A complete range of condensate drains

SCB represents technical ability

and an attentive look at the market allows the company to
guarantee a constant growth.

2
Content 4 6
Guardrain Logidrain 100

8
Logidrain
18Autodrain

20Timedrain
22
Climate areas

23
Selection
Overview
24 Sepdrain

26 HTD
High Pressure
28 CTD
Compact

29 30
Timer Drain Timer drain

MFD Service Kit

Mechanical Accessories
Float Drain
3
 It makes the condensate Guardrain is an IoT device capable of connecting the
condensate drains installed on board of compressed
treatment plant intelligent by air systems, making them surprinsingly intelligent.
Easy to install and configure, Guardrain allows to
monitoring the operation of the moderate the communication within and outside the
system and monitor its global efficiency, thus offering
entire system. a detailed system’s situation in real time.
Guardrain allows to diagnose in a predictive way the
It makes predictive diagnoses and occurrence of anomalous events or malfunctioning
of the elements inside the system and notify them to
signals the onset of problems by the user.

communicating the anomaly to Guardrain allows considerable savings both during

installation and during use, avoiding inefficiencies
the servicing people in charge. and system downtime.
Guardrain can work with the whole range of
condensate drains (LD100S -
LD200S - LD203S)

4
 • Wi-Fi + Ethernet RANGE
connection

LD100S

• Alarm signal contact • Accessible from Cloud

LD200S

LD203S

• SD Card

• Drains and accessories

connection

Power and Technical data

Power supply 24V dc
Power supply Max. consumption (Peak) 40 W
Min. consumption (Standby) 4W
Temperature Working temperature +1/+60 °C
Processor CPU ARM cortex - A7 Quad-core 1.2 GHz
RAM 256MB DDR3 SDRAM
Memory
HD 1 micro SD 8GB
Ethernet 1 x 10/100 Mbps - RJ45
USB 1x Host 2.0
I/O interfaces
CAN 1 x can bus M12 5 pin female A-Type
Alarm 1 x contact bus NO/NC, M12 5 pin male B-Type
Radio interfaces Wi-Fi IEEE 802.11 b/g/n
RTC Yes
LED Supply /LED status
Other
Sensors Temperature, Humidity, Pressure
Key 1 x Reset
Certifications Regulations & Standards EC
Case Material: Anodized Aluminium - Color: Orange
Mechanical Weight (g.) 522
Sizes (Lenght/Depht/Height) 180x47x83
Code 95-100

5
 «ZERO-LOSS» drain system. Electronic condensate drains

No wastage of compressed air.

LogiDrain 100 is an innovative system of automatic
Compact design, condensate drainage, designed to apply on compressors,
aftercoolers, dryers and filters.
minimal space required.
LogiDrain 100 integrates all the solutions suited to
Optimal price- guarantee the drain operation without clogging or waste
of compressed air by using a highly reliable level sensor,
performance ratio. a large orifice with a servo controlled fluoroelastomeric
diaphragm and an integrated stainless steel filter to hold
Adjustable to different power impurities. Easy to clean and maintain.
supply voltages. LogiDrain 100 is extremely easy to install, even in very small
spaces thanks to its compact size and user-friendly “Easy
Integrated filter Lock” connection system. It is possible to realize various
to collect contaminations. connection systems to fit the product at each specific
application: in this way you can optimize the installation and
Easy to clean and maintain.
at the same time minimize handling costs.
FKM (fluoroelastomer) Available in version which fits for the
diaphragm. Guardrain

6
 • Easy-lock
connection

LD100

• Hose holder
with flow
limiter

LD100S
LD100 230 V 115 V 115 V UL 24 V 24 Vdc 24 Vdc
• Integrated filter
to collect Power supply 230 V 115 V 115 V 24 V 24 V 24 V (50/60 Hz)
contamination (±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
Power consumption 10 VA 10 VA
(during drainage)
Operating pressure 0,2-16 bar 0,2-16 bar
Operating +1/+60 °C +1/+60 °C
temperature
IP65 (with connector
Protection class IP65 (with connector and correctly assembled basket) and correctly
assembled basket)
M12 Code A 5
Electrical EN 175301-803 Type B Poles
connection (ex DIN 43650) (Supplied) (Not supplied)
Nominal flow rate 3 3
(m3/min) (1)
Nominal discharge 2 2
(lt/h)
Maximum discharge 5 5
(lt/h)
Maximum
compressor 3 3
capacity (m3/min)
Maximum dryer
capacity (m3/min) 6 6

Maximum filter
capacity (m3/min) 30 30

1 x R1/2”M
Inlet connection 1 x R1/2”M (ISO7) 1 x R1/2”M (ISO7) 1 x R1/2”M (ISO7)
NPT
Outlet connection 1 x ø12 1 x ø12
(with flow limiter)
Weight (kg) 0,4 0,4
Receiver volume (l) 0,06 0,06
Certificates CE CE + UL CE CE
Code 15-152 15-151 15-155 15-153 15-154 15-170
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet temperature of the aftercooler
35° C.

