock Shaft
7539 3628 " " Hanger with two wood screws
1 in. No. 10
2765 3628 Rock Shaft Knee Arm
2768 Rock Shaft Knee Arm complete, Nos.
2765 to 2767
2766 3628 Rock Shaft Knee Arm Hub with 356c...
356c 693 " " " " " Set Screw...
2767 3628 " Plate with 356c
356c 693 " Set Screw
6337 3628 " " Lifting Bracket with two 356c
12243 3628 Hook
356c 693 " " " " " Set
Screw
356c 693 Rock Shaft Lifting Bracket Set Screw...
2770 3628 " " Stop Dog with 356c
356c 693 " " Set Screw
5773 3628 Rock Shaft complete, Nos. 2768, 2770,
5772, 6337, 12243 and two 7539
5874 Knee Lifter complete, Nos. 76d, 802d,
1521e, 4724, 4727, 4728, 5773, 5872,
12416 and two 178e

KNEE LIFTER PARTS

(STAND)

NO. PLATE NAME

5871 3638 Bell Crank

13253 " " 5871 with 5599 and 5601
5599 3638 " Bracket
178e 691 Screw
5601 3641 " Hinge Pin
5735 3641 " " Spring
5872 3638 Bell Crank complete, No.s. 5735 and 13253
4724 3638 Lifting Lever with 44Sc
4728 3638 " " Connecting Rod

From the library of: Superior Sewing Machine & Supply LLC
 KNEE LIFTER PARTS 21

NO. PLATE NAME

12416 3641 Lifting Lever Connecting Rod Joint

76d 691 " " " " " Hinge
Screw
1521e 693 Lifting Lever Connecting Rod Lock Nut.
802d 691 " " Hinge Screw
4727 695 " " Pin
448c 691 " " " Set Screw
5772 3628 Rock Shaft
7539 3628 " " Hanger with two wood screws
1 in. No. 10
2765 3628 Rock Shaft Knee Arra
2768 Rock Shaft Knee Arm complete, Nos.
2765 to 2767
2766 3628 Rock Shaft Knee Arm Hub with 356c. ..
356c 693 " " " " " Set Screw...
2767 3628 " " " Plate with 356c
356c 693 " " " " Set Screw
6337 3628 " " Lifting Bracket with two 356c
2778 3628 " " " " Hook
356c 693 " " " " " Set
Screw
356c 693 Rock Shaft Lifting Bracket Set Screw. . .
2770 3628 " " Stop Dog with 356c
356c 693 " " " " Set Screw
5875 Rock Shaft complete, Nos. 2768, 2770,
2778, 5772, 6337 and two 7539
5877 Knee Lifter complete, Nos. 76d, 802d,
1521e, 4724, 4727, 4728, 5872, 5875,
12416 and two 178e

STAND
ROCKING TREADLE

NO. PLATE NAME

25133 7802 Band Wheel (two speed) 10 in. and 12 in.

diam., with 2117 and 25010
25010 7802 Band Wheel Crank
2117 695 " " " Pin
297c 692 " " " Screw Centre
46629 " " " " " 297c with
1507r
1507r 693 Band Wheel Crank Screw Centre Nut.. .
25136 Belt, size -Ain., length in., with 25029
25029 695 " Hook
46667 Brace
82985 5216 " 46667 with three 46629

From the library of: Superior Sewing Machine & Supply LLC
 22 STAND

NO. PLATE NAME

46662 7803 Brace (sectional) complete, Nos. 46528,
46663 and three SSOii
46528 7803 Brace Section (left) with 46629
46663 7803 " " (right) with two 46629....
880r 7S01 " " Screw
748r 7801 " Screw
82973 5216 Leg
25123 Pitman Adjusting Block
55Su 693 " " Screw
157011 693 " " " Nut
25075 695 " " " Washer
25074 7802 Pitman (adjustable) complete with two
each 5.58r, 1570r, 25075 and 25123...
7958 695 Pitman Pin
11742 695 " Washer
250S2 7802 Treadle
297c 692 " Screw Centre
46629 " " " 297c with 1507r...
1507« 693 " " " Nut
2.5086 7802 Wrench for 1507
25287 Stand (iron work) complete, Nos. 7958,
11742, 25074, 250S2, 25086, 25133,
82985, two 82973 and foui' 748u

TRIMMINGS FOR END AND

BACK LEAF TABLE
NO. PLATE NA.MK
25001 7802 Back Leaf Bracket with two wood screws
1 in. No. 10
25002 7802 Back Leaf Scroll Bracket with in.
No. 9 and two 1 in. No. 12 wood screws
25003 7S02 Back Leaf Sliding Hinge, Nos. 25149,
three 25151 and six wood .screws in.
No. 8
25151 7802 Back Leaf Sliding Hinge Plate
25149 7802 " " " " Rod
25057 7802 End Leaf Support complete, Nos. 25143,
25168, 25169 and two wood screws ^
in No. 7
25168 End Leaf Support Bracket
25060 7802 " " " Button with wood screw
IM in. No. 12 R. H. B
25169 End Leaf Support Lever
25143 695 " " " " Hinge Pin
124535 Machine Cushion (rubber)
124.537 7808 " " 124535 with 124536 ...
124.530 " " Tack

From the library of: Superior Sewing Machine & Supply LLC
 23

OBSOLETE PARTS
NO. PLATE NAME

566c 692 Crank Connecting Rod Hinge Screw, use

565c
5791 3629 Face Plate for 8174
8174 " " 5791 with 2105, for 8178
8178 Face Plate complete, Nos. 233d, 448c,
2108, 2127, 5797, 5989, 5991 and 8174,
use 132.56
2108 3636 Face Plate Thread Guard for 8178
5994 3639 Feed" Bar
5995 3640 " Dog, for leather, 8 teeth
5855 3640 " " 8 teeth (10 teeth to the inch).
5891 " " 11 teeth
5895 " " 19 teeth
5998 3639 " Lifting Rock Shaft Crank with 1813
and two 172e
5847 3639 Feed Lifting Rock Shaft Crank with 1813
and two 172e, use 8154
172b 691 Feed Lifting Rock Shaft Crank Clamping
Screw
58e 691 Feed Regulator Hinge Screw
3041 Feed Rock Shaft complete, Nos. 3042 and
3043, use 56880
3043 3632 Feed Rock Shaft Crank with 462c, for
3041
462c 3632 Feed Rock Shaft Crank Set Screw for 3043
3130 3641 Guide Bar Driving Crank with 1862 and
3131
626c 693 Guide Bar Lifting Bracket Guide Screw
Stud
3054 3639 Lifting Presser Bar
2359c 695 " " " Lifter
4855 3641 " " " "
3100 3630 " " " Spring, use 32675. ..
5792 3640 " " Foot
8156 3640 " " "
•3098 3641 Needle Bar Connecting Link with 390e. .
56847 " " " " 3098 with
15472
2305 695 Needle Bar Connecting Stu<l with 155c,
use 15472
5834 3639 Oscillating Shaft
12093 685 Shuttle Cylinder
56514 " " 12093 with 773f and
12095
12095 685 Shuttle Tension Spring

