Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Item Information Page

Cisco Networking Academy content is copyrighted and the unauthorized posting, distribution or sharing of this
assessment content is prohibited.

Table of Contents
General Information
Feedback Section
Scoring

General Information
Assessment = RSE Practice Skills Assessment - PT
Form = English FormB RSE Practice Skills Assessment - PT
User ID =
Scored Date = Sat Aug 29 14:54:10 GMT+00:00 2015

The time shown is Greenwich Mean Time (GMT). Subtract or add the appropriate number of hours to adjust to your local time.
If you do not know the correct number of hours to adjust to GMT, visit http://www.timeanddate.com/worldclock/search.html.

Feedback
Based on your performance on this assessment, this table reports your preparedness for taking a hands-on skills exam
covering similar networking skills. The estimates are based on expert opinion of the knowledge and skills needed to
successfully perform these networking tasks on a repeatable basis.

Performance Components Proficiency Estimates

None Novice Partial Proficient
DHCP Configuration

NAT Configuration

ACL Configuration

Basic Router Interface Configuration

Router Interface Addressing

Basic Device Configuration

Summary and Default Route Configuration

Single-area OSPFv2 Activation

OSPF Customization

SVI Configuration

VLAN Configuration

Switch Port Configuration

Trunk Configuration

1 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Routing Between VLANs Configuration

You have successfully completed all of the DHCP configuration tasks.

You have correctly completed some of the NAT configuration tasks.
You have correctly completed none of the access control list configuration tasks.
You have completed all of the basic router interface configuration tasks.
You have correctly completed all of the interface addressing tasks.
You have correctly completed all of the basic device configuration tasks.
You have correctly completed many of the summary and default routing configuration tasks.
You have successfully completed many of the basic single-area OSPFv2 configuration tasks.
You have correctly completed most of the OSPF customization tasks.
You have successfully completed all of the SVI configuration tasks.
You have successfully completed all of the VLAN configuration tasks.
You have successfully completed all of the switch port configuration tasks.
You have successfully completed all of the trunk configuration tasks.
You have successfully completed all of the inter-VLAN routing configuration tasks.

See Terminology section for an explanation of terms.

Scoring
Total Points Possible = 100
Total Earned Points = 73

Performance Component: DHCP Configuration

Description:
Maximum Points = 10
Earned Points = 10

Work Product Feature Student Earned Max

Result Points Points
DHCP Configuration 10 10
Exclude DHCP Address Ranges 3 3
Network:[[R1Name]]:DHCP:Excluded Addresses:192.168.45.1 Correct
192.168.45.20
Network:[[R1Name]]:DHCP:Excluded Addresses:192.168.47.1 Correct
192.168.47.20
Configure DHCP POOL Addresses Pool: VLAN45 3 3
Network:[[R1Name]]:DHCP:Pools:VLAN45:DNS Server Correct
Network:[[R1Name]]:DHCP:Pools:VLAN45:Default Gateway Correct
Network:[[R1Name]]:DHCP:Pools:VLAN45:Start IP address Correct
Network:[[R1Name]]:DHCP:Pools:VLAN45:Subnet mask Correct
Configure DHCP POOL Addresses Pool: VLAN47 3 3
Network:[[R1Name]]:DHCP:Pools:VLAN47:DNS Server Correct
Network:[[R1Name]]:DHCP:Pools:VLAN47:Default Gateway Correct
Network:[[R1Name]]:DHCP:Pools:VLAN47:Start IP address Correct
Network:[[R1Name]]:DHCP:Pools:VLAN47:Subnet mask Correct
Set Clients to DHCP 1 1
Network:[[PC1Name]]:Ports:FastEthernet0:DHCP client enable Correct
Network:[[PC2Name]]:Ports:FastEthernet0:DHCP client enable Correct
Network:[[PC3Name]]:Ports:FastEthernet0:DHCP client enable Correct
Network:[[PC4Name]]:Ports:FastEthernet0:DHCP client enable Correct