7
 «ZERO-LOSS» drain system. Electronic condensate drain with digital level
control
No wastage of compressed air. The new series of LogiDrain level drains has been designed
to solve the problem of condensation water drainage from
production plants and compressed air distribution systems.
«revolving Easy-lock» connection, The specific technology applied permits a controlled
drainage of condensation water without any compressed
adjustable for vertical and/or air leaks.
LogiDrain is equipped with an integrated storage receiver
horizontal connections. inside which a level sensor has been mounted and is
controlled by an intelligent electronic circuit. All drain
functions are displayed on a control panel. A test button is
Integrated filter to collect available on the control panel for manual drainage.
LogiDrain starts working as soon as a sensor detects
contaminated condensate. water at max. level and controls the opening of the solenoid
valve in order to take the water level back down to a
Easy to clean and maintain. minimum value, leaving a small residual quantity to prevent
the system from discharging compressed air. In case
of trouble, the control circuit unlocks the drain pipes by
FKM (fluoroelastomer) diaphragm. carrying out a series of forced opening/closing cycles of the
solenoid valve. If this is not enough, the problem is reported
outside by an alarm with potential-free contact that can be
Remote alarm connection. used to draw the attention of maintenance staff in order to
instruct the plant control logic.

Available in different LogiDrain is produced in several models with different flow

rates. All versions are suitable for working with any type
of condensation water even the most aggressive one or
supply voltages. water containing a high percentage of oil. A built-in cup of
filter, that is easy to clean, prevents the solenoid valve from
Hard coated receiver resistant to clogging.
LD200L and LD203 models available in
more aggressive condensates. version which fits for the Guardrain.

8
 • Easy-lock

LD101
connection

COMPACT

• Hose holder
with flow
limiter

• Integrated filter LD101 COMPACT 230 V 115 V 115 V UL 24 V 24 Vdc

to collect
contamination
Power supply 230 V 115 V 115 V 24 V 24 V dc
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
Power 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
1 2 3 4 5 6 7
Working pressure8
0,2-16 bar
Working +1/+60 °C
temperature
160 Protection class IP65 (with connector and correctly assembled basket)
139
EN 175301-803 Type B
Electric connection (ex DIN 43650) (Supplied)
M12 Code A 4 Poles
Alarm connection (Not supplied)
Nominal flow 6,3
(m3/min) (1)
107

Nominal drain (lt/h) 3,3

86

Maximum drain (lt/h) 10

Maximum
compressor 6,3
12

capacity (m3/min)
Maximum dryer 12,6
capacity (m3/min)
Nome File:
File Name: V422X-LD101COMPACT 230V STANDARD quote
Foglio:
Sheet: A3Maximum filter
per catalogo SCB
63
capacity (m3/min)
Descrizione:
Description:
Materiale:
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:

1 x G1/2”F
Trattamento termico:
Thermal treatment:
Finitura superficiale:

Inlet 1 x G1/2”F 1 x G1/2”F

Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:

NPT
Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:

Outlet (with flow limiter) 1 x ø12

This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

Weight (kg) 0,5

Receiver volume (l) 0,08
Certificates CE CE + UL CE
Code 15-232 15-231 15-235 15-233 15-234
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
temperature of the aftercooler 35° C.

9
 • Easy-lock

LD101
connection

• Hose holder
with flow
limiter

• Integrated filter LD101 230 V 115 V 115 V UL 24 V 24 Vdc

to collect
contamination
Power supply 230 V 115 V 115 V 24 V 24 V dc
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
Power 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
1 2 3 4 5 6
Working pressure
7 8
0,2-16 bar
Working +1/+60 °C
A
163
temperature
Protection class IP65 (with connector and correctly assembled basket)
141

EN 175301-803 Type B
Electric connection (ex DIN 43650) (Supplied)
B
M12 Code A 4 Poles
Alarm connection (Not supplied)
Nominal flow 7,5
(m3/min) (1)
140

118

Nominal drain (lt/h) 5

C

Maximum drain (lt/h) 15

Maximum
compressor 7,5
capacity (m3/min)
D
12

69
Maximum dryer 15
capacity (m3/min)
Maximum filter
75
E

capacity (m3/min)
Nome File:
File Name: V369-LD101-230-B Foglio:
Sheet: A3
Descrizione:
Description:
Materiale:
Material:
Stato: Approvato da: Scala:

1 x G1/2”F
Status: Approved by: Scale:
Trattamento termico:

Inlet 1 x G1/2”F 1 x G1/2”F

Thermal treatment:
Finitura superficiale:

NPT
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:
Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:

Outlet (with flow limiter) 1 x ø12

F Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

Weight (kg) 0,6

Receiver volume (l) 0,09
Certificates CE CE + UL CE
Code 15-252 15-251 15-255 15-253 15-254

(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
temperature of the aftercooler 35° C.

