Intel® Server Board S2600WT Family

Intel® Server Chassis R1000WT & R2000WT Family

Intel® Server System R1000WT & R2000WT Family
Intel® Storage System R1000WT Family
Product Family Configuration Guide
A Reference document used to assist with ordering parts and accessories available to configure an Intel server system
based on the Intel® Server S2600WT product family.

Revision 2.16
April 23, 2019

Intel® Server Products and Solutions

Intel® Server Board S2600WT Product Family Spares/Accessories List and Configuration Guide

<Blank Page>
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Document Revision History

Date Published Revision Revision Change Description
September 2014 1.0 First Public Release
November 2014 1.16 Updates to product illustrations and MM# for Intel® RAID Modules
Content updates:
 DC Power Supply option target availability date
March 2015 1.17  New Rail kit options target availability date
 Removed I/O Module AXX10GBTWLIOM – Not supported
 Added I/O Module AXX10GBTWLIOM3 with target availability date
Document Upgrade
 New document format
 New product definition/data tables
 New graphics
April 2015 2.0
 Improved guidance for configuration requirements
 Improved descriptions for product family definition
 Updated SAS/SATA data cable guide
 Updated Disclaimer Statements
Document changes:
 Added “Server” reference to product family naming
May 2015 2.01
 Corrected 1U riser part number in 1U L6 BOM Lists
 Updated Server Board, Chassis only and L6 product weight information
Document Upgrade
 Updated AXX750DCCRPS target availability date
 Updated A1USHRTRAIL Order Information
July 2015 2.02
 Updated A1UFULLRAIL Order Information
 Updated AXXFULLRAIL Order Information
 Updated AXXCMA2 Order Information
Document changes
August 2015 2.03
 Added Intel® Integrated RAID Module RMS25CB080
Document changes
September 2015 2.04
 Added McAfee® Antivirus as an accessory
Document changes
November 2015 2.05
 Removed the Ethernet modules AXX1P40FRTIOM and AXX2P40FRTIOM that are based on XL710-AM2.
Document changes
November 2015 2.06
 Server Board and L6 System Product Codes updated with “R”. Order information Updated MM#, UPC, EAM.

ii
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Date Published Revision Revision Change Description
Document changes
 Added Intel Storage System R1000WT Family to the document
 Added 2u Short Rail Kit option to document
 Updated order information for McAfee Antivirus Software
February 2016 2.07
 Fixed several section reference links throughout the document
 Added references showing support for Intel® Xeon® processor E5-2600 v4 on all server boards and systems
 Added Intel TPM AXXTPME6 and AXXTPME7
 Added new board SKU S2600WTTS1R
Document changes
March 2016 2.07
 Added new Intel® PCI Express 8-Lane, 4-Port Fan-Out Switch “AXX4PX8HDAIC”
Document changes
June 2016 2.08  Added new Intel® Omni-Path Host Fabric Interface Adapter 100 Series 1 “100HFA016LS”
 Added new Intel® Integrated RAID Module “RMS3AC160”
Document changes
 Removed from document the SKUs R1208WTTA04NVMR and R1208WTTB04NVMR
 Added new 1U riser 3 PCIe* retimer “A1U2PXR3HDAIC”
 Added the Ethernet modules AXX1P40FRTIOM and AXX2P40FRTIOM.
July 2016 2.09  Added Remote Management Module 4 version 2 (RoHS free) – AXXRMM4LITE2
 Removed Intel® Integrated RAID Module “RMS3AC160”
 Added Intel® Integrated RAID Module RMS3VC160
 Fixed travel length of Rail spares “AXXFULLRAIL” and “AXXSHRTRAIL”
 Rewording note in SKUs “R2312WTTYSR” and “R2224WTTYSR”
Document Changes
October 2.10
 Removed line in chapter 5.3 of the “Intel® Accessory Kit A2U44X25NVMEDK2”.
Document Changes
November 2.11  Added data of bracket adjustment for RAILs

Document Changes
 Processors Family supported
April 2.12  Replaced the FR1304S3HSBP Spare with FR1304S3HSBP2 (RoHs free).
 Added Visual Compute Accelerator, VCA1283LVV
 Replaced image of spare “A2UL16RISER2” with correct one.
Document Changes
 Added air duct “AWTCOPRODUCT” as a required accessory for the visual computing accelerator
July 2.13
 Added back Intel® Integrated RAID Module “RMS3AC160” (Issue fixed)
 Added RAID Maintenance Free Backup Unit AXXRFMBU6
Document Changes
April 2.14
 Added Visual Compute Accelerator, VCA1585LMV

iii
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Date Published Revision Revision Change Description
Document Changes
September 2018 2.15  Replaced spare “FXXFPANEL” with “FXXFPANEL2”
 Updated links of “Additional information for Intel RAID products”
Document Changes
April 2019 2.16
 Added details of supported lengths in systems 1U when RAID modules are installed

iv
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Disclaimer
Intel technologies’ features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn more
at Intel.com, or from the OEM or retailer.
You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products described
herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter disclosed
herein.

No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.

The products described may contain design defects or errors known as errata which may cause the product to deviate from published specifications.
Current characterized errata are available on request.

Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose,
and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

Intel, the Intel logo, Xeon, and Xeon Phi, McAfee are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

Copyright © 2018 Intel Corporation. All Rights Reserved.

v
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Table of Contents
1 Intel Server Family Overview ............................................................................................................................................................................................................. 1
1.1 Intel® S2600WT Server Chassis and Server System Product Code Naming Convention .................................................................................................................... 3
1.2 Product Family Summary Chart .................................................................................................................................................................................................................................... 6
1.3 Intel® S2600GZ/GL Product Family to Intel® Server S2600WT Product Family Transition Guide ................................................................................................... 1
1.4 Intel® supported Xeon® Processors E5-2600 v3, v4, Family ............................................................................................................................................................................. 2

2 Server Building Block Configuration ................................................................................................................................................................................................ 2

2.1 Building Block Recipe Summary .................................................................................................................................................................................................................................... 3
2.2 Intel® Server Board S2600WT Product Family SKUs ........................................................................................................................................................................................... 4
iPC – S2600WT2R .................................................................................................................................................................................................................................................................. 4
iPC – S2600WTTR .................................................................................................................................................................................................................................................................. 5
iPC – S2600WTTS1R ............................................................................................................................................................................................................................................................ 6
2.3 Intel® Server Chassis R1000WT Product Family SKUs – (1U Rack Mount Chassis) ............................................................................................................................... 7
2.4 Intel® Server Chassis R2000WT Product Family SKUs – (2U Rack Mount Chassis) .............................................................................................................................10

3 Server System Configuration .......................................................................................................................................................................................................... 14

3.1 Intel® Server/Storage System R1000WT Product Family SKUs – (1U Rack Mount System) .............................................................................................................15
3.2 Intel® Server System R2000WT Product Family SKUs – (2U Rack Mount System) ...............................................................................................................................20

4 SAS / SATA Data Cable Guide .......................................................................................................................................................................................................... 27

4.1 SAS / SATA Data Cable Connector Types ................................................................................................................................................................................................................27
4.2 1U / 2U Server System SAS / SATA Cable Guide ..................................................................................................................................................................................................28
4.2.1 1U 4 x 3.5” – R1304WTxxx SAS / SATA Data Cable Guide ............................................................................................................................................................... 30
4.2.2 1U 8 x 2.5” – R1208WTxxx SAS / SATA Data Cable Guide ............................................................................................................................................................... 31
4.2.3 2U 8 x 3.5” – R2308WTxxx Cable Guide .................................................................................................................................................................................................. 32
4.2.4 2U 12 x 3.5 – R2312WTxxx Cable Guide ................................................................................................................................................................................................. 33
4.2.5 2U 2.5” Front Mount Drive Bay Cable Guide .......................................................................................................................................................................................... 38
4.3 Intel SAS / SATA Data Cable Kits .................................................................................................................................................................................................................................45

5 Intel 1U / 2U System Configuration Options ............................................................................................................................................................................... 49

vi
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
5.1 1U 8x2.5” Combo PCIe* SFF (NVMe) SSD / SAS Backplane – Intel® Accessory Kit A1U44X25NVMEDK ...................................................................................49
5.1.1 1U 8x2.5” – Intel® Accessory Kit A1U44X25NVMEDK Cable Guide ............................................................................................................................................. 50
5.2 2U 8x2.5” Combo PCIe* SFF (NVMe) SSD / SAS Backplane – Intel® Accessory Kit A2U44X25NVMEDK ....................................................................................52
5.2.1 2U 8x2.5” – Intel® Accessory Kit A2U44X25NVMEDK SAS/SATA Cable Guide ....................................................................................................................... 54
5.2.2 2U 16x2.5” / 24x2.5” –– Intel® Accessory Kit A2U44X25NVMEDK SAS / SATA Cable Guide ............................................................................................ 55
5.3 2U 8x2.5” Combo PCIe x8 SFF (NVMe) SSD / SAS Backplane – Intel® Accessory Kit A2U44X25NVMEDK2 .............................................................................56
5.3.1 2U Chassis Drive Bay Identification ........................................................................................................................................................................................................... 58
5.4 2U Rear Mount Hot Swap Drive Bay Accessory Kit – iPC A2UREARHSDK ................................................................................................................................................59
iPC - A2UCBLSSD ................................................................................................................................................................................................................................................................. 60
5.5 2U 8x3.5” Front Mount Hot Swap Backplane Assembly - iPC A2U8X35S3HSDK .................................................................................................................................61
iPC – A2U8X35S3HSDK ..................................................................................................................................................................................................................................................... 61
5.6 2U 8x2.5” Drive Bay Module Options ........................................................................................................................................................................................................................62
iPC – A2U8X25S3HSDK .................................................................................................................................................................................................................................................... 63
iPC – A2U8X25S3DPDK ..................................................................................................................................................................................................................................................... 63
iPC – A2UHANDLKIT ............................................................................................................................................................................................................................................................ 64
5.7 Locking Front Bezel Accessory Kits ............................................................................................................................................................................................................................65
5.7.1 2U Front Bezel Accessory Kit – iPC A2UBEZEL ..................................................................................................................................................................................... 65
5.7.2 1U Front Bezel Accessory Kit – iPC A1UBEZEL ..................................................................................................................................................................................... 66
5.8 1U / 2U PCIe* Riser Card Accessory/Spare FRU Options .................................................................................................................................................................................67
5.8.1 1U Riser Card Options ..................................................................................................................................................................................................................................... 67
5.8.2 2U Riser Card Options ..................................................................................................................................................................................................................................... 68
5.9 Intel® I/O Expansion Modules .......................................................................................................................................................................................................................................69
5.10 Intel® SAS RAID Add-in Cards, Modules, and Accessories................................................................................................................................................................................72
5.10.1 Intel® Integrated RAID Module RMS3 Product Family – SAS 3.0 (12 Gb/s) ............................................................................................................................... 73
5.10.2 Intel® RAID Accessory Options .................................................................................................................................................................................................................... 79
5.11 Intel® PCI Express NVMe Add-in Cards .....................................................................................................................................................................................................................81
5.12 Intel Power Supply Modules and Power Cords .....................................................................................................................................................................................................82
5.13 1U / 2U Rack Mount Kits .................................................................................................................................................................................................................................................83
5.13.1 iPC - AXXPRAIL................................................................................................................................................................................................................................................... 83
5.13.2 iPC – AXXELVRAIL ............................................................................................................................................................................................................................................. 83
5.13.3 iPC – AXX1U2UCMA ......................................................................................................................................................................................................................................... 83
iPC - AXX2POSTBRCKT ..................................................................................................................................................................................................................................................... 84

vii
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
5.13.4 Intel® Xeon Phi™ Coprocessor Card and Non-Intel GPGPU Support............................................................................................................................................ 85
iPC – AWTCOPRODUCT ..................................................................................................................................................................................................................................................... 87
iPC – A2UL16RISER2 ........................................................................................................................................................................................................................................................... 87
5.14 Intel® I/O Expansion Add-in Cards ..............................................................................................................................................................................................................................88
iPC – 100HFA016LS............................................................................................................................................................................................................................................................. 88

6 1U / 2U Miscellaneous Accessory Options .................................................................................................................................................................................. 89

iPC – A1U2ULCP .................................................................................................................................................................................................................................................................... 89
iPC – AXXSATADVDROM.................................................................................................................................................................................................................................................... 89
iPC – AXXSATADVDRWROM ............................................................................................................................................................................................................................................ 89
iPC - AXXSSDODDKIT ......................................................................................................................................................................................................................................................... 90
iPC - AXXRJ45DB93 ............................................................................................................................................................................................................................................................ 90
iPC - AXXRMM4LITE ............................................................................................................................................................................................................................................................ 90
iPC - AXXRMM4LITE2 ......................................................................................................................................................................................................................................................... 91
iPC - AXXTPME5 ................................................................................................................................................................................................................................................................... 91
iPC – AXXTPME6 ................................................................................................................................................................................................................................................................... 91
iPC – AXXTPME7 ................................................................................................................................................................................................................................................................... 92

7 1U / 2U Spare and Replacement Parts (FRUs) ............................................................................................................................................................................. 93

8 Intel® Visual Compute Accelerators ............................................................................................................................................................................................... 96

9 Software Security - McAfee® Antivirus for Intel® Server Systems* ......................................................................................................................................... 98

9.1 How to order it? ...................................................................................................................................................................................................................................................................98
9.2 McAfee® Antivirus for Intel® Server Systems ...........................................................................................................................................................................................................98

10 Extended Warranty ..................................................................................................................................................................................................................... 100

Glossary of Terms ................................................................................................................................................................................................................................... 101

viii
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

List of Tables
Table 1. Product Family Reference Collaterals .................................................................................................................................................................................................................... 2
Table 2. Server Board Product Family Summary ................................................................................................................................................................................................................ 6
Table 3. Server Chassis & Server/Storage System Product Family Summary ....................................................................................................................................................... 6
Table 4. 1U / 2U Server System Product Family Generation to Generation Transition Guide ........................................................................................................................ 1
Table 5. 1U / 2U Building Block to Integrated System Recipe Guide ......................................................................................................................................................................... 3
Table 6. 2U 12 x 3.5” – R2312WTxxx SAS / SATA Data Cable Guide (with SAS Expander) ............................................................................................................................ 35
Table 7. 2U 8 x 2.5" (Drive Bay #1) - SAS/SATA Data Cable Guid (with no SAS Expander) ............................................................................................................................ 39
Table 8. 2U 8 x 2.5” (Drive Bay #2) – SAS / SATA Data Cable Guide (with no SAS Expander) ...................................................................................................................... 40
Table 9. 2U 8 x 2.5” (Drive Bay #3) – SAS / SATA Data Cable Guide (with no SAS Expander) ...................................................................................................................... 41
Table 10. 2U 2.5” Front Mount Drive Configurations with SAS Expander – SAS Data Cable Guide .......................................................................................................... 43
Table 11. Storage Data Cable Kit Description and Order Information .................................................................................................................................................................... 46
Table 12. 1U 8x2.5" Combo Backplane SAS/SATA Cable Guide ............................................................................................................................................................................... 51

ix
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

1 Intel Server Family Overview

This document is provided to assist Intel customers with identifying the right Intel server system and available accessories to create a unique server
platform that meet their unique server requirements.

The Intel® S2600WT product family is offered as both building block options and integrated systems. The product family consists of the following:

Intel® Server S2600WT Product Family

Intel® Server Board S2600WT

Intel® Server Chassis R1000WT Intel® Server Chassis R2000WT

Product Family Product Family

Intel® Server System R1000WT Intel® Server System

Product Family R2000WT Product Family

Intel® Storage System R1000WT

Product Family

Server Building Blocks:

• Intel® Server Board S2600WT – Server Board only (Building block option and spare FRU)
• Intel® Server Chassis R1000WT product family – 1U Rack Mount Server Chassis only
• Intel® Server Chassis R2000WT product family – 2U Rack Mount Server Chassis only

Integrated Server Systems:

• Intel® Server System R1000WT product family – 1U Rack Mount Server System integrated with an Intel® Server Board S2600WT
• Intel® Server System R2000WT product family – 2U Rack Mount Server System integrated with an Intel® Server Board S2600WT
• Intel® Storage System R1000WT product family – 1U Rack Mount Server System integrated with an Intel® Server Board S2600WT + Intel®
NVMe drives

The Intel® Server S2600WT product family supports the following processors and memory:
• Intel® Xeon® processor E5-2600 v3 & v4 product families

1
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Note: Previous generation Intel® Xeon® processors are not supported.

• DDR4 ECC RDIMM 1600, 1866, 2133, 2400

• DDR4 ECC LRDIMM 1600, 1866, 2133, 2400

Additional Information and Software

For additional information about this family of products or any of their supported accessories, refer to the following resources available at
http://www.intel.com/support.
Table 1. Product Family Reference Collaterals

For this information or software Use this Document or Software

 Intel® Server Board S2600WT Technical Product Specification
 Intel® Server System R1000WT Product Family Technical Product Specification
 Intel® Server System R2000WT Product Family Technical Product Specification
 Intel® Remote Management Module 4 (Intel® RMM4) and Integrated BMC User Guide
 Intel® Remote Management Module 4 Technical Product Specification
For in-depth technical information about this product  Intel® I/O Expansion Modules Hardware Specification
family
 Intel® Server System BIOS Setup Utility Guide
 Intel® Server Platform Firmware Specification Update
 Product Safety and Regulatory Compliance – For Intel® Server Systems supporting the Intel® Xeon® Processor
E5-2600 v3 & v4 product families
http://www.intel.com/content/www/us/en/motherboards/server-motherboards/server-board-
s2600wt.html?wapkw=s2600wt+product+family
 Intel® Server System R1000WT product family System Integration and Service Guide
 Intel® Server System R2000WT product family System Integration and Service Guide
For system integration instructions and service guidance
http://www.intel.com/content/www/us/en/server-chassis/server-chassis-r1000wt.html
http://www.intel.com/content/www/us/en/server-chassis/server-chassis-r2000wt.html
Intel® Server Configurator tool
For server configuration guidance and compatibility
http://serverconfigurator.intel.com

Intel® Server Board S2600WT Product Family Power Budget Tool and Thermal Configuration Guide
For system power budget guidance
https://downloadcenter.intel.com/product/78562/Intel-Server-Board-S2600WT-Family
For system firmware updates, onboard device drivers,
https://downloadcenter.intel.com/product/78562/Intel-Server-Board-S2600WT-Family
and software to manage your Intel® Server System.
For a complete list of supported processors, memory, http://www.intel.com/content/www/us/en/motherboards/server-motherboards/server-board-
add-in cards, and peripherals: s2600wt.html?wapkw=s2600wt+product+family
Product Warranty Information http://www.intel.com/content/www/us/en/support/services/000005886.html

2
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

1.1 Intel® S2600WT Server Chassis and Server System Product Code Naming Convention
Drive Server # of Power Supports for
Chassis Form both Intel® Xeon®
Board Supplies processor E5-
Type Factor Identifier Included 2600 v3 and v4
product families
Intel® Server Chassis
R 2 2 08 WTT Y C 1 R
Intel® Server System
U Height # of Power Special
Drives Supply System SKU
Type
Chassis Type Server Board Identifier
WT = Intel® Server Board S2600WT product family supported
R = RACK MOUNT WT2 = Intel® Server Board S2600WT w/1 GbE LOM – iPC S2600WT2
WTT = Intel® Server Board S2600WT w/10 GbE LOM – iPC S2600WTT
U Height Power Supply Type Included
1 = 1U X = None Included
2 = 2U G = 750W
Y = 1100W
Drive Form Factor # of Power Supplies Included
(Specific to front drive bays) X = None
0 = No drives supported S = 1 (Non-redundant)
2 = 2.5” C = 2 (Redundant)
3 = 3.5”
# of Drives Supported Special System SKU
(Specific to front drive bays) # = a sequential number starting with 1 within the product family, identifying a special
00 12 system SKU that adds a non-standard feature from other offered system SKUs. This
04 16 last digit may or may not be present on all offered system SKUs.
08 24
Note: 00 product codes have no front mount drive bays. Hot swap drive
support can be added with the addition of available drive bay accessory
options.

3
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Figure 1. Intel® Server System R1000WT Feature Set Identification

4
Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Figure 2. Intel® Server System R2000WT Feature Set Identification

5
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

1.2 Product Family Summary Chart

The Intel® S2600WT product family is built around either of two Intel® Server Board S2600WT options: S2600WTT and S2600WT2. The feature
set of each server board option is identical except for the onboard LAN controller.

The S2600WTTR SKU offers a LAN on Motherboard (LOM) option supporting dual RJ45 10Gb Base-T LAN ports.
The S2600WT2R SKU offers a LAN on Motherboard (LOM) option supporting dual RJ45 1Gb Base-T LAN ports.
The S2600WTTCR SKU offers a LAN on Motherboard (LOM) option supporting dual RJ45 10Gb Base-T LAN ports and Intel® Platform Firmware
Resilience Technology (PFR) and Asset Protect-In-Transit.

The following tables provides an overview of available Intel product codes for building blocks and systems within the Intel® S2600WT product
family. Each line item identifies key features supported in the shipping Intel SKU. Additional order code information and full product descriptions
for each option are provided in later sections.
Table 2. Server Board Product Family Summary
# of SATA SW
# of CPU # of Riser Onboard RJ45 # of SATA ports Intel® I/O Intel® SAS RAID Module
Intel Product Code DIMM RAID
sockets Slots LAN ports (6 Gb) Module Support support
Slots Support
Server Board only
S2600WT2R 2 24 3 2 (1 Gb) 10 Yes Yes Yes
S2600WTTR 2 24 3 2 (10 Gb) 10 Yes Yes Yes
S2600WTTCR 2 24 3 2 (10 Gb) 10 Yes Yes Yes
Table 3. Server Chassis & Server/Storage System Product Family Summary
Chassis Drive # of # of # of PCIe*
Power Supply SAS SAS PCIe* SFF
Intel Product Code Form Form Drives Drives Add-in Card 3rd Riser Rails
Modules RAID Expander SSD / NVMe
Factor Factor (front) 1 (rear) Slots
Chassis Only (KDK)
R1304WTXXX 1U 3.5” 4 na opt na opt opt opt na na
R1208WTXXX 1U 2.5” 8 na opt na opt opt opt na opt
R2312WTXXX 2U 3.5” 12 opt opt opt opt opt opt opt na
2
R2000WTXXX 2U opt opt opt opt opt opt opt opt opt opt
2x 10G LOM System
(L6 BIK)
R1304WTTGSR 1U 3.5” 4 na 2 na 1x 750W AC opt opt na na
R1208WTTGSR 1U 2.5” 8 na 2 na 1x 750W AC opt opt na opt
R2208WTTYSR 2U 2.5” 8 opt 8 yes 1x 1100W AC opt opt na opt
R2308WTTYSR 2U 3.5” 8 opt 8 yes 1x 1100W AC opt opt na na
R2312WTTYSR 2U 3.5” 12 2 6 opt 1x 1100W AC opt opt opt na

6
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Chassis Drive # of # of # of PCIe*
Power Supply SAS SAS PCIe* SFF
Intel Product Code Form Form Drives Drives Add-in Card 3rd Riser Rails
Modules RAID Expander SSD / NVMe
Factor Factor (front) 1 (rear) Slots
R2224WTTYSR 2U 2.5” 24 2 6 opt 1x 1100W AC opt opt opt opt
3
R2208WTTYC1R 2U 2.5” 8 opt 6 yes 2x 1100W AC opt opt na opt
2x 1G LOM System
(L6 BIK)
R1304WT2GSR 1U 3.5” 4 na 2 na 1x 750W AC opt opt na na
R1208WT2GSR 1U 2.5” 8 na 2 na 1x 750W AC opt opt na opt
R2208WT2YSR 2U 2.5” 8 opt 8 yes 1x 1100W AC opt opt na opt

Table Note References:

1 – All front drive bays are 12Gb SAS capable
2 – R2000WTXXXR Chassis can support all 8x2.5” drive bay accessory options or 8x3.5” drive bay accessory option
3 – System SKU with included system features to support Intel® Xeon Phi™ Coprocessor cards with passive (no fan) heat sink solutions. High power add-
in cards with active cooling solutions are NOT supported in this SKU.
4 – Storage System SKU includes 4 Intel® SFF NVMe drives. The remaining four drive bays can support SAS / SATA drives only
5 – One PCIe slot is populated with a PCIe Redriver card enabling support for SFF NVMe drives
6 – The chassis includes RFID antenna.

