MCR/K RFID card reader
MCR/K RFID card reader with keypad
The ProxLine MCR/K card reader is ProxTech's most versatile
wall mount reader and keypad. Also available in both 125 kHz as
well as in 13,56 MHz versions with a lot of available data
interfaces, this reader has shown to be the ideal solution for mid-
range reading in applications where wall mounting is required. An
extra mounting frame makes it very easy to mount this reader
when the signal cable is placed on top of the wall; you can just
feed it through the mounting frame.
Some of the highlights : Supported technologies :
Wide choice of interfaces available MCR/K-EM :
Available in 125 kHz and 13.56 MHz version EM4102 and compatibles
MIFARE versions for UID only or full sector Hitag 2 in public mode A
Easy in- and outdoor installation MCR/K-HT : (serial number only)
Designed for wall-mounting Hitag 1, Hitag 2 and Hitag S
Modern design MCR/K-MF (UID only) :
Best price/quality ratio MIFARE® Std 1k and 4k
MCR/K-LG (CSN only):
Legic Prime
MCR/K-FLEX (multi-ISO): *
ISO14443 A/B
ISO15693
ISO18000-3
ISO18092 NFC (peer-to-peer)
* refer to separate datasheet on MCR/K-FLEX
Technical specifications :
Available in different versions :
- 125 Khz EM4102 or equivalent
- 125 kHz Hitag
- 13.56 MHz MIFARE®
- 13.56 MHz Legic
- 13.56 MHz Multi-ISO
Read range
- on 125 kHz : up to 100 mm
- on 13.56 MHz : up to 80 mm
Complete with 12 digit numeric keypad integrated in the reader housing
Selection of interfaces available
Power supply : 9 to 24 VDC
3 LEDs + Buzzer for user feedback
Easy in- or outdoor installation (IP65)
Screw connection in the back of the reader
ProxTech International bvba * Zakstraat 104, 9112 Sinaai ( Belgium )
Tel : +32 (0)3 722 91 60 * Fax : +32 (0)3 722 91 66
Info @ proxtech.com * www.proxtech.com