10
 • Easy-lock
• Hose holder connection

LD101L
with flow
limiter

• Secondary inlet

• Integrated filter LD101L 230 V 115 V 115 V UL 24 V 24 Vdc

to collect
contamination
Power supply 230 V 115 V 115 V 24 V 24 V dc
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
Power 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A

1 2 3 4 5 6 7
Working pressure 8
0,2-16 bar
Working +1/+60 °C
163 temperature
A
141
Protection class IP65 (with connector and correctly assembled basket)
EN 175301-803 Type B
Electric connection (ex DIN 43650) (Supplied)
M12 Code A 4 Poles
Alarm connection
B

(Not supplied)
Nominal flow 7,5
(m3/min) (1)
140
118

Nominal drain (lt/h) 5

C

Maximum drain (lt/h) 15

Maximum
42

compressor 7,5
capacity (m3/min)
D
12

69
Maximum dryer 15
capacity (m3/min)
E
Maximum filter 75
capacity (m3/min)
Nome File:
File Name: V391-LD101-230-B-L Foglio:
Sheet: A3
Descrizione:
Description:
Materiale:
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:

Inlet 1 x G1/2”F + 1 x G3/4”M - G1/2”F (2)

Trattamento termico:
Thermal treatment:
Finitura superficiale:
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:
Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:

Outlet (with flow limiter) 1 x ø12

ISO 2768-1 CLASSE M Peso:
Weight:
F Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

Weight (kg) 0,6

Receiver volume (l) 0,09
Certificates CE CE + UL CE
Code 15-272 15-271 15-275 15-273 15-274
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
temperature of the aftercooler 35° C.
(2) = For NPT version, minimum purchase lots are required. Get in touch with the Customer Service.

11
 • Easy-lock

LD200
connection

• Hose holder
with flow
limiter

• Integrated filter LD200 230 V 115 V 115 V UL 24 V 24 Vdc

to collect
contamination
Power supply 230 V 115 V 115 V 24 V 24 V dc
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
Power 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
Working pressure 0,2-16 bar
1 2 3 4 5 6 7 8

163
Working +1/+60 °C
temperature
A
141

Protection class IP65 (with connector and correctly assembled basket)

EN 175301-803 Type B
Electric connection
B (ex DIN 43650) (Supplied)
M12 Code A 4 Poles
Alarm connection (Not supplied)
Nominal flow
155

15
(m3/min) (1)
133

Nominal drain (lt/h) 10

Maximum drain (lt/h) 20
D Maximum
compressor 15
capacity (m3/min)
12

69
Maximum dryer 30
E
capacity (m3/min)
Maximum filter
Nome File:
File Name: V316-LD200-230V-B Foglio:
Sheet: A3

150
Descrizione:
Description:

capacity (m3/min)
Materiale:
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:
Trattamento termico:
Thermal treatment:
Finitura superficiale:

1 x G1/2”F
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:

Inlet 1 x G1/2”F 1 x G1/2”F

Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:

NPT
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
F Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

Outlet (with flow limiter) 1 x ø12

Weight (kg) 0,7
Receiver volume (l) 0,11
Certificates CE CE + UL CE
Code 15-352 15-351 15-355 15-353 15-354
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
temperature of the aftercooler 35° C.

12
 • Hose holder
with flow
limiter
• Easy-lock

LD200L
connection

• Secondary inlet

LD200S
LD200L 230 V 115 V 115 V UL 24 V 24 Vdc 24 Vdc
• Integrated filter Power supply 230 V 115 V 115 V 24 V
to collect 24 V dc 24 V (50/60 Hz)
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
contamination
Power 10 VA 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A /
Working pressure 0,2-16 bar 0,2-16 bar
Working +1/+60 °C +1/+60 °C
temperature
IP65 (with connector
Protection class IP65 (with connector and correctly assembled basket) and correctly
1 2 3 4 5 6 7 8

163
assembled basket)
141

M12 Code A 5
EN 175301-803 Type B
A

Electric connection Poles

(ex DIN 43650) (Supplied) (Not supplied)
M12 Code A 4 Poles
Alarm connection /
B
(Not supplied)
Nominal flow 15 15
(m3/min) (1)
155
133

C
Nominal drain (lt/h) 10 10
Maximum drain (lt/h) 20 20
Maximum
compressor 15 15
42

D capacity (m3/min)
12

Maximum69 dryer 30 30
capacity (m3/min)
Maximum filter 150 150
capacity (m3/min)
E

LD200L-230-B Nome File:

File Name:
Foglio:
Sheet: A3
Descrizione:
Description:
Materiale:

1 x G1/2”F + 1 x
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:
Trattamento termico:

Inlet 1 x G1/2”F + 1 x G3/4”M - G1/2”F (**) G3/4”M - G1/2”F

Thermal treatment:
Finitura superficiale:
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:

(2)
Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
F Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:
Fornitore: Costo:

Outlet (with flow limiter) 1 x ø12 1 x ø12

This document is property of SCB Bernardi S.r.l.
All rights reserved Supplyer: Cost:

Weight (kg) 0,7 0,7

Receiver volume (l) 0,11 0,11
Certificates CE CE + UL CE CE
Code 15-372 15-371 15-375 15-373 15-374 15-390
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet temperature of the aftercooler
35° C.
(2) = For NPT version, minimum purchase lots are required. Get in touch with the Customer Service.

