Scribd
Upload
173 views13 pages

36" Metal Cabinet

The document provides detailed installation instructions for assembling a cabinet, including a list of parts and their quantities. It outlines the steps to properly connect the rear walls, sidewalls, and door panels, ensuring correct placement to avoid assembly issues. Additional notes include attaching support clips and securing the cabinet to the wall as needed.

Uploaded by

walmartsfm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views13 pages

36" Metal Cabinet

The document provides detailed installation instructions for assembling a cabinet, including a list of parts and their quantities. It outlines the steps to properly connect the rear walls, sidewalls, and door panels, ensuring correct placement to avoid assembly issues. Additional notes include attaching support clips and securing the cabinet to the wall as needed.

Uploaded by

walmartsfm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Installation Instructions

A×1 B×1 C×1 D×1

E×1 F×1

G×2 H×1

I×1 J×1 K×2

L×30 M×3 N×3 O×2 P×8 Q×4 R×2 U×2


Standby Application
E
K

A C
D K
J
I G
B

×2
Before assembling, please check all parts, important reminder:
Rear wall C and door panel J are stuck together, rear wall D and door panel I are stuck together.
Simply take the door panels I and J out of the rear wall panels and you will find the parts labeled
C and D.

J I D
C

J&C I&D
1 Put the two rear walls together and put three bolts and nuts to hold them in place.

C
D

M×3 N×3
Simply overlap each sidewall in the channel of the rear wall and put three screws on each side
2 to hold them in place.

Note that Part A is on the left side and Part B is on the right side. If they are misplaced,
it will affect the assembly.

L×3
Simply overlap each sidewall in the channel of the rear wall and put three screws on each side
3 to hold them in place.

Note that Part A is on the left side and Part B is on the right side. If they are misplaced,
it will affect the assembly.

L×3

4 Snap the three buckles on either side of Part H into the three holes in both side panels and then
push it down, so that it snaps into the bottom of the cabinet.

2 1
L
L×4
5 When placing Part F, place the notched side facing forward.

L×4
7 Put eight screws from inside to hold them into place.

L L
E

L×8

8 Place Parts K into the top from the inside and attach them with the eight screws.

K
K

L×8
9 The cabinet can be fixed to the wall as needed.

R×2

10 Put four support clips P in the four corners of the cabinet, taking care to place them on the same level.

P×8
11

Install the door on one side by first installing the door pin O,
then by pressing the spring sshaft on the top of the door.
12 If the spring shaft is missing from the door, you can
find the screw U in the hardware package to install it.

I
Q

O O×1
Q×2
If the spring shaft is missing from the door, you can
13 find the screw U in the hardware package to install it.

Q J

O 1
O×1
Q×2

14

S×2
T×4

You might also like