[ 0.

000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.0.101-g09a21f8 (bensch@bensch-desktop) (gcc version
4.9.4 20160401 (optimized) (UBERTC-4.9.4) ) #1 SMP PREEMPT Wed Aug 3 14:02:09 CEST
2016
[ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Espresso board
[ 0.000000] android_display: setting default resolution 1280*800, bpp=4
[ 0.000000] android_display: tiler1d 32768000
[ 0.000000] android_display: setting fb0.vram to 4096000
[ 0.000000] android_display: setting vram to 4096000
[ 0.000000] android_display: ion carveouts: 88342528 tiler2d, 13107200 nonsecure
[ 0.000000] omap4_total_ram_size = 0x40000000
[ 0.000000] omap4_smc_size = 0x300000
[ 0.000000] omap4_ion_heap_secure_input_size = 0xe00000
[ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x0
[ 0.000000] omap4_ducati_heap_size = 0x4100000
[ 0.000000] omap4_ion_heap_tiler_mem_size = 0x0
[ 0.000000] omap4_ion_heap_nonsec_tiler_mem_size = 0x0
[ 0.000000] omap4_smc_addr = 0xbfd00000
[ 0.000000] omap4_ion_heap_secure_input_addr = 0xbef00000
[ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xbef00000
[ 0.000000] omap4_ducati_heap_addr = 0xbae00000
[ 0.000000] omap4_ion_heap_tiler_mem_addr = 0xbae00000
[ 0.000000] omap4_ion_heap_nonsec_tiler_mem_addr = 0xbae00000
[ 0.000000] omap_ion_init: secure_input id=2 [bef00000-bfd00000] size=e00000
[ 0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [bef00000-bef00000] size=0
[ 0.000000] omap_ion_init: tiler id=1 [bae00000-bae00000] size=0
[ 0.000000] omap_ion_init: nonsecure_tiler id=3 [bae00000-bae00000] size=0
[ 0.000000] omap_ion_init: system id=0 [0-0] size=0
[ 0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0
[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.3
[ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
[ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
[ 0.000000] On node 0 totalpages: 236544
[ 0.000000] free_area_init_node: node 0, pgdat c08b2740, node_mem_map c093c000
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 190496 pages, LIFO batch:31
[ 0.000000] HighMem zone: 544 pages used for memmap
[ 0.000000] HighMem zone: 44000 pages, LIFO batch:7
[ 0.000000] Warm Reset WA: succeeded to reconfigure the ABE DPLL
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1145000 s7456 r8192 d13024 u32768
[ 0.000000] pcpu-alloc: s7456 r8192 d13024 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages:
234496
[ 0.000000] Kernel command line: androidboot.hardware=espresso
root=/dev/mmcblk0p1 rw rootdelay=2 init=/init vram=15M omapfb.vram=0:8M
switch_sel=1 androidboot.emmc_checksum=3 sec_debug.enable=0 sec_debug.enable_user=0
androidboot.debug_level=0x4f4c mem=512M@0x80000000 mem=512M@0xa0000000 vmalloc=144m
console=sec_log_buf loglevel=0 androidboot.mode=reboot_normal bootmode=0
sec_log=2052K@0x9fdff000 sec_bootfb=8M@0xaf800000 lcd_panel_id=0
androidboot.serialno=c160759179affaf cordon=018a76b39eea9b0d2a89ce7cd9bb4433
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory
cgroups
[ 0.000000] Memory: 512MB 412MB = 924MB total
[ 0.000000] Memory: 922536k/922536k available, 126040k reserved, 178176K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xef800000 - 0xf8000000 ( 136 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef000000 ( 752 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0069000 ( 388 kB)
[ 0.000000] .text : 0xc0069000 - 0xc084d000 (8080 kB)
[ 0.000000] .data : 0xc084e000 - 0xc08b49c0 ( 411 kB)
[ 0.000000] .bss : 0xc08b4ab8 - 0xc093be98 ( 541 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:396
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every
131071999ms
[ 0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[ 0.070404] pid_max: default: 32768 minimum: 301
[ 0.070648] Security Framework initialized
[ 0.070678] SELinux: Initializing.
[ 0.070800] SELinux: Starting in permissive mode
[ 0.070922] Mount-cache hash table entries: 512
[ 0.072052] Initializing cgroup subsys debug
[ 0.072082] Initializing cgroup subsys cpuacct
[ 0.072143] Initializing cgroup subsys memory
[ 0.072204] Initializing cgroup subsys freezer
[ 0.072296] CPU: Testing write buffer coherency: ok
[ 0.072387] ftrace: allocating 22113 entries in 66 pages
[ 0.100860] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters
available
[ 0.100982] L310 cache controller enabled
[ 0.100982] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size:
1048576 B
[ 0.179534] CPU1: Booted secondary processor
[ 0.210266] Brought up 2 CPUs
[ 0.210266] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
[ 0.214508] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.214538] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[ 0.214569] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[ 0.214569] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[ 0.214599] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.214599] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.214630] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.214630] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.214660] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for
mpu_private
[ 0.214752] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[ 0.214843] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
[ 0.214874] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
[ 0.215118] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.234191] _omap4_module_wait_ready: Timeout waiting for module enable
(mcpdm_fck: clkctrl = 0x30002)
[ 0.237213] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.240051] print_constraints: dummy:
[ 0.240386] NET: Registered protocol family 16
[ 0.240570] GPMC revision 6.0
[ 0.241790] EMIF0 is enabled with IRQ142
[ 0.241882] EMIF1 is enabled with IRQ143
[ 0.241912] Last reset was warm software reset (PRM_RSTST=0x2)
[ 0.241912]
[ 0.242370] OMAP GPIO hardware version 0.1
[ 0.243835] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.245086] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.252471] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.252502] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 0.252532] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.257476] HSI: device registered as omap_hwmod: hsi
[ 0.257720] OMAP DMA hardware revision 0.0
[ 0.258392] omap_rproc_get_pool: dsp - no carveout memory is available at all
[ 0.258514] omap_rproc_get_pool: ipu - carveout memory is unavailable: 0x0, 0x0
[ 0.267333] bio: create slab <bio-0> at 0
[ 0.267944] print_constraints: VBATT: 1800 mV
[ 0.268188] print_constraints: vmmc: 2800 mV normal standby
[ 0.268402] print_constraints: eMMC_LDO: 1800 mV
[ 0.268768] print_constraints: vwl1271: 2000 mV
[ 0.269256] i2c-core: driver [twl] using legacy suspend method
[ 0.269256] i2c-core: driver [twl] using legacy resume method
[ 0.269653] SCSI subsystem initialized
[ 0.270812] usbcore: registered new interface driver usbfs
[ 0.270965] usbcore: registered new interface driver hub
[ 0.271118] usbcore: registered new device driver usb
[ 0.271911] i2c-gpio i2c-gpio.6: using pins 66 (SDA) and 65 (SCL)
[ 0.272155] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
[ 0.272399] i2c-gpio i2c-gpio.7: using pins 62 (SDA) and 61 (SCL)
[ 0.272644] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.273284] Skipping twl internal clock init and using bootloader value (unknown
osc rate)
[ 0.275817] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.277618] print_constraints: LDOUSB: 3300 mV normal standby
[ 0.278625] print_constraints: VANA: 2100 mV normal standby
[ 0.279327] print_constraints: CLK32KG:
[ 0.280029] print_constraints: CLK32KAUDIO:
[ 0.280761] print_constraints: LDO5: 1800 mV normal standby
[ 0.281555] print_constraints: LDO1: 2800 mV normal standby
[ 0.282104] print_constraints: LDO7: 1000 <--> 3300 mV at 900 mV normal standby
[ 0.282745] print_constraints: LDO6: 1800 mV normal standby
[ 0.283294] print_constraints: LDOLN: 1000 <--> 3300 mV at 1800 mV normal
standby
[ 0.283813] print_constraints: LDO2: 1000 <--> 3300 mV at 1800 mV normal standby
[ 0.284576] print_constraints: LDO4: 2800 mV normal standby
[ 0.285461] print_constraints: LDO3: 3300 mV normal standby
[ 0.285827] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.286193] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
[ 0.286529] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.287475] omap-rproc omap-rproc.0: dsp is available
[ 0.287567] omap-rproc omap-rproc.1: ipu is available
[ 0.287689] [SENSORS CORE] sensors_class_init
[ 0.287811] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.288574] Bluetooth: Core ver 2.16
[ 0.288665] NET: Registered protocol family 31
[ 0.288665] Bluetooth: HCI device and connection manager initialized
[ 0.288696] Bluetooth: HCI socket layer initialized
[ 0.288696] Bluetooth: L2CAP socket layer initialized
[ 0.288757] Bluetooth: SCO socket layer initialized
[ 0.289245] cfg80211: Calling CRDA to update world regulatory domain
[ 0.289855] Switching to clocksource 32k_counter
[ 0.296173] Switched to NOHz mode on CPU #0
[ 0.296203] Switched to NOHz mode on CPU #1
[ 0.313568] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
[ 0.314086] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk
split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.314117] musb-hdrc: MHDRC RTL version 2.0
[ 0.314117] musb-hdrc: setup fifo_mode 4
[ 0.314147] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.314392] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA,
IRQ 124
[ 0.314971] NET: Registered protocol family 2
[ 0.315307] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.316497] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.319000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.320556] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.320556] TCP reno registered
[ 0.320587] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.320648] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.321289] NET: Registered protocol family 1
[ 0.321624] Trying to unpack rootfs image as initramfs...
[ 0.408569] Freeing initrd memory: 1004K
[ 0.516998] omap_init_opp_table: no hwmod or odev for aess, [20] cannot add
OPPs.
[ 0.517028] omap_init_opp_table: no hwmod or odev for aess, [21] cannot add
OPPs.
[ 0.518798] ram_console: got buffer at a0000000, size 200000
[ 0.518981] ram_console: found existing buffer, size 40713, start 40713
[ 0.688873] console [ram-1] enabled
[ 0.689697] omap-iommu omap-iommu.0: ducati registered
[ 0.689880] omap-iommu omap-iommu.1: tesla registered
[ 0.690887] audit: initializing netlink socket (disabled)
[ 0.691070] type=2000 audit(0.664:1): initialized
[ 0.692657] highmem bounce pool size: 64 pages
[ 0.692932] ashmem: initialized
[ 0.711242] fuse init (API version 7.16)
[ 0.712554] SELinux: Registering netfilter hooks
[ 0.713287] Registering char device tf_driver (122:0)
[ 0.713531] SMCAG01.06p6.0 D
[ 0.716247] io scheduler noop registered
[ 0.716369] io scheduler deadline registered
[ 0.716644] io scheduler cfq registered (default)
[ 0.717773] OMAP DSS rev 4.0
[ 0.723114] dsscomp: initializing.
[ 0.723236] misc dsscomp: display0=ltn_panel
[ 0.723449] misc dsscomp: found 1 displays and 4 overlays, WB overlay 1
[ 0.724060] could not allocate slot
[ 0.724822] omap-rproc omap-rproc.1: powering up ipu
[ 0.725402] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
[ 0.726348] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
[ 0.727050] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0!