13
 • Easy-lock

LD202
connection

• Hose holder
with flow
limiter

• Integrated filter LD202 230 V 115 V 115 V UL 24 V 24 Vdc

to collect
2 3 contamination
4 5 6 7 8
Power supply 230 V 115 V 115 V 24 V 24 V dc
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
Power 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
Working pressure 0,2-16 bar
163
Working +1/+60 °C
141 temperature
Protection class IP65 (with connector and correctly assembled basket)
EN 175301-803 Type B
Electric connection (ex DIN 43650) (Supplied)
M12 Code A 4 Poles
Alarm connection (Not supplied)
Nominal flow 30
(m3/min) (1)
Nominal drain (lt/h) 20
214

Maximum drain (lt/h) 35

193

Maximum
compressor 30
capacity (m3/min)
Maximum dryer 60
capacity (m3/min)
Maximum filter 300
capacity (m3/min)
1 x G1/2”F
12

Inlet 1 x G1/2”F 1 x G1/2”F

NPT
69
Outlet (with flow limiter) 1 x ø12
Weight (kg) 1,2
Receiver volume (l) 0,22
Certificates CE CE + UL CE
Code 15-452 15-451 15-455 15-453 15-454

(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
temperature of the aftercooler 35° C.
Nome File:
File Name: V302-LD202-230-B Foglio:
Sheet: A3
Descrizione:
Description:
Materiale:

14
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:
Trattamento termico:
Thermal treatment:
Finitura superficiale:
Vers. Disegnatore Data Surface finishing:
 • Easy-lock
• Hose holder connection

LD202L
with flow
limiter

• Secondary inlet

• Integrated filter LD202L 230 V 115 V 115 V UL 24 V 24 Vdc

to collect
contamination
Power supply 230 V 115 V 115 V 24 V 24 V dc
2 3 4
(±10%) 5
(50/60 Hz) 6 (50/60 Hz) (50/60 Hz)7 (50/60 Hz) 8

Power 10 VA
(during drainage)
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
Working pressure 0,2-16 bar
163 Working +1/+60 °C
temperature
141
Protection class IP65 (with connector and correctly assembled basket)

Electric connection EN 175301-803 Type B

(ex DIN 43650) (Supplied)
M12 Code A 4 Poles
Alarm connection (Not supplied)
Nominal flow 30
(m3/min) (1)
Nominal drain (lt/h) 20
Maximum drain (lt/h) 35
214

193

Maximum
compressor 30
capacity (m3/min)
Maximum dryer 60
capacity (m3/min)
Maximum filter 300
capacity (m3/min)
42

12

Inlet 1 x G1/2”F + 1 x G3/4”M - G1/2”F (2)

Outlet (with flow limiter)69 1 x ø12

Weight (kg) 1,2
Receiver volume (l) 0,22
Certificates CE CE + UL CE
Code 15-472 15-471 15-475 15-473 15-474
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
temperature of the aftercooler 35° C. C685
(2) = For NPT version, minimum purchase lots are required. Get in touch with the Customer Service.
KIT_017 F_12
Nome File:
File Name: LD202L-230-B Foglio:
Sheet: A
Descrizione:
Description:
Materiale:
Material:
Stato:
Status:
Approvato da:
Approved by: 15Scale:
Scala:

Trattamento termico:
Thermal treatment:
Finitura superficiale:
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:
 • Secondary inlet
• Easy-lock

LD203
connection

• Hose holder
with flow
limiter

LD203S
LD203 230 V 115 V 115 V UL 24 V 24 Vdc 24 Vdc

Power supply 230 V 115 V 115 V 24 V

• Integrated filter 24 V dc 24 V (50/60 Hz)
to collect (±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
contamination Power
(during drainage) 10 VA 10 VA
2 3 4
Alarm contact
5 6
Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
7 8
/
Working pressure 0,2-16 bar 0,2-16 bar
Working +1/+60 °C +1/+60 °C
temperature
173 IP65 (with connector
Protection class IP65 (with connector and correctly assembled basket) and correctly
152 assembled basket)
132
M12 Code A 5
EN 175301-803 Type B
Electric connection Poles
(ex DIN 43650) (Supplied) (Not supplied)
M12 Code A 4 Poles
Alarm connection /
(Not supplied)
Nominal flow 160 160
(m3/min) (1)
34 Nominal drain (lt/h) 90 90
230

Maximum drain (lt/h) 150 150

209

Maximum
compressor 160 160
capacity (m3/min)
Maximum dryer
66

320 320
capacity (m3/min)
28

Maximum filter 1600 1600

capacity (m3/min) 122,5

1 x G1/2”F + 1 x
Inlet 1 x G1/2”F + 1 x G3/4”M - G1/2”F (2) G3/4”M - G1/2”F
(2)
Outlet (with flow
1 x ø12 1 x ø12
Nome File:
File Name: LD203 Y10 Evo - CONFIGURAZIONE STANDARD Foglio:
Sheet: A3

limiter)
Descrizione:
Description:
Materiale:
Material:

Weight (kg) 1,8

Stato: Approvato da: Scala:
Status: RELEASED Approved by: F.ALOI Scale: 1:2
Trattamento termico:
Thermal treatment:
Finitura superficiale:

Receiver volumeX (l)F.ALOI 0,5 0,11

Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:
09-10-14 Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:

Certificates CE CE + UL CE CE
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
Codice:

Code 15-552 15-551 15-555 15-553 15-554

Code:
LD203 Evo
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet temperature of the after-
cooler 35° C.
(2) = For NPT version, minimum purchase lots are required. Get in touch with the Customer Service.

16
 • Easy-lock
• Hose holder connection

LD204
with flow
limiter

6 7 8 9 10 •11 Vertical secondary inlet

12

Revisioni

Area Rev. Descrizione Data Approvata

• Integrated filter
to collect
contamination

LD204 230 V 115 V 115 V UL 24 V 24 Vdc

Power supply 230 V 115 V 115 V 24 V
ER BROCHURE LDY10 IN COREL DRAW 24 V dc
(±10%) (50/60 Hz) (50/60 Hz) (50/60 Hz) (50/60 Hz)
• Secondary inlet Power 10 VA
(during drainage)
247
Alarm contact Contact NC/NO: 240V Ac max - 1A / 30V Dc max - 1A
189
163 Working pressure 0,2-16 bar
141 Working +1/+60 °C
temperature
Protection class IP65 (with connector and correctly assembled basket)
EN 175301-803 Type B
Electric connection (ex DIN 43650) (Supplied)
M12 Code A 4 Poles
Alarm connection (Not supplied)
Nominal flow 300
(m3/min) (1)
230

209

Nominal drain (lt/h) 200

163

Maximum drain (lt/h) >350

Maximum
compressor 300
71

capacity (m3/min)
28

Maximum dryer 600

capacity (m3/min)
Maximum filter 3000
capacity (m3/min)
Inlet 2 x G1/2”F + 1 x G3/4”F

Outlet (with flow limiter) 1 x ø12

NOTE: Weight (kg) 3,45
RECEIVER CAPACITY: 1,5 lt.
Receiver volume
COMPRESSOR CAPACITY: (l)
300 m3/min. 1,5
Certificates
LD204 Y10 230V Ac
CE CE + UL CE
Nome File: Foglio:
File Name: Sheet: A2
Descrizione:
Description:
Materiale:

Code 15-652 15-651 15-655 15-653 15-654

Material:
Stato: Approvato da: Scala:
DRAFT
Status: F.ALOI
Approved by: Scale: 1/2
Trattamento termico:
Thermal treatment:
Finitura superficiale:

(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar and outlet
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:

temperature of the aftercooler 35° C.

X F.ALOI 04-06-13 Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
Codice:
Code:
V412
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

17
 Compact design, Automatic self-calibrating
condensate drain
adjustable for very low
AutoDrain is an automatic drain able
points of the plant.
to discharge condensation cyclically.

Self-calibrating AutoDrain has a built-in timed

discharge timing. electronic circuit, a condensation

sensor and an assisted-drive solenoid
Optimal price- valve, which opens at preestablished
intervals. The opening time varies
performance ratio.
according to the actual quantity of

Integrated filter condensation at the installation point.

This allows to limit compressed air
to collect contamination.
waste to a minimum.

FKM (fluoroelastomer) AutoDrain does not require setting

diaphragm. waiting and discharge times since

the product is totally self-calibrating.
AutoDrain 925 230 V 115 V 24 V ac/dc
The front control panel (version 950)
230 V 115 V
Power supply (±10%) 24 V ac/dc contains two LEDs displaying power
(50/60 Hz) (50/60 Hz)
Power consumption 10 VA supply and drain state. A button
(during drainage)
Operating pressure 0,2-16 bar permits to control the drain manually.
Operating temperature +1/+60 °C
AutoDrain is extremely small and
IP65 (with connector and correctly assembled
Protection class
basket) can be installed at any position
EN 175301-803 Type A
Electrical connection and anywhere in a compressed air
(ex DIN 43650) (Supplied)
Nominal flow rate (m3/in) (1) 60 installation.
Niminal discharge (lt/h) 40
To make its installation easier
Maximum discharge (lt/h) 70
Maximum compressor AutoDrain includes an industrial
capacity (m3/min) 60
connector (ex DIN 43650) for power
Maximum dryer
capacity (m3/min) 120
supply and an Easy Lock three-part
Maximum filter 600
capacity (m3/min) fitting for pneumatic connection.
Inlet connection 1 x R3/8”M
Outlet connection ø10 mm
(with flow limiter)
Weight (kg) 0,215
Certificates n/a
Code 35-823 35-822 35-821
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7 bar
and outlet temperature of the aftercooler 35° C.

