19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

L L

NOTES: VALID UNLESS OTHERWISE SPECIFIED

1. GENERAL:
a. APPLICATION SPECIFICATION SEE: AS-34791-020
b. PRODUCT SPECIFICATION SEE: PS-34791-020
c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE CHART
d. SOLDERABILITY PER SMES-152
K e. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR K
PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300
f. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS
(COMPANY ID#13255)
12 CIRCUIT SMT USCAR HEADER 12 CIRCUIT SMT USCAR HEADER 12 CIRCUIT SMT USCAR HEADER g. FLAMMABILITY REQUIREMENT: PER ISO3795 OR GM3191
POLARIZATION OPTION A POLARIZATION OPTION B POLARIZATION OPTION C h. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B)

2. DESIGN - MATERIALS:
a. SHROUD (PLASTIC HOUSING): SPS 30% GF, 25% REGRIND MAX PER WEIGHT
J b. BLADES: J
BASE METAL: C260 BRASS
PLATING REQUIREMENTS:
TIN:
UNDERPLATING:
OVERALL NICKEL: 1.25 - 2.25 MICROMETERS
24CKT POLARIZATION OPTIONS SHOWN BELOW OVERPLATING:
OVERALL TIN: 2.5 - 4.0 MICROMETERS
ARE REPRESENTATIVE FOR 16 AND 20CKT GOLD:
H H
UNDERPLATING:
OVERALL NICKEL: 1.25 - 2.25 MICROMETERS
OVERPLATING:
CONTACT AREA: ELECTRODEPOSITED GOLD
MINIMUM 0.76 MICROMETERS HARD GOLD
PCB CONTACT AREA: ELECTRODEPOSITED TIN MATTE FINISH
MINIMUM 2.5 - 4.0 MICROMETERS

3. DESIGN - GEOMETRY:
G G
a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA
IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION
NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL.
b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 2009
c. GENERAL TOLERANCES: SEE TITLE BLOCK
24 CIRCUIT SMT HEADER 24 CIRCUIT SMT HEADER 24 CIRCUIT SMT HEADER d. EDGES AND UNDIMENSIONED DETAILS PER ISO13715
POLARIZATION OPTION A POLARIZATION OPTION B POLARIZATION OPTION C e. CORNERS SHOWN AS SHARP TO BE R 0.1 MAX
f. LETTERING SHALL BE BELOW SURROUNDING SURFACE OF PART.
F THIS INCLUDES RECYCLING CODE, PLANT AND CAVITY ID, F
VENDOR ID, AND CIRCUIT ID.

E E

D D

INSPECTION BALLON NUMBER LOG UPDATED INSPECTION LOG, CHANGED

PER DRAWING REVISION: W7 W7
DESCRIPTION, ADDED BASIC DIMS TO SHEET 2
W6 DELETED 34897-6164
C LAST BALLOON USED: 16 C
W5 ADDED DIM BALLOON 15 & 16
ADDED BALLOON NUMBERS: W4 ADDED 16CKT GOLD DEPOPULATED POL A P/N
W3 NX REMASTERING
REMOVED BALLOON NUMBERS: REV DESCRIPTION
QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS SCALE

2019/09/26
2019/09/26
2019/09/11
SYMBOLS GENERAL
TOLERANCES
= 0 (UNLESS SPECIFIED) MM ONLY 5:1
B DRWN BY DATE B
= 0 ANGULAR TOL ± 1.0 °
TMACHUGA 2011/11/23
= 0 4 PLACES ± MINI 50 DUAL ROW
CHK'D BY DATE
SMT HEADER ASSEMBLY SALES DRAWING
3 PLACES ±

-
= 0
2 PLACES ± 0.10

JDUNAJ
JDUNAJ
SRUSS
APPR BY DATE

624745
= 0 PRODUCT CUSTOMER DRAWING
1 PLACE ± 0.2
SMARCEAU 2011/12/19 SERIES MATERIAL NUMBER CUSTOMER
= 0 0 PLACES ±

DRWN:
EC NO:

CHK'D:
APPR:
DRAWING SIZE THIRD ANGLE PROJECTION
A A
34897 SEE CHART GENERAL MARKET
= 0 DRAFT WHERE APPLICABLE
MUST REMAIN
D DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER

REV
RELEASE STATUS RELEASE DATE
C = 0 W7 WITHIN DIMENSIONS
SD-34897-001 PSD 000 1 OF 5
FORMAT: master-tb-prod-D
REVISION: G
19
DATE: 2017/02/06 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

L L
12 CKT SMT USCAR HEADER 16 CKT SMT HEADER 20 CKT SMT HEADER 24 CKT SMT HEADER
7.50 9.50 11.50 13.50

�2.00� TYP �1.05� TYP �2.00� TYP �1.05� TYP �2.00� TYP �1.05� TYP �2.00� TYP �1.00� TYP �1.05� TYP
�1.00� TYP �1.00� TYP �1.00� TYP

K K

�2X 7.80� �2X 7.80� �2X 7.80� �2X 7.80�

�18.80� �18.80� �18.80� �18.80�
J J

H H
1
25.49 ±0.13
4 7 10
2 33.49 ±0.13 37.49 ±0.13
29.49 ±0.13
22.62 ±0.13
5 8 11
26.62 ±0.13 30.62 ±0.13 34.62 ±0.13

SEE DETAIL A
G G

F F
�2.00� TYP �2.00� TYP �2.00� TYP �2.00� TYP

2A 5A 8A 11A
20.40 ±0.10 C 24.40 ±0.10 C 28.40 ±0.10 C 32.40 ±0.10 C

3 6 9 12
+0.25 +0.25 +0.25 +0.25
27.05 31.05 35.05 39.05
-0.10 -0.10 -0.10 -0.10
E E

�0.50� TYP
POST-REFLOW MINIMUM LATCH HEIGHT ⌖ 0.30Ⓜ A B C AT TIP 15
D D
24 CKT HEADER ASSEMBLY SHOWN AS EXAMPLE

�0.40� TYP
B2 B1 HEADER TO PCB
E DETAIL A ⌖ 0.30Ⓜ A B C AT TIP 16
MOUNT
CENTER PLANE B1 B2 SCALE 30:1
C OF DATUM B Z C
A1 A2
1.35

0.84
CUTAWAY SHOWING UPPER
DATUM PADS
QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
9.60 DIMENSION UNITS SCALE

2019/09/26
2019/09/26
2019/09/11
SYMBOLS GENERAL
TOLERANCES
= 0 (UNLESS SPECIFIED) MM ONLY 5:1
B DRWN BY DATE B
= 0 ANGULAR TOL ± 1.0 °
2X 5.90 MIN
TMACHUGA 2011/11/23
= 0 4 PLACES ± MINI 50 DUAL ROW
B Z A4 5.55 ±0.10 14 ±
CHK'D BY DATE
SMT HEADER ASSEMBLY SALES DRAWING
*POST REFLOW 3 PLACES

-
A3 B3 B4 = 0
MINIMUM 2 PLACES ± 0.1
A

JDUNAJ
JDUNAJ
SRUSS
APPR BY DATE

624745
⌓ 0.1 TYP B3 MEASURED FROM DATUM PADS IN = 0 PRODUCT CUSTOMER DRAWING
B4 1 PLACE ± 0.2
(CONTACT SURFACES) LOWER LEFT AND RIGHT CORNERS SMARCEAU 2011/12/19 SERIES MATERIAL NUMBER CUSTOMER
TO DATUM TARGETS B3 AND B4. = 0 0 PLACES ±

DRWN:
EC NO:

CHK'D:
APPR:
DRAWING SIZE
SECTION Z-Z
A THIRD ANGLE PROJECTION A
34897 SEE CHART GENERAL MARKET
= 0 DRAFT WHERE APPLICABLE
MUST REMAIN
D DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER

REV
RELEASE STATUS RELEASE DATE
C = 0 W7 WITHIN DIMENSIONS
SD-34897-001 PSD 000 2 OF 5
FORMAT: master-tb-prod-D
REVISION: G
19
DATE: 2017/02/06 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

RECOMMENDED PCB LAYOUT:

L L

K K
0.66 ±0.06
0.66 ±0.06 12X 0.66 ±0.06
G
F ⌖ 0.08 F-G

CIRCUIT 10

CIRCUIT 11

CIRCUIT 12
CIRCUIT 7

CIRCUIT 4
CIRCUIT 1
CIRCUIT 5

CIRCUIT 2
CIRCUIT 6

CIRCUIT 8
CIRCUIT 9

CIRCUIT 3
HEADER OUTLINE - APPLIES SIMILARLY
BEFORE REFLOW SOLDERING �15� TO ALL CIRCUIT SIZES
7X �1� (DATUM PLANE -E-)
J TEMPERATURE EXPOSURE �7.5� J
(PCB)
12X �0.5� 4X �2�
12X �1.05�
�0.5� 2X �6.72�
13
17.4 ±0.2
(DATUM PLANE -E)
12X �2.75�

2X (6.85)
H
4X 2 H
2X �7.8�
7X 1
12.10 MAX 2X �8�

SOLDER NAIL COMMON CENTERPLANE FOR:

SOLDER NAIL * CENTERPLANE OF SOLDER
(CENTERPLANE OF NAILS (HEADER)
G * PCB SOLDER NAIL PADS COMMON CENTERPLANE FOR: G
SOLDER NAILS)
�2X 0.24� CONTACT SURFACES D * DATUM "F" (HEADER)
* PCB SOLDER NAIL PADS (28.52)
*REFER NOTE MENTIONED AT PCB SOLDER NAIL PADS
BOTTOM OF THIS SHEET
�22.62� F 2X �3.32�
�15�
�27.05�
�28.52�

F F
12 CKT SMT USCAR HEADER (BOTTOM VIEW) 12 CKT PCB LAYOUT
(OTHER CIRCUIT SIZES ARE SIMILAR)

E AFTER REFLOW SOLDERING E

TEMPERATURE EXPOSURE
(DATUM PLANE -E)

D D
+0.2
11.68
-0.5

C �2X 0.24� CONTACT SURFACES D

C

QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS SCALE

2019/09/26
2019/09/26
2019/09/11
SYMBOLS GENERAL
TOLERANCES
= 0 (UNLESS SPECIFIED) MM ONLY 5:1
B DRWN BY DATE B
NOTE: = 0 ANGULAR TOL ± 1.0 °
CONTACTS PER CKT: TMACHUGA 2011/11/23
= 0 4 PLACES ± MINI 50 DUAL ROW
12 CKT - 14 CONTACTS CHK'D BY DATE
SMT HEADER ASSEMBLY SALES DRAWING
3 PLACES ±

-
16 CKT - 18 CONTACTS = 0
20 CKT - 22 CONTACTS 2 PLACES ± 0.1

JDUNAJ
JDUNAJ
SRUSS
APPR BY DATE

624745
24 CKT - 26 CONTACTS = 0 PRODUCT CUSTOMER DRAWING
1 PLACE ± 0.2
SMARCEAU 2011/12/19 SERIES MATERIAL NUMBER CUSTOMER
= 0 0 PLACES ±

DRWN:
EC NO:

CHK'D:
APPR:
DRAWING SIZE THIRD ANGLE PROJECTION
A A
34897 SEE CHART GENERAL MARKET
= 0 DRAFT WHERE APPLICABLE
MUST REMAIN
D DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER

REV
RELEASE STATUS RELEASE DATE
C = 0 W7 WITHIN DIMENSIONS
SD-34897-001 PSD 000 3 OF 5
FORMAT: master-tb-prod-D
REVISION: G
19
DATE: 2017/02/06 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

L
16 CKT PCB LAYOUT RECOMMENDED PCB LAYOUT: L

16X 0.66 ±0.06 0.66 ±0.06

0.66 ±0.06
F ⌖ 0.08 F-G G

CIRCUIT 15
CIRCUIT 11
CIRCUIT 12

CIRCUIT 16
CIRCUIT 14
CIRCUIT 5
CIRCUIT 10

CIRCUIT 13
CIRCUIT 4

CIRCUIT 6
CIRCUIT 9
CIRCUIT 3
CIRCUIT 8
CIRCUIT 2
CIRCUIT 1
CIRCUIT 7
K K

(PCB)

2X �6.72�

16X �2.75�
J 2X �3.32� J
COMMON CENTERPLANE FOR:
* CENTERPLANE OF SOLDER 4X 2
NAILS (HEADER)
* PCB SOLDER NAIL PADS
2X �8�

11X 1

H H

PCB SOLDER NAIL PADS COMMON CENTERPLANE FOR:

* DATUM "F" (HEADER)
* PCB SOLDER NAIL PADS (32.52)
24 CKT PCB LAYOUT
�19�
20 CKT PCB LAYOUT
G �32.52� 0.66 ±0.06 G
0.66 ±0.06 24X 0.66 ±0.06
0.66 ±0.06 20X 0.66 ±0.06 0.66 ±0.06 ⌖ 0.08 F-G G
F
F ⌖ 0.08 F-G G

CIRCUIT 22
CIRCUIT 9
CIRCUIT 7
CIRCUIT 19
CIRCUIT 15

CIRCUIT 16

CIRCUIT 24
CIRCUIT 18

CIRCUIT 21
CIRCUIT 4

CIRCUIT 17

CIRCUIT 6
CIRCUIT 13

CIRCUIT 8
CIRCUIT 20
CIRCUIT 14

CIRCUIT 10
CIRCUIT 11

CIRCUIT 12

CIRCUIT 23
CIRCUIT 5
CIRCUIT 1

CIRCUIT 2

CIRCUIT 3
CIRCUIT 19

CIRCUIT 20
CIRCUIT 8
CIRCUIT 7
CIRCUIT 14
CIRCUIT 13

CIRCUIT 17

CIRCUIT 18
CIRCUIT 12

CIRCUIT 15

CIRCUIT 6
CIRCUIT 5
CIRCUIT 16
CIRCUIT 4
CIRCUIT 10

CIRCUIT 11
CIRCUIT 1
CIRCUIT 9
CIRCUIT 2

CIRCUIT 3

(PCB) (PCB)
F F
2X �6.72� 2X �6.72�

20X �2.75� 24X �2.75�

2X �3.32� 2X �3.32�

COMMON CENTERPLANE FOR:

4X 2 * CENTERPLANE OF SOLDER 4X 2
E E
NAILS (HEADER)
2X �8� * PCB SOLDER NAIL PADS 2X �8�
15X 1
COMMON CENTERPLANE FOR: 19X 1
* CENTERPLANE OF SOLDER
NAILS (HEADER)
* PCB SOLDER NAIL PADS
PCB SOLDER NAIL PADS
D COMMON CENTERPLANE FOR: COMMON CENTERPLANE FOR: D
PCB SOLDER NAIL PADS
* DATUM "F" (HEADER) * DATUM "F" (HEADER)
* PCB SOLDER NAIL PADS (36.52) * PCB SOLDER NAIL PADS (40.52)
�23� �27�

�36.52� �40.52�

C C

QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS SCALE

2019/09/26
2019/09/26
2019/09/11
SYMBOLS GENERAL
TOLERANCES
= 0 (UNLESS SPECIFIED) MM ONLY 5:1
B DRWN BY DATE B
= 0 ANGULAR TOL ± 1.0 °
TMACHUGA 2011/11/23
= 0 4 PLACES ± MINI 50 DUAL ROW
CHK'D BY DATE
SMT HEADER ASSEMBLY SALES DRAWING
3 PLACES ±

-
= 0
2 PLACES ± 0.1

JDUNAJ
JDUNAJ
SRUSS
APPR BY DATE

624745
= 0 PRODUCT CUSTOMER DRAWING
1 PLACE ± 0.2
SMARCEAU 2011/12/19 SERIES MATERIAL NUMBER CUSTOMER
= 0 0 PLACES ±

DRWN:
EC NO:

CHK'D:
APPR:
DRAWING SIZE THIRD ANGLE PROJECTION
A A
34897 SEE CHART GENERAL MARKET
= 0 DRAFT WHERE APPLICABLE
MUST REMAIN
D DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER

REV
RELEASE STATUS RELEASE DATE
C = 0 W7 WITHIN DIMENSIONS
SD-34897-001 PSD 000 4 OF 5
FORMAT: master-tb-prod-D
REVISION: G
19
DATE: 2017/02/06 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

L L
MINI50 SMT DUAL ROW HEADER ASSEMBLIES

GOLD:
K MATERIAL NUMBER MATING COMPONENT K

TUBE PACKAGING TAPE AND REEL PACKAGING CONFIGURATION CIRCUIT POL DEPOPULATED VOIDED CKTS COLOR BLADE PLATING
UN-BRIDGED BRIDGED
PK-31301-688 PK-31301-786
34897-5120 34897-6120 USCAR 12 A NO N/A BLACK GOLD 34824-0124 34824-1124
34897-5121 34897-6121 USCAR 12 B NO N/A GRAY GOLD 34824-0125 34824-1125
J 34897-5122 34897-6122 USCAR 12 C NO N/A DARK GRAY GOLD 34824-0126 34824-1126 J