[ 0.727264] OMAPRPC: debug=0
[ 0.727844] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.728393] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.729217] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 0.729217] ------------[ cut here ]------------
[ 0.729644] WARNING: at
/home/bensch/bliss/kernel/samsung/espresso10/arch/arm/mach-omap2/omap_hwmod.c:1274
_enable+0x1bc/0x1dc()
[ 0.729644] omap_hwmod: uart3: enabled state can only be entered from
initialized, idle, or disabled state
[ 0.729644] Modules linked in:
[ 0.729644] Backtrace:
[ 0.729644] [<c0073ac0>] (dump_backtrace+0x0/0x114) from [<c0643484>]
(dump_stack+0x20/0x24)
[ 0.730743] r6:c00829f8 r5:00000009 r4:ee87dc08 r3:00000000
[ 0.730743] [<c0643464>] (dump_stack+0x0/0x24) from [<c00c43e0>]
(warn_slowpath_common+0x64/0x74)
[ 0.731536] [<c00c437c>] (warn_slowpath_common+0x0/0x74) from [<c00c4430>]
(warn_slowpath_fmt+0x40/0x48)
[ 0.731750] r8:c00e7a94 r7:c0867598 r6:a0000093 r5:c0876688 r4:c07a39f8
[ 0.731750] r3:00000009
[ 0.731750] [<c00c43f0>] (warn_slowpath_fmt+0x0/0x48) from [<c00829f8>]
(_enable+0x1bc/0x1dc)
[ 0.731750] r3:c07ad014 r2:c07a39f8
[ 0.732849] r4:c087663c
[ 0.733489] [<c008283c>] (_enable+0x0/0x1dc) from [<c00833c8>]
(omap_hwmod_enable+0x34/0x54)
[ 0.733489] r6:a0000093 r5:c0876688 r4:c087663c r3:ee8ddb60
[ 0.733703] [<c0083394>] (omap_hwmod_enable+0x0/0x54) from [<c007f9c0>]
(uart_enable_hwmod+0x20/0x28)
[ 0.733703] r6:00000001 r5:3b9aca00 r4:ee8eca00 r3:ee8ddb60
[ 0.734466] [<c007f9a0>] (uart_enable_hwmod+0x0/0x28) from [<c00a0624>]
(_omap_device_activate+0x7c/0x108)
[ 0.735229] [<c00a05a8>] (_omap_device_activate+0x0/0x108) from [<c00a0d14>]
(omap_device_enable+0x3c/0x98)
[ 0.735260] r7:c087f7b8 r6:00000004 r5:ee8eca08 r4:ee8eca00
[ 0.735260] [<c00a0cd8>] (omap_device_enable+0x0/0x98) from [<c00a0d90>]
(_od_runtime_resume+0x20/0x2c)
[ 0.735260] r4:ee8eca08
[ 0.735260] [<c00a0d70>] (_od_runtime_resume+0x0/0x2c) from [<c03561c8>]
(rpm_callback+0x60/0x70)
[ 0.736663] r4:c00a0d70 r3:0000000d
[ 0.736663] [<c0356168>] (rpm_callback+0x0/0x70) from [<c0356f7c>]
(rpm_resume+0x378/0x474)
[ 0.737213] r6:00000004 r5:00000001 r4:ee8eca08 r3:c087f920
[ 0.737213] [<c0356c04>] (rpm_resume+0x0/0x474) from [<c03570d0>]
(__pm_runtime_resume+0x58/0x70)
[ 0.737213] [<c0357078>] (__pm_runtime_resume+0x0/0x70) from [<c0340d04>]
(serial_omap_pm+0x30/0x250)
[ 0.737213] r7:ee97fdc8 r6:c0894560 r5:ee077600 r4:ee97fd78
[ 0.737213] [<c0340cd4>] (serial_omap_pm+0x0/0x250) from [<c033e130>]
(uart_add_one_port+0x2c0/0x3f8)
[ 0.738769] [<c033de70>] (uart_add_one_port+0x0/0x3f8) from [<c0342d5c>]
(serial_omap_probe+0x2d0/0x430)
[ 0.738769] [<c0342a8c>] (serial_omap_probe+0x0/0x430) from [<c0350588>]
(platform_drv_probe+0x28/0x2c)
[ 0.739227] [<c0350560>] (platform_drv_probe+0x0/0x2c) from [<c034ef50>]
(driver_probe_device+0xa0/0x1b0)
[ 0.739227] [<c034eeb0>] (driver_probe_device+0x0/0x1b0) from [<c034f150>]
(__driver_attach+0x9c/0xa0)
[ 0.739227] r8:00000000 r7:ee03d4e0 r6:ee8eca3c r5:c0894524 r4:ee8eca08
[ 0.740417] r3:00000000
[ 0.740417] [<c034f0b4>] (__driver_attach+0x0/0xa0) from [<c034d824>]
(bus_for_each_dev+0x7c/0xb0)
[ 0.740417] r6:c034f0b4 r5:c0894524 r4:00000000 r3:c034f0b4
[ 0.740417] [<c034d7a8>] (bus_for_each_dev+0x0/0xb0) from [<c034ebb8>]
(driver_attach+0x2c/0x30)
[ 0.741516] r6:c0895058 r5:c0894524 r4:00000000
[ 0.741729] [<c034eb8c>] (driver_attach+0x0/0x30) from [<c034e754>]
(bus_add_driver+0xd0/0x278)
[ 0.741729] [<c034e684>] (bus_add_driver+0x0/0x278) from [<c034f8d4>]
(driver_register+0x98/0x16c)
[ 0.741729] r8:00000000 r7:00000013 r6:c00c8728 r5:ee87c020 r4:c0894524
[ 0.743347] [<c034f83c>] (driver_register+0x0/0x16c) from [<c0350d44>]
(platform_driver_register+0x60/0x68)
[ 0.743347] r8:00000000 r7:00000013 r6:c00c8728 r5:ee87c020 r4:c08b4ac0
[ 0.743347] r3:00000000
[ 0.743347] [<c0350ce4>] (platform_driver_register+0x0/0x68) from [<c002b7a4>]
(serial_omap_init+0x28/0x4c)
[ 0.743347] [<c002b77c>] (serial_omap_init+0x0/0x4c) from [<c00697b8>]
(do_one_initcall+0x130/0x188)
[ 0.744781] r4:c08b4ac0 r3:c002b77c
[ 0.744781] [<c0069688>] (do_one_initcall+0x0/0x188) from [<c0008a7c>]
(kernel_init+0xc8/0x150)
[ 0.744781] [<c00089b4>] (kernel_init+0x0/0x150) from [<c00c8728>]
(do_exit+0x0/0x780)
[ 0.745483] ---[ end trace 861ec6d507ca0fc3 ]---
[ 0.745941] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 0.746551] omap_ion_probe: adding heap secure_input of type 2 with
bef00000@e00000
[ 0.747039] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with
bef00000@0
[ 0.747039] omap_ion_probe: adding heap tiler of type 4 with bae00000@0
[ 0.747406] omap_ion_probe: adding heap nonsecure_tiler of type 4 with
bae00000@0
[ 0.747406] omap_ion_probe: adding heap system of type 0 with 0@0
[ 0.747772] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0
[ 0.754943] brd: module loaded
[ 0.757171] loop: module loaded
[ 0.758728] zram: Created 1 device(s) ...
[ 0.759002] sec_jack_probe : Registering jack driver
[ 0.760192] print_constraints: WM1811 LDO1: at 3000 mV
[ 0.761474] print_constraints: WM1811 LDO2: at 1050 mV
[ 0.765319] wm8994 1-001a: Succeeded to read ID register
[ 0.768035] wm8994 1-001a: WM1811 revision D CUST_ID 00
[ 0.772888] wm8994 1-001a: No interrupt specified, no interrupts
[ 0.773559] i2c-core: driver [wm8994] using legacy suspend method
[ 0.773559] i2c-core: driver [wm8994] using legacy resume method
[ 0.775054] i2c i2c-6: sendbytes: NAK bailout.
[ 0.775054] stmpe811 6-0041: i2c_write failed, reg: 3, ret: -5
[ 0.813537] PPP generic driver version 2.4.2
[ 0.813537] PPP Deflate Compression module registered
[ 0.813537] PPP BSD Compression module registered
[ 0.827392] PPP MPPE Compression module registered
[ 0.827453] NET: Registered protocol family 24
[ 0.829010] tun: Universal TUN/TAP device driver, 1.6
[ 0.829010] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.830963] usbcore: registered new interface driver asix
[ 0.830963] usbcore: registered new interface driver cdc_ether
[ 0.831848] usbcore: registered new interface driver net1080
[ 0.831848] usbcore: registered new interface driver cdc_subset
[ 0.831848] usbcore: registered new interface driver zaurus
[ 0.832397] cdc_ncm: 04-Aug-2011
[ 0.832397] usbcore: registered new interface driver cdc_ncm
[ 0.832397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.833007] usbcore: registered new interface driver cdc_acm
[ 0.833587] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN
adapters
[ 0.833587] usbcore: registered new interface driver usblp
[ 0.833587] Initializing USB Mass Storage driver...
[ 0.833587] usbcore: registered new interface driver usb-storage
[ 0.833587] USB Mass Storage support registered.
[ 0.833587] usbcore: registered new interface driver usbserial
[ 0.833587] usbserial: USB Serial Driver core
[ 0.833587] USB Serial support registered for pl2303
[ 0.833587] usbcore: registered new interface driver pl2303
[ 0.835449] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 0.837463] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 0.837615] android_usb gadget: Number of LUNs=1
[ 0.837615] lun0: LUN: removable file: (no medium)
[ 0.838317] android_usb gadget: android_usb ready
[ 0.838317] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 0.838317] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[ 0.838317] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.838317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.838317] usb usb1: Product: MUSB HDRC host driver
[ 0.838317] usb usb1: Manufacturer: Linux 3.0.101-g09a21f8 musb-hcd
[ 0.839935] usb usb1: SerialNumber: musb-hdrc
[ 0.839935] hub 1-0:1.0: USB hub found
[ 0.840911] hub 1-0:1.0: 1 port detected
[ 0.840911] mousedev: PS/2 mouse device common for all mice
[ 0.840911] usbcore: registered new interface driver xpad
[ 0.842132] usbcore: registered new interface driver usb_acecad
[ 0.842132] acecad: v3.2:USB Acecad Flair tablet driver
[ 0.842132] usbcore: registered new interface driver aiptek
[ 0.842132] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux
2.6.x)
[ 0.842132] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[ 0.843109] usbcore: registered new interface driver gtco
[ 0.843109] GTCO usb driver version: 2.00.0006
[ 0.843109] usbcore: registered new interface driver hanwang
[ 0.843109] usbcore: registered new interface driver kbtab
[ 0.843109] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 0.843109] usbcore: registered new interface driver wacom
[ 0.844177] wacom: v1.52:USB Wacom tablet driver
[ 0.844635] tsp: ts_probe
[ 0.844635] input: sec_touchscreen as /devices/virtual/input/input0
[ 1.159088] tsp: binary fw. ver: 0xE168, IC fw. ver: 0xE178
[ 1.159088] tsp: fw_updater: No need FW update.
[ 1.159606] tsp: ts_probe: Start touchscreen. name: synaptics_ts, irq: 206
[ 1.160003] GPIO Input Driver: Start gpio inputs for espresso-gpio-keypad in
interrupt mode
[ 1.160522] GPIO Input Driver: Start gpio inputs for espresso-gpio-keypad in
interrupt mode
[ 1.160827] input: espresso-gpio-keypad as /devices/virtual/input/input1
[ 1.165557] using rtc device, twl_rtc, for alarms
[ 1.166259] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.167877] i2c /dev entries driver
[ 1.169189] dmm: probe base: fd300000, irq 145
[ 1.321380] max17042 7-0036: probed
[ 1.337921] smb347-charger 5-0006: probed
[ 1.339141] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 1.341522] device-mapper: uevent: version 1.0.3
[ 1.342254] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-
devel@redhat.com
[ 1.342254] Bluetooth: HCI UART driver ver 2.2
[ 1.342254] Bluetooth: HCI H4 protocol initialized
[ 1.343231] cpuidle: using governor ladder
[ 1.343353] cpuidle: using governor menu
[ 1.362792] usbcore: registered new interface driver usbhid
[ 1.362792] usbhid: USB HID core driver
[ 1.371429] OMAP HSI: HSI driver version 0.4.3
[ 1.371429] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
[ 1.371429] omap_hsi omap_hsi.0: HSI port 1 initialized
[ 1.371429] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
[ 1.372436] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
[ 1.372558] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000.