18
 • Easy-lock
connection

• Hose holder
with flow
limiter

AutoDrain 925 230 V 115 V 24 V ac/dc

• Command 230 V 115 V

Power supply (±10%) 24 V ac/dc
panel (50/60 Hz) (50/60 Hz)
(only for 950)
1 2 3 4 5 Power consumption
6 7
10 VA
8

(during drainage)
Operating pressure 0,2-16 bar
Operating temperature +1/+60 °C
IP65 (with connector and correctly assembled
Protection class
basket)
102 EN 175301-803 Type A
Electrical connection (ex DIN 43650) (Supplied)
Nominal flow rate (m3/in) (1) 60
Niminal discharge (lt/h) 40
Maximum discharge (lt/h) 70
Maximum compressor
66

capacity (m3/min) 60

Maximum dryer
capacity (m3/min) 120
120

Maximum filter 600

capacity (m3/min)
Inlet connection 1 x R3/8”M
Outlet connection ø10 mm
(with flow limiter)
Weight (kg) 0,215
Certificates n/a
62
Code 35-843 35-842 35-841
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity. Operating pressure 7
bar and outlet temperature of the aftercooler 35° C.

Nome File:
File Name: AD950T-230-B Foglio:
Sheet: A3
Descrizione:
Description:
Materiale:
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:
Trattamento termico:
Thermal treatment:
Finitura superficiale:
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:
Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

19
 Compact design, Timed condensate drain
TimeDrain is an automatic drain system capable of
minimal space required. removing cyclically condensate water. TimeDrain integrates
a digital timer and a servo-controlled solenoid valve, which
Precise and intuitive is periodically opened according to T-on and T-off times
planned by using its control panel.
programming. TimeDrain makes time regulation extremely precise thanks
to its selector with eight different sectors which enables
Optimal price- the choice among eight different pause times (T-Off) and
a button for setting three drainage levels (T-on). The same
performance ratio. button has a double testing function, useful to check if the
drainage system works correctly.

Integrated filter to collect TimeDrain has a really small size and it can be installed in
each kind of position and at each point of the compressed
contamination. air plant.

In order to make the installation much easier TimeDrain

FKM (fluoroelastomer) is equipped with a DIN 43650 plug for connecting to
the power supply and an Easy-Lock connection inlet for
diaphragm). connecting to the pneumatic system.

20
 • Easy-lock
connection

• Hose holder
with flow
limiter

TimeDrain 230 V 115 V

230 V 115 V
Power supply (50/60 Hz ) (50/60 Hz)
Power consumption 10 VA
(during drainage)
2 3 4 5 6 7 8

Operating pressure 0,2-16 bar

Operating temperature +1/+60 °C
• Program selector IP65
Protection class (with connector and correctly
assembled gasketi)
EN 175301-803 Type B
Electrical connection (ex DIN 43650) (Supplied)
Nominal flow rate (m3/min) (1) 60
Nominal discharge (lt/h) 40
Maximum discharge (lt/h) 40
Maximum compressor 60
capacity (m3/min)
Maximum dryer 120
116

capacity (m3/min)
Maximum filter 600
capacity (m3/min)
Inlet connection 1 x R3/8”M
Outlet connection ø10 mm
(with flow limiter)

117 44
Weight (kg) 0,18
Certificates n/a
Code 45-885 45-886
(1) = Data refer to 1000 mbar(a), 20° C and 60% relative humidity.
Operating pressure 7 bar and outlet temperature of the aftercooler 35° C.

Nome File:
File Name: V266-TD-230-B Foglio:
Sheet: A3
Descrizione:
Description:
Materiale:
Material:
Stato: Approvato da: Scala:
Status: Approved by: Scale:
Trattamento termico:
Thermal treatment:
Finitura superficiale:
Vers. Disegnatore Data Surface finishing:
Vers. Drawn by Date
Trattamento superficiale: Colore:
Surface treatment: Colour:
Quote senza indicazione di tolleranza secondo Norma: Densità:
Dimensions without tolerance according to Std: Density:
ISO 2768-1 CLASSE M Peso:
Weight:
Codice:
Disegno di proprietà di SCB Bernardi S.r.l. che si riserva
tutti i diritti di legge Code:
This document is property of SCB Bernardi S.r.l. Fornitore: Costo:
All rights reserved Supplyer: Cost:

F38 KIT_018 KIT_022 KIT_023

21
 condensate drains SCB
Climate areas and technical specifications

LogiDrain TimeDrain AutoDrain

LD100 LD101 LD101(L) LD200(L) LD202(L) LD203 LD204 TD AD 925 (950)

COMPACT

3,6 7,6 9 18 36 190 360 70 70

Compressor
capacity 3 6,3 7,5 15 30 160 300 60 60
m3/min
1,8 3,8 4,5 9 18 96 180 35 35

