2B: BILL OF QUANTITIES WITH GENERAL

SPECIFICATIONS
(CIVIL WORKS)

Page 199 of 316

 YRG CARE
CHENNAI
TAMIL NADU

Summary Sheet

Sr. No. Scope Description Cost Total Cost/SF %

1 EARTHWORKS ₹ 24,93,343 ₹ 46 1.57%

2 CONCRETE (RCC) WORKS ₹ 6,54,62,383 ₹ 1,210 41.28%

3 WATERPROOFING WORKS ₹ 43,48,205 ₹ 80 2.74%

4 MASONRY WORKS ₹ 19,18,984 ₹ 35 1.21%

5 PLASTER WORKS ₹ 30,77,656 ₹ 57 1.94%

6 SILL & JAMB WORKS ₹ 3,28,840 ₹ 6 0.21%

7 FAÇADE WORKS ₹ 2,01,49,812 ₹ 372 12.71%

8 WINDOW WORKS ₹ 7,05,012 ₹ 13 0.44%

9 GLAZING WORKS ₹ 88,75,953 ₹ 164 5.60%

10 FABRICATION WORKS ₹ 46,69,573 ₹ 86 2.94%

11 GYPSUM WORKS ₹ 29,31,756 ₹ 54 1.85%

12 CEILING WORKS ₹ 55,79,729 ₹ 103 3.52%

13 FLOORING & TILING WORKS ₹ 1,09,84,499 ₹ 203 6.93%

14 DOOR WORKS ₹ 39,29,482 ₹ 73 2.48%

15 PARTITION WORKS ₹ 39,25,018 ₹ 73 2.48%

16 TOILET WORKS ₹ 10,99,980 ₹ 20 0.69%

17 PAINTING WORKS ₹ 38,85,879 ₹ 72 2.45%

18 EQUIPMENT WORK ₹ 92,04,000 ₹ 170 5.80%

19 SIGNAGE ₹ 13,50,000 ₹ 25 0.85%

20 FIXED FURNITURE ₹ 6,60,000 ₹ 12 0.42%

21 LOOSE FURNITURE ₹ 29,92,487 ₹ 55 1.89%

SUB TOTAL (A) ₹ 15,85,72,590 ₹ 2,931 100%

22 FIRE WORKS ₹ 54,71,743 ₹ 101 3.45%

23 PLUMBING Works ₹ 73,41,495 ₹ 136 4.63%

24 ELECTRICAL ₹ 5,52,67,658 ₹ 1,022 34.85%

25 HVAC ₹ 1,87,77,623 ₹ 347 11.84%

SUB TOTAL (B) ₹ 8,68,58,519 ₹ 1,606

TOTAL (A+B) ₹ 24,54,31,109 ₹ 4,537

A Exclusions:
1 GST.

B Notes
1 Steel Constant - 5.00 kg/sf.
Concrete, Waterproofing, Masonry, Plaster & Sill & Jamb Rates are based on
2
SSR 2022-23.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
1 EARTHWORKS ₹ 24,93,343
01 01 01 Lead and Lift as per the Local conditions and site earmarked by the Municipal Corporation. -
01 01 02 Dewatering of the excavated trenches/pits, pools of water, well by using pumps and other devices including disposing of water to safe
-
distance as directed by Engineer-in-Charge including cost of machinery, labor, fuel, pipe and its accessories etc. complete.
01 01 03 Handling/supporting/relocating the existing utilities such as cables, drains, pipes, water mains etc. to working condition. -
01 01 04 Royalty and Taxes, if Any are to be included in the Rate. Only GST shall be paid separately. -
01 01 05 Obtaining necessary Approvals and Permissions, if any for Construction related activities lies with the Contractor. -
01 01 06 Concrete cast in situ TBM of 0.6m x 0.6m X 0.6m as specified by ENGINEER-IN-CHARGE -
01 01 07 Contractor should visit the site to understand the scope/challenges/extent of demolition/dismantling work before quoting the rate -
Block Excavation
Block Excavation up to specified level from Ground Level in the following strata by suitable mechanical means like Poclain, JCB etc. and
manually wherever required. The Scope includes carting away and disposing the same, within premises, if applicable, in consultation with
the Engineer-In-Charge. The Rate shall include installing and maintaining proper dewatering with pumping etc. system on a regular basis,
if required to ensure a clear working area to facilitate excavation activity. Obtaining necessary statutory permissions viz. drainage
approval, cost of royalty etc. as applicable from the local jurisdiction maintaining all the related records. The carting / loaded vehicle shall
01 03 00 be covered with plastic / tarpaulin sheet to avoid fall of any excavated material on road, cleaning vehicle tires before moving out of site ₹ 13,63,147
etc. complete. The Rate includes all costs for any shoring or strutting if required to retain the excavated soil in posiion for further
concreting purposes. The Rate shall also include satisfying all safety norms, general housekeeping, keeping the area neat and clean to
avoid mosquito breeding. Back filling around the retaining wall of basement etc. complete as per the requirement. The Contractor shall be
paid for the excavation on the basis of (plan area as shown in the working drawing + 2000 mm from the outer face of the retaining wall on
all sides) X depth of excavation or the actually excavated area at site whichever is lower. (Rate to include cleaning the site & lining out
the building raft footprint/columns/retaining walls etc. using total station survey as per Architectural lineout plan)
01 03 01 Soil, Soft Murum & Clay soil (upto 1.5m) 1,771 M3 ₹ 207 ₹ 3,66,567
01 03 02 Extra Over the Above Items for Lift from 1.5 - 3m 2,152 M3 ₹ 258 ₹ 5,55,340
01 03 03 Extra Over the Above Items for Lift from 3.0 - 4.5m 619 M3 ₹ 284 ₹ 1,75,753
01 03 04 Extra Over the Above Items for Lift from 4.5 - 6m 619 M3 ₹ 429 ₹ 2,65,486
01 07 00 External Material Backfilling
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm
501 M3 ₹ 599 ₹ 2,99,885
including watering and compaction etc. complete.

01 08 00 Dry Rubble Soling

Providing Dry rubble Stone soling of 150 to 230 mm thick, including hand packing, and compacting each Stone, filling in interstices,
290 M3 ₹ 2,160 ₹ 6,25,862
watering for further operations, etc., complete.

01 09 00 Barricading in Corrugated Sheets

Providing & fabricating 6m wide entry gate, barricades and dust proofing up to 10’ height from the ground level around the entire site by
using structural Steel tubes, green color coated sheets Cladding & Netlon mesh, safety banners/ two project information poster acrylic 121 RM ₹ 250 ₹ 30,168
board of A0 size etc. complete.

01 10 00 Posters on Barricade (4'X8' Flex Panels)

Providing & Installing Banners/Posters/ Flex Boards over the Barricading of 4’X8’ Size mounted on 35X35mm MS Supporting Frame with 13 EACH ₹ 450 ₹ 5,940
top mounted Halogen light, as per the Artwork/ graphics provided by Architect complete.
01 11 00 Anti-Termite Treatment
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and
around the raft/footing, column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along
the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of 1,559 M2 ₹ 108 ₹ 1,68,342
pipes and conduits, with Chlorpyriphos emulsifiable concentrates of 20 % concentration, including cost of chemical, diluting in water to
one percent concentration, labor, HOM of equipment, complete as per specifications. (Sqm area under Raft of the building/Retaining
walls only shall be measured)
2 CONCRETE (RCC) WORKS ₹ 6,54,62,383
02 01 01 The RCC quoted Rate shall be valid for all heights, levels and shapes for all the Structural members viz. Columns, Beams, Slabs etc. as
-
per the drawing.
02 01 02 Reinforcing Steel is treated as separate item and shall be excluded from Concrete scope and shall be paid separately. -

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 1
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
02 01 03 If there is change in grade of Concrete only difference amount for Cement + 15% will be paid/recovered from the quoted Rate of
respective item. The contractor shall prepare the Rate Analysis and Calculation Sheet for the same based on basic Rate and design mix -
and submit the same to the Architect.
02 01 04 Slab Lineout of every floor and floor to floor Levels to be established using Total Station Survey at all corners of the Slab at all levels and
-
to be verified by the Architect.
02 01 05 For Form finish Concrete, the free-flowing Concrete and Admixtures Rates are to be included. -
02 01 06 After concreting the Concrete shall be covered with hessian cloth for overnight before ponding is done for curing of slabs. -
02 01 07 The Contractor shall finish the surface of green Concrete to ensure smooth levelled surface using Power Trowels and Floaters with
specified Hardening chemicals as specified in Technical Specification. The item is to be included in the slab and will not be paid -
separately.
02 01 08 Contractor shall do the Concrete by RMC or site mix with the quoted Rates of respective items and can use Crushed Sand in the Mix -
02 01 09 Grade of Concrete with minimum Cementitious content shall be as mentioned in the IS Code. -
02 01 10 Mix design to be approved by the Consultant prior to its use. -
02 01 11 For Shuttering/Formwork Measurements in case of Form finish, the Quantity shall be calculated/ measured based on the “Finished
Surface Area/Face of RCC Element in Sqm” of the “Actual Columns, Beams, Slabs or RCC Work” for which the Shuttering is used and
shall be calculated after deshuttering of the respective element. In the case of Beams, only three exposed faces shall be considered for -
measurement. There should not be any overlap in Measurements and only surface areas which come in contact with Shuttering shall be
measured.
02 01 12 Contractor shall get approval on the condition of Formwork/ Shuttering from ENGINEER-IN-CHARGE and or replace any
-
Shuttering/Plywood that is deemed inappropriate by Site Engineer or Architect at his own cost.
02 01 13 The Steel quantity may vary at the time of execution based on Structural Designer’s Input and shall be paid accordingly. -
02 03 00 PCC Works, (M-15 Grade)
Providing and laying in position at all levels Plain Cement Concrete (PCC) of specified grade and downsize graded granite metal,
machine mixed, Concrete, laid in layers not exceeding 15 cms, thick, well compacted, in foundation, plinth, sunk slabs etc., including cost 290 M3 ₹ 6,359 ₹ 18,42,527
of all materials, labor, machinery and curing complete as per specifications. If any nominal Steel is used, the Contractor shall be
reimbursed for the actual cost of the Steel plus 15% profits as per the receipts.
02 04 00 Concrete Works with Formwork & Labor (Steel Not Included)
Providing and laying in position Ready Mixed Concrete or of specified Grade for Reinforced Cement Concrete works, using Cement
content as per approved design mix, using waterproof ply 12mm thk. The film faced waterproof shuttering plywood shall be used with
repetitions for max. 5 times on each face. The scope is including pumping of Concrete to site of laying, the cost of centering, shuttering,
finishing, labor, admixtures in recommended proportions as per IS: 9103 to Accelerate, retard setting of Concrete, consolidation by
rodding, vibrating by an approved mechanical vibrator etc. protecting, curing including hacking, roughening of Concrete surface for
receiving Plaster or any other finish including costs of all tests on all materials & Concrete and excluding Reinforcement, as per direction
of Engineer-in-charge. The Mix design as per specifications shall be approved by EIC. The Rate shall include cost of all specified
materials and operations at all levels and heights, including the cost of centering, shuttering and excluding Reinforcement. Formwork
shall include shuttering, centering, propping, wedging, sealing the gaps by tapeing etc. All propping and centering should be either of
Steel tubes with extension pieces. All Formwork shall be surface treated and coated with suitable mould oil.Shuttering used shall be of
sufficient stiffness to avoid excessive deflection and joints shall be tightly butted or taped. The completed Formwork shall approved by
the Structural Engineer before the Reinforcement bars are placed. Proper Formwork should be adopted for concreting to avoid honey ₹ 3,34,91,010
combing, blow holes, seepage of Concrete through joints or discoloration of Concrete.The two shutters of the wall are to be kept in place
by appropriate ties and studs. In the case of cantilever slabs and beams, the Centering shall remain till structures have attained sufficient
strength. Work damaged through premature or careless removal of forms be reconstructed within 24 hrs. The quoted Rate shall be valid
for all heights, levels and shapes for all the structural members.Contractor shall do the Concrete by RMC or site mix with the quoted
Rates of respective items. The Rate for RCC work shall include for forming projections, elevational treatment, cornices and Architectural
features, sinking of floors in toilets wherever directed, forming opening/cut-outs or niches, providing dowel bars, chamfering columns with
wooden battens of varying sizes & shape as shown in detail typical section drawing and also coordinating with other agencies for laying
conduits, boxes, pipes, clamps etc. as directed.

02 04 01 Footing (M-30 Grade) 90 M3 ₹ 7,287 ₹ 6,54,963

02 04 02 Raft (M-30 Grade) 231 M3 ₹ 7,471 ₹ 17,25,883
02 04 03 Piles (600mm Dia, M-30 Grade) 64 M3 ₹ 5,487 ₹ 3,50,007
02 04 04 Retaining Wall (M-30 Grade) 128 M3 ₹ 15,750 ₹ 20,19,749
05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 2
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
02 04 05 Shear Wall (M-30 Grade) 402 M3 ₹ 15,750 ₹ 63,31,075
02 04 06 Columns (M- 30 Grade) 167 M3 ₹ 14,150 ₹ 23,64,790
02 04 07 Beams (M-30 Grade) 111 M3 ₹ 12,635 ₹ 13,97,216
02 04 08 Lintels (M-30 Grade) 7 M3 ₹ 12,635 ₹ 84,086
02 04 09 Slab (M-30 Grade) 63 M3 ₹ 14,299 ₹ 8,98,435
02 04 10 Staircase (M-30 Grade) 28 M3 ₹ 14,299 ₹ 4,06,592
02 04 11 Chajja (M-30 Grade) 135 M3 ₹ 14,116 ₹ 19,05,237
02 04 12 Parapet & Return Walls (M-30 Grade) 239 M3 ₹ 15,750 ₹ 37,56,580
02 04 16 PT Beam (M-30 Grade) 211 M3 ₹ 12,269 ₹ 25,90,943
02 04 17 PT Slab (M-30 Grade) 728 M3 ₹ 12,269 ₹ 89,26,998
02 04 19 Coping (M-30 Grade) 11 M3 ₹ 7,190 ₹ 78,457
02 05 00 Form Finish Shuttering & Formwork Only (Extra Rate Over Base Concrete Rate)
Providing and laying uniform new/fresh Centering and Shuttering/Formwork including strutting, propping etc. and removal of form for
Architectural Form finished Concrete work using waterproof ply 12mm thick conforming to IS:710. The waterproof ply shall be used for
only two repetitions for each face after first use, and any repetition after the third usage shall be taken up only after prior approval by the
Engineer-in-Charge.
The scope shall include creating groves for RCC work, chamfering column edges with wooden battens of varying sizes & shape as ₹ 10,58,539
shown in detail typical section drawing as and were directed by the Architect complete. Formwork shall be made up of film faced
waterproof shuttering plywood with minimum thickness not less than 12mm and MS Sheet metal Formwork for Round Elements such as
Columns or Curved Walls and shall include all temporary or permanent forms or molds required for forming the Concrete which is cast-in-
situ. It shall be strong enough to withstand the dead and live loads and forces caused by ramming and vibrations of Concrete and other
incidental loads.
02 05 01 Additional Plywood Formwork, Slabs/ Landings/ Chajjas/ Staircases 574 M2 ₹ 1,076 ₹ 6,17,481
02 05 02 Additional Plywood Shuttering, Columns/ Beams/ Lintels 410 M2 ₹ 1,076 ₹ 4,41,058
02 06 00 Special Decorative Shuttering/Formwork
Providing uniform good quality specialized manufactured Shuttering/Formwork made up of specified material as per Architectural design
and drawing for RCC work etc. complete (RCC quantities will be paid as per relevant items in BOQ) to the satisfaction of Architect. The
quoted Rate shall be including the fabrication/carpentry work, laser cutting, materials, oiling etc. and shall be valid for all heights, levels ₹ 74,933
and shapes for all the structural members viz. columns, beams, slabs etc. as per the drawing. The Contractor shall quote only the Rate
Difference that is additional extra cost of material and labor used over and above items in Concrete Works + 15% profit, for Decorative
Shuttering over the base Rate of Shuttering included in items 02 04 00. There shall be no duplication of measurements.
02 06 01 Special Shuttering, Retaining/ Shear Walls 300 M2 ₹ 250 ₹ 74,933
02 07 00 Plum Concrete Works
Providing & laying M10 Plum Concrete (rubble volume up to 40% of Plum Concrete volume) as per specifications with Aggregate Stone
in average size and shape with necessary compaction including dewatering, curing & cleaning, shuttering etc. complete. Cement content 290 M3 ₹ 4,000 ₹ 11,59,004
shall be as specified in the IS Code.

02 08 00 Core-cuts
Provision of Core-cuts as per the drawing in the RCC member of the required Dia. as per the requirement of Engineer in charge. Rate ₹ 19,195
shall include all necessary manpower, marking of holes as per the drawings, water, cleaning etc. complete.
02 08 01 Core-cut 63mm Dia 6 EACH ₹ 650 ₹ 3,575
02 08 02 Core-cut 122mm Dia 7 EACH ₹ 750 ₹ 4,950
02 08 03 Core-cut 162mm Dia 4 EACH ₹ 850 ₹ 3,740
02 08 04 Core-cut 250mm Dia 2 EACH ₹ 1,200 ₹ 2,640
02 08 05 Core-cut 300mm Dia 3 EACH ₹ 1,300 ₹ 4,290
02 09 00 PVC Sleeves, 450mm Depth
Providing and laying in position PVC Sleeves of specified diameter below, laid in beams/slabs tightly secured together to the
Reinforcement by Binding Wire so that the sleeves do not get displaced during the compaction of Concrete, at the locations shown on
Services/RCC/Architectural drawings. The Sleeves should be filled with removable material such as thermocol to avoid seepage of Wet ₹ 6,914
Concrete into the sleeves. The Rate shall include material and labor. For measurements, quantity of number of sleeves will be calculated
and paid for and is irrespective of the diameter or length of sleeve. Contractors can consider an avg diameter of 150mm and length of
300mm for calculation purposes.
02 09 01 PVC Pipe 90mm Dia 11 EACH ₹ 188 ₹ 2,063
05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 3
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
02 09 02 PVC Pipe 110mm Dia 9 EACH ₹ 199 ₹ 1,753
02 09 03 PVC Pipe 160mm Dia 4 EACH ₹ 288 ₹ 1,265
02 09 04 PVC Pipe 200mm Dia 2 EACH ₹ 834 ₹ 1,834
02 10 00 PVC Conduits with Joints/Bends/Junctions, 32mm Dia
Providing and laying in position PVC Conduits of 32mm Diameter with necessary bends, junctions/boxes laid in RCC Walls/Beams/Slabs
tightly secured together to the Reinforcement by Binding Wire so that the conduits do not get displaced during the compaction of
11,000 RM ₹ 120 ₹ 13,20,000
Concrete, at the locations shown on services/RCC drawings. The conduits should be inspected by ENGINEER-IN-CHARGE before
concrete works. The Rate shall include material and labor. For measurements, length of conduits will be calculated and paid for and is
irrespective of the number of bends/junctions/Boxes used.
02 12 00 Water-Stopper, Dumb-Bell type, 300mm X 6mm
Providing and fixing dumbbell/Serrated type PVC Waterstopper of specified size of approved make in Reinforced Cement Concrete as a
physical barrier to water at Concrete joints in the Retaining Walls of basement, walls of underground water tank/ overhead water 229 RM ₹ 450 ₹ 1,03,158
tank/swimming pool etc. as per the procedure laid down by the manufacturer. The Rate shall include for the required overlaps and
sealing of overlaps with Polysulphide jointing compound of approved make as directed by the ENGINEER-IN-CHARGE.
02 13 00 MS (TMT) FE-500 Reinforcement Works (Approx. Volume of Concrete to Steel Ratio)
Providing, cutting, bending to shape, placing, fabricating, welding/fixing and tying in position Reinforcement Steel of TMT-FE 500D grade
in all RCC works at all Levels including supplying and tying with 18 gauge GI Binding Wire in positions including cost of Binding Wire in
all floors and levels as per detailed designs, drawings and bar bending schedules, including straightening, cutting, bending, hooking the
bars, binding with wires or tack welding, supporting as required etc. all complete at all levels as per structural drawings and to the
satisfaction of Structural Engineer.
The Steel used for Reinforcement shall be any of the following types:
(a) Mild Steel and medium tensile bars conforming to IS 432 (Part I)
(b) High strength deformed Steel bars conforming to IS 1786
(c) Structural Steel conforming to Grade A of IS 2062
(d) Thermo-mechanically treated (TMT) Bars 270 MT ₹ 85,400 ₹ 2,31,00,552
The Rate includes providing of cover block, cost of all operation and all inputs of labor, materials, and tools and plants etc. However, for
payment the actual quantity for Reinforcement bars and authentic laps provided (but excluding M.S. hooks, spacer bars, chairs, pins,
temporary fixing & supports etc.) shall be measured & paid.
All Steel bar Reinforcement is in lengths not exceeding 12 meters unless otherwise stated. No allowance has been made in the weights
of Steel Reinforcement for rolling margin or the weight of weld metal. Special care should be taken in removing corrosion of Steel
Reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution by using
brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and
applying polymer bond to the old Concrete surface before applying Polymer Mortar.
Contractor to quote on Metric Ton Rate of MS Steel which will be paid by actual weight derived based on Structural design and drawings
at the time of execution irrespective of MS Bar/Steel sizes.
02 15 00 PT Tendon Works
Supply and Installation of Encapsulated Monostrand unbonded Post Tensioning System for post tensioning elements of appropriate sizes
including all labor, machineries, tools and tackles, all consumables like anchor blocks, wedges, grouting, scaffolding etc., all lead and lift,
transportation etc. complete. The Rate shall include laying of Tendons, stressing of Tendons as per the drawing, design and instructions
of Engineer-in-charge. Rate to include costs of marking Tendon locations on slab after de-shuttering using 100mm wide enamel paint
band using masking tape for clear edges in the paint shade approved by the Architect, testing of Post tensioning material, strands and
providing test results certificates like material testing report of cable (having values of breaking load, 0.2 % proof load, % Elongation &
Modulus of Elasticity) for Cable for every 25 Ton, anchor blocks (having microstructure analysis, chemical composition and hardness 3,426 M2 ₹ 930 ₹ 31,86,031
values) and wedges (having chemical composition and hardness values) for 1 sample out of 500 units for anchor plates and wedges ,
storing and maintaining of samples etc. complete as per the instructions of Engineer-in-charge. Additionally, calibration certificates of jack
and pump set with image of force measured by the display of the load cell, as well as calibration certificate of pressure gauge attached to
pump set. These shall be submitted prior to corresponding activity. The work to be carried out shall be approved by the Structural
Engineer in writing before commencing concrete works.Contractor through its PT Agency at their own cost should submit the detailed PT
Slab Reinforcement design as per the relevant codes and shop drawings to the Structural Designer and the Architect prior to execution
and get the same approved by the Structural Designer.
02 16 00 Slab Lineout by Total Station Survey
Carrying out Slab Lineout of every floor and floor to floor Levels to be established using Total Station Survey at all corners of the Slab 5,026 M2 ₹ 20 ₹ 1,00,520
and using TBM at all levels to establish accurate profile of the slab and to be verified by the Architect.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 4
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
3 WATERPROOFING WORKS ₹ 43,48,205
03 01 01 The work shall include cost of materials, labor, curing, all lead and lifts at all levels, loading and unloading, transportation and all other
-
incidental charges etc., complete as directed by the Engineer-in-charge.
03 01 02 Additional Security Deposit amounting to 10% of the payable amount under the Waterproofing Section shall be hold back for a period of 5
years from the date of Virtual Completion of the building (No interest shall be paid on the hold amount) against defect / leakage / seepage -
/ dampness etc. defect if any shall be rectified without any additional cost.
03 01 03 All Waterproofing works shall be carried out by specialist Waterproofing agencies approved by the engineer-in-charge. -
03 01 04 10 years Waterproofing guarantee on Rs. 100 stamp paper in an approved format shall be issued by the Contractor. -
03 03 00 Brickbat Coba with Polymeric Cementitious Waterproofing, Horizontal Surfaces
Providing and laying integral Cement based water proofing treatment including preparation of surface as required for treatment of roofs,
balconies, terraces etc. consisting of following operations,
a) Applying a slurry coat of neat Cement using 2.75 kg/sqm of Cement admixed with water proofing compound conforming to IS. 2645
and approved by Engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface
before treatment.
b) Laying brickbats of the size (65mm to 120mm) with a gap of 15 and 20mm with Mortar using red bricks with 50% of Cement Mortar 1:5
(1 Cement : 5 coarse Sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20
mm thick layer of Cement Mortar of mix 1:5 (1 Cement :5 coarse Sand ) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls up to 300 mm height including rounding
of junctions of walls and slabs. The brickbats shall be wholly burnt and are well soaked overnight before laying. ₹ 8,57,056
c) After two days of proper curing applying a second coat of Cement slurry using 2.75 kg/ sqm of Cement admixed with water proofing
compound conforming to IS: 2645 and approved by Engineer-in-charge.
d) Finishing the surface with 20 mm thick jointless Cement Mortar of mix 1:4 (1 Cement :4 coarse Sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer
of Plaster and finally finishing the surface with trowel with neat Cement slurry and making pattern of 300x300 mm square 3 mm deep and
150mm Vata at the edge of the vertical surfaces.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the Engineer-in-Charge: With average thickness of 120 mm and
minimum, thickness at khurra.
03 03 01 Brickbat Coba with Polymeric Cementitious Waterproofing , Upto 150mm Thk 612 M2 ₹ 1,400 ₹ 8,57,056
03 04 00 Brickbat Coba with Crystalline Waterproofing and 20mm Exit Pipe, Toilets
Providing Brickbat Coba Waterproofing treatment through specialized agencies to the flooring of water closets, bathrooms, kitchen,
nahanies, washing places, sanitary blocks etc. using Brickbat Coba specification as per item 03 03 00, so as to make it consistent,
homogeneous and impervious against leakage, seepage etc. The sunk portion shall be covered with brickbat waterproof Coba of
required thickness with necessary gradient for easy flow of water. Finally, the floor shall be covered with jointless waterproof Cement
Plaster in 1:3 c.s. 12 mm to 15 mm thick finished rough for receiving Tiles. The average thickness of complete treatment shall not be less
than 100 mm. Special care should be taken at the corners of vertical and horizontal surfaces by creating a vata in Waterproofing
compound and Plaster. The soil pan area will not be deducted. (After completion of work leakage test shall be carried out after ₹ 1,33,898
impounding the water for 7 days without any extra cost. The actual treated area will be measured and paid for). A 20mm PVC Exit pipe
should be laid at the bottom surface to allow for drain of excess water.
Vertical Surfaces: Providing Cementitious Waterproofing treatment through specialized agencies to the dado portion of the
R.C.C./masonry side walls from floor area of water closets, bathrooms, kitchens, washing places, sanitary blocks etc. by Plastering with
waterproof Cement Plaster in 1:4 c.s. 12 mm to 15 mm thk. Finally, the walls shall be covered with jointless waterproof Plaster in 1:3 c.s.
12 to 15 mm thick finished rough for receiving Tiles. The average thickness of complete treatment shall not be less than 25 mm. (The
actual treated area will be measured and paid for)
03 04 01 Crystalline Waterproofing with Brickbat Coba Upto 150mm Thk 89 M2 ₹ 1,500 ₹ 1,33,898
03 05 00 Chemical Crystalline Waterproofing Works, Vertical Surfaces
Providing and applying Penetron or equivalent crystalline waterproof coating, as per manufacturers specifications, with preparation of
surfaces to Plastered surface in Basement retaining walls, Parking structures Concrete slabs (floor/roof/balcony, etc.), Construction joints
2,160 M2 ₹ 1,292 ₹ 27,90,034
Foundations, Water retaining structures, Swimming pools, Sewage and water treatment plants, coving at junctions with vertical faces,
giving satisfactory water tightness test of 14 days by filling water as per specifications, making good all faces as before and after
installation of sanitary fittings complete.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 5
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
03 10 00 Shahabad Waterproofing Works
Providing and laying integral Cement based Shahabad Waterproofing treatment for Waterproofing on,
A) Horizontal surfaces at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of : i)
Ist layer of 22 mm to 25 mm thick approved and specified Shahabad rough Stone slabs over a 25 mm thick base of Cement Mortar 1:3 (1
Cement : 3 coarse Sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling
course (leveling course to be paid separately). Joints sealed and grouted with Cement slurry mixed with water proofing compound. ii) 2nd
layer of 25 mm thick Cement Mortar 1:3 (1 Cement: 3 coarse Sand) mixed with water proofing compound in recommended proportions.
iii) Finishing top with Stone Aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. 424 M2 ₹ 1,338 ₹ 5,67,217
B) Vertical surfaces by fixing specified Stone slab 22 mm to 25 mm thick with Cement slurry mixed with water proofing compound
conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between Stone slabs and the receiving surfaces and
filling the gaps with neat Cement slurry mixed with water proofing compound and finishing the exterior of Stone slab with Cement Mortar
1:3 (1 Cement : 3 coarse Sand) 20 mm thick with neat Cement punning mixed with water proofing compound in recommended proportion
complete at all levels and as directed by Engineer-in-charge

4 MASONRY WORKS ₹ 19,18,984

04 01 01 Perni Inspection by Site Engineer in Charge and to be recorded in Log Book -
04 01 02 RCC items such as Stub Columns, Sills, Bands, Lintels etc. paid separately and not to be included in Masanory -
04 01 03 Masonry Thkness Above 230 to be Measured in Cubic Meter -
04 03 00 Autoclaved Aerated Concrete (AAC) Masonry Works
Providing Autoclaved Aerated Concrete Masonry of Ecolite or equivalent make conforming to IS 2185 (Part-3) 1984 in extra fine jointing
₹ 17,79,813
Mortar of fix block of Ultra Tech or equivalent including striking joints, raking out joints, providing necessary Rebarring with chemical
grout wherever required (Reinforcement and Concrete works will be paid under respective item) and scaffolding etc. complete.
04 03 03 AAC Masonry Wall, 200mm Thk 547 M2 ₹ 1,026 ₹ 5,61,591
04 03 04 AAC Masonry Wall, 150mm Thk 1,001 M2 ₹ 1,026 ₹ 10,26,913
04 03 05 AAC Masonry Wall, 125mm Thk 186 M2 ₹ 1,026 ₹ 1,91,309
04 04 00 Burnt Brick Masonry (BBM) Works
Providing & Constructing Brick work at all levels & floors including pillar in CM (using crush Sand)1:6 using burnt bricks well soaked in
water, in true line, level, Plumb, with all courses laid truly horizontal in English bond having fully filled 10-12mm Mortar joints, all vertical
joints shall be truly vertical (in alternate course) including raking of joints, necessary scaffolding, finishing, curing, etc. at all heights etc.
complete. In case of 110mm thk masonry, providing 150mm X 150mm RCC vertical pillar at every 3 m length and 100mm thick RCC ₹ 1,39,170
horizontal band at 1.5m height, necessary Rebarring with chemical grout wherever required (Reinforcement and Concrete items will be
paid separately as per scheduled Rates under respective item), striking out joints, scaffolding and curing etc. complete. The work shall
include cost of materials, labor, curing, all lead and lifts at all levels, loading and unloading, transportation, scaffolding and all other
incidental charges etc., complete and as directed by the Engineer-in-charge.
04 04 01 BBM Wall, 230mm Thk 16 M3 ₹ 7,994 ₹ 1,31,637
04 04 02 BBM Wall, 150mm Thk 7 M2 ₹ 1,119 ₹ 7,533
5 PLASTER WORKS ₹ 30,77,656
05 01 01 The work shall include cost of materials, labor, curing, all lead and lifts at all levels, loading and unloading, transportation, scaffolding and
-
all other incidental charges etc., complete and as directed by the Engineer-in-charge.
05 01 02 For External Plaster, the Plaster should always be started from Top/Highest point of the building façade working its way downward. True
line and length shall be achieved by first making 15mm thk Cement Plaster stay (Thiyya) of 50x50mm at every 4’ grid in in true line and
-
length and checking diagonals as per Architectural Elevation to avoid any waviness on Plaster to the satisfaction of Architect/Site
Engineer. Only upon approval of Thiyya, the Plaster work is to be commenced.
05 01 03 Scaffolding: The Scaffolding should be made of edge frame for all Plastering work at all heights and levels and should be included in the
-
cost.
05 01 04 Waterproofing compound: Waterproofing compound as per manufacturer’s specifications should be used in Plaster for all external/Toilet
-
walls water tanks etc. and should be included in the cost.
05 01 05 During rainy season, Contractor should take extra precautions at own cost, including covering the freshly Plastered second coat of
Plaster, to ensure that the topcoat is not washed away by rains thereby giving it a wavy/uneven appearance. Contractor shall repair any -
damage to the Concrete surface due to rains to the satisfaction of Architect.
05 01 06 3’x3’ Samples/mockups of Dabba Plaster with Corner Patti should be carried out to determine the size of Dana to the satisfaction of the
-
Architect before starting the work.
05 01 07 In case of conventional Plaster is replaced by the Ready-mix Plaster, the extra/difference for the same shall be paid to the Contractor. -

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 6
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
05 01 08 All external Plaster should be finished at the edges/corners of the openings/Façade by taking out a 25mm smooth corner dhar patti,
-
sample for which is to be approved by the Architect. The Rate for same is to be included in the Plaster works.
05 01 09 All the finished sizes of the openings shall be identical in size to install factory made unitized windows. The opening sizes can be finished
-
using MS Farma which will be paid for separately for.
05 09 00 Groove Works In Plaster, 20mm Thk
Taking out a 20mmX8mm groove in Plaster as per the Architectural drawings/Elevations on a Wet Plaster. Prior to carrying out the
groove, the lineout should be made on Wet Plaster as per the elevations and approved by ENGINEER-IN-CHARGE. The groove should 5,999 RM ₹ 49 ₹ 2,93,951
be made in second coat of Plaster while it is still Wet. The groove should be finished with a sharp corner/edge and with uniform depth
complete to the satisfaction of Architect. The Rate should include cost of labor, scaffolding, curing complete as per the specifications.
05 10 00 Aluminum "C" Channel Embedded Groove Works in Plaster
Preparing the surface, providing & creating a groove in external Plaster as per the Architectural Elevations by using/embedding Jindal C
Channel as specified in second coat of Plaster while it is still Wet. Before starting the second coat of external Plaster, the Channel is to
be screwed using star headed screws in true line and level, including creating four-way junctions using 8mm spacer as per Architectural
Elevations over the first coat of Plaster directly at all levels and floors to finish in true line as per drawing. The groove is to be created by ₹ 5,87,845
embedding completely the channel during the second coat of Plaster without filling the channel with Cement Mortar. The work shall
include cost of materials, labor, curing, cleaning inside of Aluminum channels, all lead and lifts at all levels, loading and unloading,
transportation, scaffolding and all other incidental charges etc., complete and as directed by the Engineer-in-charge. The item will be paid
for on a Running Meter Basis.
05 10 01 Aluminum "C" Channel (Jindal Code:15607, 0.137 Kg/RM), Supply Only 822 KG ₹ 314 ₹ 2,57,900
05 10 02 Groove in Plaster with Aluminum "C" Channel Fixing, Installation Only 5,999 RM ₹ 55 ₹ 3,29,945
05 11 00 Chicken Mesh, 300mm Wide
Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of
2,359 RM ₹ 57 ₹ 1,34,435
approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc.
complete.\
05 12 00 Internal Sand-Faced Smooth Plaster Works, 15mm Thk with Ready-Mix Plaster
Preparing the surface, Providing & applying of 15 mm Thk internal Cement Plaster at all levels & floors Reay-Mix plaster in true line,
level, Plumb and right angle as per drawing, surface cleaning and dampening, providing & fixing of chicken mesh 300mm wide at the
junctions of RCC & masonry structure with minimum 75mm overlaps and over electrical conduiting & wherever applicable, Plastering the 632 M2 ₹ 526 ₹ 3,32,626
mesh in CM 1:2 and also including finishing, rounding, dhar, cornice and & making grooves above skirting with all the necessary
scaffolding, curing, cleaning of floor from Mortar dropouts, Gypsum wastage material etc. complete. Chicken mesh and Waterproofing
compound to be paid separately., The Rate should include cost of materials, labor, scaffolding, curing complete as per specifications.
05 13 00 External Sand-Faced Smooth Plaster Works, 20mm Thk with Ready-Mix Plaster
Preparing the surface, providing & applying two coats of 20mm Thk external Sand faced smooth Cement Plaster Reay-Mix plaster at all
levels and positions by first making 15mm thk Cement Plaster stay (Thiyya) of 50x50mm at every 4’ grid in in true line and length using
Thiyya as per Architectural Elevation to avoid any waviness on Plaster to the satisfaction of Architect/Site Engineer. Only upon approval
of Thiyya, the Plaster work is to be commenced. The scope of work includes making Thiyya ’s, a single coat of 15mm thk in Cement
Mortar 1:4 using Waterproofing compound at 1kg/bag curing the same for not less than 2 days and keeping the surface of the coat rough
to receive the Sand faced treatment of 6 to 8 mm thk in C.M. (1:4) and finishing the surface by smoothing the surface with Wet sponge 1,610 M2 ₹ 935 ₹ 15,05,436
on second coat of Wet Cement finish surface, with jointless finish with all necessary edge-frame scaffolding, curing for 14 days, making
band, 50X25mm drip mold pani patti, dhar at horizontal edges/corners, grooves, curves, cornices including providing & fixing of 22 gauge
wire mesh at the junction of RCC & masonry structure with minimum 75mm overlaps etc., adding Waterproofing compound of approved
make and dosage as per the manufacturer's recommendation, curing etc., complete. Chicken mesh to be paid separately. The Rate
should include cost of materials, labor, scaffolding, curing complete as per specifications.
05 14 00 Backcoat Plaster Works, 8mm Thk with Ready-Mix Plaster
Providing backcoat rough Cement Plastering 8mm thick in single coat with Ready-Mix plaster, to brick masonry for base of Daddo of
589 M2 ₹ 379 ₹ 2,23,363
approved quality, providing and removing scaffolding, including cost of materials, labor, curing complete as per specifications. The Rate
should include cost of materials, labor, scaffolding, curing complete as per specifications.
6 SILL & JAMB WORKS ₹ 3,28,840
06 01 01 For Sill & Jamb works below 300mm, the quoted Rate should be inclusive of 1" overlap of Stone and measurement will be done on RM
-
basis
06 01 02 For Sill & Jamb works above 300mm, the quoted Rate should include the actual surface area of Stone used -
06 01 03 Rate should be inclusive of Holdfast and Adhesive and Edge polish to stone -