From the library of: Superior Sewing Machine & Supply LLC
 24 OBSOLETE PARTS

NO. PLATE NAME

6751 685 Shuttle (cylinder) 2^4 i"- diam., complete,

Nos. 8162, 12000, 14535 and 56514,
use 8189
8187 3634 Shuttle Cylinder for 8194
8194 " " 8187 with 773p and
8188, for 8189
12000 685 Shuttle Cj-linder Hinge Pin for 8162
13260 7808 " " " " 13265...
12001 685 " " Latch for 8162
12002 685 " " Pin for 8162
11854 3634 " " " Spring for 8162. .
590d 692 " Screw for
8162
8188 3634 Shuttle Tension Spring for 8194
8189 3634 " (cylinder) 2j4 in. diam. complete,
Nos. 8162, 8194, 12000 and 14535, use
13265
6751 685 Shuttle (cylind'='i) 2H in. diam., complete,
Nos. 8162, 12000, 14535 and 56514,
use 8189
5938 3639 Shuttle Race Back
741d 691 " " " Spring Screw
5755 3639 " Body
5760 3641 " Cap (left)
5756 3641 " " (right)
5790 3641 " " Dowel Pin
5754 Shuttle Race comjdete, Nos. 741d, 5755,
5756, 5760, 5938, 5939 and two each
21'"'n, 5790 and 5965, u.se 5841
129e 691 Shuttle Race Frame Clamping Screw....
145d 691 " " Screw
240d 691 " " Slide Spring Sci'ew
2102 685 TeiLsion Disc
76c 691 Thread Take-up Lever Hinge Screw
5889 Throat Plate for 5891 and 5895
602d 691 Vibrating Pres.ser Bar Hinge Cap Screw..
3135 3641 " Lifting Bell Crank
« <( « (1 (( It
602d 691
Hinge Cap Screw
5794 3640 Vibrating Presser Foot

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL

LIST

OF PARTS

From the library of: Superior Sewing Machine & Supply LLC
 25

NUMERICAL UST OF PARTS

NO. PLATE NAME
35d 7801 Bobbin Winder Stop Latch Hinge Screw
for 27649
46d 691 Bobbin Winder Frame Hinge Screw for
5762
5Se 691 Feed Regulator Hinge Screw, obsolete...
76d 691 Lifting Lever Connecting Rod Joint
Hinge Screw for 587^ and 5877
76c 691 Thread Take-up Lever Hinge Screw,
obsolete
123e 691 Arm Screw
129e 691 Shuttle Race Frame Clamping Screw,
obsolete
135d 691 Oil Cup Screw
136p 691 Driving Flange Latch Hinge Screw for
5993
138b 3583 Thread Unwinder Spool Rest Set Screw
for 41451
138b 3583 Thread Unwinder Thread Guard Rod
Set Screw for 27557
141d 3636 Shuttle Race Screw
144d 691 Arm Shaft Screw
145d 691 Shuttle Race Screw, obsolete
155c 691 Needle Bar Connecting Stud Set Screw
for 2305 and 15472
155c 3583 Bobbin Winder Pulley Set Screw for 41443
157e 691 Feed Lifting Rock Shaft Crank Fork
Clamping Screw for 5997
157j 691 Feed Rock Shaft Crank Set Screw for
29633
158e 691 Crank Connecting Rod Cap Screw for 5969
159d 691 Bobbin Winder Bracket Screw
172e 691 Feed Lifting Rock Shaft Crank Clamping
Screw for 5847 and 5998, obsolete
175d 691 Face Plate Screw
176d 3583 Bobbin Winder Tripping Arm Clamping
Screw for 41447
178e 691 Bell Crank Bracket Screw for 5874 and
5877
181d 5830 Binder Edge Guide Screw for 120061....
190d 691 Bobbin Winder Spring Screw for 5762...
190d 691 Corder Cord Guide Screw for 28329 and
120207
190d 691 Oscillating Shaft Crank Roller Cap Screw
for 1885
191c 691 Feed Dog Screw
193d 691 Lifting.Presser Foot Screw

From the library of: Superior Sewing Machine & Supply LLC
 26 NUAIERICAL LIST OF PARTS

NO. PLATE NAME

196f 3632 Needle Clamp Screw for 4265
21 Id 692 Oil Cup Pad Screw for 5781
217f 691 Vibrating Presser Foot Screw
219d 691 Shuttle Race Cap Screw (large) for 5754
and 8193
229d 7808 Shuttle Cylinder Latch Screw for 13263..
233d 691 Face Plate Thread Guard Screw for 13256
233d 691 Thread Take-up Spring Regulator Plate
Screw for 8178
240d 691 Shuttle Race Slide Spring Screw, obsolete
262j 692 Pressure Regulating Thumb Screw
2S6d 692 Arm Side Cover Thumb Screw
286d 692 Binder Guide Thumb Screw for 36344,
120061, 120247 and 120248
297c 692 Band Wheel Crank Screw Centre for 46629
297c 692 Treadle Screw Centre for 46629
304c 692 Feed Rock Shaft Screw Centre
313c 692 " Bar Screw Centre
330d 692 Driving Flange Latch Spring Screw for
5993
330d 3583 Thread Unwinder Thread Guard Set
Screw for 60609
333d 692 Bobbin Winder Friction Wheel Washer
Screw for 5809
337d 692 Vibrating Presser Bar Spring Screw for
56844
356c 693 Rock Shaft Knee Arm Hul) Set Screw for
2766
356c 693 Rock Shaft Knee Plate Set Screw for 2767
356c 693 " " Lifting Bracket Hook Set
Screw for 6337
356c 693 Rock Shaft Lifting Bracket Set Screw for
6337
356c 693 Rock Shaft Stop Dog Set Screw for 2770
375c 692 Feed Connecting Link Hinge Screw
375c 692 " Forked Connection Hinge Screw...
390e 692 Needle Bar Connecting Link Adjusting
Screw for 3098 and 4898
401e 7801 Throat Plate Needle Hole Strip Screw for
5867, 5881 and 8199
404d 692 Guide Bar Lifting Bracket Screw for 4730
418e 693 Bobbin Winder Tension Screw Stud for
27308
418d 693 Thread Retainer Screw Stud for 5989
435c 691 Driving Flange Set Screw for 5978
446c 691 Feed Cam Set Screw for 3032
446c 691 Thread Take-up Cam Set Screw for 5793
448c 691 Arm Shaft Bushing (back) Set Screw....

