Put cursor on number

or click for description

®
Spectra Optia Exchange Set
Catalog No. 12220

20

19

21

9 23

22 18

14 17
15

13
10

1 2 11
3 4

5
12
6
16

1 Inlet line 9 Saline line (green) 17 Channel

2 Inlet line manifold 10 Inlet line trap 18 Connector
3 Inlet saline line clamp (red) 11 Inlet pressure sensor diaphragm 19 Vent bag
4 AC check valve 12 Centrifuge pressure sensor diaphragm 20 Remove bag
5 Return line 13 Reservoir 21 Remove line
6 Return line manifold 14 Return pressure sensor diaphragm 22 Extra remove line
7 Return saline line clamp (blue) 15 Plasma pressure sensor diaphragm 23 Replace line
8 Anticoagulant (AC) line (orange) 16 Centrifuge loop

©2015 Terumo BCT, Inc. Part No. 306611-010

 Spectra Optia® Exchange Set
Catalog No. 12220
Part Descriptions

1. Inlet line: Used to carry anticoagulated blood from the patient to the channel. Includes:
 Luer connector (male): Connects the inlet line to the patient inlet access.
 Inlet line clamp (red): Used to clamp the inlet line.

2. Inlet line manifold: Provides a connection point for the inlet line, the AC line, and the inlet saline line.
Includes an injection port.

3. Inlet saline line clamp (red): Used to close the inlet saline line or to control the flow of saline to the
patient.

4. AC check valve: Allows the system to pump AC through the tubing but prevents the free flow of AC.

5. Return line: Used to carry fluid from the reservoir to the patient. Includes:
 Luer connector (male): Connects the return line to the patient return access.
 Return line clamp (blue): Used to clamp the return line.

6. Return line manifold: Provides a connection point for the return line and the return saline line.
Includes:
 Injection port (needleless): Provides an access site for the infusion of medication or the drawing
of samples.

7. Return saline line clamp (blue): Used to close the return saline line or to control the flow of saline to
the patient.

8. Anticoagulant (AC) line (orange): Used to carry AC from the AC container to the inlet line manifold.
Includes:
 Luer connector: Unique connector used to connect an ACD-A bag that has a compatible luer
connector.
 Sterile barrier filter (0.2 microns): Prevents air from entering the line.

9. Saline line (green): Used to carry saline from the saline container to the inlet line manifold and to
the return line manifold. Includes:
 Spike (green): Used to spike the saline container.

10. Inlet line trap: Prevents larger solid cellular matter from entering the channel.

11. Inlet pressure sensor diaphragm: Attaches to the inlet pressure sensor on the front panel to monitor
pressure in the inlet line.

12. Centrifuge pressure sensor diaphragm: Attaches to the centrifuge pressure sensor on the front
panel to monitor pressure in the channel and the lines in the centrifuge.

©2015 Terumo BCT, Inc. Part No. 306611-010

Spectra Optia Exchange Set Part Descriptions

13. Reservoir: Used to hold the fluid that is returned to the patient. Includes a 200-micron filter.

14. Return pressure sensor diaphragm: Attaches to the return pressure sensor on the front panel to
monitor pressure in the return line.

15. Plasma pressure sensor diaphragm: Attaches to the plasma pressure sensor on the front panel to
monitor pressure in the plasma line.

16. Centrifuge loop: Consists of lines that are loaded in the centrifuge. Includes:
 Four-lumen tubing: Used to carry fluid into and out of the channel.
 Sleeves: Used to reinforce the tubing.
 Collars: Used to secure the ends of the loop in the centrifuge.
 Bearings: Used to connect the loop to the centrifuge.

17. Channel: Used during centrifugation to separate the patient’s blood into cellular components.

18. Connector: Secures the lines that carry the separated components out of the channel.

19. Vent bag: Holds air that is displaced from the system.

20. Remove bag: Holds removed blood components.

21. Remove line: Used to carry removed blood components to the remove bag.

22. Extra remove line: Used to carry removed blood components to an extra remove bag or to an
extension line, if connected. Includes:
 Luer connector (female): Connects the extra remove line to an extra remove bag or to an
extension line.
 Clamp (yellow): Used to clamp the extra remove line.

23. Replace line: Used to carry replacement fluid from the replacement fluid container to the reservoir.
Includes:
 Spikes (white): Used to spike the replacement fluid container.
 Clamps (white): Used to clamp the lines to the spikes for the replacement fluid.
 Luer connector (male/female): Connects the replace line to a filter or blood warmer tubing, if
used.

©2015 Terumo BCT, Inc. Part No. 306611-010