Terms used in the table:

na – Not Applicable
opt – Accessory option sold separately
yes – Option included
KDK – Knock Down Kit – Intel PCSD term for chassis only product
BIK – Server Board in KDK – Intel PCSD term for integrated (L6) system product
L6 – Integrated system with no processors, memory, or storage devices
L8 – Integrated system including storage devices, but no processors or memory

7
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

1.3 Intel® S2600GZ/GL Product Family to Intel® Server S2600WT Product Family Transition Guide
If transitioning from the previous generation Intel® S2600GZ/GL product family, the following table can be used to identify an equivalent system
within the Intel® S2600WT product family.
Table 4. 1U / 2U Server System Product Family Generation to Generation Transition Guide
New
Prior New Generation
Generation 1G
Generation 10G LOM SKU Required accessories to match configuration Advantages included in current generation
LOM SKU
Product Code Product Code
Product Code
AXXRMM4LITE
R1208GL4DS R1208WT2GSR R1208WTTGSR AXXELVRAIL AXXRMM4LITE2 750 vs460 PSU, 24 vs16DIMM
AXXRMM4LITE
R1208GZ4GC R1208WT2GSR R1208WTTGSR AXXELVRAIL AXXRMM4LITE2 FXX750PCRPS
R1208GZ4GS9 R1208WT2GSR R1208WTTGSR
R1304GL4DS9 R1304WT2GSR R1304WTTGSR 750 vs460 PSU, 24vs16DIMM
AXXRMM4LITE
R1304GZ4GC R1304WT2GSR R1304WTTGSR AXXELVRAIL AXXRMM4LITE2 FXX750PCRPS
R1304GZ4GS9 R1304WT2GSR R1304WTTGSR
Rear drives option, 1100W vs 460W PSU, 3rd riser, 24vs16
R2208GL4DS9 R2208WT2YSR R2208WTTYSR dimms
AXXRMM4LITE Rear drives option, 1100W vs 750W PSU, 3rd riser, 24vs16
R2208GL4GS R2208WT2YSR R2208WTTYSR AXXELVRAIL AXXRMM4LITE2 dimms
AXXRMM4LITE
R2208GZ4GC R2208WT2YSR R2208WTTYSR AXXELVRAIL AXXRMM4LITE2 AXX1100PCRPS Rear drives option, 1100W vs 750W PSU, 3rd riser
R2208GZ4GS9 R2208WT2YSR R2208WTTYSR Rear drives option, 1100W vs 750W PSU, 3rd riser
AXXRMM4LITE
R2224GZ4GC4 R2224WTTYSR AXXELVRAIL AXXRMM4LITE2 Rear drives included, 1100W vs 750W PSU, 3rd riser optional
AXXRMM4LITE Rear drives option, 1100W vs 750W PSU, 3rd riser, 24vs16
R2308GL4GS R2308WTTYSR AXXELVRAIL AXXRMM4LITE2 dimms
AXXRMM4LITE
R2308GZ4GC R2308WTTYSR AXXELVRAIL AXXRMM4LITE2 AXX1100PCRPS Rear drives option, 1100W vs 750W PSU, 3rd riser
R2308GZ4GS9 R2308WTTYSR Rear drives option, 1100W vs 750W PSU, 3rd riser
AXXRMM4LITE Rear drives included, 1100W vs 750W PSU, 3rd riser optional,
R2312GL4GS R2312WTTYSR AXXELVRAIL AXXRMM4LITE2 24vs16 dimms
AXXRMM4LITE
R2312GZ4GC4 R2312WTTYSR AXXELVRAIL AXXRMM4LITE2 AXX1100PCRPS Rear drives included, 1100W vs 750W PSU, 3rd riser optional
R2312GZ4GS9 R2312WTTYSR Rear drives included, 1100W vs 750W PSU, 3rd riser optional

1
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

1.4 Intel® supported Xeon® Processors E5-2600 v3, v4, Family

Intel® Xeon® Processors E5-2600 v3

Processor TDP Base Frequency # of Cache

SKU (GHz) Cores (MB)
E5-2699 v3 145 W 2.3 18 45
E5-2698 v3 135 W 2.3 16 40
E5-2697 v3 145 W 2.6 14 35
E5-2695 v3 120 W 2.3 14 35
E5-2690 v3 135 W 2.6 12 30
E5-2687W v3 160 W 3.1 10 25
E5-2683 v3 120 W 2.0 14 35
E5-2680 v3 120 W 2.5 12 30
E5-2670 v3 120 W 2.3 12 30
E5-2667 v3 135 W 3.2 8 20
E5-2660 v3 105 W 2.6 10 25
E5-2650L v3 65 W 1.8 12 30
E5-2650 v3 105 W 2.3 10 25
E5-2643 v3 135 W 3.4 6 20
E5-2640 v3 90 W 2.6 8 20
E5-2637 v3 135 W 3.5 4 15
E5-2630L v3 55 W 1.8 8 20
E5-2630 v3 85 W 2.4 8 20
E5-2623 v3 105 W 3.0 4 10
E5-2620 v3 85 W 2.4 6 15
E5-2609 v3 85 W 1.9 6 15
E5-2603 v3 85 W 1.6 6 15

2
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel® Xeon® Processors E5-2600 v4

Processor SKU TDP Base Frequency (GHz) Cores Cache (MB)
(W)

E5-2699 v4 145 2.2 22 55

E5-2698 v4 135 2.2 20 50
E5-2697A v4 145 2.6 16 40
E5-2697 v4 145 2.3 18 45
E5-2695 v4 120 2.1 18 45
E5-2683 v4 120 2.1 16 40
E5-2690 v4 135 2.6 14 35
E5-2680 v4 120 2.4 14 35
E5-2660 v4 105 2.0 14 35
E5-2650 v4 105 2.2 12 30
E5-2640 v4 90 2.4 10 25
E5-2630 v4 85 2.2 10 25
E5-2620 v4 85 2.1 8 20
E5-2609 v4 85 1.7 8 20
E5-2603 v4 85 1.7 6 15
E5-2650L v4 65 1.7 14 35
E5-2630L v4 55 1.8 10 25
E5-2687W v4 160 3.0 12 30
E5-2667 v4 135 3.2 8 25
E5-2643 v4 135 3.4 6 20
E5-2637 v4 135 3.5 4 15
E5-2623 v4 85 2.6 4 10

3
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

2 Server Building Block Configuration

Server building blocks are offered to give Intel customers the option to configure and assemble a unique server system from the bare chassis up. Each
building block component and optional accessory is purchased separately. At a minimum, building up a functional server system using building blocks
will require the following:

• 1U or 2U Intel Server Chassis – Intel® Server Chassis R1000WT or R2000WT

• Intel® Server Board S2600WT– S2600WT2R or S2600WTTR
• SAS / SATA Data cables
• Power Supply module(s)
• Power cord(s)
• Rack mount kit – Rails or fixed mount
• Processor
• Memory
• Storage Drives

Intel® Server Board S2600WT

1U – Intel® Server Chassis R1000WT 2U – Intel® Server Chassis R2000WT

750W or 1100W Power Supply
Module
Optional Intel accessories that can be added include the following: See chapter 5 for available options.
• Riser cards options
• SAS / SAS RAID support – PCIe* add-in card or module + Appropriate SAS Data cable(s)
• Intel® I/O Module

2
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
• Intel® Remote Management Module 4 Lite

2.1 Building Block Recipe Summary

The following table is used to identify the building block options required to assemble an equivalent server system SKU offered within the Intel® Server
System R1000WT or R2000WT product families.

The first column in the table identifies the available integrated system SKUs. The columns to the right of a specified system SKU identify the Intel
building block kits required to assemble the equivalent system.

Table 5. 1U / 2U Building Block to Integrated System Recipe Guide

Intel L6 System
Building blocks needed to assemble an equivalent system
Product Code
Intel Chassis Server Front Drive Bay Power Supply Riser Slot 1 and Riser Slot 3 Rear Drive Bay
SAS cables for 12Gb
Product Code Board assembly Modules 2 Riser Cards Riser Card Assembly
(1x) (2x) 800mm cable
R1304WTTGSR R1304WTXXX S2600WTTR included NA NA
FXX750PCRPS F1UL16RISER2 AXXCBL1UHRHD
(1x) (2x) 800mm cable
R1304WT2GSR R1304WTXXX S2600WT2R included NA NA
FXX750PCRPS F1UL16RISER2 AXXCBL1UHRHD
(1x) (2x)
R1208WTTGSR R1208WTXXX S2600WTTR included NA NA AXXCBL1UHRHD
FXX750PCRPS F1UL16RISER2
(2x)
R1208WT2GSR R1208WTXXX S2600WT2R included (1x) FXX750PCRPS NA NA AXXCBL1UHRHD
F1UL16RISER2
(1x) (2x)
R2208WTTYSR R2000WTXXX S2600WTTR A2U8X25S3HSDK A2UX8X4RISER optional AXXCBL730HDHD
AXX1100PCRPS A2UL8RISER2
R2000WTXXX + (2x) (2x)
R2208WTTYC1R S2600WTTR A2U8X25S3HSDK A2UX8X4RISER optional AXXCBL730HDHD
AWTCOPRODUCT AXX1100PCRPS A2UL16RISER2
(1x) (2x)
R2208WT2YSR R2000WTXXX S2600WT2R A2U8X25S3HSDK A2UX8X4RISER optional AXXCBL730HDHD
AXX1100PCRPS A2UL8RISER2
R2000WTXXX + (3x) (1x) (2x) (2)AXXCBL730HDHD
R2224WTTYSR S2600WTTR optional A2UREARHSDK
A2UHANDLKIT A2U8X25S3HSDK AXX1100PCRPS A2UL8RISER2 (4) AXXCBL875HDHD
1/2 kit of:
(1x) (2x)
R2308WTTYSR R2000WTXXX S2600WTTR A2U8X35S3HSDK A2UX8X4RISER optional AXXCBL800HDHD &
AXX1100PCRPS A2UL8RISER2
AXXCBL950HDHD
AXXCBL800HDHD
(1x) (2x)
R2312WTTYSR R2312WTXXX S2600WTTR included optional A2UREARHSDK AXXCBL875HDHD
AXX1100PCRPS A2UL8RISER2
AXXCBL950HDHD

3
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

2.2 Intel® Server Board S2600WT Product Family SKUs

Intel Product Code (iPC) Order Information Product Description Product Type
®
Intel Server Board S2600WT2R
• Support for 1 or 2 Intel® Xeon processor E5-2600 v3 or v4 product family
MM# - 943786 • Maximum supported TDP for board 145W (not available in all chassis configurations)
UPC - 00735858308618 • Intel® C612 chipset
EAN - 5032037081375 • 24 DDR4 DIMM Slots
iPC – S2600WT2R MOQ - 1 • 8 AHCI SATA 6Gb ports thru two 4-port SFF-8643 connectors
• AHCI SATA 6Gb ports for ODD, DOM, SSD thru two 7-pin SATA connectors
• 2 Integrated 1Gb ports (Intel® Ethernet Controller I350) Server Board only

• Integrated Baseboard Management controller with IPMI 2.0 support

• Building block
Packaged Gross Weight • Optional advanced management features activated by AXXRMM4LITE key or option
3.1 Kgs, 6.8 Lbs AXXRMM4LITE2 RoHS free key
• Spare FRU
• Dedicated 1Gb management port onboard
Un-packaged Net • Support for up to 3 riser cards with multiple Intel riser card options
Weight • NOTE – 2 CPUs required for riser #2 and riser #3 support
1.7 Kgs, 3.8 Lbs • Support for Intel® I/O expansion module option
• Support for Intel® SAS module option

Box includes: one server board

Note: All necessary mounting hardware, cabling, and shielding will ship with the Intel chassis
and optional accessory kits.

4
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code (iPC) Order Information Product Description Product Type
®
Intel Server Board S2600WTTR
• Support for 1 or 2 Intel® Xeon processor E5-2600 v3 or v4 product family
• Maximum supported TDP for board 145W (not available in all chassis configurations)
MM# - 943785 • Intel® C612 chipset
UPC - 00735858308601 • 24 DDR4 DIMM Slots
EAN - 5032037081368 • 8 AHCI SATA 6Gb ports thru two 4-port SFF-8643 connectors
iPC – S2600WTTR MOQ - 1 • AHCI SATA 6Gb ports for ODD, DOM, SSD thru two 7-pin SATA connectors
• 2 Integrated 10Gb ports (Intel® Ethernet Controller X-540) Server Board Only
• Integrated Baseboard Management controller with IPMI 2.0 support
• Optional advanced management features activated by AXXRMM4LITE key or • Building block
AXXRMM4LITE2 RoHS free key option
Packaged Gross Weight
• Dedicated 1Gb management port • Spare FRU
3.1 Kgs, 6.8 Lbs
• Support for up to 3 riser cards with multiple Intel riser card options

Un-packaged Net Note: 2 CPUs required for riser #2 and riser #3 support
Weight • Support for Intel® I/O expansion module option
1.7 Kgs, 3.8 Lbs • Support for Intel® SAS module option

Box includes: one server board

Note: All necessary mounting hardware, cabling, and shielding will ship with the Intel chassis
and optional accessory kits.

5
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code (iPC) Order Information Product Description Product Type
®
Intel Server Board S2600WTTS1R
• Support for 1 or 2 Intel® Xeon processor E5-2600 v3 or v4 product family
• Maximum supported TDP for board 145W (not available in all chassis configurations)
MM# - 949339 • Intel® C612 chipset
UPC - 735858315463 • 24 DDR4 DIMM Slots
EAN - 5032037086462 • 8 AHCI SATA 6Gb ports thru two 4-port SFF-8643 connectors
iPC – MOQ - 1 • AHCI SATA 6Gb ports for ODD, DOM, SSD thru two 7-pin SATA connectors
S2600WTTS1R • 2 Integrated 10Gb ports (Intel® Ethernet Controller X-540)
• Integrated Baseboard Management controller with IPMI 2.0 support Server Board Only

• Optional advanced management features activated by AXXRMM4LITE key or

• Building block
Packaged Gross Weight AXXRMM4LITE2 RoHS free key
option
3.1 Kgs, 6.8 Lbs • Integrated TPM 1.2 on board- AXXTPME5
• Spare FRU
• Dedicated 1Gb management port
Un-packaged Net • Support for up to 3 riser cards with multiple Intel riser card options
Weight Note: 2 CPUs required for riser #2 and riser #3 support
1.7 Kgs, 3.8 Lbs • Support for Intel® I/O expansion module option
• Support for Intel® SAS module option

Box includes: one server board

Note: All necessary mounting hardware, cabling, and shielding will ship with the Intel chassis
and optional accessory kits.

6
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

2.3 Intel® Server Chassis R1000WT Product Family SKUs – (1U Rack Mount Chassis)
The product tables found in this section provide order code information and detailed descriptions for each available 1U Intel server chassis building
block option. The lower sections of each table identify:

• The ship along components of the specified chassis product code – (product BOM)
• Required Items – Hardware required to be installed to the base system to achieve basic functionality using the default system feature set.
• Optional Accessories – Some of the available accessories which can be installed to enhance the basic feature set of the server board / chassis.
Additional accessories can be found in Chapter 5.

Note:
• Each required item and optional accessory is sold separately from the specified Intel server building block.
• Items identified as iPC (Intel Product Code), are an orderable building block option, accessory or spare FRU.
• In an effort to provide the complete product bill of materials, the ship along components list in each product table will include items identified by
description and by iPN (Intel Part Number). The iPN information is provided for reference only. These components are not orderable as a spare or
accessory.

Figure 3. Intel® Server Chassis R1000WT – 1U Chassis only Building Block (KDK)

7
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code (iPC): Order Code Information:
Product Type: Chassis Only
MM# - 936121
Chassis Form Factor: 1U rack mount
R1304WTXXX UPC - 00735858287944 Chassis dimensions: L=712mm, W=439mm, H=43.2mm
EAN - 5032037067492 Packaged Gross Weight: 19 Kgs, 41.9 Lbs
MOQ - 1 Un-packaged Net Weight: 10.3 Kgs, 22.7 Lbs
1U – 4 x 3.5” HDD or 4 x 2.5” SSD front mount drives Outer Box Dimensions: L=983mm, W=577mm, H=260mm

Intel® Server Chassis Product Definition and Configuration Requirements

Intel product code R1304WTXXX includes the following Required Items – Sold Separately: Optional Intel Accessories – Sold Separately:
components:
• Intel® Server Board S2600WT (choose one) • iPC F1UL16RISER2 – One x16 PCIe* 3.0 slot
(1) – 1U Chassis with Quick Reference Label affixed to top cover
(1) – Air duct o iPC S2600WT2R – with 1G LOM Riser Card – (1 for each riser slot)
(6) – Dual rotor system fans – iPC FR1UFAN10PW o iPC S2600WTTR – with 10G LOM • Intel® I/O Module – See chapter 5.9 for options
(1) – Pre-installed Standard Control Panel assembly (board only – iPC • Power supply module(s) – (Choose one type) • Intel® SAS RAID Card / Module – See section
FXXFPANEL2) two common modules required for 5.10 for options
(1) – Pre-installed Front I/O Panel assembly (1 x VGA and 2 x USB) redundancy • SAS/SATA Data cables – Cable selection is
(w/internal attach cables)
o iPC FXX750PCRPS – 750 W AC Power dependent on desired storage option. See
(1) – SATA Optical drive bay with filler panel
Supply Module Chapter 4.2.1 for available cable options
 Includes optical drive mounting latch kit – iPN H19168-00x
 Includes optical drive power cable – iPN G95880-00x o iPC AXX750DCCRPS – 750 W DC Power • iPC A1UBEZEL – Lockable front system bezel
(4) – 3.5” Hot-swap drive bays with drive carriers and drive blanks Supply Module (Available Late Q2 2015) • iPC AXXRMM4LITE – Intel® Remote
 includes (1) 12 Gb SAS backplane – iPC FR1304S3HSBP2 • Power Cord(s) – See chapter 5.12 Management Module Lite
 includes (4) 3.5” hot swap drive carriers – iPC FXX35HSCAR • Rack Mount Kit – See chapter 5.13 • iPC AXXRMM4LITE2 – Intel® Remote
(1) – Server board to backplane power cable – iPN H38458-00x Management Module Lite “RoHS free
• 1 or 2 Intel® Xeon® Processor E5-2600 v3 or v4
(1) – Server board to backplane I2C cable – iPN H39941-00x
product family • Management Module Lite key. For advanced
(2) – CPU heatsinks – iPC FXXCA84X106HS
• ECC DDR4 memory (RDIMM or LRDIMM) management features
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x
(2) – Riser card mounting brackets – (riser cards sold separately. See • Storage Drives
chapter 5.8.1)
(1) – Power Supply Bay blank insert
(8) – DIMM slot blanks – iPN H43597-00x See Chapter 6 for all available accessory options.
(2) – Chassis handles (1 set) installed – iPN H19171-00x
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
Server board and riser card mounting screws
Spares for each screw type included

8
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code (iPC): Order Code Information:
Product Type: Chassis Only
MM# - 936187
Chassis Form Factor: 1U rack mount
R1208WTXXX UPC - 00735858287951 Chassis dimensions: L=712mm, W=439mm, H=43.2mm
EAN - 5032037067508 Packaged Gross Weight: 19 Kgs, 41.9 Lbs
MOQ - 1 Un-packaged Net Weight: 10.3 Kgs, 22.7 Lbs
1U – 8 x 2.5” front mount drives Outer Box Dimensions: L=983mm, W=577mm, H=260mm

Intel® Server Chassis Product Definition and Configuration Requirements

Intel product code R1208WTXXX includes the following Required Items – Sold Separately: Optional Intel Accessories – Sold Separately:
components:
• Intel® Server Board S2600WT (choose one) • iPC F1UL16RISER2 – One x16 PCIe* 3.0 slot
(1) – 1U Chassis with Quick Reference Label affixed to top cover
(1) – Air duct o iPC S2600WT2R – with 1G LOM Riser Card – (1 for each riser slot)
(6) – Dual rotor system fans – iPC FR1UFAN10PW o iPC S2600WTTR – with 10G LOM • Intel® I/O Module – See chapter 5.9 for options
(1) – Pre-installed Standard control panel assembly (board only iPC • Power supply module(s) – (Choose one type) • Intel® SAS RAID Card / Module – See section
FXXFPANEL2) two common modules required for 5.10 for options
(1) – Pre-installed Front I/O Panel assembly (1 x VGA and 2 x USB) redundancy • SAS/SATA Data cables – Cable selection is
(w/internal attach cables)
o iPC FXX750PCRPS – 750 W AC Power dependent on desired storage option. See
 If removed, can be used as an optical drive bay.
Supply Module Chapter 4.2.2 for available cable options
 Includes optical drive mounting latch kit – iPN H19168-00x
 Includes optical drive power cable – iPN H23851-00x o iPC AXX750DCCRPS – 750 W DC Power • iPC A1UBEZEL – Lockable front system bezel
(8) – 2.5” Hot-swap drive bays with drive carriers and drive blanks Supply Module (Available Late Q2 2015) • iPC AXXRMM4LITE – Intel® Remote
 Includes (1) 12 Gb SAS backplane – iPC F1U8X25S3HSBP • Power Cord(s) – See chapter 5.12 • iPC AXXRMM4LITE2 – Intel® Remote
 Includes (8) 2.5” hot swap drive carriers – iPC FXX25HSCAR2 • Rack Mount Kit – See chapter 5.13 Management Module Lite “RoHS free”
(1) – Server board to backplane power cable – iPN H38457-00x
• 1 or 2 Intel® Xeon® Processor E5-2600 v3 or v4 • Management Module Lite key. For advanced
(1) – Server board to backplane I2C cable – iPN H39941-00x
product family management features
(2) – CPU heatsinks – iPC FXXCA84X106HS
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x • ECC DDR4 memory (RDIMM or LRDIMM) • iPC A1U44X25NVMEDK – (4) PCIe* SSD SFF
(2) – Riser card mounting brackets – (riser cards sold separately. See (NVMe*) + (4) SAS support – replaces existing
chapter 5.8.1) backplane and requires use of one PCIe* slot.
(1) – Power Supply Bay blank insert See system accessories table or System TPS for
(8) – DIMM slot blanks – iPN H43597-00x details
(2) – Chassis handles (1 set) installed – iPN H19171-00x • Storage Drives
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
Server board and riser card mounting screws
Spares for each screw type included
See Chapter 6 for all available accessory options.

9
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

2.4 Intel® Server Chassis R2000WT Product Family SKUs – (2U Rack Mount Chassis)
The product tables found in this section provide order code information and detailed descriptions for each available 2U Intel server chassis building
block option. The lower sections of each table identify:
• The ship along components of the specified chassis product code – (product BOM)
• Required Items – Hardware required to be installed to the base system to achieve basic functionality using the default system feature set
• Optional Accessories – Some of the available accessories which can be installed to enhance the basic feature set of the server board / chassis.
Additional accessories can be found in Chapter 5

Notes:
• Each required item and optional accessory is sold separately from the specified Intel server building block
• Items identified as iPC (Intel Product Code), are an orderable building block option, accessory or spare FRU
• In an effort to provide the complete product bill of materials, the ship along components list in each product table will include items identified by
description and by iPN (Intel Part Number). The iPN information is provided for reference only. These components are not orderable as a spare or
accessory.

Figure 4. Intel® Server Chassis R2000WT – 2U Chassis only Building Block (KDK)

10
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code (iPC): Order Code Information:
MM# - 936022 Product Type: Chassis only
2.4.1 R2312WTXXX UPC - 00735858288729 Chassis Form Factor: 2U rack mount
EAN - 5032037068000 Chassis dimensions: L=712mm, W=439mm, H=89mm
MOQ - 1 Packaged Gross Weight: 21.2 Kgs, 46.7 Lbs
Un-packaged Net Weight: 14.4 Kgs, 32.0 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – 12 x 3.5” HDD or 12 x 2.5” SSD front mount drives

Intel® Server Chassis Product Definition and Configuration Requirements

Intel product code R2312WTXXX includes the following Required Items – Sold Separately: Optional Intel Accessories – Sold Separately:
components: • Riser Cards – Up to three riser cards can be installed
• Intel® Server Board S2600WT (choose one) concurrently – See chapter 5.8
(1) – 2U Chassis with Quick Reference Label affixed to top cover
o iPC S2600WT2R – with 1G LOM • Risers Slots #1 and #2 – Available riser cards
(1) – Air duct
(6) – Hot swap system fans – iPC FR2UFAN60HSW o iPC S2600WTTR – with 10G LOM include:
(2) – Chassis Handles (1 set) installed, with Integrated control panel • Power supply module(s) – (Choose one o iPC A2UL8RISER2 – (3) x8 PCIe* 3.0 slots
& USB Port - iPC A2UHANDLKIT type) two common modules required for o iPC A2UL16RISER2 – (1) x16 PCIe* 3.0 slot +
(12) – 3.5” Hot-swap drive bays with drive carriers and drive blanks redundancy (1) x8 PCIe* 3.0 slot
• Includes (1) 12 Gb SAS backplane – iPC o iPC AXX1100PCRPS – 1100W AC • Riser Slot #3 – Available riser cards include:
F2U12X35S3HSBP – (SAS Data cables sold separately) Power Supply Module
o iPC A2UX8X4RISER – (1) Low profile x8 PCIe*
• Includes (12) 3.5” hot swap drive carriers – iPC o iPC FXX750PCRPS – 750 W AC Power 3.0 slot + (1) LP x8 PCIe* 2.0 slot
FXX35HSCAR Supply Module
• Rear Storage Bay Option – See chapter 5.4
(1) – Backplane I2C cable – iPN G92510-00x o iPC AXX750DCCRPS – 750 W DC
(1) – Backplane power cable – iPN G92685-00x • iPC A2UREARHSDK – Up to (2) hot swap SATA SSDs
Power Supply Module (Available Late
(1) – Internal fixed mount SSD power cable – iPN H23901-00x Q2 2015) • Intel® I/O Module – See chapter 5.9 for options
(2) – CPU heatsinks – iPC FXXCA84X106HS • Intel® SAS RAID Card / Module – See section 5.10 for
• Power Cord(s) – See chapter 5.12
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x options
(2) – Riser Card mounting brackets supporting up to 3 riser cards – • Rack Mount Kit – See chapter 5.13
• Intel® SAS Expander option – See section 4.2.4.2
(risers cards sold separately – See chapter 5.8.2) • 1 or 2 Intel® Xeon® Processor E5-2600 v3 or
(1) – Power Supply Bay blank insert v4 product family • SAS/SATA Data cables – Cable selection is
(16) – DIMM slot blanks - iPN H43597-00x dependent on desired storage option. See Chapter
• ECC DDR4 memory (RDIMM or LRDIMM)
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x 4.2.4 for available cable options
(2) – AC Power Cord retention strap assembly – iPN H23961-00x • iPC A2UBEZEL – Lockable front system bezel
Server Board and Riser Card mounting screws • iPC AXXRMM4LITE – Intel® Remote Management
Spares for each screw type included
• iPC AXXRMM4LITE2 – Intel® Remote Management
Module Lite “RoHS free”
• Module Lite key. For advanced management
features
• Storage Drives
See Chapter 5 for all available accessory options.