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 27

NO. PLATE NAME

448c 691 Balance Wheel Set Screw for 3011

448c 691 Lifting Lever Pin Set Screw for 4724....
448c 691 Tension Stud Set Screw for 8178
453c 692 Oscillating Shaft Collar Set Screw for 5917
453c 692 " " Crank Set Screw for 6000
457c 7798 Corder Cord Guide Bed Leveling Screw
for 120206
458c 3583 Bobbin Winder Frame Hinge Pin Set
Screw for 41439
462c 3632 Feed Rock Shaft Crank Set Screw for
3043, obsolete
558r 693 Pitman Adjusting Screvi?for 25074
565c 7808 Crank Connecting Rod Hinge Screw
566c 692 Crank Connecting Rod Hinge Screw,
obsolete, use 565c
575e 3636 Shuttle Race Frame Clamping Screw....
590d 692 " Cylinder Latch Spring Screw for
8162, obsolete
598c 691 Lifting Presser Bar Lifter Screw
602d 691 Vibrating Pre.sser Bar Hinge Cap Screw,
obsolete
602o 691 Vibrating Presser Bar Lifting Bell Crank
Hinge Cap Screw, obsolete
626c 693 Guide Bar Lifting Bracket Guide Screw
Stud, obsolete
635c 692 Oscillating Rock Shaft Hinge Pin Screw
Bearing for 8163
641e 691 Lifting Presser Bar Bracket Clamping
Screw for 3133
651d 692 Needle Clamp Thread Guide Screw for
4865
671d 5807 Binder Edge Guide Thumb Screw for
36344
690e 691 Guide Bar Driving Crank Wedge Adjust
ing Screw
725e 3636 Shuttle Race Slide Spring Screw for 5946.
741d 691 " " Back Spring Screw for 5754,
obsolete
742f 692 Throat Plate Screw
747d 3641 Guide Thumb Screw
748r 7801 Brace Screw for 25287
773p 692 Shuttle Tension Regulating Screw for
8194, 13259 and 56514
802d 691 Lifting Lever Hinge Screw for 5874 and
5877
810d 3633 Vibrating Pre«ser Bar Hinge Cap Screw
for 4730

From the library of: Superior Sewing Machine & Supply LLC
 28 NUMERICAL LIST OF PARTS

NO. PLATE NAME

810e 3633 Vibrating Presser Bar Lifting Bell Crank

Cap Screw for 4730
817c 693 Tension Stud for 5797
818d 692 Feed Regulator Thumb Screw
828c 7801 Thread Unwinder Tension Screw Stud for
60609
880b 7801 Brace Section Screw for 46662
933d 3634 Shuttle Race Back Spring Screw for 5841.
934J 3636 " " Cap Screw (small) for 8193.
1036c 7790 Binder Leveling Screw for 120242
1036c 7790 " « " (back) for 36340..
1044d 7798 Corder Cord Guide Arm Hinge Screw for
28329 and 120207
1054c 3632 Oscillating Shaft Crank Roller Screw
Stud for 1885
1088c 3636 Thread Take-up Lever Hinge Screw for
8159
1128e 3632 Feed Regulator Hinge Screw
1186e 3636 " Lifting Rock Shaft Crank Clamping
Screw for 8154
1266c 7801 Binder Leveling Screw (front) for 36340
1507r 693 Band Wheel Crank Screw Centre Nut for
46629
1507b 693 Treadle Screw Centre Nut for 46629....
1513J 693 Crank Connecting Rod Hinge Screw Nut
1513J 693 Feed Rock Shaft Screw Centre Nut
1513J 693 Oscillating Rock Shaft Hinge Pin Nut for
56812
1513J 693 Oscillating Rock Shaft Hinge Pin Screw
Bearing Nut for 8163
1513J 693 Oscillating Shaft Crank Roller Screw Stud
Nut for 6000
1518e 693 Feed Connecting Link Hinge Screw Nut
1518e 693 " Forked Connection Hinge Screw Nut
1519j 693 " Bar Screw Centre Nut
1521e 693 Lifting Lever Connecting Rod Lock Nut
for 5874 and 5877
1560c 693 Tension Regulating Thumb Nut for 5797
1560c 3583 Thread Unwinder Tension Regulating
Thumb Nut for 60609
1562J 693 Bobbin Winder Tension RegulatingThumb
Nut for 27308.
1562J 693 Thread Retainer Regulating Thumb Nut
for 5989 ".
1570b 693 Pitman Adjusting Screw Nut for 25074..
1620J 7801 Bobbin Winder Frame Hinge Screw Nut
for 27649