7 15 18 36 72 380 720 144 144

Dryer
capacity 6 13 15 30 60 320 600 120 120
m3/min
3,5 7,5 9 18 36 190 360 70 70

36 76 90 180 360 1900 3600 700 700

Filter
capacity 30 63 75 150 300 1600 3000 600 600
m3/min
18 38 45 90 180 960 1800 350 350

GREEN FIELDS cold and dry climate: Northern Europe, Canada, North America, Central Asia
BLUE FIELDS moderate climate: Central and Southern Europe, Central America, Northern and Southern Africa and central areas of South America
RED FIELDS hot and humid climate: Southern tropic areas, equatorial areas

22
 Se Selection Overview

COMPRESSOR PERFORMANCES

COMPRESSOR COMPRESSOR
OUTPUT DELIVERY AFTERCOOLER TANK PREFILTER DRYER FILTER PIPELINE
(KW) VOLUME (m3/min)

LD100
< 15 3 AD925

30 6 LD101COMPACT LD101COMPACT
LD101 LD100
55 10 AD925 AD925

75 15
LD200 LD100 LD101COMPACT
110 20 LD100
AD950 LD101L AD950
LD101COMPACT AD950
AD950 TD LD101
130 25
TD LD101COMPACT TD
AD950
145 30
LD101COMPACT
LD202 LD100
200 35
AD950 AD950
LD200 TD
250 40
AD950
300 60

355 70
LD200L LD202
LD203 LD101COMPACT LD101COMPACT
TD LD101
560 100 LD101
AD950 TD
750 140
LD202L
900 175
TD
LD200
1200 200 LD203 LD200
TD
LD204
1300 250 LD101
LD203
LD101COMPACT
1500 300 LD202 LD202

The specifications contained in this chart refer to a temperate climate (blue) that is dominant in most industrialized areas.

23
 Water /oil separator
SepDrain is suitable to separate oil from condensate
into air compressed systems.

SepDrain is the very new condensate separator

ready to offer you:
• 100% performance even on new synthetic
compressor lubricants
• simplified maintenance
• concentrations of outgoing oil below 10 ppm/l
• saving-space solution
• recycled and eco-friendly materials
• high reliability

Its Twin System technology will allow you to

double or triple the condensate treatment capacity
and reduce the amount of residual contaminant.

• Twin system

24
 SepDrain operation

The condensate is introduced into the

separator through the decompression
The condensate drops down inside
chamber located in the cover
the separator body through a hole in
the lid

PRE-FILTER BAG

Through a filtration process, the pre-

filter bag and the actived carbon bag
make condensate free from oil and
solid particles
ACTIVED CARBON
BAG

After this process the condensate can be discharged

into the sewer system, unless otherwise required
by law regarding the disposal of waste water in the
country where the installation takes place

Sepdrain 1.7 Sepdrain 2.8 Sepdrain 8.5 Sepdrain 21 Sepdrain 42

Code 65-965 65-961 65-962 65-963 65-964

Nominal flow rate (m3/min) 1.7 2.8 8.5 21 42
Connection (BSP-F) 1/4” 1/2” 1/2” 3/4” 3/4”
Dimensions HxD (mm) 220 x 145 460 x 200 600 x 280 930 x 430 930 x 430 (x2)
Weight (Kg) 1 5 11 29 58

25
 Timer-controlled Condensate Drain

99 Compact design
99 Simple to install and fully automatic
99 Two potentiometers to set T-on and T-off to suit any
size of devices
99 Two LEDs allow to visualize the operating status
99 Test button to drain the condensate manually and
check the valve function
99 NPT connection available for version 115V Ac
99 Supplied with connector plug type A (DIN43650A ISO
440/6952)
99 NC 2/2 way direct acting valve (made in Europe)

Size

The dimensions may vary when using different types of valves.

26
 • Timer Unit

HTD30 HTD100 HTD350

Timer Drain: 230V 115V 24Vac 230V 115V 24Vac 230V 115V
GAS NPT GAS GAS NPT GAS GAS NPT
SCB p/n 75-983 75-984 75-985 75-991 75-992 75-993 75-995 75-996

Working pressure 30 bar 100 bar 350 bar 400 bar

Valve vent (ø) 1,5 mm 1,2 mm 1 mm

Kv (a 1 bar) 1,4 lt/min 1 lt/min 0,3 lt/min

Power 8W 17VA 8W 17W 16W

IN/OUT connection Gas ¼” Npt ¼” Gas ¼” Gas ¼” Npt ¼” Gas ¼” Gas ¼” Npt ¼”
230V 115V 24V 230V 115V 24V 230V 115V
Voltage 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz

Valve’s body material brass brass Inox Inox

Gaskets FKM PTFE PU Peek

Timer approval CE – UL (e488201)

