ALUMINUM ELECTROLYTIC CAPACITORS
ES
Bi-Polarized, For Audio Equipment
series
Bi-polarized “nichicon MUSE” acoustic series.
Suited for audio signal circuits.
Compliant to the RoHS directive (2002/95/EC).
ES Bi-polarized FW
Specifications
Item Performance Characteristics
Category Temperature Range – 40 to +85°C
Rated Voltage Range 6.3 to 50V
Rated Capacitance Range 0.47 to 1000µF
Capacitance Tolerance ± 20% at 120Hz, 20°C
Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50
tan δ (MAX.) 0.24 0.20 0.16 0.16 0.14 0.12
Measurement frequency : 120Hz
Rated voltage (V) 6.3 10 16 25 35 50
Stability at Low Temperature Z– 25°C / Z+20°C 4 3 2 2 2 2
Impedance ratio
ZT / Z20 (MAX.) Z– 40°C / Z+20°C 8 6 4 4 4 4
The specifications listed at right shall be met when the
Capacitance change Within ±20% of the initial capacitance value
capacitors are restored to 20°C after the rated voltage
Endurance tan δ 150% or less than the initial specified value
is applied for 1000 hours at 85°C with the polarity
Leakage current Less than or equal to the initial specified value
inverted every 250 hours.
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause
Shelf Life
4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking Printed with black color letter on clear green sleeve.
Radial Lead Type Type numbering system (Example : 10V 47µF)
Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11
UE S 1 A 4 7 0 MEM
φD+0.5 MAX.
P ± 0.5
Configuration
φD Code
Capacitance tolerance ( ± 20%) 5 DM
(mm) Rated capacitance (47µF) 6.3 EM
Pressure φD 5 6.3 8 10 12.5 16 Rated voltage (10V) 8 · 10 PM
relief vent
(φ6.3up) P 2.0 2.5 3.5 5.0 5.0 7.5 12.5 · 16 HM
L+ MAX. 15MIN 4MIN Series name
φd 0.6 0.6 0.6 0.6 0.8 0.8
Type
(φD < 10) 1.0
• Please refer to page 20 about the end seal (φD 10) 1.5
configulation.
Dimensions φ D × L (mm)
V 6.3 10 16 25 35 50
Cap.(µF) Code 0J 1A 1C 1E 1V 1H
0.47 R47 5 × 11
1 010 5 × 11
2.2 2R2 5 × 11
3.3 3R3 5 × 11
4.7 4R7 5 × 11 5 × 11 6.3 × 11
10 100 5 × 11 5 × 11 6.3 × 11 8 × 11.5
22 220 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5
33 330 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16
47 470 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20
100 101 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25
220 221 10 × 12.5 10 × 16 10 × 20 12.5 × 25 12.5 × 25 16 × 25
330 331 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5
470 471 10 × 20 12.5 × 20 12.5 × 25 16 × 25 16 × 25
1000 102 12.5 × 25 16 × 25 16 × 25 16 × 31.5
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
CAT.8100Z