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 29

NO. PLATE NAME

1813 693 Feed Lifting Rock Shaft Crank Roller and

Stud for 5847, 5998 and 8154
1819 693 Thread Take-up Lever Roller and Stud
for 5758
1823 693 Lifting Presser Bar Bracket Roller and
Stud for 3133
1862 3633 Guide Bar Driving Crank Roller for 3130
and 4854
1885 693 Oscillating Shaft Crank Roller with 190d,
1054c and 5968, for 6000
2002 3636 Arm Dowel Pin
2022 3634 Shuttle Driver Pin
2049 3632 Feed Rock Shaft Crank Pin
2049 3632 OscQlating Shaft Crank Pin
2058 3630 Lifting Presser Bar
•2070 3632 " " " Spring Washer
2102 685 Tension Disc, obsolete
2102 3583 Thread Unwinder Tension Disc for 60609
2103 685 Tension Spring for 5797
2103 3583 Thread Unwinder Tension Spring for
60609
2105 3636 Tension Thread Guard for 8174 and 13255
2106 7801 Bobbin Winder Tension Thread Guide
for 27308
2108 3636 Face Plate Thread Guard for 8178,
obsolete
2117 695 Band Wheel Crank Pin for 25133
2127 3636 Thread Take-up Spring Regulator Plate
for 8178 and 13256
2269 3583 Bobbin Winder Stop Latch Pin for 41448
2305 695 Needle Bar Connecting Stud with 155c,
obsolete, use 15472
2359c 695 Lifting Presser Bar Lifter, obsolete
2361 3633 Vibrating Presser Bar Hinge Bracket for
56752
2362 3633 Vibrating Presser Bar Hinge Bracket
Rivet for 56752
2455 685 Bobbin Winder Tension Disc for 27308..
2455 685 Thread Retainer Disc for 5989.
Nos. 2765 TO 2767 for 2768
2765 3628 Rock Shaft Knee Arm
2766 3628 " Hub with 356c...
2767 3628 " " " Plate with 356c
2768 Rock Shaft Knee Arm complete for 5773
and 5875, Nos. 2765 to 2767
2770 3628 Rock Shaft Stop Dog with 356c, for 5773
and 5875 ...i...
2778 3628 Rock Shaft Lifting Bracket Hook for 5875

From the library of: Superior Sewing Machine & Supply LLC
 30 NUMERICAL LIST OF PARTS

NO. PLATE NAME

3005 3629 Arm Shaft Bushing (back)

3011 3628 Balance Wheel (two speed) 3 in. and 5 in.
pulleys with two 448c
3012 3636 Thread Take-up Cam Pin
3016 3630 Bed Hinge complete for 5992, Nos. 3017,
3018 and 3020
3017 Bed Hinge (half butt) for 5992, for 3016.
3018 " " " " " wood table, for
3016
3020 3641 Bed Hinge Pin for 3016
3021 3636 " Rivet for 5992
3032 3629 Feed Cam with 446c, for 13257
3033 3632 " Connecting Link
3037 3629 " Forked Connection
3039 3632 " Regulator
3041 Feed Rock Shaft complete, Nos. 3042 and
3043, obsolete, use 56880
3042 3628 Feed Rock Shaft for 3041 and 56880
3043 3632 " " " Crank with 462c, for
3041, obsolete
3052 3629 Oscillating Rock Shaft Hinge Pin for 56812
3054 3639 Lifting Presser Bar, obsolete
3094 3633 Guide Bar Driving Crank Wedge
♦3098 3641 Needle Bar Connecting Link with 390b,
for 56847, obsolete..
3100 3630 Lifting Presser Bar Spring, obsolete, use
32675
3126 3633 Guide Bar for 567.52
3130 3641 " " Driving Crank with 1862 and
3131, obsolete
3131 3633 Guide Bar Driving Crank Roller Cap for
3130 and 4854
3133 3632 Lifting Presser Bar Bracket with 641e
and 1823
3134 3633 Vibrating Presser Bar for 4730
3135 3641 " " " Lifting Bell Crank,
obsolete
3137 3633 Vibrating Presser Bar Spring for 56844
4264 3630 Needle Bar
4265 " Clamp with 196f, for 4865
4266 3632 " " Thread Guide for 4865...
4288 3629 Arm Side Cover
4347 3637 Wrench for 1513 and 1518 (Accessories)..
•4349 Crank Connecting Rod Cap for 5969....
4448 695 Arm Oil Tube, for intermediate bearing,
for 5801
•4449 Arm Shaft Bushing (front) for 5801
4723 3633 Gviide Bar Lifting Bracket for 4730

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 31
NO. PLATE NAME

4724 3638 Lifting Lever with 448c, for 5874 and 5877
4725 695 Lifting Presser Bar Lifting Bracket
4726 695 " Guide
Pin
4727 695 Lifting Lever Pin for 5874 and 5877
4728 3638 " " Connecting Rod for 5874
and 5877
4730 Guide Bar complete, Nos. 810d, 810e,
3134, 4723, 4897, 56844 and three 404d
4784 3583 Bobbin Winder Frame Oil Pad for 41448
4854 3633 Guide Bar Driving Crank with 1862 and
3131
4855 3641 Lifting Presser Bar Lifter, obsolete.
4865 3632 Needle Clamp complete, Nos. 651d, 4265
and 4266.
4897 3633 Vibrating Presser Bar Lifting Bell Crank
for 4730
*4898 3633 Needle Bar Connecting Link with 390e,
for 56764— ,
5599 3638 Bell Crank Bracket for 13253
5601 3641 " " Hinge Pin for 13253
5735 3641 " Spring for 5872
5751 685 Shuttle (cylinder) 2)4 in. diam., complete,
Nos. 8162, 12000, 14535 and 56514,
obsolete, use 8189
5752 685 Shuttle Frame for 8162
5754 Shuttle Race complete, Nos. 741d, 5755,
5756, 5760, 5938, 5939 and two each
219d, 5790 and 5965, obsolete, use 5841
5755 3639 Shuttle Race Body for 5754, obsolete....
5756 3641 " " Cap (right) for 5754, obsolete
*5758 3635 Thread Take-up Lever with 1819, for 8159
5759 3640 Throat Plate for 5855, 5995 and 13252.
5760 3641 Shuttle Race Cap (left) for 5754, obsolete
5761 3638 Bobbin Winder Spindle for 5809
5762 3638 Bobbin Winder complete, Nos. 46d, 190d,
5809, 5958 and 11114
5769 3583 Thread Unwinder Tension Thread Eyelet
for 60609
5772 3628 Rock Shaft for 5773 and 5875
5773 3628 Rock Shaft complete for 5874, Nos. 2768,
2770, 5772, 6337, 12243 and two 7539..
Nos. 5778 TO 5780 pgr 5781