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 7
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
06 03 00 Granite Sill & Jamb Works
Providing and fixing 18-20mm thk polished natural Stone as specified below of approved quality, pattern and color for Sill and Jambs
including preparing the surface and levelling in the desired line, Cement Mortar 1:3 bedding or backing, Cement float, machine cutting,
₹ 3,28,840
leveling, jointing, smooth Cement Plastering along the sides to match the existing surface in Cement Mortar 1:3, filling the joints with neat
Cement or pigment mixed with Cement, finishing, curing etc. complete as directed by Engineer In Charge. In case of change in type of
natural Stone, the Contractor shall be paid extra, or amount recovered based on the basic Rate of Stone used.
06 03 01 Granite Stone Head Jamb (Upto 300mm), Steel Grey (Basic Rate : Refer to Annexure Sheet) 83 RM ₹ 551 ₹ 45,458
06 03 02 Granite Stone Jamb (Upto 300mm), Steel Grey (Basic Rate : Refer to Annexure Sheet) 55 RM ₹ 551 ₹ 30,305
06 03 03 Granite Stone Sill (Upto 300mm), Steel Grey (Basic Rate : Refer to Annexure Sheet) 66 RM ₹ 551 ₹ 36,366
06 03 04 Granite Stone Head Jamb (Above 300mm), Steel Grey (Basic Rate : Refer to Annexure Sheet) 55 M2 ₹ 1,791 ₹ 98,505
06 03 05 Granite Stone Jamb (Above 300mm), Steel Grey (Basic Rate : Refer to Annexure Sheet) 44 M2 ₹ 1,791 ₹ 78,804
06 03 06 Granite Stone Sill (Above 300mm), Steel Grey (Basic Rate : Refer to Annexure Sheet) 22 M2 ₹ 1,791 ₹ 39,402
7 FAÇADE WORKS ₹ 2,01,49,812
07 01 01 The work shall include the cost of all material, accessories, labor at all lead and lifts at all levels, loading and unloading, transportation
-
and all other incidental charges, standard accessories complete as per the instructions of Engineer in Charge.
07 01 02 Wherever Basic Rate is mentioned, the Client reserves the right to change the same or supply the material at his own cost. In such a
scenario, the cost of material based on quoted “Basic Rate” will be deducted from the Item and Contractor will be paid labor, and 15% -
Profit. Contractor should submit Rate Analysis for the same by deducting Basic Rate of the Material.
07 01 03 All fixing Accessories such as Screws, nuts, brackets etc. otherwise not mentioned should be included in the rate. -
07 01 04 Accessories Included, self taping screws etc -
07 01 05 Mockup Sampling -
07 01 06 Underframing for Cladding in MS/GI to be carried and paid separately -
07 08 00 Clinker Brick Veneer Wet Cladding
Providing and Fixing 10-12mm Thk. Brick Veneer Tiles of specified size and make of approved color & design including bands and
random patterns as per tiling layout Architectural elevation drawing in chemical adhesive such as Kerakoll H40 no limit / Laticrete 254 or
equivalent on any substrate, laid in true line, level, pattern and leaving specified joints of 10mm Thk. using spacer for pointing/Grouting in
Color Cement Grout, wastage, curing, cleaning, chemical coating of Mapei AntiPluviol or equivalent, Scaffolding washing etc., complete.
The Tiles are to be laid using Acrylic Stencil/template of 10mm Thk. or as directed by Architect. The Contractor should ensure that Tiles
are not stained by chemical or grout material during application and should take adequate measures to protect the surface of the Tile ₹ 2,981 ₹ 8,21,549
from Staining. All the tiling work should be quoted with Anti Staining chemical, Mapei AntiPluviol or equivalent as approved by the
Architect and to be applied by a roller brush. The “Cladding work” shall include cost of all materials, preparing Formwork, chemical
coating material, pointing, labor, chasing of wall to flush the dado in line with the wall, L-groove at corner, all lead and lifts at all levels,
loading and unloading, transportation, Scaffolding and all other incidental charges etc., complete and as directed by the Engineer-in-
charge. In case the Brick Tile is supplied by the client, the cost of the Tile will be deducted from the Rate however the labor and profits
for the same shall be paid to the Contractor based on the Basic rate in Table below.
07 02 09 Clinker Brick Veneer/Wall Ceramic Tiles, 10mm Thk ( Basic Rate : Refer to Annexure Sheet) 276 M2 ₹ 900 ₹ 2,48,035
07 02 08 Polymer Thinset Adhesive, Avg 5mm thk, Laticrete 254 or Equivalent (Approx. Coverage: 50 SF/20Kg) 276 KG ₹ 111 ₹ 30,646
07 02 10 Water Repellent Hydrophobic Coating, Hydracrete/ Roff C04 or Equivalent (Basic Rate : Refer to Annexure Sheet), 4 Coats 276 M2 ₹ 45 ₹ 12,402
13 02 31 Cement Grout with 10mm Spacer 276 KG ₹ 800 ₹ 2,20,475
Add Wastage on Material in Percentage % 5% ₹ 25,578
Add Transportation on Material in Percentage % 3% ₹ 16,114
Add Installation/Labour/Scaffolding Rates in SM % 30% ₹ 1,61,141
Add Profits to be quoted on Material and Labor Cost in Percentage % 15% ₹ 1,07,159
07 11 00 Stone Dry Cladding
Providing and fixing Dry Cladding any shape at all levels with 25-30 mm Thk. gang saw cut natural Stone as specified with machine cut
edges of uniform color and size upto 1mx1m, fixed to structural Steel/Aluminum framework and/ or with the help of Hilti or equivalent SS
clamps etc. as per manufacturers recommendation and sealing the joints with approved weather sealant as per Architectural drawing and
₹ 1,93,28,263
direction of Engineer-in-charge. (The Steel/Aluminum framework shall be paid for separately). The Contractor will be paid based on the
percentage markup which includes wastage, transportation, Labor, scaffolding and profits on material cost as per the table below. The
Stone should be finished externally with two coats of water repellent hydrophobic coating such as Mapei AntiPluviol or equivalent using
roller brush. The GI/MS underframing is to be paid separately and is not to be included in the above scope of this work.
13 02 14 Mint Limestone with Installation (Basic Rate : Refer to Annexure Sheet) 1,686 M2 ₹ 6,500 ₹ 1,09,56,017
07 02 10 Water Repellent Hydrophobic Coating, Hydracrete/ Roff C04 or Equivalent (Basic Rate : Refer to Annexure Sheet), 4 Coats 1,686 Litre ₹ 45 ₹ 75,849
05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 8
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
07 02 13 SS Clamp for Stone Cladding, Hilti or Equivalent (Basic Rate : Refer to Annexure Sheet) 25,000 EACH ₹ 150 ₹ 37,50,000
Add Wastage on Material in Percentage % 5% ₹ 7,39,093
Add Transportation on Material in Percentage % 3% ₹ 4,43,456
Add Installation/Labour/Scaffolding Rates in SM 1,686 M2 ₹ 500 ₹ 8,42,771
Add Profits to be quoted on Material and Labor Cost in Percentage % 15% ₹ 25,21,078
8 WINDOW WORKS ₹ 7,05,012
08 01 01 The work shall include cost of all material, accessories, labor for fixing Windows in any surface including masonry or Curtain Glazing
sections, at all lead and lifts at all levels, loading and unloading, transportation and all other incidental charges, standard accessories and
EPDM Gasket, sealing with silicon sealant of color approved by the Architect to ensure watertightness complete as per design, details
-
and specification given in the drawing and approved by the Architect, including all hardware and consumables, sealing of joints between
Window and Window Sill/Plaster/Curtain Glazing sections with Clear Weather Silicone Sealant of approved make, etc. complete as per
the instructions of Engineer in Charge.
08 01 02 If there is change in Aluminium sections/ Upvc Extrusions/ Window Series/ Upvc shade/ Glass treatment or requirement for double Glass
unit or Mosquito-net etc. Only “Difference Amount” for weight of Aluminum/ Upvc/ change in Glass / Surface treatment as per the receipts
-
+ 15% will be Paid/ Recovered from the Quoted Rate of respective item. The Contractor should furnish an accurate Rate Analysis for
such item/ change & it shall “not” be treated as a “non-tendered item”.
08 01 03 Contractors should prepare a sample as per the specifications of each Window type for Architects approval before proceeding with
manufacturing. The contractor should make available samples of powder coating shade and textures/finishes, Glass samples for -
approval to the Architect prior to placing the order.
08 01 04 Any damage caused to Powder Coated Surface or uPVC sections while fixing/ before handover shall be made good or replaced by the
-
Contractor at his own cost and shall restore such surface to its original conditions.
08 01 05 All uPVC White Profiles should carry a warranty of 10 years. EPDM Gaskets should carry a warranty of 5 years. The hardware carries a
-
warranty of 1 year. Handles Powder Coated Material Friction stays SS grade 304. Nylon Rollers for sliding Windows.
08 01 06 The Rate is applicable for work at all levels, inclusive of materials, labor, loading/unloading/storage of material, fixing with anchor
fastener, scaffolding etc., complete all as per approved shop drawings, relevant IS Code, work methods and as per the instructions of
-
Engineer in Charge. Hindalco sections are to be used and refer drawing for quoting, an equivalent can be permitted with the approval of
Architect.
08 01 07 There may be a lead time for certain Extrusions/sections which might not be readily available in the market. The Contractor should do the
due market diligence, factor in the lead time, liaise with the Architect well in advance to get all the necessary details to place the order
-
ahead of time to cover the lead time and avoid any delays during the execution. Any delays on account of lead time for procurement and
its responsibility solely rests with the Contractor.
08 04 00 Aluminum Sliding Windows , Powder Coated- Jindal 27mm Series (Premium), 5mm Thk Glass
Providing and Supply, Fabrication and Fixing of extruded 65-micron Thk. pure polyester powder coated ( as per I.S. 1868/1982)
Aluminum Window with Saint Gobain or Equivalent 5 mm Thk. Toughened Glass with 27mm Jindal Series with Extrusions at all levels
₹ 97,020
and floors in any substrate including in Curtain Glazing sections with 2/3/4 Track sections and having 5 mm Thk. Glass with approved
quality EPDM Gasket, SS Screw, Rollers, Locks and Handles wherever necessary etc. complete. The extruded sections used shall be as
follows,
08 04 01 Jindal 27mm Series, 2 Track Top, Bottom, Side Code- 21402, Wt.- 0.993 Kg/Rm 0 KG ₹ - -
08 04 02 Jindal 27mm Series, 3 Track Top, Bottom, Side Code- 21401, Wt.- 1.591 Kg/Rm 0 KG ₹ - -
08 04 04 Jindal 27mm Series, Shutter Code- 21481, Wt.- 1.02 Kg/Rm 0 KG ₹ - -
08 04 05 Jindal 27mm Series, Shutter Interlock Code- 19442, Wt.- 0.328 Kg/Rm 0 KG ₹ - -
08 02 01 Clear Glass, 5mm Thk 0 M2 ₹ - -
08 04 07 27mm Series, 2 Track Sliding Window (Refer to Window Drawing & Window Rate Analysis Sheet for Calculations) 17 M2 ₹ 5,600 ₹ 97,020
08 05 00 Aluminum Casement Windows, Powder Coated- 40mm Series, 5mm Thk Glass
Providing & fixing in position 40mm Series Casement Windows of Jindal or equivalent with Extrusions, 65-micron Thk. pure polyester
powder coated ( as per I.S. 1868/1982) powder coated Aluminum Window with Saint Gobain or Equivalent 5 mm Thk. Toughened Glass
with section in Extrusions at all levels and floors in any substrate including in Curtain Glazing sections including hardware SS-304, friction ₹ 4,45,738
hinges, handle-cum-lock, as per detailed drawing and as directed by Engineer-in-charge with all necessary Aluminum Sections 40mm
Series, including 5 mm Thk. Glass with all required SS Screws and nuts, hardware etc. complete. The extruded sections used shall be as
follows,
08 05 05 40MM Casement with Fixed Panel- (Refer to Window Drawing & Window Rate Analysis Sheet for Calculations) 80 M2 ₹ 5,600 ₹ 4,45,738

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 9
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
08 06 00 Aluminum Adjustable Ventilator, Powder Coated
Providing and fixing in position Aluminum louvered Window with anodized Aluminum frame of approved make and of size 40mm x 20mm
x 2.0mm (wt. 0.605 kg/Rm) including adjustable Aluminum frame, 5mm Thk. frosted Glass, fixtures and fastenings etc. at all levels and ₹ 1,62,254
floors in any substrate including in Curtain Glazing sections, complete as directed by Engineer in Charge. The extruded sections used
shall be as follows.
08 06 03 Aluminum Louvred Ventilator (Type 1) 29 M2 ₹ 5,600 ₹ 1,62,254
9 GLAZING WORKS ₹ 88,75,953
09 01 01 Cost Inclusions: The Scope and Rate shall include cost of all Materials specified under the scope unless otherwise included elsewhere,
Labor, all SS 316 Grade Hardware such as Screws/ Bolts, Hilti Anchor Fasteners, GI/MS Brackets, Gaskets, Backer Rod, all required
Sealants (Structural & Weather), Dash Fasteners, etc., at all lead and lifts at all levels, Loading/Unloading and Transportation, -
necessary Scaffolding and all other incidental charges etc., complete as per drawings & technical specifications and as directed by the
Engineer-in-Charge/Architect. The cost of all of the above is deemed to be included in the respective items.
09 01 02 Change of Specifications: If there is change in Aluminum Extrusions, Glass type or treatment such as Toughening, Surface Finish /
Texture of Extrusions or requirement for Double Glass Unit, only the difference Amount as per the Actual Receipts for changed item +
-
15% overheads/profits will be paid/recovered from the quoted Rate of the respective item. Labor, Transportation, wastage etc. will remain
unchanged.
09 01 03 Survey: Contractor shall carry out detailed site survey to understand the profile available for fixing of Curtain Glazing. If required to suit
site condition, Contractor shall do all necessary changes / modifications in design & shop drawings as per the corrections / modifications -
and shall take approval for the same from Architect before proceeding for work.
09 01 04 Samples: Prior to start of work, Contractor shall submit samples as specified by the Architect of each item such as Powder Coated
Extrusions in requested RAL Shades, Glass Shades, Extruded Sections, Spider Fittings, Shade of Silicon, ACP/Flashing Samples, -
Fittings and Fixtures etc. to the Architect.
09 01 05 Shop Drgs/Certificates/Calculations: The Contractor shall submit the Wind Load Calculations, Structural/Powder Coating Certificates,
-
and submit all the Shop Drawings to the complete satisfaction of the Architect before execution.
09 01 06 Mockups: The Contractor shall prepare a Mockup of Curtain/ Structural Glazing or any item under the Scope free of Cost at locations
identified by Engineer-in-Charge prior to commencement of installation of Curtain Glazing to the satisfaction of Architect. Any -
suggestions/approval based on the Mock-ups by the Architect are to be incorporated in the final execution.
09 01 07 Powder coating: Certificate of specified Thk. shall be submitted. If there is a change in specification of Powder Coating, only the
difference Amount as per the Actual Receipts for changed specification + 15% overheads/profits will be paid/recovered from the quoted -
Rate of the respective item. Labor, transportation, wastage etc. will remain unchanged.
09 01 08 Extrusions: For non-standard or specially designed Extrusions, Contractor should procure the same by preparing necessary die’s from
the manufacturer. The cost for the same shall be reimbursed by the client against the receipts+15% Profit/Overhead on the receipt. The
Contractor should factor in the lead time required for this process as well as procuring the extruded material without causing the delays -
and liase for the same with the Architect on his own initiative. The mode of measurement for the Extrusions shall be based on the
weight/RM as derived/certified by the manufacturer and shall be paid based on the prevailing Aluminum Rates.
09 01 09 All MS structure in the system shall be coated with anticorrosive Primer. -
09 01 10 The designed facade system should be able to withstand all performance requirements as mentioned in the specifications not limited to
thermal stresses, seismic forces, wind velocity, rain, atmospheric variations with adequate factor of safety to meet relevant IS code -
provisions.
09 01 11 Providing Weather Silicone, non-staining silicone for Stone/GRC Cladding and Fire stop silicone sealant from approved make and brand
-
as per approved make list- Shade of silicone is as per Architects intent from approved make.
09 01 12 Mode of Measurement for façade elements shall be Running Meter or Square meter for each item as quoted. The RA bill is to be
calculated/measured based on Architects elevation drawings/shop drawings. The Contractor is free to verify the same physically on site -
and point out any discrepancy in measurements derived.
09 01 13 All flashings, soffits and top copings of ACP/Stone/Aluminum sheet/Any metal panel along with its necessary underframe, in closing the
-
Glazing, shall not be paid extra as they are considered to be part of the system.
09 01 14 As regards damage to Glass, Aluminum sheet, mild Steel framing members, hardware before completion and handover of the building
-
shall be replaced by the Contractor at no extra cost.
09 01 15 Contractor to co-ordinate with Chief Engineer and Chief Mechanical Engineer and ensure perimeter sealing of MEP services penetrating
-
through façade work.
09 01 16 The water test using fire hose at recommended pressure by the Glass manufacturer should be done at critical locations and shall be
identified by the ENGINEER-IN-CHARGE post execution of work. Any leakages post completion for a period of one year shall be -
repaired by the Contractor at their own cost under the defective warranty period.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 10
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
09 03 00 Curtain Glazing Works
Providing and fixing powder coated Aluminum Curtain Glazing system with a combination of clear/ film coated Saint Gobain or equivalent
clear Glass of specified thickness on Aluminum framework with capping using specially designed powder coated vertical mullion &
horizontal transoms of required size & as per Architect's approved grid work with Aluminum rectangular sections to be fixed in masonry at
interval of each floor on Concrete slab with 100 mm x 100 mm x 6mm Thk. galvanized bracket/angle, as per Architects drawing, fixed on
wall/slab/beam/column with raw anchor fastener bolt size of 10 mm x 90 mm with necessary jointing bolts & washers / nuts in the Plumb
for the line levels. The Glass panel’s shall be fixed on a specially designed Architectural sub- frame using EPDM Gasket and covered
with pressure plate and capping or Dow Corning 995 structural sealant & GE Silicon (SSG – 4000) in a manner that no Aluminum frame ₹ 9,784 ₹ 63,18,428
is visible from outside & grooves between the Glass panel shall be filled with weather sealant of Dow corning 789 / GE Sil proof to made
it air tight, water proof & dust free thus giving it a flush look outside, if applicable. Glass will be 6 mm Thk. of specified type Glaverbel
reflective type with heat strengthened and toughened.
The Rate shall be inclusive of Aluminum Extruded Profiles, Glass, EPDM Gasket, Accessories, Epoxy-Polyester hybrid powder coating of
65 micron in approved RAL Shade and finish/texture on all Extrusions with Certificate, ACP Flashing/Sills of Approved Shade, Gaskets,
fabrication and installation, frame fixing in position by Fischer Screw mechanism, sealants, scaffolding etc., complete with Design, supply,
fabrication & erection of approved structural Glazing using the following.
09 03 01 Mullions (22702 - 57 x 101.6 mm , Wt. - 2.66KG/RM) 4,896 KG ₹ 250 ₹ 12,23,940
09 03 02 Transoms (22702 - 57 x 101.6 mm, Wt. - 2.66KG/RM) 1,786 KG ₹ 250 ₹ 4,46,468
09 03 03 Pressure Plate (22709 - 58.35 x 11.8 mm, Wt. -0.536KG/RM) 1,344 KG ₹ 250 ₹ 3,36,088
09 03 04 Capping (22707 - 20 x 61.5 mm, Wt. - 0.395KG/RM) 991 KG ₹ 250 ₹ 2,47,677
09 03 05 Aluminum Tube to Seal Glazing Internally (14194 - 100 x 25 X 2 MM, Wt. - 1.307KG/RM 191 KG ₹ 250 ₹ 47,644
09 02 01 Toughened Glass, Clear or Tinted, 6mm Thk 646 M2 ₹ 1,292 ₹ 8,34,131
09 02 02 EPDM Gasket 1,298 RM ₹ 200 ₹ 2,59,613
09 02 03 Silicon Sealant of Approved Color 2,596 RM ₹ 50 ₹ 1,29,807
09 02 04 GI Brackets with Bolts and other Accessories as Per Structural Design (Basic Rate : Refer to Annexure Sheet) 613 EACH ₹ 190 ₹ 1,16,391
09 02 05 ACP Flashing/Sills, 1.2mm Thick of Approved shade 32 M2 ₹ 2,500 ₹ 80,722
09 02 07 Sun Control Film- Garware/LG or Equivalent, 2 Mil Thk as per Architects Selection 194 M2 ₹ 800 ₹ 1,54,986
09 02 08 Laquered PU Opaque Back Paint for Glass 129 M2 ₹ 1,500 ₹ 1,93,733
09 02 09 SS Bolt with Washer 2,450 EACH ₹ 25 ₹ 61,258
10 02 34 Powder Coating, 60 Micron Thk 5,016 RM ₹ 50 ₹ 2,50,812
Add Wastage in Percentage % 5% ₹ 2,19,164
Add Transportation % 3% ₹ 1,38,073
Add Labor % ₹ 500 ₹ 2,93,535
Add Scaffolding % 10% ₹ 4,60,243
Add Overheads & Profits % 15% ₹ 8,24,143
09 04 00 Top/Side Hung Windows in Curtain Glazing with 6mm Toughened Glass ₹ 8,38,200
09 04 01 Top Hung Windows (Hinges & Hardware) 559 EACH ₹ 1,500 ₹ 8,38,200
09 07 00 Double Swing Glass Door Works
Providing & fixing Double Swing doors of 12mm Thk. clear Tempered Glass Panels with all hardware like Ozone S Series or Equivalent
Top patch, Hydraulic bottom patch, lock, 32mm X 600 mm D/H Type Handles and all necessary hardware and accessories into any ₹ 23,173
substrate including Curtain Glazing. All SS items shall be made of SS 316 grade.Rate Quoted to be inclusive of 12mm Thk. clear
tempered Glass. Note: Only the size of the panel will be measured and paid.
09 07 01 Top Patch with Pivot- SS 316 Grade 1 EACH ₹ 1,500 ₹ 1,500
09 07 02 Heavy Duty Hydraulic Bottom Patch with Cover- SS 316 Grade 1 EACH ₹ 2,500 ₹ 2,500
09 07 03 High Security Bottom/Center Patch Lock- SS 316 Grade 1 EACH ₹ 2,000 ₹ 2,000
09 07 04 “H” Pull Handle, SS 316 Grade- 600 MM High 1 EACH ₹ 1,500 ₹ 1,500
09 07 05 Hydraulic “Wall to Glass” Door Hinges- SS 316 Grade(Optional) 1 EACH ₹ 2,500 ₹ 2,500
09 02 07 Sun Control Film- Garware/LG or Equivalent, 2 Mil Thk as per Architects Selection 4 M2 ₹ 800 ₹ 3,326
09 02 06 Clear Toughened Glass, 12mm Thk 4 M2 ₹ 2,368 ₹ 9,846

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 11
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
09 09 00 Aluminum Bullnose Works
Design, supply and install of Jindal/Hindalco or Equivalent Aluminum Bullnose of specified size, made up of Aluminum Extruded Profiles
in Epoxy-Polyester hybrid powder coating of 65 micron in approved RAL Shade and finish/texture on all Extrusions, over Powder-coated
₹ 12,81,541
Aluminum Framework/ GI Brackets using SS 304L grade Screws/ Anchor Bolts and Fasteners over Curtain Glazing/ building Façade/ MS
Frame or RCC/Masonry Wall.

09 09 01 Bullnose Extrusions, 150mm Wide 3,662 KG ₹ 350 ₹ 12,81,541

09 10 00 Aluminum Louvres/Sunscreen Works with Frame & Brackets
Providing and Fixing Louvres of approved color complete.(work to be got done by specialized agency approved by the Architect).
Design, supply and install of Jindal/Hindalco or Equivalent Aluminum Louvers/Sunscreen of specified size, made up of Aluminum
₹ 4,14,610
Extruded Profiles in Epoxy-Polyester hybrid powder coating of 65 micron in approved RAL Shade and finish/texture on all Extrusions,
over Powder-coated Aluminum Framework/ GI Brackets using SS 304L grade Screws/ Anchor Bolts and Fasteners over Curtain Glazing/
building Façade/ MS Frame or RCC/Masonry Wall.
09 10 05 Powder Coated Aluminum Tubes for Frame (Refer to Window Drawing & Window Rate Analysis Sheet for Calculations) 1,185 RM ₹ 350 ₹ 4,14,610
10 FABRICATION WORKS ₹ 46,69,573
10 01 01 Providing, transporting, cutting, fabricating, welding, hoisting and erecting in position welded “ALL MS Fabrication” items as identified
below using various/any items such as Plates/IS Sections/ Angles/Tubes/GI Roofing Sheets of specified RAL Shade with approved
Insulation/ Mesh/ SS Wire Ropes/GI Flashing/Louvres/Deck sheets/GI Downtakes etc. (but not limited to these) as specified below ,
using grade Fe 250 as per specifications and wherever necessary as determined by the Architect, submit Fabrication Shop Drawings for
the approval, erecting fabricated items for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, -
washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening,
bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for
painting with wire brush cleaning, filling joints with Carpage and applying one coat of red oxide zinc phosphate primer of 30 microns each.
All the rates shall be EXCUSIVE of Enamel Paints and same shall be paid separately under Painting Item.
10 01 02 All Fabrication Work identified under “Fabrication” shall include cost of material, labor, any fixing hardware such as baseplates, stiffeners,
hex/anchor bolts or any accessories required at all lead and lifts at all levels, loading and unloading, transportation, scaffolding, and all
other incidental charges etc., complete and as directed by the Engineer-in-charge. All the rates shall be EXCUSIVE of Enamel Paints and
same shall be paid separately under Painting Item. The unit of measurement for all fabrication shall be on the basis of its weight -
expressed in Kg/MT derived from the quoted Basic Rate. All the MS Tubes/Pipes used shall of rust free, of uniform finish of Apollo or
equivalent make to the satisfaction of the Architect. The Contractor should factor in lead time required to procure some “special items”
and plan the schedule/ drawing requests accordingly. Any procurement delays will not be counted for.
10 01 03 The owner/Architect reserves the right to change/ replace the combination of any of the Fabrication elements. In such case, and for all
the physical measurements, the unit if measurements as specified in BOQ sheet shall be considered. If there is change in MS sections,
only the “Difference Amount” for weight of Steel sections as per the receipts + 15% shall be Paid/ Recovered from the Quoted Rate of -
respective item. The Contractor should furnish an accurate Rate Analysis for such item/ change & it shall “not” be treated as a “non-
tendered item”. The labor, transportation and wastage shall remain the same.
10 01 04 The welding carried out shall confirm to IS standards and should be carried out as a continuous butt joint of uniform thickness across.
The Spot Welding should be avoided and is to be used only for initial tacking purpose. All the welding shall be finished uniform by -
grinding and removing excess weld, any bur or residues from the metal surface to the satisfaction of Architect.
10 01 05 Wherever CNC/Laser cutting for MS Plates/Structural Elements or Hot Dip Galvanized Iron Treatment is required, the Contractor shall
submit the rates of cutting/ GI treatment inclusive of transportation for the approval of the Architect. Upon approval, the Contractor shall -
be paid as per the receipts + 15% Profit/Overheads.
10 01 06 For Multi-Wall Polycarbonate Sheet Roofing Works: Providing and fixing 12 mm Thk. multiwall Lexan or equivalent Polycarbonate Sheet
Roofing of approved make with 150 mm end laps, including 6 mm dia. self-tapping Screws, with PVC coated G.I. plain and special
-
neoprene washers, 6 mm dia. seam bolts @ 600 mm for side lap, as per drawing, etc., complete on MS Fabricated frame as specified
below.
10 01 07 For Laminated Glass Roofing Works: Providing and fixing 12 mm Thk. Toughened Glass using Silicon Sealant of approved make over
-
MS Fabricated frame as specified below, complete.
10 01 08 For Shingle Roofing: Providing and fixing Asphalt Fiberglass Shingles of min 5mm Thk. of approved make using Manufacturer
-
recommended Adhesive over 15mm Thk. Oriented Strand Board (OSB). on MS Fabricated frame as specified Complete.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 12
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
10 01 09 Providing and fixing SS Railing (304 grade) as specified for staircase steps at all levels and floors with 40 mm dia. vertical posts at 900
mm c/c with 75 mm dia. SS plate at bottom, having SS handrail of 50 mm dia. with 12 mm Thk. SS rod at a distance of 200 mm C/C
-
The work shall include cost of materials, labor, Screws, anchor fasteners, at all lead and lifts at all levels, loading and unloading,
transportation, scaffolding and all other incidental charges etc., complete and as directed by the Engineer-in-charge.
10 01 10 Providing and fixing SS Railing for staircase steps (304 grade) at all levels and floors with 40 mm dia. vertical posts at 900 mm c/c with
75 mm dia. SS plate at bottom, having SS handrail of 50 mm dia. with 12 mm Thk. SS twisted wire ropes with turnbuckle arrangement at
a distance of 200 mm C/C The work shall include cost of materials, labor, Screws, anchor fasteners, at all lead and lifts at all levels, -
loading and unloading, transportation, scaffolding and all other incidental charges etc., complete and as directed by the Engineer-in-
charge.
10 01 11 Providing and fixing SS 304 grade Stainless Steel railing with 40 mm diameter and 1.5 mm Thk. at top, 40 mm diameter and 1.5 mm Thk.
vertical supports spaced at 1.5 m center to center, and 8 mm Thk. Toughened Glass fixed with studs to rail including fabricating, fixtures, -
erecting, necessary welding, grinding, finishing, buffing to stainless Steel pipe etc. complete.
10 01 12 Providing and fixing SS Handrail (304 grade) 40 mm diameter and 1.5 mm Thk. with SS L supports made up of 15mm diameter and
1.5mm Thk. pipe fixed to wall with ss baseplate of 50 mm diameter and 1.5mm Thk. spaced at 1.5 m center to center with anchor Screws
-
to wall and welded to rail including fabricating, fixtures, erecting, necessary welding, grinding, finishing, buffing to stainless Steel pipe etc.
complete.
10 03 00 MS Entrance Canopy ₹ 57,288
10 02 02 ISMC “C” Section, 150X75X9mm Thk (Wt-16.40 Kg/RM) 496 KG ₹ 99 ₹ 48,997
10 02 27 MS Circular Hollow Section (CHS), 76.1mm ⌀, 4mm Thk (Wt-7.11 Kg/RM, SA- XX SM/M) 39 KG ₹ 119 ₹ 4,671
10 02 38 MS Plate, 8mm Thk (Wt-64 Kg/M2) 37 KG ₹ 99 ₹ 3,619
10 04 00 MS Exit Canopy ₹ 3,619
10 02 38 MS Plate, 8mm Thk (Wt-64 Kg/M2) 37 KG ₹ 99 ₹ 3,619
10 06 00 MS Staircase ₹ 24,67,528
10 02 22 MS Rectangular Hollow Section (RHS), 240X120X5mm Thk (Wt-26.97 Kg/RM, SA- 0.694 SM/M) 977 KG ₹ 119 ₹ 1,15,802
10 02 39 MS Plate, 10mm Thk (Wt-80 Kg/M2) 23,786 KG ₹ 99 ₹ 23,51,726
10 09 00 MS Bullnose/Louvres ₹ 3,20,733
10 02 38 MS Plate, 8mm Thk (Wt-64 Kg/M2) 3,244 KG ₹ 99 ₹ 3,20,733
10 23 00 MS Structural Fabrication ₹ 3,70,856
10 02 13 MS Square Hollow Section (SHS), 50X3mm Thk (Wt-4.25 Kg/RM, SA- SM/M) 3,130 KG ₹ 119 ₹ 3,70,856
10 25 00 MS Rolling Shutter ₹ 53,064
10 25 01 MS Rolling (Type 1) 8 M2 ₹ 6,700 ₹ 53,064
10 35 00 MS Horizontal Rail, 900mm Ht ₹ 2,27,526
10 02 26 MS Circular Hollow Section (CHS), 48.3mm ⌀, 2.9mm Thk (Wt-3.25 Kg/RM) 1,041 KG ₹ 119 ₹ 1,23,365
10 02 25 MS Circular Hollow Section (CHS), 33.7mm ⌀, 2.6mm Thk (Wt-1.99 Kg/RM) 12 KG ₹ 119 ₹ 1,373
10 02 24 MS Circular Hollow Section (CHS), 21.3mm ⌀, 2.3mm Thk (Wt-1.08Kg/RM) 867 KG ₹ 119 ₹ 1,02,788
10 37 00 Anchor Fastner Bolts ₹ 11,68,960
10 37 01 Anchor Fastner Bolt, M8X75mm (Basic Rate : Refer to Annexure Sheet) 25,000 EACH ₹ 40 ₹ 10,00,000
10 37 02 Anchor Fastner Bolt, M10X100mm (Basic Rate : Refer to Annexure Sheet) 3,072 EACH ₹ 55 ₹ 1,68,960
11 GYPSUM WORKS ₹ 29,31,756
11 01 01 The work shall include cost of materials, labor, curing, cleaning inside of Aluminum channels, creating 6mm grooves in skirting/wherever
specifies, all lead and lifts at all levels, loading and unloading, transportation, scaffolding and all other incidental charges etc., complete -
and as directed by the Engineer-in-charge.
11 01 02 In case it is observed during Punning Work that line and length of Beam/Masonry/Columns exceeds the acceptable limit of 5mm as a
result of which the Punning Thk. will exceed the specified Thk., the Civil Contractor at own cost shall rectify such uneven surface by -
applying Cement Plaster/ Chemical Treatment etc. in order to maintain consistent Gypsum Thk. of 15mm.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 13
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
11 03 00 Gypsum Wall Punning Works, 12mm Thk
Preparing the surface, providing & applying of 12-15 mm Thk. “Gulf brand” Gypsum punning finishes directly on RCC slab ceiling/AAC
Internal Walls/internal Plaster at all levels and floors in true line and level with Thk. as required to Concrete members viz.slab soffit,
beams etc. making curves, dhar, cornices including providing & fixing of plastic/fiber mesh at the junction of RCC & masonry structure
with minimize. slab overlaps to finish in true line and level. For Thk.es greater than 15mm Contractor shall finish the surface in two
Coates with sufficient time in between to allow the first coat of Gypsum to Dry adequately. Wherever directed by ENGINEER-IN-
CHARGE or the Architect, special care should be taken to avoid staining of Gypsum on the form finished exposed slab, beam or any 5,568 M2 ₹ 450 ₹ 25,05,561
RCC elements which is not to be finished in Gypsum by covering the RCC surfaces with Painters Abro Tape during Gypsum application.
In case of staining, Contractor should clean the RCC surface to original finish at his own cost. The Rate to include for all the material,
necessary scaffolding, hacking, roughening/notch trowelling RCC surface using chemical coating for bonding between RCC and
Gypsum, closing and finishing the chiseled surface by electrical/services Contractor, cleaning of the floor after work completion etc.
complete.
11 04 00 Aluminum Channel Groove Works in Punning, 8 mm
Preparing the surface, providing & creating specified Groove in Plaster as per the Architectural Wall Elevations by using Jindal C
Channel as specified. The Channel is to be embedded in true line and level as per Architectural Elevations in 12mm Gypsum punning
directly, including creating four-way junctions in channel using an 8 mm spacer, at all levels and floors to finish in true line as per drawing.
₹ 4,26,195
The groove is to be created in punning with line and length, using a Bosch or equivalent groove cutting machine to create a groove in
punning first which is to be followed by embedding the Aluminum channel to be flushed with Punning surface followed by finishing of the
groove with POP on outer edges of the channel. Screws are to be used to secure the C channel in place if required. The Rate shall
include all the materials, labor, scaffolding and finishing the surface, cleaning of the floor after work completion etc. complete.
11 02 01 Channel (Jindal Code :15635, Wt. 0.037 Kg/Rm) 3,157 RM ₹ 135 ₹ 4,26,195
12 CEILING WORKS ₹ 55,79,729
12 01 01 The work shall include cost of materials including framing, labor, creating grooves in gypsum sheet, coving, cutting holes for any fixtures,
making trap doors as required, all Philips head screws, hardware or any fixing accessories, all lead and lifts at all levels, loading and -
unloading, transportation, scaffolding and all other incidental charges etc., complete and as directed by the Engineer-in-charge.
12 01 02 The Contractor shall establish “Reference Ceiling Level” (that is Top of Edge Trim/Ceiling Suspension) by measuring the ceiling height
from Slab Bottom/FFL as per the drawing for the entire floor with the help of all other services vendors like light fixtures, Air condition
grilles, sprinklers, speakers etc., using a Plumb mark as a reference point by placing line laser leveler on it. Then with the help of laser -
point, the Contractor should mark bottom of wall angle level on the entire floor in red chalk for the Approval of Architect. Contractor
should bring to the attention of Architect any anomalies observed and should proceed only upon getting the approval from the Architect.
12 01 03 The Contractor shall take extreme precautions to protect Mineral Fiber Tiles from staining by using gloves etc. Any
-
stained/bent/damaged tiles will have to be replaced at their own cost before handing over the building.
12 01 04 If there is change in Ceiling tiles, edge profile of Tiles/Grid, Laminate or any finishing items, only the difference Amount as per the Actual
Receipts for changed item + 15% will be paid/recovered from the quoted Basic Rate of the respective item. The Contractor shall submit a -
Rate Analysis of the same for Approval of the Architect.
12 03 00 Gypsum Board False Ceiling
Providing, fabrication and fixing in position of Gypsum Board False Ceiling at Specified height and at any angle/slope by fixing 12 mm
Thk. Gypsum Board sheets on framework of GI sheet sections. The main runners of 22-gauge GI sheet and cross runners of 24-gauge
GI sheet must be framed to form a mesh of 450mmX450mm c/c, intermediate section perpendicular to ceiling section space at 1200 mm
center to center suspension in L angle at every 1200 mm & perimeter along the wall / Partition. 12.5 mm Gyp board is to be fixed to the
ceiling sections with necessary screws, the joints between the boards are filled with jointing compound & tape to make plain Seamless
surface which should be in true line and level without any waves, uneven surface to take the required painting. The Rate should include
creating 6mm-8mm grooves at the edge of Ceiling or in Gypsum Board horizontally in any pattern as per the drawing by providing ₹ 17,07,778
additional ceiling sections and intermediate channels at the back of the groove for added strength, making openings for light fixtures/ any
accessories, edge coving for LED Strip Lighting, steps in the ceiling profile, making cut outs for fixtures vertical drops, offsets, scaffolding
and cleaning of floor/walls etc. complete. Additional intermediate channels should be fixed to strap hangers for additional support to
prevent strapping at every 1200 mm item to be complete in all respect. (G.I. perimeter channel size- 27mmx0.5mm thk., flange-20mm
&30mm, intermediate channel. size- 45mm & 0.9mm Thk., hanger size-25mmx0.5mm Thk.) complete. The rate shall be inclusive of
making trap doors of size 600X600 in Gypsum along with the edge/perimeter frame as required.
12 02 01 Gypboard, 12 mm thk 1,366 M2 ₹ 1,250 ₹ 17,07,778