34897-5160 34897-6160 USCAR 16 A NO N/A BLACK GOLD 34824-0164 34824-1164

34897-5161 34897-6161 USCAR 16 B NO N/A GRAY GOLD 34824-0165 34824-1165
34897-5162 34897-6162 USCAR 16 C NO N/A DARK GRAY GOLD 34824-0166 34824-1166
34897-5200 34897-6200 USCAR 20 A NO N/A BLACK GOLD 34824-0204 34824-1204
H 34897-5201 34897-6201 USCAR 20 B NO N/A GRAY GOLD 34824-0205 34824-1205 H

34897-5202 34897-6202 USCAR 20 C NO N/A DARK GRAY GOLD 34824-0206 34824-1206

34897-5240 34897-6240 USCAR 24 A NO N/A BLACK GOLD 34824-0244 34824-1244
34897-5241 34897-6241 USCAR 24 B NO N/A GRAY GOLD 34824-0245 34824-1245
34897-5242 34897-6242 USCAR 24 C NO N/A DARK GRAY GOLD 34824-0246 34824-1246
G G

TIN:
MATERIAL NUMBER MATING COMPONENT
TUBE PACKAGING TAPE AND REEL PACKAGING CONFIGURATION CIRCUIT POL COLOR BLADE PLATING
UN-BRIDGED BRIDGED
F PK-31301-688 PK-31301-786 F

34897-9120 34897-8120 USCAR 12 A BLACK TIN 34824-0124 34824-1124

34897-9121 34897-8121 USCAR 12 B GRAY TIN 34824-0125 34824-1125
34897-9122 34897-8122 USCAR 12 C DARK GRAY TIN 34824-0126 34824-1126
34897-9160 34897-8160 USCAR 16 A BLACK TIN 34824-0164 34824-1164
E 34897-9161 34897-8161 USCAR 16 B GRAY TIN 34824-0165 34824-1165 E

34897-9162 34897-8162 USCAR 16 C DARK GRAY TIN 34824-0166 34824-1166

34897-9200 34897-8200 USCAR 20 A BLACK TIN 34824-0204 34824-1204
34897-9201 34897-8201 USCAR 20 B GRAY TIN 34824-0205 34824-1205
34897-9202 34897-8202 USCAR 20 C DARK GRAY TIN 34824-0206 34824-1206
D 34897-9240 34897-8240 USCAR 24 A BLACK TIN 34824-0244 34824-1244 D

34897-9241 34897-8241 USCAR 24 B GRAY TIN 34824-0245 34824-1245

34897-9242 34897-8242 USCAR 24 C DARK GRAY TIN 34824-0246 34824-1246

C C

QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS SCALE

2019/09/26
2019/09/26
2019/09/11
SYMBOLS GENERAL
TOLERANCES
= 0 (UNLESS SPECIFIED) MM ONLY 1:1
B DRWN BY DATE B
= 0 ANGULAR TOL ± 1.0 °
TMACHUGA 2011/11/23
= 0 4 PLACES ± MINI 50 DUAL ROW
CHK'D BY DATE
SMT HEADER ASSEMBLY SALES DRAWING
3 PLACES ±

-
= 0
2 PLACES ± 0.1

JDUNAJ
JDUNAJ
SRUSS
APPR BY DATE

624745
= 0 PRODUCT CUSTOMER DRAWING
1 PLACE ± 0.2
SMARCEAU 2011/12/19 SERIES MATERIAL NUMBER CUSTOMER
= 0 0 PLACES ±

DRWN:
EC NO:

CHK'D:
APPR:
DRAWING SIZE THIRD ANGLE PROJECTION
A A
34897 SEE CHART GENERAL MARKET
= 0 DRAFT WHERE APPLICABLE
MUST REMAIN
D DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER

REV
RELEASE STATUS RELEASE DATE
C = 0 W7 WITHIN DIMENSIONS
SD-34897-001 PSD 000 5 OF 5
FORMAT: master-tb-prod-D
REVISION: G
19
DATE: 2017/02/06 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1