Performance Component: NAT Configuration

Description:
Maximum Points = 9
Earned Points = 4

2 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Work Product Feature Student Earned Max

Result Points Points
NAT Configuration 4 9
Configure Static NAT 4 4
Network:[[R2Name]]:NAT:Inside Source Static:192.168.18.46 Correct
198.51.100.14
Network:[[R2Name]]:Ports:Serial0/1/0:NAT Correct
Network:[[R2Name]]:Ports:GigabitEthernet0/0:NAT Correct
Configure Dynamic NAT 0 5
Network:[[R2Name]]:NAT:Pools:INTERNET Incorrect
Network:[[R2Name]]:NAT:Inside Source List:1 Incorrect

Performance Component: ACL Configuration

Description:
Maximum Points = 13
Earned Points = 0

Work Product Feature Student Result Earned Points Max Points

ACL Configuration 0 13
Configure Named Standard ACL 0 2
Network:[[R2Name]]:ACL:MANAGE Incorrect
Configure Lines with Named Standard ACL 0 1
Network:[[R2Name]]:VTY Lines:0:Access Class In Incorrect
Configure NAT Standard ACL:R2 0 3
Network:[[R2Name]]:ACL:1 Incorrect
Configure Extended ACL 0 4
Network:[[R2Name]]:ACL:101 Incorrect
Configure Interface with Extended ACL 0 3
Network:[[R2Name]]:Ports:Serial0/1/0:Access-group In Incorrect

Performance Component: Basic Router Interface Configuration

Description:
Maximum Points = 7
Earned Points = 7

Work Product Feature Student Result Earned Points Max Points

Basic Router Interface Configuration 7 7
Configure Interface Settings: R1 S0/0/0 2 2
Network:[[R1Name]]:Ports:Serial0/0/0:Power Correct
Network:[[R1Name]]:Ports:Serial0/0/0:Clock Rate Correct
Network:[[R1Name]]:Ports:Serial0/0/0:Description Correct
Network:[[R1Name]]:Ports:Serial0/0/0:Bandwidth Info Correct
Configure Interface Settings: R2: S0/0/0 1 1
Network:[[R2Name]]:Ports:Serial0/0/0:Power Correct
Network:[[R2Name]]:Ports:Serial0/0/0:Bandwidth Info Correct
Configure Interface Settings: R2: S0/0/1 2 2
Network:[[R2Name]]:Ports:Serial0/0/1:Power Correct
Network:[[R2Name]]:Ports:Serial0/0/1:Clock Rate Correct
Network:[[R2Name]]:Ports:Serial0/0/1:Bandwidth Info Correct
Configure Interface Settings: R2: G0/0 1 1
Network:[[R2Name]]:Ports:GigabitEthernet0/0:Power Correct
Configure Interface Settings: R3: S0/0/1 1 1
Network:[[R3Name]]:Ports:Serial0/0/1:Power Correct
Network:[[R3Name]]:Ports:Serial0/0/1:Bandwidth Info Correct

3 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Performance Component: Router Interface Addressing

Description:
Maximum Points = 7
Earned Points = 7

Work Product Feature Student Result Earned Points Max Points

Router Interface Addressing 7 7
Configure Interface Addresses: R1 2 2
Network:[[R1Name]]:Ports:Serial0/0/0:IP Address Correct
Network:[[R1Name]]:Ports:Serial0/0/0:Subnet Mask Correct
Configure Interface Addresses: R2 3 3
Network:[[R2Name]]:Ports:Serial0/0/0:IP Address Correct
Network:[[R2Name]]:Ports:Serial0/0/0:Subnet Mask Correct
Network:[[R2Name]]:Ports:Serial0/0/1:IP Address Correct
Network:[[R2Name]]:Ports:Serial0/0/1:Subnet Mask Correct
Network:[[R2Name]]:Ports:GigabitEthernet0/0:IP Address Correct
Network:[[R2Name]]:Ports:GigabitEthernet0/0:Subnet Mask Correct
Configure Interface Addresses: R3 2 2
Network:[[R3Name]]:Ports:Serial0/0/1:IP Address Correct
Network:[[R3Name]]:Ports:Serial0/0/1:Subnet Mask Correct