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 14
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
12 04 00 Grid Suspension False Ceiling Works with Modular Tiles
•Providing & fixing of Armstrong or equivalent Suspended Ceiling Tiles as specified to be laid on exposed grid.
•For Bio Guard Mineral Fiber tile, tile shall be tested for Anti-Microbial activity and shall achieve an efficacy of at least 99% against
selected strands of bacteria and virus and shall be humidity resistant with RH value of 99%.
•For GI Lay-in Plain/perforated metal tile, the tile shall be consisting of 120 GSM galvanized steel in 0.4 mm thickness with Square
Tegular/Microlook 90˚ edge. The tile shall be electrostatically polyester powder coated 60-80 microns thickness. Perforated metal tile
shall be pasted with Acoustical Backing fleece Sheet.
•For Silhouette Grid Suspension, the system shall be Trulock Silhouette revealed profile grid system with 15mm wide flanges
incorporating a 3mm or 6mm central recess color, black or white revealed. Silhouette main runners and cross trees to have mitered ends
with “birds’ mouth “notches to provide mitered cruciform junctions. Main runners to be spaced at 120mm c/c fixed by using 2mm
prestraightened GI wire. Main tee, rotary stitched at every 1200mm c/c maximum and cross tee at every 600mm c/c maximum and an ₹ 18,45,437
angle all-round the wall to form a grid and suspending the grid using 2mm pre-straightened GI wire.
•For T grid exposed 24 mm wide T Suspension, the flanges shall be having roll formed double stroke rotary stitching on all T sections
i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The T Sections shall be made of hot
dipped galvanized steel of 90 GSM as per IS 277 (2003) and pre-painted steel with baked polyester paint.
•For Axiom Aluminum Straight Edge profile/Trim: Classic Axiom is a C- Shape section that provides 2 flanges of 19mm each for resting of
tiles. Classsic Axiom must be powder coated. Profile to have engineered design boss for fitment of Tee bar connector, Splice plate
Corner connector & hanger clips using Axiom Splice Plate Axiom Tee-Bar Connection Clip (AXTBCI). T-Bar connection clips are used to
attach the Axiom to the supporting Suspension system members. One clip is required at each location where the grid system intersects
the Axiom trim. Hanging Grid clips (AXHGCI): Axioms to be hung independently to the structural soffit by engaging the Hanging Grid Clip
into the boss of the Axiom trim channel and securing it to structural soffit.
12 04 01 Mineral Fiber Tile, Mold/Mildew Resistant in Tegular Edge with Silhouette Suspension, 600X600 (Tile Basic Rate) 137 M2 ₹ 2,051 ₹ 2,80,212
12 04 02 Mineral Fiber Tile Mold/Mildew Resistant in Tegular Edge with Silhouette Suspension, 600X1200 (Tile Basic Rate) 186 M2 ₹ 2,200 ₹ 4,09,867
12 04 03 GI Perforated Tile with Silhouette Suspension and Specified RAL Code, 600X600 68 M2 ₹ 2,025 ₹ 1,38,330
12 04 04 GI Plain Tile with Silhouette Suspension and Specified RAL Code, 600X600 (Tile Basic Rate) 137 M2 ₹ 1,330 ₹ 1,81,708
12 04 05 GI Plain Tile with Silhouette Suspension in Wood Finish, 600X600 (Tile Basic Rate) 205 M2 ₹ 3,770 ₹ 7,72,599
12 02 09 Aluminum Trim Straight Edge Profile, 100mm Ht
Providing and fixing Floating Edge Ceiling Cloud with Silhouette edge Axiom Trim Profile of 100X19mm at the Edge with suspension
system. Inclusive of hangers, suspension cables with all the requisite hardware etc complete. Rate includes all the material, making cut
62 RM ₹ 320 ₹ 19,872
outs/cavities for fixtures/sprinklers, scaffolding, cleaning etc. complete Note: Contractor shall arrange for his own scaffolding materials,
ladders etc., legs of the ladders shall be covered properly with gunny bags so that floor does not get damaged. Floor shall be properly
covered with plastic foam sheets to avoid any damage to the flooring.
12 02 10 Aluminum Trim Straight Edge Profile, 150mm Ht (Profile Basic Rate) 93 RM ₹ 460 ₹ 42,850
12 06 00 Clip on Ceiling Baffles Works
For WPC Baffles: Providing & fixing horizontal/Vertical WPC Panels of specified size in true line and level with planks in approved color,
texture and finish. The wall/ceiling panel shall be fixed with a tongue and groove interlocking system, with all the fixing accessories as
provided by the Manufacturer. The “Cladding work” shall include cost of all materials,, fixing accessories, all lead and lifts at all levels,
loading and unloading, transportation, Scaffolding and all other incidental charges etc., complete and as directed by the Engineer-in-
charge. In case the WPC Panels and fixing Accessories are supplied by the Client,, the cost of the same will be deducted from the Rate
however the labor and profits for the same shall be paid to the Contractor based on the Basic rate in Table below. ₹ 20,26,515
For P/C Aluminum Baffles: Providing & fixing horizontal level suspended ceiling comprising of Knauf or equivalent Vertical Linear Baffle
Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in
powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black / White). The baffle shall be electrostatically polyester powder coated
to a coating thickness of 60-80 micron. The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm)
having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected
by Baffle Joiner and the ends to be fixed with End caps.
12 06 01 WPC Baffles, 40x100mm with Suspension (Basic Rate, Material Only=) 125 RM ₹ 2,867 ₹ 3,57,739
12 06 02 WPC Baffles, 25x100mm with Suspension (Basic Rate, Material Only=) 187 RM ₹ 1,745 ₹ 3,26,589
12 06 03 P/C Metal Baffles, 25x25mm with Suspension (Basic Rate, Material Only= 275 RM ₹ 1,161 ₹ 3,18,764
12 06 04 P/C Metal Baffles, 25X100mm with Suspension 480 RM ₹ 2,130 ₹ 10,23,422
13 FLOORING & TILING WORKS ₹ 1,09,84,499

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 15
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
13 01 01 The works shall include cost of materials, labor, Edge polishing, chamfering, half/full molds, all types of grooves/roughening strip, nosing,
pencil borders, providing curved patterns, borders/bands, inlays as per design, epoxy grout of 5mm thickness, polishing, curing, acid
-
wash/Deep cleaning all lead and lifts at all levels, loading and unloading, transportation and all other incidental charges etc., complete
and as directed by the Engineer-in-charge. The rate shall be inclusive of grouting of approved make and shade.
13 01 02 02 00 General Specification for Vitrified Tiling/Flooring Works: Providing and laying Vitrified Tile of specified size and make in Flooring at
all Levels, Floors, Sills using Tiles of Specified size and make of approved color & design including inlays, bands , curved shapes as per
Flooring Layout over bedding in Cement Mortar 1:4 (using 50% river Sand & 50% crushed Sand) with Tiles laid in true line, level and
-
slope as required, including providing Cement slurry Cement slurry @ 4kg/sqm and leaving specified joints for pointing, wastage, curing,
cleaning, covering with POP, oxalic acid washing, cleaning etc., complete. Epoxy Grout with 5mm Spacer of approved shade and make
is to be included in the quote.
13 01 03 If there is change in Stone/Tile Selection or any finishing items, only the difference Amount as per the Actual Receipts for changed item +
15% will be paid/recovered from the quoted Basic Rate of the respective item. The Contractor shall submit Rate Analysis of the same for -
Approval of the Architect.
13 01 04 All the Stone/ Tiles/Engineered Stone such as Quartz etc. should be procured in one lot to avoid any variation in shade, size or
pattern/grain. Architects reserve the right to reject any such material which has significant variation in visual pattern from the majority -
items.
13 01 05 The Contractor should protect the flooring from any damages by covering it with POP or bubble sheet as required. Any damage to the tile
-
identified by the Engineer-in-Charge shall be replaced by the Contractor free of cost before handover of the building.
13 01 06 The Contractor shall protect the Epoxy Grout by restricting the foot traffic or dust ingress for minimum curing time specified by the
Manufacturer. In the event of damage to the grout or discoloration of the same, Contractor shall repair the same free of cost or amount -
debited from the bill as deemed necessary by the Architect.
13 03 00 Stone Flooring Works
Providing & laying in position machine cut polished specified Natural/ Artificial Stone Flooring as per below at all levels and floor laid over
bedding in Cement Mortar bed in 1 : 4 (using 50% river Sand & 50% crushed Sand) with specified Stone laid in true line, level, patterns
and slope as required including providing Cement slurry Cement slurry @ 4kg/sqm and leaving specified joints for pointing/Grouting,
standard wastage, curing, cleaning, covering with POP etc., complete. Specified Stone shall be of uniform color, free from defects, ₹ 13,01,634
durable, uniform Thk. and as approved by the Architect prior to cutting. The work shall include providing patterns, borders, inlays as per
design, polishing, curing, acid wash/Deep cleaning at all lead and lifts at all levels, complete and as directed by the Engineer-in-charge.
The Stone specified for flooring is as follows,

13 03 01 Granite Flooring, Steel Grey (Basic Rate : Refer to Annexure Sheet) 15 M2 ₹ 1,896 ₹ 29,198
13 03 02 Granite Flooring, Indian Paradiso (Basic Rate : Refer to Annexure Sheet) 19 M2 ₹ 2,578 ₹ 49,627
13 03 04 Italian Marble Flooring (Basic Rate : Refer to Annexure Sheet) 28 M2 ₹ 5,834 ₹ 1,63,352
13 03 05 Kota Pre-Polished Stone Tile, 600X600mm (Basic Rate : Refer to Annexure Sheet) 46 M2 ₹ 1,247 ₹ 57,611
13 03 08 Basalt Stone Flooring, Honed Finish, 20mm Thk (Basic Rate : Refer to Annexure Sheet) 351 M2 ₹ 2,733 ₹ 9,58,048
13 03 09 Granite/Marble/Stone Band in Flooring, 75mm Wide (Basic Rate : Refer to Annexure Sheet) 23 RM ₹ 355 ₹ 8,201
13 03 10 Granite/Marble/Stone Band in Flooring, 100mm Wide (Basic Rate : Refer to Annexure Sheet) 31 RM ₹ 409 ₹ 12,597
13 03 11 Granite/Marble/Stone Band in Flooring, 150mm Wide (Basic Rate : Refer to Annexure Sheet) 19 RM ₹ 518 ₹ 9,972
13 03 12 Granite/Marble/Stone Band in Flooring, 300mm Wide (Basic Rate : Refer to Annexure Sheet) 15 RM ₹ 846 ₹ 13,028
13 04 00 Stone Riser & Tread Works
Providing & Laying in position Treads, Risers and Mid-Landing Flooring for Staircases with Specified Natural/ Artificial Stone at all levels
and floors over bedding in Cement Mortar bed in 1 : 4 (using 50% river Sand & 50% crushed Sand) with specified Stone laid in true line,
level, pattern, slope, and inclusive of making Nosing in 6-8mm Chamfer, Edge Polish, Edge Strip/Groove for Anti-Skid required including
₹ 10,78,445
providing Cement slurry @ 4kg/sqm and pointing of joints to match the color of selected Stone, curing, cleaning, covering with POP etc.,
complete. The specified Stone shall be of uniform color, free from defects, durable, uniform Thk. and as per approved design. In case PU
Adhesive is used for pasting Riser and Tread on Metal Substrate, the difference in Cost + 15% will be paid to the Contractor upon actual
Receipts and Rate Analysis submitted)
13 04 02 Granite Treads & Risers, Indian Paradiso (Basic Rate : Refer to Annexure Sheet) 333 M2 ₹ 3,237 ₹ 10,78,445
13 05 00 Vitrified Tiling/Flooring, 600 X 600
₹ 3,02,885
(Refer to general Specifications 13 01 02 Above)
13 05 01 Vitrified Flooring, Tile-600 X 600, Type-1 (Basic Rate : Refer to Annexure Sheet) 190 M2 ₹ 1,127 ₹ 2,14,192
13 05 03 Vitrified Flooring, Tile-600 X 600, Type-3 (Basic Rate : Refer to Annexure Sheet) 63 M2 ₹ 1,400 ₹ 88,692

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 16
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
13 10 00 Vitrified Planks/Easel Splits Flooring Works
₹ 80,549
(Refer to general Specifications 13 01 02 Above)
13 10 01 Vitrified Planks/ Easel Splits, Type -1 (Basic Rate : Refer to Annexure Sheet) 51 M2 ₹ 1,567 ₹ 80,549
13 13 00 Concrete / IPS Polished Flooring Works
Providing and Laying IPS flooring while casting of slab using Concrete hardener topping, of specified Thickness and grade in 1:2:4 (max.
12 mm size Metal Aggregate) laid with BASF make hardener as specified by Structural Consultant and laid in panels of specified area
using Steel Formwork with sturdy Steel channel sections, mechanically vibrated with surface and needle vibrators including " TREMIX "
curing. The top layer, 12 mm Thk. Cement hardener consists of mix 1:2 (1 Cement hardener mix : 2 graded Stone Aggregate 6 mm
nominal size) by volume, hardening compound mixed @ 2 liter per 50 kg of Cement or as per manufacturer’s specifications. This includes
cost of Cement slurry but excluding the cost of nosing of steps etc. complete. The Rate to include vacuum dewatering, polishing surface ₹ 10,02,885
by mechanical floaters with LIQUI-HARD or equivalent Concrete Densifier and Hardener and filling the expansion joints with material,
cleaning with chemicals specified by consultant at all levels and heights and as directed. Provision of Reinforcement Steel in the flooring
will be as per the Structural Designer's recommendation. The Reinforcement Steel item shall be measured and paid for under
Reinforcement Steel. For the specifications for Reinforcement Steel tying refer to Reinforcement Steel item. (Rate to include expansion
joint filling material and applications). to proper and approved slope & finished smooth with a Tremix vibrator without any marking lines
and stained with approved color stainer of ASIAN PAINTS or equivalent brand as per process to approval.
13 13 01 Concrete/ IPS Flooring 1,543 M2 ₹ 650 ₹ 10,02,885
13 14 00 Grooving Works in Tremix/IPS Floor
Making Manual Grooves in the TREMIX Wet Concrete Floor using square wooden trowel by scoring method as per the detailed drawings
and procedure explained by the Architect including cleaning etc. complete (The size of the groove to be 4 mm X 10 mm) Providing and
filling the floor grooves of 4 mm X 10 mm with approved poly sulfide sealant of Fosroc / Sunanda Chemicals or other approved make as ₹ 1,54,290
per the procedure laid down by the manufacturer. The Rate to include for cleaning of the grooves as per the manufacturer's requirement,
filling of the sealant as per the procedure specified by the manufacturer, cleaning after the completion of work etc. to the entire
satisfaction of the Engineer in Charge.\
13 14 01 Trowel Finish Scoring (Grooving)/ Edging in Wet Concrete 1,543 M2 ₹ 100 ₹ 1,54,290
13 15 00 Vinyl/Carpet Flooring
Providing & fixing of specified thickness antistatic, homogeneous, flexible, non-toxic Vinyl /Carpet Flooring in Roll or Tile form of
approved quality over provided I.P.S./ Kota stone flooring/ Mapei Ultra plan Eco 20 or equivalent Self leveling compound in 10-12mm
thickness if required, including 100 mm skirting in roll form over wall with approved Adhesive by Architect, all joints to be filled/welded
together by PVC soldering rods of matching color as per manufacturers specifications etc. complete & as directed by the Engineering-In- ₹ 47,10,396
Charge including proper line,level,cleaning (Roll width 2 M X 10XM). The I.P.S./ Kota stone/ Self Leveling compound shall be paid for
separately. In case the Vinyl carpet/rolls are supplied by the owner, the cost of such item will be deducted from the Rate however the
labor and profits for the same shall be paid to the Contractor based on the Basic Rate given for that respective item in Basic rate Sheet.
The contractor should submit the rate analysis accordingly at the time of the billing.
13 15 01 Vinyl Carpet Tiles/Roll Form (Basic Rate : Refer to Annexure Sheet) 1,448 M2 ₹ 2,153 ₹ 31,16,653
13 15 02 Woolen / Synthetic Carpet Tiles, 60X60 (Basic Rate : Refer to Annexure Sheet) 329 M2 ₹ 2,476 ₹ 8,14,580
13 15 03 Substrate (Self leveling Compound) 1,448 M2 ₹ 538 ₹ 7,79,163
13 19 00 Stone Daddo/Surface Cladding Works in PU Adhesive
Providing and laying Daddo/Surface Cladding of Specified Stone of size, make and color & design including bands and patterns as per
Layout/Drawing vertically or horizontally using Mapei Keralistic or equivalent Polyurethane Adhesive using only notch trowel with combing
application of adhesive thickness as per manufacturers recommendation on any substrate, laid in true line, level, pattern and leaving
specified joints for pointing, cutting holes in Stone of any size, wastage, curing, cleaning, covering with POP, oxalic acid washing,
Scaffolding etc., complete. The work shall include cost of materials, labor, chasing of wall to flush the dado in line with the wall, V-groove
at corner/Edge, all lead and lifts at all levels, loading and unloading, transportation and all other incidental charges etc., complete and as ₹ 11,48,473
directed by the Engineer-in-charg. The Contractor shall avoid any “spot application of adhesive” and shall document the entire application
process by numbering every application and showing its notch trowel application through videos for records through random checks. In
case the stone is detached due to spot application, the dues for the same shall be recovered from the Contractors security deposit. The
work shall include cost of materials, labor, chasing of wall to flush the dado in line with the wall, L or V-groove at corner/Edge by the
Architect, all lead and lifts at all levels, loading and unloading, transportation and all other incidental charges etc., complete and as
directed by the Engineer-in-charge.
13 19 02 Engineered Quartz Stone Cladding (Basic Rate : Refer to Annexure Sheet) 110 M2 ₹ 7,278 ₹ 8,00,532
13 19 04 Italian Marble Stone Cladding (Basic Rate : Refer to Annexure Sheet) 25 M2 ₹ 8,207 ₹ 2,05,187
13 19 05 Mint Limestone Cladding (Basic Rate : Refer to Annexure Sheet) 25 M2 ₹ 5,435 ₹ 1,35,879

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 17
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
13 02 43 “L” Groove 55 RM ₹ 60 ₹ 3,300
13 02 44 “V” Groove 55 RM ₹ 65 ₹ 3,575
13 20 00 Tile Daddo/Surface Cladding Works in Tile Adhesive
Providing and laying Daddo of Vitrified Tiles of specified size and make of approved color & design including bands and patterns as per
Tiling Layout in Mapei Keraflex or equivalent Cementitious Adhesive on any substrate, laid in true line, level, pattern and leaving
specified joints for pointing, wastage, curing, cleaning, covering with POP, oxalic acid washing etc., complete. Epoxy Grout with 5mm
₹ 5,76,114
Spacer of approved shade and make is to be included in the quote. The work shall include cost of materials, labor, chasing of wall to
flush the dado in line with the wall, L-groove at corner, all lead and lifts at all levels, loading and unloading, transportation and all other
incidental charges etc., complete and as directed by the Engineer-in-charge.

13 20 11 Subway Tile, 100X300 , Type -1 (Basic Rate : Refer to Annexure Sheet) 115 M2 ₹ 1,189 ₹ 1,37,307
13 20 12 Subway Tile, 100X300 , Type -2 (Basic Rate : Refer to Annexure Sheet) 315 M2 ₹ 1,393 ₹ 4,38,807
13 21 00 Stone Skirting
Providing and laying 20mm Thk. machine cut natural /Engineered skirting at all levels and floor of specified height over average 10mm
Thk. Back coat Plaster in Cement Mortar 1:4 laid in true line, level, pattern and pointing of joints with matching grout of approved make to
match the color of marble etc., complete. The work shall include cost of materials, labor, curing, back coat Plaster, chasing of wall to ₹ 49,995
flush the skirting in line with the wall, L-groove at corners, all lead and lifts at all levels, loading and unloading, transportation and all other
incidental charges etc., complete and as directed by the Engineer-in-charge.

13 21 01 Granite Skirting (Basic Rate : Refer to Annexure Sheet) 263 RM ₹ 190 ₹ 49,995
13 22 00 Vitrified Skirting
Providing and laying Glazed Vitrified Tile Skirting at all levels and floors of Specified Height of Kajaria / Johnson / Nitco make Tiles of
(size 600 X 600 mm) approved color & design over average 10mm Thk. Back coat Plaster in Cement Mortar 1:4 with Tiles laid in true
line, level and slope as required, including pointing of joints with color pigments to match the color of Tiles. The work shall include cost of ₹ 72,236
materials, labor, curing, chasing of wall to flush the skirting in line with the wall, V-groove at corners, all lead and lifts at all levels, loading
and unloading, transportation and all other incidental charges etc., complete and as directed by the Engineer-in-charge.

13 22 02 Vitrified Skirting (600x600), 100mm Height (Basic Rate : Refer to Annexure Sheet) 535 RM ₹ 135 ₹ 72,236
13 23 00 Staircase Skirting Works in Stone
Providing and laying 20mm Thk. machine cut natural /Engineered skirting at all levels and floor as per Architectural drawing over average
10mm Thk. Back coat Plaster in Cement Mortar 1:4 laid in true line, level, pattern and pointing of joints with matching grout of approved
make to match the color of marble etc., complete. The work shall include cost of materials, labor, curing, back coat Plaster, chasing of ₹ 3,89,498
wall to flush the skirting in line with the wall, L-groove at corners, all lead and lifts at all levels, loading and unloading, transportation and
all other incidental charges etc., complete and as directed by the Engineer-in-charge.

13 23 01 Granite Skirting, (Basic Rate : Refer to Annexure Sheet) 144 M2 ₹ 1,907 ₹ 2,74,694
13 23 03 Kotta Skirting, (Basic Rate : Refer to Annexure Sheet) 72 M2 ₹ 1,594 ₹ 1,14,804
13 26 00 Kitchen/Wash Basin Platform Works in Stone
Providing and fixing Sandwich type Granite platform for kitchen/toilets etc. at all levels and floors with 20mm Thk. bedding in Cement
Mortar bed 1:4 with pre-polished specified Stone on top and 25mm Thk. Kadapa Stone in bottom as per detail with 40 mm Thk. As per
drawing vertical support in Kadapa Stone with both sides polished at every one-meter interval including providing 100 mm granite
horizontal/ vertical facia as per detailed drawings. The Rate to include cutting groove in wall finishing / grouting with Cement Mortar,
cutting granite for sink/wash basin, making holes for pipes and sealing the joints of wash basin /sink with white Cement, curing, surface 9 M2 ₹ 2,812 ₹ 25,983
protection, cleaning whenever instructed, pointing of joints with colored Cement, making exposed edge bullnose complete at all levels,
inclusive of materials, labor, polish, grouting, necessary chamfering, edge polishing, nosing, grooves, moulding as required lead, lift,
curing, scaffolding, making of holes, cut outs for services all as per approved shop drawings & work methods to the satisfaction of the
Engineer-in-charge. (Plan area in square meter only shall be measured for payment).
13 28 00 Pencil Border Works (Basic Rate : Refer to Annexure Sheet)
Providing and fixing in position Specified Stone Pencil Border height as per the architectural drawing to any substrate complete. The rate
260 RM ₹ 350 ₹ 91,118
shall be inclusive of materials, labor, polish, necessary chamfering, edge polishing to the satisfaction of the Engineer-in-charge.

14 DOOR WORKS ₹ 39,29,482

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 18
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
14 01 01 The work shall include cost of materials, labor, all Philips head screws/nails, hardware/Iron Mongery, Adhesive or any fixing accessories
required, all lead and lifts at all levels, wastage, loading and unloading, transportation, scaffolding and all other incidental charges etc., -
complete and as directed by the Engineer-in-charge.
14 01 02 The Doors are made up of Door Frame and Door Shutters. The Contractor shall treat the Door Frames and Door Shutters as separate
items while quoting and not as a single combined item. The unit of Measurement for Door Frame shall be Running Meter and for Door -
Shutter, it shall be square meter as shown in BOQ.
14 01 03 General Specification for Door Frame: Providing, assembling and fixing in position the Door Frame to be made from a composite of
18mm Thk. Commercial Plywood, with MDF or Laminate on both sides, with BTC edge rounded Trim of specified size on both edges, or
any combinations thereof as specified below and BTC Doorstop/Kani on three sides as per the Architectural drawing. In the case of MDF,
the frame will be finished with a primer & two coats of Matt finish Enamel paint as per Shade Specified. Four numbers of approved
fasteners / eight full threaded Philips Screws shall be provided on each side of all frames and fixed to the walls all complete as per the -
details. The Rate is applicable for work at all levels, inclusive of materials, labor, fixing of door frame to Wall/Substrate with anchor
fastener /Screws etc., complete all as per approved shop drawings, relevant IS Code, work methods and as per the instructions of
Engineer. Note: All the hardware and Iron Mongery such as Hinges, Locks, Tower Bolts, Door Stopper or any other Accessories are NOT
TO BE INCLUDED and shall be paid seperately.
14 01 04 The Contractor to submit the samples of materials and shades/swatches of Laminates for approval from Architect. -
14 01 05
In case of change of Commercial Ply/Shutter/MDF to Waterproof Plywood/Shutter, Selection of HDF Shutters to Designer Series etc.
-
only difference amount as per the actual receipts for changed item + 15% will be paid/recovered from the quoted Rate of respective item.
14 01 06 In case of change in Shutter Sizes, the unit of measurement shall be square meter calculated inversely from the rate of the respective
-
item. The Architect shall approve such rate.
14 01 07 The owner reserves the right to mix and match any combination of door frames and door shutters. -
14 15 00 Factory Made Flush Door Shutter with Laminate & Edge Beading
Providing, Assembling and fixing in position Factory Made Flush Door of specified thickness in Single/Double shutter configuration with
teak wood edge beading as specified at all levels and floor. The Shutters will be finished by 1mm laminate as per selection on both sides
by using Adhesive of approved make as per the drawing. The Rate is applicable for work at all levels, inclusive of materials, labor, fixing
of shutters to door frame, with SS Screws/ Adhesive, French polish of approved shade for beading etc., complete all as per approved ₹ 10,91,421
shop drawings, relevant IS Code, work methods and as per the instructions of Engineer.
Note: Iron Mongery such as Hinges, Locks, Tower Bolts, Door Stopper or any other Accessories are NOT TO BE INCLUDED and shall
be paid seperately.

14 15 02 TYPE 2, 36" Width (Refer to Door Drawing for the Sizes & Nos.) 80 EACH ₹ 11,217 ₹ 8,97,360
14 15 03 TYPE 3, 32" Width (Refer to Door Drawing for the Sizes & Nos.) 21 EACH ₹ 9,241 ₹ 1,94,061
14 16 00 Factory Made Waterproof Flush Door Shutter with Laminate & Edge Beading
Providing, Assembling and fixing in position Factory Made Waterproof Flush Door of specified thickness in Single/Double shutter
configuration with teak wood edge beading as specified at all levels and floor. The Shutters will be finished by 1mm laminate as per
selection on both sides by using Adhesive of approved make as per the drawing. The Rate is applicable for work at all levels, inclusive of
materials, labor, fixing of shutters to door frame, with SS Screws/ Adhesive, French polish of approved shade for beading etc., complete ₹ 2,66,725
all as per approved shop drawings, relevant IS Code, work methods and as per the instructions of Engineer.
Note: Iron Mongery such as Hinges, Locks, Tower Bolts, Door Stopper or any other Accessories are NOT TO BE INCLUDED and shall
be paid seperately.

14 16 03 TYPE 3, 32" Width (Refer to Door Drawing for the Sizes & Nos.) 25 EACH ₹ 10,669 ₹ 2,66,725

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 19
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
14 20 00 SS Fire Rated Door with SS Frame
Providing and fixing SS door frame with side hung double leaf two-hour fire Rated door of Shakti Hormann or another approved make.
The door leaves and the core to be made from fire resistant material. The door shall be 2.0 Hr. FRD and the Contractor shall give the
certificate for same. The door shall be 55 mm Thk. asbestos free composite Fire/smoke wooden shutter comprising of two 12 mm Thk.
non-combustible boards Sandwiching 25 mm Thk. fire resistance insulation material faced with 3 mm commercial ply on both side with
heat activated inducement fire seal strip of size 12x5 mm mounted on grooves of hardwood leaping on three sides except bottom. The
door is to be provided with fireproof Wired Glass of 6 mm and is finished with two coats of fire-retardant paint and specialized fire hinges,
closers and Handles. The doors will have pressed MS frames in a suitable section and rebate for mounting Fire-Resistant Shutters of ₹ 9,12,000
120 minutes rating with one coat of rust converter and 2 coats of enamel paint. The finished door opening sizes have been mentioned in
the Architectural drawings. The sample for the iron Mongery/signage to be approved by the Architect prior to placing of the final order
&cost for the same shall be included in this item Rate. The Rate is applicable for work at all levels, inclusive of materials, labor, fixing of
shutters with door frame, with anchor fastener / hold fast, curing, scaffolding etc., complete all as per approved shop drawings, relevant
IS Code and as per the instructions of Engineer in Charge. ('Shakti Hormann' or equivalent.)

14 20 01 Type 1, (40"+40") Two Leaves 19 EACH ₹ 48,000 ₹ 9,12,000

14 23 00 Vision Panel with Aluminum Edge Frame in Shutter
Providing & Fixing Vision Panel into Door/Partition or any surface using 5mm Thk. Glass and Aluminum Powder Coated L frame as
specified. The Rate is applicable for work at all levels, inclusive of materials, labor, fixing of vision panel to shutter/partitions, with SS ₹ 31,680
Screws/ Adhesive, etc., complete.

14 02 21 Factory made Aluminum P/C Edge "L" Frame, 20X20X3mm Thk as per RAL Code ((Basic Rate : Refer to Annexure Sheet) 158 RM ₹ 200 ₹ 31,680
14 24 00 Glazing with Beading ₹ 32,648
08 02 01 Clear Glass, 5mm Thk 33 M2 ₹ 1,000 ₹ 32,648
14 27 00 Iron Mongery/ Hardware (SS 304)
Procuring, transporting, and fixing Iron Mongery such as hinges, tower bolts, door Locks, aldrops, SS kick/ Stretcher plates, door closer,
₹ 15,95,008
door stoppers, Handles, push plates etc. as approved by client / Architect complete.. The Rate is applicable for work at all levels,
inclusive of materials, labor, with SS Screws/ Adhesive, etc., complete.
14 27 01 SS Butt Hinges, 4" (Basic Rate : Refer to Annexure Sheet) 404 EACH ₹ 792 ₹ 3,19,968
14 27 03 Tubular Lever Mortise Handle with Lock Body (Basic Rate : Refer to Annexure Sheet) 101 EACH ₹ 5,112 ₹ 5,16,312
14 27 05 Aluminum Door Closer (Basic Rate : Refer to Annexure Sheet) 101 EACH ₹ 4,860 ₹ 4,90,860
14 27 07 Door Stopper, Wall Mounted (Basic Rate : Refer to Annexure Sheet) 101 EACH ₹ 350 ₹ 35,350
14 27 16 D Pull Handle, 600 mm (Basic Rate : Refer to Annexure Sheet) 48 EACH ₹ 1,448 ₹ 69,504
14 27 20 Tower Bolt 12" (Basic Rate : Refer to Annexure Sheet) 101 EACH ₹ 1,614 ₹ 1,63,014
15 PARTITION WORKS ₹ 39,25,018
15 01 01 The work shall include cost of materials, labor, all Philips head screws/nails, hardware/Iron Mongery, Adhesive or any fixing accessories
required, all lead and lifts at all levels, wastage, loading and unloading, transportation, scaffolding and all other incidental charges etc., -
complete and as directed by the Engineer-in-charge.
15 01 02 If there is change in Aluminum Sections, Gypsum Boards, such as Calcium silicate or change in Surface Finish / Texture of Extrusions or
requirement, only the difference Amount as per the Actual Receipts for changed item + 15% will be paid/recovered from the quoted Rate -
of the respective item.
15 03 00 Gypsum Dry Wall Partition Works, 100mm Thk
Providing and installing. Dry wall partitions of specified thickness in Gyproc or equivalent, non-load bearing having sound insulation 40
DB Gypserra of equivalent metal stud partition comprising of a composite framework which includes a Serrated Acoustic of size
92X34X36mm each placed at 610 mm center to center in Floor & Ceiling Channel of size 94 x 32 x 32 mm floor and Noging Channel at
2400mm height for horizontal support or for supporting top and bottom of Switchboards wherever required, with the help of nylon sleeves
and Screws. Two layers of 12 mm Thk. Gypsum boards are then Screw fixed to the studs and channels at 200 mm centers on both
sides of the framework, with 25 & 35 mm long self-drilling& tapping Screws having Phillips head with under head cutter, for first- and 1,140 M2 ₹ 1,938 ₹ 22,08,236
second-layer boards respectively. The board’s joints are to be staggered to avoid through passage. Finally, the edges of the facing
boards are to be jointed and finished so as to have a seamless finish which includes filling and finishing with specially formulated jointing
compound and 48 mm wide self-adhesive fiber tape. Cement Primer (Oil based) to be provided on entire surface before putty/ painting,
including horizontal bracing channel at every 1 M. level on both sides. If the partition height exceeds the board length to provide edge
support to the board, including all material, labor, scaffolding etc. complete.

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 20
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
15 04 00 Gypsum Dry Wall Partition Works, 150mm Thk
Providing and installing. Dry wall partitions of specified thickness in Gyproc or equivalent, non-load bearing having sound insulation 40
DB Gypserra of equivalent metal stud partition comprising of a composite framework which includes a Serrated Acoustic of size
92X34X36mm each placed at 610 mm center to center in Floor & Ceiling Channel of size 94 x 32 x 32 mm floor and Noging Channel at
2400mm height for horizontal support or for supporting top and bottom of Switchboards wherever required, with the help of nylon sleeves
and Screws. Two layers of 12 mm Thk. Gypsum boards are then Screw fixed to the studs and channels at 200 mm centers on both
sides of the framework, with 25 & 35 mm long self-drilling& tapping Screws having Phillips head with under head cutter, for first- and 27 M2 ₹ 2,476 ₹ 67,837
second-layer boards respectively. The board’s joints are to be staggered to avoid through passage. Finally, the edges of the facing
boards are to be jointed and finished so as to have a seamless finish which includes filling and finishing with specially formulated jointing
compound and 48 mm wide self-adhesive fiber tape. Cement Primer (Oil based) to be provided on entire surface before putty/ painting,
including horizontal bracing channel at every 1 M. level on both sides. If the partition height exceeds the board length to provide edge
support to the board, including all material, labor, scaffolding etc. complete.
15 05 00 Glass Partition Works in Male and Female Sections
Providing and fixing Frameless Fixed Glazing made up of 12mm Thk. Toughened Glass fixed on top and bottom with Aluminum “U”
Channels (Hafele., Hettich or equivalent) fixed flush to the floor level. Rate to include providing sealant in the joints, backer rod, all other
₹ 8,32,675
necessary hardware, levelling and maintaining uniform grooves and levels. complete as per detail drawing. Note: The Actual Glass
Partition Surface Area would be measured and paid as per the finish in the respective items.

15 02 01 Aluminum Male/Female "U" Channel For Glass 259 RM ₹ 1,615 ₹ 4,18,227

09 02 07 Sun Control Film- Garware/LG or Equivalent, 2 Mil Thk as per Architects Selection 518 M2 ₹ 800 ₹ 4,14,448
15 10 00 Aluminum Glazed Partition Works
Providing and fixing powder coated Aluminum Glazing Partition System with a combination of clear/ film coated Saint Gobain or
equivalent clear Toughened Glass of 6mm thickness on Aluminum framework with capping using specially designed powder coated
vertical mullion & horizontal transoms of required size & as per Architect's approved grid work with Aluminum rectangular sections to be
fixed to Floor by Screws and to Concrete slab with 50 mm x 50 mm x 6mm Thk. galvanized bracket/angle, as per Architects drawing in
the Plumb for the line levels. The Glass panel’s shall be fixed on a specially designed Architectural sub- frame using EPDM Gasket and
covered with pressure plate and capping or Dow Corning 995 structural sealant & GE Silicon (SSG – 4000) in a manner that no ₹ 4,01,843
Aluminum frame is visible from outside & grooves between the Glass panel shall be filled with weather sealant of Dow corning 789 / GE
Sil proof to made it air tight, water proof & dust free thus giving it a flush look outside, if applicable. The glass will be 5 mm Thk. of
specified type with heat strengthened and toughened. The Rate shall be inclusive of Aluminum Extruded Profiles, Glass, EPDM Gasket,
Accessories, Epoxy-Polyester hybrid powder coating of 65 micron in approved RAL Shade and finish/texture on all Extrusions, fabrication
and installation, frame fixing in position by Fischer Screw mechanism, sealants, scaffolding etc., complete with Design, supply, fabrication
& erection of approved structural Glazing using the following.
15 10 01 Mullion (57X64mm, Jindal Code:22715 Weight-1.777Kg/RM) 600 KG ₹ 280 ₹ 1,68,015
15 10 02 Transom (57X64mm, Jindal Code:22715 Weight-1.777Kg/RM) 29 KG ₹ 280 ₹ 8,160
15 10 03 Pressure Plate (Jindal Code:22711, Weight: 0.434 Kg/RM) 154 KG ₹ 280 ₹ 43,028
15 10 04 Capping (Jindal Code: 22712, Weight:0.343 Kg/RM) 121 KG ₹ 280 ₹ 34,006
Add Wastage in Percentage % ₹ 0 ₹ 12,660
Add Transportation % ₹ 0 ₹ 7,596
Add Labor % ₹ 0 ₹ 75,963
Add Overheads & Profits % ₹ 0 ₹ 52,414
15 12 00 Glass Privacy Films
Providing and fixing privacy Film of specified thickness of Garware or equivalent make to any glass surface as directed. The job should
₹ 1,00,546
be complete without any air bubbles trapped in the film.

15 12 01 Opaque Film Type 1 27 M2 ₹ 646 ₹ 17,486

15 12 02 Frosted Film Type 2 41 M2 ₹ 538 ₹ 21,858
15 12 03 Louvred Film Design Type 3 47 M2 ₹ 646 ₹ 30,601
15 12 04 Louvred Film Design Type 3 47 M2 ₹ 646 ₹ 30,601
15 13 00 Blinds for Partitions/ Windows ₹ 1,78,505
15 13 01 Roller Blinds Black Out 68 M2 ₹ 1,292 ₹ 87,431
15 13 02 Roller Blinds Semi Transparent 68 M2 ₹ 1,345 ₹ 91,074
15 17 00 Glazing in Partitions, 5mm Clear Glass ₹ 1,35,377

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 21
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
08 02 01 Clear Glass, 5mm Thk 135 M2 ₹ 1,000 ₹ 1,35,377
16 TOILET WORKS ₹ 10,99,980
16 04 00 Modular Urinal Partitions
Providing & fitting modular urinal partition in 12mm Thk. Modular Partition in Greenlam/ Merino or Equivalent in phenolic bonded board
with compact laminate on both sides with melamine colored finish with L brackets, fittings and bracing etc. Panel height is 800mm X ₹ 84,000
500mm deep.

16 04 01 Urinal Partition, As Per Architectural Drawings 14 EACH ₹ 6,000 ₹ 84,000

16 05 00 Sanitaryware ₹ 4,22,030
16 05 01 Wall Hung WC with Fixing Accessories 28 EACH ₹ 9,585 ₹ 2,68,380
16 05 03 Urinal with Fixing Accessories 14 EACH ₹ 4,100 ₹ 57,400
16 05 07 Wall mounted Wash Basin (Large) with Pedestal and Fixing Accessories 35 EACH ₹ 2,750 ₹ 96,250
16 06 00 Faucets & Showers ₹ 85,750
16 06 16 Pillar Cock with Autoclosing System 35 EACH ₹ 2,450 ₹ 85,750
16 07 00 Flushing & Drain System ₹ 1,93,200
16 07 01 Flush Valve 42 EACH ₹ 3,850 ₹ 1,61,700
16 07 07 Nahani Trap, SS with Anticockroach Jali 63 EACH ₹ 500 ₹ 31,500
16 08 00 Washroom Accessories ₹ 35,000
16 08 05 Mirror (Size) 14 EACH ₹ 2,500 ₹ 35,000
16 10 00 Water Dispenser ₹ 2,80,000
16 10 01 Water Dispenser 7 EACH ₹ 40,000 ₹ 2,80,000
16 12 00 Disabled Bathroom Accessories ₹ 28,000
16 12 01 Grab Bar, 692 mm Long 7 EACH ₹ 4,000 ₹ 28,000
17 PAINTING WORKS ₹ 38,85,879
17 01 01 For all the Paint jobs, the Contractor shall prepare the surface by cleaning, filling up the cracks with crack filler, erecting and dismantling
of scaffolding as & when it is required, finishing the surface with roller etc., complete. Note: Contractor shall arrange for his own
-
scaffolding materials, ladders etc., legs of the ladders shall be covered properly with gunny bags so that floor does not get damaged. The
floor shall be properly covered with plastic sheets to avoid spillage from paint while applying etc., complete.
17 01 02 If there is change in change in Surface Finish / Texture, only the difference Amount as per the Actual Receipts for changed item + 15%
-
will be paid/recovered from the quoted Rate of the respective item.
17 01 03 All the Painting work shall be carried out strictly by using Painter’s masking tape to protect the other surfaces, corners etc. and ensure
-
clean line of finished paint.
17 01 04 In case of two or three different shades of paint in a Geometric Pattern, the Contractor should first carry out marking/ lineout by chalk of
the pattern on the surface to be painted as per the Architects drawings and get it approved by the Architect before proceeding. Such job -
should be carried out using double scaffolding/edge frames to ensure good workmanship.
17 01 05 The rate is included for all the shades in a manufacturers catalogue and dark shades shall not be paid seperately. -
17 01 06 The Contractor shall provide the samples and swatches of paints, without restriction on 1’X1’ MDF boards using primer and two coats of
-
paint in specified shade and texture.
17 01 07 In case the Contractor wishes to change the make/brand of specified paint, he should match 100% the shade to the specified paint by
matching its RAL value. The responsibility for such matching rests with the Contractor and Architect shall reject such job in which paint -
shades are not matching the specified shade.
17 01 08 The painting of interior or exterior grooves in contrasting shade is to be carried out by taping the edges, and the rate for such shall be
-
included in the scope. Contractor shall not be paid seperately for the same.
17 01 09 The work shall include cost of materials, labor, taping, painting of grooves in contrasting colors and all the items mentioned above, all
lead and lifts at all levels, deep cleaning, wastage, loading and unloading, transportation, double scaffolding and all other incidental -
charges etc., complete and as directed by the Engineer-in-charge.
17 04 00 Lustre Paint
Providing and applying Luster paint at all levels and floors of approved color, shade with 2 coats of Asian (or Berger, Dulux, make, etc.)
7,134 M2 ₹ 377 ₹ 26,89,510
with roller finish including wall putty and one coat of s/b primer for Internal walls, as per manufacturers/technical Specifications, to the
satisfaction of the Engineer- in-charge till the surface is achieved with required opacity.
17 07 00 Melamine Polish Works
Providing and applying Melamine polish to new woodwork as per manufacturers/technical Specifications for required finishing including. 214 M2 ₹ 800 ₹ 1,71,216
knotting, preparing the surfaces, scaffolding etc. complete as directed.
05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 22
 YRG CARE
CHENNAI
TAMIL NADU

SPAP Code™ Scope Description Quantity Unit Unit Cost Cost Total
17 08 00 French Polish Works
Providing and applying French polish to new woodwork, as per manufacturers/technical Specifications, for required finishing including. 214 M2 ₹ 377 ₹ 80,685
knotting, preparing the surfaces, scaffolding etc. complete as directed.
17 09 00 Interior Texture Stucco Works
Providing and applying interior Texture treatment and one coat of primer before applying textured paint including scaffolding, if necessary
at all heights and locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning 214 M2 ₹ 2,045 ₹ 4,37,670
and curing etc. complete as directed by Engineer-in-charge.