Will retry on next open
[ 1.382629] yas_acc_core_driver_init: set from board file.
[ 1.382843] yas_acc_core_driver_init: accelerometer position is 5
[ 1.383239] input: accelerometer as /devices/virtual/input/input2
[ 1.383636] yas_acc_probe -
[ 1.383941] i2c-core: driver [accelerometer] using legacy suspend method
[ 1.384155] i2c-core: driver [accelerometer] using legacy resume method
[ 1.384613] input: geomagnetic as /devices/platform/omap/omap_i2c.4/i2c-4/4-
002e/input/input3
[ 1.385253] input: geomagnetic_raw as /devices/platform/omap/omap_i2c.4/i2c-4/4-
002e/input/input4
[ 1.385620] geomagnetic_probe: set from board file.
[ 1.385742] geomagnetic_probe: yas magnetic position is 6
[ 1.386199] geomagnetic_probe: yamaha magnetic sensor id = 1
[ 1.386505] i2c-core: driver [geomagnetic] using legacy suspend method
[ 1.386718] i2c-core: driver [geomagnetic] using legacy resume method
[ 1.387451] input: orientation as /devices/virtual/input/input5
[ 1.602783] Lux : 53
[ 1.603240] input: light_sensor as /devices/virtual/input/input6
[ 1.603607] bh1721fvc_probe: success!
[ 1.604400] usbcore: registered new interface driver snd-usb-audio
[ 1.630859] mmc0: moviNAND VHX 4.41 DISCARD feature enabled
[ 1.641784] mmc0: new high speed DDR MMC card at address 0001
[ 1.642395] mmcblk0: mmc0:0001 MAG2GA 14.6 GiB
[ 1.642791] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 2.00 MiB
[ 1.643096] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 2.00 MiB
[ 1.647979] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
[ 1.651275] mmcblk0boot1: unknown partition table
[ 1.652648] mmcblk0boot0: unknown partition table
[ 1.675384] wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
[ 1.704406] asoc: wm8994-aif1 <-> omap-mcbsp-dai.2 mapping ok
[ 1.706329] asoc: wm8994-aif2 <-> CP mapping ok
[ 1.708221] asoc: wm8994-aif3 <-> BT mapping ok
[ 1.709381] ALSA device list:
[ 1.709503] #0: omap4_wm8994
[ 1.709899] GACT probability NOT on
[ 1.710021] Mirror/redirect action on
[ 1.710144] u32 classifier
[ 1.710266] Actions configured
[ 1.710479] Netfilter messages via NETLINK v0.30.
[ 1.710662] nf_conntrack version 0.5.0 (14430 buckets, 57720 max)
[ 1.712768] ctnetlink v0.93: registering with nfnetlink.
[ 1.712921] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.713134] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.713836] xt_time: kernel timezone is -0000
[ 1.716644] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.716979] arp_tables: (C) 2002 David S. Miller
[ 1.717285] TCP cubic registered
[ 1.717376] Initializing XFRM netlink socket
[ 1.718841] NET: Registered protocol family 10
[ 1.727508] Mobile IPv6
[ 1.727661] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.728149] IPv6 over IPv4 tunneling driver
[ 1.735870] NET: Registered protocol family 17
[ 1.736022] NET: Registered protocol family 15
[ 1.736511] Bridge firewalling registered
[ 1.736907] Bluetooth: RFCOMM TTY layer initialized
[ 1.737030] Bluetooth: RFCOMM socket layer initialized
[ 1.737243] Bluetooth: RFCOMM ver 1.11
[ 1.737365] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.737487] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.737915] NET: Registered protocol family 35
[ 1.738555] Registering the dns_resolver key type
[ 1.738861] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9
rev 4
[ 1.739105] ThumbEE CPU extension supported.
[ 1.739318] Registering SWP/SWPB emulation handler
[ 1.739440] Registering SDIV/UDIV emulation handler
[ 1.745971] Reprogramming LPDDR2 timings to 400000000 Hz
[ 1.746398] sr_init: No PMIC hook to init smartreflex
[ 1.746917] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver
initialized
[ 1.747253] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver
initialized
[ 1.747650] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver
initialized
[ 1.748229] SmartReflex class 1.5 driver: initialized (86400000ms)
[ 1.748657] cpufreq_interactive_input_connect: connect to sec_touchscreen
[ 1.749420] Power Management for TI OMAP4.
[ 1.749725] OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <->
L4_PER/CFG MPUSS <-> L3_MAIN_1.
[ 1.749938] OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and
DUCATI <-> L3.
[ 1.751892] modem_if: create_modemctl_device: xmm6262: create_modemctl_device
DONE
[ 1.752227] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:0 (mask:ff)
[ 1.752593] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:1 (mask:ff)
[ 1.752899] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:2 (mask:ff)
[ 1.753204] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:3 (mask:ff)
[ 1.753540] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:4 (mask:ff)
[ 1.753845] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:5 (mask:ff)
[ 1.754058] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:6 (mask:ff)
[ 1.754394] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff),
port:0, ch:7 (mask:ff)
[ 1.755065] modem_if: sipc4_init_io_device: umts_ipc0(0) : init_io_device() done
: 0
[ 1.755371] modem_if: sipc4_init_io_device: umts_rfs0(0) : init_io_device() done
: 0
[ 1.759735] modem_if: sipc4_init_io_device: rmnet0(1) : init_io_device() done :
0
[ 1.760070] modem_if: sipc4_init_io_device: umts_boot0(0) : init_io_device()
done : 0
[ 1.764648] modem_if: sipc4_init_io_device: rmnet1(1) : init_io_device() done :
0
[ 1.769500] modem_if: sipc4_init_io_device: rmnet2(1) : init_io_device() done :
0
[ 1.769866] modem_if: sipc4_init_io_device: multipdp(2) : init_io_device()
done : 0
[ 1.770202] modem_if: sipc4_init_io_device: umts_ramdump0(0) : init_io_device()
done : 0
[ 1.770446] modem_if: sipc4_init_io_device: umts_boot1(0) : init_io_device()
done : 0
[ 1.770751] modem_if: sipc4_init_io_device: umts_router(0) : init_io_device()
done : 0
[ 1.771057] modem_if: sipc4_init_io_device: umts_csd(0) : init_io_device()
done : 0
[ 1.771270] modem_if: sipc4_init_io_device: umts_loopback0(0) : init_io_device()
done : 0
[ 1.771484] modem_if: modem_probe: modem_probe Done
[ 1.771697] modem_if: init_modem: board init_modem done
[ 1.779022] clock: disabling unused clocks to save power
[ 1.821350] sr_class1p5_calib_work: iva: Calibration complete: Voltage
Nominal=950000Calib=835600 margin=0
[ 1.844757] sr_class1p5_calib_work: core: Calibration complete: Voltage
Nominal=962000Calib=886240 margin=0
[ 1.845214] sr_class1p5_calib_work: mpu: Calibration complete: Voltage
Nominal=1025000Calib=911560 margin=0
[ 1.930419] cannot apply mgr(lcd) on inactive device
[ 1.931091] omapfb omapfb: failed to apply dispc config
[ 1.931427] cannot apply mgr(tv) on inactive device
[ 1.931793] omapfb omapfb: failed to apply dispc config
[ 1.932312] cannot apply mgr(lcd2) on inactive device
[ 1.932678] omapfb omapfb: failed to apply dispc config
[ 2.267883] regulator_init_complete: LDO2: disabling
[ 2.269165] regulator_init_complete: LDOLN: disabling
[ 2.272979] twl_rtc twl_rtc: setting system clock to 2024-07-05 18:49:32 UTC
(1720205372)
[ 2.276458] batman_probe: Battery manager probe done
[ 2.278015] Warning: unable to open an initial console.
[ 2.278503] Freeing init memory: 388K
[ 2.285858] init: init started!
[ 2.301849] SELinux: 2048 avtab hash slots, 5344 rules.
[ 2.311218] SELinux: 2048 avtab hash slots, 5344 rules.
[ 2.311676] SELinux: 1 users, 2 roles, 581 types, 0 bools, 1 sens, 1024 cats
[ 2.312316] SELinux: 87 classes, 5344 rules
[ 2.317291] SELinux: Completing initialization.
[ 2.317535] SELinux: Setting up existing superblocks.
[ 2.317993] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 2.318298] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 2.318908] SELinux: initialized (dev bdev, type bdev), not configured for
labeling
[ 2.319366] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2.319641] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.320129] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
[ 2.371673] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 2.371978] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 2.372406] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not
configured for labeling
[ 2.372863] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 2.373168] SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
[ 2.373840] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 2.374298] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.374603] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 2.597503] type=1403 audit(1720205372.820:2): policy loaded auid=4294967295
ses=4294967295
[ 2.599456] type=1404 audit(1720205372.820:3): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
[ 2.790557] init: (Initializing SELinux enforcing took 0.50s.)
[ 2.818847] init: init second stage started!
[ 2.862792] adc_check_1 adc=4095
[ 2.873474] adc_check_1 adc=292
[ 2.884002] adc_check_1 adc=3718
[ 2.894470] adc_check_1 adc=545
[ 2.904968] adc_check_1 adc=3407
[ 2.905395] check_charger_type: Charger type is [AC], adc = 2556
[ 2.905639] charger_detect_work: cable flag : 1, cable_type : 2
[ 2.928710] smb347-charger 5-0006: charging current limit set to 1.8A
[ 2.928955] cable detect:TA attach, current device = 0x0100
[ 2.929382] espresso_con_ta_charger_attached, USB_EVENT_CHARGER
[ 2.940521] tsp: TA attached
[ 2.999237] init: waitpid failed: No child processes
[ 3.000152] init: (Loading properties from /default.prop took 0.00s.)
[ 3.011474] init: (Parsing /init.environ.rc took 0.00s.)
[ 3.012054] init: (Parsing /init.usb.rc took 0.00s.)
[ 3.013336] init: (Parsing init.omap4.rc took 0.00s.)
[ 3.013763] init: (Parsing init.espresso.usb.rc took 0.00s.)
[ 3.013946] init: (Parsing /init.espresso.rc took 0.00s.)
[ 3.014709] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[ 3.015014] init: (Parsing /init.zygote32.rc took 0.00s.)
[ 3.015289] init: (Parsing /init.trace.rc took 0.00s.)
[ 3.016204] init: (Parsing /init.superuser.rc took 0.00s.)
[ 3.016387] init: (Parsing /init.cm.rc took 0.00s.)
[ 3.024353] init: (Parsing /init.rc took 0.01s.)
[ 3.024780] init: SELinux: Could not get canonical path /adb_keys restorecon: No
such file or directory.
[ 3.025207] init: Starting service 'ueventd'...
[ 3.026000] init: Waiting for /dev/.coldboot_done...
[ 3.028778] ueventd: ueventd started!
[ 3.086975] sr_class1p5_calib_work: core: Calibration complete: Voltage
Nominal=1127000Calib=1038160 margin=0
[ 3.087127] sr_class1p5_calib_work: mpu: Calibration complete: Voltage
Nominal=1388000Calib=1215400 margin=0
[ 3.262939] ueventd: Coldboot took 0.22s.
[ 3.268280] init: Waiting for /dev/.coldboot_done took 0.24s.