Performance Component: Basic Device Configuration

Description:
Maximum Points = 4
Earned Points = 4

Work Product Feature Student Result Earned Points Max Points

Basic Device Configuration 4 4
Configure Global Device Settings: R1 2 2
Network:[[R1Name]]:DNS:IP Domain Lookup Correct
Network:[[R1Name]]:Host Name Correct
Network:[[R1Name]]:Enable Secret Correct
Network:[[R1Name]]:Service Password Encryption Correct
Network:[[R1Name]]:Banner motd Correct
Configure Configuration Lines: R1 2 2
Network:[[R1Name]]:Console Line:Login Correct
Network:[[R1Name]]:Console Line:Password Correct
Network:[[R1Name]]:Console Line:Logging Synch Correct
Network:[[R1Name]]:VTY Lines:0:Password Correct

Performance Component: Summary and Default Route Configuration

Description:
Maximum Points = 9
Earned Points = 6

Work Product Feature Student Earned Max

Result Points Points
Summary and Default Route Configuration 6 9
Configure Default Routes 3 3
Network:[[R1Name]]:Routes:Static RoutesV2:0.0.0.0-0-Serial0/0/0-0-1 Correct
Network:[[R2Name]]:Routes:Static RoutesV2:0.0.0.0-0-Serial0/1/0-0-1 Correct
Network:[[R3Name]]:Routes:Static RoutesV2:0.0.0.0-0-Serial0/0/1-0-1 Correct
Configure Summary Route to Branch Offices: R2 0 3

4 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Network:[[R2Name]]:Routes:Static RoutesV2:192.168.200.0-22- Incorrect

Serial0/0/1-0-1
Configure Summary Route to Branch Offices: R3 3 3
Network:[[R3Name]]:Routes:Static RoutesV2:192.168.200.0-22-Serial0/0 Correct
/0-0-1

Performance Component: Single-area OSPFv2 Activation

Description:
Maximum Points = 9
Earned Points = 5

Work Product Feature Student Result Earned Points Max Points

Single-area OSPFv2 Activation 5 9
Activate OSPF: R1 0 4
Network:[[R1Name]]:OSPF:10:Area:0:Area Status Correct
Network:[[R1Name]]:OSPF:10:Networks:192.168.10.104 0.0.0.3 0 Correct
Network:[[R1Name]]:OSPF:10:Networks:192.168.45.0 0.0.0.255 0 Correct
Network:[[R1Name]]:OSPF:10:Networks:192.168.47.0 0.0.0.255 0 Correct
Network:[[R1Name]]:OSPF:10:Networks:192.168.101.0 0.0.0.255 0 Incorrect
Activate OSPF: R2 3 3
Network:[[R2Name]]:OSPF:10:Area:0:Area Status Correct
Network:[[R2Name]]:OSPF:10:Networks:192.168.10.104 0.0.0.3 0 Correct
Network:[[R2Name]]:OSPF:10:Networks:192.168.10.112 0.0.0.3 0 Correct
Network:[[R2Name]]:OSPF:10:Networks:192.168.18.40 0.0.0.7 0 Correct
Activate OSPF: R3 2 2
Network:[[R3Name]]:OSPF:10:Area:0:Area Status Correct
Network:[[R3Name]]:OSPF:10:Networks:192.168.10.112 0.0.0.3 0 Correct