17 10 00 Interior Texture Archicrete Works

Providing and applying interior Archicrete Texture treatment and one coat of primer before applying textured paint including scaffolding, if
necessary at all heights and locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, 214 M2 ₹ 2,368 ₹ 5,06,798
cleaning and curing etc. complete as directed by Engineer-in-charge.

A Civil Cost ₹ 14,43,66,103

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 23
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. DESCRIPTION QUANTITY UNIT UNIT COST COST TOTAL

18 EQUIPMENT WORKS ₹ 92,04,000
1 STACK PARKING 10 EACH ₹ 2,12,400 ₹ 21,24,000
2 ELEVATOR
SITC OF 10 PASSENGER CUM STRETCHER/ HOSPITAL GEARLESS LIFT /680 Kg
MR/MRL, COPO/ TOPO (ELEVATOR 01)
DUCT SIZE - 1700 X 2410 MM , doors with frame having opening of 1100/1200 mm wide X 2100mm high, Automatic
2.1 1 EACH ₹ 22,40,000 ₹ 22,40,000
Rescue Device, Audio- Visual, Overload indicator, Infra red curtain, 3VF drive, Emergency alarm, Fire alarm switch,
overload warning indicator, suitable door safety as specified, suitable for physically challenged persons, complete in all
respect as specified in technical specifications. The lift shall be provided with 3 year free defect liability period.

SITC of Passenger hospital gearless lift for 14 Passenger/952 Kg, G+7 , Terrace floor (9 Stops/9 Landings)

SITC OF 15 PASSENGER CUM STRETCHER/ HOSPITAL GEARLESS LIFT /1020 Kg

MR/MRL, COPO/ TOPO (ELEVATOR 03)
DUCT SIZE - 1950 X 3000 MM , doors with frame having opening of 1100/1200 mm wide X 2100mm high, Automatic
2.2 1 EACH ₹ 12,00,000 ₹ 12,00,000
Rescue Device, Audio- Visual, Overload indicator, Infra red curtain, 3VF drive, Emergency alarm, Fire alarm switch,
overload warning indicator, suitable door safety as specified, suitable for physically challenged persons, complete in all
respect as specified in technical specifications. The lift shall be provided with 3 year free defect liability period.

SITC of Passenger cum stretcher/ hospital gearless lift for 15 Passenger/1020 Kg, B1,G+2 (4 Stops/4 Landings) ₹ -

SITC OF 26 PASSENGER CUM STRETCHER/ HOSPITAL GEARLESS LIFT / 1768 Kg

MR/MRL, COPO/ TOPO (ELEVATOR 02)
DUCT SIZE - 2150 X 3150 MM , doors with frame having opening of 1100/1200 mm wide X 2100mm high, Automatic
2.3 1 EACH ₹ 22,40,000 ₹ 22,40,000
Rescue Device, Audio- Visual, Overload indicator, Infra red curtain, 3VF drive, Emergency alarm, Fire alarm switch,
overload warning indicator, suitable door safety as specified, suitable for physically challenged persons, complete in all
respect as specified in technical specifications. The lift shall be provided with 3 year free defect liability period.
SITC of Passenger cum stretcher/ hospital gearless lift for 15 Passenger/1020 Kg, G+7 , Terrace floor (9 Stops/9
Landings)
Laisoning charges of all above lifts required documentation along with drawings and PWD regulations, including the all gov
compliance.
SITC OF DUMBWAITER DUCT SIZE - 1200 X 1200 MM
for 150 Kg capacity having speed of 0.5 M/S serving B1+GR+ 7 floor with terrace (13 stops) and 13 openings on same side,
stainless steel 304 gradde cabin and Door panels as per technical specification Including required scaffolding & structural
2.4 steel brackets for erecting lift as per above specification obtaining required all necessary permissions of Lift inspector (IE & L 1 EACH ₹ 8,00,000 ₹ 8,00,000
Dept.) to erect and complete the elevator work, Laisons to operate the elevators including all necessary charges, payments
for the same etc complete. (Belt or rope driven)
Make :- Monarch / Otis / Thyssen Krupp
3 BOOM BARRIER 2 EACH ₹ 3,00,000 ₹ 6,00,000
19 SIGNAGE WORKS ₹ 13,50,000
1 LED SIGNAGE 0.8 METER HEIGHT OG EACH LETTER 3 EACH ₹ 3,00,000 ₹ 9,00,000
2 LED SIGNAGE 1.20 METER HEIGHT OF EACH LETTER 1 EACH ₹ 3,50,000 ₹ 3,50,000
3 DOOR SIGNAGE ON 5 MM ACRYLIC SHEET AS PER THE DESIGN 200 X 300 MM SHEET 100 EACH ₹ 1,000 ₹ 1,00,000

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 1
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. DESCRIPTION QUANTITY UNIT UNIT COST COST TOTAL

20 FIXED FURNITURE WORKS ₹ 6,60,000

1 IN BUILT SEATING 3 EACH ₹ 1,20,000 ₹ 3,60,000
2 HIGH TABLE 1 EACH ₹ 1,00,000 ₹ 1,00,000
3 RECEPTION TABLE 1 EACH ₹ 2,00,000 ₹ 2,00,000
21 LOOSE FURNITURE WORKS ₹ 29,92,487
Director & DY Director Chair
1 3 EACH ₹ 13,125 ₹ 39,374
High Back
2 Visiting Chair Medium Back 9 EACH ₹ 12,806 ₹ 1,15,257
3 High Chair 5 EACH ₹ 5,183 ₹ 25,916
4 Discussion Chair 14 EACH ₹ 4,687 ₹ 65,611
5 Visiting Chair 16 EACH ₹ 2,776 ₹ 44,408
7 Reception Chair 3 EACH ₹ 3,431 ₹ 10,292
8 Working Staff Chair Department Office 57 EACH ₹ 3,431 ₹ 1,95,550
9 Conference Chair 16 EACH ₹ 9,825 ₹ 1,57,206
10 OPD / Deparment Head Chair 16 EACH ₹ 6,188 ₹ 99,008
L Shaped Table with 25 MM Plywood Top
11 6 EACH ₹ 23,877 ₹ 1,43,263
Type 1
L Shaped Table with 25 MM Plywood Top
11 2 EACH ₹ 23,877 ₹ 47,754
Type 2
L Shaped Table with 25 MM Plywood Top
11 2 EACH ₹ 23,877 ₹ 47,754
Type 2
Working Station
12 14 EACH ₹ 11,250 ₹ 1,57,503
Type 1
Working Station
12 28 EACH ₹ 11,250 ₹ 3,15,006
Type 2
Working Station
12 16 EACH ₹ 11,250 ₹ 1,80,003
Type 3
Working Station
12 3 EACH ₹ 11,250 ₹ 33,751
Type 4
13 STOOL 15 EACH ₹ 5,130 ₹ 76,947
15 Caster Drawer 69 EACH ₹ 8,393 ₹ 5,79,103
16 Side Table 3 EACH ₹ 8,394 ₹ 25,182
17 Center Table 2 EACH ₹ 16,788 ₹ 33,576
18 Discussion Table 4 EACH ₹ 3,751 ₹ 15,002
19 Low Stool 7 EACH ₹ 5,595 ₹ 39,166
20 Arm Chair 14 EACH ₹ 23,387 ₹ 3,27,418
21 Conference Table 1 EACH ₹ 32,500 ₹ 32,500
22 Meeting Table 1 EACH ₹ 32,500 ₹ 32,500
23 Racks 5 EACH ₹ 5,876 ₹ 29,380
24 Lockers 4 EACH ₹ 10,539 ₹ 42,156
25 OPD Visiting Chair 14 EACH ₹ 5,850 ₹ 81,900

05-10-2024 2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085 2
3C: BILL OF QUANTITIES WITH GENERAL
SPECIFICATIONS
(PHE WORKS)

Page 249 of 316

 YRG CARE
CHENNAI
TAMIL NADU

Summary Sheet - Plumbing Work

Sr. No. Scope Description Cost Total
A INTERNAL SANITARY FIXTURES & FITTINGS ₹ 24,06,475
B DRAINAGE (SOIL, WASTE & VENT ) ₹ 7,10,350
C WATER SUPPLY ₹ 16,05,525
D STORM WATER ₹ 5,89,550
E INFRA PLUMBING ₹ 16,80,000
SUB TOTAL ₹ 69,91,900
Design Contingency ₹ 3,49,595
TOTAL ₹ 73,41,495

A Exclusions:
1 GST.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
A. INTERNAL SANITARY FIXTURES & FITTINGS
Fixing, testing and commissioning of Wall Mounted type Glazed
Vitreous Chinaware European Water Closet Pan, PVC Anti-microbial
seat cover, i-Flush 20mm Concealed Body with
Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe
1 Connection Set for Wall Hung WC (without Exposed 23 No. ₹ 21,500 ₹ 4,94,500 ₹ 4,500 ₹ 1,03,500 ₹ 5,98,000
Actuation Plate Kit) including, Spring & Bolt Set, SWR PVC Self-fit
pipe/bend, including cutting, grooving, making good the walls etc.
complete as per drawings, specifications and direction of the
engineer-in-charge.

Fixing, testing and commissioning of Wall Mounted type Glazed

Vitreous Chinaware European Water Closet Pan, PVC Anti-microbial
seat cover, i-Flush 20mm Concealed Body with
Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe
2 Connection Set for Wall Hung WC (without Exposed 7 No. ₹ 24,500 ₹ 1,71,500 ₹ 4,500 ₹ 31,500 ₹ 2,03,000
Actuation Plate Kit) including cutting, grooving, making good the
walls etc.,for holding grab bars for EWC complete as per drawings,
specifications and direction of the engineer-in-charge. (For Handicap
Toilet)
Fixing, testing and commissioning of Wall Mount Hand Wash Basin,
& Sensor Faucet for Wash Basin ( pillar cock), including fixing of C.P.
Waste Coupling and C.P. Bottle Trap, 15mm C.P. threaded Inlet
connections from Angle Stop cock to Basin, fixing of MS brackets,
3 44 No. ₹ 13,000 ₹ 5,72,000 ₹ 2,000 ₹ 88,000 ₹ 6,60,000
including drilling holes in walls, grooving and making good the
damages etc. complete as per the direction of engineer-in-
charge.(15 mm C.P. brass heavy quality angle stop cock and heavy
duty flexible pipe in contractor scope )
Fixing Glazed vitreous Urinal and Flush Valve System including
Sensor Concealed Type Flush Valve for Urinal Complete set with
Installation Box & Control Valve fixing of CP Waste Coupling and CP
4 14 No. ₹ 18,600 ₹ 2,60,400 ₹ 2,500 ₹ 35,000 ₹ 2,95,400
Bottle Trap including fixing of M.S. brackets for the same, including
drilling in walls and making good the damages etc. complete as per
the direction of engineer-in-charge.
Fixing, testing and commissioning of C.P. Wall Divertor with and
Overhead Shower including fixing 230mm long shower arm and
6 1 No. ₹ 5,775 ₹ 5,775 ₹ 2,000 ₹ 2,000 ₹ 7,775
Wall Flange along with fixing of all necessary fittings, etc. complete
as per direction of engineer-in-charge.
Fixing, testing and commissioning of Stainless Steel Kitchen Sink
(Single bowl without drain board) supported by , wall mounted sink
cock along with fixing of C.P. Waste Coupling, flexible pipe up to
7 11 No. ₹ 10,500 ₹ 1,15,500 ₹ 2,500 ₹ 27,500 ₹ 1,43,000
trap including all necessary fittings etc complete as per direction of
engineer-in- charge. (Flexible PVC pipe in contractor scope .)(In
Labs+pantry)
Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Fixing, testing and commissioning of Health faucet with flexible

8 30 No. ₹ 900 ₹ 1,35,000 ₹ 200 ₹ 6,000 ₹ 1,41,000
pipe 1.5 m long, wall hooked complete as required.
Fixing, testing and commissioning of 15 mm dia CP brass 2-way
9 30 No ₹ 1,200 ₹ 1,80,000 ₹ 200 ₹ 6,000 ₹ 1,86,000
short body bib cock with CP wall flange of approved quality
Fixing, testing and commissioning of 15mm dia. C.P Bib cock with
10 complete as per direction of engineer-in-charge. 18 No ₹ 1,050 ₹ 18,900 ₹ 200 ₹ 3,600 ₹ 22,500
(Drinking water Tap+Taps for shower)
Fixing, testing and commissioning of C.P. Angle Stop Cock with C.P.
11 wall flange including fixing of 600 mm long flexble tube etc 44 No ₹ 1,025 ₹ 45,100 ₹ 200 ₹ 8,800 ₹ 53,900
complete as per direction of engineer-in-charge.
Fixing of approved make C.P. Brass towel ring and fixed on to wall
12 by using CP brass counter sunk screws etc., complete as per 44 No ₹ 675 ₹ 29,700 ₹ 150 ₹ 6,600 ₹ 36,300
specifications.
Fixing C.P. Toilet Roll Holder etc. complete as per directions of the
13 30 No. ₹ 700 ₹ 21,000 ₹ 150 ₹ 4,500 ₹ 25,500
engineer-in-charge.
Fixing C.P. Soap Dispenser Holder etc. complete as per directions of
14 44 No. ₹ 625 ₹ 27,500 ₹ 150 ₹ 6,600 ₹ 34,100
the engineer-in-charge.
T1 TOTAL FOR INTERNAL SANITARY FIXTURES & FITTINGS ₹ 20,76,875 ₹ 3,29,600 ₹ 24,06,475
B. DRAINAGE (SOIL, WASTE & VENT )
Supply, installation, testing & commissioning of PVC SWR (Grade B)
Soil of Dia. 110 mm / waste of Dia 75mm pipe as per IS 13592. Pipes
may be laid / fixed below floors, under slung from ceiling with
necessary cutting to be done to the required length including short
pieces, assorted fittings such as plug/plain tee, bend, single/double
1
Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber
rings, clamping on wall using PVC pipe clips and giving water-
tightness test for the pipes along with making holes in walls/floor
grooving and redoing the same and brick support etc. complete as
per directions of engineer-in-charge.
1.1 75 mm dia (Grade B) 80 Rmtr ₹ 300 ₹ 24,000 ₹ 200 ₹ 16,000 ₹ 40,000
1.2 110 mm dia (Grade B) 40 Rmtr ₹ 350 ₹ 14,000 ₹ 200 ₹ 8,000 ₹ 22,000
Supply, installation, testing & commissioning of PVC SWR (Grade B)
pipe as per IS 13592, of approved make vertically in shaft, necessary
cutting to the required length including short pieces, assorted
fittings such as plain tee and bend single/ double Y, offsets etc. as
2 per IS 14735, jointing with solvent cement & rubber rings, clamping
on wall using PVC pipe clips and giving water-tightness test for the
pipes along with making holes in walls/floor grooving and redoing
the same and brick support etc. complete as per directions of
engineer-in-charge.
2.1 75 mm dia (Grade B) 210 Rmtr ₹ 300 ₹ 63,000 ₹ 200 ₹ 42,000 ₹ 1,05,000
2.2 110 mm dia (Grade B) 105 Rmtr ₹ 350 ₹ 36,750 ₹ 200 ₹ 21,000 ₹ 57,750
2.3 160 mm dia (Grade B) 30 Rmtr ₹ 850 ₹ 25,500 ₹ 200 ₹ 6,000 ₹ 31,500
2.4 200 mm dia (Grade B) 10 Rmtr ₹ 1,550 ₹ 15,500 ₹ 350 ₹ 3,500 ₹ 19,000

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Supply, installation, testing & commissioning of uPVC pipes as per IS

4985 of approved makes, concealed / exposed on walls of following
3 diameters for anti-siphonage/Waste pipe with required fittings and
jointing material etc. complete, as per directions of engineer-in-
charge.
3.1 40mm dia (Pipe Class III - 6 kg / sq.cm) 150 Rmtr ₹ 220 ₹ 33,000 ₹ 200 ₹ 30,000 ₹ 63,000
3.2 50mm dia (Pipe Class III - 6 kg / sq.cm) 35 Rmtr ₹ 300 ₹ 10,500 ₹ 200 ₹ 7,000 ₹ 17,500

Supply, installation, testing & commissioning of uPVC pipes as per IS

4985 of approved makes, Vertically in shafts of following diameters
4 with required fittings and jointing material & PVC supports for the
exposed pipes in the shaft and labor etc. complete, as per directions
of engineer-in-charge.
4.1 65mm dia (Pipe Class III - 6 kg / sq.cm) (anti-siphonage) 90 Rmtr ₹ 450 ₹ 40,500 ₹ 200 ₹ 18,000 ₹ 58,500
Supply, installation, testing & commissioning of 110mm PVC Multi
5 floor Trap as per IS 14735, with material and labour etc. complete as 52 No. ₹ 475 ₹ 24,700 ₹ 200 ₹ 10,400 ₹ 35,100
per directions of engineer-in-charge.
Supply & installation of Stainless Steel Grating for floor trap square
including frame(150mmX150mm) and fixing on tiles, including
6 52 No. ₹ 150 ₹ 7,800 ₹ 150 ₹ 7,800 ₹ 15,600
water proofing of the trap etc.complete as per direction of engineer-
in-charge.
Constructing Gully Traps/ Inspection Chambers of following size in
first class BB masonry works in 1:6 cement mortar including
excavation, laying cement concrete bedding of 150 mm thick of
1:3:6 for foundation and bedding and projecting 100 mm outside
7 the brick wall, providing 20mm thick cement plaster (1:3) from
inside with cement punning (Ghotai), 1:3 cement mortar from
outside & finished rough, benching of 1:2:4 CC to be provided and
fixing air tight FRP covers including curing etc.complete as per
direction of engineer-in-charge.
7.1 300 x 300mm (Gully trap) 1 No. ₹ 5,500 ₹ 5,500 ₹ 5,000 ₹ 5,000 ₹ 10,500
7.2 450 x 900mm (upto 1.2m depth) 4 No. ₹ 12,000 ₹ 48,000 ₹ 7,500 ₹ 30,000 ₹ 78,000
Providing & laying including all necessary excavation in all strata,
supply of labour for lowering, jointing RCC NP 3 class pipes
conforming to IS:458 from Ground upto external drain including
necessary ramming of subgrade after excavation to achieve a
designed gradient & alignment by site rails & boning rods for proper
9
leveling & making the joints water-tight with cement mortor 1:1
joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement
on all sides throughout length, excavation in all types of soils,
refilling, curing etc. complete as per directions of engineer-in-charge
including dewatering wherever necessary.
9.1 300mm Dia 20 Rmtr ₹ 475 ₹ 9,500 ₹ 250 ₹ 5,000 ₹ 14,500

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Supply, installation, testing & commissioning of Gebrit PE Pipe as

per IS standerds, of approved make vertically in shaft, necessary
cutting to the required length including short pieces, assorted
fittings such as plain tee and bend single/ double Y, offsets etc. as
10
per IS , jointing , clamping on wall using pipe clips,chilly clamps and
giving water-tightness test for the pipes along with making holes in
walls/floor grooving and redoing the same and brick support etc.
complete as per directions of engineer-in-charge.(For BSL II +III Lab
2.1 75 mm dia 220 Rmtr ₹ 300 ₹ 66,000 ₹ 200 ₹ 44,000 ₹ 1,10,000
Supply, installation, testing & commissioning of Gebrit Floor Drain
11 110mm floor Trap , with material and labour etc. complete as per 12 No. ₹ 2,500 ₹ 30,000 ₹ 200 ₹ 2,400 ₹ 32,400
directions of engineer-in-charge.
TOTAL FOR DRAINAGE
T2 ₹ 4,54,250 ₹ 2,56,100 ₹ 7,10,350
(SOIL, WASTE & VENT )
C WATER SUPPLY
Supply, installation, testing & commissioning of exposed on wall
faces, floor, shaft & Terrace following sizes of Lead Free Solvent
Weld Schedule 40 PVC Pipes conforming to ASTM D 1785 for water
supply including provision of all fittings such as elbows, Tees,
unions, reducers etc. as per ASTM D 2467, cutting of pipes, jointing
1
with solvent cement joints as per manufacturers specifications,
hydraulic testing, including holes in walls, slabs etc. provision of GI
Brackets & Clamps and making good the damages by bringing them
to good original condition, etc. complete as directed by the engineer-
in-charge.
1.1 80 mm dia 30 Rmtr ₹ 2,300 ₹ 69,000 ₹ 175 ₹ 5,250 ₹ 74,250
1.2 65 mm dia 30 Rmtr ₹ 1,700 ₹ 51,000 ₹ 150 ₹ 4,500 ₹ 55,500
1.3 50 mm dia 40 Rmtr ₹ 1,000 ₹ 40,000 ₹ 125 ₹ 5,000 ₹ 45,000
1.4 40 mm dia 40 Rmtr ₹ 570 ₹ 22,800 ₹ 125 ₹ 5,000 ₹ 27,800
1.5 32 mm dia 30 Rmtr ₹ 420 ₹ 12,600 ₹ 125 ₹ 3,750 ₹ 16,350
Supply, installation, testing & commissioning of cPVC pipe of SDR11
including labour following sizes, pressure rating conforming to
ASTM D-2846 for water supply including all types of fittings in
provided grooves, equivalent jointing material, including testing and
2
making good to the damages by bringing them to good original
condition and complete in all respects including redoing the plaster
to original condition complete as directed by engineer-in-charge.
(internal Toilet)
2.1 32 mm dia 120 Rmtr ₹ 420 ₹ 50,400 ₹ 125 ₹ 15,000 ₹ 65,400
2.2 25 mm dia 70 Rmtr ₹ 250 ₹ 17,500 ₹ 125 ₹ 8,750 ₹ 26,250
2.3 20 mm dia 150 Rmtr ₹ 160 ₹ 24,000 ₹ 125 ₹ 18,750 ₹ 42,750
Supply, installation, testing & commissioning of cPVC /uPVC Ball
valve (Solvent welded) of following diameter & approved make with
3
material and labour etc complete as per directions of engineer-in-
charge.
3.1 50 mm dia 2 No. ₹
Shreeya 1,200 ₹
Consulting 2,400 ₹ 200 ₹ 400 ₹ 2,800

Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

3.2 40 mm dia 4 No. ₹ 800 ₹ 3,200 ₹ 200 ₹ 800 ₹ 4,000

3.3 32 mm dia 25 No. ₹ 500 ₹ 12,500 ₹ 200 ₹ 5,000 ₹ 17,500
3.4 25 mm dia 5 No. ₹ 235 ₹ 1,175 ₹ 150 ₹ 750 ₹ 1,925
3.5 20 mm dia 42 No. ₹ 175 ₹ 7,350 ₹ 150 ₹ 6,300 ₹ 13,650
Supply, installation, testing & commissioning of Wafer Type
Butterfly Valves with Body of Cast Iron, Disc of Cast Iron/Stainless
Steel and body lining of EPDM/Nitrile Rubber including jointing with
4
Galvanised Iron pipes including hydraulic testing (Operating
pressure not less than 16 Kg/Sq.cm) etc. complete as directed by the
engineer-in-charge.
4.1 80 mm dia 2 No. ₹ 4,200 ₹ 8,400 ₹ 1,500 ₹ 3,000 ₹ 11,400
4.2 65mm dia 2 No. ₹ 3,300 ₹ 6,600 ₹ 1,200 ₹ 2,400 ₹ 9,000
Supply, installation, testing & commissioning of Y Type Strainer with
Body of Cast Iron,and body lining of EPDM/Nitrile Rubber including
5 jointing with Galvanised Iron pipes including hydraulic testing
(Operating pressure not less than 16 Kg/Sq.cm) etc. complete as
directed by the engineer-in-charge.
4.1 80 mm dia 2 No. ₹ 7,500 ₹ 15,000 ₹ 1,500 ₹ 3,000 ₹ 18,000
4.2 65mm dia 2 No. ₹ 5,500 ₹ 11,000 ₹ 1,500 ₹ 3,000 ₹ 14,000
Supply, installation, testing & commissioning of Air Release Valve of
5 15mm dia on top of downtake with ball valve complete with all 2 No. ₹ 1,000 ₹ 2,000 ₹ 500 ₹ 1,000 ₹ 3,000
accessories as required.
Supply, installation, testing & commissioning of cPVC pipe of
SDR13.5 including labour following sizes, pressure rating
conforming to ASTM D-2846 for water supply including all types of
6 fittings in provided grooves, equivalent jointing material, including
testing and making good to the damages by bringing them to good
original condition and complete in all respects including redoing the
plaster to original condition complete as directed by engineer-in-
6.1 50mm 40 Rmtr ₹ 1,200 ₹ 48,000 ₹ 150 ₹ 6,000 ₹ 54,000
Providing and Fixing Heavy Duty Brass Float Valves consisting of
Brass valve, brass stem and copper float ball suitable for the
7 working pressure of the feeding line, including all necessary specials
for connection to the G.I. pipes including hydraulic testing etc.
complete as directed by engineer-in-charge.
7.1 50 mm dia 1 No. ₹ 7,500 ₹ 7,500 ₹ 1,000 ₹ 1,000 ₹ 8,500
Providing & Fixing of water meter with strainer as per approved
make including supply of required specials & isolation valves, hemp
8
yarn etc complete to make it water tight and providing locking
arrangement to the same etc. complete as per directions of
8.1 50 mm dia 2 No. ₹ 12,000 ₹ 24,000 ₹ 1,500 ₹ 3,000 ₹ 27,000
Supply & installation of FRP Manhole Covers with frame,& openable
hindge of 600 mm dia (Light Duty) for OHT including all necessary
9 supports, grouting of the frame in FRP, making arrangements for 2 No. ₹ 4,500 ₹ 9,000 ₹ 1,200 ₹ 2,400 ₹ 11,400
recessed locking of the Manhole cover etc. complete as directed by
engineer-in-charge. Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Providing, Fixing & commissioning of approved make level control

10 switch to trasmit the high and low level of underground water tank 1 No. ₹ 5,500 ₹ 5,500 ₹ 1,200 ₹ 1,200 ₹ 6,700
to BMS, Same need to install as per direction of engineer-in-charge.
Providing, Fixing & commissioning of approved make 500lph
Capacity RO water purifying system with DM Plant at terrace floor
11 1 No. ₹ 2,50,000 ₹ 2,50,000 ₹ 25,000 ₹ 25,000 ₹ 2,75,000
with water PVC storage tank of 5KL capacity , Same need to install
as per direction of engineer-in-charge.
Providing, Fixing & commissioning of approved make SS Water
12 Cooler 150Ltr Capacity with other accessories valves,internal 7 No. ₹ 30,000 ₹ 2,10,000 ₹ 1,500 ₹ 10,500 ₹ 2,20,500
plumbing Same need to install as per direction of engineer-in-
Providing and fixing Stainless Steel pipes Make- Viega Sanpress
Inox confirming to EN 10312 Material No.1.4401(X5 CrNiMo 17-12-
2) with 2.3% Mo(S.S.Grade-316), complete with Press Type
fittings Make- Viega Sanpress Inox Material No.1.4401 suitable
for doubley secure pressing (two pressings simultaneously– one in
front of the crimp and one behind it) for torsion proof and
longtitudinally forcelocked connection.with Black;EPDM Sealing
13 Element with SC-Contur in accordance with DVGW regulation
W534, DW 8501 BL 0551, DW 8511 BQ 0245) for Cold water
supply capable to withstand temprature up to 90 degree
centrigrade and working pressure 16 bar, such as sockets, bends,
elbows, tees, reducers, unions,Flanges etc. necessary adapters
for GI/Copper and CP fittings.Clamps with hanger at a
spacing as required, jointing, sundries,cutting holes in
walls/floors/slabs & making good complete.(For DM Water
13.1 35 mm dia 20 No. ₹ 2,500 ₹ 50,000 ₹ 450 ₹ 9,000 ₹ 59,000
13.2 28 mm dia 70 No. ₹ 2,250 ₹ 1,57,500 ₹ 450 ₹ 31,500 ₹ 1,89,000
13.3 22 mm dia 100 No. ₹ 1,950 ₹ 1,95,000 ₹ 350 ₹ 35,000 ₹ 2,30,000
Supply & fixing, Crimping SS Ball valve with all required accessories
14
& jointing material.(For DM Water Supply)
14.1 35 mm dia 1 No. ₹ 6,200 ₹ 6,200 ₹ 350 ₹ 350 ₹ 6,550
14.2 28 mm dia 2 No. ₹ 5,500 ₹ 11,000 ₹ 350 ₹ 700 ₹ 11,700
14.3 22 mm dia 12 No. ₹ 4,500 ₹ 54,000 ₹ 300 ₹ 3,600 ₹ 57,600
T3 TOTAL FOR WATER SUPPLY ₹ 13,84,625 ₹ 2,20,900 ₹ 16,05,525
D. STORM WATER
Supply, installation, testing & commissioning of PVC SWR pipe as
per IS 13592 laid in floor and exposed faces of duct walls with
necessary cutting to be done to the required length including short
pieces, assorted fittings such as plug/plain tee, bend, single/double
1 Y, offsets etc. as per IS 14735, jointing with solvent cement & rubber
rings, clamping on wall using PVC pipe clips and giving water-
tightness test for the pipes laid in the sunken portion along with
making holes in walls/floor grooving and redoing the same and brick
support etc. complete as per directions of engineer-in-charge.
1.1 75 mm dia (Grade B) 30 Rmtr ₹ 300 ₹ 9,000 ₹ 150 ₹ 4,500 ₹ 13,500
1.2 110 mm dia (Grade B) 60 Rmtr ₹
Shreeya 350 ₹
Consulting 21,000 ₹ 150 ₹ 9,000 ₹ 30,000

Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Providing and fixing C. I. vertical jalli at the collection point of RWP

on terrace to be with material and labour including provision of lead
2
sheet flashing of 6mm thickness as per details etc. complete as per
directions of engineer-in-charge.
2.1 Size 100 mm x 100 mm 2 No. ₹ 250 ₹ 500 ₹ 150 ₹ 300 ₹ 800
Construction of Catch Pits of size as below for collecting landscape
and surface water of following depth in first class B.B. Masonry in
C.M. 1:6 including excavation, laying PCC (1:4:8) bedding 200 mm
thickr foundation and bedding projecting 75mm, providing 20mm
3
thick cement plaster (1:3) from inside & outside and Pre-cast factory
manufactured C.I/D.I/M.S perforated cover (as approved by client)
with frame (medium class) all complete as per drawings,
specifications and directions of the engineer-in-charge.
3.1 600 x 600 mm 10 Nos ₹ 20,000 ₹ 2,00,000 ₹ 7,500 ₹ 75,000 ₹ 2,75,000
Providing & laying including all necessary excavation in all strata,
supply of labour for lowering, jointing RCC NP 3 class pipes
conforming to IS:458 from Ground upto external drain including
necessary ramming of subgrade after excavation to achieve a
designed gradient & alignment by site rails & boning rods for proper
4
leveling & making the joints water-tight with cement mortor 1:1
joints hemp yarn including 6" thick 1:3:6 C.C. bedding & encasement
on all sides throughout length, excavation in all types of soils,
refilling, curing etc. complete as per directions of engineer-in-charge
including dewatering wherever necessary.
4.1 300mm Dia 90 Rmtr ₹ 475 ₹ 42,750 ₹ 250 ₹ 22,500 ₹ 65,250
Constructing Rain water Harvesting Sedimenation Catch pits as per
detailed drawing for harvesting of the rain water in first class B.B.
Masonry work in C.M. 1:6 including excavation, Sand, Gravel &
Boulder Bedding of 500 mm depth as per drawing, providing 20mm
5 thick cement plaster (1:3) from inside & outside and Hot Dipped
Galvanized FRP perforated cover with frame (designed for AA traffic
load) including fixing C.I. steps 300 mm c/c, benching in 1:2:4 C.M.
and finishing with cement punning etc all complete as per drawings,
specifications and directions of the engineer-in-charge.
5.1 2.00X1.00m with deprt 2.00m 1 Nos ₹ 55,000 ₹ 55,000 ₹ 25,000 ₹ 25,000 ₹ 80,000
Drilling of 6" diameter Bores suitable for recharging ground water
(Rainwater Harvesting) at suitable locations and upto the 65-90 m
6
depth of the natural ground water table including provision of M.S.
casing pipe of 8" diameter up to a depth of 20' below ground level..
6.1 150mm dia, upto 65-90 m depth 1 Nos ₹ 1,00,000 ₹ 1,00,000 ₹ 25,000 ₹ 25,000 ₹ 1,25,000
T4 TOTAL FOR STORM WATER ₹ 4,28,250 ₹ 1,61,300 ₹ 5,89,550
E INFRA PLUMBING BOQ
Constructing 40KLD STP & 5KL ETP RCC Tanks with supply &
1 istalation of MBBR technology STP plant etc. complete as per 1 Set ₹ 11,00,000 ₹ 11,00,000 ₹ - ₹ - ₹ 11,00,000
direction of engineer-in-charge
Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Water Transfer Pumps Supply, Installation, Testing & Commissioning

of water transfer mono block pumps with control panel 3Phase 440
volts/50cycles per second with TEFC induction motor SS 410shaft,
bronze impeller and mechanical seal of the following
capacity.Providing and fixing domestic water transfer pumps for
pumping the water from UG tank to Overhead tanks with solonoid
valve, LL & HL sensor and 25 rmgt control cabling. Electrical Starter
panels complete with O/L Relay with Single phasing preventer
2 1 Set ₹ 1,50,000 ₹ 1,50,000 ₹ 35,000 ₹ 35,000 ₹ 1,85,000
feature, 3 phase reversal preventer, earth leakage relay, ON-OFF
and Trip Indicating lamps, contactors contacts for electrical panel,
working / standby slelction, etc. suitable for the motor H.P. as
specified below and with provision for remote P.B. on/off complete
as required.Electrical contractor will terminate the power in pump
starter panel. Cost of power cabling from starter panel to pump to
be considered by plumbing contractor.Domestic water UGT to OHT
Water Supply(1W+1ST)
Pressure Hydro-booster System for domestic water supply for top 2
Floors : Compact self contained Hydro-booster system comprising of
following :Horizontall multistage centrifugal booster pumps with SS-
304 casing, S.S 304 impeller and SS AISI 410 shaft, C.I. Base CED
coating & head TEFC motor (with mechanical seal) Vendor to submit
performance curves and technical catalogue of the proposed model
for review and information.Panel mounted microprocessor multi
pump contoller with large graphical display with VGA 240 x 320
3 pixels and variable frequency drive (VFD) integrated in a single body 1 Set ₹ 1,50,000 ₹ 1,50,000 ₹ 35,000 ₹ 35,000 ₹ 1,85,000
or as separate components with pressure sensor transmitter (one
dedicated to each pump), diodes to indicate pump ready, pump
running and fault and capable to communicate with other
controllers following MODBUS-RTU or BACNET Class-2 protocol
through RS485 port. System should be capable to compensate for
frictional losses at lower flows. All alarms should be displayed in the
controller. System should be equipped with dry running protection.
(1W+1SB)(200LPM@15mtr head)
Pre-charged diaphragm pressure vessel with interchangeable
membrane, charging connection, connected to outlet header with
necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete
(size of pressure vessel shall be 100 liters (approx.) or as per
manufacturer recommendation). 100 Ltrs HPN tank 10 Bar rating for
domestic & 50/60 Ltrs HPN tank 10 Bar rating for flushing.
Set of accessories such as CPVC headers for suction and discharge,
control valves, non return valves, pressure switches, pressure
transducers, pressure gauge, inter connecting power and control
cabling etc. complete.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Pressure Hydro-booster System for DM water supply for top 2

Floors : Compact self contained Hydro-booster system comprising of
following :Horizontall multistage centrifugal booster pumps with SS-
304 casing, S.S 304 impeller and SS AISI 410 shaft, C.I. Base CED
coating & head TEFC motor (with mechanical seal) Vendor to submit
performance curves and technical catalogue of the proposed model
for review and information.Panel mounted microprocessor multi
pump contoller with large graphical display with VGA 240 x 320
4 pixels and variable frequency drive (VFD) integrated in a single body 1 Set ₹ 1,75,000 ₹ 1,75,000 ₹ 35,000 ₹ 35,000 ₹ 2,10,000
or as separate components with pressure sensor transmitter (one
dedicated to each pump), diodes to indicate pump ready, pump
running and fault and capable to communicate with other
controllers following MODBUS-RTU or BACNET Class-2 protocol
through RS485 port. System should be capable to compensate for
frictional losses at lower flows. All alarms should be displayed in the
controller. System should be equipped with dry running protection.
(1W+1SB)(100LPM@15mtr head)
Pre-charged diaphragm pressure vessel with interchangeable
membrane, charging connection, connected to outlet header with
necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete
(size of pressure vessel shall be 100 liters (approx.) or as per
manufacturer recommendation). 100 Ltrs HPN tank 10 Bar rating for
domestic & 50/60 Ltrs HPN tank 10 Bar rating for flushing.
Set of accessories such as SS headers for suction and discharge,
control valves, non return valves, pressure switches, pressure
transducers, pressure gauge, inter connecting power and control
cabling etc. complete.
T5 INFRA GRAND TOTAL ₹ 15,75,000 ₹ 1,05,000 ₹ 16,80,000
GRAND TOTAL ₹ 59,19,000 ₹ 10,72,900 ₹ 69,91,900

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
4A. BILL OF QUANTITIES WITH GENERAL
SPECIFCATIONS
(FIRE FIGHTING WORKS)

Page 307 of 316

 YRG CARE
CHENNAI
TAMIL NADU

Summary Sheet - Fire Fighting Work

Sr. No. Scope Description Cost Total
A INTERNAL HYDRANT SYSTEM ₹ 5,01,150
B FIRE EXTINGUISHERS ₹ 48,850
C SINAGES ₹ 25,200
D EXTERNAL HYDRANT SYSTEM ₹ 16,59,100
E AUTOMATIC SPRINKLER SYSTEM ₹ 13,72,100
F FIRE DETECTION AND ALARM SYSTEM ₹ 16,04,784
SUB TOTAL ₹ 52,11,184
Design Contingency ₹ 2,60,559
TOTAL ₹ 54,71,743