5778 3629 Oil Cup

5779 695 " " Pad (felt)
5780 695 " " Thread Eyelet

From the library of: Superior Sewing Machine & Supply LLC
 32 NUMERICAL LIST OF PARTS

NO. PLATE NAME

6781 Oil Cup complete, Nos. 211d, 5778 to 5780

and 7071
5790 3641 Shuttle Race Cap Dowel Pin for 5754,
obsolete
5791 3629 Face Plate for 8174, obsolete
5792 3640 Lifting Presser Foot, obsolete
5793 3635 Thread Take-up Cam 8184 with 446c
5794 3640 Vibrating Presser Foot, obsolete
5795 3636 Tension Wheel with 6796, for 5797
•5796 " " Flange for 5795
Tension complete (wheel) for 8178 and
13256, Nos. 817c, 1560c, 2103, 5795 and
two each 5983 and 5984
*5801 Arm with 4448 and 4449
5804 3624 Throat Plate for 5856, for 35145
5809 Bobbin Winder Frame complete for 5762,
Nos. 333d, 5761, 5959 to 5961 and 5963
5811 695 Arm Spool Pin and Thread Eyelet
5814 3624 Vibrating Presser Foot for 5840 and 35145
5816 3631 Lifting Presser Foot
5833 3634 Shuttle Driver
5834 3639 Oscillating Shaft, obsolete
5839 3630 Feed Bar
5840 3647 Feed Dog, 12 teeth, for canvas work
5841 Shuttle Race complete, Nos. 933d, 5848,
5939 and 8193

Nos. 5842 TO 5845 for 8193

5842 3634 Shuttle Race Back Spring Rest Pin

5843 3635 " " Body
5844 3636 " " Cap (left)
5845 3636 " " " (right)
5847 3639 Feed Lifting Rock Shaft Crank with 1813
and two 172e, obsolete, use 8154
5848 3635 Shuttle Race B^k for 5841
5853 Throat Plate Needle Hole Strip for 5881
5855 3640 Feed Dog, 8 teeth (10 teeth to the inch)
obsolete
5856 3624 Feed Dog for 35145
5862 3618 Throat Plate for 5899
5865 " " Body for 5867
5866 3618 " " Needle Hole Strip for 5867.
5867 3618 Throat Plate complete for 8153« Nos. 5865,
5866 and two 401e
5871 3638 Bell Crank for 13253
5872 3638 Bell Crank complete for 5874 and 5877,
Nos. 5735 and 13253

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 33
NO. PLATE NAME

5874 Knee Lifter complete (power table) Nos.

76d, 802d, 1521e, 4724,4727,4728, 5773,
5872, 12416 and two 178e
5875 Rock Shaft complete, for 5877, Nos. 2768,
2770, 2778, 5772, 6337 and two 7539..
5877 Knee Lifter complete (stand) Nos. 76d,
802d, 1521e, 4724, 4727, 4728, 5872,
5875, 12416 and two 178e
5880 Throat Plate Body for 5881
5881 3647 Throat Plate complete for 5840, Nos.
5853, 5880 and two 401 e
5889 Throat Plate for 5891 and 5895, obsolete
5890 3631 Vibrating Presser Foot
5891 Feed Dog, 11 teeth, obsolete
5895 " " 19 teeth, obsolete
5899 3618 Feed Dog
5917 3634 Oscillating Shaft Collar with 453c
5938 3639 Shuttle Race Back for 5754, obsolete....
5939 3635 " " " Spring for 5754 and
5841
5943 3635 Shuttle Race Frame with 5944
5944 3636 " " " Steady Pin for 5943
5945 " " Slide for 5946
5946 3635 Shuttle Race Slide complete, Nos. 5945,
5947 and two 725e
5947 3635 Shuttle Race Slide Spring for 5946 •
5958 3638 Bobbin Winder Bracket for 5762

Nos. 5959 TO 5961 for 5809

5959 3638 Bobbin Winder Frame

5960 3638 " " Friction Wheel (leather).
5961 3638 " " " " Washer..
5963 3638 " " Spindle Flange for 5809..
5965 3634 Shuttle Rac5 Back Steady Pin for 5754
and 8193
5968 3632 Oscillating Shaft Crank Roller Cap Screw
Washer for 1885
5969 3630 Crank Connecting Rod with 4349 and two
158e
*5970 3629 Oscillating Rock Shaft with 11165, for
8163
5975 3627 Drip Pan (stand) with four wood screws
^ in. No. 5
5976 Drip Pan (power table) with four wood
screws ^ in. No. 5
5977 3628 Balance W^eel (two speed) for 6981

From the library of: Superior Sewing Machine & Supply LLC
 34 NUMERICAL LIST OF PARTS

NO. plate

Nos. 6978 TO 5980 pgr 5993

5978 3635 Driving Flange with two 435c

5979 3632 " " Latch
5980 3632 " " " Spring
5981 Loose Wheel Attachment complete, Nos.
5977 and 5993
5983 3636 Tension Washer (felt) for 5797
5984 3636 (steel) for 5797
5989 Thread Retainer complete for 8178 and
13256, Nos. 418d, 1562j, 10141 and two
2455
5991 3636 Thread Take-up Spring for 8178 and 13256
♦5992 Bed with two 3016 and six 3021
5993 Driving Flange complete for 5981, Nos.
136p, 330d and 5978 to 5980
5994 3639 Feed Bar, obsolete
5995 3640 " Dog, for leather, 8 teeth, obsolete..
5996 3630 " Lifting Rock Shaft
5997 3630 Feed Lifting Rock Shaft Crank Fork with
157e
5998 3639 Feed Lifting Rock Shaft Crank with 1813
and two 172e, obsolete
5999 Oscillating Shaft Crank for 6000
6000 3632 Oscillating Shaft Crank complete, Nos.
453c, 1513J, 1885 and 5999
6037 7798 Corder Cord Guide Bracket Rivet for
26796
6178 3628 Arm Shaft for 3011
6179 3628 " " 5977, for 13257
6337 3628 Rock Shaft Lifting Bracket with two 356c
for 5773 and 5875
7071 695 Oil Cup Pad Screw Washer for 5781
7539 3628 Rock Shaft Hanger with two wood screws
1 in. No. 10, for 5773 and 5875
7958 695 Pitman Pin for 25287
8153 7796 Feed Dog
8154 3630 Feed Lifting Rock Shaft Crank with 1813
and two 1186e
8156 3640 Lifting Presser Foot, obsolete
8159 Thread Take-up Lever 5758 with 1088c
8162 Shuttle Frame 5752 with 590d, 11854,
12001 and 12002, for 8189
8163 Oscillating Rock Shaft 5970 with 635c,
1513J and 56812
8166 3630 Oscillating Shaft
817.4 Face Plate 5791 with 2105, for 8178,
obsolete