Performance Component: OSPF Customization

Description:
Maximum Points = 6
Earned Points = 4

Work Product Feature Student Earned Max

Result Points Points
OSPF Customization 4 6
Configure OSPF Router IDs 2 2
Network:[[R1Name]]:OSPF:10:Router ID Correct
Network:[[R2Name]]:OSPF:10:Router ID Correct
Network:[[R3Name]]:OSPF:10:Router ID Correct
Configure OSPF Passive Interfaces 0 2
Network:[[R1Name]]:OSPF:10:Passive Incorrect
Interface:GigabitEthernet0/0.45
Network:[[R1Name]]:OSPF:10:Passive Incorrect
Interface:GigabitEthernet0/0.47
Network:[[R1Name]]:OSPF:10:Passive Incorrect
Interface:GigabitEthernet0/0.101
Network:[[R2Name]]:OSPF:10:Passive Interface:GigabitEthernet0/0 Correct
Configure OSPF Costs 2 2
Network:[[R1Name]]:Ports:Serial0/0/0:OSPF Cost Correct
Network:[[R2Name]]:Ports:Serial0/0/0:OSPF Cost Correct

Performance Component: SVI Configuration

5 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Description:
Maximum Points = 6
Earned Points = 6

Work Product Feature Student Result Earned Points Max Points

SVI Configuration 6 6
Configure and Address SVI: S1 2 2
Network:[[S1Name]]:Ports:Vlan101:Power Correct
Network:[[S1Name]]:Ports:Vlan101:IP Address Correct
Network:[[S1Name]]:Ports:Vlan101:Subnet Mask Correct
Configure and Address SVI: S2 2 2
Network:[[S2Name]]:Ports:Vlan101:Power Correct
Network:[[S2Name]]:Ports:Vlan101:IP Address Correct
Network:[[S2Name]]:Ports:Vlan101:Subnet Mask Correct
Configure SVI Default Gateways 2 2
Network:[[S1Name]]:Default Gateway Correct
Network:[[S2Name]]:Default Gateway Correct

Performance Component: VLAN Configuration

Description:
Maximum Points = 6
Earned Points = 6

Work Product Feature Student Result Earned Points Max Points

VLAN Configuration 6 6
Name VLANs S1 1 1
Network:[[S1Name]]:VLANS:45:VLAN Name Correct
Network:[[S1Name]]:VLANS:47:VLAN Name Correct
Network:[[S1Name]]:VLANS:101:VLAN Name Correct
Name VLANs S2 1 1
Network:[[S2Name]]:VLANS:45:VLAN Name Correct
Network:[[S2Name]]:VLANS:47:VLAN Name Correct
Network:[[S2Name]]:VLANS:101:VLAN Name Correct
Assign Switch Ports to VLANs: S1 2 2
Network:[[S1Name]]:Ports:FastEthernet0/10:Access VLAN Correct
Network:[[S1Name]]:Ports:FastEthernet0/15:Access VLAN Correct
Assign Switch Ports to VLANs: S2 2 2
Network:[[S2Name]]:Ports:FastEthernet0/3:Access VLAN Correct
Network:[[S2Name]]:Ports:FastEthernet0/21:Access VLAN Correct

Performance Component: Switch Port Configuration

Description:
Maximum Points = 2
Earned Points = 2

Work Product Feature Student Result Earned Points Max Points

Switch Port Configuration 2 2
Configure unused ports as access ports 1 1
Network:[[S1Name]]:Ports:FastEthernet0/1:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/2:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/3:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/4:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/5:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/6:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/7:Dynamic Mode Correct

6 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Network:[[S1Name]]:Ports:FastEthernet0/8:Dynamic Mode Correct