Valve approval CE, UL, CSA, VDE CE - UL

T-on Draining time 0,5 to 10 seconds

T-off Interval 0,5 to 45 minutes

Working temperature + 1° C / + 60° C

27
 Timer-controlled Compact Condensate Drain

99 Compact design
99 Simple to install and fully automatic
99 Large vent for a reliable discharge
99 Configurated with an integrated ball-valve and strainer
with double inlet thread (½”M and ¼”F), easy to clean
99 Two potentiometers to set T-on and T-off to suit any
size of compressed air devices
99 Two LEDs allow to visualize the operating status
99 Test button to drain the condensate manually and
check the valve function
99 NPT connection available for version 115V Ac
99 Supplied with connector plug type A (DIN43650A ISO
440/6952)
99 Supplied with hose holder
99 NC 2/2 way direct acting valve
99 CE approved and UL certified (e488201)
99 Supplied with hose connector

• Timer Unit

Size
Timer Drain CTD 230V CTD 115V

SCB p/n 75-971 75-972

Working pressure 0,2 - 16 bar
Valve vent (ø) 3,5 mm
Kv (a 1 bar) 4,3 l/min.
Power 22 VA
IN/OUT connection Gas ½” Npt ½”
Voltage 230V 50/60 Hz 115V 50/60 Hz
Valve’s body material Brass
Gaskets NBR, Viton
T-on Draining time 0,5 to 10 seconds
T-off Interval 0,5 to 45 minutes
Working temperature + 1° C / + 60° C

28
 Mechanical Condensate Drain

99 Simple and reliable product

99 Suitable to any air compressed points (air
compressor, aftercooler, pressure vessel, dryer, filter)
99 Works with oil-contaminated condensate (unsuitable to
oil-free applications)

99 Power connection not required

99 No air loss
99 Simple to install and fully automatic. Requires no
configuration or testing
99 ½” female connections
99 Supplied with inlet ½” male adapter fitting
99 Manual exhaust to drain condensate manually and
check the valve function
99 Operating pressure up to 16 bar
99 EC (CE) approved

Mechanical Drain MFD Gas ½”

SCB p/n 85-050

Operating pressure 0,2 to 16 bar (3-232 psi)
Working temperature (°C) + 1° C / + 60° C
Valve vent (ø) 2,5 mm
Type of valve Direct operation, NC
Nominal volume (1) 20000 m³/h
Drain capacity (at 7 bar) 2,8 l/min (167 l/h)
Drain capacity (at 10 bar) 4,2 l/min (250 l/h)
IN/OUT thread Gas ½”
Size Tank Aluminum
G1/2” Tank volume 0,4 l
Float Stainless steel
Gaskets NBR

146
Plastic coating PA6
Weight (kg) 0,6
SR108
G1/2” Dimensions (mm) 135x110x130 (without inlet fitting)
Certified CE
134,7 32 (1): Refer to 1 bar and 20 °C at 7 bar operating pressure, intake air of compressor 25 °C at 60% of relative
humidity, 35 °C compressed air temperature.

29
service kit accessories
LD100

KIT_001
Maintenance kit
with key plug

KIT_002
Filter with key plug

KIT_003
Maintenance kit
valve body
with key plug

C683
Thermo controlled
resistance
for LD100 and
LD101 Compact
LD101 COMPACT - LD101
LD200 - LD202 - LD101L
LD200L - LD202L

KIT_001
Maintenance kit
with key plug

30
service kit accessories

LD101 COMPACT - LD101 - LD200 - LD202 - LD101L - LD200L - LD202L

KIT_002
Filter with key plug

KIT_003
Maintenance kit
valve body
with key plug

C685
Thermo controlled
resistance

KIT_017
Inlet adapter for
tube of ø 8 mm
LD203 - LD204

KIT_027
Maintenance kit
with HEX socket
plug

31
service kit accessories
LD203 - LD204

KIT_029
Filter with HEX
socket plug

KIT_031
Maintenance kit
valve body with HEX
socket plug

KIT_032
Support brackets

C686
Thermo controlled
resistance
for candlestick
LD101L - LD200L
LD202L - LD203

F12
Easy lock connection
R 1/2” M with seal

32
service kit accessories

AUTODRAIN
C661
Maintenance kit

C664
Complete valve body
230V

C665
Complete valve body
115V

F38 TIMEDRAIN
Easy lock connection
G 3/8” F
with flat seal

KIT_018
Inlet filter

33
service kit accessories
TIMEDRAIN

KIT_022
Tap M 1/2”
with integrated filter
KIT_023
Tap M 3/8”
with integrated filter
CTD - HTD

C715
Power connector with
2 meter cable
GUARDRAIN

C724
Universal power
connector

C721
Daisy chain 3 meter cable
C722
Daisy chain 5 meter cable
C723
Daisy chain 10 meter cable

C724
Power connector for
GuarDrain with sping

34
notes

35
SCB srl
One Person Company

Via Caduti sul Don, 5

12020 Villar San Costanzo (CN) - Italy
VAT number: IT03688460041
Tel. +39 0171 902258
Fax +39 0171 902280
info@scb-italy.com
www.scb-italy.com

TIFIE
ER

ISO
C

9001:2015
C
O M PA N
Y

Rev. 09 18-03-19