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 35

NO. PLATE NAME

8178 Face Plate complete, Nos. 233d, 448r,

2108, 2127, 5797, 5989, 5991 and 8174,
obsolete, use 13256
*8184 Thread Take-up Cam for 5793, for 13257
8187 3634 Shuttle Cylinder for 8194, obsolete
8188 3634 " Tension Spring for 8194, obsolete
8189 3634 Shuttle (cylinder) 2J^ in. diam., complete,
Nos. 8162, 8194, 12000 and 14535,
obsolete, use 13265
8190 3631 Feed Dog
8191 3631 Lifting Presser Bar Lifter
8192 3631 Throat Plate for 8190
8193 Shuttle Race Body 5843 with 5842, 5844,
5845 and two each 219d, 934j and 5965,
for 5841
8194 Shuttle Cylinder 8187 with 773f and 8188,
for 8189, obsolete
8196 3647 Feed Dog
8197 Throat Plate Body for 8199
8198 3647 " " Needle Hole Strip for 8199
8199 3647 Throat Plate complete for 8196, Nos.
8197, 8198 and two 401p
8879 7801 Arm Spool Pin Washer (cloth)
10141 685 Bobbin Winder Tension Spring for 27308
10141 685 Thread Retainer Spring for 5989
11114 3638 Bobbin Winder Spring for 5762
11165 695 Oscillating Rock Shaft Oil Pad for 5970
11241 7800 Bobbin Winder Spool Washer (cloth) for
27308
11742 695 Pitman Washer for 25287
11854 3634 Shuttle Cylinder Latch Spring for 8162..
12000 685 " " Hinge Pin for 5751 and
8189, obsolete
12001 685 Shuttle Cylinder Latch for 8162, obsolete
12002 685 " " . " Pin for 8162, ob
solete
12093 685 Shuttle Cylinder for 56514, obsolete
12095 685 " Tension Spring for 56514, obsolete
12243 3628 Rock Shaft Lifting Bracket Hook for 5773
12296 3636 Thread Eyelet (side of arm)
12416 3641 Lifting Lever Connecting Rod Joint for
5874 and 5877
13252 3647 Feed Dog, 14 teeth (18 teeth to the inch)
13253 Bell Crank 5871 with 5599 and 5601, for
5872
13254 7807 Face Plate for 13255
13256 " « 13254 with 2105, for 13256...

From the library of: Superior Sewing Machine & Supply LLC
 36 NUMERICAL LIST OF PARTS

NO. PLATE NAME

13256 Face Plate complete, Nos. 448c, 2127,

5797, 5989, 5991, 13255, 56870 and two
233d
♦13257 Arm Shaft 6179 with 3032 and 8184
13258 7809 Shuttle Cylinder for 13259
13259 « " 13258 with 773p and
13264, for 13265
13260 7808 Shuttle Cylinder Hinge Pin for 13265, ob
solete
13261 7808 Shuttle Cylinder Latch for 13263
13262 7809 " Frame for 13263
13263 " " 13262 with 229d and
13261, for 13265
13264 7808 Shuttle Tension Spring for 13259
13265 7809 Shuttle (cylinder) 2^ in. diam., complete,
Nos. 13259, 13263, 13266 and 14535...
13266 7808 Shuttle Cylinder Hinge Pin for 13265
14535 685 Shuttle Bobbin for 5751, 8189 and 13265
15072 7801 Bobbin Winder Bobbin Position Pin for
27330
15472 3633 Needle Bar Connecting Stud with 155c,
for 56764 and 56847
17547 7801 Thread Unwinder Tension Thread Guard
for 60609
25001 7802 Back Leaf Bracket with two wood screws
1 in. No. 10 (Trimmings for End and
Back Leaf Table)
25002 7802 Back Leaf Scroll Bracket with ^ in.
No. 9 and two 1 in. No. 12 wood screws
(Trimmings for End and Back Leaf
Table)
25003 7802 Back Leaf Sliding Hinge, Nos. 25149,three
25151 and six wood screws ^ in. No. 8
(Trinunings for End and Back Leaf
Table)
25010 7802 Band Wheel Crank for 25133
25029 695 Belt Hook for 25136
25057 7802 End Leaf Support complete, Nos. 25143,
25168, 25169 and two wood screws ^
in. No. 7 (Trimmings for End and Back
Leaf Table)
25060 7802 End Leaf Support Button with wood
screw IH in. No. 12 R. H. R. (Trim
mings for End and Back Leaf Table)..
25074 7802 Pitman (adjustable) complete, with two
each 558n, 1570r, 25075 and 25123, for
25287
25075 695 Pitman Adjusting Screw Washer for 25074