[ 3.268432] init: /dev/hw_random not found
[ 3.298187] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 3.299774] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.337341] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 3.342681] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.356628] init: write_file: Unable to open
'/proc/sys/kernel/sched_compat_yield': No such file or directory
[ 3.359191] init: write_file: Unable to open
'/proc/sys/net/ipv4/fwmark_reflect': No such file or directory
[ 3.359893] init: write_file: Unable to open
'/proc/sys/net/ipv6/fwmark_reflect': No such file or directory
[ 3.360626] init: write_file: Unable to open
'/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory
[ 3.470062] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 3.470794] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares':
Invalid argument
[ 3.473785] type=1400 audit(1720205373.687:4): avc: denied { module_request }
for pid=1 comm="init" kmod="cpuset" scontext=u:r:init:s0 tcontext=u:r:kernel:s0
tclass=system permissive=0
[ 3.482360] init: write_file: Unable to open '/proc/sys/abi/swp': No such file
or directory
[ 3.488555] init: /dev/hw_random not found
[ 3.504699] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode.
Opts: barrier=1
[ 3.505187] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
[ 3.505859] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-
name/FACTORYFS,target=/system,type=ext4)=0
[ 3.872772] EXT4-fs (mmcblk0p1): recovery complete
[ 3.874237] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,errors=remount-ro
[ 3.874633] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
[ 3.875305] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-
name/EFS,/efs,ext4)=0: Success
[ 3.908233] fs_mgr: check_fs(): unmount(/efs) succeeded
[ 3.909881] fs_mgr: Running /system/bin/e2fsck on
/dev/block/platform/omap/omap_hsmmc.1/by-name/EFS
[ 3.989410] sr_class1p5_calib_work: mpu: Calibration complete: Voltage
Nominal=1200000Calib=1050820 margin=0
[ 4.058532] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size
5929456
[ 4.103759] omap-rproc omap-rproc.1: remote processor ipu is now up
[ 4.122009] omap_rpmsg_mbox_callback: received echo reply from ipu !
[ 4.122192] omap_rpmsg_mbox_callback: received echo reply from ipu !
[ 4.122283] omap_rpmsg_mbox_callback: received echo reply from ipu !
[ 4.122467] omap_rpmsg_mbox_callback: received echo reply from ipu !
[ 4.123657] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
[ 4.125946] sr_class1p5_calib_work: mpu: Calibration complete: Voltage
Nominal=1325000Calib=1114120 margin=0
[ 4.155487] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 4.155487]
[ 4.155731] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/EFS: clean,
38/1280 files, 2167/5120 blocks
[ 4.155761]
[ 4.161315] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode.
Opts: barrier=1
[ 4.161437] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
[ 4.161651] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-
name/EFS,target=/efs,type=ext4)=0
[ 4.274047] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60!
[ 15.991851] EXT4-fs (mmcblk0p10): ext4_orphan_cleanup: deleting unreferenced
inode 58548
[ 15.992523] EXT4-fs (mmcblk0p10): 1 orphan inode deleted
[ 15.992950] EXT4-fs (mmcblk0p10): recovery complete
[ 16.315948] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,errors=remount-ro
[ 16.316436] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
[ 16.317138] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-
name/DATAFS,/data,ext4)=0: Success
[ 16.516937] fs_mgr: check_fs(): unmount(/data) succeeded
[ 16.517242] fs_mgr: Running /system/bin/e2fsck on
/dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS
[ 16.637420] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 16.637451]
[ 16.637969] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS: clean,
21114/791520 files, 1922207/3160055 blocks
[ 16.638000]
[ 16.645233] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode.
Opts: barrier=1,noauto_da_alloc,journal_async_commit
[ 16.645721] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
[ 16.646331] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-
name/DATAFS,target=/data,type=ext4)=0
[ 16.646820] fs_mgr: mount_with_alternatives(): skipping fstab dup
mountpoint=/data rec[3].fs_type=f2fs already mounted as ext4.
[ 16.679626] EXT4-fs (mmcblk0p7): recovery complete
[ 16.682189] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode.
Opts: nomblk_io_submit,errors=remount-ro
[ 16.682678] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
[ 16.683319] fs_mgr: check_fs(): mount(/dev/block/platform/omap/omap_hsmmc.1/by-
name/CACHE,/cache,ext4)=0: Success
[ 16.705108] fs_mgr: check_fs(): unmount(/cache) succeeded
[ 16.705444] fs_mgr: Running /system/bin/e2fsck on
/dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE
[ 16.797698] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 16.797729]
[ 16.798614] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE: clean,
18/44832 files, 5825/179200 blocks
[ 16.798645]
[ 16.808837] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode.
Opts: barrier=1,noauto_da_alloc,journal_async_commit
[ 16.809082] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
[ 16.809295] fs_mgr: __mount(source=/dev/block/platform/omap/omap_hsmmc.1/by-
name/CACHE,target=/cache,type=ext4)=0
[ 16.809539] fs_mgr: mount_with_alternatives(): skipping fstab dup
mountpoint=/cache rec[5].fs_type=f2fs already mounted as ext4.
[ 16.812561] zram0: detected capacity change from 0 to 268435456
[ 16.901733] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1
across:262140k SS
[ 16.965270] PVR: PVRCore_Init
[ 16.965850] PVR: LinuxMMInit: Maximum page pool size: 10800
[ 16.966278] PVR: PVRSRVDriverProbe(pDevice=ee91c800)
[ 16.966583] PVR: SGX register base: 0x56000000
[ 16.966705] PVR: SGX register size: 65535
[ 16.966796] PVR: SGX IRQ: 53
[ 16.967163] PVR: EnableSystemClocks: Enabling System Clocks
[ 16.968200] PVR: PVRCore_Init: major device 245
[ 16.972503] init: Starting service 'logd'...
[ 17.010742] init: (Loading properties from /system/build.prop took 0.02s.)
[ 17.011169] init: (Loading properties from /vendor/build.prop took 0.00s.)
[ 17.011322] init: (Loading properties from /factory/factory.prop took 0.00s.)
[ 17.020111] init: Starting service 'vold'...
[ 17.022613] init: Not bootcharting.
[ 17.043151] logd.auditd: start
[ 17.043273] logd.klogd: 17018951438
[ 18.476318] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
[ 18.497009] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 118) exited
with status 0
[ 18.500366] init: write_file: Unable to open
'/sys/class/input/input3/distortion': No such file or directory
[ 18.501922] init: write_file: Unable to open
'/sys/class/input/input5/distortion': No such file or directory
[ 18.502563] init: write_file: Unable to open
'/sys/class/input/input6/distortion': No such file or directory
[ 18.506011] init: Starting service 'sysinit'...
[ 18.507049] init: (Loading properties from /data/local.prop took 0.00s.)
[ 18.934936] init: Starting service 'logd-reinit'...
[ 18.940307] init: Starting service 'healthd'...
[ 18.941650] init: Starting service 'lmkd'...
[ 18.942810] init: Starting service 'servicemanager'...
[ 18.944213] init: Starting service 'surfaceflinger'...
[ 18.945587] init: Starting service 'smc_pa'...
[ 18.951965] binder: 126:126 transaction failed 29189, size 0-0
[ 18.954925] init: Starting service 'pvrsrvinit'...
[ 18.981170] init: SELinux: Could not get canonical path
/sys/block/sda/queue/scheduler restorecon: No such file or directory.
[ 18.981475] init: SELinux: Could not get canonical path
/sys/block/sde/queue/scheduler restorecon: No such file or directory.
[ 18.982269] init: SELinux: Could not get canonical path
/sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
[ 18.984710] init: service 'console' requires console
[ 18.985595] init: Starting service 'netd'...
[ 18.998840] init: Starting service 'debuggerd'...
[ 18.999725] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 19.000274] init: Starting service 'ril-daemon'...
[ 19.001708] init: Starting service 'drm'...
[ 19.002868] init: Starting service 'media'...
[ 19.003967] init: Starting service 'installd'...
[ 19.005065] init: Starting service 'keystore'...
[ 19.006256] init: Starting service 'orientationd'...
[ 19.007568] init: Starting service 'geomagneticd'...
[ 19.008453] init: Starting service 'cpboot-daemon'...
[ 19.034515] init: Starting service 'gpsd'...
[ 19.050262] init: Starting service 'dock_kbd_attach'...
[ 19.051666] init: Starting service 'variant_setup'...
[ 19.075561] warning: `cbd' uses 32-bit capabilities (legacy support in use)
[ 19.075988] logd.daemon: reinit
[ 19.085662] type=1400 audit(1720205389.289:5): avc: denied { mknod } for pid=142
comm="cbd" capability=27 scontext=u:r:cpboot-daemon:s0 tcontext=u:r:cpboot-
daemon:s0 tclass=capability permissive=0
[ 19.171997] SMC: SecureCRC=0xCFDC2A68
[ 19.173767] Disabling non-boot CPUs ...
[ 19.193817] PVR: Installing MISR with cookie bf04820c
[ 19.198699] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 19.198852] PVR: SysFinalise: Version string: SGX revision = 1.2.0
[ 19.199035] omaplfbOMAPLFBInit: Blitsville gc2d not present, blits disabled
[ 19.199218] omaplfb: OMAPLFBInitIonOmap: Device 0: Requesting 2 TILER 2D
framebuffers
[ 19.199829] modem_if: misc_open: iod = umts_boot0
[ 19.199859] modem_if: xmm6262_reset:
[ 19.219848] CPU1: shutdown
[ 19.261840] init: Warning! Service zygote needs a SELinux domain defined;
please fix!
[ 19.261871] init: Starting service 'zygote'...
[ 19.262786] init: Service 'logd-reinit' (pid 125) exited with status 0
[ 19.264099] init: Starting service 'gatekeeperd'...
[ 19.265136] init: Starting service 'perfprofd'...
[ 19.265899] init: Starting service 'su_daemon'...
[ 19.266448] init: Service 'su_daemon' is being killed...
[ 19.277801] android_usb: already disabled
[ 19.349670] init: Service 'variant_setup' (pid 145) exited with status 0
[ 19.399566] omap_hsi omap_hsi.0: HSI clock is now 96000000
[ 19.399963] omap_hsi omap_hsi.0: Entering RX wakeup in 3 wires mode (no CAWAKE)
[ 19.491149] serio: Serial port ttyO3
[ 19.500396] omap_hsi omap_hsi.0: CAWAKE edge in RX 3 wires, exiting
[ 19.541198] init: Service 'pvrsrvinit' (pid 131) exited with status 0
[ 19.566284] modem_if: misc_release: iod = umts_boot0
[ 19.566436] modem_if: misc_open: iod = umts_boot1
[ 19.566589] omap_hsi omap_hsi.0: CAWAKE edge in RX 3 wires, exiting
[ 19.566711] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode
[ 19.585174] modem_if: misc_write: WARNNING: wrong tx size: umts_boot1, format=5
count=2161, tx_size=2161, return_size=2164
[ 19.660003] init: Service 'su_daemon' (pid 154) exited with status 0
[ 19.660186] init: Service 'su_daemon' (pid 154) killing any children in process
group
[ 19.682464] init: Untracked pid 159 exited with status 1
[ 19.953186] healthd: wakealarm_init: timerfd_create failed
[ 20.379669] init: Service 'sysinit' (pid 119) exited with status 0
[ 20.629150] init: Untracked pid 168 exited with status 0
[ 20.650482] init: Starting service 'bootanim'...
[ 20.654571] init: Untracked pid 175 exited with status 1
[ 20.657501] SMC PA: INFO 00000001 00:00:00.000 ------ ------ ---------------
Booting... (t=18:49:50.880) SMCXG01.06.33969 /CSDv1.1/WVDRMv2.x/HDCP
[ 20.673217] SMC PA: INFO 00000002 00:00:00.016 ------ ------ ---------------
Booted
[ 20.673400] Enabling non-boot CPUs ...