11
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code (iPC): Order Code Information:

MM# - 936021 Product Type: Chassis only
R2000WTXXX UPC - 00735858287968 Chassis Form Factor: 2U rack mount
EAN - 5032037067515 Chassis dimensions: L=712mm, W=439mm, H=89mm
MOQ - 1 Packaged Gross Weight: 19 Kgs, 41.9 Lbs
Un-packaged Net Weight: 13.3 Kgs, 29.3 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – No front mount drives

Intel® Server Chassis Product Definition and Configuration Requirements

Intel product code R2000WTXXX includes the following Required Items – Sold Separately: Optional Intel Accessories – Sold Separately
components:
• Intel® Server Board S2600WT (choose
(1) – 2U Chassis with Quick Reference Label affixed to top • Front storage bay option
one)
cover o Upto (3) 8 x 2.5” drive bay modules can be installed:
o iPC S2600WT2R – with 1G LOM
(1) – Air duct  iPC A2U8X25S3HSDK – SAS/SATA
o iPC S2600WTTR – with 10G LOM
(6) – Hot swap system fans – iPC FR2UFAN60HSW  iPC A2U8X25S3DPDK – Dual port SAS
(1) – Pre-installed Standard control panel assembly – (board • Power supply module(s) – (Choose one  iPC A2U44X25NVMEDK – PCIe* SSD SFF (NVMe) +
only iPC FXXFPANEL2 type) two common modules required for
SAS
(1) – Pre-installed Front I/O Panel assembly (1 x VGA and 2 x redundancy
Note: for a 24 x 2.5” drive configuration, system will
USB) (w/internal attach cables) o iPC AXX1100PCRPS – 1100W AC
lose front video and optical drive support, and system
(1) – SATA Optical drive bay with filler panel and optical drive Power Supply Module
must include the 2U storage front panel in storage
mounting latch o iPC FXX750PCRPS – 750 W AC handle kit iPC A2UHANDLKIT
(1) – I2C cable - server board to backplane – iPN G41809-00x Power Supply Module
(backplane sold separately) o iPC A2U8X35S3HSDK – 8 x 3.5” drive + Optical drive
o iPC AXX750DCCRPS – 750 W DC bay
(1) – Internal fixed mount SSD / optical drive power cable -
Power Supply Module (Available
iPN H23901-xxx Note: Re-uses control panel and front I/O panel.
Late Q2 2015)
(2) – Riser Card mounting brackets supporting up to 3 riser Includes SAS/SATA data cables and peripheral power
cards (riser cards sold separately – see chapter 5.8.2)  Power Cord(s) – See cable
(2) – CPU heatsinks – iPC FXXCA84X106HS chapter 5.12 • Rear Storage Bay Option
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x iPC A2UREARHSDK – Up to (2) hot swap SATA SSDs
 Rack Mount Kit – See o
(1) – Power supply bay blank insert • Riser Cards – Up to three riser cards can be installed
(16) – DIMM slot blanks – iPN H43597-00x chapter 5.13
concurrently
(2) – Rack chassis handles (1 set) installed – iPN H18229-xxx  1 or 2 Intel® Xeon® o Risers Slots #1 and #2 – Available riser cards include:
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x Processor E5-2600 v3 or v4  iPC A2UL8RISER2 – (3) x8 PCIe* 3.0 slots
(2) – AC Power Cord retention strap assembly – iPN H23961- product family  iPC A2UL16RISER2 – (1) x16 PCIe* slot + (1) x8
00x
Server Board and Riser Card mounting screws
 ECC DDR4 memory PCIe* slot
Spares for each screw type included (RDIMM or LRDIMM) o Riser Slot #3 – Available riser cards include:
 iPC A2UX8X4RISER – (1) Low profile x8 PCIe* 3.0
slot + (1) LP x8 PCIe* 2.0 slot
• SAS/SATA Data cables – Cable selection is dependent on
desired storage option. See Chapter 4 for available cable

12
Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
options
• Intel® SAS RAID Card / Module – See section 5.10 for options
• Intel SAS Expander Options – See sections 4.2.4.2 & 4.2.5.2
• Intel® I/O Module – See chapter 5.9 for options
• iPC A2UBEZEL – Lockable front system bezel
• iPC AXXRMM4LITE – Intel® Remote Management Module Lite
• iPC AXXRMM4LITE2 – Intel® Remote Management Module
Lite, “RoHS free”, key for advanced management features

See Chapter 6 for all available accessory options.

13
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

3 Server System Configuration

Intel makes available L6 integrated server systems that include a specific server board, power supply module, and hot swap drive bays options. At a
minimum, building up a functional L6 server system will require the following:

• Rack mount kit option – Rails or fixed mount

• Power Cord(s)
• Processor(s)
• Memory
• Storage Drives

Intel®Server/Storage System Intel® Server System

R1000WT Product Family R2000WT Product Family

*R1208WT configuration shown *R2312WT configuration shown

Optional Intel accessories that can be added include the following:

• 2nd power supply module to add power redundancy
• SAS / SAS RAID support – PCIe* add-in card or module + Appropriate SAS Data cable(s)
• Intel® I/O Module
• Intel® Remote Management Module Lite

See chapter 5 for a full list of available options

14
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

3.1 Intel® Server/Storage System R1000WT Product Family SKUs – (1U Rack Mount System)
The product tables found in this section provide order code information and detailed descriptions for the specified L6 integrated 1U Intel server system.
The lower sections of each table identify:

• The ship along components of the specified system product code – (product BOM)
• Required Items – Hardware required to be installed to the base system to achieve basic functionality using the default system feature set
• Optional Accessories – Some of the available accessories which can be installed to enhance the basic feature set of the server board / chassis. A
full list of accessory options can be found in Chapter 5

Notes:
• Each required item and optional accessory is sold separately from the specified Intel L6 or L8 server system
• Items identified as iPC (Intel Product Code), are an orderable building block option, accessory or spare FRU
• In an effort to provide the complete product bill of materials, the ship along components listed in each product table will include items identified by
description and by iPN (Intel Part Number). The iPN information is provided for reference only. These components are not orderable as a spare or
accessory.

Figure 5. Intel® Server System R1000WT – L6 Integrated 1U System *R1208WTxxx shown

15
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code (iPC): Order Code Information:
Product Type: L6 Integrated System
MM# - 943891
R1304WTTGSR Chassis Form Factor: 1U rack mount
UPC – 00735858300865
Chassis dimensions: L=712mm, W=439mm, H=43.2mm
EAN – 5032037075954 Packaged Gross Weight: 21.3 Kgs, 47.0 Lbs
MOQ – 1 Un-packaged Net Weight: 12.3 Kgs, 27.1 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
1U – 4 x 3.5” HDD or 4 x 2.5” SSD SAS/SATA front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R1304WTTGSR includes the following components: Required Items – Sold Optional Intel Accessories – Sold Separately
Separately: Note: By default the front drive bays are cabled to on-
(1) –1U Chassis with Quick Reference Label affixed to top cover
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR
board SATA only ports. An add-in SAS card or Module
(2) – Riser card assembly with single x16 PCIe* slot riser card – iPC • Rack Mount Kit – See chapter is needed to support SAS devices.
F1UL16RISER2 5.13 for available options • iPC FXX750PCRPS – 2nd 750W AC Power supply
(1) – 750W power supply module - iPC FXX750PCRPS • 1 or 2 Intel® Xeon® Processor module – to support power redundancy
(1) – Power supply bay blank insert E5-2600 v3/v4 product family • Intel® 12G SAS RAID module + RMFBU - See chapter 5.10
(2) – AC Power Cord retention strap assembly – iPN H23961-00x • ECC DDR4 memory (RDIMM or for available options
(4) – 3.5” Hot-swap drive bays with drive carriers and drive blanks LRDIMM) • SAS Data cable – Depending on the location of the SAS
 Includes (1) 12 Gb SAS backplane – iPC FR1304S3HSBP2
• Power Cord(s) – See chapter Data controller, a new data cable may be necessary. See
 Includes (4) 3.5” hot swap drive trays – iPC FXX35HSCAR
5.10 chapter 4.2.1
(1) – 800mm SAS/SATA Multiport data cable – iPC AXXCBL1UHRHD
(1) – 350mm Backplane power cable – iPN H38458-00x Note: L6 Systems shipping from Intel • Intel® I/O Module - See chapter 5.9 for available options
(1) – 150mm Backplane I2C cable – iPN H39941-00x to North America will include (1) AC • iPC A1UBEZEL – Lockable front system bezel
(1) – Air duct power cord
• iPC AXXRMM4LITE - Intel® Remote Management Module
(6) – Dual rotor system fans – iPC FR1UFAN10PW
• iPC AXXRMM4LITE2 – Intel® Remote RoHS free
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2)
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB) • Lite key – For advanced management features
(1) – SATA Optical drive bay with filler panel – (optical drive sold separately) • iPC RKSATA4R5 – Embedded SATA ESRT2 SW RAID 5
 Includes optical drive mounting latch kit – iPN H19168-00x support key
 Includes 550mm optical drive power cable – iPN G95880-00x • Storage Drives
(2) – CPU heatsinks – iPC FXXCA84X106HS
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x
See Chapter 5 for all available accessory options.
(8) – DIMM slot blanks – iPN G75158-00x
(2) – Chassis handle (1 set) installed – iPN H19171-00x
Spares for each screw type included

16
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Product Code (iPC): Order Code Information:
Product Type: L6 Integrated System
MM# – 943892
R1304WT2GSR Chassis Form Factor: 1U rack mount
UPC – 00735858300872
Chassis dimensions: L=712mm, W=439mm, H=43.2mm
EAN – 5032037075961 Packaged Gross Weight: 21.3 Kgs, 47.0 Lbs
MOQ – 1 Un-packaged Net Weight: 12.3 Kgs, 27.1 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
1U – 4 x 3.5” HDD or 4 x 2.5” SSD SAS/SATA front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R1304WT2GSR includes the following components: Required Items – Sold Optional Intel Accessories – Sold Separately
Separately: Note: By default the front drive bays are cabled to
(1) –1U Chassis with Quick Reference Label affixed to top cover
(1) – Intel® Server Board S2600WT w/ Dual 1GbE – iPC S2600WT2R
on-board SATA only ports. An add-in SAS card or
(2) – Riser card assembly with single x16 PCIe* slot riser card – iPC • Rack Mount Kit – See chapter 5.13 Module is needed to support SAS devices.
F1UL16RISER2 for available options
(1) – 750W power supply module - iPC FXX750PCRPS • 1 or 2 Intel® Xeon® Processor E5- • iPC FXX750PCRPS – 2nd 750W AC Power supply
(1) – Power supply bay blank insert 2600 v3 or v4 product family
module – to support power redundancy
(2) – AC Power Cord retention strap assembly – iPN H23961-00x • ECC DDR4 memory (RDIMM or
• Intel® 12G SAS RAID module + RMFBU - See chapter
(4) – 3.5” Hot-swap drive bays with drive carriers and drive blanks LRDIMM)
5.10 for available options
 Includes (1) 12 Gb SAS backplane – iPC FR1304S3HSBP2
• Power Cord(s) – See chapter 5.10
 Includes (4) 3.5” hot swap drive trays – iPC FXX35HSCAR • SAS Data cable – Depending on the location of the
(1) – 800mm SAS/SATA Multiport data cable – iPC AXXCBL1UHRHD Note: L6 Systems shipping from Intel to SAS Data controller, a new data cable may be
(1) – 350mm Backplane power cable – iPN H38458-00x North America will include (1) AC power necessary. See chapter 4.2.1
(1) – 150mm Backplane I2C cable – iPN H39941-00x cord
• Intel® I/O Module - See chapter 5.9 for available
(1) – Air duct options
(6) – Dual rotor system fans – iPC FR1UFAN10PW
• iPC A1UBEZEL – Lockable front system bezel
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2)
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB) • iPC AXXRMM4LITE - Intel® Remote Management
(1) – SATA Optical drive bay with filler panel – (optical drive sold separately) Module 4 Lite key – For advanced management
 Includes optical drive mounting latch kit – iPN H19168-00x features
 Includes 550mm optical drive power cable – iPN G95880-00x • iPC AXXRMM4LITE2 - Intel® Remote Management
(2) – CPU heatsinks – iPC FXXCA84X106HS “RoHS free”
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x • iPC RKSATA4R5 – Embedded SATA ESRT2 SW RAID
(8) – DIMM slot blanks – iPN G75158-00x 5 support key
(2) – Chassis handle installed (1 set) – iPN H19171-00x
• Storage Drives
Spares for each screw type included

See Chapter 5 for all available accessory options.

17
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Product Code (iPC): Order Code Information:
Product Type: L6 Integrated System
MM# – 943893
R1208WTTGSR Chassis Form Factor: 1U rack mount
UPC – 00735858300889
Chassis dimensions: L=712mm, W=439mm, H=43.2mm
EAN – 5032037075978 Packaged Gross Weight: 21.1 Kgs, 46.5 Lbs
MOQ – 1 Un-packaged Net Weight: 12.9 Kgs, 28.4 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
1U – 8 x 2.5” SAS/SATA front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R1208WTTGSR includes the following Required Items – Sold Optional Intel Accessories – Sold Separately
components: Separately: Note: By default the front drive bays are cabled to
on-board SATA only ports. An add-in SAS card or
(1) –1U Chassis with Quick Reference Label affixed to top cover  Rack Mount Kit – See chapter 5.13 Module is needed to support SAS devices.
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR for available options
(2) – Riser card assembly with single x16 PCIe* 3.0 slot riser card -
 1 or 2 Intel® Xeon® Processor E5-
F1UL16RISER2 • iPC FXX750PCRPS – 2nd 750W AC Power supply
2600 v3 or v4 product family
(1) – 750W power supply module - iPC FXX750PCRPS module – to support power redundancy
(1) – Power supply bay blank insert  ECC DDR4 memory (RDIMM or
• Intel® 12G SAS RAID module + RMFBU - See chapter
(2) – AC Power Cord retention strap assembly – iPN H23961-00x LRDIMM)
5.10 for available options
(1) – Air duct  Power Cord(s) – See chapter 5.10
• SAS Data cables – Depending on the location of the
(6) – Dual rotor system fans – iPC FR1UFAN10PW Note: L6 Systems shipping from Intel to SAS Data controller, new data cables may be
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2) North America will include (1) AC power necessary. See chapter 4.2.2
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB) cord
 If removed, can be used as an optical drive bay. • Intel® I/O Module - See chapter 5.9 for available
 Includes optical drive mounting latch kit – iPN H19168-00x options
 Includes optical drive power cable – iPN H23851-00x • iPC A1U44X25NVMEDK – (4) PCIe* SSD SFF
(8) – 2.5” Hot-swap drive bays with drive carriers and drive blanks (NVMe*) + (4) SAS support – replaces existing
 Includes (1) 12 Gb SAS backplane – iPC F1U8X25S3HSBP backplane and requires use of one PCIe* slot. See
 Includes (8) 2.5” hot swap drive trays – iPC FXX25HSCAR2 chapter 5.1 and/or System TPS for details

(1) – 730mm SAS/SATA Multiport data cable – iPC AXXCBL730HRHD • iPC A1UBEZEL – Lockable front system bezel
(1) – 800mm SAS/SATA Multiport data cable – iPC AXXCBL800HRHD • iPC AXXRMM4LITE - Intel® Remote Management
(1) – Backplane power cable – iPN H38458-00x Module Lite key – For advanced management
(1) – 200mm Backplane I2C cable – iPN H23846-00x features
(2) – CPU heatsink – iPC FXXCA84X106HS • iPC AXXRMM4LITE2 - Intel® Remote Management
(8) – DIMM slot blanks – iPN G75158-00x “RoHS free”
(2) – Chassis handle (1 set) installed - iPN H19171-00x
• iPC RKSATA4R5 – Embedded SATA ESRT2 SW RAID
Spares for each screw type included
5 support key
• Storage Drives

See Chapter 5 for all available accessory options.

18
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Product Code (iPC): Order Code Information:

Product Type: L6 Integrated System
MM# - 943894
3.1.1 R1208WT2GSR Chassis Form Factor: 1U rack mount
UPC – 00735858300896
Chassis dimensions: L=712mm, W=439mm, H=43.2mm
EAN – 5032037075985 Packaged Gross Weight: 21.1 Kgs, 46.5 Lbs
MOQ – 1 Un-packaged Net Weight: 12.9 Kgs, 28.4 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260
1U – 8 x 2.5” SAS/SATA front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R1208WT2GSR includes the following Required Items – Sold Optional Intel Accessories – Sold Separately
components: Separately: Note: By default the front drive bays are cabled to
on-board SATA only ports. An add-in SAS card or
(1) – 1U Chassis with Quick Reference Label affixed to top cover • Rack Mount Kit – See chapter 5.13 Module is needed to support SAS devices.
(1) – Intel® Server Board S2600WT w/ Dual 1GbE – iPC S2600WT2R for available options
(2) – Riser card assembly with single x16 PCIe* 3.0 slot riser card -
• 1 or 2 Intel® Xeon® Processor E5- • iPC FXX750PCRPS – 2nd 750W AC Power supply
F1UL16RISER2
2600 v3 or v4 product family
(1) – 750W power supply module - iPC FXX750PCRPS module – to support power redundancy
(1) – Power supply bay blank insert • ECC DDR4 memory (RDIMM or
• Intel® 12G SAS RAID module + RMFBU - See chapter
(2) – AC Power Cord retention strap assembly – iPN H23961-00x LRDIMM)
5.10 for available options
(1) – Air duct • Power Cord(s) – See chapter 5.10
• SAS Data cables – Depending on the location of the
(6) – Dual rotor system fan – iPC FR1UFAN10PW Note: L6 Systems shipping from Intel to SAS Data controller, new data cables may be
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2) North America will include (1) AC power necessary. See chapter 4.2.2
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB) cord
 If removed, can be used as an optical drive bay. • Intel® I/O Module - See chapter 5.9 for available
 Includes optical drive mounting latch kit – iPN H19168-00x options
 Includes optical drive power cable – iPN H23851-00x • iPC A1U44X25NVMEDK – (4) PCIe* SSD SFF
(8) – 2.5” Hot-swap drive bays with drive carriers and drive blanks (NVMe*) + (4) SAS support – replaces existing
 Includes (1) 12 Gb SAS backplane – iPC F1U8X25S3HSBP backplane and requires use of one PCIe* slot. See
 Includes (8) 2.5” hot swap drive trays – iPC FXX25HSCAR2 chapter 5.1 and/or System TPS for details

(1) – 730mm SAS/SATA Multiport data cable – iPC AXXCBL730HRHD • iPC A1UBEZEL – Lockable front system bezel
(1) – 800mm SAS/SATA Multiport data cable – iPC AXXCBL800HRHD • iPC AXXRMM4LITE - Intel® Remote Management
(1) – Server board to backplane power cable – iPN H38458-00x Module Lite key – For advanced management
(1) – Server board to backplane I2C cable – iPN H39941-00x features
(2) – CPU heatsink – iPC FXXCA84X106HS • iPC AXXRMM4LITE2 - Intel® Remote Management
(8) – DIMM slot blanks – iPN G75158-00x “RoHS free”
(2) – Chassis handle (1 set) installed – iPN H19171-00x
• iPC RKSATA4R5 – Embedded SATA ESRT2 SW RAID
Spares for each screw type included
5 support key
• Storage Drives

See Chapter 5 for all available accessory options.

19
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

3.2 Intel® Server System R2000WT Product Family SKUs – (2U Rack Mount System)
The product tables found in this section provide order code information and detailed descriptions for the specified L6 integrated 2U Intel server system.
The lower sections of each table identify:

• The ship along components of the specified chassis product code – (product BOM)
• Required Items – The options required to be installed to the base system to achieve basic functionality using the default system feature set
• Optional Accessories – Some of the available accessories which can be installed to enhance the basic feature set of the server board / chassis.
Additional accessories can be found in Chapter 5

Notes:
• Each required item and optional accessory is sold separately from the specified Intel L6 server system.
• Items identified as iPC (Intel Product Code), are an orderable building block option, accessory or spare FRU.
• In an effort to provide the complete product bill of materials, the ship along components list in each product table will include items identified by
description and by iPN (Intel Part Number). The iPN information is provided for reference only. These components are not orderable as a spare or
accessory.

Figure 6. Intel® Server System R2000WT – L6 Integrated 2U System *R2312WTxxx shown

20
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Product Code (iPC):
Order Code Information: Product Type: L6 Integrated System
3.2.1 R2208WT2YSR MM# – 943827 Chassis Form Factor: 2U rack mount
UPC – 00735858300919 Chassis dimensions: L=712mm, W=439mm, H=89mm
EAN – 5032037076005 Packaged Gross Weight: 22.9 Kgs, 50.5 Lbs
MOQ – 1
Un-packaged Net Weight: 16.2 Kgs, 35.7 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – 8 x 2.5” front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R2208WT2YSR includes the following: Required Items – Sold Optional Intel Accessories – Sold Separately
Separately: Note: By default the front drive bays are cabled to
(1) – 2U Chassis with Quick Reference Label affixed to top cover on-board SATA only ports. An add-in SAS card or
(1) – Intel® Server Board S2600WT w/ Dual 1GbE – iPC S2600WT2R • Rack Mount Kit – See chapter 5.13 for Module is needed to support SAS devices.
(1) – 1100W AC Power Supply Module – iPC AXX1100PCRPS available options • iPC AXX1100PCRPS – 1100W AC Power Supply
(1) – Power supply bay blank insert
• 1 or 2 Intel® Xeon® Processor E5- Module – to support power redundancy
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
2600 v3 or v4 product family • Intel® I/O Module - See chapter 0 for available
(2) – PCIe Riser card brackets
 Includes (2) 3-slot PCIe* riser cards – iPC A2UL8RISER2 • ECC DDR4 memory (RDIMM or options
 Includes (1) 2-slot low profile PCIe* riser card – iPC A2UX8X4RISER LRDIMM) • Intel® 12G SAS RAID module + RMFBU - See chapter
(1) – Air duct • Power Cord(s) – See chapter 5.10 5.10 for available options
(6) – Hot swap system fans – iPC FR2UFAN60HSW Note: L6 Systems shipping from Intel to • SAS Data cables – Depending on the location of the
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2) North America will include (1) AC power SAS Data controller, new data cables may be
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB) cord necessary. See chapter 4.2.5
(1) – SATA Optical drive bay with filler panel – (optical drive sold separately)
• iPC A2U44X25NVMEDK – (4) PCIe* SSD SFF
 Includes optical drive mounting latch kit – iPN H19168-00x
(NVMe*) + (4) SAS support – requires use of one
 Includes 300mm optical drive / internal mount SSD power cable – iPN
PCIe* slot. See chapter 5.2 and/or System TPS for
H23901-00x
details
(8) – 2.5” Hot-swap drive bays with drive carriers and drive blanks
 Includes (1) 12Gb SAS backplane – iPC A2U8X25S3HSDK • 8x2.5” Drive Bay Module upgrade kit. See chapter
 Includes (8) 2.5” hot swap drive trays – iPC FXX25HSCAR2 5.6 for available options.
(2) – Multiport 730mm SAS/SATA data cables – iPC AXXCBL730HDHD • iPC A2UBEZEL – Lockable front system bezel
(1) – Backplane 250mm I2C cable – iPN G41809-00x • iPC AXXRMM4LITE - Intel® Remote Management
(1) – Backplane power cable – iPN H23927-00x Module Lite key – For advanced management
(2) – CPU heatsinks – iPC FXXCA84X106HS features
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x
(8) – DIMM slot blanks – iPN G75158-00x • iPC AXXRMM4LITE2 - Intel® Remote Management
(2) – Chassis handle (1 set) installed – iPN H18229-xxx “RoHS free”
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x • iPC RKSATA4R5 – Embedded SATA ESRT2 SW
Spares for each screw type included RAID-5 support key
• Storage Drives
See Chapter 5 for all available accessory options.

21
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Product Code (iPC):
Order Code Product Type: L6 Integrated System
3.2.2 R2208WTTYSR Information: Chassis Form Factor: 2U rack mount
MM# – 943826 Chassis dimensions: L=712mm, W=439mm, H=89mm
UPC – 00735858300902 Packaged Gross Weight: 22.9 Kgs, 50.5 Lbs
EAN – 5032037075992 Un-packaged Net Weight: 16.2 Kgs, 35.7 Lbs
MOQ – 1 Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – 8 x 2.5” front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R2208WTTYSR includes the following: Required Items – Sold Optional Intel Accessories – Sold Separately
Separately: Note: By default the front drive bays are cabled to
(1) – 2U Chassis with Quick Reference Label affixed to top cover on-board SATA only ports. An add-in SAS card or
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR Module is needed to support SAS devices.
• Rack Mount Kit – See chapter 5.13 for
(1) – 1100W AC Power Supply Module – iPC AXX1100PCRPS
available options • iPC AXX1100PCRPS – 1100W AC Power Supply
(1) – Power supply bay blank insert
• 1 or 2 Intel® Xeon® Processor E5- Module – to support power redundancy
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
(2) – PCIe Riser card brackets 2600 v3 or v4 product family • Intel® I/O Module - See chapter 0 for available
 Includes (2) 3-slot PCIe* riser cards – iPC A2UL8RISER2 • ECC DDR4 memory (RDIMM or options
 Includes (1) 2-slot low profile PCIe* riser card – iPC A2UX8X4RISER LRDIMM) • Intel® 12G SAS RAID module + RMFBU - See chapter
(1) – Air duct • Power Cord(s) – See chapter 5.10 5.10 for available options
(6) – Hot swap system fans – iPC FR2UFAN60HSW
Note L6 Systems shipping from Intel to • SAS Data cables – Depending on the location of the
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2)
North America will include (1) AC power SAS Data controller, new data cables may be
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB)
cord necessary. See chapter 4.2.5
(1) – SATA Optical drive bay with filler panel – (optical drive sold separately)
 Includes optical drive mounting latch kit – iPN H19168-00x • iPC A2U44X25NVMEDK – (4) PCIe* SSD SFF
 Includes 300mm optical drive / internal mount SSD power cable – iPN (NVMe*) + (4) SAS support – requires use of one
H23901-00x PCIe* slot. See chapter 5.2 and/or System TPS for
(8) – 2.5” Hot-swap drive bays with drive carriers and drive blanks details
 Includes (1) 12Gb SAS backplane – iPC A2U8X25S3HSDK • 8x2.5” Drive Bay Module upgrade kit. See chapter
 Includes (8) 2.5” hot swap drive trays – iPC FXX25HSCAR2 5.6 for available options.
(2) – Multiport 730mm SAS/SATA data cables – iPC AXXCBL730HDHD • iPC A2UBEZEL – Lockable front system bezel
(1) – Backplane 250mm I2C cable – iPN G41809-00x
• iPC AXXRMM4LITE - Intel® Remote Management
(1) – Backplane power cable – iPN H23927-00x
Module Lite key – For advanced management
(2) – CPU heatsinks – iPC FXXCA84X106HS
features
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x
(8) – DIMM slot blanks – iPN G75158-00x • iPC AXXRMM4LITE2 - Intel® Remote Management
(2) – Chassis handle (1 set) installed – iPN H18229-xxx “RoHS free”
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x • iPC RKSATA4R5 – Embedded SATA ESRT2 SW
Spares for each screw type included RAID-5 support key
• Storage Drives
See Chapter 5 for all available accessory options.

