Ramachandran.
I
ht Mechanical Instrument Technician
Contact Details CAREER SUMMARY
Mobile : +91 7540015172 A result Oriented & competent in mechanical
engineering professional offering over 20 years
chandran6312@gmail.com experience Including over 15+ years international
experience. In the Middle East, mainly in Maintenance of
Sivasubramania puram, rotating equipment, Turbines, Compressors, Pumps,
Koliyankulam (Po) Gearbox, FD&ID fan, Fin Fan, Blower, others. Seeking a
Challenging assignment as Mechanical Technician
Tirunelveli (Dist.)
(maintenance) - rotating equipment For a reputed firm
Tamil Nadu in the oil & gas, offshore, onshore or Related industry.
Pin-627124
Passport Details PROFESSIONAL EXPERIENCE
Passport No : V5166191 Working in KUWAIT OIL COMPANY (KOC) through ABJ
Date of Issue : 24/03/2022 Engineering as Mechanical technician in KUWAIT from
Valid up to : 23/03/2032 March 2019 to March 2024
Place of Issue : Kuwait Worked in KUWAIT OIL COMPANY (KOC) through
Nationality : Indian GULFSPIC as Mechanical technician in KUWAIT from
DOB : 19/04/1972 March 2018 to Feb 2019
Worked in SABIC through Jal international as Mechanical
Qualification technician in Saudi Arabia from Aug 2015 to Aug 2017
Worked in Qatar petroleum Offshore through DOPET as
DME – Diploma in Mechanical technician in QATAR from July 2008 to March
Mechanical Engineering 2015
(State Board of Technical Division)
Worked in SICON as Mechanical technician in LIBYA from
Dec 2005 to June 2008
Multilingual
Worked in ONGC Offshore through Thakkans Nakco as
English,Hindi,
H2S /Tamil, Malayalam
BA training conducted by Qatar International
Mechanical SafetyinCentre.
technician India from Sep 2000 to April 2005
SAFETY RELATED TRAINING PROGRAM
Basic offshore safety Induction and Emergency training conducted by Qatar
International training center.
Lifting and rigging safety awareness, Over Head Crane Operation and Manual lifting
safety awareness.
MSDS - Material Safety Data Sheet
Basic first AID arrangements
Personnel Survival Technique
OPITO
Fire Prevention and Fire Fighting
Permit Holder & Applicant
First Aider
Personal Safety and Socials responsibilities
MAINTENANCE ACTIVITIES
Performs preventive maintenance and corrective maintenance on Rotating
Equipment’s
Performs overhauls of Compressors, Pump, Gearbox, Fin fan,
Blower, Turbine Centrifuge, Oxygen pump, Mixer, Heat Exchanger, Relief
valve, etc.
Performs health checkups of rotating equipment (LLF- look, listen and feel)
Monitored alignment for a fin fan belt pulleys and adjusted belt tension.
Conducted alignment job on turbine / gearbox using reverse method.
Followed equipment symbols, line designation and instrumentation symbols.
Adept in routine preventive maintenance, anticipating problems before their
occurrence,
Expertise in planning routine, shutdown, & emergency maintenance activities,
Carry out day-to-day plant maintenance work independently.
Regularly upgraded and implemented best maintenance practices for improved
reliability.
Knowledge in troubleshooting of precision tools.
Prepare initial inspection reports for the rotating equipment refurbishment jobs.
Prepare special tools for the executing the daily work in an easy way.
Maintained high standards, reliable & efficient operating variables in handling
hazardous materials safely, implemented operating procedures, & ensured shift
activities are in line with HSE policy requirements.
OIL & GAS HAND EXPERINACE
CENTRIFUGAL COMPRESSOR:
Experience in all type of Preventive maintenance, Corrective maintenance,
Shutdown maintenance and breakdown maintenance jobs.
Inspection, Dismantling & Installation of Thrust bearings and Journal bearings (plain
and tilting pads types) with direct and pressurized lubrication systems.
Locate position of rotor assembly and proper installation of gas seals or oil film seal.
Respecting the Radial & minimum axial clearance between impellers and diaphragm
and delivery dimensions of volute.
Performing alignment between driver and driven units.