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 37

NO. PLATE NAME

25082 7802 Treadle for 25287

25086 7802 Wrench for 1507 and 1510, for 25287....
25123 Pitman Adjusting Block for 25074
25133 7802 Band Wheel (two speed) 10 in. and 12 in.
diam., with 2117 and 25010, for 25287
25136 Belt, size iftr in., length 62J^ in., with
25029, for 25287.
25143 695 End Leaf Support Lever Hinge Pin for
25057
25149 7802 Back Leaf Sliding Hinge Rod for 25003..
25151 7802 « " " " Plate for 25003.
25168 End Leaf Support Bracket for 25057
25169 « " " Lever for 25057
25287 Stand (iron work) rocking treadle, com
plete, Nos. 7958, 11742, 25074, 25082,
25086, 25133, 82985, two 82973 and
four 748k
25868 3637 Guide
26026 3637 Screw Driver, large (Accessories)
26485 3637 Screw Driver, small (Accessories)
26795 7798 Corder Cord Guide for 28329 and 120207
26796 7798 " " " Arm with 26798 and
three 6037, for 28329 and 120207.
26798 7798 Corder Cord Guide Bracket for 26796
26800 7797 Piping Attachment on Shank
26996 7796 Lifting Presser Foot with stitch set
27056 3637 Machine Button with wood screw '1% in.
No. 14 R. H. B. (Accessories)
27303 7801 Bobbin Winder Frame Spring for 27649..
27306 7800 " " Spool Pin for 27308
27307 7800 « " Stand for 27308...
27308 7800 Bobbin Winder Spool Stand complete for
27549, Nos. 418e, 1562j, 2106, 10141,
11241, 27306, 27307 and two each 2455
and wood screws 1 in. No. 10
27330 7800 Bobbin Winder Spindle with 15072, for
27649
27331 7800 Bobbin Winder Stop Latch for 27649
27627 7800 " " Frame for 27649
27540 7800 " " Ba^ for 27649
27541 7800 « " Pulley for 27649
27549 Bobbin Winder (swinging automatic,
right hand) complete for 14535, Nos.
27308 and 27649
27555 3582 Thread Unwinder Spool Pin for 41451...
27557 3582 " " " Stand with 138b,
for 41454

From the library of: Superior Sewing Machine & Supply LLC
 38 NUMERICAL LIST OF PARTS

NO. PLATE NA&IE

27660 3582 Thread Unwinder Thread Guard Rod,

26 in. long, for 41454
27649 7800 Bobbin Winder for 27549, Nos. 35d, 1620j,
27303, 27330, 27331, 27527, 27540,
27541, 50356d and two wood screws
1 in . No. 7
27916 3583 Bobbin Winder Brake (leather) for 41439
28084 3583 " " " Rivet for 41439...
28306 7797 Vibrating Presser Foot for 283.07
28307 7797 Binder on Shank
28314 3603 Lifting Presser Foot, for covering cord
with thin leather
28315 3603 Vibrating Presser Foot for covering cord
with thin leather
28317 3603 Throat Plate (grooved) for 35291, for
covering cord with thin leather
28323 7796 Lifting Presser Foot with teeth on bottom
of bend of toe part
28324 7796 Vibrating Presser Foot with teeth on
bottom of bend of forked part
28325 3608 Lifting Presser Foot for 28329
28326 3608 Vibrating Presser Foot for 28329
28328 3608 Corder Cord Guide Bed for 28329
28329 3608 Corder (adjustable) complete, for buggy
cushions, Nos. 190d, 1044d, 26795,
26796 and 28328
28333 7799 Hemmer on Shank
28894 3612 Binder on Shank, for carpets
29633 Feed Rock Shaft Crank with 157j, for
56880
32675 7808 Lifting Presser Bar Spring.
35144 3624 Binder on Shank for 35145
35145 Binder complete, for patent leather or
drill strip, to turn top edge under, for
carpets, Nos. 5804, 5814, 5816, 5856
and 35144
35291 3603 Feed Dog (grooved) for covering cord
with thin leather
35364 7796 Lifting Presser Foot for 120061,120247
and 120248 '.
35365 7796 Vibrating Presser Foot for 120061,120247
and 120248
36013 5708 Hemmer on Shank, for ]/i in. to in.
hem, for canvas
36014 Hemmer on Shank, for % in. to 2 in.
hem, for canvas
36015 5708 Feed Dog for 36013 and 36014
36016 5708 " " " 36015

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 39

NO. NAME

36111 7797 Piping Attachment

36340 6807 Binder Bed with two each 1036c and
1266c, for 36344 and 120061
36341 6807 Binder Edge Guide for 36344
36342 6807 " Guide (lower) for 36344
36343 6807 " " (upper) for 36344
36344 6807 Binder (adjustable) complete, for leather
binding, for canvas bags, leggings, etc.,
Nos. 286d, 671d and 36340 to 36343...
36345 7796 Lifting Presser Foot for 36344
36346 7796 Vibrating Presser Foot for 36344
41398 3683 Bobbin Winder Bobbin Carrier Key for
41444
41400 3637 Machine Rest Pin, wood (Accessories)
Nos. 41439 TO 41447 Foa 41448

41439 7804 Bobbin Winder Base with 458c, 27916

and two 28084
41440 3681 Bobbin Winder Frame
41441 3681 " Hinge Pin
41442 3681 Bobbin Winder Frame Spring
41443 3681 " " Pulley with 166c
41444 7804 " " Spindle with 41398
41446 7804 " " Stop Latch
41446 7804 " " " " Hinge Pin...
41447 3681 " " Tripping Arm with 176d .
41448 7804 " " for 41449, Nos. 2269,
41439 to 41447, two 4784 and three
wood screws i in. No. 7
41449 Bobbin Winder (swinging automatic,
right hand) complete, for 14636, Nos."
41448 and 41454
41460 3682 Thread Unwinder Spool Rest for 41461. .
41461 " 41460 with
138b and 27665, for 41464
41454 3682 Thread Unwinder complete, for one large
spool, for 41449, Nos. 27557, 27660,
41461, 41614, 60609 and three wood
screws in. No. 12
41614 3682 Thread Unwinder Spool Weight, 4 in.
diam., with 41616, for 41454
41616 3683 Thread Unwinder Spool Weight Centre
Pin for 41614
41644 6830 Binder Edge Guide Screw Washer for
120061
46528 7803 Brace Section (left) with 46629, for 46662
46629 Band Wheel Crank Screw Centre 297c
with 1607j, for 46663 and 82986

From the library of: Superior Sewing Machine & Supply LLC
 40 NUMERICAL LIST OF PARTS