22
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Product Code (iPC): Product Type: L6 Integrated System

Order Code Information: Special - Features to support passive Intel® Xeon Phi™
3.2.3 R2208WTTYC1R MM# – 943828 coprocessor
NOTE: Intel® Xeon Phi™ cards with Active heat sinks are NOT
UPC – 00735858300926
supported in this SKU.
EAN – 5032037076012
Chassis Form Factor: 2U
MOQ – 1 Chassis dimensions: L=712mm, W=439mm, H=89mm
Packaged Gross Weight: 22.9 Kgs, 50.5 Lbs
2U – 8 x 2.5” front mount drives
Un-packaged Net Weight: 16.2 Kgs, 35.7 Lbs
Outer Box Dimensions: L=983mm, W=577mm, H=260mm
Intel® Server System Product Definition and Configuration Requirements/Options
Intel product code R2208WTTYC1R includes the following: Required Items – Sold Optional Intel Accessories – Sold Separately
(1) – 2U Chassis with Quick Reference Label affixed to top cover Separately: Note: By default the front drive bays are cabled to
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR on-board SATA only ports. An add-in SAS card or
(2) – 1100W AC Power Supply Module – iPC AXX1100PCRPS Module is needed to support SAS devices.
• Rack Mount Kit – See chapter 5.13 for
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
available options
(2) – PCIe Riser card brackets
 Includes (2) 2-slot PCIe* riser cards – iPC A2UL16RISER2 • 1 or 2 Intel® Xeon® Processor E5- • Intel® I/O Module - See chapter 0 for available
 Includes (1) 2-slot low profile PCIe* riser card – iPC A2UX8X4RISER 2600 v3 or v4 product family options
(1) – High air flow air duct (iPC AWTCOPRODUCT) • ECC DDR4 memory (RDIMM or • Intel® 12G SAS RAID module + RMFBU - See chapter
(1) – Intel® Xeon Phi™ / GPGPU Secure Mount Adapter Bracket kit LRDIMM) 5.10 for available options
(2) – 12V-Auxiliary Power Cables – iPC AXXGPGPUCABLE • Power Cord(s) – See chapter 5.10 • SAS Data cables – Depending on the location of the
(6) – Hot swap system fans – iPC FR2UFAN60HSW SAS Data controller, new data cables may be
Note: L6 Systems shipping from Intel to
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2) necessary. See chapter 4.2.5
North America will include (2) AC power
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB)
cords • iPC A2U44X25NVMEDK – (4) PCIe* SSD SFF
(1) – SATA Optical drive bay with filler panel – (optical drive sold separately)
(NVMe*) + (4) SAS support – requires use of one
 Includes optical drive mounting latch kit – iPN H19168-00x
PCIe* slot. See chapter 5.2 and/or System TPS for
 Includes 300mm optical drive / internal mount SSD power cable – iPN
details
H23901-00x
(8) – 2.5” Hot-swap drive bays with drive carriers and drive blanks • 8x2.5” Drive Bay Module upgrade kit. See chapter
 Includes (1) 12 Gb SAS backplane – iPC A2U8X25S3HSDK 5.6 for available options.
 Includes (8) 2.5” hot swap drive trays – iPC FXX25HSCAR2 • iPC A2UBEZEL – Lockable front system bezel
(2) – Multiport 730mm SAS/SATA data cables – iPC AXXCBL730HDHD • iPC AXXRMM4LITE - Intel® Remote Management
(1) – Backplane 250mm I2C cable – iPN G41809-00x Module Lite key – For advanced management
(1) – Backplane power cable – iPN H23927-00x features
(2) – CPU heatsinks – iPC FXXCA84X106HS
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x • iPC AXXRMM4LITE2 - Intel® Remote Management
(8) – DIMM slot blanks – iPN G75158-00x “RoHS free”
(2) – Chassis handle (1 set) installed – iPN H18229-xxx • iPC RKSATA4R5 – Embedded SATA ESRT2 SW
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x RAID-5 support key
Spares for each screw type included • Storage Drives

23
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
See Chapter 5 for all available accessory options.

Product Code (iPC):

Order Code Product Type: L6 Integrated System
R2308WTTYSR Information:
Chassis Form Factor: 2U rack mount
MM# – 943829 Chassis dimensions: L=712mm, W=439mm, H=89mm
UPC – 00735858300933 Packaged Gross Weight: 23.5 Kgs, 51.8 Lbs
EAN – 5032037076029 Un-packaged Net Weight: 16.1 Kgs, 35.5 Lbs
MOQ – 1 Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – 8 x 3.5” HDD or 8 x 2.5” SSD front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R2308WTTYSR includes the following: Required Items – Sold Optional Intel Accessories – Sold Separately
Separately: Note: By default the front drive bays are cabled to
(1) – 2U Chassis with Quick Reference Label affixed to top cover on-board SATA only ports. An add-in SAS card or
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR Module is needed to support SAS devices.
• Rack Mount Kit – See chapter 5.13 for
(1) – 1100W AC Power Supply Module – iPC AXX1100PCRPS
available options
(1) – Power supply bay blank insert
• 1 or 2 Intel® Xeon® Processor E5- • iPC AXX1100PCRPS – 1100W AC Power Supply
(2) – AC Power Cord retention strap assembly – iPN H23961-00x
2600 v3 or v4 product family Module – to support power redundancy
(2) – PCIe Riser card brackets
 Includes (2) 3-slot PCIe* riser cards – iPC A2UL8RISER2 • ECC DDR4 memory (RDIMM or • Intel® I/O Module - See chapter 5.9 for available
 Includes (1) 2-slot low profile PCIe* riser card – iPC A2UX8X4RISER LRDIMM) options
(1) – Air duct • Power Cord(s) – See chapter 5.10 • Intel® 12G SAS RAID module + RMFBU - See chapter
(6) – Hot swap system fans – iPC FR2UFAN60HSW 5.10 for available options
Note: L6 Systems shipping from Intel to
(1) – Standard control panel assembly (board only – iPC FXXFPANEL2)
North America will include (1) AC power • SAS Data cables – Depending on the location of the
(1) – Front I/O Panel assembly (1 x VGA and 2 x USB)
cord SAS Data controller, new data cables may be
(1) – SATA Optical drive bay with filler panel – (optical drive sold separately)
necessary. See chapter 4.2.3
 Includes optical drive mounting latch kit – iPN H19168-00x
 Includes 500mm optical drive / internal mount SSD power cable – iPN • iPC A2UBEZEL – Lockable front system bezel
G95878-00x • iPC AXXRMM4LITE - Intel® Remote Management
(8) – 3.5” Hot-swap drive bays with drive carriers and drive blanks Module Lite key – For advanced management
 Includes (1) 12 Gb SAS backplane – iPC F2U8X35S3HSBP features
 Includes (8) 3.5” hot swap drive carriers – iPC FXX35HSCAR • iPC AXXRMM4LITE2 - Intel® Remote Management
(1) – Backplane power cable – iPN H38457-00x “RoHS free”
(1) – Multiport 800mm SAS/SATA data cables – iPC AXXCBL800HDHD
• iPC RKSATA4R5 – Embedded SATA ESRT2 SW
(1) – Multiport 950mm SAS/SATA data cables – iPC AXXCBL950HDHD
RAID-5 support key
(1) – Backplane I2C cable – iPN G92510-00x
(2) – CPU heatsinks – iPC FXXCA84X106HS • Storage Drives
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x
(8) – DIMM slot blanks – iPN G75158-00x See Chapter 5 for all available accessory options.
(2) – Chassis handle (1 set) installed – iPN H18229-xxx
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x
Spares for each screw type included

24
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Product Code (iPC):
Order Code Product Type: L6 Integrated System
Information:
R2312WTTYSR Chassis Form Factor: 2U rack mount
MM# – 943830 Chassis dimensions: L=712mm, W=439mm, H=89mm
UPC – 00735858300940 Packaged Gross Weight: 24.4 Kgs, 53.8 Lbs
EAN – 5032037076036 Un-packaged Net Weight: 17.0 Kgs, 37.5 Lbs
MOQ – 1 Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – 12 x 3.5” HDD or 12 x 2.5” SSD front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R2312WTTYSR includes the following: Required Items – Sold Optional Intel Accessories – Sold Separately
Separately: Note: When using more than 8 drives a RAID
(1) – 2U Chassis with Quick Reference Label affixed to top cover Module or RAID Module + RAID expander should
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR
• Rack Mount Kit – See chapter 5.13 for be included. Please refer to section 4.2.5.2 and
(1) – 1100W AC Power Supply Module – iPC AXX1100PCRPS
available options 4.2.4.2
(1) – Power supply bay blank insert
(2) – AC Power Cord retention strap assembly – iPN H23961-00x • 1 or 2 Intel® Xeon® Processor E5-
(2) – PCIe Riser card brackets 2600 v3 or v4 product family
• iPC AXX1100PCRPS – 1100W AC Power Supply
 Includes (2) 3-slot PCIe* riser cards – iPC A2UL8RISER2 • ECC DDR4 memory (RDIMM or Module – to support power redundancy
(1) – Air duct LRDIMM)
• Intel® I/O Module - See chapter 0 for available
(6) – Hot swap system fans – iPC FR2UFAN60HSW • Power Cord(s) – See chapter 5.10 options
(2) – Chassis Handles (1 set) installed – includes Integrated control panel &
Note: L6 Systems shipping from Intel to • Intel® 12G SAS RAID module + RMFBU - See chapter
USB Port - iPC A2UHANDLKIT
North America will include (1) AC power 5.10 for available options
(1) – 500mm internal mount SSD power cable – iPN G95878-00x
cord
(12) – 3.5” Hot-swap drive bays with drive carriers and drive blanks • Intel® SAS Expander – See Chapter 4.2.4.2 for
 Includes (1) 12 Gb SAS backplane – iPC F2U12X35S3HSBP available options
 Includes (12) 3.5” hot swap drive carriers – iPC FXX35HSCAR • SAS Data cables – Depending on the location of the
(1) – Multiport 800mm SAS/SATA data cable – iPC AXXCBL800HDHD SAS Data controller, new data cables may be
(1) – Multiport 875mm SAS/SATA data cable – iPC AXXCBL875HDHD necessary. See chapter 4.2.4
(1) – Multiport 950mm SAS/SATA data cable – iPC AXXCBL950HDHD
• iPC A2UBEZEL – Lockable front system bezel
(1) – Backplane I2C cable – iPN G92510-00x
(1) – Backplane power cable – iPN G92685-00x • iPC AXXRMM4LITE - Intel® Remote Management
(2) – 2.5” Rear Mount Hot Swap Drive Bays with drive carriers, drive blanks, Module Lite key – For advanced management
SATA data/SGPIO cable harness, and I2C cable (Intel Accessory Kit – iPC features
A2UREARHSDK) • iPC AXXRMM4LITE2 - Intel® Remote Management
(2) – CPU heatsinks – iPC FXXCA84X106HS “RoHS free”
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x • Storage Drives
(16) – DIMM slot blanks – iPN G75158-00x
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x
See Chapter 5 for all available accessory options.
Spares for each screw type included

25
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Product Code (iPC):
Order Code Product Type: L6 Integrated System
R2224WTTYSR Information:
Chassis Form Factor: 2U
MM# – 943831 Chassis dimensions: L=712mm, W=439mm, H=89mm
UPC – 00735858300957 Packaged Gross Weight: 25.0 Kgs, 55.1 Lbs
EAN – 5032037076043 Un-packaged Net Weight: 18.3 Kgs, 40.3 Lbs
MOQ – 1 Outer Box Dimensions: L=983mm, W=577mm, H=260mm
2U – 24 x 2.5” front mount drives

Intel® Server System Product Definition and Configuration Requirements/Options

Intel product code R2224WTTYSR includes the following: Required Items – Sold Separately: Optional Intel Accessories – Sold Separately
(1) – 2U Chassis with Quick Reference Label affixed to top cover Note: When using more than 8 drives a RAID Module or
(1) – Intel® Server Board S2600WT w/ Dual 10GbE – iPC S2600WTTR • Rack Mount Kit – See chapter 5.13 for RAID Module + RAID expander should be included.
(1) – 1100W AC Power Supply Module – iPC AXX1100PCRPS available options Please refer to section 4.2.5.2 and 4.2.4.2
(1) – Power supply bay blank insert • 1 or 2 Intel® Xeon® Processor E5-
(2) – AC Power Cord retention strap assembly – iPN H23961-00x 2600 v3 or v4 product family
• iPC AXX1100PCRPS – 1100W AC Power Supply
(2) – PCIe Riser card brackets • ECC DDR4 memory (RDIMM or Module – to support power redundancy
 Includes (2) 3-slot PCIe* riser cards – iPC A2UL8RISER2 LRDIMM)
(1) – Air duct • Intel® I/O Module - See chapter 0 for available
• Power Cord(s) – See chapter 5.10 options
(6) – Hot swap system fans – iPC FR2UFAN60HSW
(2) – Chassis Handles (1 set) installed – includes Integrated control panel & Note: L6 Systems shipping from Intel to • Intel® 12G SAS RAID module + RMFBU - See chapter
USB Port - iPC A2UHANDLKIT North America will include (1) AC power 5.10 for available options
(24) – 2.5” Hot-swap drive bays with drive carriers and drive blanks cord
• Intel® SAS Expander – See Chapter 4.2.5.2 for
 Includes (3) 12 Gb SAS backplanes – iPC A2U8X25S3HSDK available options
 Includes (24) 2.5” hot swap drive trays – iPC FXX25HSCAR2
• SAS Data cables – Depending on the location of the
 Includes (2) backplane to backplane I2C jumper cables – iPN G17347-00x
SAS Data controller, new data cables may be
(1) – Backplane power cable – iPN H23927-00x
necessary. See chapter 4.2.5
(2) – 2.5” Rear Mount Hot Swap Drive Bays with drive carriers, drive blanks,
SATA data/SGPIO cable harness, and I2C cable (Intel Accessory Kit – iPC • iPC A2UBEZEL – Lockable front system bezel
A2UREARHSDK) • iPC AXXRMM4LITE - Intel® Remote Management
(2) – Multiport 730mm SAS/SATA data cables – iPC AXXCBL730HDHD Module Lite key – For advanced management
(4) – Multiport 875mm SAS/SATA data cables – iPC AXXCBL875HDHD features
(1) – Backplane 250mm I2C cable – iPN G41809-00x
• iPC AXXRMM4LITE2 - Intel® Remote Management
(1) – Rear Backplane power cable – iPN H24615-00x
“RoHS free”
(2) – CPU heatsinks – iPC FXXCA84X106HS
(2) – CPU heat sink Mylar Spacer inserts – iPN H28618-00x • Storage Drives
(16) – DIMM slot blanks – iPN G75158-00x
(2) – Chassis handle (1 set) – iPN H18229-xxx See Chapter 5 for all available accessory options.
(1) – 3x RMFBU Mounting Bracket – iPN H18238-00x
Spares for each screw type included

26
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4 SAS / SATA Data Cable Guide

By default, all L6 integrated system will include SAS / SATA data cables routed from the front hot swap backplane to the on-board SATA controller connectors. SAS
data cables may need to be ordered separately when adding a SAS RAID module or SAS RAID PCIe* add-in card to an integrated system SKU.
SAS / SATA data cables are NOT included with any of the chassis only building block SKUs. They must be ordered separately to match the desired system configuration.

4.1 SAS / SATA Data Cable Connector Types

There are three storage interface connector types used within this product family:
Single Port SATA Connector

Image Description
7-pin Single Port SATA
Support for up to 6 GB/sec SATA devices

Where used:
• On the server board – (2) single port SATA connectors (SATA 4, SATA 5)
• 2U Rear Mount Hot-Swap Backplane (iPC A2UREARHSDK)
• SATA Optical Drive – CD/DVD
• SATA DOM

Multiport MiniSAS HD Connectors

Image Description

SFF-8643
• Support for up to 12 Gb/Sec SAS and 6 Gb/sec SATA devices
• PCIe* (NVMe) SFF support associated with Intel Accessory Kits A1U44X25NVMEDK
& A2U44X25NVMEDK

Where used:
• On the server board – (2) 4-port SATA connectors (SATA 0-3, sSATA 0-3)
• All 12 Gb/sec SAS capable hot swap backplanes
• All 12 Gb/sec SAS RAID Controllers
• All 12 Gb/sec SAS Expander Cards

27
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Multiport MiniSAS Connector

Image Description

SFF-8087
Support for up to 6 Gb/Sec SAS / SATA devices

Where used:
• All 6 Gb/sec SAS RAID Controllers
• All 6 Gb/sec SAS Expander Cards

When connecting a 6Gb/sec SAS Controller or SAS Expander to a 12 Gb/sec capable hot swap backplane, the data cables used will need a SFF-8643
connector on one end of the cable and a SFF-8087 connector on the other. See Table 11. Storage Data Cable Kit Description and Order Information for
appropriate cable kits.

4.2 1U / 2U Server System SAS / SATA Cable Guide

Product tables in this section will reference SAS/SATA cables using different connector types to meet the connection and routing requirements for the
specified system configuration. Each cable reference and product code will identify the connector type at each end of the cable using the following
identifiers: HR, HD, and MS. The following table identifies the three cable connector types and their identifiers.

HR = Right Angle SFF-8643 Mini SAS HD Connector

HD = Straight SFF-8643 Mini SAS HD Connector

MS = Straight SFF-8087 Mini SAS Connector (compatible with 6Gb/sec SAS controllers and expanders)

Cable Kit Product Code Example - AXXCBL950HDMS

AXXCBL – identifies an accessory cable kit
950 – Identifies the length of the cable
HD – identifies that one end of cable connector supports SFF-8643 connector

28
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
System illustrations in each of the following sections will denote drive numbering as shown below:

Drive numbering in the system illustrations is for general reference only. Actual drive numbering will be dependent on SAS / SATA controller
configuration and how they are cabled to the backplane. Each installed backplane will include a multi-port data connector for each set of four drives.
Example for an 8 drive configuration (as shown above), the backplane will include 2 four-port data connectors. In the illustration, drives showing a
common color for the Drive ID label will share a common data connector on the backside of the backplane.

Each table in the following sections identify the cable connections and recommended cable lengths for each supported storage controller option in the
specified system. Each “recommended” cable length for a given connector pair provides enough cable to attach the two devices and provides the least
amount of access cable, providing the cleanest cable routing.
In the given server system, no cables should be routed in front of the system fans or in between the processors and memory slots. All cables that require
routing from the front of the system to the back, are routed within the cable channels along the chassis sidewalls.

Intel® Server System R1000WT Intel® Server System R2000WT

product family cable routing product family cable routing

29
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.1 1U 4 x 3.5” – R1304WTxxx SAS / SATA Data Cable Guide

Cables for On-board Cables for Mezzanine Cables for Mezzanine Cables for 12 Gb SAS Cables for 6 Gb SAS RAID
System
Drive Support Multi-port SATA Ports 12 Gb SAS ROC 6 Gb SAS RAID RAID PCIe* add-in card to PCIe* add-in card to
Configuration
to Backplane Module to Backplane module to Backplane Backplane Backplane
Cable Connections: Cable Connections: Cable Connections: From Riser #1 From Riser #1
SAS Mezz -> BP 0-3 Cable Connections: Cable Connections:
SATA -> BP 0-3 SAS Mezz -> BP 0-3 800 mm HD --- MS SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
800 mm HR --- HD 800 mm HD --- HD 875 or 950 mm HD --- HD 875 or 950 mm HD --- MS
From data above,
From data above, From data above, select appropriate From Riser #2 From Riser #2
select appropriate select appropriate cable kit from list
Cable Connections: Cable Connections:
cable kit from list cable kit from list below:
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
R1304WTxxx 4 x 3.5” below: below:
730 or 875 mm HD --- HD 730 or 875 mm HD --- MS
R1304WTTGSR 12 Gb SAS AXXCBL800HDMS
capable AXXCBL1UHRHD AXXCBL800HDHD
R1304WT2GSR From data above, select From data above, select
appropriate cable kits appropriate cable kits
Cable included with
from list below: from list below:
L6 Integrated systems
See ** note below See ** note below

AXXCBL730HDHD AXXCBL730HDMS
AXXCBL875HDHD AXXCBL875HDMS
AXXCBL950HDHD AXXCBL950HDMS

** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.

30
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.2 1U 8 x 2.5” – R1208WTxxx SAS / SATA Data Cable Guide

Note: For data cable information associated with Intel® Accessory Kit A2U44X25NVMEDK, see section 5.1.1

Cables for
Cables for On-board Cables for Mezzanine Cables for 12 Gb SAS Cables for 6 Gb SAS RAID
System Mezzanine 12 Gb SAS
Drive Support Multi-port SATA Ports 6 Gb SAS RAID RAID PCIe* add-in card to PCIe* add-in card to
Configuration ROC Module to
to Backplane module to Backplane Backplane Backplane
Backplane
Cable Connections: Cable Connections: Cable Connections: From Riser #1 From Riser #1
SATA -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 Cable Connections: Cable Connections:
730 mm HR --- HD 650 mm HD --- HD 650 mm HD --- MS SAS PCIe -> BP 0-3 SAS PCIe -> BP 0-3
650 mm HD --- HD 650 mm HD --- MS
sSATA -> BP 4-7 SAS Mezz -> BP 4-7 SAS Mezz -> BP 4-7 SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
800 mm HR --- HD 800 mm HD --- HD 800 mm HD --- MS 730 or 800 mm HD --- HD 730 or 800 mm HD --- MS

From data above, From data above, From data above, From Riser #2 From Riser #2
select appropriate select appropriate select appropriate
Cable Connections: Cable Connections:
cable kits from list cable kits from list cable kits from list
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
R1208WTxxx 8 x 2.5” below: below: below:
650 or 730mm HD --- HD 650 or 730mm HD --- MS
R1208WTTGSR 12 Gb SAS SAS PCIe – BP 4-7 ** SAS PCIe – BP 4-7 **
capable AXXCBL1UHRHD AXXCBL650HDHD AXXCBL650HDMS
R1208WT2GSR AXXCBL800HDHD AXXCBL800HDMS
800 or 875 mm HD --- HD 800 or 875 mm HD --- MS
1 of each cable
From data above, select From data above, select
included with L6
appropriate cable kits appropriate cable kits
Integrated systems
from list below: from list below:
See ** notes below See ** notes below

AXXCBL650HDHD AXXCBL650HDMS
AXXCBL730HDHD AXXCBL730HDMS
AXXCBL800HDHD AXXCBL800HDMS
AXXCBL875HDHD AXXCBL875HDMS

** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.

31
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.3 2U 8 x 3.5” – R2308WTxxx Cable Guide

Cables for
Cables for On-board Cables for Mezzanine Cables for 12 Gb SAS RAID Cables for 6 Gb SAS RAID
System Mezzanine 12 Gb
Drive Support Multi-port SATA 6 Gb SAS RAID PCIe* add-in card to PCIe* add-in card to
Configuration SAS ROC Module to
Ports to Backplane module to Backplane Backplane Backplane
Backplane
Cable Connections: Cable Connections: Cable Connections: From Riser #1: From Riser #1
SATA -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 Cable Connections: Cable Connections:
800 mm HD --- HD 800 mm HD --- HD 800 mm HD --- MS SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
650 or 730 mm HD --- HD 650 or 730 mm HD --- MS
sSATA -> BP 4-7 SAS Mezz -> BP 4-7 SAS Mezz -> BP 4-7 SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
950 mm HD --- HD 950 mm HD --- HD 950 mm HD --- MS 800 or 950 mm HD --- HD 800 or 950 mm HD --- MS

From data above, select From Riser #2: From Riser #2:
From data above, From data above, appropriate cable kits
Cable Connections: Cable Connections:
select appropriate select appropriate from list below:
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
cable kits from list cable kits from list
8 x 3.5” 730 or 800 mm HD --- HD 730 or 800 mm HD --- MS
below: below: AXXCBL800HDMS
R2308WTTYSR 12 Gb SAS AXXCBL950HDMS
SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
730 or 800 mm HD --- HD 730 or 800 mm HD --- MS
Capable AXXCBL800HDHD AXXCBL800HDHD
AXXCBL950HDHD AXXCBL950HDHD
From data above, select From data above, select
appropriate cable kits from list appropriate cable kits from
1 of each cable 1 of each cable
below: list below:
included with L6 included with L6
See ** Notes below See ** Notes below
Integrated systems Integrated systems
AXXCBL650HDHD AXXCBL650HDMS
AXXCBL730HDHD AXXCBL730HDMS
AXXCBL800HDHD AXXCBL800HDMS
(1) 800mm Included in L6 AXXCBL950HDMS
AXXCBL950HDHD
(1) 950mm Included in L6

** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.

32
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.4 2U 12 x 3.5 – R2312WTxxx Cable Guide

4.2.4.1 2U 12 x 3.5” - R2312WTxxx SAS / SATA Data Cable Guide (with No SAS Expander)

Cables for Onboard

Cables for Onboard SATA Cables for Onboard SATA Cables for Onboard SATA
Cables for On-board SATA controller +
System Drive Controller + Mezzanine 6 controller + 12 Gb SAS RAID controller + 6 Gb SAS RAID
Multi-port SATA Ports Mezzanine 12 Gb SAS
Configuration Support Gb SAS RAID module to PCIe* add-in card to PCIe* add-in card to
to Backplane ROC Module to
Backplane Backplane Backplane
Backplane
Cable Connections: Cable Connections: Cable Connections: Cable Connections: Cable Connections:
SATA -> BP 0-3 SATA -> BP 0-3 SATA -> BP 0-3 SATA -> BP 0-3 SATA -> BP 0-3
800mm HD --- HD 800mm HD --- HD 800mm HD --- HD 800mm HD --- HD 800mm HD --- HD

sSATA Cntrl -> BP 4-7 SAS Mezz -> BP 4-7 SAS Mezz -> BP 4-7 From Riser #1 From Riser #1
875 mm HD --- HD 875 mm HD --- HD 875 mm HD --- MS SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
800 or 875 mm HD --- HD 800 or 875 mm HD --- MS
SAS Mezz -> BP 8-11 SAS Mezz -> BP 8-11 SAS PCIe -> BP 8-11 SAS PCIe -> BP 8-11
From data above, select 950 mm HD ---HD 950 mm HD ---MS 875 mm HD ---HD 875 mm HD ---MS
appropriate cable kits
from list below: From data above, select From data above, select From Riser #2 From Riser #2
R2312WTxxx 12 x 3.5” appropriate cable kits appropriate cable kits
SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
R2312WTTYSR 12 Gb SAS AXXCBL800HDHD from list below: from list below:
730 or 875 mm HD --- HD 730 or 875 mm HD --- MS
Capable AXXCBL875HDHD
SAS PCIe -> BP 8-11 ** SAS PCIe -> BP 8-11 **
AXXCBL800HDHD AXXCBL800HDHD
650 or 800 mm HD --- HD 650 or 800 mm HD --- MS
1 of each cable AXXCBL875HDHD (1) 800mm Included in L6
included with L6 AXXCBL950HDHD AXXCBL875HDMS
From data above, select From data above, select
Integrated systems AXXCBL950HDMS
appropriate cable kits: appropriate cable kits from
1 of each cable
See ** Notes below list below:
included with L6
AXXCBL650HDHD See ** Notes below
Integrated systems
AXXCBL730HDHD
AXXCBL800HDHD AXXCBL650HDMS
(1) 800mm Included in L6 AXXCBL730HDMS
AXXCBL875HDHD AXXCBL800HDMS
(1) 875mm Included in L6 AXXCBL875HDMS
AXXCBL950HDHD AXXCBL950HDMS
(1) 950mm included in L6)

33
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
** 1 or 2 cable lengths may be specified for a PCIe* add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.