A Exclusions:
1 GST.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
A. INTERNAL HYDRANT SYSTEM
Supplying, installing, testing and commissioning of 'C' class M.S. pipes of to
confirm IS 1239 upto dia 150mm malleable specials extruded type, such as
Reducers, elbows, Tees, flanges etc. The pipes shall be painted, after total removal
of rust, with One coat each of Epoxy primer & Paint (Red) using approved type,
Galvanized, supports at standard spacing, anchor fasteners, bolts, nuts, clamps,
1
rails "U" & threaded bolt, Including cutting, Welding, fixing in / on walls, Floors &
ceiling by using the supports etc, as per drawings. The quoted rate shall also
include for chasing / chipping walls, making holes in walls / floor and making them
good with non shrink filler material / RCC/ blocks as required and finished in
cement mortar etc. complete.(Above ground piping)
1.1 150 mm nominal dia 50 Rmt ₹ 2,500 ₹ 1,25,000 ₹ 750 ₹ 37,500 ₹ 1,62,500
1.2 25 mm nominal dia 10 Rmt ₹ 500 ₹ 5,000 ₹ 150 ₹ 1,500 ₹ 6,500
Providing & fixing full way lever operated forged brass ball valve of brass body
with forged brass hard chrome-plated steel ball tested to a pressure not less than
2
16 Kg / sq.cm with threaded / flanged joints complete with nuts, bolts, gaskets,
washers etc.
2.1 25 mm dia 8 Nos. ₹ 1,200 ₹ 9,600 ₹ 350 ₹ 2,800 ₹ 12,400
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 (
3.0 PN 16) slim seal standard lever operated type with required flanges, nuts, bolts
etc. complete.
3.1 150mm nominal dia 1 Nos. ₹ 4,500 ₹ 4,500 ₹ 350 ₹ 350 ₹ 4,850
Supply, installation, testing & commissioning of Landing Hydrants comprising of
4.0 the following in the Fire duct, All the hydrant accessories shall be given serial
number for identification,numbers hall be written in the white paint
Single headed hydrant valve as per IS 5290, made of Stainless Steel with 63 mm
dia instantaneous outlet of 80 mm dia fanged inlet ,Blank caps , chain and hand
4.1 8 Nos. ₹ 5,800 ₹ 46,400 ₹ 300 ₹ 2,400 ₹ 48,800
wheels etc complete. with Orifice plate (6MM THK) as required to minimize the
pressure at discharge.
2 lengths of 15 M long, 63mm dia RRL hose with instantaneous couplings and
4.2 Hoses shall be stored in side the hose cabinet with Bracket and required 8 Set. ₹ 5,500 ₹ 44,000 ₹ 200 ₹ 1,600 ₹ 45,600
accessories.SS coupling
4.3 1 no. Stainless Steel 304 short branch pipe of 63 mm dia. with nozzle. 8 Set. ₹ 2,200 ₹ 17,600 ₹ 200 ₹ 1,600 ₹ 19,200
Hose reel drum of swinging type with 19mm dia Rubber braided hose of 36 M.
4.4 8 Nos. ₹ 9,000 ₹ 72,000 ₹ 350 ₹ 2,800 ₹ 74,800
length and Shut off nozzle, complete.
5 Booster pump
Supplying, installing, testing and commissioning of electrical monoblock booster
pump of capacity 900 Lt/min against a head of 35 m to get a pressure of 3.5
kg/sq.cm at the topmost hydrant with booster starter with M.S. frame and
clamps as necessary for fixing the pumps on the top of slab as per site conditions 1 Nos. ₹ 75,000 ₹ 75,000 ₹ 5,000 ₹ 5,000 ₹ 80,000
and instructions of site engineer in charge including strainer, sluice valve, non
return valve, butterfly valve & pressure guage etc. including complete on/off push
button provision on ground with necessary wiring etc.
Supply, installation, testing & commissioning of Pressure switches of suitable
6 2 Nos. ₹ 3,500 ₹ 7,000 ₹ 350 ₹ 700 ₹ 7,700
range for pump sets with fittings like unions / collars / reducers etc.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
Supply, installation, testing & commissioning of Pressure gauges of Dial size
150mm dia of suitable range for pump sets and pipe lines with siphon, fittings like
7 2 Nos. ₹ 4,800 ₹ 9,600 ₹ 350 ₹ 700 ₹ 10,300
unions / collars / reducers etc. Glycerine filled pressure gauges to use on pump
discharge lines.
Supplying, installing, testing and commissioning of C.I. Non-return valves as per
8 IS:5312 (PN 16) swing check type with required flanges, nuts, bolts and gaskets
etc. complete.
8.1 100mm nominal dia 1 Nos. ₹ 3,600 ₹ 3,600 ₹ 350 ₹ 350 ₹ 3,950
Supplying, installing testing and commisioning of CI flanged "Y" type strainer with
9 SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete as per technical Nos.
specifications.
9.1 100mm nominal dia 1 Nos. ₹ 15,500 ₹ 15,500 ₹ 350 ₹ 350 ₹ 15,850
Supplying installation testing and commissioning of MS Air Release Valve of
25mm dia of approved make on the top of each 150 / 100 mm dia hydrant riser as
10 1 Nos. ₹ 8,500 ₹ 8,500 ₹ 200 ₹ 200 ₹ 8,700
per standard fire practice with necessary cut off & accessories as per instruction
and drainage arrangement to release water hammers & air locks
T1 TOTAL FOR INTERNAL HYDRANT SYSTEM ₹ 4,43,300 ₹ 57,850 ₹ 5,01,150
B. FIRE EXTINGUISHERS
1 Supplying & installing of Portable Fire extinguishers of following type & capacity.
ISI marked (IS:15683:2006 )ABC type fire extinguisher of 6Kgs. Capacity, with initial
filling in brand new cylinder with powder coated finish, fitted with Gun metal
1.1 8 Nos. ₹ 2,300 ₹ 18,400 ₹ 200 ₹ 1,600 ₹ 20,000
union, discharge hose, wall mounting bracket/Floor tralley and suitable sinages
etc. complete, confirming to IS
ISI marked (IS:15683:2006 )ABC type fire extinguisher of 10Kgs. Capacity, with
initial filling in brand new cylinder with powder coated finish, fitted with Gun
1.2 1 Nos. ₹ 2,600 ₹ 2,600 ₹ 350 ₹ 350 ₹ 2,950
metal union, discharge hose, wall mounting bracket and suitable sinages etc.
complete, confirming to IS
Mechanical Foam stored pressure trolley mounted extinguisher Capacity 50 Liters,
1.3 1 Nos. ₹ 16,000 ₹ 16,000 ₹ 350 ₹ 350 ₹ 16,350
Confirming to (IS:15683:2006)complete in all respects.
Set of 2 fire buckets (FILLED WITH SAND) round bottom type enamel painted,
1.4 white inside & Red out side and Letter "FIRE" in black out side and handle with 1 Set ₹ 2,500 ₹ 2,500 ₹ 200 ₹ 200 ₹ 2,700
mounting bracket complete conforming to IS:2546.
1.5 Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets. 1 Nos. ₹ 6,500 ₹ 6,500 ₹ 350 ₹ 350 ₹ 6,850
T2 TOTAL FOR FIRE EXTINGUISHERS ₹ 46,000 ₹ 2,850 ₹ 48,850
C. SINAGES
Providing ,fixing of in position the following type of sign boards made out of 3mm
1 thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self
adhesive vinyle painted foam board, complete with mirror fasteners.
Signage with printed "IN CASE OF FIRE, USE STAIRS" of 1.5cm height letters in red
1.1 with white back ground. The size of the board shall be 25cm x 30 cm and shall be 16 Nos. ₹ 250 ₹ 4,000 ₹ 100 ₹ 1,600 ₹ 5,600
fixed at the height of 2 mts. from finished floor near Manual call points.
Fire exit signage at each entry of staircase on every floor, indicating the direction
1.2 of fire exit words and direction arrow, lettering size shall be 7.5 cm with 16 Nos. ₹ 250 ₹ 4,000 ₹ 100 ₹ 1,600 ₹ 5,600
contrasting color from back ground. Size shall be 15cm x 60cm.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
Floor identification signage at each stair enclosure on every floor, indicating the
1.3 floor number in words, lettering size shall be 7.5 cm with contrasting color from 16 Nos. ₹ 250 ₹ 4,000 ₹ 100 ₹ 1,600 ₹ 5,600
back ground. Size shall be 15cm x 60cm.
Lift identification signage at each lift lobby at every floor, indicating the "FIRE LIFT"
1.4 in words, lettering size shall be 7.5 cm with contrasting color from back ground. 16 Nos. ₹ 250 ₹ 4,000 ₹ 100 ₹ 1,600 ₹ 5,600
Size shall be 15cm x 60cm.
identification signage at each FHC, indicating the "FIRE HOSE CABINET" in words,
1.5 lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 8 Nos. ₹ 250 ₹ 2,000 ₹ 100 ₹ 800 ₹ 2,800
15cm x 60cm.
T3 TOTAL FOR SINAGES ₹ 18,000 ₹ 7,200 ₹ 25,200
D. EXTERNAL HYDRANT SYSTEM
1 MAIN PUMP
Supply, erection, testing & commissioning of electrical motor driven main pump of
Horizontal In Line Type and capable to deliver 2280 LPM against head of 95 M .
Fire pump shall have C.I. casing, bronze impeller (hard finished and dynamically
balanced) and S.S. (304) Shaft with mechanical seal. The installation shall be 1 Nos. ₹ 2,00,000 ₹ 2,00,000 ₹ 25,000 ₹ 25,000 ₹ 2,25,000
complete with necessary pressure gauge with gun metal shut off cock on delivery
side. (The pump should be tested for bench mark at factory and shall be gotten
approved by the Local fire Authority). (Pump capacity as per CFO NOC received)
The pump shall be coupled to Squirrel cage induction motor, TEFC type suitable for
operation on 415 volts, 3 phase 50 HZ A.C supply, for the above pump with
synchronous speed of 2900 RPM, conforming to IP 55 protection & class F
insulation. The motor shall conform to IS 325-1978 (up to date) and complete set
shall mounted on common base frame. The quoted rate shall includes providing &
fixing of coupling, coupling gaurd and Vibration isolator,flexible couplings ,RCC
foundation( as recommended by manufacturer) and Foundation bolts etc. Pump
shall be capable of furnishing not less than 150% of rated capacity at a head of not
less than 65% of the rated head. The shut off head shall not exceed 120% of rated
head.
2 STANDBY DIESEL ENGINE PUMP
Supply, installation, testing & commissioning of Diesel Engine driven centrifugal
stand by pump, capable of delivering 2280 LPM against head of 95 M (to ensure a
minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant /2.5
Kg/Sqcm at the farthest or topmost sprinkler). Fire pump shall have C.I. casing,
CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. 1 Nos. ₹ 5,55,000 ₹ 5,55,000 ₹ 25,000 ₹ 25,000 ₹ 5,80,000
(304) Shaft with mechanical seal. The installation shall be complete with
necessary pressure gauge with gun metal shut off cock on delivery side. (The pump
should be tested for bench mark at factory and shall be gotten approved by the
Local fire Authority)

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
The pump shall coupled to suitable HP of Diesel engine radiator water cooled type
with speed of 1500 RPM and complete set shall be mounted on common base
frame. Batteries & battery leads with stand, Fuel tank ( for 6 Hrs. operation ) with
stand & gauge glass, Fuel piping with valves. The quoted rate shall includes
radiator water cooling piping(if required) coupling gaurd and other standard
accessories,RCC foundation (as recommended by manufacturer) and foundation
bolts, etc. complete. Pump shall be capable of furnishing not less than 150% of
rated capacity at a head of not less than 65% of the rated head. The shut off head
shall not exceed 120% of rated head.heat exchanger with necessary piping
connections & fittings, vibration isolator ,flexible coupling, coupling guard ,flexible
couplings & exhaust pipe connection complete as required.
Supplying, installing, testing and commissioning of 'C' class M.S. pipes of to
confirm IS 1239 upto dia 150mm malleable specials extruded type, such as
Reducers, elbows, Tees, flanges etc... and necessary puddle flanges for tanks. The
pipes shall be painted, after total removal of rust, with One coat each of etching
primer & Paint (Red) using approved type, Galvanized, supports at standard
3
spacing, anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including
cutting, Welding, fixing in / on walls, Floors & ceiling by using the supports etc, as
per drawings. The quoted rate shall also include for chasing / chipping walls,
making holes in walls / floor and making them good with non shrink filler material
/ RCC/ blocks as required and finished in cement mortar etc. complete.(Above
3.1 150mm nominal dia 150 Rmt ₹ 2,500 ₹ 3,75,000 ₹ 750 ₹ 1,12,500 ₹ 4,87,500
3.2 100mm nominal dia 50 Rmt ₹ 1,550 ₹ 77,500 ₹ 650 ₹ 32,500 ₹ 1,10,000
Supplying, installing, testing and commissioning of 'C' class M.S. pipe line
confirming to IS 1239 upto dia 150mm & as per IS 3589 for dia 200mm &
abovemalleable specials extruded type, such as Reducers, elbows, flanges.
necessary puddle flanges for tank connection, laying of pipes in excavated
trenches, proper supports at bottom. ( Excavation, Foundation & refilling)The
4
pipes shall be Two coats of Bituminious primer with Wrapping material of Pipe
coat of IWL make.Wrapping is applied over two coats of anti corrosive rubber
modified bituminous primer of density 0.92 gm/cu cm and viscosity of 500 to 1000
cps applied at 150 gms per Sq.M.
(Under ground piping )
4.1 150mm nominal dia 25 Rmt ₹ 2,800 ₹ 70,000 ₹ 750 ₹ 18,750 ₹ 88,750
4.2 100mm nominal dia 25 Rmt ₹ 1,700 ₹ 42,500 ₹ 650 ₹ 16,250 ₹ 58,750
Supply, installation, testing & commissioning of Butterfly valves of L & T Class 150
Aqua seal plus as per BS 5155 ( PN 16) slim seal standard lever operated type with
5
required flanges, nuts, bolts etc. complete. The valve shall be fitted with
supervisory switches.
5.1 150mm nominal dia 2 Nos ₹ 4,300 ₹ 8,600 ₹ 350 ₹ 700 ₹ 9,300
5.2 100mm nominal dia 1 Nos ₹ 4,100 ₹ 4,100 ₹ 350 ₹ 350 ₹ 4,450

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
Supply, installation, testing & commissioning of fire brigade inlet connection of 4
way with 4 nos. 63 mm dia. built - in S.S Non- return valves, instantaneous
coupling type arranged on 150 mm dia. pipe manifold and connected to External
6 2 Nos. ₹ 12,000 ₹ 24,000 ₹ 350 ₹ 700 ₹ 24,700
Hydrant Ring as well as to the Fire water tank. Quoted rate shall be included with
C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of suitable size with
mounting supports etc. complete.
Supply, installation, testing & commissioning of 3 way Fire Brigade draw off of size
150 mm dia. with 2 No. 63mm (2.1/2") size SS male outlets including metallic
7 1 Nos. ₹ 5,500 ₹ 5,500 ₹ 350 ₹ 350 ₹ 5,850
cover of mild steel and glass front, indicator plates,foot valve as directed by
Architect etc.complete from tank
Supplying, installing, testing and commissioning of yard hydrant comprising of the
8 following.All the hydrant accessories shall be given serial number for
identification,numbers hall be written in the white paint
Single headed hydrant valve as per IS 5290, made of S.S. with 63 mm dia
instantaneous out & 80 mm dia fanged inlet inlet, Blank cap , chain and hand
8.1 4 Nos. ₹ 5,100 ₹ 20,400 ₹ 350 ₹ 1,400 ₹ 21,800
wheel etc complete. with Orifice plate(SS304 6MM THK) as required to minimize
the pressure at discharg.
2 lengths of 15 M long, 63mm dia CP hose with instantaneous male and female
8.2 coupling of Stainless steel and Hoses shall be stored in side the hose cabinet with 4 Nos. ₹ 5,500 ₹ 22,000 ₹ 350 ₹ 1,400 ₹ 23,400
Bracket and required accessories.
8.3 1 no. S.S short branch pipe with nozzle. 4 Nos. ₹ 2,000 ₹ 8,000 ₹ 350 ₹ 1,400 ₹ 9,400
M.S. Hose cabinet stand mounted type fabricated out of M.S. sheet of 16 swg.
with powder coated with P.O red & glass fronted ( 4mm thick glass with rubber
8.4 4 Nos. ₹ 2,200 ₹ 8,800 ₹ 350 ₹ 1,400 ₹ 10,200
beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted
rate shall be includes suitable stand for mounting,
T4 TOTAL FOR EXTERNAL HYDRANT SYSTEM ₹ 14,21,400 ₹ 2,37,700 ₹ 16,59,100
E. AUTOMATIC SPRINKLER SYSTEM
Supplying, installing, testing and commissioning of 'C' class M.S. pipes confirming
to IS 1239, upto dia 150mm & IS 3589 for 200mm & above ,malleable specials
extruded type, such as Reducers, elbows, flanges.The pipes shall be painted with
One coat each of Epoxy primer & Paint (Red) using approved type, Galvanized,
supports at standard spacing, anchor fasteners, bolts, nuts, clamps, rails "U" &
1 threaded bolt, Including cutting, Welding, fixing in / on walls, ceiling by using the
supports etc, as per drawings. The quoted rate shall also include for chasing /
chipping walls, Floors, making bore holes in walls / floor and making them good
with non shrink filler material (as approved by Architect )in bore holes / finished
in cement mortar etc. complete. (Above Ground ) (Forged welded fittings to be
used upto 50mm pipe & malleable fittings above 50mm for welded joints.)
1.1 150mm nominal dia 20 Rmt ₹ 2,500 ₹ 50,000 ₹ 750 ₹ 15,000 ₹ 65,000
1.2 100mm nominal dia 40 Rmt ₹ 1,500 ₹ 60,000 ₹ 375 ₹ 15,000 ₹ 75,000
1.3 80mm nominal dia 50 Rmt ₹ 1,100 ₹ 55,000 ₹ 375 ₹ 18,750 ₹ 73,750
1.4 65mm nominal dia 150 Rmt ₹ 1,050 ₹ 1,57,500 ₹ 325 ₹ 48,750 ₹ 2,06,250
1.5 50mm nominal dia 190 Rmt ₹ 900 ₹ 1,71,000 ₹ 250 ₹ 47,500 ₹ 2,18,500
1.6 40mm nominal dia 90 Rmt ₹ 850 ₹ 76,500 ₹ 225 ₹ 20,250 ₹ 96,750
1.7 32mm nominal dia 90 Rmt ₹ 650 ₹ 58,500 ₹ 200 ₹ 18,000 ₹ 76,500
1.8 25mm nominal dia 400 Rmt ₹ 550 ₹ 2,20,000 ₹ 125 ₹ 50,000 ₹ 2,70,000

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
Supplying, Installing, testing and commissioning of CI butterfly valves ( PN 16) as
2 per BS 5155 slim seal standard lever operated type with required flanges, nuts,
bolts etc. complete.The valve shall be fitted with supervisory switches.
2.1 150mm dia 1 Nos ₹ 4,500 ₹ 4,500 ₹ 500 ₹ 500 ₹ 5,000
2.2 80mm dia 4 Nos ₹ 4,000 ₹ 16,000 ₹ 500 ₹ 2,000 ₹ 18,000
2.3 65 mm dia 4 Nos ₹ 3,200 ₹ 12,800 ₹ 350 ₹ 1,400 ₹ 14,200
Supply, installation, testing & commissioning of forged brass isolation valve of 25
3 8 Nos ₹ 1,050 ₹ 8,400 ₹ 350 ₹ 2,800 ₹ 11,200
mm dia complete as per directions of engineer in charge.
Supplying, installing, testing and commissioning of Standard response chromium
plated brass Sprinkler with quartzoid bulb,15mm screwed end connection of 68
4
deg. C. temperature rating and K factor of 80 and orifice shall not be less than
6mm (if required).
4.1 Pendent sprinkler 260 Nos ₹ 215 ₹ 55,900 ₹ 125 ₹ 32,500 ₹ 88,400
Supply, installation, testing & commissioning of flow switch on sprinkler
5 distribution header on each floor and shall be connected to panel through cable.
Cable / panel shall be measured separately.
5.1 100 mm dia 8 Nos ₹ 7,500 ₹ 60,000 ₹ 500 ₹ 4,000 ₹ 64,000
Supply & fixing of approved type rosette plates ( Recessed type, in two piece) for
7
Sprinklers below false ceiling area.
The Rosette shall be fabricated by M.S. plate of 2mm thick and the finish shall be
7.1 260 Nos ₹ 75 ₹ 19,500 ₹ 75 ₹ 19,500 ₹ 39,000
powder coated and color shall be as approved by architects / clients.
Supplying installation testing and commissioning of MS Air Release Valve of
25mm dia of approved make on the top of each 150mm dia Sprinkler riser as per
8 1 Nos. ₹ 7,500 ₹ 7,500 ₹ 200 ₹ 200 ₹ 7,700
standard fire practice with necessary cut off & accessories as per instruction and
drainage arrangement to release water hammers & air locks
Supplying Fixing & Installation of Control Valve with turbine type automatic Alarm
9 Gong to be connected with control valve, drain & test valve and all other necessary
components as per manufacturer's specifications complete as required.
9.1 150mm dia. 1 Nos ₹ 42,500 ₹ 42,500 ₹ 350 ₹ 350 ₹ 42,850
T5 TOTAL FOR FIRE DETECTION AND ALARM SYSTEM ₹ 10,75,600 ₹ 2,96,500 ₹ 13,72,100
F. FIRE DETECTION AND ALARM SYSTEM

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
SITC of 4 Loop Fire Alarm Control Panel
Networkable Multi Loop Intelligent analogue Addressable Fire Alarm Control
Panel, Controller shall have color touch screen display with suitable cable
marshling box for cable termination with cable-glands, lugs, cable trunks and
installation channels, Control panel should be compatible for integration with
existing panel, and can support third party integration, panel should include 4
Loop driver cards, Address Card and extendiable up to 4 loop, each loop shall have
a minimum capacity of 150 detectors & 150 devices in one loop, with sufficient
1 numbers of programmable relay controls for controlling AHUs, ventilation fans, 1 Nos ₹ 2,95,000 ₹ 2,95,000 ₹ 15,000 ₹ 15,000 ₹ 3,10,000
access control, The Panel shall have facility for integration with BMS. Inculding 240
volts AC power supply, automatic supervised battery charger, 24 volts sealed lead
acid batteries sufficient for 24 hours normal working and then be capable of
operating the system for 30 Minutes in emergency conditions as required. battery
backup for 24 hrs.in standby mode & 30 min in alarm condition mode and with
required accessories.Panel should be (UL / EN Approved), Rate shall be Inculding
as mentioned above with cable-glands, lugs and Termination, required all other
accessories and complete as per guideline & site condition.
S/I/T/C of UL Listed and FM Approved Network Repeater Panel with 600
character LCD shall display and all events / detectors, devices status of complete
2 systems in the network. Rate shall be Inculding as mentioned above with cable- 1 Nos ₹ 1,18,000 ₹ 1,18,000 ₹ 8,000 ₹ 8,000 ₹ 1,26,000
glands, lugs and Termination, required all other accessories and complete as per
guideline & site condition.
SITC of Analogue Addressable Multi-Sensor Detectors
Multi-Sensor Detectors with inbuilt isolators (Optical Smoke + Heat) with base
box, Detectors shall be Surface (surface) mounting with required suitable junction
boxes, cable-glands, lugs, termination and other required installation accessories.
Analog addressable detector with one optical and onethermal sensor,360° visible
3 280 Nos ₹ 2,800 ₹ 7,84,000 ₹ 300 ₹ 84,000 ₹ 8,68,000
red LED; Optical/Thermal with Rotary-Switches; Operating temperature: -20 °C to
+50 °C. Maximum installation height: Max. 8 m.Manually and automatically
addressable; with Base for surface-mounted and flush-mounted cable feed;
Housing material: ABS; Rate shall be Inculding as mentioned above, with required
all other accessories. Complete as per guideline & site condition.
SITC of Analogue Addressable Manual Call Points with Hooter and Strobe
Analogue Addressable, Double Action, Indoor Application, Manual Pull Stations /
Manual Call Points suitable for wall / column mounting. MCP shall have red
coloured housing with molded, raised-letter operating instructions of contrast
colour. The MCP shall latch mechanically upon operation and shall remain so until
4 manually reset with its key by an authorized operator. The same shall be square in 8 Nos ₹ 3,400 ₹ 27,200 ₹ 350 ₹ 2,800 ₹ 30,000
shape & made of ABS plastic material. Surface / Flush Mounting. It shall have a
"Break glass" message embedded on the glass. The addressable module shall be
enclosed along with the break glass in a junction box ,should including all other
accessories. Rate shall be Inculding as mentioned above required all other
accessories Complete as per guideline & site condition.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Sr. No. Scope Description Total Qty Unit Material Unit Cost Material Cost Total Labour Unit Cost LabourCost Total Cost Total
SITC of Control Relay Module
Addressable relay interface module low voltage with 1 relay output, type in-built;
5 8 Nos ₹ 3,523 ₹ 28,184 ₹ 350 ₹ 2,800 ₹ 30,984
Address setting: 8 DIP switches, Dimensions: Approx. 50 mm x 22 mm (Ø x H), IP
30. Rate should be including all other accessories.
SITC of 2C x 1.5 Sq.mm Copper Armoured Multi stranded FRLS cable,
Shield is mandatory. However if the manufacturer's data-sheet recommends
shield, then Shielded cable shall be quoted.To be installed on wall / slab or
6 structure with necessary spacer & saddles cable to be properly Tied & Tagged to 1600 Mtrs ₹ 98 ₹ 1,56,800 ₹ 25 ₹ 40,000 ₹ 1,96,800
the supports. including necessary accessories, spider, supports, plated hardware
like lugs / ferrules, Insulation tapes etc. scope shall also include required end
termination using gland,lugs & required accessories. (Red in Colour)
SI & T of A3 Emegency Exit sinagage in panels.The route plan should be self-
7 illuminated / glow Complete as per Specification and requirment (inbuilt 15 mins 8 Nos ₹ 4,875 ₹ 39,000 ₹ 500 ₹ 4,000 ₹ 43,000
backup)
T6 TOTAL FOR FIRE DETECTION AND ALARM SYSTEM ₹ 14,48,184 ₹ 1,56,600 ₹ 16,04,784

GRAND TOTAL ₹ 44,52,484 ₹ 7,58,700 ₹ 52,11,184

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
5B: BILL OF QUANITIES
(ELECTRICAL WORKS)

Page 311 of 316

 YRG RESEARCH LAB

SUMMARY SHEET- YRG CARE & GAITONDE RESEARCH CENTER

SR. cost /
Scope Description SUPPLY INSTALLATION Amount (INR)
NO. sq.ft
A HT TRAFO ₹ 4,898,520 ₹ 767,800 ₹ 5,666,320 ₹ 109
1.0 MEDIUM VOLTAGE PANEL BOARD ₹ 4,768,437 ₹ 145,400 ₹ 4,913,837 ₹ 94
2.0 LIGHTING / POWER DISTRIBUTION BOARDS ₹ 1,647,449 ₹ 291,538 ₹ 1,938,987 ₹ 37
3.0 MEDIUM VOLTAGE CABLE ₹ 6,675,014 ₹ 1,443,900 ₹ 8,118,914 ₹ 156
4.0 INTERNAL WIRING ₹ 6,440,805 ₹ 1,731,749 ₹ 8,172,553 ₹ 157
5.0 EARTHING SYSTEM ₹ 818,345 ₹ 301,405 ₹ 1,119,750 ₹ 22
6.0 LIGHTNING PROTECTION SYSTEM : ₹ 693,800 ₹ 340,700 ₹ 1,034,500 ₹ 20
7.0 COMPUTER DATA NETWORKING & VOICE ₹ 2,372,215 ₹ 715,315 ₹ 3,087,530 ₹ 59
8.0 LIGHT FIXTURES & CELING FAN ₹ 2,624,968 ₹ 202,300 ₹ 2,827,268 ₹ 54
CLOSED CIRCUIT TELEVISION SYSTEM
9.0 ₹ 1,045,470 ₹ 221,715 ₹ 1,267,185 ₹ 24
(CCTV)
10.0 PUBLIC ADDRESS SYSTEM ( PA SYSTEM) ₹ 480,654 ₹ 59,900 ₹ 540,554 ₹ 10
11.0 FIRE STOPPER & FABRICATION ₹ 245,000 ₹ 92,000 ₹ 337,000 ₹ 6
ACCESS CONTROL SYSTEM (ACS) & TIME
12.0 ₹ 65,000 ₹ 35,000 ₹ 100,000 ₹ 2
ATTENDANCE SYSTEM
13.0 MISCELLANEOUS ₹ 164,250 ₹ 60,000 ₹ 224,250 ₹ 4
14.0 WATER LEAKAGE DETECTION SYSTEM ₹ 183,830 ₹ 20,000 ₹ 203,830 ₹ 4
15.0 RODENT SYSTEM ₹ 190,950 ₹ 43,080 ₹ 234,030 ₹ 5
16.0 DISEL GENERATOR ₹ 6,703,000 ₹ 349,750 ₹ 7,052,750 ₹ 136
17.0 UPS SYSTEM ₹ 4,113,400 ₹ 185,000 ₹ 4,298,400 ₹ 83
18.0 SOLAR SYSTEM ₹ 3,835,000 ₹ 295,000 ₹ 4,130,000 ₹ 79
TOTAL AMOUNT ( Rs) (excluding GST ) ₹ 27,812,156 ₹ 5,545,922 ₹ 55,267,658
Area ₹ 52,000 ₹ 1,063 ₹ 1,063

A Exclusions:
1 GST.

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

HT ELECTRICAL BILL OF QUANTITY

Supply Installation Remarks
Sr. No. Item Description UOM Qty.
Rate (INR) Total (INR) Rate (INR) Total (INR)

A 11/0.433 KV COMPACT SUBSTATION

Supply, erection, Testing and Commissioning of CSS as per IS

Specifications and respective drawings and Final approval from
cosultants

The unit rate for each item shall include :

1) Call for final inspection prior to dispatch.
2) Delivery of the CSS to site .
3) Shifting of the CSS from site store to the suitable location.
4) Fixing of Shipping Section .
5) Assembly and wiring of component supplied separately.
6) Installation of CSS to Electric Room/Suitable location including
removing packing.
7) Earthing all components, frame etc. to a common internal earth
bar.
8) M.S. parts should be painted with powder coating.
9) Supply & Fixing all accessories and supporting structure.
10) Supply & Fixing of M.. 100 mm. channels for fixing the CSS.
11) Connection, Testing & Commissioning.
12) Checking of Internal connection and wiring, operation of
switches, starter, TPN MCCB, relays, contractors etc.
13) Necessary cable termination space as per SLD.

HT COMPARTMENT: IP 54 COMPARTMENT
MV: SF6 Insulated NON-EXTENSIBLE 2 Way Indoor RMU (Make:
ABB, Siemens, Schneider) Manual
1 Incomer Cable box + 1 Outgoing Circuit Breakers
Rating: 12 kV, 630A, 21kA/3sec Manual Operation and Numerical
Relay for 3OC+ 1 EF (OC, EF, SC)
BIL: 12 kV /28 kV RMS / 75 kV pk
SF6 insulated 2-way non extensible manually operated compact
ring main unit comprising 1 Incomer cable box and 1 No. of
vacuum SF6 circuit breaker of 630A with integral earth switch, with
microprocessor self-powered relay - over current and
earth fault protection with shunt trip coil of 230V AC, with push
button for circuit breaker manual tripping, neon live cable
indicators with SF6 gas pressure monitor. (with Incoming Touch
proof termination Boot kit )

DISTRIBUTION TRANSFORMER : IP 23 COMPARTMENT

630 kVA 11/0.415 KV Hermetically Sealed Corrugated Fins type
Natural Ester Oil (IS 16659 / IEC
62770) Filled Non-Gas Cushion OUTDOOR Duty Copper wound
Distribution Transformer with Natural Ester Oil
(IS 16659 / IEC 62770)OLTC (ON LOAD TAP CHANGER) range
+7.5% to -12.5% in step of 2.5 % 8 Steps / 9 Position,
Dyn11, 5% Impedance and losses as per, IS 1180 ( PART 1)
:2021, Amd. 4, EEL-1, i.e. Total Losses at 100%
Loading: 6402 Watts & Total losses at 50% Loading: 2287 Watts
ACCESSORIES DGP Protection Relay (Detection of Gas & Pressure)
OTI + WTI with alarm & Trip Contacts Rating plate & Danger plates
Lifting Lugs Oil Level Indicator
Sample Valve M12 Earthing Terminal
MV & LV Bare Bushing Bi-directional Rollers
Manual PRV On load Tap Changer (OLG Make)
RTCC Panel (Wall Mounted & Compact, in loose)

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

LT COMPARTMENT: IP 54 COMPARTMENT
MAIN LV INCOMER:
1250 Amps 50 KA 4 pole EDO type ACB – 1 qty (L&K make)
MFM with suitable CT for incomer and as per SLD/BOQ
MISCELLANIOUS: COMMON
1) Illumination lamp in all 3 compartments
2) CRCA Metal Enclosure with Powder coating
3) Door Limit Switch for Transformer compartment
4) RYB Indicator
5) AL Cable for MV RMU to Transformer termination
6) Danger Plates & Logo plates
7) 1250 A Rated AL Bus bars for Termination b/w
Transformer to LT incomer
8) Earthing terminations
9) Paint Shade: RAL 7035 – Light Grey & RAL 3001 –
Signal Red
10) Bi-directional Rollers
Note : The rate shall also include the following :

a Supporting rigid frame work.

All fixing accessories such as foundation bolts, nuts and bolts etc as
b
required.
c Touching up all damaged paint with approved paint shade.
Interlocking shall be provided between transformer and VCB HT
d breaker panel. When transformer open respective HT breaker shall
be tripped.
Degree of protection for transformer enclosure shall be Indoor
e
duty.
Provision shall be made to be hooked up with BAS for status
f
indication.
g RAL 7032 shade shall be considered for all transformer equipment.
Space after neutral bifurcation for mounting PS class Current
h Transformer for restricted earth fault protection relay in 630 kVA
Transformer.
Necessary Seismic bracing shall be included. Detailed Seismic
I
design calculations shall be provided by the contractor.

Indoor type Marshalling box with RS-485 communication port for

BMS integration to monitor all transformer parameters or having 2
j.
No. potential free contact for alram, trip & annunciation (one for
BMS and one for control system).
Make: Cahors/CG/Telwane
11 kV/0.433, 630 kVA CSS as described above and technical
Set 1 ₹ 3,675,000 ₹ 3,675,000 ₹ 150,000 ₹ 150,000
specification

1 HT SWITCHGEAR :
Supply, erection, Testing and Commissioning of Panel Board as per
1.1 IS Specifications and respective drawings and Final approval from
cosultants

The unit rate for each item shall include :

1) Call for final inspection prior to dispatch.
2) Delivery of the panels to site .
3) Shifting of the panels from site store to the suitable location.
4) Fixing of Shipping Section .
5) Assembly and wiring of component supplied separately.
6) Installation of panel to Electric Room/Suitable location including
removing packing.
7) Earthing all components, frame etc. to a common internal earth
bar.
8) M.S. parts should be painted with powder coating.
9) Supply & Fixing all accessories and supporting structure.
10) Supply & Fixing of M.. 100 mm. channels for fixing the panels.
11) Connection, Testing & Commissioning.
12) Checking of Internal connection and wiring, operation of
switches, starter, TPN MCCB, relays, contractors etc.
13) Necessary cable termination space as per SLD.

Metering Kiosk
Supply,Installation, testing and commissioning of floor mounting
indoor type tariff metering kiosk with trivector meter, 0.2 S CTPT
As per
units and make approved by Electricity Distribution Board. It shall
1.1.1 NOs. 1 ₹ 326,500 ₹ 326,500 ₹ 45,000 ₹ 45,000 MSEDCL
be suitable for termination of incoming & outgoing 3Cx 185 Sqmm,
requirement
11 kV(E), Al, XLPE, armoured HT cable. As per MSEDCL Norms and
Regulations. Rate shall include all required process and
documentations

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

HT CABLE LAYING
Supply,Installation, testing and commissioning 3Cx 185 Sq.mm As per
1.1.1 11kV XLPE -(E)-Cable Flat Armoured Type in redy trench , hume Mtrs. 100 ₹ 2,195 ₹ 219,500 ₹ 230 ₹ 23,000 MSEDCL
pipes As per MSEDCL Norms and Regulations. Rate shall include requirement
all required process and documentations
HT CABLE TERMINATION
Supply,Installation, testing and commissioning of Heat shrikable As per
1.1.2 type cable end termination kit for following XLPE insulated, (E) Nobs 8 ₹ 9,740 ₹ 77,920 ₹ 3,200 ₹ 25,600 MSEDCL
grade cable 3Cx185 Sq.mm 11kV XLPE -E-Cable Indoor type end requirement
termination
Liasoning work with statutary authorities including Load Demand
approval letter, Electrical inspectorate approval, Preparation of As per
1.1.3 Drawings for the approval, Charging permission, Load sanctioning JOB 1 ₹ - ₹ 350,000 ₹ 350,000 MSEDCL
approval letter from MSEB and making of AS-BUILT requirement
drawing etc

Providing, Transporting, fabrication & installing of G.I. Chain link

fencing 50mm mesh X 10 gauges wires, 2.4 mtr height with MS 65
As per
X 65 X6 vertical post spaced at approx.
1.1.4 m - ₹ 1,250 ₹ - ₹ 650 ₹ - MSEDCL
3.0 mtr. C/C with supports post after every 8th post & 2 supports
requirement
on all corners for HT
yard and access gate.
1.1.5 Earthing for HT yard
Supply & Installation of maintenance free pipe in pipe type earthing
system alongwith (CI) / copper bare earth conductor bar / flexible As per
wire /strip of following sizes. The installation shall include drilling of MSEDCL
holes,connection & supply of adequate lugs, clamping, hardware requirement
material, Welded joints.
Supply, installation & testing of CI EARTHING 100mm dia. x 3000
mm Copper rod, ground improvement compound, earth chamber,
a nos. 19 ₹ 14,800 ₹ 281,200 ₹ 6,800 ₹ 129,200
hardware etc. as required to complete the job and as directed by
site incharge.
b 75 x 10 mm G.I. Strip (for yard Earthing main grid.) m 50 ₹ 650 ₹ 32,500 ₹ 120 ₹ 6,000
50 x 6 mm G.I. Strip (for yard equipments tapping to main earth
c m 60 ₹ 450 ₹ 27,000 ₹ 100 ₹ 6,000
grid)
TOTAL ₹ 964,620 ₹ 584,800
1.1.6 RCC HUME PIPE
Supply & Installation, Supply and laying of following sizes of RCC/
PVC pipe for road crossing (Excavation will not be measured
seperately)

Supplying & laying (including excavation) 150 mm dia RCC Hume

pipe
with coupling collar of standerd thickness at required depth up to
a 900 mm below road/ ground surface, for enclosing provided cable Mtrs. 30 ₹ 850 ₹ 25,500 ₹ 90 ₹ 2,700
&
necessary back filling with light ramming to make the road/ground
surface as it was (Except bitumen carpet).

Supplying and laying (including excavtion of suitable width & depth

up to 90 cm) 120 mm outside dia. double wall corrugated pipes
b Mtrs. 30 ₹ 6,500 ₹ 195,000 ₹ 560 ₹ 16,800
(DWC) of HDPE for enclosing cable below ground road surface, to
required depth complete.

750 x 750 x 1000 Chambers with complete bricks masonry, covers

c & Nos. 3 ₹ 12,800 ₹ 38,400 ₹ 4,500 ₹ 13,500
other accessories.
TOTAL ₹ 258,900 ₹ 33,000
TOTAL SUPPLY BILL AMOUNT ₹ 4,898,520
TOTAL INSTALLATION BILL AMOUNT ₹ 767,800
TOTAL AMOUNT SUPPLY & LABOUR (WITHOUT GST) ₹ 5,666,320
NOTES
1) This BOQ is prepared based on available inputs (i.e. Equipment list, Equipment layout, plot plant etc.)
2) Contractor has to refer latest revision of drawings and documents for execution. Final drawings shall be issued after award of contract.