RECIPROCATING COMPRESSOR:
Experience in all type of Preventive maintenance, Corrective maintenance,
Shutdown maintenance and breakdown maintenance jobs.
Inspection, Dismantling & Assembling of crankshaft, connecting rod, cross head,
Gudgeon pin, piston rod, piston and cylinder.
Maintaining limited clearance of Main bearings, Big end and small end bearings with
direct or pressurized lubrication systems.
Refurbishment of Suction & Discharge valves, Unloader and renewal of cylinder liner
Check and replace the piston rings, rider/guider rings, stuffing box packing & wiper
rings
Check and adjust the Cross Head Shoe Clearance, TDC & BDC
Respecting the minimum deflection on piston rods
Performing alignment of Compressor with driver Equipment’s
GEAR BOX: (Step up & Step down) [Flender, Sundyne]
Experience in all type of Preventive maintenance, Corrective maintenance,
Bearing replacement, oil seal replacement, coupling replacement, Axial & radial float
checking, oil change, all clearance checking preventive maintenance job.
Checked backlash on a gearbox, teeth contact using engineering blue.
PUMP:
Having relevant experience in maintenance in all types of pumps such as centrifugal,
reciprocating & rotary pumps.
Obtaining a complete checklist of the dismantled equipment and keep a record of the
same.
inspect the condition of rotating parts namely shaft, sleeve, impeller, oil deflectors,
wearing, bearings, coupling and stationary parts such as casing stuffing box, distance
pieces and bearing housing.
Renewal of mechanical seals replacement of rotor checking wearing and throat bushes,
bearing clearances
Maintaining the required Radial & Axial float in multistage pumps
Checking the Stuffing box Squareness and concentricity using a dial gauge while pump
assembly.
Over hauling of reciprocating pump such as plunger pump & diaphragm pump
including renewal of plunger packing, oil seals, suction discharge valves checking &
servicing.
· Centrifugal pump:
Flowserve Centrifugal (Split & Volute) pumps
Begemann Centrifugal pumps
KSB (Split &Volute) pumps
Flowserve centrifugal pumps
Sulzer centrifugal pumps
Sundyne pumps
· Dosing pumps (Single Acting)
Milton Roy dosing pump(Diaphragm)
Seko dosing pump(Diaphragm)
Nikkiso dosing pump (Diaphragm)
TURBINE:
Experience in all type of Preventive maintenance, Corrective maintenance,
Shutdown maintenance and breakdown maintenance jobs.
Involved in minor, intermediate and major servicing and inspection.
Involved in Borescope inspection of internals.
Involved in replacement of replacement of combustion chamber, transition piece, liner,
bucket, blade inspection.
Performing cold and hot alignment
ALIGNMENT:
Rim and face method
Reverse indicator method
Laser method
FIN FAN:
Blade Inspection and Replacement, Blade angle checking(inclinometer),
Bearing Housing Inspection, Belt tightness checking (tension tester),
motor pulley & Fan pulley alignment (SKF alignment kit) ,
Belt replacement, and bearing replacement
STATIC EQUIPMENT HANDELED
HEAT EXCHANGERS:
Type
Shell and tube Heat exchanger.
Floating head heat exchanger
Fixed tube heat exchanger
U-tube heat exchanger
plate type exchanger,
Spading, Cover Dropping, Bundle Pulling, Tube cleaning by hydro jetting,
Leak check, Hydro Test of Shell and Tube, Plugging the Tube if damaged, Install the both
side covers with new gasket.
STEAM TRAP:
All Kind of Steam Trap Maintenance and Overhauling,
VALVE:
Testing all kind of relief valves, control valves and mechanical valves,
Overhauling of valve actuator,
Authorization for valves testing and documents works,
Safety relief valve servicing, lapping, Calibrations per API standard,
Attended training for testing all kind of relief valve and control valve,
Air Separation Unit O2 service valves testing and cleaning inspection,
Authorization for Ventil safety valves test machine and control valve test machine,
Certified training for O2 valve cleaning and testing.
Safety valve make:
Fukui, Dresser, Crosby, Bopp & Reuther, Swagelok.
Control valve make:
Flowserve, Metso, Fisher, Masoneilan
DECLARATION:
I hereby solemnly declare that all the information given above is true as per my
knowledge & belief.
[Ramachandran.I]