4.2.4.2 2U 12 x 3.5” - R2312WTxxx SAS / SATA Data Cable Guide (with SAS Expander)

SAS drive configurations consisting of more than 8 drives may require the addition of a SAS Expander card. In the 2U 12x3.5” system configuration, the
SAS expander must be installed in any available PCIe* add-in slot. Intel provides two SAS expander options to support this drive configuration:

Intel Product Code Order Information Product Description Product Type

SAS 3.0 12 Gb/s expander

 Featuring 6Gbps data aggregation for 12Gbps data transfer with 6Gb/s devices
iPC – RES3FV288  Low Profile MD2 PCIe* add-in card form factor
MM# – 932895
 28 internal ports and 8 external ports
UPC – 00735858287548  Redundant dual-port capable for HA and high performance systems
 Power from PCIe x1  2U Accessory Kit
EAN – 5032037067287
 HD Mini-SAS 8643 Connectors
MOQ = 5 Kit includes: (1) SAS Expander card, (2) HD-HD 250mm Expander-to-RAID card
Intel® RAID Expander cables, PCI brackets for Low profile and Full height
RES3FV288 Required (sold separately): HD-HD SAS DATA Cables – Expander to backplane – See
Table 6
SAS 2.0 6 Gb/s expander
iPC – RES2SV240  Low Profile MD2 PCIe* add-in card form factor
 24 Port 6Gb expander card with ports configurable for input or output
MM# – 908137  Power from PCIe x1 or 4-pin connector
UPC – 00735858216289  Mini-SAS 8087 connectors
 2U Accessory Kit
EAN – 5032037017053 Kit includes: (1) 6 Gb/s SAS Expander card, (2) MS-MS 300mm Expander-to-6Gb/s
RAID card cables, PCI brackets for Low profile and Full height , (4) MS-MS 650mm
MOQ - 5
Expander-to-Backplane cables (cables not compatible in R2312WTxxx system)
Intel® RAID Expander
RES2SV240
Required (sold separately): MS-HD SAS Data Cables – See Table 6

34
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

iPC – RES2SV240NC SAS 2.0 6 Gb/s expander

 Low Profile MD2 PCIe* add-in card form factor
 24 Port 6Gb expander card with ports configurable for input or output
MM# – 915431  Power from PCIe x1 or 4-pin connector
UPC – 00735858221375  Mini-SAS 8087 connectors  2U Accessory Kit
MOQ - 5 Kit includes: (1) 6 Gb/s SAS Expander card (with no cables), PCI brackets for Low
profile and Full height
Intel® RAID Expander
RES2SV240NC Required (sold separately): MS-HD SAS Data Cables – See Table 6

Note: The onboard SATA ports are not compatible with SAS Expander cards. The onboard SATA ports can only be cabled directly to a specified
backplane.

Table 6. 2U 12 x 3.5” – R2312WTxxx SAS / SATA Data Cable Guide (with SAS Expander)
Mezzanine 12Gb SAS Mezzanine 6 Gb SAS
12Gb SAS RAID PCIe* 6Gb SAS RAID PCIe*
System On-board Multi-port ROC Module + 12 Gb ROC module + 6 Gb
Drive Support add-in card + 12 Gb SAS add-in card + 6 Gb SAS
Configuration SATA Ports SAS Expander to SAS Expander to
Expander to Backplane Expander to Backplane
Backplane Backplane
Onboard SATA With 12 Gb SAS With 6 Gb SAS With 12 Gb PCIe RAID With 6 Gb PCIe RAID
controllers do not Expander RES3FV288 Expander RES2SV240 and 12 Gb SAS Expander and 6 Gb SAS Expander
support SAS installed in Riser #1: installed in Riser #1: RES3FV288 installed in RES2SV240 installed in
expanders. riser #1: riser #1:
- Use cables in - Use cables in
If attaching the Expander Kit to Expander Kit to - Use cables in - Use cables in
onboard SATA attach SAS ROC to attach SAS ROC to Expander Kit to attach Expander Kit to attach
controller to the Expander Card Expander Card PCIe SAS card to PCIe SAS card to
Backplane, then use - Use the - Use the Expander Card Expander Card
R2312WTxxx cables that are included following cables to following cables to - Use the - Use the
12 x 3.5” in the System SKUs. attach Expander to attach Expander to following cables to following cables to
R2312WTTYSR 12 Gb SAS Capable Backplane: Backplane: attach Expander to attach Expander to
For building block Backplane: Backplane:
integration use cable Expander -> BP 0-3 Expander -> BP 0-3
kits: 800 mm HD --– HD 800 mm HD --– MS Expander -> BP 0-3 Expander -> BP 0-3
AXXCBL800HDHD 800 mm HD --– HD 800 mm HD --– MS
AXXCBL875HDHD Expander -> BP 4-7 Expander -> BP 4-7
875 mm HD --- HD 875 mm HD --- MS Expander -> BP 4-7 Expander -> BP 4-7
875 mm HD --- HD 875 mm HD --- MS
Expander -> BP 8-11 Expander -> BP 8-11
950 mm HD ---HD 950 mm HD ---MS Expander -> BP 8-11 Expander -> BP 8-11
950 mm HD ---HD 950 mm HD ---MS
1 of each cable From data above,

35
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
included with L6 select appropriate From data above, select From data above, select
Integrated systems cable kits from list appropriate cable kits appropriate cable kits
below: from list below: from list below:
From data above,
select appropriate AXXCBL800HDMS AXXCBL800HDHD AXXCBL800HDMS
cable kits from list AXXCBL875HDMS AXXCBL875HDHD AXXCBL875HDMS
below: AXXCBL950HDMS AXXCBL950HDHD AXXCBL950HDMS

AXXCBL800HDHD
AXXCBL875HDHD
AXXCBL950HDHD

36
Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Figure 7. Intel® RAID Expander RES3FV288 Connector Identification

Figure 8. Intel® RAID Expander RES2SV240 Connector Identification

37
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.5 2U 2.5” Front Mount Drive Bay Cable Guide

The front drive bay of the 2U system can support up to three 8x2.5” drive bay modules capable of supporting system configurations of 8 (R2208), 16
(R2216), or 24 (R2224) drives. Each 8x2.5” drive bay is numbered in sequence from 1 to 3, as shown below. Each installed 8x2.5” backplane will include
at least two multi-port 8643 data connectors, each supporting a set of four drives. Note that some 8x2.5” backplane options include more than two
8643 connectors in order to support features available to the specific backplane.

Intel makes available several different 8x2.5” drive bay module options, each supporting a different feature set (see chapter 5). The system tables in this
section define the SAS/SATA data cables required to support the specified drive bay location regardless of the backplane option installed.

Reference each table as appropriate to determine the cable requirements relevant to your specific drive bay configuration.

Note: For data cable information associated with Intel® Accessory Kit A2U44X25NVMEDK, see sections 5.2.1 and 5.2.2

38
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.5.1 2U 2.5” Front Mount Drive Configurations – SAS Data Cable Guide (with no SAS Expander)

Table 7. 2U 8 x 2.5" (Drive Bay #1) - SAS/SATA Data Cable Guide (with no SAS Expander)
Cables for On-board Cables for Mezzanine 12 Cables for Mezzanine 6 Cables for 12 Gb SAS Cables for 6 Gb SAS
System
Drive Support Multi-port SATA Ports to Gb SAS ROC Module to Gb SAS RAID module to RAID PCIe* add-in card RAID PCIe* add-in card
Configuration
Drive Bay #1 Drive Bay #1 Drive Bay #1 to Drive Bay #1 to Drive Bay #1
Cable Connections: Cable Connections: Cable Connections: From Riser #1: From Riser #1:
SATA Cntlr -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 Cable Connections: Cable Connections:
730mm HD --- HD 730 mm HD --- HD 730 mm HD --- MS
SAS PCIe -> BP 0-3 SAS PCIe -> BP 0-3
sSATA Cntrl -> BP 4-7 SAS Mezz -> BP 4-7 SAS Mezz -> BP 4-7
730 mm HD --- HD 730 mm HD --- MS
730 mm HD --- HD 730 mm HD --- HD 730 mm HD --- MS
SAS PCIe -> BP 4-7 SAS PCIe -> BP 4-7
730 mm HD --- HD 730 mm HD --- MS
From data above, select From data above, select From data above, select
appropriate cable kits appropriate cable kits from appropriate cable kits from
Drive Bay #1 from list below: list below: list below:
From Riser #2 From Riser #2
SAS PCIe -> BP 0-3 SAS PCIe -> BP 0-3
8 x 2.5” AXXCBL730HDHD AXXCBL730HDHD AXXCBL730HDMS 730 mm HD --- HD 730 mm HD --- MS
R2208… SAS PCIe -> BP 4-7 SAS PCIe -> BP 4-7
R2216… (2) 730mm Cables (2) 730mm Cables 730 mm HD --- HD 730 mm HD --- MS
R2224… included with all 2.5” L6 included with all 2.5” L6
Integrated systems Integrated systems From data above, select From data above, select
appropriate cable kits appropriate cable kits
from list below: from list below:

AXXCBL730HDHD AXXCBL730HDMS

(2) 730mm Cables

included with all 2.5” L6
Integrated systems
** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.
For R2216WTxxx System configurations with no SAS Expander, reference Tables 7 and 8 for cabling guidance

39
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Table 8. 2U 8 x 2.5” (Drive Bay #2) – SAS / SATA Data Cable Guide (with no SAS Expander)

Cables for On-board Cables for Mezzanine 12 Cables for Mezzanine 6 Cables for 12 Gb SAS Cables for 6 Gb SAS
System
Drive Support Multi-port SATA Ports to Gb SAS ROC Module to Gb SAS ROC module to RAID PCIe* add-in card RAID PCIe* add-in card
Configuration
Drive Bay #2 Drive Bay #2 Drive Bay #2 to Drive Bay #2 to Drive Bay #2
Cable Connections: Cable Connections: Cable Connections: From Riser #1: From Riser #1:
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
SATA Cntlr -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 650 or 730mm HD -- HD 650 or 730mm HD -- MS
730mm HD -- HD 730mm HD -- HD 730mm HD -- MS SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
SAS Mezz -> BP 4-7 730 or 800mm HD -- HD 730 or 800mm HD -- MS
sSATA Cntrl -> BP 4-7 SAS Mezz -> BP 4-7 875mm HD -- MS
875mm HD -- HD 875mm HD -- HD From Riser #2: From Riser #2:
From data above, select
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
From data above, select From data above, select appropriate cable kits
Drive Bay 800 or 875mm HD -- HD 800 or 875mm HD -- MS
appropriate cable kits appropriate cable kits from from list below:
#2 SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
from list below: list below:
730 or 875mm HD -- HD 730 or 875mm HD -- MS
(no SAS AXXCBL730HDMS
Expander) 8 x 2.5” AXXCBL730HDHD AXXCBL730HDHD AXXCBL875HDMS
From data above, select From data above, select
(730mm Included in all (730mm Included in all
appropriate cable kits appropriate cable kits
2.5” L6) 2.5” L6)
R2216… from list below: from list below:
AXXCBL875HDHD AXXCBL875HDHD
R2224… (875mm Included in (875mm Included in
AXXCBL650HDHD AXXCBL650HDMS
R2224 L6) R2224 L6)
AXXCBL730HDHD AXXCBL730HDMS
(2) 730mm Included in all AXXCBL800HDMS
2.5” L6 AXXCBL875HDMS
AXXCBL800HDHD
AXXCBL875HDHD
(4) 875mm Included in
R2224 L6)

** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.
For R2224WTxxx System configurations with no SAS Expander, reference Tables 7, 8, and 9 for cable guidance for all three drive bay modules.

40
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Table 9. 2U 8 x 2.5” (Drive Bay #3) – SAS / SATA Data Cable Guide (with no SAS Expander)

Cables for On-board Cables for Mezzanine 12 Cables for Mezzanine 6 Cables for 12 Gb SAS Cables for 6 Gb SAS
System
Drive Support Multi-port SATA Ports to Gb SAS ROC Module to Gb SAS ROC module to RAID PCIe* add-in card RAID PCIe* add-in card
Configuration
Drive Bay #3 Drive Bay #3 Drive Bay #3 to Drive Bay #3 to Drive Bay #3
Cable Connections: Cable Connections: Cable Connections: From Riser #1: From Riser #1:
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
SATA Cntlr -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 730 or 875mm HD -- HD 730 or 875mm HD -- MS
800mm HD -- HD 730mm HD -- HD 730mm HD -- MS SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
SAS Mezz -> BP 4-7 800 or 950mm HD -- HD 800 or 950mm HD -- MS
sSATA Cntrl -> BP 4-7 SAS Mezz -> BP 4-7 730mm HD -- MS
730mm HD -- HD 730mm HD -- HD From Riser #2: From Riser #2:
From data above, select
SAS PCIe -> BP 0-3 ** SAS PCIe -> BP 0-3 **
From data above, select From data above, select appropriate cable kits
730 or 875mm HD -- HD 800 or 875mm HD -- MS
Drive Bay #3 appropriate cable kits appropriate cable kits from from list below:
SAS PCIe -> BP 4-7 ** SAS PCIe -> BP 4-7 **
from list below: list below:
(no SAS 650 or 800mm HD -- HD 650 or 800mm HD -- MS
AXXCBL730HDMS
Expander) AXXCBL730HDHD AXXCBL730HDHD
8 x 2.5” From data above, select From data above, select
(2) 730mm cables (2) 730mm cables Included
appropriate cable kits appropriate cable kits
R2224… Included in all 2.5” L6) in all 2.5” L6)
from list below: from list below:
AXXCBL800HDHD
AXXCBL650HDHD AXXCBL650HDMS
AXXCBL730HDHD AXXCBL730HDMS
(2) 730mm Included in all AXXCBL800HDMS
2.5” L6 AXXCBL875HDMS
AXXCBL800HDHD AXXCBL950HDMS
AXXCBL875HDHD
(4) 875mm Included in
R2224 L6
AXXCBL950HDHD
** 1 or 2 cable lengths may be specified for a PCIe add-in card. Generally, if the cable connector of the add-in card is located on the back edge of the
card, a shorter cable is specified. Cable connectors on the top edge or near the front of the add-in card will require the longer cable length.

41
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.2.5.2 2U 2.5” Front Mount Drive Configurations – SAS Data Cable Guide (with SAS Expander)

SAS drive configurations consisting of more than 8 drives may require the addition of a SAS Expander card. In the 2U 16x2.5” or 24x2.5” system
configurations, a SAS expander can be mounted in the area directly behind the drive bays. Intel provides two SAS expander options to support these
drive configurations:

Intel Product Code Order Information Product Description Product Type

 SAS 3.0 12 Gb/s expander featuring 6Gbps data aggregation for

12Gbps data transferwith 6Gb/s devices
 Internal mount mid-plane form factor
iPC – RES3TV360  36 internal ports supporting point-to-point 12, 6, and 3 Gb/s data
transfer rates
 RA 4-pin power connector
 HD Mini-SAS 8643 Connectors
MM# – 932894
UPC – 00735858287364 Kit includes: (1) SAS expander card; (1) 130mm Power cable; (1 set)  2U Accessory Kit
Expander-to-backplane cables: (4) HD-HD 165mm, (1) HD-HD 300mm, (1)
EAN – 5032037067102
HD-HD 250mm; (3) Rubber Pads; mounting screws
MOQ - 5

Required (sold separately)

 HD-HD 12 Gb/sec Raid Controller-to-Expander cables – See table
Intel® RAID Expander RES3TV360
section 0
 HD-MS 6 Gb/s RAID Controller-to-Expander cables – See table
section 0
 SAS 2.0 6 Gb/s expander
 Internal mount mid-plane form factor
 36 Port 6Gb expander card with ports configurable for input or output
iPC – RES2CV360  Power from 4-pin connector
 Mini-SAS 8087 connectors
MM# – 918935
UPC – 00735858241168 Kit includes: (1) 6 Gb/s SAS Expander card; (1) 130mm power cable; (3)
 2U Accessory Kit
rubber mounting pads; (1 set) 6 Gb Expander to 6 Gb bacplane cables: (3)
EAN – 5032037035897 MS-MS 165mm, (2) MS-MS 185mm, (1) MS-MS 245mm (NOTE: included
MOQ - 1 data cables not compatible in R2312WT… system)

Intel® RAID Expander RES2CV360 Required (sold separately): iPC – AXXCBLEXPHDMS - MS-HD 6Gb
Expander to 12 Gb Backplane Data Cable kit, SAS Data Cables from 6 Gb
SAS RAID PCIe/Mezz Card to expander. See Table 10.

42
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Note: The onboard SATA ports are not compatible with SAS Expander cards. The onboard SATA ports can only be cabled directly to a specified
backplane.

Table 10. 2U 2.5” Front Mount Drive Configurations with SAS Expander – SAS Data Cable Guide
Mezzanine 12Gb SAS 12Gb SAS RAID PCIe* Mezzanine 6 Gb SAS 6Gb SAS RAID PCIe* Mezzanine 6 Gb SAS 6Gb SAS RAID PCIe* add-
ROC Module to 12 Gb add-in card to 12 Gb SAS ROC Module to 12 Gb add-in card to 12 Gb SAS ROC Module to 6 Gb SAS in card to 6 Gb SAS
SAS Expander Expander SAS Expander Expander Expander Expander
12 Gb SAS Expander 12 Gb SAS Expander 12 Gb SAS Expander 12 Gb SAS Expander 6 Gb SAS Expander 6 Gb SAS Expander
RES3TV360 installed: RES3TV360 installed: RES3TV360 installed: RES3TV360 installed: RES2CV360 installed: RES2CV360 installed:
From Riser #1:
SAS Mezz -> Exp 0-3 (G) SAS PCIe -> Exp 0-3 (G) SAS Mezz -> Exp 0-3 (G) SAS Mezz -> Exp 0-3 (A) From Riser #1:
From Riser #1:
730mm HD -- HD 650mm HD -- HD 730mm HD -- MS 730mm MS -- MS SAS PCIe -> Exp 0-3 (G)
SAS PCIe -> Exp 0-3 (G)
SAS PCIe -> Exp 4-7 (H) 650mm HD --MS 650mm MS --MS
SAS Mezz -> Exp 4-7 (H) 650mm HD -- HD SAS Mezz -> Exp 4-7 (H) SAS Mezz -> Exp 4-7 (B) SAS PCIe -> Exp 4-7 (H)
SAS PCIe -> Exp 4-7 (H)
730mm HD -- HD 730mm HD -- MS 730mm MS -- MS 650mm MS --MS
650mm HD --MS
From Riser #2:
From data above, select From data above, select From data above, select
SAS PCIe -> Exp 0-3 (G) From Riser #2: From Riser #2:
appropriate cable kits appropriate cable kits appropriate cable kits
730mm HD -- HD SAS PCIe -> Exp 0-3 (G) SAS PCIe -> Exp 0-3 (G)
from list below: from list below: from list below:
SAS PCIe -> Exp 4-7 (H) 730mm HD --MS 730mm MS --MS
730mm HD -- HD SAS PCIe -> Exp 4-7 (H) SAS PCIe -> Exp 4-7 (H)
AXXCBL730HDHD AXXCBL730HDMS AXXCBL730MSMS
From data above, select 730mm HD -- MS 730mm MS -- MS
(2) 730mm cables
appropriate cable kits from From data above, select
Included in all 2.5” L6)
list below: appropriate cable kits From data above, select
from list below: appropriate cable kits from
AXXCBL650HDHD list below:
AXXCBL730HDHD AXXCBL650HDMS
(2) 730mm cables Included AXXCBL730HDMS AXXCBL650MSMS
in all 2.5” L6) AXXCBL730MSMS
12 Gb SAS Expander to 12 Gb SAS Expander to 12 Gb SAS Expander to 12 Gb SAS Expander to 6 Gb SAS Expander to 6 Gb SAS Expander to
drive bays drive bays drive bays drive bays drive bays drive bays
Use cables included in Use cables included in SAS Use cables included in Use cables included in Cable Kit Required: Cable Kit Required:
SAS Expander Kit Expander Kit SAS Expander Kit SAS Expander Kit iPC – AXXCBLEXPHDMS iPC – AXXCBLEXPHDMS

43
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Figure 9. – 12Gb Internal 36-Port Intel® RAID Expander Card RES3TV360 - Connector Identification Block Diagram

Figure 10. – 6Gb Internal 36-Port Intel® RAID Expander Card RES2CV360 - Connector Identification Block Diagram

44
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

4.3 Intel SAS / SATA Data Cable Kits

Each cable accessory kit referenced in this section will identify the connector type at each end of the cable using the following identifiers: HR, HD, and
MS. The following table identifies the three cable connector types and their identifiers.