[ 20.711700] misc dsscomp: [ee147800] ignoring set failure -22
[ 20.735992] CPU1: Booted secondary processor
[ 20.736816] CPU1 is up
[ 20.738006] init: Service 'smc_pa' (pid 130) exited with status 0
[ 20.743072] Switched to NOHz mode on CPU #1
[ 20.942871] init: avc: granted { set } for property=net.rmnet0.dns1
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.943420] init: avc: granted { set } for property=net.rmnet0.dns2
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.943969] init: avc: granted { set } for property=net.rmnet0.gw
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.945068] init: avc: granted { set } for property=net.rmnet1.dns1
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.945678] init: avc: granted { set } for property=net.rmnet1.dns2
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.946166] init: avc: granted { set } for property=net.rmnet1.gw
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.947418] init: avc: granted { set } for property=net.rmnet2.dns1
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.948303] init: avc: granted { set } for property=net.rmnet2.dns2
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 20.948944] init: avc: granted { set } for property=net.rmnet2.gw
scontext=u:r:rild:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[ 21.320159] modem_if: misc_open: iod = umts_boot0
[ 22.240753] SELinux: 2048 avtab hash slots, 8530 rules.
[ 22.247283] SELinux: 2048 avtab hash slots, 8530 rules.
[ 22.247406] SELinux: 1 users, 2 roles, 581 types, 0 bools, 1 sens, 1024 cats
[ 22.247680] SELinux: 87 classes, 8530 rules
[ 22.379455] type=1403 audit(1720205392.593:6): policy loaded auid=4294967295
ses=4294967295
[ 23.299804] type=1400 audit(1720205393.515:7): avc: denied { read } for pid=137
comm="mediaserver" name="/" dev=tmpfs ino=2065 scontext=u:r:mediaserver:s0
tcontext=u:object_r:device:s0 tclass=dir permissive=0
[ 23.533874] SELinux: 2048 avtab hash slots, 8530 rules.
[ 23.539855] SELinux: 2048 avtab hash slots, 8530 rules.
[ 23.540130] SELinux: 1 users, 2 roles, 581 types, 0 bools, 1 sens, 1024 cats
[ 23.540344] SELinux: 87 classes, 8530 rules
[ 23.767913] type=1403 audit(1720205393.984:8): policy loaded auid=4294967295
ses=4294967295
[ 24.124237] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 25.591094] modem_if: misc_release: iod = umts_boot1
[ 25.613433] modem_if: misc_open: iod = umts_boot0
[ 25.790374] modem_if: phone_active_irq_handler: PA EVENT : reset =1, pa=1,
cp_dump=0
[ 25.790557] modem_if: io_dev_modem_state_changed: modem state changed. (iod:
umts_ipc0, state: 4)
[ 25.790649] modem_if: io_dev_modem_state_changed: modem state changed. (iod:
umts_boot0, state: 4)
[ 25.856231] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
[ 26.321411] modem_if: misc_release: iod = umts_boot0
[ 26.327056] modem_if: misc_open: iod = umts_ipc0
[ 26.327239] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode
[ 26.327453] modem_if: misc_open: iod = umts_rfs0
[ 26.545074] init: Untracked pid 369 exited with status 0
[ 29.329650] mipi_link: mipi_hsi_start_work: First write Done : 4
[ 35.311889] request_suspend_state: wakeup (3->0) at 35287597678 (2024-07-05
18:50:05.535339377 UTC)
[ 38.813446] dummy0: no IPv6 routers present
[ 125.175567] accel_open_calibration: Can't open calibration file
[ 125.175994] accel_open_calibration: Can't open calibration file
[ 125.405975] accel_open_calibration: Can't open calibration file
[ 125.563903] accel_open_calibration: Can't open calibration file
[ 125.636901] accel_open_calibration: Can't open calibration file
[ 125.663635] accel_open_calibration: Can't open calibration file
[ 125.822143] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[ 125.822235] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 125.822418] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[ 125.822509] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 125.822692] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[ 125.822784] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 125.822937] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 125.905242] set aif2 mode : Master
[ 132.004302] android_usb: already disabled
[ 132.004852] android_usb: already disabled
[ 132.005187] mtp_bind_config
[ 132.056243] acc_open
[ 132.056365] acc_release
[ 134.356048] wifi_set_power = 1
[ 134.664978] wifi_set_carddetect = 1
[ 134.813995] mmc2: new high speed SDIO card at address 0001
[ 134.818786]
[ 134.818786] Dongle Host Driver, version 1.88.45 (r)
[ 134.818786] Compiled in drivers/net/wireless/bcmdhd on Aug 3 2016 at 14:02:15
[ 134.834106] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
[ 134.835174] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
[ 134.849822] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 134.852722] wl_create_event_handler(): thread:wl_event_handler:265 started
[ 134.853118] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xd70213b8
[ 134.866180] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 134.871368] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 134.874786] p2p0: P2P Interface Registered
[ 134.875427] dhd_attach(): thread:dhd_watchdog_thread:26a started
[ 134.876007] dhd_attach(): thread:dhd_dpc:26b started
[ 134.876678] dhd_attach(): thread:dhd_rxf:26c started
[ 134.876983] dhd_attach(): thread:dhd_sysioc:26d started
[ 134.877441] wifi_get_mac_addr
[ 134.893005] Broadcom Dongle Host Driver: register interface [wlan0] MAC:
00:90:4c:6b:a9:12
[ 134.893585] wifi_set_power = 0
[ 135.204101] =========== WLAN placed in RESET ========
[ 135.238586]
[ 135.238616] Dongle Host Driver, version 1.88.45 (r)
[ 135.238616] Compiled in drivers/net/wireless/bcmdhd on Aug 3 2016 at 14:02:15
[ 135.238983] wl_android_wifi_on in
[ 135.239074] wifi_set_power = 1
[ 135.547851] =========== WLAN going back to live ========
[ 135.548004] sdio_reset_comm():
[ 136.224273] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 136.349578] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 136.374877] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0:
p2p_dev_addr=02:90:4c:6b:a9:12
[ 138.758605] init: Starting service 'p2p_supplicant'...
[ 142.021972] binder: 493:501 refcount change on invalid ref 54
[ 142.625762] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for
AO as XY rev 4
[ 142.633544] net_ratelimit: 5 callbacks suppressed
[ 142.636474] dhd_set_suspend: Remove extra suspend setting
[ 150.508697] p2p0: no IPv6 routers present
[ 151.297149] accel_open_calibration: Can't open calibration file
[ 157.632537] binder: 493:501 refcount change on invalid ref 136
[ 167.515991] init: Service 'bootanim' (pid 177) exited with status 0
[ 229.044616] binder: 1601:1609 refcount change on invalid ref 57
[ 229.571624] binder: 1601:1833 refcount change on invalid ref 57
[ 229.571716] binder: 1601:1833 refcount change on invalid ref 57
[ 229.571868] binder: transaction release 43749 bad handle 57
[ 236.310455] accel_open_calibration: Can't open calibration file
[ 236.366607] request_suspend_state: sleep (0->3) at 236342315696 (2024-07-05
18:53:26.590087913 UTC)
[ 236.367034] DSSCOMP: dsscomp_early_suspend
[ 236.397216] DSSCOMP: blanked screen
[ 243.706298] dhd_set_suspend: Remove extra suspend setting
[ 246.804931] dhd_set_suspend: force extra Suspend setting
[ 407.771911] binder: 493:571 transaction failed 29189, size 320-0
[ 410.117401] type=1400 audit(1720205780.328:9): avc: denied { write } for
pid=2669 comm="app_process32_o" name="system@framework@boot.art" dev=mmcblk0p10
ino=522244 scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0
tclass=file permissive=0
[ 410.346527] type=1400 audit(1720205780.562:10): avc: denied { write } for
pid=2669 comm="main" name="arm" dev=mmcblk0p10 ino=522243 scontext=u:r:shell:s0
tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=0
[ 416.147735] init: Untracked pid 2654 exited with status 39
[ 543.348022] binder: 1601: binder_alloc_buf size 1056768 failed, no address space
[ 543.348236] binder: 1470:2962 transaction failed 29201, size 1056768-0
[ 612.367431] type=1400 audit(1720205982.578:11): avc: denied { search } for
pid=3253 comm="Binder_1" name="com.android.settings" dev=mmcblk0p10 ino=40856
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:system_app_data_file:s0
tclass=dir permissive=0
[ 612.740936] type=1400 audit(1720205982.953:12): avc: denied { read } for
pid=3253 comm="Binder_1" name="/" dev=tmpfs ino=2065
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir
permissive=0
[ 620.792968] type=1400 audit(1720205991.007:13): avc: denied { read } for
pid=3253 comm="Binder_1" name="/" dev=tmpfs ino=2065
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir
permissive=0
[ 621.125061] type=1400 audit(1720205991.335:14): avc: denied { search } for
pid=3253 comm="Binder_1" name="151" dev=proc ino=50770
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=dir
permissive=0
[ 642.617248] binder: 3423:3431 refcount change on invalid ref 9
[ 661.352630] init: Untracked pid 2669 exited with status 0
[ 681.429962] type=1400 audit(1720206051.640:15): avc: denied { search } for
pid=3385 comm="Binder_4" name="com.android.settings" dev=mmcblk0p10 ino=40856
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:system_app_data_file:s0
tclass=dir permissive=0
[ 681.430938] type=1400 audit(1720206051.640:16): avc: denied { read } for
pid=3385 comm="Binder_4" name="/" dev=tmpfs ino=2065
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir
permissive=0
[ 684.914428] type=1400 audit(1720206055.125:17): avc: denied { read } for
pid=3385 comm="Binder_4" name="/" dev=tmpfs ino=2065
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:device:s0 tclass=dir
permissive=0
[ 685.186157] type=1400 audit(1720206055.398:18): avc: denied { search } for
pid=3385 comm="Binder_4" name="151" dev=proc ino=50770
scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=dir
permissive=0
[ 712.609863] PM: Syncing filesystems ... done.
[ 717.819610] PM: Preparing system for mem sleep
[ 717.820373] Freezing user space processes ... (elapsed 0.35 seconds) done.
[ 718.175018] Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
[ 718.214355] PM: Entering mem sleep
[ 718.214599] suspend_set_state: LDO3: No configuration
[ 718.214996] suspend_set_state: LDO4: No configuration
[ 718.216766] suspend_set_state: LDO1: No configuration
[ 718.217193] suspend_set_state: LDO5: No configuration
[ 718.217437] suspend_set_state: VANA: No configuration
[ 718.217987] Suspending console(s) (use no_console_suspend to debug)
[ 718.264984] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 718.265045] PVR: SysSystemPrePowerState: Entering state D3
[ 718.265075] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 718.265136] PVR: DisableSystemClocks: Disabling System Clocks
[ 718.268249] PM: suspend of devices complete after 47.058 msecs
[ 718.270172] PM: late suspend of devices complete after 1.922 msecs
[ 718.270202] Disabling non-boot CPUs ...
[ 718.280029] CPU1: shutdown
[ 718.281768] Resume caused by IRQ 39, TWL6030-PIH
[ 718.281768] Successfully put all powerdomains to target state
[ 718.281921] Suspended for 17.737 seconds
[ 718.282440] Enabling non-boot CPUs ...
[ 718.299285] CPU1: Booted secondary processor
[ 718.302520] CPU1 is up
[ 718.304626] PM: early resume of devices complete after 2.075 msecs
[ 718.305725] Switched to NOHz mode on CPU #1
[ 718.923248] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 718.923309] PVR: SysSystemPostPowerState: Entering state D0
[ 718.923339] PVR: EnableSystemClocks: Enabling System Clocks
[ 718.923400] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 718.923645] wakeup wake lock: musb_autosuspend_wake_lock
[ 718.955139] PM: resume of devices complete after 649.932 msecs
[ 718.975585] PM: Finishing wakeup.