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

ELECTRICAL BILL OF QUANTITY -

Supply Installation Remarks
S. No. Item Description UOM Qty.
Rate (INR) Total (INR) Rate (INR) Total (INR)

1 MEDIUM VOLTAGE PANEL BOARD :

Supply, erection, testing and commissioning of Panel Board as per IS Specifications and
1.1
respective drawings and Final approval from cosultants
The unit rate for each item shall include :
1) Call for final inspection prior to dispatch.
2) Delivery of the panels to site .
3) Shifting of the panels from site store to the suitable location.
4) Fixing of Shipping Section .
5) Assembly and wiring of component supplied separately.
6) Installation of panel to Electric Room/Suitable location including removing packing.
7) Earthing all components, frame etc. to a common internal earth bar.
8) M.S. parts should be painted with powder coating.
9) Supply & Fixing all accessories and supporting structure.
10) Supply & Fixing of M.. 100 mm. channels for fixing the panels.
11) Connection, Testing & Commissioning.
12) Checking of Internal connection and wiring, operation of switches, starter, TPN MCCB,
relays, contractors etc.
13) Necessary cable termination space as per SLD.
1.1.1 MAIN LT PANNEL ( AS PER SLD) NOs. 1 1,647,335 1,647,335 45,000 45,000
RTPFC PANEL 250kVAR (AS PER SLD) Capacitor Based with 7% d Tune Filter with max
capacitor bank of 25kvar
1.1.2 16 stage Relay IGBC based with 7% d Tune Filter . NOs. 1 800,000 800,000 22,500 22,500
Minimum step value 2 KVAR,
Maximum step value 25 KVAR
1.1.3 UPS PANEL (AS PER SLD) NOs. 1 536,837 536,837 12,500 12,500
1.1.4 INVERTER PANEL (AS PER SLD) NOs. 1 167,250 167,250 12,300 12,300
1.1.5 FIRST FLOOR PANEL (AS PER SLD) NOs. 1 409,354 409,354 12,600 12,600
1.1.6 FIFTH FLOOR PANEL (AS PER SLD) NOs. 1 365,953 365,953 13,500 13,500
1.1.7 SIXTH FLOOR PANEL (AS PER SLD) NOs. 1 414,812 414,812 13,500 13,500
1.1.8 SEVENTH FLOOR PANEL (AS PER SLD) NOs. 1 426,898 426,898 13,500 13,500
- -
TOTAL MEDIUM VOLTAGE PANEL BOARD : 4,768,437 145,400
2 LIGHTING / POWER DISTRIBUTION BOARDS :
Supply,Installation, Testing & Commissioning of Distribution Board as per following
Description.
Ready made, Double door, Lockable, Powder coated, M.C.B. Incommer , Horizontal series
type Distribution boards, with pre-wired up to the connector strip and with neutral links per
phase and connectors for each circuits. The rate should include the supply prewired db at site
store.The distibution board should be sheet steel clad, wall/ recess mounting, dust and
vermin proof distribution boards constructed from 14 SWG sheet steel IP 42 construction,
finished with rust proof red oxide coating and two coats of paint with hinged gasketted door
and housing the following complete with suitably rated PVC insulated copper busbars with
interconnections and neutral bar assembly, earthing terminals.
2.1 Note :The DBs shall be supplied at site to be used during civil construction activity.
It should be supplied with proper protection to avoid any physical damage or
ingress of water /cement during construction.
All distribution boards enclosures shall have an etched zinc base stove painted followed by
synthetic stoved enamel, colour light gray.
All distribution boxed shall be made by approved/licenses MCB/DP manufacturer. The bus bar
shall be such that circuit could be isolated easily. Neutral bus bars shall be provided with the
same number of terminals, as there are single ways on the board, in addition to the terminals
for incoming mains. An earth bar of similar size at the neutral bar shall also be provided.

Supply,Installation , Testing and commissioning of Double door type 12 way VTPN DB

2.1.2 following as per specifications and relevant IS.& MCB IP-43 METAL DOOR DB ( Ground Nos. 1 24,746 24,746 1,800 1,800
Floor DB)
Supply,Installation , Testing and commissioning of Double door type 8 way VTPN DB
2.1.3 following as per specifications and relevant IS.& MCB IP-43 METAL DOOR DB Nos. 18,392 - 1,500 -

Supply,Installation , Testing and commissioning of Double door type 6 way VTPN DB

2.1.4 following as per specifications and relevant IS.& MCB IP-43 METAL DOOR DB (old building ) Nos. 6 15,802 94,812 1,500 9,000

Supply,Installation , Testing and commissioning of Double door type 4 way VTPN DB

2.1.5 following as per specifications and relevant IS. (MCB IP-43 METAL DOOR DB) (Floor DB) Nos. 14,268 - 1,350 -

Supply,Installation , Testing and commissioning of Double door type 16 way ETPN DB

2.1.6 following as per specifications and relevant IS. (MCB IP-43 METAL DOOR DB) Nos. 15,870 - 1,500 -

Supply,Installation , Testing and commissioning of Double door type 12 way ETPN DB

2.1.7 following as per specifications and relevant IS.(MCB IP-43 METAL DOOR DB) (MAIN RAW Nos. 4 12,798 51,192 1,500 6,000
DB , MAIN UPS DB )
Supply,Installation , Testing and commissioning of Double door type 8 way ETPN DB
following as per specifications and relevant IS. (MCB IP-43 METAL DOOR DB)
2.1.8 Nos. 1 8,630 8,630 1,500 1,500
(MAIN RAW DB ,M/C DB )

Supply,Installation , Testing and commissioning of Double door type 6 way ETPN DB

2.1.9 following as per specifications and relevant IS.(MCB IP-43 METAL DOOR DB) (M/C DB) Nos. 5 7,146 35,730 1,300 6,500

Supply,Installation , Testing and commissioning of Double door type 4 way ETPN DB

2.1.10 following as per specifications and relevant IS.(MCB IP-43 METAL DOOR DB) (COMMON LDB Nos. 11 5,776 63,536 1,200 13,200
, M/C DB,PDB)
Supply,Installation , Testing and commissioning of Double door type 16 way SPN DB
2.1.11 following as per specifications and relevant IS. (MCB IP-43 METAL DOOR DB) ( LAB DB) Nos. 5 4,390 21,950 1,100 5,500

Supply,Installation , Testing and commissioning of Double door type 12 way SPN DB

2.1.12 following as per specifications and relevant IS.(MCB IP-43 METAL DOOR DB) Nos. 3,476 - 900 -

Supply,Installation , Testing and commissioning of Double door type 8 way SPN DB

2.1.13 following as per specifications and relevant IS. (MCB IP-43 METAL DOOR DB) ( LAB DB ) Nos. 7 2,892 20,244 900 6,300

Supply,Installation , Testing and commissioning of Double door type 6 way SPN DB

2.1.14 following as per specifications and relevant IS.(MCB IP-43 METAL DOOR DB) (HVAC DB ) Nos. 3 2,740 8,220 850 2,550

Supply,Installation , Testing and commissioning of Double door type 4 way SPN DB

2.1.15 following as per specifications and relevant IS.(MCB IP-43 METAL DOOR DB) Nos. 2 2,344 4,688 750 1,500

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

Supply , Installation , Testing and commissioning of 360 A FP MCCB,50 kA with wheather

2.1.18 no. 4 38,450 153,800 3,500 14,000
proof enclosure box. (ISOLATOR)
Supply , Installation , Testing and commissioning of 125 A FP MCB,10kA with wheather proof
2.1.19 no. 2 8,300 16,600 3,250 6,500
enclosure box (ISOLATOR)
Supply , Installation , Testing and commissioning of 63 A FP MCB,25kA with wheather proof
2.1.20 no. 4 22,500 90,000 2,900 11,600
enclosure box. (ISOLATOR)
Supply , Installation , Testing and commissioning of 63 A DP MCB,10kA with wheather proof
2.1.21 no. 1 1,186 1,186 1,890 1,890
enclosure box. (ISOLATOR)
Supply , Installation , Testing and commissioning of 32 A DP MCB,10kA with wheather proof
no. 1,450 - 1,500 -
enclosure box. (ISOLATOR)
Supply , Installation , Testing and commissioning of 63 A FP CHANGEOVER SWITCH with with
2.1.22 Metal enclosure box. Power coated along with all required accessories no. 3 6,658 19,974 1,600 4,800

Supply , Installation , Testing and commissioning of 630 A FP CHANGEOVER SWITCH with

2.1.23 Metal enclosure box. Power coated along with all required accessories no. 1 54,658 54,658 5,463 5,463

2 SWITCHGEAR TO INSTALLED IN EXISITNG DBS

2.2.2 SITC OF 10-40A SP MCB 10KA no. 562 483 271,247 200 112,420
2.2.3 SITC OF 63A SP MCB 10KA no. 11 499 5,491 250 2,750
2.2.4 SITC OF 16A-40A DP MCB 10KA no. 26 1,143 30,165 200 5,280
2.2.5 SITC OF 63A DP MCB 10KA no. 9 1,182 10,402 250 2,200
2.2.6 SITC OF 16A-40A TP MCB 10KA no. 13 1,747 23,060 300 3,960
2.2.7 SITC OF 63A TP MCB 10KA no. 38 1,807 68,674 300 11,400
2.2.8 SITC OF 16A-40A FP MCB 10KA no. 15 2,236 33,547 350 5,250
2.2.9 SITC OF 63A FP MCB 10KA no. 22 2,314 50,899 350 7,700
2.2.10 SITC OF 16A-40A DP RCCB 100MA no. 22 2,772 60,984 350 7,700
2.2.11 SITC OF 63A DP RCCB 100MA no. 5 3,301 16,506 350 1,750
2.2.10 SITC OF 16A-40A TP RCCB 100MA no. 5 4,587 22,935 350 1,750
2.2.11 SITC OF 63A TP RCCB 100MA no. 12 6,881 82,566 350 4,200
2.2.10 SITC OF 16A-40A FP RCCB 100MA no. 12 4,587 55,044 350 4,200
2.2.11 SITC OF 63A FP RCCB 100MA no. 6 6,881 41,283 350 2,100
2.2.13 SITC OF 63A DP RCBO 100MA no. 9 5,579 50,209 350 3,150
2.2.14 SITC OF 16A-40A DP RCBO 100MA no. 9 5,579 50,209 350 3,150
2.2.17 SITC OF 63A TP MCCB 10KA TM RELEASE no. 8 1,542 11,565 650 4,875
2.2.18 SITC OF 160 A TP MCCB 36KA TM RELEASE no. 8 11,587 92,698 1,200 9,600
TOTAL LIGHTING / POWER DISTRIBUTION BOARDS : 1,647,449 291,538
3 MEDIUM VOLTAGE CABLE
Supply, laying, Connection, Testing and Commissioning of heavy duty, medium voltage, XLPE
(IS 7098 - PART-II) insulated, stranded AL. / CU. conductor Armoured cables as per
specification & IS.
The cable shall have outer sheeth of XLPE and extruded inner sheath of PVC with stranded AL
conductor wherever specified. FR GRADE
The cable shall be laid underground in excavated trench / prepared trench / hume pipes when
laid outside the building. Cable shall be laid throught preapred trench / cable tray / duct /
hume pipe / channel / floor trunks etc when laid inside the building.
The scope shall include:

2
3.1.1 3C x 2.5 mm , Cu. XLPE 2XFY Mtrs. 50 213 10,650 45 2,250
2
3.1.2 4C x 2.5 mm , Cu XLPE 2XFY Mtrs. 45 267 12,015 50 2,250
2
3.1.3 4C x 4 mm , Cu XLPE 2XFY Mtrs. 520 384 199,680 60 31,200
2
3.1.4 4C x 6 mm , Cu. XLPE 2XFY Mtrs. 450 543 244,350 65 29,250
2
3.1.5 4C x 10 mm , CU. XLPE 2XFY Mtrs. 350 879 307,650 85 29,750
2
3.1.6 4C x 16 mm , CU XLPE 2XFY Mtrs. 640 1,355 867,072 95 60,800
2
3.1.7 3.5C x 25 mm , AL XLPE A2XFY Mtrs. 685 282 193,170 110 75,350
2
3.1.8 3.5 C x 70 mm , AL XLPE Mtrs. 450 651 292,950 230 103,500
2
3.1.9 3.5C x 120 mm , AL XLPE Mtrs. 540 1,018 549,504 280 151,200
2
3.1.10 3.5C x 150 mm , AL XLPE A2XFY Mtrs. 650 1,206 783,900 325 211,250
2
3.1.11 3.5C x 185 mm , AL XLPE A2XFY Mtrs. 20 1,527 30,540 380 7,600
2
3.1.12 3.5C x 240 mm , AL XLPE Mtrs. 350 1,917 670,950 380 133,000
2
3.1.13 3.5C x 300 mm , Al XLPE (4Runs from Trafo) Mtrs. 520 2,359 1,226,784 410 213,200
2
3.1.14 12C x 1.5 mm , Cu. PVC/XLPE Mtrs. 70 268 18,774 120 8,400
3.2 CABLE END TERMINATION AND CONNECTION
Fixing, Connection, Testing & Commissioning of double compression brass cable glands and
crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in
specifications and IS. The glands and lugs / sockets shall be suitable for cable size and
type mentioned above. The job also includes, if necessary, supply and fixing of extension
busbar of same material on circuit breaker or panel board terminal / connector to connect
more than one no. of parallel cables or to connect higher size cable to lower size unit. The job
also includes earthing the glands and armour of the cable with common earth bar or flexible
copper mesh.
2
3.2.1 3C x 2.5 mm , Cu. XLPE 2XFY Nos. 10 61 611 45 450
2
3.2.2 4C x 2.5 mm , Cu XLPE Nos. 10 75 750 50 500
2
3.2.3 4C x 4 mm , Cu XLPE 2XFY Nos. 15 400 6,000 350 5,250
2
3.2.4 4C x 6 mm , Cu. XLPE 2XFY Nos. 15 450 6,750 350 5,250
2
3.2.5 4C x 10 mm , CU. XLPE 2XFY Nos. 25 500 12,500 450 11,250
2
3.2.6 4C x 16 mm , CU XLPE 2XFY Nos. 25 560 14,000 450 11,250
2
3.2.7 3.5C x 25 mm , AL XLPE A2XFY Nos. 42 502 21,084 800 33,600
2
3.2.8 3.5 C x 70 mm , AL XLPE Nos. 10 980 9,800 1,150 11,500
2
3.2.9 3.5C x 120 mm , AL XLPE Nos. 16 1,350 21,600 1,200 19,200
2
3.2.10 3.5C x 150 mm , AL XLPE A2XFY Nos. 10 1,520 15,200 1,350 13,500
2
3.2.11 3.5C x 185 mm , AL XLPE A2XFY Nos. 15 1,580 23,700 1,350 20,250
2
3.2.12 3.5C x 240 mm , AL XLPE Nos. 10 1,628 16,280 1,500 15,000
2
3.2.13 3.5C x 300 mm , Al XLPE Nos. 24 2,455 58,920 1,650 39,600
2
3.2.14 12C x 1.5 mm , Cu. PVC/XLPE Nos. 10 1,795 17,950 500 5,000
3.3 CABLE TRAY
Supply, Installation, laying and Connection of H.D.G.I. Perforated & Ladder Type cable tray
with bends, tees, clamps and couplers for fixing of cable with suitable MS structure and
anchor fastner for supporting and necessary hardware with necessary welding has to be done
to complete the job from ISA / ISMC / PLATE.
The job also includes to paint the structure with two coats of red oxide and two coats color of
enamel paint as approved . All material shall be Hot dip galvanised as per IS (816 g/m2) and
specifications. The structural steel supports for the trays are to be provided at every 1 Mtrs.s.
as per technical specifications.
Standard length of cable tray shall be 3 meters.

3.3.1 600 x 50 mm. wide., perforated cable tray Mtrs. 20 1,860 37,200 250 5,000
3.3.2 450 x 75 mm. wide., perforated cable tray Mtrs. 50 1,089 54,450 190 9,500
3.3.3 300 x 50 mm. wide., perforated cable tray Mtrs. 515 986 507,790 160 82,400

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

3.3.4 200 x 50 mm. wide., perforated cable tray Mtrs. 445 728 323,960 160 71,200
3.3.5 150 x 50 mm. wide., perforated cable tray Mtrs. 100 604 60,400 120 12,000
3.3.6 100 x 50 mm. wide., perforated cable tray Mtrs. 120 484 58,080 110 13,200

TOTAL MEDIUM VOLTAGE CABLE 6,675,014 1,443,900

4 INTERNAL WIRING

Wiring for Light Points Controlled from Switch Boards ( Consider Antibacterial Type
4
switch & socket as where metnioned )
SITC of Point wiring for light / Celing Fan / 5A Socket outlet / 15A Socket outlet/ Exhaust
Fan/15A Power plugs etc.with 650/1100 volts grade as per IS694-1990 ISI marked
multistranded copper conductor FRLS PVC insulated wires in 25mm Rigid PVC conduit MMS
with ISI mark (IS-9537III) medium grade concealed in slab/wall with suitable spacers /
saddles etc. Earthing wire 1.00 sq.mm PVC insulated shall be provided for all poits.
Accessories e.g Bakelite lamp holders /3way PVC connectors, switch, sockets, MS plate &
boxes, angle holder, fan hool, fan rod etc. shall be 2.5 sq.mm i.e from DB to First Board and
from board to point wire shall be 1.5 Sq.mm (Use white switches/Sockets for Raw Power
points & Black switches/ sockets for UPS Power points )(Fan Light Switch should have
indicative type, Fan and Light should be written on switch) Antibacterial Type switch &
socket

Primary light points controlled by one 6A switch with 1.0 sq.mm wire PN+E with complete
4.1.1 Nos. 176 760 133,760 250 44,000
accessories ( Avg Length 7 mtr)
Secondary light points controlled by one 6A switch with 1.0 sq.mm wire PN+E with complete
4.1.2 Nos. 284 650 184,405 200 56,740
accessories ( Avg Length 5 mtr)
Primary light points controlled by one 10A MCB. 1.0 sq.mm wire PN+E with complete
4.1.3 Nos. 15 890 13,350 300 4,500
accessories ( Avg Length 10 mtr)
Secondary light points controlled by 10A MCB. 1.0 sq.mm wire PN+E with complete
4.1.4 Nos. 30 750 22,500 200 6,000
accessories ( Avg Length 7 mtr)
6A universal socket with one 6A switch on switch board with cover plate and all required
4.1.5 Nos. 20 430 8,600 150 3,000
accessories (HALF POINT)
One Exhaust Fan (6A plug socket) controlled by 6A switch and mounting plate with necessary
accessories. Supply of exhaust fan shall not be included. with 1.00 Sq.mm wires with 3P
4.1.6 Nos. 10 2,950 29,500 250 2,500
Ceiling Rose (for avarage length of 5 mtr.) Conrolled by Occupancy Sensor

Ceiling Fan Point with 1.5 Sq.mm PN+E wires with suitable fan hook box,
4.1.7 Connectors with dimmer and including all required accessories etc. (for avarage length of 5 Nos. 10 1,217 12,170 250 2,500
mtr.)
SITC of wiring Mains with Cu.FRLS wire 1100 V gr. 2 x 2.5 sq. mm + 1 x 1.5 sq mm for Ph
4.1.8 +N+E (from LDB To SB) price should including pvs mms conduit 25mm dia Mtrs. 11,830 95 1,123,850 36 425,880

4 Wiring Mains for Raw Power Distribution - -

Supply, laying, connection and testing of raw power socket wiring from PDB to raw power
point with following wires/cable to be laid through electrical channel / floor raceway / PVC
- -
condiut in concealed/surface manner. (cost of Channel / raceway not to be included in their
rate.)
Supply, laying, connection and testing of Wiring from PDB's to raw power point with 2R x 2.5
4.2.1 sq.mm.+1 R x 1.5sq.mm FRLS Cu. Flexible wire to be laid through floor raceway or PVC Mtrs. 6,912 130 898,560 36 250,560
conduit in floor /furniture.
Supply, laying, connection and testing of Wiring from PDB's to raw power point with 2R x 4
4.2.2 sq.mm.+1 R x 2.5sq.mm FRLS Cu. Flexible wire to be laid through floor raceway or PVC Mtrs. 5,320 203 1,081,822 45 239,134
conduit in floor /furniture.
Supply, laying, connection and testing of Wiring from PDB's to raw power point with 2R x 6
4.2.3 sq.mm.+1 R x 4sq.mm FRLS Cu. Flexible wire to be laid through floor raceway or PVC Mtrs. 2,200 306 673,750 55 121,220
conduit in floor /furniture.
Supply, fixing, connection and testing of consist 6A universal power plug socket along
with 6 A switch with top cover plate, PVC back box suitable for modular plate with all
4.2.4 accessories to complete the job. The Switch Socket with the Shutter. (Approval for the Nos. 20 830 16,559 250 4,988
colour of the cover plate should be taken from the Architect/Client) ANTIBACTERIAL TYPE

Supply, fixing, connection and testing of consist combination of 6A universal power

plug socket along with 16 A switch with top cover plate, PVC back box suitable for
4.2.5 modular plate with all accessories to complete the job.The Switch Socket with the Nos. 28 1,150 32,603 250 7,088
Shutter.(Approval for the colour of the cover plate should be taken from the Architect/Client)
ANTIBACTERIALTYPE
Supply, fixing, connection and testing of consist 6/16A universal power plug socket along
with 6/16 A switch with top cover plate, PVC back box suitable for modular plate with all
4.2.6 accessories to complete the job.The Switch Socket with the Shutter. (Approval for the Nos. 135 1,510 204,530 350 47,408
colour of the cover plate should be taken from the Architect/Client) ANTIFUNGAL TYPE

Supply, fixing, connection and testing of Combination of 2 number of 6/16A universal

power plug socket along with 6/16 A switch with top cover plate, PVC back box suitable for
4.2.7 modular plate with all accessories to complete the job. The Switch Socket with the Nos. 49 1,620 79,947 370 18,260
Shutter. (Approval for the colour of the cover plate should be taken from the
Architect/Client) ANTIFUNGAL TYPE
Supply, fixing, connection and testing of Combination of 3 number of 6/16A universal
power plug socket along with 6/16 A switch with top cover plate, PVC back box suitable for
4.2.8 modular plate with all accessories to complete the job.The Switch Socket with the Nos. 26 48,038 450 11,813
Shutter. (Approval for the colour of the cover plate should be taken from the
Architect/Client) ANTIFUNGAL TYPE 1830
Supply, fixing, connection and testing of Combination of 4 number of 6/16A universal
power plug socket along with 6/16 A switch with top cover plate, PVC back box suitable for
4.2.9 modular plate with all accessories to complete the job.The Switch Socket with the Nos. 18 42,840 450 8,033
Shutter. (Approval for the colour of the cover plate should be taken from the
Architect/Client) ANTIFUNGAL TYPE 2,400
WORK STATION TYPE-A1 (WS-A1)
3 No. 6A SWITCH SOCKET OUTLETS-UPS POWER
4.2.10 1 No. DATA POINT-LOW VOLTAGE Nos. 67 2,240 150,528 450 30,240
1 No. TELEPHONE POINT-LOW VOLTAGE

LAB POWER SOCKET TYPE-A1 (LP-A1)

3 No. 6A SWITCH SOCKET OUTLETS-UPS POWER
4.2.11 1 No. DATA POINT-LOW VOLTAGE Nos. 54 2,240 119,952 450 24097.5
1 No. TELEPHONE POINT-LOW VOLTAGE

Supply, fixing, testing, of good industrial socket industrial interlocked switched sockets with
MCB's of different rating in readymade IP 65 metal enclosure. Box should be suitable to
4.2.12 terminate cable / wires easily, complete including cable end box where is required.63A 3 ø, Nos. 1 7,174 7,174 550 550
3P+N-E, Socket outlet with 100A TPMCB with metal enclosure.

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

Supply, fixing, testing, of good industrial socket industrial interlocked switched sockets with
MCB's of different rating in readymade IP 65 metal enclosure. Box should be suitable to
4.2.13 terminate cable / wires easily, complete including cable end box where is required.63A 3 ø, Nos. 9 4,318 38,858 500 4500
3P+N-E, Socket outlet with 63A TPMCB with metal enclosure.

Supply, fixing, testing, of good industrial socket industrial interlocked switched sockets with
MCB's of different rating in readymade IP 65 metal enclosure. Box should be suitable to
4.2.14 terminate cable / wires easily, complete including cable end box where is required 32A 3 ø, Nos. 10 3,500 35,000 450 4500
3P+N-E, Socket outlet with 32A TP MCB with metal enclosure.

Supply, fixing, testing, of good industrial socket industrial interlocked switched sockets with
MCB's of different rating in readymade IP 65 metal enclosure. Box should be suitable to
4.2.15 terminate cable / wires easily, complete including cable end box where is required 16A 3 ø, Nos. 2 3,000 6,000 450 900
3P+N-E, Socket outlet with 16A TP MCB with metal enclosure.

-
4 Wiring Mains for Raw Power Distribution
Supply, fixing,connection of cable,testing of 25A industrial socket for network rack (single
4.3.1 Nos. 7 3,450 24,150 560 3,920
phase)
Supply, fixing,connection of cable,testing of 32A industrial socket for server rack (three
4.3.2 Nos. 7 3,180 22,260 560 3,920
phase)
Supply and laying of 25 mm. dia. medium duty rigid PVC conduits with all accessories to
4.3.3 Mtrs. 500 36 18,000 30 15,000
complete the job.
Supply & Installation of METAL DLP trunking 2 mm thick with cover made up from 1.6mm
thick with knock out on both side at each 600mm distance ,. The cable trunking shall be fixed
to the ceiling/ wall with support with at an interval of 1 meter / or the MS angle iron
4.3.4
fabricated support depending upon the location. .Height of trunking from FFL level to be
considered as 1200 mm. Including all accesories like joints bend etc.

4.3.5 DLP Trunking 150mmx 50mm (Legrand ) Mtrs. 225 1,620 364,500 450 101,250
4.3.6 DLP Trunking 100mmx 50mm (Legrand ) Mtrs. 150 1,350 202,500 400 60,000
4A RACEWAY WORK
Supply & Laying of Raceways / Conduits ( for under floor trenches / On trays) on flooring.
Raceways / conduits shall be fixed to the flooring with GI clamps for finished levels as per the
site conditions or through partitions with all accessories. The rate shall include preparation of
trenches upto 22" wide by carefully removing the floor tiles / IPS & malwa below the tiles for
4A1 laying Raceways/conduits . The depth of the trenches shall be at least 2 inches from the
finished floor level or upto RCC of the slab. The rate shall also include the activity of clearing
the debris generated at designated area by electrical vendor will carry out the filling the same
with PCC 1:2:3 with metal wiremesh as directed at site

a 150 (W) x 38 (H) mm - 1.6 mm thick mtr 320 611 195,520 110 35200
b 100 (W) x 38 (H) mm - 1.6 mm thick mtr 450 572 257,400 95 42750
c 50 (W) x 38 (H) mm - 1.6 mm thick mtr 20 313 6,260 80 1600
d 25mm HMS PVC conduit with accessories for Power mtr 510 36 18,360 30 15300
Supply & Installation of Following in Powder Coated Junction boxes shall have knock-outs on all sides
4A2 suitable for Raceways/conduits. With PAINTED GI Plate The knock out shall be removed at site as per
requirements.
a 450 (L) x 450 (W) x 50 (H) mm JB - 2 mm thick Nos 23 885 20,351 500 11500
b 350 (L) x 350 (W) x 50 (H) mm JB - 2 mm thick Nos 5 804 4,022 450 2250
c 300 (L) x 300 (W) x 50 (H) mm JB - 2 mm thick Nos 3 670 2,011 400 1200
d 250 (L) x 250 (W) x 50 (H) mm JB - 2 mm thick Nos 5 536 2,681 350 1750
e 200 (L) x 200 (W) x 50 (H) mm JB - 2 mm thick Nos 74 429 31,746 300 22200
f 150 (L) x 150 (W) x 50 (H) mm JB - 2 mm thick Nos 5 330 1,650 200 1000
g 100(L) x 100 (W) x 50 (H) mm JB - 2 mm thick Nos 50 359 17,950 150 7500
h 50 (L) x 50 (W) x 50 (H) mm JB - 2 mm thick Nos 120 200 24,000 150 18000
TOTAL RACE WAY WORK
4B WIRING FOR INDOOR AC UNIT
Supply, laying, connection and testing of universal power socket wiring from DB to AC IDU
with following wires to be laid through electrical channel / floor raceway / PVC condiut in
concealed/surface manner. (cost of Channel / raceway not to be included in their rate.)
Cost of MCB shall not be considered in point rate.
Wire Size:
Phase + Neutral + Earth : 2 Nos. x 1.5 sq.mm & 1 Nos. X 1.0 sq.mm Cu FRLS flexible
wire (1100 V)

Supply, fixing, connection and testing of 6 A universal power plug socket alongwith 6 A switch
4B1 with top cover plate, PVC back box suitable for modular plate with all accessories to complete Nos. 70 830 58,100 250 17,500
the job.
Supply, fixing, connection and testing of 20 A universal power plug socket alongwith 20 A
4B2 switch with top cover plate, PVC back box suitable for modular plate with all accessories to Nos. 10 1,150 11,500 250 2,500
complete the job.
Supply, laying, connection and testing of above mentioined wires/cables from ACDB to Each
4B3 AC fan coil unit power socket to be laid through electrical channel cost should be Including Mtrs. 2,450 79 193,550 20 49,000
PVC condiut.
TOTAL INTERNAL WIRING 6,440,805 1,731,749

5 EARTHING SYSTEM
Supply installation, testing & commissioning of maintenance free pipe type earthing system
as per IS. includes laying ,cutting, bending, welding ,applying zinc rich paint, drilling /cutting
holes ,termination with equipments and as instructed by site engineer with G.I, strip material
as mentioned below. Excavation and back filling, supply, fixing of brick masonry with CI
frame and hinged covers, layer of Bentonite, salt, charcoal alternate layered, funnel with
watering pipe, wire mesh, lugs etc. All GI wires / cables
to be lugged.

Supply, installation & testing of chemical treated maintenanace free GI pipe in pipe type
earth electrode dia 100mm. 3 MTR length rod CLASS B ground improvement compound, earth
5.1.1 nos 24 10,800 259,200 6,500 156,000
chamber, hardware etc. as required to complete the job and as directed by site incharge.

Supply, installation & testing of Clean Earth Pit (CEP) for electronic equipments with 12mm
dia. x 3000 mm Copper rod, ground improvement compound, earth chamber, hardware etc.
5.1.2 nos 3 15,200 45,600 6,500 19,500
as required to complete the job and as directed by site incharge.

Supply, installation & testing of CI EARTHING 100mm dia. x 3000 mm Copper rod, ground
5.1.3 improvement compound, earth chamber, hardware etc. as required to complete the job and nos 3 14,800 44,400 7,800 23,400
as directed by site incharge.
5.1.4 75 x 10 mm GI Strip m 10 650 6,500 120 1,200
5.1.5 50 x 6 mm GI Strip m 120 450 54,000 100 12,000
5.1.6 25 x 3mm GI Strip m 534 125 66,750 35 18,690
5.1.7 50 x6 mm Copper strip (Copper Strip for Earth Bus) NOS 2 500 1,000 450 900
5.1.8 8 SWG GI wire m 500 29 14,500 15 7,500
5.1.9 1C x 4 Sqmm Cu flexible PVC Cable m 350 175 61,250 30 10,500

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

5.1.10 1C x 6 Sqmm Cu flexible PVC Cable m 150 225 33,750 50 7,500

5.1.11 1C x 16 Sqmm Cu flexible PVC Cable m 150 304 45,600 60 9,000
5.1.12 1C x 70 Sqmm Cu flexible PVC Cable m 75 1,241 93,075 85 6,375
Sleeved Multi strand CU earthing cable (for all junction boxes, receptacles, switches, lighting
5.1.13 m 500 32 16,000 35 17,500
fixtures.) single core 2.5 Sqmm green flexible.
Supply, installation & testing of Earth Bus with connection holes & mounting hardware,
5.2 support insulators etc as per specifications & as directed by site incharge.

5.2.1 50 x 3 x 300 mm, copper Earth Bus nos. 4 4,350 17,400 1,000 4,000
5.2.2 50 x 6 mm GI Earth Bus ( to be fabricated at site) nos. 14 1,130 15,820 310 4,340
Supply, installation & testing of Copper Plate type earth electrode (600x600x3 mm) with char
5.2.3 nos. 2 21,750 43,500 1,500 3,000
coal, salt, funnel, GI pipe & chamber with cover etc.
TOTAL EARTHING SYSTEM 818,345 301,405
6 LIGHTNING PROTECTION SYSTEM :
Lightning protection system complete in all respects for Plant building & other areas. This
consist of maintenance free pipe type earthing station, isolating link, horizontal conductors,
down conductors.
Supply, Installation, testing & Commissioning of vertical air terminal made of Aluminium,16
mm dia Rod of 2 mtr length including stand for fang fix system 16 kg with base and clamp
,made up of frost resistant concrete and tested upto 80-100KA lightning current,suitable for
6.1.1 Set 8 4,500 36,000 1,500 12,000
high wind load.,bi-metallic connection with the strip with all accessories as required complet
in all respects. as per IS-IEC -62305 part-3

Supply, Installation, testing & Commissioning of minimum 8 mm Dia Aluminium round

conductor on the parapet wall and terrace including the neccessary connecting
6.1.3 terminals,polymide roof holder for parapet & flat roof,T cross, cross universal connector for RM 820 160 131,200 175 143,500
connection with air termination network & downconductors complete in all respect as required
as per the site condition.
Supply, installation, testing and commissioning of minimum 10 mm dia.copper bonded round
conductor in column including diagonal clamp at every 2 mtrs complete in all respect as
6.1.4 RM 100 3,000 300,000 1,000 100,000
required as per the site condition. DIN EN 50164-2 (VDE 0185 part 202) & VDE 0185-305
(IS/IEC 62305)
Supply, installation, testing and commissioning of minimum 10 mm dia. GI round conductor
6.1.5 in ground complete in all respect as required as per the site condition. RM 50 2,500 125,000 900 45,000

Supply,Installation,Testing and commisioning of Test link, 250 x 60 mm x 100 mm GI box

with cover and provision to fix on the wall , suitable to connect 10mm round conductor both
6.1.6 No 5 3,500 17,500 850 4,250
side complete in all respect as required as per the site condition (Test link box IP-65.)

Supply, Installation, testing & Commissioning of Lightnig counter - To count no of lightning

strike & it can record the date and time of the lightning incident also tested as per IEC 62561-
6.1.7 Set 1 6,800 6,800 1,500 1,500
6 complete in all respect as required as per the site condition

Providing and laying of advance maintenance free earthing consisting of 14.35 mm dia and
3 meter length copper bonded earth rod in 150 mm dia. in an augured hole in ground ,
surrounded by ground enhancement material as per specification. Inspection chamber shall
be of 400 x 500 mm with concrete base CI manhole cover with frame painted with bitumastic
paint. 2 Nos. of 50 x 6 mm cross section & 300 mm long copper strip to be clamped with
copper claded rod electrode have sufficient nos ( But not less than 4 Nos.) of 10 mm dia. GI
nuts & bolts for connection to the equipment / interconnection to the other pits to form equi-
6.1.8 potential bonding .The pH value of ground enhance material shall be 6.9 to 7.2 of 1000gm / No. 4 16,200 64,800 7,800 31,200
lit @ 20 deg.c.The minimum 30 Kg of ground enhancement material shall provided for each
electrode. The complete earthing system shall be in accordance with IS 3043 and be provided
with required material complete in all respect as per site requirement.
Note : Warranty of Minimum 20 years shall be provided for maintaining the resistance.

Supply fixing, testing and commissioning of earth fixed point made of rust proof stainless
steel to connect earthing system airterminal and reinformcement, contact plate 79 mm, 10
6.1.9 Set 5 2,500 12,500 650 3,250
mm dia. clamping bolt,and plastic cover etc as required to complete the work.

TOTAL LIGHTING PROTECTION SYSYTEM 693,800 340,700

7 COMPUTER DATA NETWORKING & VOICE
(Bidder shall submit execution drawings prior to execution for approval to
Consultants)

7.1.1 Supply and laying of 4-Pair CAT-6 UTP cable Mtrs. 22,378 35 783,230 15 335,670
7.1.2 Supply and laying of 4-Pair CAT-6 A UTP cable Mtrs. - 65 - 18 -
Supply,installation,testing and commissioning of Cat-6 24 port Giga Patch max panel
7.1.3 Nos. 10.00 48,200 482,000 3,500 35,000
loaded,Modular jack panel of 1U
Supply,installation,testing and commissioning of Cat-6 16 port Giga Patch max panel
loaded,Modular jack panel of 1U ,16 Port Switch 10/100/1000 Mbps Unmanaged PoE Switch,
7.1.4 Nos. 6.00 35,200 211,200 3,000 18,000
802.3 af/at- Power Budget with 300 W Uplink 2x 10/100/1000 Base T+1x1 1000x Base
Combo
Supply, installation,testing and commissioning of CAT-6 7 feet patch cord(for work station)
7.1.5 Nos. 334 136 45,424 50 16,700
7.1.6 Supply, installation,testing and commissioning of CAT-6 4 feet patch cord Nos. 334 124 41,416 50 16,700
7.1.7 Supply,installation,testing and commissioning of 2 port face plate for I/O-White Nos. 334 165 55,110 100 33,400
Supply,installation,testing and commissioning of CAT-6 UTP Jack with strain relief and bend
7.1.8 Nos. 334 575 192,050 120 40,080
limiting boot-White (RJ 45 socket outlet)
7.1.9 Scanning and certification per node Nos. 334 30 10,020 10 3,340
Supply and laying of 25 mm. dia. medium duty rigid PVC conduits as required MMS
7.1.10 Mtrs. 750 36 27,000 30 22,500
7.1.11 Supply and laying of 2-Pair telephone cable Mtrs. 5,845 22 128,590 15 87,675
Supply,installation,testing and commissioning of telephone Jack with strain relief and bend
7.1.12 Nos. 167 433 72,311 150 25,050
limiting boot-White (RJ 11 socket outlet)
Supply,installation,testing and commissioning of telephone tag block with 50 pair krone with
7.1.13 Nos. 7 6,798 47,586 2,400 16,800
all necessary accessories
Supply and laying of HDMI cable to be laid in 32 mm dia. medium duty PVC conduit .
7.1.14 Mtrs. 120 221 26,520 60 7,200
Supply ,testing and commissioning of HDMI connectores with all necessary accessories.
7.1.15 Nos. 10 650 6,500 250 2,500
42 U Rack 800X1000mm with 4 fan, 4 Caster, 1 Cantilever Shelf,
7.1.16 1 Key Board Tray, 2 Cable Manager, 1 Hardware Packet, 6 Socket Dist. Nos. 1 92,758 92,758 35,800 35,800
2 Qty. 1 Earthing Strip -150mm Nickel Plating
6 U Wall Mount Rack with 1 Fan, Cable Manager, Hardware Packet, Dist. Box with all required
7.1.17 Nos. 7 8,500 59,500 1,200 8,400
access.
12 U Wall Mount Rack with 1 Fan, Cable Manager, Hardware Packet, Dist. Box with all
7.1.18 Nos. 7 13,000 91,000 1,500 10,500
required access.
TOTAL COMPUTER DATA NETWORKING & VOICE 2,372,215 715,315
DATA CABLE QUANTITY WILL BE AS PER SCANING REPORT

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

8 Light Fixtures & Celing Fan

Supply, installation, assembling, connection, testing & commissioning of fixtures complete
with suitable rating lamps, high power factor improving capacitor, HF Electronics Ballast,
starter and all other necessary accessories to complete the installations.