HR = Right Angle SFF-8643 Mini SAS HD Connector

HD = Straight SFF-8643 Mini SAS HD Connector

MS = Straight SFF-8087 Mini SAS Connector (compatible with 6Gb/sec SAS controllers and expanders)

Cable Kit Product Code Decoder

Example – iPC AXXCBL950HDMS

AXXCBL – identifies an accessory cable kit

950 – identifies the length of the cable
HD – identifies that one cable connector supports an SFF-8643 type connector
MS – identifies that one cable connector supports an SFF-8087 type connector

45
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Table 11. Storage Data Cable Kit Description and Order Information
Image Order Information Description

iPC – AXXCBL950HDHD
MM – 936122 950 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8643
UPC – 00735858286596
EAN – 5032037066495 Used in multiple systems as spare and/or accessory (1304, 2308, 2312)
MOQ – 1
iPC – AXXCBL875HDHD
MM – 936123
875 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8643
UPC – 00735858284769
Used in multiple systems as spare and/or accessory (1304, 1208 2208, 2312)
EAN – 5032037065054
MOQ – 1
iPC – AXXCBL800HDHD
MM – 937312 800 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8643
UPC – 00735858286015
EAN – 5032037066006 Used in multiple systems as spare and/or accessory (1203, 1208, 2308, 2312)
MOQ – 1
iPC – AXXCBL730HDHD
MM – 936178
730 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8643
UPC – 00735858284745
Used in multiple systems as spare and/or accessory (1208, 2208)
EAN – 5032037065030
MOQ – 1

iPC – AXXCBL650HDHD 650 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8643
MM – 937129
UPC – 00735858284752
EAN – 5032037065047 Used as accessory when installing 12G ROC module in 1208 for optimal cabling. (longer
MOQ – 1 cable may be used)

iPC – AXXCBL1UHRHD
Combo cable kit, contains 2 cables. One of each of the following:
MM – 937311
730mm (AXXCBL800HRHD),
UPC – 00735858287401
800mm right angle SFF8643 to straight SFF8643,
EAN – 5032037067140
Spare cables used in 1U WT systems to connect to onboard SATA ports.
MOQ – 1

46
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Image Order Information Description

iPC – AXXCBL950HDMS
950 mm long, cable kit (2 cables included) straight SFF8643to straight SFF8087
MM – 937131
UPC – 00735858286633
Required in WT 2U systems with 6G SAS ROC module or 6G SAS RAID cards. (1304 with
EAN – 5032037066532
HBA, 2308 and 2312 HBA/module)
MOQ – 1

iPC – AXXCBL875HDMS
875 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8087
MM – 937130
UPC – 00735858286626
Required in WT 2U systems with 6G SAS ROC module or 6G SAS RAID cards. (1304 and
EAN – 5032037066525
1208 with HBA, 2216,2224,2312 with HBA/module)
MOQ – 1

iPC – AXXCBL800HDMS
800 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8087
MM – 937309
UPC – 00735858286084
Required in WT 2U systems with 6G SAS ROC module or 6G SAS RAID cards. (1304 and
EAN – 5032037066075
1208 with module, 2308 and 2312 HBA/module)
MOQ – 1

iPC – AXXCBL730HDMS
730 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8087
MM – 927238
UPC – 00735858266970
Required in WT 2U systems with 6G SAS ROC module or 6G SAS HBA cards. (1208 with
EAN – 5032037053648
HBA, 2208 with HBA/module)
MOQ – 5

iPC – AXXCBL650HDMS
650 mm long, cable kit (2 cables included) straight SFF8643 to straight SFF8087
MM – 927237
UPC – 00735858266963
Used as accessory when installing 6Gb ROC module in 1208 for optimal cabling. (longer
EAN – 5032037053631
cable may be used)
MOQ – 5

47
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Image Order Information Description

iPC – AXXCBLEXPHDMS
6 Gb Expander to 12 Gb Backplane cable kit
MM – 937127
6Gb MS – to – 12Gb HD
UPC – 00735858284776
EAN – 5032037065061
(3) 165 mm, (1) 185 mm, (1) 245 mm, (1) 300 mm straight SFF8643 to straight SFF8087
MOQ – 1

iPC – AXXCBL650MSMS
650 mm long, cable kit (2 cables included) straight SFF8087 to straight SFF8087
MM – 918376
UPC – 00735858224444
Required in WT 2U systems with 6Gb SAS ROC module or 6Gb SAS HBA cards. (1208
EAN – 5032037019910
with HBA, 2208 with HBA/module) and 6 Gb Expander card
MOQ – 5

iPC – AXXCBL730MSMS
730 mm long, cable kit (2 cables included) straight SFF8087 to straight SFF8087
MM – 921049
UPC – 00735858245340
Required in WT 2U systems with 6Gb SAS ROC module or 6Gb SAS HBA cards. (1208
EAN – 5032037039864
with HBA, 2208 with HBA/module) and 6 Gb Expander card
MOQ – 1

iPC – AXXCBL880SATA
MM – 922988
Spare SATA ODD Data cable for rack chassis family – 880mm long
UPC – 00735858250290
Included with ODD accessories
EAN – 5032037044806
MOQ – 10

2U Cable kit accessory

iPC - A2UCBLSSD This kit includes cables necessary to provide simultaneous support for up to two
internal air duct mounted SATA SSDs + rear drive bay (iPC – A2UREARHSDK)
MM# – 937328
Kit includes:
UPC – 00735858287005
(1) Power Cable – Connectors to support rear drive bay and 2 internal mount SSDs (No
EAN – 5032037066747
CD/DVD Drive support)
MOQ - 1
(1) fan out multiport SATA Data cabe – Cable connectors include (1) HD mini-SAS
SFF8643 + (4) 7-pin SATA + (1) SGPIO

48
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5 Intel 1U / 2U System Configuration Options

The following sections identify available accessory kits supported within the Intel® S2600WT product family.

5.1 1U 8x2.5” Combo PCIe* SFF (NVMe) SSD / SAS Backplane – Intel® Accessory Kit
A1U44X25NVMEDK
• The 8x2.5” combo backplane kit is capable of supporting a combination of both SAS devices and up to four PCIe* SFF (Small Form Factor) (NVMe)
SSD drives
• All eight drive connectors are capable of supporting a SAS device, but only four include SFF8639 connectors that can support PCIe* SFF (NVMe)
SSDs
• This kit is only supported in dual processor configurations

Intel Product Code Order Information Product Description Product Type

iPC – A1U44X25NVMEDK
1U 8x2.5” Combo PCIe* SFF (NVMe) SSD / SAS Backplane Kit
Kit IncludesL
(1) Combo Hot Swap Backplane PCBA
MM# – 936251 (4) SAS / SATA Hot Swap Drive Carriers (Green Latch)
UPC – 00735858288873 (4) PCIe* SFF SSD (NVMe) Hot Swap Drive Carriers (Blue Latch)
EAN – 5032037068154 (2) Dual PCIe* Port Cables  1U Accessory Kit
MOQ – 1 (1) PCIe x16 Add-in card
(1) Installation Guide

Required (Sold Separately):

SAS / SATA Data cables - See section 5.1.1

See the Intel® Server System R1000WT Technical Product Specification for additional information.

49
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.1.1 1U 8x2.5” – Intel® Accessory Kit A1U44X25NVMEDK Cable Guide

PCIe* PCIe*
Port Port
PCIe* PCIe*
0/1 0/1
Port Port
2/3 2/3

SAS Ports PCIe* PCIe* SFF SAS PCIe* SFF PCIe* SATA PCIe* SFF PCIe* SFF SATA PCIe* SFF PCIe* SFF
0-3 SFF Device 0 Ports 4-7 Device 2 SFF Ports Device 1 Device 0 Ports Device 2 Device 3
Device 1 Device 3 0-3 4-7

Figure 11. 1U Combo Backplane (iPC – A1U44X25NVMEDK) Cable Routing

50
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Table 12. 1U 8x2.5" Combo Backplane SAS/SATA Cable Guide
Cables for On-board Cables for Mezzanine Cables for Mezzanine Cables for 12 Gb SAS Cables for 6 Gb SAS
System Configuration Drive Support Multi-port SATA 12 Gb SAS ROC 6 Gb SAS RAID RAID PCIe* add-in card RAID PCIe* add-in card
Ports to Backplane Module to Backplane module to Backplane to Backplane to Backplane
730 mm HR --- HD 650 mm HD --- HD 650 mm HD --- MS From Riser #1 From Riser #1
Connect cable to: Connect cable to: Connect cable to:
SATA -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 730 mm HD --- HD 730 mm HD --- MS
A1U44X25NVMEDK Connect cable to: Connect cable to:
Accessory kit and / or and/or and/or SAS PCIe -> BP 0-3 SAS PCIe -> BP 0-3
Option
800 mm HR --- HD 800 mm HD --- HD 800 mm HD --- MS and/or and/or
8 x 2.5” Combo Connect cable to: Connect cable to: Connect cable to:
R1208WTxxx SAS / SATA + PCIe* sSATA -> BP 4-7 SAS Mezz -> BP 4-7 SAS Mezz -> BP 4-7 875 mm HD --- HD 875 mm HD --- MS
R1208WTTGSR SSD SFF (NVMe) Connect cable to: Connect cable to:
12 Gb SAS capable Cables Included with Cable Kits Required: Cable Kits Required: SAS PCIe -> BP 4-7 SAS PCIe -> BP 4-7
R1208WT2GSR
system SKUs. AXXCBL650HDHD AXXCBL650HDMS
and / or and / or Cable Kits Required: Cable Kits Required:
with PCIe* cables Cable kit required for AXXCBL800HDHD AXXCBL800HDMS AXXCBL730HDHD AXXCBL730HDMS
included in building block and / or and / or
A1U44X25NVMEDK accessory kit. For integration: Use PCIe* cables Use PCIe* cables AXXCBL875HDHD AXXCBL875HDMS
SAS/SATA support AXXCBL1UHRHD included with Combo included with Combo
see the following backplane kit for PCIe* backplane kit for PCIe* Use PCIe* cables Use PCIe* cables
options Use PCIe* cables SSD / NVMe drive SSD / NVMe drive included with Combo included with Combo
included with Combo support support backplane kit for PCIe* backplane kit for PCIe*
backplane kit for PCIe* SSD / NVMe drive SSD / NVMe drive
SSD / NVMe drive support support
support

51
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.2 2U 8x2.5” Combo PCIe* SFF (NVMe) SSD / SAS Backplane – Intel® Accessory Kit
A2U44X25NVMEDK
• The 8x2.5” combo backplane kit is capable of supporting a combination of both SAS devices and up to four PCIe* SFF (Small Form Factor) (NVMe)
SSD drives
• All eight drive connectors are capable of supporting a SAS device, but only four include SFF8639 connectors that can support PCIe* SFF (NVMe)
SSDs
• The PCIe* x16 interface add-in card MUST be installed in a x16 riser card (included), and is only supported in the Riser #2 slot of the server board.
• This kit is only supported in dual processor configurations
• The 2U system is limited to supporting only one combo backplane kit in addition to one or two other backplane options
• The combo backplane module can only be supported in the first (left) drive bay when no other backplane module is installed
• Due to thermal and power limits associated with 16 x 2.5” and 24 x 2.5” front drive configurations, the combo backplane module can only be
supported in the second (middle) drive bay

Intel Product Code Order Information Product Description Product Type

2U 8x2.5” Combo PCIe* SFF (NVMe) SSD / SAS Backplane Kit
Kit Includes:
(1) 8x2.5” Drive Bay Assembly with backplane
iPC – A2U44X25NVMEDK (4) SAS / SATA Hot Swap Drive Carriers (Green Latch)
(4) PCIe* SFF SSD (NVMe) Hot Swap Drive Carriers (Blue Latch)
MM# – 936253
(2) Dual PCIe* Port Cables
UPC – 00735858288880
(1) PCIe x16 Add-in card  2U Accessory Kit
EAN – 5032037068161
(1) 2-slot PCIe Riser card PCBA and mounting screws
MOQ – 1
(1) I2C jumper cable (used in dual backplane configurations)
(1) Installation Guide

Required (Sold Separately):

SAS / SATA Data cables - See sections 5.2.1& 5.2.2

52
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

See the Intel® Server System R2000WT Technical Product Specification for additional information.

SAS Ports PCIe* SFF PCIe* SFF SAS Ports

SATA Ports PCIe* SFF PCIe* SFF SATA Ports
0-3 Device Device 4-7
0-3 Device Device 4-7
0/1 2/3
0/1 2/3

Figure 12. 2U Combo Backplane (iPC – A2U44X25NVMEDK) Cable Routing

53
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.2.1 2U 8x2.5” – Intel® Accessory Kit A2U44X25NVMEDK SAS/SATA Cable Guide

Figure 13. Combo Backplane Module Placement – 8 x 2.5” front drive configurations
Cables for On-board Cables for Mezzanine Cables for Mezzanine Cables for 12 Gb SAS Cables for 6 Gb SAS
System Drive Bay #1
Multi-port SATA Ports 12 Gb SAS ROC 6 Gb SAS RAID RAID PCIe* add-in card RAID PCIe* add-in card
Configuration
to Backplane Module to Backplane module to Backplane to Backplane to Backplane
730 mm HD --- HD 730 mm HD --- HD 730 mm HD --- MS From Riser #1 From Riser #1
Connect cable to: Connect cable to: Connect cable to:
SATA -> BP 0-3 SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 730 mm HD --- HD 730 mm HD --- MS
Included w/system Included w/system Connect cable to: Connect cable to:
SKUs SKUs and/or SAS PCIe -> BP 0-3 SAS PCIe -> BP 0-3
and / or and/or
8 x 2.5” Combo 730 mm HD --- MS and/or and/or
R2208WT… SAS / SATA + PCIe* 730 mm HD --- HD 730 mm HD --- HD Connect cable to:
SSD SFF (NVMe) Connect cable to: Connect cable to: SAS Mezz -> BP 4-7 730 mm HD --- HD 730 mm HD --- MS
iPC sSATA -> BP 4-7 SAS Mezz -> BP 4-7 Connect cable to: Connect cable to:
A2U44X25NVMEDK Included w/system Included w/system Cable Kits Required: SAS PCIe -> BP 4-7 SAS PCIe -> BP 4-7
SKUs SKUs (1 or 2)
PCIe* cables included AXXCBL730HDMS Cable Kits Required: Cable Kits Required:
in accessory kit. For Cable kit required for Cable kit required for (1 or 2) (1 or 2)
Drive Bay #1 SAS/SATA support building block building block Use PCIe* cables AXXCBL730HDHD AXXCBL730HDMS
populated see the following integration: integration: included with Combo
options (2) AXXCBL730HDHD (2) AXXCBL730HDHD backplane kit for PCIe* Use PCIe* cables included Use PCIe* cables
SSD SFF / NVMe drive with Combo backplane kit included with Combo
Use PCIe* cables Use PCIe* cables support for PCIe* SSD SFF / NVMe backplane kit for PCIe*
included with Combo included with Combo drive support SSD SFF / NVMe drive
backplane kit for PCIe* backplane kit for PCIe* support
SSD SFF / NVMe drive SSD SFF / NVMe drive
support support

54
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.2.2 2U 16x2.5” / 24x2.5” –– Intel® Accessory Kit A2U44X25NVMEDK SAS / SATA Cable Guide

Figure 14. Combo Backplane Module Placement - 16 x 2.5” and 24 x 2.5” front drive configurations

Cables for Mezzanine Cables for Mezzanine 6 Cables for 12 Gb SAS Cables for 6 Gb SAS
System Cables for Drive Drive Bay #2 Backplane
12 Gb SAS ROC Module Gb SAS RAID module to RAID PCIe* add-in card RAID PCIe* add-in card
Configuration Bay #1 Type
to Drive Bay #2 Drive Bay #2 to Drive Bay #2 to Drive Bay #2
730mm HD --- HD 730mm HD --- MS From Riser #1 From Riser #1
See section 5.2.1 Connect cable to: Connect cable to:
SAS Mezz -> BP 0-3 SAS Mezz -> BP 0-3 730 mm HD --- HD 730 mm HD --- MS
Connect cable to: Connect cable to:
and/or and/or SAS PCIe -> BP 0-3 SAS PCIe -> BP 0-3
8 x 2.5” Combo
SAS / SATA + PCIe* SSD 800mm HD --- HD 800mm HD --- MS and/or and/or
SFF (NVMe) Connect cable to: Connect cable to:
iPC SAS Mezz -> BP 4-7 SAS Mezz -> BP 4-7 800 mm HD --- HD 800 mm HD --- MS
R2216WT… A2U44X25NVMEDK Connect cable to: Connect cable to:
One or both cable kits for One or both cable kits SAS PCIe -> BP 4-7 SAS PCIe -> BP 4-7
R2224WT…
PCIe* cables included in building block for building block
accessory kit. integration: integration: One or both cable kits One or both cable kits for
(1) AXXCBL730HDHD (1) AXXCBL730HDMS for building block building block
For SAS/SATA support
(1) AXXCBL800HDHD (1) AXXCBL800HDMS integration: integration:
see the following
(1) AXXCBL730HDHD (1) AXXCBL730HDMS
options
Use PCIe* cables Use PCIe* cables (1) AXXCBL800HDHD (1) AXXCBL800HDMS
included with Combo included with Combo
backplane kit for PCIe* backplane kit for PCIe* Use PCIe* cables Use PCIe* cables
SSD / NVMe drive SSD / NVMe drive included with Combo included with Combo
support support backplane kit for PCIe* backplane kit for PCIe*
SSD SFF / NVMe drive SSD SFF / NVMe drive
support support

55
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.3 2U 8x2.5” Combo PCIe x8 SFF (NVMe) SSD / SAS Backplane – Intel® Accessory Kit
A2U44X25NVMEDK2
• This 8x2.5” combo backplane kit is capable of supporting a combination of both SAS devices and up to four PCIe* SFF (Small Form Factor) (NVMe)
SSD drives and eight PCIe* SFF (Small Form Factor) (NVMe) SSD drives possible with the of A2U44X25NVMEDK2 kits.
• All eight drive connectors are capable of supporting a SAS device, but only four include SFF8639 connectors that can support PCIe* SFF (NVMe)
SSDs
• The Intel® PCI Express 8-Lane add in card included in this kit has 4-Port Fan-Out Switch which is compatible with standard PCIe SIG x8 or x16 PCIe
slots
• The Kit comes with both full height and low profile mounting brackets
• To support 8 NVMe drives there would be 4 NVMe in the first bay and 4 NVMe in the 2nd bay
• This kit is only supported in dual processor configurations
• The combo backplane module can be supported in the first (left) drive bay when no other backplane module is installed

Intel Product Code Order Information Product Description Product Type

2U 8x2.5” Combo PCIe x8 SFF (NVMe) SSD / SAS Backplane

iPC – A2U44X25NVMEDK2 Kit Includes:

(1) 8x2.5” Drive Bay Assembly with backplane
(4) SAS / SATA Hot Swap Drive Carriers (Green Latch)
MM# – 947924
(4) PCIe* SFF SSD (NVMe) Hot Swap Drive Carriers (Blue Latch)
UPC – 00735858315555
(2) Dualiport PCIe* SFF (NVMe) Device Cables  2U Accessory Kit
EAN – 5032037086554
(1) PCIe x8, 4-Port switch Add-In Card
MOQ – 1
(1) I2C jumper cable (used backplane to backplane)
(1) Installation Guide

Required (Sold Separately):

SAS / SATA Data cables - See sections 5.2.1& 5.2.2

56
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Note: Cable connections identified in the following cable routing diagrams can be applied to any combo backplane assembly installed. However, cable
routing may differ depending on which riser card the x8 PCIe* Retimer card is installed.

Combo Backplane Cable Routing – PCIe* SFF (NVMe) + SAS Combo Backplane Cable Routing - PCIe* SFF (NVMe) + SATA

57
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.3.1 2U Chassis Drive Bay Identification

5.3.1.1 Accessory Kit Integration and Usage Requirements

The 2U system is limited to supporting up to two combo backplane assemblies in addition to one or two other backplane options.
• The combo backplane assembly can only be supported in the first (left) drive bay when no other backplane module is installed.

Combo Backplane Module Placement – 8 x 2.5” front drive configurations

• In 16 drive configurations, the combo backplane assemblies are supported in the first two drive bays of the 2U chassis.

Combo Backplane Module Placement - 16 x 2.5” front drive configurations

• In a 24 drive configuration, the combo backplane assemblies are only supported in the first two drive bays of the chassis.

58
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Combo Backplane Module Placement - 24 x 2.5” front drive configurations

• The front side of the backplane includes eight hot swap drive interface connectors. All eight connectors can support SAS (or SATA) drives, but only
the first four are capable of supporting PCIe* SFF (NVMe) SSDs.
• The x8 PCIe* Switch Add-in Card can be supported in the following PCIe Riser Card locations:
• PCIe Riser Card #1 – Top and Bottom PCIe add-in card slots only
• PCIe Riser Card #2 – Any available PCIe add-in card slot
• PCIe Riser Card #3** (If installed) – Not supported

Note: With the exception of the top PCIe add-in slot on Riser #1, all PCIe add-in card slots identified above require that the system have 2 processors
installed

5.4 2U Rear Mount Hot Swap Drive Bay Accessory Kit – iPC A2UREARHSDK
The 2U product family provides the option to support two 2.5” 6 Gb/sec hot swap SSDs installed to a modular drive bay mounted in the back of the
system.

59
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Two 2.5” SATA Hot

Swap Drive Bay
Option

Intel Product Code Order Information Product Description Product Type

2U Rear Mount Hot Swap Drive Bay Accessory Kit

iPC – A2UREARHSDK
Kit Includes:
MM – 934976 (1) Drive Bay Assembly and mounting hardware
 2U Accessory Kit
UPC – 735858283298 (2) 2.5” Hot Swap Drive Carriers
System and Building
EAN – 5032037064354 (2) SATA Data Cables
Block
MOQ – 1 (1) Power Cable
(1) I2C Cable
(1) SGPIO cable
2U Fixed Mount SSD + Rear Drive Bay Cable Kit
iPC - A2UCBLSSD This kit includes cables to provide simultaneous support for up to two
internal fixed mount SATA SSDs + rear drive bay
MM# – 937328
Kit includes:  2U Cable kit
UPC – 735858287005
(1) Power Cable – Connectors to support rear drive bay and 2 internal accessory
EAN – 5032037066747 mount SSDs (No CD/DVD Drive support)
MOQ - 1 (1) Fan out multiport SATA Data cable – Cable connectors include (1)
HD mini-SAS SFF8643 + (4) 7-pin SATA + (1) SGPIO

60
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.5 2U 8x3.5” Front Mount Hot Swap Backplane Assembly - iPC A2U8X35S3HSDK
8x3.5” SAS/SATA Front Mount Hot-Swap Drive Bay Module option for 2U Building Block Chassis iPC – R2000WTxxx.

Intel Product Code Order Information Product Description Product Type

2U 8x3.5” Front Mount Hot Swap Backplane Assembly

iPC – A2U8X35S3HSDK
Kit Includes:
(1) Drive Bay Assembly Module
MM# – 936191 (1) 8x3.5” hot swap backplane
UPC – 00735858288781 (8) 3.5” drive carriers + drive blanks
(1) 175mm I2C Cable • 2U Building Block Accessory Kit
EAN – 5032037068062
(1) 500mm ODD/SSD Power Cable
MOQ – 5 (1) Chassis mounting clip
(1 set) mounting hardware

Required (Sold Separately):

SAS / SATA Data Cables. See section 4.2.3

See the Intel® Server System R2000WT product family System Integration and Service Guide for complete kit installation instructions.

61
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.6 2U 8x2.5” Drive Bay Module Options

2U system configurations that include support for 2.5” front mount storage devices can support up to three 8x2.5” drive bay modules. Intel makes
available different types of 8x2.5” drive bay modules and can support from 1 to 3 of the same module or a mix of different modules. Only the PCIe*
SSD (NVMe) compatible module (iPC – A2U44X25NVMEDK) has the limitation of only supporting one of these modules in combination with other
backplane modules in the system.

Figure 15. R2208WT and R2216WT based system with Front I/O Module Bay Assembly

Figure 16. 2U 2.5" Drive Bay Numbering

Drive numbering in the illustrations above is for general reference only. Actual drive numbering will be dependent on SAS / SATA controller configuration
and how they are cabled to the backplane. Each drive bay will include a single backplane. Each backplane will include a multi-port data connector for
each set of four drives. Ex) for an 8 drive configuration, the backplane will include 2 four port data connectors. In the illustration above, drives showing
a common Drive ID label color share a common data connector on the backside of the given backplane.

62
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

R2208WT (8x2.5” – 1 drive bay) and R2216WT (16x2.5” – 2 drive bays) system configurations utilize the same front I/O module bay assembly containing
the System Control Panel and Front I/O Panel (as shown in Figure 9). When upgrading a R2208WT based system to an R2216WT based system, all that
is needed is the removal of the Bay #2 face plate to insert the new drive bay, and adding the required data cables. No other chassis changes or additions
are required.

Available SAS / SATA 8x25” accessory kits include the following.

Intel Product Code Order Information Product Description Product Type

8x2.5” SAS/SATA Front Mount Hot Swap Drive Bay Module for all
iPC – A2U8X25S3HSDK 2U 2.5” systems

Kit Includes:
MM# – 935066 (1) Drive Bay Assembly Module  2U 2.5” Drive
Upgrade Kit
UPC – 00735858288767 (1) 8x2.5” hot swap backplane
 2U Building Block
EAN – 5032037068048 (8) 2.5” drive carriers + drive blanks
Accessory Kit
MOQ – 1 (1) 75mm I2C Backplane-to-Backplane jumper cable
(1 set) mounting hardware

Required (Sold Separately):

SAS / SATA Data Cables. See section 4.2.5
8x2.5” Dual Port SAS Front Mount Hot Swap Drive Bay Module for
all 2U 2.5” systems

iPC – A2U8X25S3DPDK
Kit Includes:
MM# – 935067 (1) Drive Bay Assembly Module
 2U 2.5” Drive
UPC – 00735858288774 (1) 8x2.5” hot swap backplane Upgrade Kit
EAN – 5032037068055 (8) 2.5” drive carriers + drive blanks 2U Building Block
(1) 75mm I2C Backplane-to-Backplane jumper cable Accessory Kit
MOQ – 1
(1 set) mounting hardware

Required (Sold Separately):

SAS / SATA Data Cables. See section 4.2.5

63
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

For a 2U building block configuration consisting of 24x2.5” drives (3 drive bays – See Figure 10) or when upgrading a R2208WT or R2216WT system to
a 24 drive R2224WT system, the 2U storage front panel option of Intel Accessory Kit A2UHANDLKIT must be installed.

Intel Product Code Order Information Product Description Product Type

iPC – A2UHANDLKIT
1U / 2U Rack Handle Kit

This kit includes 3 different rack handles, including:

(1) Set of 2U storage rack handles with control panel and USB
MM# – 936038
support  2U – 24 2.5” Drive
UPC – 00735858288866
(R2312WT & R2224WT) Upgrade Kit
EAN – 5032037068147
 1U / 2U Spares Kit
MOQ – 1
(1) Set of 2U non –storage rack handles
(R2208WT & R2216WT)

(1) Set of 1U rack handles

(R1304WT & R1208WT

See the Intel Server System R2000WT Product Family System Integration and Service Guide for complete system integration and upgrade instructions.

64
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.7 Locking Front Bezel Accessory Kits

The optional front bezel is made of Black molded plastic and uses a snap-on design. When installed, its design allows for maximum airflow to maintain
system cooling requirements. The front bezel includes a keyed locking mechanism which can be used to prevent unauthorized access to installed
storage devices and front I/O ports.

5.7.1 2U Front Bezel Accessory Kit – iPC A2UBEZEL

Intel Product Code Order Information Product Description Product Type

iPC – A2UBEZEL 2U Front Bezel Accesory Kit

MM# – 918086
Kit Includes:
UPC – 735858241137
(1) 2U locking bezel  2U Accessory Kit
EAN – 5032037035880 (1) Front Panel Window Insert
MOQ – 1 (1 Set) Bezel branding inserts – two ID badges, one wave
(1 Set) Keys

The face of the bezel assembly includes snap-in identification badge options and a wave feature option to allow for customization.