[ 718.975830] Restarting tasks ...
[ 718.978057] hub 1-0:1.0: activate --> -22
[ 719.034545] done.
[ 719.035491] suspend: exit suspend, ret = 0 (2024-07-05 19:01:46.996765153 UTC)
[ 719.035980] active wake lock mmc1_detect
[ 719.036224] active wake lock wakelock-charger
[ 719.036437] active wake lock musb_autosuspend_wake_lock
[ 719.072875] serio: Serial port ttyO3
[ 722.937805] PM: Syncing filesystems ... done.
[ 723.880767] PM: Preparing system for mem sleep
[ 723.881500] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 723.925201] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 723.948669] PM: Entering mem sleep
[ 723.948913] suspend_set_state: LDO3: No configuration
[ 723.949340] suspend_set_state: LDO4: No configuration
[ 723.951019] suspend_set_state: LDO1: No configuration
[ 723.951416] suspend_set_state: LDO5: No configuration
[ 723.951660] suspend_set_state: VANA: No configuration
[ 723.952606] Suspending console(s) (use no_console_suspend to debug)
[ 723.997589] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 723.997619] PVR: SysSystemPrePowerState: Entering state D3
[ 723.997680] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 723.997741] PVR: DisableSystemClocks: Disabling System Clocks
[ 724.324188] PM: suspend of devices complete after 368.530 msecs
[ 724.326110] PM: late suspend of devices complete after 1.922 msecs
[ 724.326141] Disabling non-boot CPUs ...
[ 724.328094] CPU1: shutdown
[ 724.329956] Resume caused by IRQ 39, TWL6030-PIH
[ 724.329956] Successfully put all powerdomains to target state
[ 724.330108] Suspended for 15.951 seconds
[ 724.330535] Enabling non-boot CPUs ...
[ 724.347320] CPU1: Booted secondary processor
[ 724.350646] CPU1 is up
[ 724.352722] Switched to NOHz mode on CPU #1
[ 724.352783] PM: early resume of devices complete after 2.136 msecs
[ 725.017150] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 725.017181] PVR: SysSystemPostPowerState: Entering state D0
[ 725.017211] PVR: EnableSystemClocks: Enabling System Clocks
[ 725.017272] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 725.017517] wakeup wake lock: musb_autosuspend_wake_lock
[ 725.044189] PM: resume of devices complete after 690.826 msecs
[ 725.066375] PM: Finishing wakeup.
[ 725.066772] Restarting tasks ...
[ 725.068084] hub 1-0:1.0: activate --> -22
[ 725.075012] serio: Serial port ttyO3
[ 725.104919] done.
[ 725.106536] suspend: exit suspend, ret = 0 (2024-07-05 19:02:09.019622812 UTC)
[ 742.335327] PM: Syncing filesystems ... done.
[ 743.195465] PM: Preparing system for mem sleep
[ 743.196197] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 743.237884] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 743.261260] PM: Entering mem sleep
[ 743.261505] suspend_set_state: LDO3: No configuration
[ 743.261901] suspend_set_state: LDO4: No configuration
[ 743.263641] suspend_set_state: LDO1: No configuration
[ 743.264068] suspend_set_state: LDO5: No configuration
[ 743.264312] suspend_set_state: VANA: No configuration
[ 743.265228] Suspending console(s) (use no_console_suspend to debug)
[ 743.310272] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 743.310302] PVR: SysSystemPrePowerState: Entering state D3
[ 743.310363] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 743.310424] PVR: DisableSystemClocks: Disabling System Clocks
[ 743.628997] PM: suspend of devices complete after 360.748 msecs
[ 743.630950] PM: late suspend of devices complete after 1.922 msecs
[ 743.630981] Disabling non-boot CPUs ...
[ 743.640777] CPU1: shutdown
[ 743.642730] Wakeup IRQ 142 omap_emif pending, suspend aborted
[ 743.642761] Enabling non-boot CPUs ...
[ 743.659393] CPU1: Booted secondary processor
[ 743.662780] CPU1 is up
[ 743.664520] PM: early resume of devices complete after 1.708 msecs
[ 743.665222] Switched to NOHz mode on CPU #1
[ 744.314025] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 744.314086] PVR: SysSystemPostPowerState: Entering state D0
[ 744.314117] PVR: EnableSystemClocks: Enabling System Clocks
[ 744.314147] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 744.314422] wakeup wake lock: musb_autosuspend_wake_lock
[ 744.341033] PM: resume of devices complete after 675.933 msecs
[ 744.362457] PM: Finishing wakeup.
[ 744.362854] Restarting tasks ...
[ 744.365539] hub 1-0:1.0: activate --> -22
[ 744.373352] serio: Serial port ttyO3
[ 744.403900] done.
[ 744.410430] suspend: exit suspend, ret = -16 (2024-07-05 19:02:28.323516856 UTC)
[ 744.410827] active wake lock mmc1_detect
[ 744.411254] active wake lock musb_autosuspend_wake_lock
[ 748.658630] PM: Syncing filesystems ... done.
[ 749.019042] PM: Preparing system for mem sleep
[ 749.019775] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 749.058074] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 749.081512] PM: Entering mem sleep
[ 749.081756] suspend_set_state: LDO3: No configuration
[ 749.082153] suspend_set_state: LDO4: No configuration
[ 749.083862] suspend_set_state: LDO1: No configuration
[ 749.084259] suspend_set_state: LDO5: No configuration
[ 749.084503] suspend_set_state: VANA: No configuration
[ 749.085449] Suspending console(s) (use no_console_suspend to debug)
[ 749.130584] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 749.130615] PVR: SysSystemPrePowerState: Entering state D3
[ 749.130676] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 749.130737] PVR: DisableSystemClocks: Disabling System Clocks
[ 749.449157] PM: suspend of devices complete after 360.687 msecs
[ 749.451110] PM: late suspend of devices complete after 1.892 msecs
[ 749.451141] Disabling non-boot CPUs ...
[ 749.460845] CPU1: shutdown
[ 749.462890] Resume caused by IRQ 39, TWL6030-PIH
[ 749.462890] Successfully put all powerdomains to target state
[ 749.463043] Suspended for 20.867 seconds
[ 749.463470] Enabling non-boot CPUs ...
[ 749.480346] CPU1: Booted secondary processor
[ 749.483398] CPU1 is up
[ 749.485504] PM: early resume of devices complete after 2.075 msecs
[ 749.485687] Switched to NOHz mode on CPU #1
[ 750.103271] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 750.103302] PVR: SysSystemPostPowerState: Entering state D0
[ 750.103363] PVR: EnableSystemClocks: Enabling System Clocks
[ 750.103393] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 750.103637] wakeup wake lock: musb_autosuspend_wake_lock
[ 750.130249] PM: resume of devices complete after 644.073 msecs
[ 750.152435] PM: Finishing wakeup.
[ 750.152832] Restarting tasks ...
[ 750.154174] hub 1-0:1.0: activate --> -22
[ 750.162994] serio: Serial port ttyO3
[ 750.199066] done.
[ 750.199798] suspend: exit suspend, ret = 0 (2024-07-05 19:02:54.979949958 UTC)
[ 752.198669] PM: Syncing filesystems ... done.
[ 752.212860] PM: Preparing system for mem sleep
[ 752.213653] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 752.253570] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 752.277069] PM: Entering mem sleep
[ 752.277313] suspend_set_state: LDO3: No configuration
[ 752.277709] suspend_set_state: LDO4: No configuration
[ 752.279418] suspend_set_state: LDO1: No configuration
[ 752.279846] suspend_set_state: LDO5: No configuration
[ 752.280090] suspend_set_state: VANA: No configuration
[ 752.281005] Suspending console(s) (use no_console_suspend to debug)
[ 752.326080] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 752.326110] PVR: SysSystemPrePowerState: Entering state D3
[ 752.326171] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 752.326232] PVR: DisableSystemClocks: Disabling System Clocks
[ 752.644744] PM: suspend of devices complete after 360.656 msecs
[ 752.646697] PM: late suspend of devices complete after 1.922 msecs
[ 752.646728] Disabling non-boot CPUs ...
[ 752.648529] CPU1: shutdown
[ 752.650299] Resume caused by IRQ 39, TWL6030-PIH
[ 752.650299] Successfully put all powerdomains to target state
[ 752.650451] Suspended for 29.812 seconds
[ 752.650726] wakeup wake lock: alarm
[ 752.650939] Enabling non-boot CPUs ...
[ 752.667694] CPU1: Booted secondary processor
[ 752.670776] CPU1 is up
[ 752.672912] PM: early resume of devices complete after 2.075 msecs
[ 752.673278] Switched to NOHz mode on CPU #1
[ 753.337707] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 753.337768] PVR: SysSystemPostPowerState: Entering state D0
[ 753.337799] PVR: EnableSystemClocks: Enabling System Clocks
[ 753.337860] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 753.364532] PM: resume of devices complete after 690.978 msecs
[ 753.397430] PM: Finishing wakeup.
[ 753.397644] Restarting tasks ...
[ 753.399841] hub 1-0:1.0: activate --> -22
[ 753.425476] serio: Serial port ttyO3
[ 753.436431] done.
[ 753.437652] suspend: exit suspend, ret = 0 (2024-07-05 19:03:28.030426024 UTC)
[ 756.334808] PM: Syncing filesystems ... done.
[ 756.346984] PM: Preparing system for mem sleep
[ 756.347717] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 756.386352] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 756.409912] PM: Entering mem sleep
[ 756.410156] suspend_set_state: LDO3: No configuration
[ 756.410583] suspend_set_state: LDO4: No configuration
[ 756.412170] suspend_set_state: LDO1: No configuration
[ 756.412384] suspend_set_state: LDO5: No configuration
[ 756.412811] suspend_set_state: VANA: No configuration
[ 756.413513] Suspending console(s) (use no_console_suspend to debug)
[ 756.458770] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 756.458801] PVR: SysSystemPrePowerState: Entering state D3
[ 756.458862] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 756.458923] PVR: DisableSystemClocks: Disabling System Clocks
[ 756.777709] PM: suspend of devices complete after 360.992 msecs
[ 756.779663] PM: late suspend of devices complete after 1.922 msecs
[ 756.779693] Disabling non-boot CPUs ...
[ 756.781524] CPU1: shutdown
[ 756.783416] Resume caused by IRQ 39, TWL6030-PIH
[ 756.783416] Successfully put all powerdomains to target state
[ 756.783569] Suspended for 27.867 seconds
[ 756.783996] Enabling non-boot CPUs ...
[ 756.800781] CPU1: Booted secondary processor
[ 756.803863] CPU1 is up
[ 756.805969] PM: early resume of devices complete after 2.075 msecs
[ 756.806243] Switched to NOHz mode on CPU #1
[ 757.431610] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 757.431671] PVR: SysSystemPostPowerState: Entering state D0
[ 757.431701] PVR: EnableSystemClocks: Enabling System Clocks
[ 757.431732] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 757.432006] wakeup wake lock: musb_autosuspend_wake_lock
[ 757.458648] PM: resume of devices complete after 652.099 msecs
[ 757.491333] PM: Finishing wakeup.
[ 757.491577] Restarting tasks ...
[ 757.493713] hub 1-0:1.0: activate --> -22
[ 757.511474] serio: Serial port ttyO3
[ 757.524505] done.
[ 757.529022] suspend: exit suspend, ret = 0 (2024-07-05 19:03:59.988647457 UTC)
[ 760.022796] PM: Syncing filesystems ... done.