NO. PLATE NAME

46629 Treadle Screw Centre 297c with 1607j,

for 46528, 46663 and 82985
46662 7803 Brace (sectional) complete for 25287, Nos.
46528, 46663 and three 880k
46663 7803 Brace Section (right) with two 46629, for
46662
46667 Brace for 82985
50356D 7801 Bobbin Winder Frame Hinge Screw for
27649
56514 Shuttle Cylinder 12093 with 773p and
12095, for 5751, obsolete
56752 Guide Bar 3126 with 2361 and two 2362,
for 56844
56764 Needle Bar Connecting Link 4898 with
15472
56812 Oscillating Rock Shaft Hinge Pin 3052
with 1513j, for 8163
56844 Guide Bar 56752 with 337d and 3137, for
4730
56847 Needle Bar Connecting Link 3098 with
15472, obsolete
56870 7808 Face Plate Thread Guard for 13256
56880 Feed Rock Shaft complete, Nos. 3042 and
29633
60608 3582 Thread Unwinder Thread Guard for 60609
60609 Thread Unwinder Thread Guard complete
for 41454, Nos. 330d, 828c, 1560c, 2103,
5769, 17547, 60608 and two 2102
82973 5216 Leg for 25287
82985 5216 Brace 46667 with three 46629, for 25287.
Nos. 120058 TO 120060 for 120061
120058 5830 Binder Edge Guide
120059 5830 " Guide (lower)
120060 5830 " (upper)
120061 5830 Binder (adjustable) complete, for in.
to in. leather binding, for short
curves, Nos. 181d, 286d, 36340, 41544
and 120058 to 120060
120099 7797 Lifting Presser Foot for 26800
120100 7797 Vibrating Presser Foot for 26800
120206 7798 Corder Cord Guide Bed with 457c, for
120207
120207 7798 Corder (adjustable) complete, for short
turns on cushions, Nos. 190o, 1044d,
26795, 26796 and 120206
120242 7790 Binder Bed with 1036c, for 120247 and
120248

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 41

NO. PLATE NAME

120243 7791 Binder Folder (lower) for 120248

120244 7790 " " (upper) for 120247 and
120248
120245 7790 Binder Guide (centre) for 120247 and
120248
120246 7790 Binder Guide (lower) for 120247
120247 7790 Binder (adjustable) complete, to turn in
upper edge only, for light or medium
weight material, Nos. 286d, 120242 and
120244 to 120246
120248 7791 Binder (adjustable) complete, to turn in
both edges, for light or medium weight
material, Nos. 286d and 120242 to
120245
120293 7798 Lifting Presser Foot (grooved) for 120207
120294 7798 Vibrating Presser Foot (grooved) for
120207....
120342 3637 Oiler (copper plated) With 120343 (Acces
sories)
120343 3637 Oiler Spout, 3J^ in. long, for 120342
124535 Machine Cushion (rubber) for 124537
124536 Machine Cushion Tack for 124537
124537 " " 124535 with 124536
(Trimmings for End and Back Leaf
Table)

Genuine Singer Needles and their Con

tainers are marked with the Company's
Trade Mark "SIMANCO." 1

Needles in Containers marked

"For Singer Machines"
are not Singer made needles.

From the library of: Superior Sewing Machine & Supply LLC
 ILLUSTRATIONS

OF

PARTS

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 685-FULL SIZE

5751

I2G93

575S 14535

12001

12000

isooe

2455 IQI4I

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 691-FaLL SIZE

liBBiiL

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 692-PULL SIZE

5Se 37B 377 634 742

0fiDnLLDXj i [111

!k

Innninr^

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 693-FULL SIZE

II

3 15

•m

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 695-PULL SIZE

7071

5811 444B 4727 25143 2117 4726 7958 5780 25075

W (742

lltGS

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3581-ONE.HALr SIZE
41443 41447

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3582-ONE-FOURTH SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3583-FXrLL SIZE

28084 27916 4784 |55 176 458

f M H W V •
IT
41553 41551 449 2269 41398 330

PI H • I I t

41515 138 5769

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3603-FULL SIZE

28315 28315

28314 28317

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3608—FULL SIZE
nuil^n yirf
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3612—FULL SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3618-PULL SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3624r-PULL SIZE

35144

58 6

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 8627-ONE EOTJRTH SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3628-ONE-FOUIlTH SIZE

V.

12243 P
7539 02765

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3629-ONE-HALr SIZE

5791

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3630-ONE-HALF SIZE

^6 8166 4264 2058 3100 5969

5839

6154

3016

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3631-FULL SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3632-FULL SIZE

liL

.-SS

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3633-FTJLL SIZE

From the library of: Superior Sewing Machine & Supply LLC
 r PLATE 3634-FULL SIZE

8189
11854

5842

5833 2022 5965

933

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3635-ONE.HALF SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3636-FXJLL SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3637-ONE.HALF SIZE

120342 41400 26485 26026

20343

27056

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3638-ONE-HALF SIZE

5599 5872 5871

4724

niu

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3639-ONE-HALr SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3640-FirLL SIZE

# -

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3641-EULL SIZE

5760 5756 4855

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 3647-FULL SIZE

8199 8196

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 5216-ONE-NINTH SIZE
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 5708-FTJLL SIZE
IIULULL
KUllULLULLkuH.LL.^^

JUUUiy:'
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 5807-FUIL SIZE
From the library of: Superior Sewing Machine & Supply LLC
 ^
PLATE 5830-FULL SIZE
^
From the library of: Superior Sewing Machine & Supply LLC
 120247

120242
120246

From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7796-FULL SIZE

353(b5 SI53
35364

36345 36346 26996

23323 28324

From the library of: Superior Sewing Machine & Supply LLC
 r
PLATE 7797-FULL SIZE

3611

2foS00

120100 120099

From the library of: Superior Sewing Machine & Supply LLC
 120294- 120293
120207

26795 120206

26798

044 457 6037

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7799-FULL SIZE

From the library of: Superior Sewing Machine & Supply LLC
r

PLATE 7800-ONE-HALF SIZE

27331

27540
27308

27307

27541

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7801-FULL SIZE

746 880 50356 35

401 1266 1620

8679 27303 2106 15072

626 17547

• I ;, .*• I.'!'<«: ' '

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7802-ONE.NINTH SIZE
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7803-ONE-EIGHTH SIZE
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7804-0NE-HALF SIZE

41446

41439 4I44&

41444

£
41446

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7807-FULL SIZE

i3^54•

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7808-FTILL SIZE

56870 229 13266 13260 13264

32675 565

29633

3261

124537

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7809-FTJLL SIZE

13265

13262

13258

M-j

From the library of: Superior Sewing Machine & Supply LLC
 1

X-

4?j

From the library of: Superior Sewing Machine & Supply LLC
 * * iC

X--
From the library of: Superior Sewing Machine & Supply LLC
^•"c