65
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.7.2 1U Front Bezel Accessory Kit – iPC A1UBEZEL

Intel Product Code Order Information Product Description Product Type

iPC – A1UBEZEL 1U Front Bezel Accessory Kit

MM# – 917983 Kit Includes:
UPC – 735858241120 (1) 1U locking bezel  1U Accessory Kit
EAN – 5032037035873 (1) Front Panel Window Insert
MOQ – 1 (1 Set) Bezel branding inserts – two ID badges, one wave
(1 Set) Keys

The face of the bezel assembly includes snap-in identification badge options and a wave feature option to allow for customization.

66
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.8 1U / 2U PCIe* Riser Card Accessory/Spare FRU Options

The Intel® Server Board S2600WT provides three riser slots. Riser slots 1 and 2 are capable of supporting different riser card options to meet needs of
specific system configurations. Riser card options for riser slots 1 and 2 are common. Riser slot 3 is only supported in 2U system configurations and
can only support a riser capable of supporting low profile PCIe* add-in cards.

All PCIe* bus lanes to the riser slots are routed from the processors. Riser slot 1 has a total of 24 PCIe* 3.0 bus lanes routed from both processors; 16
lanes from processor #1 and 8 lanes from processor #2. Riser slot 2 has a total of 24 PCIe* 3.0 bus lanes routed from CPU 2. For riser slot 3, all PCIe*
bus lanes are routed from CPU 2; 8 PCIe* bus lanes are PCIe* 3.0 compatible and 4 PCIe* lanes are PCIe* 2.0 compatible. See the product Technical
Product Specification (TPS) for additional information.

Riser slots 1 and 2 are capable of supporting up to 100W maximum power each. Available power to each add-in card slot on a given riser card is defined
by the PCIe* specification. The server board provides two Auxiliary 12V power connectors that when cabled (iPC AXXGPGPUCABLE), can provide
additional power to high power PCIe* add-in cards.

5.8.1 1U Riser Card Options

Intel Product Code Order Information Product Description Product Type

iPC – F1UL16RISER2
1U 1-slot PCIe riser card option
MM# – 934884
UPC – 00735858288682 One PCIe* add-in card slot – PCIe* x16, x16 mechanical • 1U Building Block Accessory Kit
EAN – 5032037067966 Kit includes: • 1U Spare FRU
MOQ – 1 (1) Riser card PCBA

Each riser card assembly has support for a single full height, ½ length PCIe* add-in card. However, riser card #2 may be limited to ½ length, ½ height
add-in cards if either of the two mini-SAS HD connectors on the server board are used.

Note: Add-in cards that exceed the PCI specification for ½ length PCI add-in cards (167.65mm or 6.6in) may interfere with other installed devices on
the server board.

67
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.8.2 2U Riser Card Options

Intel Product Code Order Information Product Description Product Type

2U 3-slot PCIe* riser card option

iPC – A2UL8RISER2 Riser Slots #1 & #2 Riser Card Option

MM# – 934885
UPC – 00735858288675 Slot # Description • 2U Building Block Accessory Kit
Slot-1 (Top) PCIe* x8 elec, x16 mechanical
EAN – 5032037067959 • 2U Spare FRU
Slot-2 (Middle) PCIe* x8 elec, x16 mechanical
MOQ – 1
Slot-3 (Bottom) PCIe* x8 elec, x8 mechanical
Kit includes:
(1) riser card PCBA

Each 3-slot riser card assembly has support for up to two full height full length add-in cards (top and middle slots) and one full height ½ length add-in
card (bottom slot).

Intel Product Code Order Information Product Description Product Type

2U 2-slot PCIe* Riser card option

iPC – A2UL16RISER2 Riser Slots #1 & #2 Riser Card Option

• 2U Building Block Accessory Kit
MM# – 934886 Slot # Description • 2U Spare FRU
UPC – 00735858288668 Slot-1 (Top) PCIe* x16 elec, x16 mechanical
EAN – 5032037067942 Slot-2 (Bottom) PCIe* x8 elec, x8 mechanical
MOQ – 1 * Required Kit for Intel® Xeon Phi™ or high
Kit includes: power PCIe* add-in card support
(1) Riser card PCBA
(1) 12V-AUX Power Cable

Each 2-slot riser card assembly has support for one full height full length add-in card (top slot) and one full height ½ length add-in card (bottom slot).

Note: The A2UL16RISER2 accessory kit includes a 12V Auxiliary Power cable which can be used to provide additional 12V power for high power PCIe*
add-in cards that require it.

Note: The x16 2-slot riser card is included in Intel Accessory Kit A2U44X25NVMEDK. Systems configured with the A2U44X25NVMEDK accessory kit
cannot support dual Intel® Xeon Phi™ coprocessor cards or dual non-Intel GPGPU cards.

68
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

iPC – A2UX8X4RISER 2U 2-slot riser card option

Riser Slot #3 (only) Riser Card Option

Slot # Description
MM# – 934883 Slot-1 PCIe* x4 elec, x8 mechanical (PCIe* 2.0 support
• 2U Building Block Accessory Kit
UPC – 00735858283311 (Top) only)
• 2U Spare FRU
EAN – 5032037064378 Slot-2 PCIe* x8 elec, x8 mechanical
(Bottom)
MOQ – 1

Kit includes:
(1) Riser card PCBA

Riser Slot #3 is provided to support up to two additional PCIe* add-in card slots for 2U server configurations. The available riser card option is designed
to support low profile add-in cards only.

5.9 Intel® I/O Expansion Modules

The Intel® S2600WT product family includes support for a number of optional Intel® I/O modules that install onto proprietary connectors on the server board leaving
all available PCIe* add-in cards slots available for other add-in card options. The onboard high density interface connector has x8 PCIe* 3.0 bus lanes routed to it from
CPU 1.

Figure 17. Intel® I/O Module Installation

69
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code Order Information Product Description Product Type
Intel® I/O Modules AXX1P40FRTIOM & AXX2P40FRTIOM
iPC – AXX1P40FRTIOM Intel® Single and Dual-Port 40G QSFP+ Ethernet I/O Modules based on
XL710-QDA1 and XL710-QDA2 10 Gigabit Ethernet Controllers
MM# – 933742
UPC – 00735858282291 On the dual port module, the 4x10GbE SFP+ break out is supported on
EAN – 5032037063623 Port 0 only
MOQ – 1 Available Optics Accessories:
• Intel® Ethernet QSFP+ SR4 Optics, E40GQSFPSR
• Intel® Ethernet 40G DCO Optics, E40GDCOQSFP

Connector and cables:

• 40GBASE-CR4, QSFP+ Direct Attached Copper Cable • 1U / 2U Accessory
iPC – AXX2P40FRTIOM • Intel® Ethernet QSFP+ SR4 Optics also supported Kit
• Intel® Ethernet 40G DCO Optics, E40GDCOQSFP

MM# – 933743 Cabling type:

UPC – 00735858282314 • 10GBASE-CR4: Copper Direct Attach passive cable (1–7m);

EAN – 5032037063647 • 10GBASE-SR4: MMF (OM3) up to 100m

MOQ – 1 • Intel® Ethernet 40G DCO Optics up to 50m

Kits Include:
(1) I/O module
(1) EMI shield
(1) Port Labeling Sticker (2 Port only model)
(1 set) Mounting screws

Intel® I/O Module AXX10GBNIAIOM

iPC – AXX10GBNIAIOM Dual SFP+ port 10GbE IO module based on Intel® 82599ES 10 Gigabit
MM# – 917905 Ethernet Controller
UPC – 00735858241090
Kit Includes: • 1U / 2U Accessory
EAN – 5032037035842
Kit
MOQ – 1 (1) I/O module
(1) EMI shield
(1) Port Labeling Sticker
(1 set) Mounting screws

70
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code Order Information Product Description Product Type

Intel® I/O Module AXX10GBTWLIOM3

iPC – AXX10GBTWLIOM3 Dual RJ-45 port 10GBASE-T IO module, based on Intel® Ethernet
MM – 941869 Controller X540
UPC – 00735858296656 • 1U / 2U Accessory
EAN – 5032037072472 Kit Includes: Kit
MOQ – 1 (1) I/O module
(1) EMI shield
(1) Port Labeling Sticker
(1 set) Mounting screws

iPC – AXX1FDRIBIOM Intel® I/O Module AXX1FDRIBIOM

MM – 918607 Single port, FDR 56GT/S speed Intel® I/O Expansion Infiniband* module
UPC – 00735858241106
• 1U / 2U Accessory
EAN – 5032037035859 Kit Includes:
Kit
MOQ – 1 (1) I/O module
(1) EMI shield
(1) Port Labeling Sticker
(1 set) Mounting screws

iPC – AXX2FDRIBIOM Intel® I/O Module AXX2FDRIBIOM

Dual port, FDR 56GT/S (per port capable) speed Infiniband* module
MM – 920627
UPC – 00735858245722 Kit Includes: • 1U / 2U Accessory
EAN – 5032037040235 (1) I/O module Kit
MOQ – 1 (1) EMI shield
(1) Port Labeling Sticker
(1 set) Mounting screws

71
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code Order Information Product Description Product Type

Intel® I/O Module AXX4P1GBPWLIOM

5.9.1 iPC – AXX4P1GBPWLIOM
Quad port 1GbE IO Module based on Intel® Ethernet Controller I350
MM – 917911
UPC – 00735858241083 Kit Includes:
• 1U / 2U Accessory
EAN – 5032037035835 (1) I/O module
Kit
MOQ – 1 (1) EMI shield
(1) Port Labeling Sticker
(1 set) Mounting screws

5.10 Intel® SAS RAID Add-in Cards, Modules, and Accessories

Intel® RAID offers a broad portfolio of RAID solutions designed to address the storage-related challenges of the modern day datacenter as well as the
small business. The Intel® S2600WT product family includes support for the latest generation of 12 Gb/s SAS Intel® RAID add-in cards, modules,
expanders, and accessories. Previous generation 6Gb/s Intel RAID cards can also be supported. See the published Tested Hardware and OS List for a
full list of vaIidated Intel RAID cards.

Additional information for Intel RAID products can be found at the following Intel web sites:

https://www.intel.com/content/www/us/en/products/servers/raid/raid-controllers.html?page=2
https://www.intel.com/content/www/us/en/servers/raid/tri-mode-raid-controller-brief.html
https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/tri-mode-raid-controller-brief.pdf

72
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.10.1 Intel® Integrated RAID Module RMS3 Product Family – SAS 3.0 (12 Gb/s)
Each riser card assembly has support for a single full height, ½ length PCIe* add-in card. However, riser card #2 may be limited to ½ length, ½ height
add-in cards if either of the two mini-SAS HD connectors on the server board are used or if a SATADOM storage device is installed into either of the
single port SATA connectors.
Note: Add-in cards that exceed the PCI specification for ½ length PCI add-in cards (167.65mm or 6.6in) may interfere with other installed devices on
the server board.

Intel Product Code Order Information Product Description Product Type

Intel® Integrated RAID Module RMS3CC080

Mezzanine Form Factor HW RAID Module

iPC – RMS3CC080 8 internal SAS / SATA ports

MM# – 932474 Mini-SAS HD SFF8643 connectors
UPC – 00735858276832 LSI* SAS3108 ROC with 1GB DDR3
• 1U / 2U Accessory Kit
RAID Levels 0, 1, 5, 6, 10, 50, 60
EAN – 5032037060448
Embedded 1GB DDR3 Cache Memory
MOQ - 5
Supports Maintenance Free Backup Unit – iPC AXXRMFBU5

SAS Data cables not included . Must be purchased separately

Intel® Integrated RAID Module RMS3CC040
Mezzanine Form Factor HW RAID Module
iPC – RMS3CC040 4 internal SAS / SATA ports
MM# –932473
Mini-SAS HD SFF8643 connectors
UPC – 00735858276849
LSI* SAS3108 ROC with 1GB DDR3
EAN – 5032037060455 • 1U / 2U Accessory Kit
RAID Levels 0, 1, 5, 6, 10, 50, 60
MOQ – 5 Embedded 1GB DDR3 Cache Memory
Supports Maintenance Free Backup Unit – iPC AXXRMFBU5

SAS Data cables not included . Must be purchased separately

73
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

Intel® Integrated RAID Module RMS3HC080

iPC – RMS3HC080 Mezzanine Form Factor Entry-RAID Module
MM – 932469 8 internal SAS / SATA ports
UPC – 00735858276818 Mini-SAS HD SFF8643 connectors
• 1U / 2U Accessory Kit
LSI* SAS3008 SAS IOC with Advanced Management
EAN – 5032037060424
Entry HW RAID levels – JBOD, RAID 0,1,10 & Hybrid 5,50
MOQ – 5
128MB server board memory utilized as cache memory for RAID 5/50

SAS Data cables not included . Must be purchased separately

iPC – RMS3JC080 Intel® Integrated RAID Module RMS3JC080

Mezzanine Form Factor Entry-RAID Module
MM – 932472
8 internal SAS / SATA ports
UPC – 00735858276825 Mini-SAS HD SFF8643 connectors • 1U / 2U Accessory Kit
EAN – 5032037060431 LSI* SAS3008 IOC with Basic Firmware
MOQ – 5 Entry HW RAID levels – JBOD, RAID 0, 1, 1E, 10

SAS Data cables not included . Must be purchased separately

Intel® Integrated RAID Module RMS3VC160

iPC – RMS3VC160 Mezzanine Form Factor Entry-RAID Module

MM – 946902 12Gb/s (SAS 3.0)
UPC – 00735858308595 16 internal port SAS/SATA
• 1U / 2U Accessory Kit
PCIe 3.0 dual core I/O Controller (IOC)
EAN – 5032037081351
Entry HW RAID levels – JBOD Only
MOQ – 5

SAS Data cables not included . Must be purchased separately

74
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

Intel® Integrated RAID Module RMS3VC160

Mezzanine Form Factor Entry-RAID Module
iPC – RMS3AC160 12Gb/s (SAS 3.0)
MM – 947032 16 internal port SAS/SATA
UPC – 00735858308571 PCIe 3.0 dual core I/O Controller (IOC)
• 1U / 2U Accessory Kit
Entry HW RAID levels – 0, 1, 10, 5, 50, 6, 60 and JBOD
EAN – 5032037081337
Compatible with Cache Backup accesory “AXXRMFBU6”
MOQ – 5

SAS Data cables not included . Must be purchased separately

iPC – AXXRMFBU5 Intel® RAID Maintenance Free Backup Unit AXXRFMBU5

A super-capacitor module and flash memory card designed to help
protect data in dynamic memory during a power failure or system crash
MM# – 933907
event.
UPC – 00735858306768
The AXXRMFBU5 kit is used with the 12 Gb/s Intel® Integrated RAID • 1U / 2U Accessory Kit
EAN – 5032037060417 Modules
MOQ – 5
Compatible with:
 Intel® Integrated RAID Module RMS3CC080
 Intel® Integrated RAID Module RMS3CC040
Intel® RAID Maintenance Free Backup Unit AXXRFMBU6
iPC – AXXRMFBU6 A super-capacitor module and flash memory card designed to help
MM# – 945975
protect data in dynamic memory during a power failure or system crash
UPC – 00735858276801
event. • 1U / 2U Accessory Kit
EAN – 5032037080163
The AXXRMFBU6 kit is used with the 12 Gb/s Intel® Integrated RAID
MOQ – 5 Modules

75
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.10.1.1 Intel® RAID Controller Add-in Cards - SAS 3.0 (12Gb/s)

Intel Product Code Order Information Product Description Product Type

Intel® RAID Controller RS3DC080

iPC – RS3DC080
Low Profile, half length, (MD2 Compliant) PCIe* add-in card
8 internal SAS / SATA ports
MM# – 934643
LSI* SAS3108 ROC
• 1U / 2U Accessory Kit
UPC – 00735858265355 RAID Levels – 0, 1, 5, 6, 10, 50, and 60
MOQ – 5 Embedded 1GB DDR3 Cache Memory
Supports Maintenance Free Backup Unit – iPC AXXRMFBU4

SAS Data cables not included . Must be purchased separately

iPC – RS3DC040 Intel® RAID Controller RS3DC040

Low Profile, half length, (MD2 Compliant) PCIe* add-in card
4 internal SAS / SATA ports
MM# – 934644
LSI* SAS3108 ROC
• 1U / 2U Accessory Kit
UPC – 00735858265362 RAID Levels – 0, 1, 5, 6, 10, 50, and 60
MOQ – 5 Embedded 1GB DDR3 Cache Memory
Supports Maintenance Free Backup Unit – iPC AXXRMFBU4

SAS Data cables not included . Must be purchased separately

Intel® RAID Controller RS3SC008

iPC – RS3SC008
Low Profile, half length, (MD2 Compliant) PCIe* add-in card
MM# – 928223 8 external SAS / SATA ports
UPC – 00735858266956 LSI* SAS3108 ROC
• 1U / 2U Accessory Kit
RAID Levels – 0, 1, 5, 6, 10, 50, and 60
EAN – 5032037068567
Embedded 1GB DDR3 Cache Memory
MOQ – 5
Supports Maintenance Free Backup Unit – iPC AXXRMFBU4

SAS Data cables not included . Must be purchased separately

76
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

iPC – RS3MC044 Intel® RAID Controller RS3MC044

Low Profile, half length, (MD2 Compliant) PCIe* add-in card
MM# – 928244 4 internal SAS / SATA ports + 4 external SAS / SATA ports
UPC – 00735858266987 LSI* SAS3108 ROC
• 1U / 2U Accessory Kit
RAID Levels – 0, 1, 5, 6, 10, 50, and 60
EAN – 5032037068574
Embedded 1GB DDR3 Cache Memory
MOQ – 5
Supports Maintenance Free Backup Unit – iPC AXXRMFBU4

SAS Data cables not included . Must be purchased separately

iPC – RS3GC008
Intel® RAID Controller RS3GC008
Low Profile, half length, (MD2 Compliant) PCIe* add-in card
MM# – 928220
Entry Level SAS Card
UPC – 00735858267175 8 external SAS / SATA ports • 1U / 2U Accessory Kit
EAN – 5032037053839 LSI* SAS3008 IOC
MOQ – 5 RAID Levels – JBOD (SAS Connectivity)

SAS Data cables not included. Must be purchased separately

iPC – RS3UC080 Intel® RAID Controller RS3UC080

Low Profile, half length, (MD2 Compliant) PCIe* add-in card
MM# – 928218
Entry Level SAS RAID Card
UPC – 00735858267649 8 internal SAS / SATA ports • 1U / 2U Accessory Kit
EAN – 5032037053938 LSI* SAS3008 IOC
MOQ – 5 RAID Levels – 0, 1, 1E, 10, and JBOD

SAS Data cables not included. Must be purchased separately

77
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

iPC – RS3FC044 Intel® RAID Controller RS3FC044

Low Profile, half length, (MD2 Compliant) PCIe* add-in card
MM# – 928219 Entry Level SAS RAID Card
UPC – 00735858267267 4 internal + 4 external SAS / SATA ports
• 1U / 2U Accessory Kit
LSI* SAS3008 IOC
EAN – 5032037053921
RAID Levels – 0, 1, 1E, 10, and JBOD
MOQ – 5

SAS Data cables not included. Must be purchased separately

Intel® RAID Maintenance Free Backup Unit AXXRFMBU4

A super-capacitor module and flash memory card designed to
help protect data in dynamic memory during a power failure or
iPC – AXXRMFBU4 system crash event.

MM# – 937318
The AXXRMFBU4 kit is used with the 12 Gb/s Intel® RAID
UPC – 00735858273787 Controller PCIe* Add-in Cards • 1U / 2U Accessory Kit
EAN – 5032037058544
MOQ – 5 Compatible with:
 Intel® RAID Controller RS3DC080
 Intel® RAID Controller RS3DC040
 Intel® RAID Controller RS3SC008
 Intel® RAID Controller RS3MC044

78
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.10.2 Intel® RAID Accessory Options

Intel Product Code Order Information Product Description Product Type

iPC – AXXRPFKSSD2
MM# – 919499
Intel® RAID SSD Cache with Fast Path I/O
UPC – 00735858221467
EAN - 5032037051699 • 1U / 2U Accessory Kit
Upgrade Key to enable SSD Cache with Fastpath I/O for Intel®’s RAID
MOQ – 5
RS25 and RS3 (based on LSI 3108) families of ROC products.

iPC – AXXRPFKDE2
MM# – 915317 Intel® RAID Drive Encryption Management
UPC – 00735858221474
• 1U / 2U Accessory Kit
EAN - 5032037051705 Upgrade Key to enable Drive Encryption Management for Intel®’s RAID
MOQ – 5 RS25 and RS3 (based on LSI 3108) families of ROC products.

iPC – AXXRPFKSNSH2
MM# – 915318 Intel® RAID Rapid RecoverySnapshot
UPC – 00735858221481
• 1U / 2U Accessory Kit
EAN - 5032037051712 Upgrade Key to enable Rapid Recovery Snapshot for Intel®’s RAID RS25
MOQ – 5 and RS3 (based on LSI 3108) families of ROC products.

ESRT2 SATA SW RAID activation key

iPC – RKSATA4R5 MM# – 916346
UPC – 00735858238861 Used to enable onboard SATA controllers to support embedded ESRT2
• 1U / 2U Accessory Kit
EAN – 5032037033640 SW RAID 5
MOQ - 5

79
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

Intel® RAID Maintenance Free Backup Unit AXXRFMBU5
iPC – AXXRMFBU5 A super-capacitor module and flash memory card designed to help
protect data in dynamic memory during a power failure or system crash
event.
MM# – 933907
UPC – 00735858276801
The AXXRMFBU5 kit is used with the 12 Gb/s Intel® Integrated RAID • 1U / 2U Accessory Kit
EAN – 5032037060417 Modules
MOQ – 5
Compatible with:
 Intel® Integrated RAID Module RMS3CC080
 Intel® Integrated RAID Module RMS3CC040
Intel® RAID Maintenance Free Backup Unit AXXRFMBU4
iPC – AXXRMFBU4 A super-capacitor module and flash memory card designed to help
protect data in dynamic memory during a power failure or system crash
event.
MM# – 937318
The AXXRMFBU4 kit is used with the 12 Gb/s Intel® RAID Controller
UPC – 00735858273787 PCIe* Add-in Cards
• 1U / 2U Accessory Kit
EAN – 5032037058544 Compatible with:
MOQ – 5  Intel® RAID Controller RS3DC080
 Intel® RAID Controller RS3DC040
 Intel® RAID Controller RS3SC008
Intel® RAID Controller RS3MC044

iPC - AWTAUXBBUBKT 1U / 2U RMFBU Mounting Option Kit

Kit includes:

(1) – 2U RMFBU Mounting plate. The mounting plate installs in one of

MM# – 937082 two possible mounting locations in front of either riser slot on the 2U air
duct and can support up to two AXXRMFBU5 or AXXRSBBU9 units. Full
UPC – 00735858289344
length PCIe cards cannot be supported when this mounting plate is • 1U / 2U Accessory Kit
EAN – 5032037068321 installed behind the given riser slot.
MOQ – 1
(1) – RMFBU plastic housing bracket to support two stacked
AXXRMFBU5 units in a 1U chassis

80
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.11 Intel® PCI Express NVMe Add-in Cards

Intel® offers the PCIe NVMe Add-in cars as solutions designed to address the storage-Performance related challenges of the modern day datacenter as well as the
small business. The Intel® S2600WT product family includes support for the latest generation PCI Express* Gen3 SSDs (NVMEs).

Intel Product Code Order Information Product Description Product Type

Intel® PCI Express 8-Lane, 4-Port Fan-Out Switch

iPC – AXX4PX8HDAIC The Intel® PCI Express 8-Lane, 4-Port Fan-Out Switch is ideal for
increasing the number of NVMe SSDs in systems where PCIe lanes from
the CPU are limited.

MM# – 947923 • Compatible with standard PCIe * SIG x8 or x16 PCIe slots.
UPC – 00735858315548 • Comes with full height and low profile mounting brackets. • 2U Accessory Kit
EAN – 5032037086547 • Mini-SAS HD cables included for cabling to NVMe drives /
MOQ – 1 backplanes

Max Data Rate:

Integrated SerDes supports 8.0 GT/s Gen3; 5.0 GT/s Gen2 and 2.5 GT/s
Gen1 operation

1U PCIe* Switch Riser 3 Card Kit supporting 2x PCIe* SSD drives

iPC – A1U2PXR3HDAIC MM# – 947925

Kit Includes:
UPC – 00735858315531
(1) 1U PCIe* Switch Riser • 1U Accessory Kit
EAN – 5032037086530
(2) PCIe* SSD Drives
MOQ – 1
(1) Mini-SAS HD cables Included for cabling to NVMe drives

81
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.12 Intel Power Supply Modules and Power Cords

Intel Product Code Order Information Product Description Product Type

iPC – AXX1100PCRPS
MM# – 936183
UPC – 00735858287920 1100W AC CRPS 80+ Platinum efficiency power supply module • 2U Building Block Option
EAN – 5032037067478 • 2U Accessory Kit
MOQ - 1 Power cord sold separately • 2U Spare FRU

iPC – FXX750PCRPS
MM# – 915604
750W AC CRPS 80+ Platinum efficiency power supply module • 1U / 2U Building Block Option
UPC – 00735858234979
• 1U / 2U Accessory Kit
EAN – 5032037030601
Power cord sold separately • 1U / 2U Spare FRU
MOQ - 1

iPC – AXX750DCCRPS
750W -48v DC (Direct current) CRPS 80+ Gold efficiency power supply
module
MM# – 927253
• 1U / 2U Building Block Option
UPC –00735858260862 Kit Includes:
• 1U / 2U Accessory Kit
EAN –5032037051354 (1) power supply
• 1U / 2U Spare FRU
MOQ - 1 (1) O-ring terminal adapter.
Power cable sold separately

iPC – AXXDCCRPSCBL
MM – 922062
UPC – 00735858247993 4000mm (13ft) DC power cable. Connects directly to power supply • 1U / 2U Accessory Kit
EAN – 5032037042871 instead of O-ring terminals adapter • 1U /2U Spare FRU
MOQ – 1

iPC – FPWRCABLENA
MM# – 879287
UPC – 00735858181129 • 1U / 2U Accessory Kit
1500mm (59in) North American Power Cord
EAN – 5032037015738 • 1U / 2U Spare FRU
MOQ – 1

82
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.13 1U / 2U Rack Mount Kits

Caution: Exceeding the rail kit’s specified maximum weight limit or misalignment of the server in the rack may result in failure of the rack rails, resulting
in damage to the system or personal injury. Using two people or the use of a mechanical assist tool to install and align the server into the rack is highly
recommended.