[ 760.035797] PM: Preparing system for mem sleep
[ 760.036529] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 760.073974] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 760.097564] PM: Entering mem sleep
[ 760.097808] suspend_set_state: LDO3: No configuration
[ 760.098236] suspend_set_state: LDO4: No configuration
[ 760.099914] suspend_set_state: LDO1: No configuration
[ 760.100158] suspend_set_state: LDO5: No configuration
[ 760.100585] suspend_set_state: VANA: No configuration
[ 760.101318] Suspending console(s) (use no_console_suspend to debug)
[ 760.146270] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 760.146301] PVR: SysSystemPrePowerState: Entering state D3
[ 760.146362] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 760.146423] PVR: DisableSystemClocks: Disabling System Clocks
[ 760.473175] PM: suspend of devices complete after 368.621 msecs
[ 760.475097] PM: late suspend of devices complete after 1.892 msecs
[ 760.475128] Disabling non-boot CPUs ...
[ 760.476928] CPU1: shutdown
[ 760.478424] Resume caused by IRQ 39, TWL6030-PIH
[ 760.478424] Successfully put all powerdomains to target state
[ 760.478576] Suspended for 29.305 seconds
[ 760.479003] Enabling non-boot CPUs ...
[ 760.495788] CPU1: Booted secondary processor
[ 760.498870] CPU1 is up
[ 760.500976] PM: early resume of devices complete after 2.044 msecs
[ 760.501708] Switched to NOHz mode on CPU #1
[ 761.127044] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 761.127105] PVR: SysSystemPostPowerState: Entering state D0
[ 761.127136] PVR: EnableSystemClocks: Enabling System Clocks
[ 761.127166] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 761.127441] wakeup wake lock: musb_autosuspend_wake_lock
[ 761.158905] PM: resume of devices complete after 657.409 msecs
[ 761.171600] PM: Finishing wakeup.
[ 761.171813] Restarting tasks ...
[ 761.174011] hub 1-0:1.0: activate --> -22
[ 761.191284] serio: Serial port ttyO3
[ 761.202423] done.
[ 761.203155] suspend: exit suspend, ret = 0 (2024-07-05 19:04:32.967773425 UTC)
[ 763.187133] PM: Syncing filesystems ... done.
[ 763.203399] PM: Preparing system for mem sleep
[ 763.208892] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 763.253936] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 763.277435] PM: Entering mem sleep
[ 763.277679] suspend_set_state: LDO3: No configuration
[ 763.278076] suspend_set_state: LDO4: No configuration
[ 763.279663] suspend_set_state: LDO1: No configuration
[ 763.279907] suspend_set_state: LDO5: No configuration
[ 763.280334] suspend_set_state: VANA: No configuration
[ 763.281036] Suspending console(s) (use no_console_suspend to debug)
[ 763.326232] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 763.326263] PVR: SysSystemPrePowerState: Entering state D3
[ 763.326324] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 763.326385] PVR: DisableSystemClocks: Disabling System Clocks
[ 763.652984] PM: suspend of devices complete after 368.682 msecs
[ 763.654907] PM: late suspend of devices complete after 1.922 msecs
[ 763.654937] Disabling non-boot CPUs ...
[ 763.656768] CPU1: shutdown
[ 763.658264] Resume caused by IRQ 39, TWL6030-PIH
[ 763.658264] Successfully put all powerdomains to target state
[ 763.658416] Suspended for 28.820 seconds
[ 763.658843] Enabling non-boot CPUs ...
[ 763.675598] CPU1: Booted secondary processor
[ 763.678710] CPU1 is up
[ 763.680816] PM: early resume of devices complete after 2.075 msecs
[ 763.681518] Switched to NOHz mode on CPU #1
[ 764.306884] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 764.306915] PVR: SysSystemPostPowerState: Entering state D0
[ 764.306945] PVR: EnableSystemClocks: Enabling System Clocks
[ 764.307006] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 764.307250] wakeup wake lock: musb_autosuspend_wake_lock
[ 764.333831] PM: resume of devices complete after 652.435 msecs
[ 764.366546] PM: Finishing wakeup.
[ 764.366790] Restarting tasks ...
[ 764.368957] hub 1-0:1.0: activate --> -22
[ 764.387512] serio: Serial port ttyO3
[ 764.402221] done.
[ 764.402801] suspend: exit suspend, ret = 0 (2024-07-05 19:05:04.987609852 UTC)
[ 767.023254] PM: Syncing filesystems ... done.
[ 767.035156] PM: Preparing system for mem sleep
[ 767.035705] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 767.074371] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 767.097869] PM: Entering mem sleep
[ 767.098114] suspend_set_state: LDO3: No configuration
[ 767.098327] suspend_set_state: LDO4: No configuration
[ 767.100067] suspend_set_state: LDO1: No configuration
[ 767.100311] suspend_set_state: LDO5: No configuration
[ 767.100738] suspend_set_state: VANA: No configuration
[ 767.101440] Suspending console(s) (use no_console_suspend to debug)
[ 767.146606] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 767.146636] PVR: SysSystemPrePowerState: Entering state D3
[ 767.146697] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 767.146759] PVR: DisableSystemClocks: Disabling System Clocks
[ 767.465637] PM: suspend of devices complete after 360.961 msecs
[ 767.467559] PM: late suspend of devices complete after 1.892 msecs
[ 767.467590] Disabling non-boot CPUs ...
[ 767.469360] CPU1: shutdown
[ 767.470886] Resume caused by IRQ 39, TWL6030-PIH
[ 767.470886] Successfully put all powerdomains to target state
[ 767.471038] Suspended for 29.187 seconds
[ 767.471466] Enabling non-boot CPUs ...
[ 767.488250] CPU1: Booted secondary processor
[ 767.491333] CPU1 is up
[ 767.493438] PM: early resume of devices complete after 2.075 msecs
[ 767.494110] Switched to NOHz mode on CPU #1
[ 768.135131] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 768.135192] PVR: SysSystemPostPowerState: Entering state D0
[ 768.135223] PVR: EnableSystemClocks: Enabling System Clocks
[ 768.135253] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 768.135498] wakeup wake lock: musb_autosuspend_wake_lock
[ 768.166992] PM: resume of devices complete after 673.004 msecs
[ 768.180145] PM: Finishing wakeup.
[ 768.180389] Restarting tasks ...
[ 768.182556] hub 1-0:1.0: activate --> -22
[ 768.199890] serio: Serial port ttyO3
[ 768.212066] done.
[ 768.212829] suspend: exit suspend, ret = 0 (2024-07-05 19:05:37.984985339 UTC)
[ 770.195068] PM: Syncing filesystems ... done.
[ 770.211853] PM: Preparing system for mem sleep
[ 770.218261] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 770.261810] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 770.285705] PM: Entering mem sleep
[ 770.285949] suspend_set_state: LDO3: No configuration
[ 770.286163] suspend_set_state: LDO4: No configuration
[ 770.288024] suspend_set_state: LDO1: No configuration
[ 770.288269] suspend_set_state: LDO5: No configuration
[ 770.288696] suspend_set_state: VANA: No configuration
[ 770.289459] Suspending console(s) (use no_console_suspend to debug)
[ 770.334655] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 770.334686] PVR: SysSystemPrePowerState: Entering state D3
[ 770.334747] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 770.334808] PVR: DisableSystemClocks: Disabling System Clocks
[ 770.661041] PM: suspend of devices complete after 368.316 msecs
[ 770.662994] PM: late suspend of devices complete after 1.892 msecs
[ 770.663024] Disabling non-boot CPUs ...
[ 770.664794] CPU1: shutdown
[ 770.666473] Resume caused by IRQ 39, TWL6030-PIH
[ 770.666473] Successfully put all powerdomains to target state
[ 770.666595] Suspended for 28.804 seconds
[ 770.667053] Enabling non-boot CPUs ...
[ 770.683837] CPU1: Booted secondary processor
[ 770.686889] CPU1 is up
[ 770.688995] PM: early resume of devices complete after 2.075 msecs
[ 770.689575] Switched to NOHz mode on CPU #1
[ 771.330566] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 771.330627] PVR: SysSystemPostPowerState: Entering state D0
[ 771.330657] PVR: EnableSystemClocks: Enabling System Clocks
[ 771.330688] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 771.330932] wakeup wake lock: musb_autosuspend_wake_lock
[ 771.357574] PM: resume of devices complete after 667.999 msecs
[ 771.390228] PM: Finishing wakeup.
[ 771.390472] Restarting tasks ...
[ 771.392639] hub 1-0:1.0: activate --> -22
[ 771.419647] serio: Serial port ttyO3
[ 771.430664] done.
[ 771.431427] suspend: exit suspend, ret = 0 (2024-07-05 19:06:10.008026104 UTC)
[ 774.385894] PM: Syncing filesystems ... done.
[ 774.421081] PM: Preparing system for mem sleep
[ 774.421661] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 774.464385] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 774.488952] PM: Entering mem sleep
[ 774.489196] suspend_set_state: LDO3: No configuration
[ 774.489440] suspend_set_state: LDO4: No configuration
[ 774.491180] suspend_set_state: LDO1: No configuration
[ 774.491424] suspend_set_state: LDO5: No configuration
[ 774.491851] suspend_set_state: VANA: No configuration
[ 774.492553] Suspending console(s) (use no_console_suspend to debug)
[ 774.537719] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 774.537750] PVR: SysSystemPrePowerState: Entering state D3
[ 774.537811] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 774.537872] PVR: DisableSystemClocks: Disabling System Clocks
[ 774.856475] PM: suspend of devices complete after 360.687 msecs
[ 774.858398] PM: late suspend of devices complete after 1.892 msecs
[ 774.858428] Disabling non-boot CPUs ...
[ 774.860229] CPU1: shutdown
[ 774.862213] Resume caused by IRQ 39, TWL6030-PIH
[ 774.862213] Successfully put all powerdomains to target state
[ 774.862365] Suspended for 27.804 seconds
[ 774.862792] Enabling non-boot CPUs ...
[ 774.879608] CPU1: Booted secondary processor
[ 774.882659] CPU1 is up
[ 774.884796] PM: early resume of devices complete after 2.075 msecs
[ 774.885040] Switched to NOHz mode on CPU #1
[ 775.533843] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 775.533874] PVR: SysSystemPostPowerState: Entering state D0
[ 775.533905] PVR: EnableSystemClocks: Enabling System Clocks
[ 775.533966] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 775.534210] wakeup wake lock: musb_autosuspend_wake_lock
[ 775.560821] PM: resume of devices complete after 675.384 msecs
[ 775.593536] PM: Finishing wakeup.
[ 775.593750] Restarting tasks ...
[ 775.595916] hub 1-0:1.0: activate --> -22
[ 775.614501] serio: Serial port ttyO3
[ 775.626159] done.
[ 775.626922] suspend: exit suspend, ret = 0 (2024-07-05 19:06:42.007812478 UTC)
[ 778.023223] PM: Syncing filesystems ... done.
[ 778.035186] PM: Preparing system for mem sleep
[ 778.035736] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 778.074768] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 778.098449] PM: Entering mem sleep
[ 778.098693] suspend_set_state: LDO3: No configuration
[ 778.098907] suspend_set_state: LDO4: No configuration
[ 778.100799] suspend_set_state: LDO1: No configuration
[ 778.101013] suspend_set_state: LDO5: No configuration
[ 778.101440] suspend_set_state: VANA: No configuration
[ 778.102203] Suspending console(s) (use no_console_suspend to debug)
[ 778.147491] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 778.147521] PVR: SysSystemPrePowerState: Entering state D3
[ 778.147583] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 778.147644] PVR: DisableSystemClocks: Disabling System Clocks
[ 778.458190] PM: suspend of devices complete after 352.783 msecs
[ 778.460144] PM: late suspend of devices complete after 1.922 msecs
[ 778.460174] Disabling non-boot CPUs ...