Network:[[S1Name]]:Ports:FastEthernet0/9:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/10:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/11:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/12:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/13:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/14:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/15:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/16:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/17:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/18:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/19:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/20:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/21:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/22:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/23:Dynamic Mode Correct
Network:[[S1Name]]:Ports:FastEthernet0/24:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/1:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/2:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/3:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/4:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/5:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/6:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/7:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/8:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/9:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/10:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/11:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/12:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/13:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/14:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/15:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/16:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/17:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/18:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/19:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/20:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/21:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/22:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/23:Dynamic Mode Correct
Network:[[S2Name]]:Ports:FastEthernet0/24:Dynamic Mode Correct
Deactivate Unused Switch Ports 1 1
Network:[[S2Name]]:Ports:FastEthernet0/1:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/2:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/3:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/4:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/5:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/6:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/7:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/8:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/9:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/10:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/11:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/12:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/13:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/14:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/15:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/16:Power Correct

7 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Network:[[S2Name]]:Ports:FastEthernet0/17:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/18:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/19:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/20:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/21:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/22:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/23:Power Correct
Network:[[S2Name]]:Ports:FastEthernet0/24:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/1:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/2:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/3:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/4:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/5:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/6:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/7:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/8:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/9:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/10:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/11:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/12:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/13:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/14:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/15:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/16:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/17:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/18:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/19:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/20:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/21:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/22:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/23:Power Correct
Network:[[S1Name]]:Ports:FastEthernet0/24:Power Correct

Performance Component: Trunk Configuration

Description:
Maximum Points = 3
Earned Points = 3

Work Product Feature Student Result Earned Points Max Points

Trunk Configuration 3 3
Configure trunk ports: S1 2 2
Network:[[S1Name]]:Ports:GigabitEthernet0/1:Power Correct
Network:[[S1Name]]:Ports:GigabitEthernet0/1:Port Mode Correct
Network:[[S2Name]]:Ports:GigabitEthernet0/1:Power Correct
Network:[[S2Name]]:Ports:GigabitEthernet0/1:Port Mode Correct
Configure trunk port: S2 1 1
Network:[[S1Name]]:Ports:GigabitEthernet0/2:Power Correct
Network:[[S1Name]]:Ports:GigabitEthernet0/2:Port Mode Correct

Performance Component: Routing Between VLANs Configuration

Description:
Maximum Points = 9
Earned Points = 9

8 de 9 30/08/2015 21:46
Item Information Page https://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.serv...

Work Product Feature Student Result Earned Points Max Points

Routing Between VLANs Configuration 9 9
Configure Ethernet Subinterfaces 3 3
Network:[[R1Name]]:Ports:GigabitEthernet0/0:Power Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.45:Power Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.47:Power Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.101:Power Correct
Encapsulate Subinterfaces with VLAN designations 3 3
Network:[[R1Name]]:Ports:GigabitEthernet0/0.45:802.1Q:VLAN ID Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.47:802.1Q:VLAN ID Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.101:802.1Q:VLAN ID Correct
Address Subinterfaces 3 3
Network:[[R1Name]]:Ports:GigabitEthernet0/0.45:IP Address Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.45:Subnet Mask Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.47:IP Address Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.47:Subnet Mask Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.101:IP Address Correct
Network:[[R1Name]]:Ports:GigabitEthernet0/0.101:Subnet Mask Correct

Terminology
Performance Component - a description of what the student knows and can do about a coherent set of networking knowledge
and skills; the level at which the student's work product can be assigned a proficiency estimate.

Proficiency Estimate - a description of a student's level of mastery of the performance component. The proficiency estimate is
not meant to be a comprehensive statement of what the student knows and can do.

Work Product - student performance recorded during this assessment. For example, the submitted activity file, timing statistics,
and final running configurations.

Work Product Feature - An aspect of the student's work product. The feature can have a name and a value. For example,
Name = FastEthernet0/0:IP Address; Value = 192.168.1.1

Individual work product features are combined into performance components and scored based on the complexity of the
performance observed. Because the construction of performance components is based on the underlying work product features
as well as the unique design of each scenario, strict boundaries for determining a proficiency rating are not possible. In general:

None - 0% to 25% of possible points

Novice - 26% to 50% of possible points
Partial - 51% to 85% of possible points
Proficient - 86% to 100% of possible points

9 de 9 30/08/2015 21:46