Intel Product Code Order Information Product Description Product Type

1U / 2U Premium Rail Kit
5.13.1 iPC - AXXPRAIL • 1U and 2U compatible
• Adjustment within 609.6mm~762mm to fit difference depth rack
MM# – 924417
• 800mm maximum travel length
UPC – 00735858219686
• Full extension from rack  1U / 2U Accessory Kit
EAN – 5032037014823
• 54 lbs (24 kgs) max support weight
MOQ – 1
• Tool-less installation
• Drop in system install
• For Cable Management arm support – order iPC AXX1U2UCMA

1U / 2U Enhanced Value Rail Kit

• Works for all 438mm wide Intel® Rack Chassis 1U, 2U, 4U
5.13.2 iPC – AXXELVRAIL
• Adjustment within 609.6mm~765mm to fit difference depth rack
MM# – 920970 • 424.2mm maximum travel length
UPC – 00735858244367 • 2/3 extension from rack
 1U / 2U Accessory Kit
EAN – 5032037038980 • 130 lbs (59 kgs) max support weight
MOQ - 1 • Tool-less chassis attach
• Tools required to attach to rails to rack

Note: No Cable Management Arm support.

5.13.3 iPC – AXX1U2UCMA

1U / 2U Cable Management Arm (CMA)
MM# – 913117
UPC – 00735858224604
• 1U / 2U compatible  1U / 2U Accessory Kit
EAN – 5032037019972
• Support for Premium 1U/2U AXXPRAIL and 1U A1UFULLRAIL rail kit
MOQ – 1
options only

83
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code Order Information Product Description Product Type

iPC - AXX2POSTBRCKT 1U / 2U 2-Post fixed mount bracket kit

MM# – 918808
• 1U and 2U compatible
UPC – 00735858245319
• Tools required to attach components to rack  1U / 2U Accessory Kit
EAN – 5032037039833
Note: Not compatible with 24x2.5” drive or 12x3.5” drive system
MOQ – 1
configurations

1U Premium quality rails with no CMA support

• Travel distance 780mm
iPC – A1USHRTRAIL MM# – 939208
• Bracket adjustment from 609.6mm to 762mm
UPC –00735858289931
• Supports up to 18Kg  1U Accessory Kit
EAN –5032037068772
• Tool-less installation
MOQ – 1
• Full extension from rack
Kit includes: Rails, screws, installation manual
1U Premium quality rails with CMA support.
• Travel distance 780mm

iPC – A1UFULLRAIL MM# –939207 • Bracket adjustment from 609.6mm to 762mm

UPC –00735858291972 • Tool-less installation
 1U Accessory Kit
EAN –5032037070539 • Full extension from rack
MOQ – 1 • Supports up to 18Kg
• Kit includes: Rails, screws, installation manual
For Cable Management arm support – order iPC AXX1U2UCMA
2U+ Premium quality rails with no CMA support.
• Travel distance 788mm
MM# – 939210
• Bracket adjustment from 594.8mm to 813mm
UPC – 00735858291996
iPC - AXXSHRTRAIL • Tool-less installation  2U Accessory Kit
EAN – 5032037070553
• Supports up to 45Kg
MOQ – 1
• Full extension from rack
• Kit includes: Rails, screws, installation manual

84
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
Intel Product Code Order Information Product Description Product Type
2U+ Premium quality rails with CMA support.
• Travel distance 800mm
MM# –939209 • Bracket adjustment from 594.8mm to 813mm
iPC – AXXFULLRAIL UPC –00735858291989 • Tool-less installation
 2U Accessory Kit
EAN –5032037070546 • Supports up to 45Kg
MOQ – 1 • Full extension from rack
• Kit includes: Rails, screws, installation manual
• For Cable Management arm – order iPC AXXCMA2
MM# – 939211 Cable management arm
iPC – AXXCMA2 UPC –00735858292009
Compatible with AXXFULLRAIL only  2U Accessory Kit
EAN –5032037070560
MOQ – 1

5.13.4 Intel® Xeon Phi™ Coprocessor Card and Non-Intel GPGPU Support
Intel® Xeon Phi™ Coprocessor cards and non-Intel GPGPU cards are supported in the following 2U system configurations only: R2208WT, R2308WT,
and R2216WT.
Because of mechanical and thermal limits, the 1U product family and the R2312WT… and R2224WT… system configurations do NOT have support for
Intel® Xeon Phi™ coprocessor cards or non-Intel GPGPU cards.

Figure 18. Intel® Xeon Phi ™ Coprocessor Cards With Active and Passive Cooling
• Supported 2U systems configured with the standard (default) air duct, can only support high power add-in cards (>75W) with active (with fan) heat
sinks.

85
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List
• In supported 2U system, high power add-in cards (>75W) with passive (no fan) heat sinks can only be supported in systems configured with a high
air flow air duct available in Intel Accessory Kit – iPC AWTCOPRODUCT.

Note: Intel® Server System R2208WTTYC1R is a special system SKU that includes the necessary components to support passive high power
(>75W) add-in cards like the Intel® Xeon Phi™ coprocessor card, Intel® Visual Compute Accelerator or non-Intel GPGPU cards.

See the Intel® Server System R2000WT product family Technical Product Specification for more information.

Non-Intel GPGPU Support Disclaimer:

Intel incorporates necessary features and conducts appropriate thermal testing of its server systems to ensure the thermal requirements of Intel® Xeon
Phi™ coprocessor cards can be supported when the documented support criteria are met.
Intel can make support recommendations for non-Intel GPGPU cards listed on its Tested Hardware and Support List, based on the same support criteria.
However, Intel cannot guarantee its server systems can meet the thermal requirements of these non-Intel high power add-in cards. System integrators
should verify non-Intel GPGPU add-in card air flow and thermal requirements from vendor specifications before integrating them into the system. It is
the responsibility of the system integrator to conduct appropriate system testing on server systems configured with a non-Intel GPGPU card to ensure
reliable operation.
For non-Intel GPGPU cards listed on Intel’s tested hardware and OS list, Intel will provide best internal support efforts to duplicate and understand
reported issues. However, Intel cannot guarantee an issue will be root caused nor that a fix can be made available to correct it.

86
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

2U High Air flow Air Duct Kit

Required 2U accessory kit when installing an Intel® Xeon Phi™ coprocessor
card with passive heat sink (heat sink only, no fan)
iPC – AWTCOPRODUCT
Kit Includes:
MM# – 934988 (1) High air flow air duct
UPC – 00735858283328 (1) Metal shipping bracket
EAN – 5032037064385 (2) Non-intel GPGPU secure mounting adapters  2U Accessory Kit
MOQ – 1 Note: Intel Xeon Phi cards with active heat sinks are NOT supported in
systems confgured with the high air flow air duct.

Note: Systems configured with any type of Intel® Xeon Phi™ card and/or non-
Intel GPGPU card must have the shipping bracket installed before the
system is exposed to any level of shock or vibration or is shipped to the end
user location. Failure to install the shipping bracket has the potential to
cause serious damage to various components within the system.

 Each Intel® Xeon Phi™ coprocessor card and non-Intel GPGPU card must be installed into the top x16 slot of a 2-Slot PCIe* Riser card. With a 2-slot
riser card installed, the embedded fan speed control will operate system fans at a higher speed. 3-slot riser cards (as shipped in the standard
platform configuration) cannot be used due to air flow and thermal limitations.

Intel Product Code Order Information Product Description Product Type

2U 2-slot riser card

iPC – A2UL16RISER2 Required 2U accessory kit when installing an Intel® Xeon Phi™
coprocessor or other Non-Intel GPGPU card
MM# – 934886
Slot # Description • 2U Building Block Accessory
UPC – 00735858288668
Slot-1 (Top) PCIe* x16 elec, x16 mechanical Kit
EAN – 5032037067942
Slot-2 (Bottom) PCIe* x8 elec, x8 mechanical • 2U Spare FRU
MOQ – 1
Kit includes:
(1) Riser card PCBA
(1) 12V-AUX Power Cable

87
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

5.14 Intel® I/O Expansion Add-in Cards

Intel Product Code Order Information Product Description Product Type

2U 2-slot riser card

iPC – 100HFA016LS
Intel® Omni-Path Host Fabric Interface Adapter 100 Series 1
MM# – 948159
UPC – 00735858313445
• Designed specifically for HPC • 1U / 2U Accessory Kit
EAN – 5032037084970
• Single port
MOQ – 1
• Link speed 100Gb/s
• Port PCIe x16 Low Profile and Std Height Brackets

88
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

6 1U / 2U Miscellaneous Accessory Options

Intel Product Code Order Information Product Description Product Type

Intel® Local Control Panel
A 1U / 2U front panel module which supports the following features:
 2 line LCD screen
 Customized messaging
MM# – 921028
iPC – A1U2ULCP  Able to display critical system errors
UPC – 00735858245302
When installed this module replaces the front I/O port module on
EAN – 5032037039826 R1304, R1208, R2308, R2208, and R2216 based systems. The LCP  1U / 2U Accessory Kit
MOQ – 1 module re-uses the existing front USB port assembly from these
systems. It does NOT support a front video connector.

This Kit is NOT compatible with R2224 and R2312 based systems.

See the Intel® Local Control Panel Technical Product Specification for
more information

Slimline SATA DVDROM Drive

iPC – AXXSATADVDROM Includes 880mm SATA cable
MM# – 937569
UPC – 00735858197663 A peripheral power cable is included with the systems that have
support for optical drives  1U / 2U Accessory Kit
EAN – 5032037015127
MOQ – 1
Optical drives are not supported in R2312WT & R2224WT based
systems

Slimline SATA DVD+/-RW ROM Drive

iPC – AXXSATADVDRWROM Includes 880mm SATA cable
MM# – 937575
UPC – 00735858197670 A peripheral power cable is included with the systems that have
support for optical drives  1U / 2U Accessory Kit
EAN – 5032037015134
MOQ - 1
Optical drives are not supported in R2312WT & R2224WT based
systems

89
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

1U fixed mount SSD mounting Kit

Tray is installed in the optical drive bay of 1U systems.

MM# – 935065
iPC - AXXSSDODDKIT Kit includes:
UPC – 00735858288750
(1) – Metal SSD mounting tray accomodates one 2.5” SATA SSD
EAN – 5032037068031  1U Accessory Kit
(1) – 800mm SATA data cable
MOQ – 1
(1) – SSD peripheral power cable

Note: Maximum SSD thickness supported = 7mm

Note: Systems configured with this kit cannot support an additional
optical drive
Serial Port Cable Kit

iPC - AXXRJ45DB93 This kit provides serial port cables for use with systems that include a
back panel cut out to support a DB9 Serial ‘B’ port as routed from the
server board and for systems that include an external RJ45 Serial ‘A’
MM# – 920430 port that need to convert the connector to a DB9 style connector.
UPC – 00735858242820
 1U / 2U Accessory Kit
EAN – 5032037037525 Kit includes:
MOQ – 1 (1) - 1040mm Internal Serial ‘B’ port cable – Onboard DH10 header-
to- External Mount DB9 – for 2U systems
(1) - 520mm Internal Serial ‘B’ port cable – Onboard DH10 header-
to- External mount DB9 – for 2U systems
(1) – 100mm DCD RJ45 to DB9 Dongle
(1) – 100mm DSR RJ45 to DB9 Dongle

iPC - AXXRMM4LITE Intel® Remote Management Module 4 Lite Activation key

MM# – 911660 Installation of this activation key on to the server board enables
UPC – 00735858219297 support for the following advanced server management features:
 1U / 2U Accessory Kit
EAN – 5032037014946  Integrated KVM
MOQ – 1  Media Redirection
See the Intel Remote Management Module 4 and Integrated Web
Console Users Guide for more information.

90
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

Intel® Remote Management Module 4 Lite version 2 – RoHS free
iPC - AXXRMM4LITE2
MM# – 946514 Installation of this activation key on to the server board enables
support for the following advanced server management features:
UPC – 00735858307413
 Integrated KVM  1U / 2U Accessory Kit
EAN – 5032037080750
 Media Redirection
MOQ – 10
 RoHS free
See the Intel Remote Management Module 4 and Integrated Web
Console Users Guide for more information.
Intel® Trusted Platform Module (TPM)

iPC - AXXTPME5
A TPM is a hardware-based security device that addresses the
growing concern on boot process integrity and offers better data
MM# – 919737 protection. TPM protects the system start-up process by ensuring it is
UPC – 00735858240352 tamper-free before releasing system control to the operating system.
 1U / 2U Accessory Kit
EAN – 5032037035088 A TPM device provides secured storage to store data, such as security
keys and passwords. In addition, a TPM device has encryption and
MOQ – 1
hash functions.

AXXTPME5 implements TPM as per TPM PC Client specifications

revision 1.2 by the Trusted Computing Group (TCG)
Intel® Trusted Platform Module (TPM)

iPC – AXXTPME6 A TPM is a hardware-based security device that addresses the

growing concern on boot process integrity and offers better data
MM# – 947921 protection. TPM protects the system start-up process by ensuring it is
UPC – 00735858314534 tamper-free before releasing system control to the operating system.
 1U / 2U Accessory Kit
EAN – 5032037086059 A TPM device provides secured storage to store data, such as security
keys and passwords. In addition, a TPM device has encryption and
MOQ – 10
hash functions.

AXXTPME6 implements TPM as per TPM PC Client specifications

revision 2.0 by the Trusted Computing Group (TCG)

91
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

Intel® Trusted Platform Module (TPM)

iPC – AXXTPME7 Note: AXXTPME7 compatible for use in China

MM# – 947922 A TPM is a hardware-based security device that addresses the

growing concern on boot process integrity and offers better data
UPC – 00735858314541 protection. TPM protects the system start-up process by ensuring it is  1U / 2U Accessory Kit
EAN – 5032037086066 tamper-free before releasing system control to the operating system.
MOQ – 10 A TPM device provides secured storage to store data, such as security
keys and passwords. In addition, a TPM device has encryption and
hash functions.

AXXTPME7 implements TPM as per TPM PC Client specifications

revision 2.0 by the Trusted Computing Group (TCG)

92
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

7 1U / 2U Spare and Replacement Parts (FRUs)

System integrators and distributors may choose to hold additional stock of individual system components. Intel makes available the following Spare
and Replacement Parts (FRUs) compatible with the specified Intel server family.

Intel Product Code Order Information Product Description Product Type

MM# – 937543
iPC – FXXFPANEL2 Front Panel board spare for use on 1U/2U rack systems (R1000,
UPC – 00735858288712 R2000 except R2224 and R2312) Rack chassis and P4000 Pedestal
EAN – 5032037067997 Chassis. Different from FXXFPANEL by 0.6mm offset of reset and  1U / 2U Spare FRU
power buttons.
MOQ – 1

iPC – FXXCA84X106HS

MM# – 918318
UPC – 00735858236676
1U Heat Sink FXXCA84X106HS (Cu/Al 84mmx106mm)  1U / 2U Spare FRU
EAN - 5032037031448
MOQ – 2

iPC - FR1UFAN10PW
MM# – 935064
Three spare fans for 1U R1000WT system. 40x56mm dual rotor with
UPC – 00735858283342
10p connector.
EAN – 5032037064408  1U Spare FRU
MOQ – 1
Includes 3 fans in the bracket, with grommets preinstalled.

iPC - FR2UFAN60HSW
MM# – 934990
Two spare fans for 2U R2000WT system. 60x38mm, with hot swap
UPC – 00735858283359
connector.
EAN – 5032037064415  2U Spare FRU
MOQ – 1
Includes 2 fans with finger guards and housing.

93
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

iPC – FR1304S3HSBP2
MM# – 947357
UPC – 00735858309264 Hot swap backplane board spare for 1U 4x3.5” chassis
 1U Spare FRU
EAN – 5032037081856 (R1304 family). RoHs compliance.
MOQ – 1

iPC – F1U8X25S3HSBP
MM# – 934888 Hot swap backplane board spare for 1U 8x2.5" chassis (R1208
UPC – 00735858288798 family).
 1U Spare FRU
EAN – 5032037068079
MOQ – 1

iPC – FXX8X25S3HSBP
MM# – 934890 Single port hot swap backplane board spare for 2U 8x2.5" cage
UPC – 00735858288804 (R2200 and P4000 families).
 2U Spare FRU
EAN – 5032037068086
MOQ – 1 Includes one backplane board.

iPC – F2U8X35S3HSBP
MM# – 934892 Hot swap backplane board spare for 2U 8x3.5" chassis (R2308
UPC – 00735858288811 family).
 2U Spare FRU
EAN – 5032037068093
MOQ – 1 Includes one backplane board.

iPC – F2U12X35S3HSBP
MM# – 934893 Hot swap backplane board spare for 2U 12x3.5" chassis (R2312
UPC – 00735858288828 family).
 2U Spare FRU
EAN – 5032037068109
MOQ – 1 Includes one backplane board.

94
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

iPC – A2UHANDLKIT

1U / 2U Rack Handle Kit

This kit includes 3 different rack handles, including:

(1) Set of 2U storage rack handles with control panel and USB
MM# – 936038
support  2U – 24 2.5” Drive Upgrade
UPC – 00735858288866
(R2312WT & R2224WT) Kit
EAN – 5032037068147
 1U / 2U Spares Kit
MOQ – 1
(1) Set of 2U non –storage rack handles
(R2208WT & R2216WT)

(1) Set of 1U rack handles

(R1304WT & R1208WT

iPC – FXX25HSCAR2 MM# – 937542

UPC –00735858289405
EAN – 5032037068383 Spare 2.5” HDD hot swap carriers.  1U / 2U Spare FRU
MOQ – 8

iPC – FXX35HSCAR
MM# – 936192
UPC – 00735858289412 Spare 3.5” hot swap drive carriers.
 1U / 2U Spare FRU
EAN – 5032037068390 Includes mounting screws for mounting 2.5” SSDs.
MOQ – 8

95
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

8 Intel® Visual Compute Accelerators

The Intel® Visual Compute Accelerator brings 4K Ultra High Definition (UHD) media processing capabilities to Intel® Xeon® processor E5 platforms. The
Intel® Visual Compute Accelerator card integrates three Intel® Xeon® E3 processors with Intel® IrisTM Pro graphics and Intel® Media Server Studio-
enabled hardware accelerated video processing into a PCIe* card form factor that fits into Intel® Xeon® processor E5-based servers.

 Offer fast transcoding for video into multiple formats and bit rates reducing the amount of time needed to process the video inputs
 Reduce the amount of storage needed for those multiple formats through higher compression processing
 Allow for real time transcoding into multiple formats from the stored format, reducing the need to store all possible media formats
 Reduces the amount of network bandwidth needed (lower bit rates) at better video quality by compressing the video prior to transmission

The Intel® Visual Compute Accelerator is uniquely capable of supporting the different media processing solutions as it contains three Intel Xeon
processor E3 v4 with Intel Iris Pro Graphics P6300; placing these three processors on a Gen3 x16 PCIe card provides high throughput and low latency
when moving data to and from the card.

Intel Product Code Order Information Product Description Product Type

iPC – VCA1283LVV
 Full-length, full-height, doble width Gen3 PCIe x16
 4 Cores Supported
MM# – 942876  47W TDP
UPC – 00735858309493  Processor Numer E3-1283L v4
 2U Accessory Kit
EAN – 5032037081986  Base freq 2.9 GHz, Max Turbo freq 3.8 GHz
MOQ – 1  Max Memory size 96GB (DDR3-1333/1600/1866)
Note: it requieres to purchase reparately the accesory spare
“AWTCOPRODUCT”

96
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Intel Product Code Order Information Product Description Product Type

 Full-length, full-height, doble width Gen3 PCIe x16

iPC – VCA1585LMV
 4 Cores Supported
 235W Max TDP

MM# – 954907  3 x Intel® Xeon® processors E3-1585L v5

UPC – 00735858334532  Base freq 3.0 GHz, Max Turbo freq 3.7 GHz
 Max Memory size 64GB (DDR4 ECC SODIMMs, 2 channels  2U Accessory Kit
EAN – 5032037099127
per CPU)
MOQ – 1
 8 MB cache
Note: it requieres to purchase reparately the accesory spare
“AWTCOPRODUCT”

97
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

9 Software Security - McAfee® Antivirus for Intel® Server Systems*

McAfee® Antivirus for Intel® Server Systems Accessory is a software accessory offered with the Intel® Server Systems S2600WT product family. It
safeguards systems and files from viruses and other security risks that it detects and removes malware, and configures antivirus policies to manage
quarantined items.
The McAfee® Antivirus for Intel® Server Systems Accessory provides the latest version of either McAfee® Virus Scan® Enterprise for Windows or McAfee®
VirusScan® Enterprise for Linux. There are downloadable 1- or 3-year license and 1- or 3-year renewals at the end of the licensing term.

9.1 How to order it?

Customers have the opportunity to purchase McAfee® Antivirus for Intel® Server Systems from an Intel authorized distributor. Upon placing an order
for one or more McAfee® Antivirus for Intel® Server Systems SKU(s) and registering their purchase, they will receive a certificate from McAfee, asking
them to register the software. Once Registered, they will receive a grant letter from McAfee that includes download instructions.
See http://www.intelserveredge/mcafeeaccessory for more information.

Note: This accessory will only be offered from the Intel site with a qualifying Intel® Server System purchase.
Learn more at:
http://www.intelserveredge/mcafeeaccessory.

9.2 McAfee® Antivirus for Intel® Server Systems

Intel Product Code Order Information Description Supported Operating Systems
1 year license (30-day grace period at end of the term), Supported Operating systems can be located on the Server
MM# – 946352 Two download options: McAfee® VirusScan Enterprise or compatibility list on (THOL) or external web
iPC – SWMAVSE1YR
MOQ - 1 McAfee® VirusScan Enterprise for Linux*.
*Renewal option available for 1- and 3- year terms. http://www.intel.com/content/www/us/en/support/server-
3 year license (30-day grace period at end of the term), products/server-boards/dual-socket-server-boards/intel-server-
MM# – 946354 Two download options: McAfee® VirusScan Enterprise or board-s2600wt-family.html
iPC – SWMAVSE3YR
MOQ - 1 McAfee® VirusScan Enterprise for Linux*.
*Renewal option available for 1- and 3- year terms.
MM# – 946381 1 year renewal of existing license.
iPC – SWMAVSERN1YR Renewal option available.
MOQ - 1
MM# – 946383 3 year renewal of existing license.
iPC – SWMAVSERN3YR Renewal option available.
MOQ - 1

Support link http://support.intel.com/support/motherboards/server/sb/CS-035755.htm

98
Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

99
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

10 Extended Warranty

Image Order Information Description

iPC – SVCEWDPSY Two year extended warranty for Intel® Server Systems or Intel® Server Knock Down Kits + Intel®
Server Boards that support two processors. Intel® RAID controller extended warranty is purchased
MM# – 911295 separately.
MOQ – 1

iPC - SVCEWDPBD
MM# – 911294 Two year extended warranty for Intel® Server Boards that support two processors.
MOQ – 1

iPC - SVCEWRAID Two year extended warranty for Intel® RAID controllers. Batteries are not included in the Extended
MM# – 911298 Warranty. RAID expanders are included as part of the system SKU
MOQ – 1

100
 Intel® Server S2600WT Product Family Configuration Guide and Spares/Accessories List

Glossary of Terms
A list of Acronyms and Terms used throughout this document:
Acronym or Term Definition Acronym or Term Definition
BIK Baseboard In Knock-Down-Kit – Integrated NVMe NVM Express – based on Non-Volatile Memory
System Host Controller Interface Specification
(NVMHCI)
CRPS Common Redundant Power Supply Optional Accessory Hardware that can be added to the system to
enhance the default feature set of the shipping
configuration
EAN International Article Number (Barcode) PCBA Printed Cricuit Board Assembly
EMI Electromagnetic Interference QSFP Quad Small Form factor Pluggable
ESRT2 Intel® Embedded Server RAID Technology 2 RAID Redundant Array of Independent Drives
FDR Infiniband Fourteen Data Rate Infiniband Required Option Hardware that must be added to the shipping
configuration for the system to operate
FRU Field Replaceable Unit RMFBU RAID Maintenance Free Backup Unit
GPGPU General Purpose computing on Graphics RMM4 Lite Intel® Remote Management Module 4 Lite
Processing Unit Activation key
iPC Intel Product Code ROC RAID on Chip
iPN Intel Product Number RSTe Intel® Rapid Stroage Technology
JBOD Just a bunch of drives SAS Serial Attached SCSI
L6 BIK Integrated system with no processors, SATA Serial ATA
memory, or storage devices installed
L8 BIK Integrated system including storage devices, SFF NVMe NVMe SSD in a 2.5” form factor
but no processors or memory
LCP Intel® Local Control Panel SFP Small Form factor Pluggable
KDK Knock-Down-Kit – (Chassis only product) SKU Stock Keeping Unit
KVM Keyboard / Video / Mouse SSD Solid State Drive
MM# Master Material order number UPC Universal Product Code ( Barcode)
MOQ Mimimum Order Quantity

101