[ 778.461975] CPU1: shutdown
[ 778.463623] Resume caused by IRQ 39, TWL6030-PIH
[ 778.463623] Successfully put all powerdomains to target state
[ 778.463775] Suspended for 29.398 seconds
[ 778.464202] Enabling non-boot CPUs ...
[ 778.480926] CPU1: Booted secondary processor
[ 778.483978] CPU1 is up
[ 778.486083] PM: early resume of devices complete after 2.044 msecs
[ 778.486724] Switched to NOHz mode on CPU #1
[ 779.135528] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 779.135559] PVR: SysSystemPostPowerState: Entering state D0
[ 779.135589] PVR: EnableSystemClocks: Enabling System Clocks
[ 779.135650] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 779.135894] wakeup wake lock: musb_autosuspend_wake_lock
[ 779.167388] PM: resume of devices complete after 680.755 msecs
[ 779.180480] PM: Finishing wakeup.
[ 779.180725] Restarting tasks ...
[ 779.182891] hub 1-0:1.0: activate --> -22
[ 779.207824] serio: Serial port ttyO3
[ 779.216674] done.
[ 779.217651] suspend: exit suspend, ret = 0 (2024-07-05 19:07:14.996887180 UTC)
[ 781.195220] PM: Syncing filesystems ... done.
[ 781.208679] PM: Preparing system for mem sleep
[ 781.209259] Freezing user space processes ... (elapsed 0.06 seconds) done.
[ 781.270172] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 781.293884] PM: Entering mem sleep
[ 781.294128] suspend_set_state: LDO3: No configuration
[ 781.294342] suspend_set_state: LDO4: No configuration
[ 781.296264] suspend_set_state: LDO1: No configuration
[ 781.296508] suspend_set_state: LDO5: No configuration
[ 781.296905] suspend_set_state: VANA: No configuration
[ 781.297668] Suspending console(s) (use no_console_suspend to debug)
[ 781.342895] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 781.342926] PVR: SysSystemPrePowerState: Entering state D3
[ 781.342987] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 781.343048] PVR: DisableSystemClocks: Disabling System Clocks
[ 781.661437] PM: suspend of devices complete after 360.504 msecs
[ 781.663360] PM: late suspend of devices complete after 1.892 msecs
[ 781.663391] Disabling non-boot CPUs ...
[ 781.665130] CPU1: shutdown
[ 781.666839] Resume caused by IRQ 39, TWL6030-PIH
[ 781.666839] Successfully put all powerdomains to target state
[ 781.666992] Suspended for 28.796 seconds
[ 781.667419] Enabling non-boot CPUs ...
[ 781.684204] CPU1: Booted secondary processor
[ 781.687255] CPU1 is up
[ 781.689331] PM: early resume of devices complete after 2.044 msecs
[ 781.689941] Switched to NOHz mode on CPU #1
[ 782.338745] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 782.338806] PVR: SysSystemPostPowerState: Entering state D0
[ 782.338836] PVR: EnableSystemClocks: Enabling System Clocks
[ 782.338867] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 782.339141] wakeup wake lock: musb_autosuspend_wake_lock
[ 782.365814] PM: resume of devices complete after 675.872 msecs
[ 782.398468] PM: Finishing wakeup.
[ 782.398681] Restarting tasks ...
[ 782.400848] hub 1-0:1.0: activate --> -22
[ 782.419067] serio: Serial port ttyO3
[ 782.430419] done.
[ 782.431182] suspend: exit suspend, ret = 0 (2024-07-05 19:07:47.007415742 UTC)
[ 785.023529] PM: Syncing filesystems ... done.
[ 785.035125] PM: Preparing system for mem sleep
[ 785.035705] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 785.075012] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[ 785.098632] PM: Entering mem sleep
[ 785.098876] suspend_set_state: LDO3: No configuration
[ 785.099090] suspend_set_state: LDO4: No configuration
[ 785.100830] suspend_set_state: LDO1: No configuration
[ 785.101074] suspend_set_state: LDO5: No configuration
[ 785.101501] suspend_set_state: VANA: No configuration
[ 785.102233] Suspending console(s) (use no_console_suspend to debug)
[ 785.147491] PVR: PVRSRVDriverSuspend(pDevice=ee91c800)
[ 785.147521] PVR: SysSystemPrePowerState: Entering state D3
[ 785.147583] PVR: Uninstalling device LISR on IRQ 53 with cookie edda4300
[ 785.147644] PVR: DisableSystemClocks: Disabling System Clocks
[ 785.466247] PM: suspend of devices complete after 360.778 msecs
[ 785.468200] PM: late suspend of devices complete after 1.892 msecs
[ 785.468231] Disabling non-boot CPUs ...
[ 785.470001] CPU1: shutdown
[ 785.471710] Resume caused by I/O pad: CONTROL_PADCONF_WAKEUPEVENT_0[8]
[ 785.471710] Successfully put all powerdomains to target state
[ 785.471862] Suspended for 5.749 seconds
[ 785.472259] usb ta_nconnected_irq : VBUS OFF
[ 785.472534] Enabling non-boot CPUs ...
[ 785.489288] CPU1: Booted secondary processor
[ 785.492340] CPU1 is up
[ 785.494445] PM: early resume of devices complete after 2.075 msecs
[ 785.494781] Switched to NOHz mode on CPU #1
[ 785.495117] wakeup wake lock: vbus-espresso_otg
[ 785.495178] [BAT_MANAGER] Charger Disconnect
[ 785.495300] charger_detect_work: cable flag : 0, cable_type : 0
[ 785.495330] cable detect:TA detach, current device = 0x0000
[ 786.190429] PVR: PVRSRVDriverResume(pDevice=ee91c800)
[ 786.190490] PVR: SysSystemPostPowerState: Entering state D0
[ 786.190521] PVR: EnableSystemClocks: Enabling System Clocks
[ 786.190582] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie edda4300
[ 786.217193] PM: resume of devices complete after 714.263 msecs
[ 786.239318] PM: Finishing wakeup.
[ 786.239898] Restarting tasks ...
[ 786.241027] hub 1-0:1.0: activate --> -22
[ 786.254302] serio: Serial port ttyO3
[ 786.303100] done.
[ 786.304107] suspend: exit suspend, ret = 0 (2024-07-05 19:07:56.629943811 UTC)
[ 786.913238] request_suspend_state: wakeup (3->0) at 786887268115 (2024-07-05
19:07:57.239105189 UTC)
[ 787.223236] tsp: No attached cable
[ 787.223510] DSSCOMP: dsscomp_late_resume
[ 787.552520] usb ta_nconnected_irq : VBUS ON
[ 787.553466] [BAT_MANAGER] Charger Connected
[ 787.797515] dhd_set_suspend: Remove extra suspend setting
[ 787.923187] accel_open_calibration: Can't open calibration file
[ 788.138580] adc_check_1 adc=812
[ 788.148712] adc_check_1 adc=2933
[ 788.159057] adc_check_1 adc=1040
[ 788.171356] adc_check_1 adc=430
[ 788.180999] adc_check_1 adc=4095
[ 788.181091] check_charger_type: Charger type is [AC], adc = 1595
[ 788.181396] charger_detect_work: cable flag : 1, cable_type : 2
[ 788.193756] smb347-charger 5-0006: charging current limit set to 1.8A
[ 788.193908] cable detect:TA attach, current device = 0x0100
[ 788.194000] espresso_con_ta_charger_attached, USB_EVENT_CHARGER
[ 788.195831] tsp: TA attached
[ 798.920288] accel_open_calibration: Can't open calibration file
[ 798.970001] request_suspend_state: sleep (0->3) at 798944000292 (2024-07-05
19:08:09.295806849 UTC)
[ 798.972534] DSSCOMP: dsscomp_early_suspend
[ 798.999084] DSSCOMP: blanked screen
[ 799.161499] dhd_set_suspend: force extra Suspend setting
[ 1943.147918] dhd_set_suspend: Remove extra suspend setting
[ 1943.191772] request_suspend_state: wakeup (3->0) at 1943165802051 (2024-07-05
19:27:13.517639125 UTC)
[ 1943.504180] tsp: TA attached
[ 1943.839538] DSSCOMP: dsscomp_late_resume
[ 1943.866638] accel_open_calibration: Can't open calibration file
[ 2018.635070] accel_open_calibration: Can't open calibration file
[ 2018.681762] request_suspend_state: sleep (0->3) at 2018655761767 (2024-07-05
19:28:29.007598841 UTC)
[ 2018.683654] DSSCOMP: dsscomp_early_suspend
[ 2018.696228] DSSCOMP: blanked screen
[ 2018.804595] dhd_set_suspend: force extra Suspend setting
[ 2240.977600] dhd_set_suspend: Remove extra suspend setting
[ 2241.090972] request_suspend_state: wakeup (3->0) at 2241064971973 (2024-07-05
19:32:11.416809047 UTC)
[ 2241.091308] accel_open_calibration: Can't open calibration file
[ 2241.420349] tsp: TA attached
[ 2241.753570] DSSCOMP: dsscomp_late_resume
[ 2305.539581] accel_open_calibration: Can't open calibration file
[ 2305.590362] request_suspend_state: sleep (0->3) at 2305564392138 (2024-07-05
19:33:15.916229212 UTC)
[ 2305.590698] DSSCOMP: dsscomp_early_suspend
[ 2305.599243] DSSCOMP: blanked screen
[ 2305.631561] dhd_set_suspend: force extra Suspend setting
[ 2649.793762] binder: 493:571 transaction failed 29189, size 320-0
[ 2902.457122] dhd_set_suspend: Remove extra suspend setting
[ 2902.570159] accel_open_calibration: Can't open calibration file
[ 2902.571166] request_suspend_state: wakeup (3->0) at 2902545196581 (2024-07-05
19:43:12.897033655 UTC)
[ 2902.880035] tsp: TA attached
[ 2903.213653] DSSCOMP: dsscomp_late_resume
[ 2913.082702] accel_open_calibration: Can't open calibration file
[ 2913.218322] request_suspend_state: sleep (0->3) at 2913192291308 (2024-07-05
19:43:23.544128382 UTC)
[ 2913.226196] DSSCOMP: dsscomp_early_suspend
[ 2913.244018] DSSCOMP: blanked screen
[ 2913.584167] dhd_set_suspend: force extra Suspend setting
[ 2915.047119] dhd_set_suspend: Remove extra suspend setting
[ 2915.166198] accel_open_calibration: Can't open calibration file
[ 2915.166290] request_suspend_state: wakeup (3->0) at 2915140319872 (2024-07-05
19:43:25.492156946 UTC)
[ 2915.480651] tsp: TA attached
[ 2915.816131] DSSCOMP: dsscomp_late_resume
[ 3203.941497] type=1400 audit(1720208894.258:19): avc: denied { getattr } for
pid=4252 comm="ps" path="/proc/106" dev=proc ino=50750 scontext=u:r:init:s0
tcontext=u:r:logd:s0 tclass=dir permissive=1
[ 3326.913940] accel_open_calibration: Can't open calibration file
[ 3326.962463] request_suspend_state: sleep (0->3) at 3326936462451 (2024-07-05
19:50:17.288299525 UTC)
[ 3326.962799] DSSCOMP: dsscomp_early_suspend
[ 3326.980712] DSSCOMP: blanked screen
[ 3328.049804] dhd_set_suspend: force extra Suspend setting
[ 3369.660675] dhd_set_suspend: Remove extra suspend setting
[ 3369.785003] accel_open_calibration: Can't open calibration file
[ 3369.785797] request_suspend_state: wakeup (3->0) at 3369759826709 (2024-07-05
19:51:00.111663783 UTC)
[ 3370.108001] tsp: TA attached
[ 3370.440246] DSSCOMP: dsscomp_late_resume