Supply, installation,testing and commisssioning of Fluroscent Suspended Tube Light fixtures

along with lamp, driver, electronics choke and all other necessary accessories to complete the
job.(Sample to be approved by client / architect) Colour shall be finalized by the NOs.
8.1.1 118 3,525 415,950 250 29,500 20
Architect/Client
25w Linear -4000k-suspended led (Panasonic,Light. 1200 mm 4 Feet/ LEGERO)(SUPPLY -
CLIENT SCOPE)
Supply, installation, testing and commissioning of Unidirectional Tube
along with lamp, electronic choke and all other necessary accessories to complete the job.
8.1.2 NOs. 5 444 2,220 150 750
(Sample to be approved by client / architect)(SUPPLY -CLIENT SCOPE)

Supply,installation,testing and commissioning of Cyrindrical Light Surface Mount along with

lamp, driver and all other necessary accessories to complete the job Colour shall be finalized
by the Architect/Client (Sample to be approved by client / architect) NOs.
8.1.3 5 3,734 18,668 250 1,250
18/20 watt recces mounting type LED Down Light fixture ( 4000K,Panasonic) (SUPPLY -
CLIENT SCOPE)

Supply,installation,testing and commissioning of Cyrindrical Light 12W COB along with lamp,
driver and all other necessary accessories to complete the job Colour shall be finalized by the
Architect/Client (Sample to be approved by client / architect) NOs.
8.1.4 5 3,932 19,658 250 1,250
18/20 watt recces mounting type LED Down Light fixture ( 4000K,Panasonic) Conceal light
(SUPPLY -CLIENT SCOPE)

Supply,installation,testing and commissioning of Cyrindrical Light of WALL Light fixture along

with lamp, driver and all other necessary accessories to complete the job Colour shall be
8.1.5 NOs. 31 810 25,110 100 3,100
finalized by the Architect/Client (Sample to be approved by client / architect) (Panasonic,)
(SUPPLY -CLIENT SCOPE)
Supply, Installation, Testing & Commissioning of LED recessed luminaire with LED(Light
Emitting Diode) system power: 32W, colour temperature of 4000K, neutral white 230V
constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient
LEDs, CRI>80, luminous flux of 3200 lm, electronic control gear, direct light emission, Sheet
8.1.6 Metal frame, polyester white powder coat applied over a 5-stage pre-treatment, opal NOs. 224 5,367 1,202,208 300 67,200
diffuser for glare-free uniform light,Protection class I, IP40, MacAdam 3, T.H.D≤ 10%, driver
efficiency ≥ 88%, surge protection of 2.5kV, Vendor To Supply Fixture With Remote Electronic
Power Supply & Required Mounting Accessories
PANEL light 600 X 600 (SUPPLY -CLIENT SCOPE) clean room fiiting

Supply, Installation, Testing & Commissioning of LED recessed luminaire with LED(Light
Emitting Diode) system power: 32W, colour temperature of 4000K, neutral white 230V
constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient
LEDs, CRI>80, luminous flux of 3200 lm, electronic control gear, direct light emission, Sheet
8.1.6 a Metal frame, polyester white powder coat applied over a 5-stage pre-treatment, opal NOs. 65 2,367 153,855 300 19,500
diffuser for glare-free uniform light,Protection class I, IP40, MacAdam 3, T.H.D≤ 10%, driver
efficiency ≥ 88%, surge protection of 2.5kV, Vendor To Supply Fixture With Remote Electronic
Power Supply & Required Mounting Accessories
PANEL light 600 X 600 (SUPPLY -CLIENT SCOPE) normal fittings

Supply, Installation, Testing & Commissioning of ( Decorative light ) Pendant luminaire

with with HPE (High Performance Efficiency) LED (Light Emitting Diode), system power: 36 W,
luminous flux of luminaire 3780 lm, Colour temperature of 4000 K, Neutral white, CRI > 80,
230V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy
efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder black
8.1.7 coloured coat applied over a 5- stage pre-treatment, Opal diffuser for a homogenous light NOs. 3 25,000 75,000 3,000 9,000
distribution ZHLS (Zero Halogen Low Smoke) internal wiring, Electronic control gear,
Protection class I, IP 20, Vendor To Supply Fixture With Remote Electronic Power Supply &
Required Mounting Accessories

Ø = 427 mm, H = 227 mm PL =1500 mm.

Supply, Installation, Testing & Commissioning of Bulkhead lighting fixture with 10 watts LED
8.1.8 NOs. 18 650 11,700 450 8,100
complete with all accessories as required.
Supply, Installation, Testing & Commissioning of (façade light ) LED light decorative type
8.1.8 fixture for building Facade. Vendor To Supply Fixture With Remote Electronic Power Supply & NOs. 5 12,500 62,500 650 3,250
Required Mounting Accessories.
Supply, Installation, Testing & Commissioning of surface mounted COVE LIGHT LED strip ,
with 120 LEDs per meter, 2835 SMD package with a thermal tape of high thermal convection
factor, system power: 6W/ meter, luminous flux 600 lm, color temperature of 4000 K, Neutral
White, CRI > 80, 12 V DC, constant voltage driving circuit, electronic control gear,Protection Class
8.1.9 II, IP20. Vendor To Supply Fixture With Remote Electronic Power Supply & Required Mtrs. 300 1,800 540,000 120 36,000
Mounting Accessories

L = 1000 mm, H = 10 mm, B = 1.4 mm

Supply Installation, testing, & commissioning of 1200 mm sweep ceiling fan BLDC
1000 mm down rod with canopies. 5 star rated along with required all accessories (WITH
8.1.10 NOs. 14 3,650 51,100 850 11,900
EXTENNDED ROD AS REQUIRED) (SUPPLY -CLIENT SCOPE)

Supply Installation, testing, & commissioning of 150 mm sweep exhaust fan with frame & bird
8.1.11 protection louvers including all hardware etc . Complete as reuired . (SUPPLY -CLIENT SCOPE) NOs. 10 1,850 18,500 500 5,000

Supply Installation, testing, & commissioning of 250 mm sweep exhaust fan with frame & bird
8.1.12 protection louvers including all hardware etc . Complete as reuired . ( WITH OCCUPANCY NOs. 10 2,850 28,500 650 6,500
SENSOR ) (SUPPLY -CLIENT SCOPE)
TOTAL Light Fixtures & Celing Fan 2,624,968 202,300

9 CLOSED CIRCUIT TELEVISION SYSTEM (CCTV)

2MP Indoor Dome Network Camera 1/2.8" Progressive Scan CMOS
1920 X 1080@30fps, 2.8mm fixed lens, Color: 0.01 Lux @ (F1.2, AGC ON),
9.1.1 0.028 Lux @(F2.0, AGC ON);H.265+, H.264+, H.264, 120 dbWDR, 2 NOs. 10 3,980 39,800 700 7,000
Behavior analyses, BLC/3D DNR/ROI, Built-in micro SD/SDHC/SDXC
card slot, up to 128 GB.
2MP Indoor Bullet Network Camera 1/2.8" Progressive Scan CMOS
1920 X 1080@30fps, 2.8mm fixed lens, Color: 0.01 Lux @ (F1.2, AGC ON),
9.1.2 0.028 Lux @(F2.0, AGC ON);H.265+, H.264+, H.264, 120 dbWDR, 2 NOs. 55 4,500 247,500 700 38,500
Behavior analyses, BLC/3D DNR/ROI, Built-in micro SD/SDHC/SDXC
card slot, up yo 128 GB.
NVR 64 CH, 320 Mbps bandwidth 8 SATA Interfaces, 1 eSATA Interface,
9.1.3 NOs. - 135,000 - 8,300 -
RAID 0/1/5/6/10, 2 Giga Network Interfaces.
NVR 32 CH, 320 Mbps bamdwidth, 8 SATA Interfaces, 1 eSATA interfaces,
9.1.4 NOs. 2 80,320 160,640 6,700 13,400
RAID 0/1/5/6/10, 2 Giga Network Interfaces.

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

NVR 16 CH, 320 Mbps bamdwidth, 8 SATA Interfaces, 1 eSATA interfaces,

9.1.4 NOs. 4 60,530 242,120 5,000 20,000
RAID 0/1/5/6/10, 2 Giga Network Interfaces.
Enterprise Class 24 TB SATA HDD for NVR (Considering 30 Days recording
9.1.5 NOs. 5 13,622 68,110 2,043 10,215
with RAID 5 HDD Redundancy Configuration).
Supply, teting, tagging, laying and commissioning of Cat 6 cable in PVC
9.1.6 Mtrs. 4,420 65 287,300 30 132,600
pipe as required complete with clamps for fixing tagging etc.
TOTAL CLOSED CIRCUIT TELEVISION SYSTEM (CCTV) 1,045,470 221,715

10 PUBLIC ADDRESS SYSTEM ( PA SYSTEM)

Supply, installation, testing and Commissioning of the following
system as per the technical specification.
Supply, Installation, Testing and Commissioining of PA System controller complete with 6
Zone Call Station with 6 zone Router, Stem Type Microphone, 2mm thick CRCA Sheet Powder
Coated Rack, Dual Tone Control foe Speech & Music, integration facility with Fire Alarm
10.1.1 System,tone generator & Speech Processor with relays for activating tone & pre-recorded fire NOs. 1 95,712 95,712 11,400 11,400
alarm messages, facility to intregrate with base builder.The rate inclusive of Periarity module
selector switch etc.

Supply, Installation, Testing and Commssioining of 6 W Ceiling Mounted

10.1.2 NOs. 60 950 57,000 200 12,000
Speakers with line matching transformers & selectedable.
Supply, Installation, Testing and Commssioning of Rack Mounted minimum
10.1.3 NOs. 1 33,990 33,990 2,000 2,000
500 W Power Amplifire.
10.1.4 Operator Console NOs. 1 17,304 17,304 2,400 2,400
Supply, Installation, Testing and Commssioning of Micro phone unit with
10.1.6 NOs. 1 28,034 28,034 2,500 2,500
back box.
Supplying, installing, testing and commissioning of 1 No. each of AM/FM
Tuner, DVD player with overriding facility, Music Source Selector, with
10.1.7 SET 1 11,742 11,742 1,800 1,800
assignable priority on each channel to accept Music, Telephone, Microphne,
Recorded messges from Voice recorder etc. with in built comprossor and limiter
10.1.8 Auto dialar for intefrating with Fire alarm system SET 1 8,034 8,034 1,140 1,140
10.1.9 15U rack for mounting all the above Equipment NOs. 1 15,000 15,000 1,800 1,800
10.1.10 Emergency Voice Communication system: NOs. 5 30,900 154,500 4,200 21,000
Supply, installation, testing and Commissioning of Auto voice announcer
10.1.11 NOs. 1 6,798 6,798 660 660
with Auto telephone dialer unit
10.1.12 MIKE with operating console at reception NOs. 1 52,540 52,540 3,200 3,200
TOTAL PUBLIC ADDRESS SYSTEM ( PA SYSTEM) 480,654 59,900

11 Fire Stopper System For Electrical Shafts

Fire Stopper - -
SITC of Fire stop mortar system CP 636 , with minimum 2 hours fire rating when tested in
accordance with UL 1479/ASTM-E 814 standards, for horizontal openings in floors or slabs after
passing service lines like cables/cable bundles, cable trays etc. The mortar shall be a light weight
cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11
(Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for
seismic zone 4. The product shall be age tested as per Dafstb and DIBT standards. The product
shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96. The
product shall be age tested as per Dafstb and DIBT standards.The system shall be UL listed &
classified and product shall bear the UL and FM approval logo on the packing. If none of UL test
certificate comply with actual application, an EJ document prepared by a qualified personnel and
based on nearest third party tested & approved systems like UL test boards enclosures shall have
11.1 an etched zinc base stove painted followed by synthetic stoved enamel, colour light gray. m2 50.00 3,200 160,000 1,200 60,000
All distribution boxed shall be made by approved/licenses MCB/DP manufacturer. The bus bar shall
be such that circuit could be isolated easily. Neutral bus bars shall be provided with the same
number of terminals, as there are single ways on the board, in addition to the terminals for
incoming mains. An earth bar of similar size at the neutral bar shall also be provided.LT panel.iality
Contractor needs to submitt work completition certificate along with installation report through Hilti
documentation Software CFS DM for periodic inspection & maintenance purpose. The gaps around
inaccessible or complicated openings shall be sealed with exapnding firestop foam CP 620 and
shall be paid under separate heads and as mentioned below.

Fabrication :
Supply, fixing and fabrication of cable tray supports, cable trestles with MS angles and
channels with supports and applying paint as per trailing description & as per instruction of
Engineer. Cable tray shall be fixed by means of insert plate anchor fastener or grouted of MS
11.2 supports, angles or from truss bottom with supports etc. in fabricated condition. Included of kg 1,000 85 85,000 32 32,000
all hardware and consumables including including Receipt, unloading, loading & Storage. The
item will also include fixing of Chequere plates to cover the remaining portions of cable trench
in substations after fixing of panels.The painting specs are given below.

TOTAL Fire Detection and Alarm System 245,000 92,000

12 ACCESS CONTROL SYSTEM (ACS) & TIME ATTENDANCE SYSTEM
SITC OF CAT 6 Cable required for Acccesss Control system the job to be complete with all requried
12.1 MTR 1,000 65 65,000 35 35,000
accessories and as specified in drawings. (passive cabling )
TOTAL ACS & TIME ATTENDANCE 65,000 35,000
13 Miscellaneous
A Engineering & System Requirements
1 Relay testing and co-ordination Lot 1 8,500 8,500 1,500 1,500
2 Statutory charges for the total electrical infrastructure works Lot 1 15,200 15,200 1,500 1,500
B Safety Equipment - - -
Supply and laying of flame retardant LT rubber mat (1.1 kV rms, 2m X 1m) in front of LT
1 nos 2 2,200 4,400 1,500 3,000
panels and APFC panels as per provisions of IS 15652:2006.
2 Supply and fixing of A0 size laminated SLD. nos 1 3,500 3,500 1,500 1,500
Supply and fixing of shock treatment chart (A2 Size) in English & Regional Language.
3 nos 7 5,500 38,500 1,500 10,500
4 Supply and providing of first aid box nos 14 2,500 35,000 1,500 21,000
Supply and fixing of danger notice board for LV installation of size 150 x 150 mm.
5 nos 7 450 3,150 1,500 10,500
Providing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out
6 nos 7 8,000 56,000 1,500 10,500
on glass for treatment of person suffering from Electric shock.
TOTAL 164,250 60,000
TOTAL SUPPLY BILL AMOUNT 28,041,406
TOTAL INSTALLATION BILL AMOUNT 5,640,922
TOTAL AMOUNT SUPPLY & LABOUR (WITHOUT GST) 33,682,328
NOTES
1) This BOQ is prepared based on available inputs (i.e. Equipment list, Equipment layout, plot plant etc.)
2) Contractor has to refer latest revision of drawings and documents for execution. Final drawings shall be issued after award of contract.

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

RODENT REPELLENT SYSTEM & WATER LEAKAGE DETECTION SYSTEM BILL OF QUANTITY
Supply Installation Remarks
S. No. Item Description UOM Qty.
Rate (INR) Total (INR) Rate (INR) Total (INR)

1.0 RODENT REPELLENT SYSTEM

1.1 Supply installation testing and commissioning of RS485 Each
based Controller for active control over transducer &
functioning of system. The maximum coverage for single
3 27,500 82,500 4,300 12,900
controller among two operating rooms is approx 150m.
Controlling upto 20-24 Transducer.

1.2 Supply installation testing and commissioning of Each

Ultrasonic Rodent Repellet Transducers (coverage of 150sqft) 3 16,750 50,250 3,200 9,600

1.3 Supply installation testing and commissioning of MS Powder Pack

3 1,400 4,200 860 2,580
coated Stand Bracket et
1.4 Supply installation testing and commissioning of Electrical Nos.
Cables in 20 MM PVC Conduit for trsnducer to controller. 3 18,000 54,000 6,000 18,000
(approx length of 250mtrs)
TOTAL 190,950 43,080
2.0 WATER LEAK DETECTION SYSTEM
Supply installation testing and commissioning of 2 Zone
Hybrid Control Panel with LCD Keypad to make 2 Zone
2.1 for identification of Water Leakage in the Specific Zone Each 1 46,750 46,750 3,000 3,000
complete with transformer & cabinet and 1 x 7AH battery

Supply installation testing and commissioning of Water

leak detection module. Each Zone will have a separate Module
2.2 Each 2 41,250 82,500 3,000 6,000
to Identify the Leakage in specific Zone

2.3 Supply installation testing and commissioning of 15 Mtrs. Each

4 10,395 41,580 1,125 4,500
Length water leak detection cable
2.4 Supply installation testing and commissioning of Electronic Each
1 9,500 9,500 3,000 3,000
Hooter
2.5 Supply installation testing and commissioning of LV Mtrs
Electric 2CX1.5sqmm armoured cable for Hooter to controller 100 35 3,500 35 3,500
& module.
TOTAL 183,830 20,000

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

UPS BILL OF QUANTITY

S. No. Item Description UOM Qty. Supply Installation Remarks
Rate Total
Rate (INR) Total (INR)
(INR) (INR)

17 UPS System

Supply, Installation, Testing and Commissioning of 20 KVA high performance fully

microprocessor controlled (Three phase Input & Three phase Output) online UPS system
suitable for input voltage 360 to 460 and output voltage 400 ± 1 voltage. The UPS shall have
inbuilt isolation transformer at inverter output. The UPS shall be provided in powder coated
fan cooled enclosure painted in colour as per specifications. The UPS shall be suitable for
normal, emergency, recharge, by-pass and maintenance mode. The UPS shall have a
microprocessor based display and control panel.UPS shall have own batteries with 30 minute
1.0
battery back-up. Complete system must be provided as per specifications and as per site
requirement including inter connecting copper cables from battery to UPS, UPS to panel etc.&
supports for complete system as approved by the Engineer in charge/ Consultant.
FIFTH FLOOR OFFICE

20 KVA Online UPS System with 30 minutes battery back-up Set 1 242,400 242,400 45,000 45,000

Supply, Installation, Testing and Commissioning of 15 KVA high performance fully

microprocessor controlled (Three phase Input & Three phase Output) online UPS system
suitable for input voltage 360 to 460 and output voltage 400 ± 1 voltage. The UPS shall have
inbuilt isolation transformer at inverter output. The UPS shall be provided in powder coated
fan cooled enclosure painted in colour as per specifications. The UPS shall be suitable for
normal, emergency, recharge, by-pass and maintenance mode. The UPS shall have a
microprocessor based display and control panel.UPS shall have own batteries with 30 minute
2.0
battery back-up. Complete system must be provided as per specifications and as per site
requirement including inter connecting copper cables from battery to UPS, UPS to panel etc.&
supports for complete system as approved by the Engineer in charge/ Consultant.
FIRST FLOOR OPD

15 KVA Online UPS System with 30 minutes battery back-up. Set 1 207,000 207,000 40,000 40,000

Supply, Installation, Testing and Commissioning of 180 KVA high performance fully
microprocessor controlled (Three phase Input & Three phase Output) online UPS system
suitable for input voltage 360 to 460 and output voltage 400 ± 1 voltage. The UPS shall have
inbuilt isolation transformer at inverter output. The UPS shall be provided in powder coated
fan cooled enclosure painted in colour as per specifications. The UPS shall be suitable for
normal, emergency, recharge, by-pass and maintenance mode. The UPS shall have a
microprocessor based display and control panel.UPS shall have own batteries with 30 minute
3.0
battery back-up. Complete system must be provided as per specifications and as per site
requirement including inter connecting copper cables from battery to UPS, UPS to panel etc.&
supports for complete system as approved by the Engineer in charge/ Consultant. BSL LAB II
, BSL LAB II+ & BSL III LAB (N +1 CONFIGURATION )

180 KVA Online UPS System with 15 minutes battery back-up. Set 2 1,832,000 3,664,000 50,000 100,000

TOTAL 4,113,400 185,000

TOTAL UPS 4,298,400 -

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

DISEL GENERATOR BILL OF QUANTITY

S. No. Item Description UOM Qty. Supply Installation Remarks
Rate
Rate (INR) Total (INR) Total (INR)
(INR)

16 DIESEL GENERATOR SET

Loading,unloading,shifting, SITC of 320KVA DG Set With control panel in
Built - 4 Pole Breaker to be erected on Ready foundation on ground (0.450 mtr
lvl). Neutral grounding connections to be made, Neutral earthing, First fill of
Lub oil and Min 100 Ltr Diesel for commissioning to be provided. (GA of the
DG & Drg shall be provided for Approval), Refer Technical specification &
16.1 data Sheets,. also Scope Shall incuding as below as per EI guideline complete to NOs. 2 2,706,250 5,412,500 130,000 260,000
be erected. as required as per site condition. ( DG LOCATION IS ON
TERRACE)

Generation Voltage- 3 Ph, 415 V , 50 Hz, Rated Output -320 KVA

Fuel- Diesel ( low sulphur)
Prime Mover - Diesel Engine
Engine Cooling - Water Cooled
Isolator in Built - .4 Pole Isolator with dispay parameters and multi function
Meter
Weather Proof Acoustic canopy/enclosure – As per latest CPCB Norms
Auxiliaries / systems – as mentioned in this Specs.
Cable Box extension with Al bus bar to terminate cables up to Isolator size –1C
X 300 sq. mm AL Arm Cable X 2 Runs Per Ph.
Engine supplied should be Four Stroke, Self Start,Direct Injection,Inline
Construction, Water Cooled, Turbo charged, and IN-LINE Engine shall also
have electronic engine controller.
Alternator supplied should be Brushless, Single / Two bearings, Self-excited and
Self-regulated, 3 Phase, 4 Wire, 415 V, 50 Hz, 0.8 Power Factor, Enclosure-
SPDP, Class F/H Insulation, provided with Automatic Voltage Regulator to
hold the output voltage constant better than (+/- 1%) and provide fast response
to sudden load changes.
The alternator shall be designed, built and tested to comply with or latest IS BS
or equivalent standards.
Local Control panel for starting the engine on Auto/Manual Mode comprising of
the Frequency meter, radiator temp. Indicator, battery voltage & current meter.
The Local Control panel must be supplied with the Outdoor Type IP% Junction
Box with adequate connectors (prefabally of Elmax / Connectwell make) to
accomplish the automation of the DG Set with help the AMF module mounted
inside Main LT panel.

Supply, installation, testing & commissioning of 990 liters capacity day oil
storage tank (External) fabricated from 4 mm thick MS plates. Tank shall
include 450 mm manhole cover, level indicator with duly calibrated scale and
flanged connection for inlet, outlet, overflow, drain and probe provision for
level controller & breather.
SITC of D.G. Exhust Pipe for above D.G. with silencer, insulation, cladding &
adequate supporting, clamps to take out the flute to safe location. Complete as
16.2 required as per Specification given in Tender Document & as per PWD Mtrs. 15 2,500 37,500 1,650 24,750
guideline & site condition.
Supply, erection, testing and commissioning of DG Syncronising panel as
suitble for above 3 DG as per IS Specifications and respective drawings and
Final approval from cosultants (All Breakers should be 4 poles and equipped
with MFM and LM as required.Meters should be with RS485. One Changover
16.3 switch should be implemented in contol logic for emergency application. The NOs. 1 1,253,000 1,253,000 65,000 65,000
Panel has to be as per company standard and ;latest norms with CPRI approved.
( AS PER SLD)

TOTAL DISEL GENERATOR - -

TOTAL DG 6,703,000 349,750

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
 YRG RESEARCH LAB

SOLAR SYSTEM BILL OF QUANTITY

S. No. Item Description UOM Qty. Supply Installation Remarks
Total
Rate (INR) Total (INR) Rate (INR)
(INR)

19.0 SOLAR SYSTEM (ROOF TOP)

Supply of 60 KWp Grid Connected Roof-top Solar Photovoltaic Set
System based on heterojunction technology solar PV module as per
the scope defined in the tender specifications.(185 Panel of 325W
each).Complete as required . (Including of Liasoning & all required 1 3,835,000 3,835,000 295,000 295,000
accessories like metering , )

Installation, Commissioning & Testing of 60 KWp Grid Connected

Rooftop Solar Photovoltaic System based on HIT solar PV module -
including all xpenses (to be borne by bidder) e.g. Air Fare, Local
Transport, accommodation etc. with Designing, Supplying,
Fabricating and installation of MS fabricated structure / support
complete with welding, grouting and painting etc.complete with all
necessary hardware and as per the instruction of the Engineer in
charge / Architect /Consultant. Complete as required

TOTAL 3,835,000 295,000

Shreeya Consulting Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045.India. www.spap.in email- info@spap.in m- 7447753085
5B: BILL OF QUANITIES
(HVAC WORKS)

Page 315 of 316

 YRG CARE
CHENNAI
TAMIL NADU

Summary Sheet - HVAC Works

Sr. No. Scope Description Total Amount
A GROUND FLOOR ₹ 1,34,000
B FIRST FLOOR ₹ 27,03,175
C FIFTH FLOOR ₹ 30,88,825
D SIXTH FLOOR ₹ 28,42,900
E SEVENTH FLOOR ₹ 91,14,550
SUB TOTAL ₹ 1,78,83,450
Design Contingency ₹ 8,94,173
TOTAL ₹ 1,87,77,623

A Exclusions:
1 GST.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Item Supply Installation

Scope Description Quantity Unit
No. Unit Cost Cost Total Unit Cost Cost Total
A GROUND FLOOR
A1 SPLIT SYSTEM
Section-I : Highside Items (Imported)
Supply, Installation, Testing and Commissioning of Split Cassette, Outdoor Units, with R410 A
or R32 or R407 Refrigerant,Hermitically sealed Rotary Compressors, Special Precoated Fins,
1 Panel, Corrosion resistant coated Condenser, Condenser Fan, M.S.Hot Dip Galvanised stands
/ supports etc., Indoor Units with Pumping Kit, Fresh Air connection, Brackets / Hangers,
Supports and following minimum Cooling capacities.
2.02 TR : Lobby Area 1 No. ₹ 55,000 ₹ 55,000 Included
2 Supply & Installation of :
3 Cordless Remote Controller 1 No. ₹ 3,500 ₹ 3,500 Included
4 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-I ₹ 58,500 Included
Section-II : Lowside Items (Indegenous)
All Refrigerant (Cu) Piping along with fittings, hangers, trays and supports etc. between Indoor
5
& Outdoor Units duly Class 'O' insulated as per specifications.
5.1 Gas Piping with 19 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 15.9 mm 20 RMT ₹ 750 ₹ 15,000 Included
5.2 Liquid Piping with 13 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 9.5 mm 20 RMT ₹ 450 ₹ 9,000 Included
C-PVC Drain Piping duly insulated with 6 mm Nitrile Rubber / EPDM / XLPE Class 'O' with
6
supports, from Indoor Unit to nearest drain point.
25 mm 20 RMT ₹ 150 ₹ 3,000 Included
7 Communication Cabling between Outdoor Units and Indoor Units in FRLS PVC Conduit 40 RMT ₹ 150 ₹ 6,000 Included
8 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-II ₹ 33,000 Included
TOTAL OF SPLIT SYSTEM ₹ 91,500 Included
A2 TOILET & OTHER VENTILATION SYSTEM
1 Exhaust Air System includes Supply, Installation, Testing and Commissioning of following:
Powder Coated / Anodised Extruded Aluminum Outlet Louver with Insect screen as per
1.1
specifications
400 mm X 200 mm 1 No. ₹ 1,000 ₹ 1,000 Included
Ceiling Suspended Exhaust Air Inline Fan with Canvas connections suitable as per
1.2
specifications
300 CFM Vs 15 mm Static 1 No. ₹ 25,000 ₹ 25,000 Included
Wall Mounted Exhaust Air Propeller Fan, with Gravity Louver 375 mm X 375 mm, suitable as
1.3
per specifications
100 CFM Vs 10 mm Static 1 No. ₹ 8,000 ₹ 8,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Factory Fabricated G.I. Exhaust Air Duct with flanges, supports etc.as per approved Shop
1.4
drawings, Specifications and SMACNA standards
24 Gauge (0.63 mm Thick) 10 SqM ₹ 750 ₹ 7,500 Included
1.5 13 mm Thick Nitrile / EPDM Rubber / XLPE Class 'O' Insulation for G.I. Exhaust Air duct RO SqM - - - -
Power Coated Extruded Aluminum, Exhaust Air Grill with Volume Control Damper, as per
2
specifications
300 mm X 300 mm 1 No. ₹ 1,000 ₹ 1,000 Included
3 Any Other Item the Contractor wants to add for the completion of the Project.
TOTAL OF TOILET & OTHER VENTILATION SYSTEM ₹ 42,500 Included
TOTAL OF GROUND FLOOR ₹ 1,34,000 Included
B FIRST FLOOR
B1 VARIABLE REFRIGERANT FLOW (VRF) SYSTEM
Section-I : Highside Items (Imported)
Supply, Installation, Testing and Commissioning of Modulating Outdoor Units, with R410 A
Refrigerant, Multi Scroll Compressors (all Variable), Special Precoated Fins, Panel, Corrosion
resistant coated Condenser, Inverter based Condenser Fan, M.S. Hot Dip Galvanised stands /
1
supports, Electrical & Microprocessor Panel, Isolating Valves and all the necessary accessories
for proper functioning of the Units, and compatible to operate in Cooling mode at 42 deg C
ambient conditions, with following minimum Cooling capacities.
1.1 61.5 KW (17.49 TR) : System-01 (First Floor) (Top Discharge) 1 No. ₹ 4,50,000 ₹ 4,50,000 Included
1.2 33.5 KW (9.52 TR) : TFA-01 (First Floor) (Side Discharge) 1 No. ₹ 2,75,000 ₹ 2,75,000 Included
Note : Contractor should consider deration as per conditions mentioned in Specifications.
After deration, Unit capacities and sizes have to be checked at site. So Contractor to visit site
to check feasibility for ODU placement before bidding.
Supply, Installation, Testing and Commissioning of Indoor Units with Remote and all
2
accessories, Hangers / Brackets & Supports.
Ceiling Suspended 4 Way Regular Cassette Units with Drain Pump kit, Power Pintop, and
2.1
Fresh Air connections etc.
2.1.1 5.6 KW (1.6 TR) Vs 812 CFM 2 Nos. ₹ 36,000 ₹ 72,000 Included
2.1.2 3.6 KW (1.02 TR) Vs 459 CFM 3 Nos. ₹ 32,000 ₹ 96,000 Included
Ceiling Suspended 4 Way Mini Cassette Units with Drain Pump kit, Power Pintop, and Fresh
2.2
Air connections etc.
2.2.1 2.8 KW (0.8 TR) Vs 318 CFM 4 Nos. ₹ 35,000 ₹ 1,40,000 Included
2.3 Ceiling Suspended 1 Way Cassette Units with Drain Pump kit, Power Pintop etc.
2.3.1 7.1 KW (2.02 TR) Vs 614 CFM 4 Nos. ₹ 45,000 ₹ 1,80,000 Included
2.3.2 3.6 KW (1.02 TR) Vs 342 CFM 4 Nos. ₹ 38,000 ₹ 1,52,000 Included
2.4 Ceiling Suspended Treated Fresh Air Units with Drain Pump kit, and Power Pintop etc.
2.4.1 28.0 KW (8.0 TR) Vs 1377 CFM 1 No. ₹ 2,00,000 ₹ 2,00,000 Included
3 Supply & Installation of All Refrigerant Joints (Refnets) for both lines 32 Nos. ₹ 3,000 ₹ 96,000 Included
4 Supply & Installation of :

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

4.1 Cordless Remote Controller (Cassette/Hiwall) 17 Nos. ₹ 3,500 ₹ 59,500 Included

4.2 Corded Remote Controller (TFA) 1 No. ₹ 3,500 ₹ 3,500 Included
Computer Controlled Network System for monitoring & controlling all Indoor & Outdoor
4.3 Units, Central point including all software & cabling (I-Manager) / I Touch Central Controller, RO Nos. - - - -
with BacNet support, compatible to third party BMS
5 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-I ₹ 17,24,000 Included
Section-II : Lowside Items (Indegenous)
All Refrigerant (Cu) Piping along with fittings, hangers, trays and supports etc. between Indoor
6
& Outdoor Units duly Class 'O' insulated as per specifications.
6.1 Gas Piping with 19 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 41.3 mm RO RMT - - - -
Ø 38.1 mm RO RMT - - - -
Ø 34.9 mm 10 RMT ₹ 1,950 ₹ 19,500 Included
Ø 31.8 mm RO RMT - - - -
Ø 28.6 mm 20 RMT ₹ 1,500 ₹ 30,000 Included
Ø 25.4 mm RO RMT - - - -
Ø 22.2 mm 5 RMT ₹ 1,000 ₹ 5,000 Included
Ø 19.1 mm 15 RMT ₹ 850 ₹ 12,750 Included
Ø 15.9 mm 40 RMT ₹ 750 ₹ 30,000 Included
Ø 12.7 mm 35 RMT ₹ 600 ₹ 21,000 Included
Note : For exposed piping insulation thickness should be 38mm, as per technical specification.
6.2 Liquid Piping with 13 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 22.2 mm RO RMT - - - -
Ø 19.1 mm 10 RMT ₹ 800 ₹ 8,000 Included
Ø 15.9 mm 5 RMT ₹ 650 ₹ 3,250 Included
Ø 12.7 mm 15 RMT ₹ 525 ₹ 7,875 Included
Ø 9.5 mm 60 RMT ₹ 450 ₹ 27,000 Included
Ø 6.4 mm 35 RMT ₹ 350 ₹ 12,250 Included
Note : For exposed piping insulation thickness should be 26mm, as per technical specification.
C-PVC Drain Piping duly insulated with 6 mm Nitrile Rubber / EPDM / XLPE Class 'O' with
7
supports, from Indoor Unit to nearest drain point
50 mm 50 RMT ₹ 250 ₹ 12,500 Included
32 mm 25 RMT ₹ 200 ₹ 5,000 Included
25 mm 45 RMT ₹ 150 ₹ 6,750 Included
8 Communication Cabling between Outdoor Units and Indoor Units in FRLS PVC Conduit 250 RMT ₹ 150 ₹ 37,500 Included
9 Additional Charge of R410 A Gas & Compressor Oil for 2 Nos. of ODU's and 18 Nos. of IDU's 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Design, Supply, Installation, Testing and Commissioning of Power Distribution Panel with
mounting arrangements, Incoming and Outgoing MCCB / MCB, Indication of Voltage, Current
& Power, Phase Indicating Lights, Contactor / Over load Relay with built in Single Phase
10
preventor, Power Factor Improvement (Lagging) close to Unity with selection of capacitor
bank in the ratio of 1 / 2 / 4 / 8 / 8 and Remote Start / Stop facility for all Starters, Auto /
Manual Switch and Intelligent Power Meter, suitable for Outdoor Installation (IP 65).
10.1 2 Nos. VRF ODU (VRF System-01, TFA-01) and spares 1 No. ₹ 2,50,000 ₹ 2,50,000 Included
Power Cabling & Earthing as per specifications between Panel and all Equipment with
11 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included
hangers, supports, and trays etc. all Equipment with hangers, supports, and trays etc.
12 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-II ₹ 6,88,375 Included
TOTAL OF VARIABLE REFRIGERANT FLOW (VRF) SYSTEM ₹ 24,12,375 Included
B2 FRESH AIR SYSTEM AND ITS ASSOCIATED WORKS
1 Fresh Air System includes Supply, Installation, and Testing of following :
Powder Coated / Anodised Extruded Aluminum Inlet Louver with Insect screen as per
1.1
specifications
1000 mm X 300 mm 1 No. ₹ 2,500 ₹ 2,500 Included
20 mm Thick Pre Insulated Duct (PUF/PIR) with flanges, supports etc. as per approved Shop
1.2 120 SqM ₹ 1,500 ₹ 1,80,000 Included
drawings, Specifications and SMACNA standards (Rectangular Shape) for Fresh Air.
1.3 Duct / Constant Flow Controller for Fresh Air balancing
80 CMH 3 Nos. ₹ 1,500 ₹ 4,500 Included
65 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
55 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
50 CMH 2 Nos. ₹ 1,500 ₹ 3,000 Included
45 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
35 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
1.4 Insulated Flexible connection between Indoor Units and DFC
Ø 150 mm 9 RMT ₹ 300 ₹ 2,700 Included
1.5 Metallic Clamps for Flexible connections
Ø 150 mm 18 Nos. ₹ 200 ₹ 3,600 Included
Powder Coated Extruded Aluminum, Fresh Air Diffuser with removable core and with Volume
1.6
Control Damper, as per specifications
300 mm X 300 mm 6 Nos. ₹ 2,000 ₹ 12,000 Included
Powder Coated Extruded Aluminum, Fresh Air Grill with Volume Control Damper, as per
1.7
specifications
150 mm X 150 mm 8 Nos. ₹ 750 ₹ 6,000 Included
2 Any Other Item the Contractor wants to add for the completion of
the Project
TOTAL OF FRESH AIR SYSTEM ₹ 2,20,300 Included
B3 TOILET & OTHER VENTILATION SYSTEM

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

1 Exhaust Air System includes Supply, Installation, Testing and Commissioning of following:
Powder Coated / Anodised Extruded Aluminum Outlet Louver with Insect screen as per
1.1
specifications
300 mm X 200 mm 1 No. ₹ 1,000 ₹ 1,000 Included
Ceiling Suspended Exhaust Air Inline Fan with Canvas connections suitable as per
1.2
specifications
250 CFM Vs 15 mm Static 1 No. ₹ 25,000 ₹ 25,000 Included
Wall Mounted Exhaust Air Propeller Fan, with Gravity Louver 375 mm X 375 mm, suitable as
1.3
per specifications
200 CFM Vs 10 mm Static 1 No. ₹ 12,000 ₹ 12,000 Included
150 CFM Vs 10 mm Static 2 Nos. ₹ 12,000 ₹ 24,000 Included
Factory Fabricated G.I. Exhaust Air Duct with flanges, supports etc.as per approved Shop
1.4
drawings, Specifications and SMACNA standards
24 Gauge (0.63 mm Thick) 10 SqM ₹ 750 ₹ 7,500 Included
1.5 13 mm Thick Nitrile / EPDM Rubber / XLPE Class 'O' Insulation for G.I. Exhaust Air duct RO SqM - - - -
Power Coated Extruded Aluminum, Exhaust Air Grill with Volume Control Damper, as per
2
specifications
300 mm X 300 mm 1 No. ₹ 1,000 ₹ 1,000 Included
3 Any Other Item the Contractor wants to add for the completion of the Project.
TOTAL OF TOILET & OTHER VENTILATION SYSTEM ₹ 70,500 Included
TOTAL OF FIRST FLOOR ₹ 27,03,175 Included
C FIFTH FLOOR
C1 VARIABLE REFRIGERANT FLOW (VRF) SYSTEM
Section-I : Highside Items (Imported)
Supply, Installation, Testing and Commissioning of Modulating Outdoor Units, with R410 A
Refrigerant, Multi Scroll Compressors (all Variable), Special Precoated Fins, Panel, Corrosion
resistant coated Condenser, Inverter based Condenser Fan, M.S. Hot Dip Galvanised stands /
1
supports, Electrical & Microprocessor Panel, Isolating Valves and all the necessary accessories
for proper functioning of the Units, and compatible to operate in Cooling mode at 42 deg C
ambient conditions, with following minimum Cooling capacities.
1.1 90.0 KW (25.59 TR) : System-5 (Fifth Floor) (Top Discharge) 1 No. ₹ 6,50,000 ₹ 6,50,000 Included
1.2 33.5 KW (9.52 TR) : TFA-07 (Fifth Floor) (Side Discharge) 1 No. ₹ 2,75,000 ₹ 2,75,000 Included
Note : Contractor should consider deration as per conditions mentioned in Specifications.
After deration, Unit capacities and sizes have to be checked at site. So Contractor to visit site
to check feasibility for ODU placement before bidding.
Supply, Installation, Testing and Commissioning of Indoor Units with Remote and all
2
accessories, Hangers / Brackets & Supports.
Ceiling Suspended 4 Way Regular Cassette Units with Drain Pump kit, Power Pintop, and
2.1
Fresh Air connections etc.
2.1.1 7.1 KW (2.02 TR) Vs 830 CFM 6 Nos. ₹ 38,000 ₹ 2,28,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Ceiling Suspended 4 Way Mini Cassette Units with Drain Pump kit, Power Pintop, and Fresh
2.2
Air connections etc.
2.2.1 2.8 KW (0.8 TR) Vs 318 CFM 4 Nos. ₹ 35,000 ₹ 1,40,000 Included
2.3 Ceiling Suspended 2 Way Cassette Units with Drain Pump kit, Power Pintop etc.
2.3.1 3.6 KW (1.02 TR) Vs 406 CFM 2 Nos. ₹ 32,000 ₹ 64,000 Included
2.4 Ceiling Suspended 1 Way Cassette Units with Drain Pump kit, Power Pintop etc.
2.4.1 7.1 KW (2.02 TR) Vs 614 CFM 5 Nos. ₹ 45,000 ₹ 2,25,000 Included
2.5 Ceiling Suspended Treated Fresh Air Units with Drain Pump kit, and Power Pintop etc.
2.5.1 28.0 KW (8.0 TR) Vs 1377 CFM 1 No. ₹ 2,00,000 ₹ 2,00,000 Included
3 Supply & Installation of All Refrigerant Joints (Refnets) for both lines 32 Nos. ₹ 3,000 ₹ 96,000 Included
4 Supply & Installation of :
4.1 Cordless Remote Controller (Cassette/Hiwall) 17 Nos. ₹ 3,500 ₹ 59,500 Included
4.2 Corded Remote Controller (TFA) 1 No. ₹ 3,500 ₹ 3,500 Included
Computer Controlled Network System for monitoring & controlling all Indoor & Outdoor
4.3 Units, Central point including all software & cabling (I-Manager) / I Touch Central Controller, RO Nos. - - - -
with BacNet support, compatible to third party BMS
5 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-I ₹ 19,41,000 Included
Section-II : Lowside Items (Indegenous)
All Refrigerant (Cu) Piping along with fittings, hangers, trays and supports etc. between Indoor
6
& Outdoor Units duly Class 'O' insulated as per specifications.
6.1 Gas Piping with 19 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 41.3 mm RO RMT - - - -
Ø 38.1 mm RO RMT - - - -
Ø 34.9 mm 10 RMT ₹ 1,950 ₹ 19,500 Included
Ø 31.8 mm RO RMT - - - -
Ø 28.6 mm 20 RMT ₹ 1,500 ₹ 30,000 Included
Ø 25.4 mm RO RMT - - - -
Ø 22.2 mm 45 RMT ₹ 1,000 ₹ 45,000 Included
Ø 19.1 mm 5 RMT ₹ 850 ₹ 4,250 Included
Ø 15.9 mm 45 RMT ₹ 750 ₹ 33,750 Included
Ø 12.7 mm 15 RMT ₹ 600 ₹ 9,000 Included
Note : For exposed piping insulation thickness should be 38mm, as per technical specification.
6.2 Liquid Piping with 13 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 22.2 mm RO RMT - - - -
Ø 19.1 mm 10 RMT ₹ 800 ₹ 8,000 Included
Ø 15.9 mm 15 RMT ₹ 650 ₹ 9,750 Included
Ø 12.7 mm 5 RMT ₹ 525 ₹ 2,625 Included
Ø 9.5 mm 95 RMT ₹ 450 ₹ 42,750 Included
Ø 6.4 mm 15 RMT ₹ 350 ₹ 5,250 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Note : For exposed piping insulation thickness should be 26mm, as per technical specification.
C-PVC Drain Piping duly insulated with 6 mm Nitrile Rubber / EPDM / XLPE Class 'O' with
7
supports, from Indoor Unit to nearest drain point
50 mm 50 RMT ₹ 250 ₹ 12,500 Included
32 mm 10 RMT ₹ 200 ₹ 2,000 Included
25 mm 70 RMT ₹ 150 ₹ 10,500 Included
8 Communication Cabling between Outdoor Units and Indoor Units in FRLS PVC Conduit 280 RMT ₹ 150 ₹ 42,000 Included
9 Additional Charge of R410 A Gas & Compressor Oil for 2 Nos. of ODU's and 18 Nos. of IDU's 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included
Design, Supply, Installation, Testing and Commissioning of Power Distribution Panel with
mounting arrangements, Incoming and Outgoing MCCB / MCB, Indication of Voltage, Current
& Power, Phase Indicating Lights, Contactor / Over load Relay with built in Single Phase
10
preventor, Power Factor Improvement (Lagging) close to Unity with selection of capacitor
bank in the ratio of 1 / 2 / 4 / 8 / 8 and Remote Start / Stop facility for all Starters, Auto /
Manual Switch and Intelligent Power Meter, suitable for Outdoor Installation (IP 65).
10.1 2 Nos. VRF ODU (VRF System-05, TFA-07) and spares 1 No. ₹ 2,50,000 ₹ 2,50,000 Included
Power Cabling & Earthing as per specifications between Panel and all Equipment with
11 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included
hangers, supports, and trays etc. all Equipment with hangers, supports, and trays etc.
12 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-II ₹ 7,26,875 Included
TOTAL OF VARIABLE REFRIGERANT FLOW (VRF) SYSTEM ₹ 26,67,875 Included
C2 SPLIT SYSTEM AND ITS ASSOCIATED WORKS
Section-I : Highside Items (Imported)
Supply, Installation, Testing and Commissioning of Split Hiwall, Outdoor Units, with R410 A or
R32 or R407 Refrigerant,Hermitically sealed Rotary Compressors, Special Precoated Fins,
1 Panel, Corrosion resistant (suitable for seaside installation) coated Condenser, Condenser
Fan, M.S. Hot Dip Galvanised stands / supports etc.,Indoor Units with Pumping Kit, Fresh Air
connection, Brackets / Hangers, Supports and following minimum Cooling capacities.
1.02 TR : Server Room (1W+1S) 2 Nos. ₹ 35,000 ₹ 70,000 Included
2 Supply & Installation of :
2.1 Cordless Remote Controller 2 Nos. ₹ 3,500 ₹ 7,000 Included
3 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-I ₹ 77,000 Included
Section-II : Lowside Items (Indegenous)
All Refrigerant (Cu) Piping along with fittings, hangers, trays and supports etc. between Indoor
4
& Outdoor Units duly Class 'O' insulated as per specifications.
Gas Piping with 19 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 9.5 mm 35 RMT ₹ 550 ₹ 19,250 Included
Liquid Piping with 12 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 6.4 mm 35 RMT ₹ 350 ₹ 12,250 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

C-PVC Drain Piping duly insulated with 6 mm Nitrile Rubber / EPDM / XLPE Class 'O' with
5
supports, from Indoor Unit to nearest drain point
25 mm 20 RMT ₹ 150 ₹ 3,000 Included
6 Communication Cabling between Outdoor Units and Indoor Units in FRLS PVC Conduit 70 RMT ₹ 150 ₹ 10,500 Included
7 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-II ₹ 45,000 Included
TOTAL OF SPLIT SYSTEM ₹ 1,22,000 Included
C3 FRESH AIR SYSTEM AND ITS ASSOCIATED WORKS
1 Fresh Air System includes Supply, Installation, and Testing of following :
Powder Coated / Anodised Extruded Aluminum Inlet Louver with Insect screen as per
1.1
specifications
1000 mm X 300 mm 1 No. ₹ 2,500 ₹ 2,500 Included
20 mm Thick Pre Insulated Duct (PUF/PIR) with flanges, supports etc. as per approved Shop
1.2 125 SqM ₹ 1,500 ₹ 1,87,500 Included
drawings, Specifications and SMACNA standards (Rectangular Shape) for Fresh Air.
1.3 Duct / Constant Flow Controller for Fresh Air balancing
155 CMH 6 Nos. ₹ 1,800 ₹ 10,800 Included
115 CMH 1 No. ₹ 1,800 ₹ 1,800 Included
110 CMH 1 No. ₹ 1,800 ₹ 1,800 Included
105 CMH 1 No. ₹ 1,800 ₹ 1,800 Included
70 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
1.4 Insulated Flexible connection between Indoor Units and DFC
Ø 150 mm 10 RMT ₹ 300 ₹ 3,000 Included
1.5 Metallic Clamps for Flexible connections
Ø 150 mm 20 Nos. ₹ 200 ₹ 4,000 Included
Powder Coated Extruded Aluminum, Fresh Air Diffuser with removable core and with Volume
1.6
Control Damper, as per specifications
200 mm X 200 mm 5 Nos. ₹ 2,000 ₹ 10,000 Included
Powder Coated Extruded Aluminum, Fresh Air Grill with Volume Control Damper, as per
1.7
specifications
150 mm X 150 mm 5 Nos. ₹ 750 ₹ 3,750 Included
2 Any Other Item the Contractor wants to add for the completion of the Project.
TOTAL OF FRESH AIR SYSTEM ₹ 2,28,450 Included
C4 TOILET & OTHER VENTILATION SYSTEM
1 Exhaust Air System includes Supply, Installation, Testing and Commissioning of following:
Powder Coated / Anodised Extruded Aluminum Outlet Louver with Insect screen as per
1.1
specifications
300 mm X 200 mm 1 No. ₹ 1,000 ₹ 1,000 Included
Ceiling Suspended Exhaust Air Inline Fan with Canvas connections suitable as per
1.2
specifications
250 CFM Vs 15 mm Static 1 No. ₹ 25,000 ₹ 25,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Wall Mounted Exhaust Air Propeller Fan, with Gravity Louver 375 mm X 375 mm, suitable as
per specifications
200 CFM Vs 10 mm Static 1 No. ₹ 12,000 ₹ 12,000 Included
150 CFM Vs 10 mm Static 2 Nos. ₹ 12,000 ₹ 24,000 Included
Factory Fabricated G.I. Exhaust Air Duct with flanges, supports etc.as per approved Shop
1.3
drawings, Specifications and SMACNA standards
24 Gauge (0.63 mm Thick) 10 SqM ₹ 750 ₹ 7,500 Included
1.4 13 mm Thick Nitrile / EPDM Rubber / XLPE Class 'O' Insulation for G.I. Exhaust Air duct RO SqM - - - -
Power Coated Extruded Aluminum, Exhaust Air Grill with Volume Control Damper, as per
2
specifications
300 mm X 300 mm 1 No. ₹ 1,000 ₹ 1,000 Included
3 Any Other Item the Contractor wants to add for the completion of the Project
TOTAL OF TOILET & OTHER VENTILATION SYSTEM ₹ 70,500 Included
TOTAL OF FIFTH FLOOR ₹ 30,88,825 Included
D SIXTH FLOOR
D1 VARIABLE REFRIGERANT FLOW (VRF) SYSTEM
Section-I : Highside Items (Imported)
Supply, Installation, Testing and Commissioning of Modulating Outdoor Units, with R410 A
Refrigerant, Multi Scroll Compressors (all Variable), Special Precoated Fins, Panel, Corrosion
resistant coated Condenser, Inverter based Condenser Fan, M.S. Hot Dip Galvanised stands /
1
supports, Electrical & Microprocessor Panel, Isolating Valves and all the necessary accessories
for proper functioning of the Units, and compatible to operate in Cooling mode at 42 deg C
ambient conditions, with following minimum Cooling capacities.
1.1 73.5 KW (20.90 TR) : System-06 (Top Discharge) 1 No. ₹ 5,50,000 ₹ 5,50,000 Included
1.2 33.5 KW (9.53 TR) : TFA System-08 (Side Discharge) 1 No. ₹ 2,75,000 ₹ 2,75,000 Included
Note : Contractor should consider deration as per conditions mentioned in Specifications.
After deration, Unit capacities and sizes have to be checked at site. So Contractor to visit site
to check feasibility for ODU placement before bidding.
Supply, Installation, Testing and Commissioning of Indoor Units with Remote and all
2
accessories, Hangers / Brackets & Supports.
Ceiling Suspended 4 Way Regular Cassette Units with Drain Pump kit, Power Pintop, and
2.1
Fresh Air connections etc.
2.1.1 11.18 KW (3.18 TR) Vs 830 CFM 2 Nos. ₹ 45,000 ₹ 90,000 Included
Ceiling Suspended 4 Way Mini Cassette Units with Drain Pump kit, Power Pintop, and Fresh
2.2
Air connections etc.
2.2.1 4.5 KW (1.28 TR) Vs 406 CFM 2 Nos. ₹ 42,000 ₹ 84,000 Included
2.2.2 2.8 KW (0.8 TR) Vs 318 CFM 5 Nos. ₹ 35,000 ₹ 1,75,000 Included
2.3 Ceiling Suspended 1 Way Cassette Units with Drain Pump kit, Power Pintop etc.
2.3.1 7.1 KW (2.02 TR) Vs 614 CFM 6 Nos. ₹ 45,000 ₹ 2,70,000 Included
2.4 Ceiling Suspended Treated Fresh Air Units with Drain Pump kit, and Power Pintop etc.

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

2.4.1 28.0 KW (8.0 TR) Vs 1377 CFM 1 No. ₹ 2,00,000 ₹ 2,00,000 Included
3 Supply & Installation of All Refrigerant Joints (Refnets) for both lines 28 Nos. ₹ 3,000 ₹ 84,000 Included
4 Supply & Installation of :
4.1 Cordless Remote Controller (Cassette/Hiwall) 15 Nos. ₹ 3,500 ₹ 52,500 Included
4.2 Corded Remote Controller (TFA) 1 No. ₹ 3,500 ₹ 3,500 Included
Computer Controlled Network System for monitoring & controlling all Indoor & Outdoor
4.3 Units, Central point including all software & cabling (I-Manager) / I Touch Central Controller, RO Nos. - - - -
with BacNet support, compatible to third party BMS
5 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-I ₹ 17,84,000 Included
Section-II : Lowside Items (Indegenous)
All Refrigerant (Cu) Piping along with fittings, hangers, trays and supports etc. between Indoor
6
& Outdoor Units duly Class 'O' insulated as per specifications.
6.1 Gas Piping with 19 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 41.3 mm RO RMT - - - -
Ø 38.1 mm RO RMT - - - -
Ø 34.9 mm 20 RMT ₹ 1,950 ₹ 39,000 Included
Ø 31.8 mm RO RMT - - - -
Ø 28.6 mm 20 RMT ₹ 1,500 ₹ 30,000 Included
Ø 25.4 mm RO RMT - - - -
Ø 22.2 mm 10 RMT ₹ 1,000 ₹ 10,000 Included
Ø 19.1 mm 40 RMT ₹ 850 ₹ 34,000 Included
Ø 15.9 mm 35 RMT ₹ 750 ₹ 26,250 Included
Ø 12.7 mm 25 RMT ₹ 600 ₹ 15,000 Included
Note : For exposed piping insulation thickness should be 38mm, as per technical specification.
6.2 Liquid Piping with 13 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 22.2 mm RO RMT - - - -
Ø 19.1 mm 15 RMT ₹ 800 ₹ 12,000 Included
Ø 15.9 mm 10 RMT ₹ 650 ₹ 6,500 Included
Ø 12.7 mm 20 RMT ₹ 525 ₹ 10,500 Included
Ø 9.5 mm 80 RMT ₹ 450 ₹ 36,000 Included
Ø 6.4 mm 25 RMT ₹ 350 ₹ 8,750 Included
Note : For exposed piping insulation thickness should be 26mm, as per technical specification.
C-PVC Drain Piping duly insulated with 6 mm Nitrile Rubber / EPDM / XLPE Class 'O' with
7
supports, from Indoor Unit to nearest drain point
50 mm 65 RMT ₹ 250 ₹ 16,250 Included
25 mm 55 RMT ₹ 150 ₹ 8,250 Included
8 Communication Cabling between Outdoor Units and Indoor Units in FRLS PVC Conduit 300 RMT ₹ 150 ₹ 45,000 Included
9 Additional Charge of R410 A Gas & Compressor Oil for 2 Nos. of ODU's and 16 Nos. of IDU's 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Design, Supply, Installation, Testing and Commissioning of Power Distribution Panel with
mounting arrangements, Incoming and Outgoing MCCB / MCB, Indication of Voltage, Current
& Power, Phase Indicating Lights, Contactor / Over load Relay with built in Single Phase
10
preventor, Power Factor Improvement (Lagging) close to Unity with selection of capacitor
bank in the ratio of 1 / 2 / 4 / 8 / 8 and Remote Start / Stop facility for all Starters, Auto /
Manual Switch and Intelligent Power Meter, suitable for Outdoor Installation (IP 65).
10.1 2 Nos. VRF ODU (VRF System-06, TFA-08) and spares 1 No. ₹ 2,50,000 ₹ 2,50,000 Included
Power Cabling & Earthing as per specifications between Panel and all Equipment with
11 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included
hangers, supports, and trays etc.
12 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-II ₹ 7,47,500 Included
TOTAL OF VARIABLE REFRIGERANT FLOW (VRF) SYSTEM ₹ 25,31,500 Included
D2 FRESH AIR SYSTEM AND ITS ASSOCIATED WORKS
1 Fresh Air System includes Supply, Installation, and Testing of following :
Powder Coated / Anodised Extruded Aluminum Inlet Louver with Insect screen as per
1.1
specifications
1000 mm X 300 mm 1 No. ₹ 2,500 ₹ 2,500 Included
20 mm Thick Pre Insulated Duct (PUF/PIR) with flanges, supports etc. as per approved Shop
1.2 120 SqM ₹ 1,500 ₹ 1,80,000 Included
drawings, Specifications and SMACNA standards (Rectangular Shape) for Fresh Air.
1.3 Duct / Constant Flow Controller for Fresh Air balancing
75 CMH 2 Nos. ₹ 1,500 ₹ 3,000 Included
70 CMH 2 Nos. ₹ 1,500 ₹ 3,000 Included
65 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
50 CMH 2 Nos. ₹ 1,500 ₹ 3,000 Included
45 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
40 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
Ø 150 mm 9 RMT ₹ 300 ₹ 2,700 Included
1.5 Metallic Clamps for Flexible connections
Powder Coated Extruded Aluminum, Fresh Air Diffuser with removable core and with Volume
1.6
Control Damper, as per specifications
150 mm X 150 mm 7 Nos. ₹ 1,500 ₹ 10,500 Included
200 mm X 200 mm 1 No. ₹ 1,000 ₹ 1,000 Included
150 mm X 150 mm 4 Nos. ₹ 750 ₹ 3,000 Included
TOTAL OF FRESH AIR SYSTEM ₹ 2,13,200 Included
D3 TOILET & OTHER VENTILATION SYSTEM
1 Exhaust Air System includes Supply, Installation, Testing and Commissioning of following:
300 mm X 300 mm 2 Nos. ₹ 1,000 ₹ 2,000 Included
300 mm X 200 mm 1 No. ₹ 1,000 ₹ 1,000 Included
400 CFM Vs 15 mm Static 1 No. ₹ 30,000 ₹ 30,000 Included
250 CFM Vs 15 mm Static 1 No. ₹ 25,000 ₹ 25,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Wall Mounted Exhaust Air Propeller Fan, with Gravity Louver 375 mm X 375 mm, suitable as
1.3
per specifications
200 CFM Vs 10 mm Static 1 No. ₹ 12,000 ₹ 12,000 Included
150 CFM Vs 10 mm Static 2 Nos. ₹ 12,000 ₹ 24,000 Included
Factory Fabricated G.I. Exhaust Air Duct with flanges, supports etc.as per approved Shop
1.4
drawings, Specifications and SMACNA standards
1.5 13 mm Thick Nitrile / EPDM Rubber / XLPE Class 'O' Insulation for G.I. Exhaust Air duct RO SqM - - - -
Power Coated Extruded Aluminum, Exhaust Air Grill with Volume Control Damper, as per
2
specifications
400 mm X 400 mm 1 No. ₹ 1,200 ₹ 1,200 Included
300 mm X 300 mm 3 Nos. ₹ 1,000 ₹ 3,000 Included
3 Any Other Item the Contractor wants to add for the completion of the Project.
TOTAL OF TOILET & OTHER VENTILATION SYSTEM ₹ 98,200 Included
TOTAL OF SIXTH FLOOR ₹ 28,42,900 Included
E SEVENTH FLOOR
E1 VARIABLE REFRIGERANT FLOW (VRF) SYSTEM
Section-I : Highside Items (Imported)
Supply, Installation, Testing and Commissioning of Modulating Outdoor Units, with R410 A
Refrigerant, Multi Scroll Compressors (all Variable), Special Precoated Fins, Panel, Corrosion
resistant coated Condenser, Inverter based Condenser Fan, M.S. Hot Dip Galvanised stands /
1
supports, Electrical & Microprocessor Panel, Isolating Valves and all the necessary accessories
for proper functioning of the Units, and compatible to operate in Cooling mode at 42 deg C
ambient conditions, with following minimum Cooling capacities.
1.1 61.5 KW (17.49 TR) : System-07 (Top Discharge) 1 No. ₹ 4,50,000 ₹ 4,50,000 Included
1.2 40.0 KW (11.37 TR) : AHU-01 (Top Discharge) (1W+1S) 2 Nos. ₹ 3,00,000 ₹ 6,00,000 Included
1.3 33.5 KW (9.52 TR) : AHU-02 (Top Discharge) (1W+1S) 2 Nos. ₹ 2,75,000 ₹ 5,50,000 Included
1.4. 28.0 KW (7.96 TR) : TFA System-08 (Side Discharge) 1 No. ₹ 2,50,000 ₹ 2,50,000 Included
Note : Contractor should consider deration as per conditions mentioned in Specifications.
After deration, Unit capacities and sizes have to be checked at site. So Contractor to visit site
to check feasibility for ODU placement before bidding.
Supply, Installation, Testing and Commissioning of Indoor Units with Remote and all
2
accessories, Hangers / Brackets & Supports.
Ceiling Suspended 4 Way Regular Cassette Units with Drain Pump kit, Power Pintop, and
2.1
Fresh Air connections etc.
2.1.1 11.18 KW (3.18 TR) Vs 1183 CFM 2 Nos. ₹ 45,000 ₹ 90,000 Included
2.1.2 9.0 KW (2.56 TR) Vs 865 CFM 1 No. ₹ 42,000 ₹ 42,000 Included
2.1.3 4.5 KW (1.28 TR) Vs 600 CFM 1 No. ₹ 34,000 ₹ 34,000 Included
Ceiling Suspended 4 Way Mini Cassette Units with Drain Pump kit, Power Pintop, and Fresh
2.2
Air connections etc.
2.2.1 3.6 KW (1.02 TR) Vs 353 CFM 3 Nos. ₹ 38,000 ₹ 1,14,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

2.2.2 2.8 KW (0.8 TR) Vs 318 CFM 2 Nos. ₹ 35,000 ₹ 70,000 Included
2.3 Ceiling Suspended 2 Way Cassette Units with Drain Pump kit, Power Pintop etc.
2.3.1 2.8 KW (0.8 TR) Vs 406 CFM 2 Nos. ₹ 30,000 ₹ 60,000 Included
2.4 Ceiling Suspended 1 Way Cassette Units with Drain Pump kit, Power Pintop etc.
2.4.1 7.10 KW (2.02 TR) Vs 614 CFM 1 No. ₹ 45,000 ₹ 45,000 Included
2.4.2 5.62 KW (1.6 TR) Vs 466 CFM 1 No. ₹ 42,000 ₹ 42,000 Included
2.5 Ceiling Suspended Treated Fresh Air Units with Drain Pump kit, and Power Pintop etc.
2.5.1 22.4 KW (6.36 TR) Vs 1024 CFM 1 No. ₹ 1,50,000 ₹ 1,50,000 Included
Expansion Valve Kit with control box as per specifications and necessary accessories etc. with
2.6
minimum cooling capacities:
AHU-01 : 30.9 KW (8.80 TR) (1W+1S) 2 Nos. ₹ 65,000 ₹ 1,30,000 Included
AHU-02 : 27.0 KW (7.70 TR) (1W+1S) 2 Nos. ₹ 65,000 ₹ 1,30,000 Included
3 Supply & Installation of All Refrigerant Joints (Refnets) for both lines 28 Nos. ₹ 3,000 ₹ 84,000 Included
4 Supply & Installation of :
4.1 Cordless Remote Controller (Cassette/Hiwall) 13 Nos. ₹ 3,500 ₹ 45,500 Included
4.2 Corded Remote Controller (TFA) 1 No. ₹ 3,500 ₹ 3,500 Included
Computer Controlled Network System for monitoring & controlling all Indoor & Outdoor
4.3 Units, Central point including all software & cabling (I-Manager) / I Touch Central Controller, RO Nos. - - - -
with BacNet support, compatible to third party BMS
4.4 Corded Controller with Coil Outlet Temperature Transmitter, 0 - 50° C compatible with EEV kit 4 Nos. ₹ 6,000 ₹ 24,000 Included
5 Any Other Item the Contractor wants to add for the completion of the Project
Total for Section-I ₹ 29,14,000 Included
Section-II : Lowside Items (Indegenous)
All Refrigerant (Cu) Piping along with fittings, hangers, trays and supports etc. between Indoor
6
& Outdoor Units duly Class 'O' insulated as per specifications.
6.1 Gas Piping with 19 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 41.3 mm RO RMT - - - -
Ø 38.1 mm RO RMT - - - -
Ø 34.9 mm 10 RMT ₹ 1,950 ₹ 19,500 Included
Ø 31.8 mm RO RMT - - - -
Ø 28.6 mm 35 RMT ₹ 1,500 ₹ 52,500 Included
Ø 25.4 mm RO RMT - - - -
Ø 22.2 mm 5 RMT ₹ 1,000 ₹ 5,000 Included
Ø 19.1 mm 45 RMT ₹ 850 ₹ 38,250 Included
Ø 15.9 mm 25 RMT ₹ 750 ₹ 18,750 Included
Ø 12.7 mm 30 RMT ₹ 600 ₹ 18,000 Included
Note : For exposed piping insulation thickness should be 38mm, as per technical specification.
6.2 Liquid Piping with 13 mm Nitrile Rubber / EPDM / XLPE Insulation
Ø 22.2 mm RO RMT - - - -
Ø 19.1 mm 10 RMT ₹ 800 ₹ 8,000 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

Ø 15.9 mm 35 RMT ₹ 650 ₹ 22,750 Included

Ø 12.7 mm 10 RMT ₹ 525 ₹ 5,250 Included
Ø 9.5 mm 65 RMT ₹ 450 ₹ 29,250 Included
Ø 6.4 mm 30 RMT ₹ 350 ₹ 10,500 Included
Note : For exposed piping insulation thickness should be 26mm, as per technical specification.
C-PVC Drain Piping duly insulated with 6 mm Nitrile Rubber / EPDM / XLPE Class 'O' with
7
supports, from Indoor Unit to nearest drain point
50 mm 25 RMT ₹ 250 ₹ 6,250 Included
32 mm 10 RMT ₹ 200 ₹ 2,000 Included
25 mm 45 RMT ₹ 150 ₹ 6,750 Included
8 Communication Cabling between Outdoor Units and Indoor Units in FRLS PVC Conduit 300 RMT ₹ 150 ₹ 45,000 Included
9 Additional Charge of R410 A Gas & Compressor Oil for 6 Nos. of ODU's and 16 Nos. of IDU's 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included
Design, Supply, Installation, Testing and Commissioning of Power Distribution Panel with
mounting arrangements, Incoming and Outgoing MCCB / MCB, Indication of Voltage, Current
& Power, Phase Indicating Lights, Contactor / Over load Relay with built in Single Phase
10
preventor, Power Factor Improvement (Lagging) close to Unity with selection of capacitor
bank in the ratio of 1 / 2 / 4 / 8 / 8 and Remote Start / Stop facility for all Starters, Auto /
Manual Switch and Intelligent Power Meter, suitable for Outdoor Installation (IP 65).
10.1 2 Nos. VRF ODU (VRF System-07, TFA-09) and spares 1 No. ₹ 2,50,000 ₹ 2,50,000 Included
Power Cabling & Earthing as per specifications between Panel and all Equipment with
11 1 Lot ₹ 1,00,000 ₹ 1,00,000 Included
hangers, supports, and trays etc.
12 Any Other Item the Contractor wants to add for the completion of the Project.
Total for Section-II ₹ 7,37,750 Included
TOTAL OF VARIABLE REFRIGERANT FLOW (VRF) SYSTEM ₹ 36,51,750 Included
E2 AHU SYSTEM AND ITS ASSOCIATED WORKS
Supply, Installation, Testing and Commissioning of Air Handling Units,50 mm Thick Double
skin type, with Mixing box, Intermediate EU-8 Filter & Post EU-13 Filter for Return Air Blower,
and Pre EU-4 Filter,Post EU-08 Filter for Supply Air Blower. (Double Decker) Dx type Coil
1
(Working + Standby), UV Lamps, Plug type Blower, VFD compatible IE3 efficient Motors,
Vibration Isolators, Opposed blade type Dampers at Supply / Return / Fresh / Relief Air, Fire
rated flexible connections etc. suitable as per specifications and for following capacities:
1.1 AHU-01 : Floor Mounted - 8.8 TR (BSL-III LAB) (Double Blower)
: 3700 S.A.CFM Vs 160 mm Static and 437 O.A.CFM
: 3700 R.A.CFM Vs 120 mm Static
: Coil In 22.5 deg.C DB / 15.1 deg.C WB
: Coil Out 9.5 deg.C DB / 8.8 deg.C WB 1 No. ₹ 5,50,000 ₹ 5,50,000 Included
1.2 AHU-02 : Floor Mounted - 7.7 TR (BSL-II+ LAB) (Double Blower)
: 3300 S.A.CFM Vs 160 mm Static and 423 O.A.CFM
: 3300 S.A.CFM Vs 120 mm Static
: Coil In 21.3 deg.C DB / 15.1 deg.C WB

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

: Coil Out 9.6 deg.C DB / 9.0 deg.C WB 1 No. ₹ 5,00,000 ₹ 5,00,000 Included
Supply, Installation, Testing and Commissioning of VFD for Fan drives with IP55 enclosure,
2 Built In Active Filters suitable for THDi & THDv < 3%, Galvanic Isolation for following Motor
rating :
5.5 kW 2 Nos. ₹ 35,000 ₹ 70,000 Included
3.7 kW 2 Nos. ₹ 28,000 ₹ 56,000 Included
Note : Contractor to confirm Motor rating and Blower efficiencies from Manufacturer
Factory Fabricated S.S-304 Supply Air Duct with flanges, supports etc.as per approved Shop
3
drawings, Specifications and SMACNA standards
20 Gauge (1.0 mm Thick) 125 SqM ₹ 3,500 ₹ 4,37,500 Included
Factory Fabricated S.S-304 Return Air Duct with flanges, supports etc.as per approved Shop
4
drawings, Specifications and SMACNA standards
20 Gauge (1.0 mm Thick) 185 SqM ₹ 3,500 ₹ 6,47,500 Included
19 mm Thick Nitrile / EPDM Rubber / XLPE Class 'O' Insulation for S.S.-304 duct for Supply and
5 330 SqM ₹ 825 ₹ 2,72,250 Included
Return Air
19 mm Thick Insulated HEPA Filter Box, 18G SS-304 construction, suitable to fit Minipleat
type HEPA Filters, with Medical Grade Gaskets, Zero leakage, Inlet connections, DOP /
6
Pressure port, Bottom operated VCD, SS-304 Perforated Sheet of 600 mm X 600 mm,
Hangers, Supports and as per specifications etc.
610 mm X 610 mm X 300 mm (H) for Supply Air 4 Nos. ₹ 30,000 ₹ 1,20,000 Included
610 mm X 305 mm X 300 mm (H) for Supply Air 9 Nos. ₹ 28,000 ₹ 2,52,000 Included
305 mm X 305 mm X 300 mm (H) for Supply Air 6 Nos. ₹ 25,000 ₹ 1,50,000 Included
Minipleat type HEPA (EU-13) Filters, depth suitable to design air flow rates and as per
7
specifications etc.
580 mm X 580 mm for Supply Air 4 Nos. ₹ 20,000 ₹ 80,000 Included
580 mm X 275 mm for Supply Air 9 Nos. ₹ 17,500 ₹ 1,57,500 Included
275 mm X 275 mm for Supply Air 6 Nos. ₹ 15,000 ₹ 90,000 Included
SS-304 Return Air Riser with Volume Control Damper & EU-4 Filter Perforated Sheet of size
8
800 mm X 500 mm, at Low Level
8.1 900 mm X 100 mm X 2550 mm (H) 3 Nos. ₹ 20,000 ₹ 60,000 Included
8.2 Perforated Sheet of size 500 mm X 500 mm, at Low Level
600 mm X 100 mm X 2550 mm (H) 13 Nos. ₹ 18,000 ₹ 2,34,000 Included
8.3 Perforated Sheet of size 350 mm X 500 mm, at Low Level
450 mm X 100 mm X 2550 mm (H) 2 Nos. ₹ 15,000 ₹ 30,000 Included
8.4 Perforated Sheet of size 200 mm X 500 mm, at Low Level
300 mm X 100 mm X 2550 mm (H) 5 Nos. ₹ 12,000 ₹ 60,000 Included
9 Flexible connection between HEPA Box and Duct Collar
Ø 200 mm 19 RMT ₹ 450 ₹ 8,550 Included
10 Metallic Clamps for Flexible connections
Ø 200 mm 38 Nos. ₹ 300 ₹ 11,400 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

11 Supply, Installation & Testing of Sensors / Transmitters / Controllers :

11.1 Room type Differential Pressure Transmitter for Lab area
10 Pa (-ve) - 10 Pa (+ve) 2 Nos. ₹ 15,000 ₹ 30,000 Included
11.2 Room Mounted Air Temp. Indicator (Display Type)
0 - 500 C 13 Nos. ₹ 8,000 ₹ 1,04,000 Included
11.3 Differential Pressure (Magnehelic) Gauge For EU-8 Filter (AHU Mounted)
0 - 50 mm 4 Nos. ₹ 8,000 ₹ 32,000 Included
11.4 Differential Pressure Transmitters For EU-13 Filter with Display
0 - 50 mm 21 Nos. ₹ 15,000 ₹ 3,15,000 Included
11.5 Velocity Transmitters (To be integrated with VFD Controller)
0-500 FPM (For AHU Blowers) 4 Nos. ₹ 15,000 ₹ 60,000 Included
Design, Supply, Installation, Testing and Commissioning of Power Distribution Panel with
mounting arrangements, Incoming and Outgoing MCCB / MCB, Indication of Voltage, Current
12
& Power, Phase Indicating Lights, Contactor / Over load Relay with built in Single Phase
preventor suitable for
AHU-01 Motors, VFD with bypass, UV Lamps, Controllers, 2Nos. VRF ODU's (AHU-01) and
12.1 1 No. ₹ 3,00,000 ₹ 3,00,000 Included
Spares
AHU-02 Motors, VFD with bypass, UV Lamps, Controllers, 2Nos. VRF ODU's (AHU-02) and
12.2 1 No. ₹ 3,00,000 ₹ 3,00,000 Included
Spares
Power Cabling & Earthing as per specifications between Panel and all Equipment with
13 1 Lot ₹ 2,50,000 ₹ 2,50,000 Included
hangers, supports, and trays etc.
14 Any Other Item the Contractor wants to add for the completion of the Project.
TOTAL OF AHU AND ITS ASSOCIATED WORK ₹ 51,77,700 Included
E3 FRESH AIR SYSTEM AND ITS ASSOCIATED WORKS
1 Fresh Air System includes Supply, Installation, and Testing of following :
Powder Coated / Anodised Extruded Aluminum Inlet Louver with Insect screen as per
1.1
specifications
1000 mm X 300 mm 1 No. ₹ 2,500 ₹ 2,500 Included
20 mm Thick Pre Insulated Duct (PUF/PIR) with flanges, supports etc. as per approved Shop
1.2 85 SqM ₹ 1,500 ₹ 1,27,500 Included
drawings, Specifications and SMACNA standards (Rectangular Shape) for Fresh Air.
1.3 Duct / Constant Flow Controller for Fresh Air balancing
105 CMH 1 No. ₹ 1,800 ₹ 1,800 Included
75 CMH 3 Nos. ₹ 1,500 ₹ 4,500 Included
70 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
65 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
50 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
45 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
35 CMH 1 No. ₹ 1,500 ₹ 1,500 Included
1.4 Insulated Flexible connection between Indoor Units and DFC
Ø 150 mm 9 RMT ₹ 300 ₹ 2,700 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

1.5 Metallic Clamps for Flexible connections

Ø 150 mm 18 Nos. ₹ 200 ₹ 3,600 Included
Powder Coated Extruded Aluminum, Fresh Air Diffuser with removable core and with Volume
1.6
Control Damper, as per specifications
200 mm X 200 mm 4 Nos. ₹ 2,000 ₹ 8,000 Included
Powder Coated Extruded Aluminum, Fresh Air Grill with Volume Control Damper, as per
1.7
specifications
200 mm X 200 mm 2 Nos. ₹ 1,000 ₹ 2,000 Included
150 mm X 150 mm 4 Nos. ₹ 750 ₹ 3,000 Included
2 Any Other Item the Contractor wants to add for the completion of the Project.
TOTAL OF FRESH AIR SYSTEM ₹ 1,63,100 Included
E4 TOILET & OTHER VENTILATION SYSTEM
1 Exhaust Air System includes Supply, Installation, Testing and Commissioning of following:
Powder Coated / Anodised Extruded Aluminum Outlet Louver with Insect screen as per
1.1
specifications
300 mm X 200 mm 1 No. ₹ 1,000 ₹ 1,000 Included
200 mm X 200 mm 2 Nos. ₹ 1,000 ₹ 2,000 Included
Ceiling Suspended Exhaust Air Inline Fan with Canvas connections suitable as per
1.2
specifications
250 CFM Vs 15 mm Static 1 No. ₹ 25,000 ₹ 25,000 Included
150 CFM Vs 15 mm Static 2 Nos. ₹ 20,000 ₹ 40,000 Included
Wall Mounted Exhaust Air Propeller Fan, with Gravity Louver 375 mm X 375 mm, suitable as
1.3
per specifications
200 CFM Vs 10 mm Static 1 No. ₹ 12,000 ₹ 12,000 Included
150 CFM Vs 10 mm Static 2 Nos. ₹ 12,000 ₹ 24,000 Included
Factory Fabricated G.I. Exhaust Air Duct with flanges, supports etc.as per approved Shop
1.4
drawings, Specifications and SMACNA standards
24 Gauge (0.63 mm Thick) 20 SqM ₹ 750 ₹ 15,000 Included
1.5 13 mm Thick Nitrile / EPDM Rubber / XLPE Class 'O' Insulation for G.I. Exhaust Air duct RO SqM - - - -
Power Coated Extruded Aluminum, Exhaust Air Grill with Volume Control Damper, as per
2
specifications
300 mm X 300 mm 3 Nos. ₹ 1,000 ₹ 3,000 Included
3 Any Other Item the Contractor wants to add for the completion of the Project
TOTAL OF TOILET & OTHER VENTILATION SYSTEM ₹ 1,22,000 Included
TOTAL OF SEVENTH FLOOR ₹ 91,14,550 Included
SUMMARY
GROUND FLOOR ₹ 1,34,000 Included
FIRST FLOOR ₹ 27,03,175 Included
FIFTH FLOOR ₹ 30,88,825 Included
SIXTH FLOOR ₹ 28,42,900 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085
 YRG CARE
CHENNAI
TAMIL NADU

SEVENTH FLOOR ₹ 91,14,550 Included

GRAND TOTAL ₹ 1,78,83,450 Included

Shreeya Consulting
Engineers Pvt. Ltd.

2 Akanksha, Fourth Street, Pallod Farms II, Baner Rd, Pune 411045. India. www.spap.in email- info@spap.in m- 744 775 3085