Validate Print Help Item Rate BoQ

Tender Inviting Authority: Chief General Manager (Tech), Regional Affairs

Name of Work: Construction of Transit Camp-II at Cotton Road, Tezpur, Assam.

Contract No: NIB No. 01 Dtd. 27.12.2024

Name of the
Bidder/ Bidding
Firm / Company
:

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowe

NUMBER # TEXT # NUMBER # TEXT # NUMBER # NUMBER #

BASIC RATE WITH TAXES In Figures To

Sl. be entered by the Bidder
Item Description Quantity Units TOTAL AMOUNT With Taxes
No. Rs. P

1 2 4 5 13 53
1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means 300.000 Sqm 0.00
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)
including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m,
as directed by Engineer-incharge All kinds of soil.

2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in 185.310 Cum 0.00
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50
m. Ordinary soil
3 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations 15.830 Cum 0.00
etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by
ramming and watering, lead upto 50 m and lift upto 1.5 m.
4 Supplying and filling in plinth with sand under floors, including watering,ramming, 5.640 Cum 0.00
consolidating and dressing complete.
5 Providing soling in foundation and under floor with stone/best quality picked jhama 371.830 Sqm 0.00
brick, sand packed and laid to level and in panel after preparing the subgrade as
directed including all labour and materials and if necessary dewatering complete.
Stone soling of thickness 150mm.

6 Pre construction anti-termite treatment at the bottom of foundation pits and walls on 112.910 Sqm 0.00
either side upto a height of 300mm from bottom of the excavation made colum, plinth
beam,walls, trenches etc. by applying the emulsion @5(five) litrs per square meter of
the surface area before starting construction work (supplying necessary tools &
accessories by the contractor as per direction of the department complete.
a) With aqueous emulsion having concentration 1:19 with chloropirophose solution
(tricel or equivalant) and water, i.e 1% solution.
7 Providing and laying in position cement concrete of specified grade excluding the cost 8.220 Cum 0.00
of centering and shuttering - All work up to plinth level.
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources)
8 Providing and laying in position cement concrete of specified grade excluding the cost 5.822 Cum 0.00
of centering and shuttering - All work up to plinth level.
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from natural sources)
9 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in 3665.000 Kg 0.00
position and binding all complete upto plinth level. Cold twisted bars For
Footing,Column up to PL,Plinth/Tie Beam
10 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in 4605.000 Kg 0.00
position and binding all complete above plinth level. Cold twisted bars (For
Column above GL ,Chajja,Lintel Beam,Slab Beam,ST Cover,Kitchen Slab)

11 Centering and shuttering including strutting, propping etc. and removal of form for 69.600 Sqm 0.00
Foundations, footings, bases of columns, etc. for mass concrete
12 Centering and shuttering including strutting, propping etc. and removal of form for 1.220 Sqm 0.00
Suspended floors, roofs, landings, balconies and access platform
13 Centering and shuttering including strutting, propping etc. and removal of form for 24.000 Rm 0.00
Edges of slabs and breaks in floors and walls under 20 cm wide
14 Centering and shuttering including strutting, propping etc. and removal of form for 3.600 Sqm 0.00
Shelves (Cast in situ)
15 Centering and shuttering including strutting, propping etc. and removal of form for 272.030 Sqm 0.00
Lintels, beams, plinth beams, girders, bressumers and cantilevers
16 Centering and shuttering including strutting, propping etc. and removal of form for 163.560 Sqm 0.00
Columns, Pillars, Piers, Abutments, Posts and Struts
17 Providing and laying in position specified grade of reinforced cement concrete, 37.050 Cum 0.00
excluding the cost of ntering, shuttering, finishing and reinforcement - All work up to
plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

18 Reinforced cement concrete work in walls (any thickness), including attached pilasters, 8.610 Cum 0.00
buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and
struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering,
finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived
from natural sources : 3 graded stone aggregate 20 mm nominal size derived from
natural sources)
19 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 17.350 Cum 0.00
15° landings, alconies, shelves, chajjas, lintels,bands, plain window sills, staircases and
spiral stair cases above plinth level up to floor five level, excluding the cost of centering,
shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III)
derived from natural sources : 3 graded stone aggregate20 mm nominal size derived
from natural sources).
20 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 40.800 Sqm 0.00
cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone
aggregate 20mm nominal size derived from natural sources).
21 Brick work with common brunt clay F.P.S. (non modular) bricks of class designation 7.5 22.550 Cum 0.00
in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

22 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class 528.160 Sqm 0.00
designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand)
23 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by 310.400 Sqm 0.00
the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,
of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick
cement mortar 1:4 (1 cement 4 coarse sand) jointing with grey cement slurry @3.3
kg/sqm including grouting the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done
with the notch trowel, plier, wedge, clips of required thickness, leveling system and
rubber mallet for placing the tiles gently and easily.
Glazed Vitrified Floor Tiles polished finish of Size of Tile 600x600 mm

24 Providing Antiskid Tiles of approved quality, Size, shape and thickness not less than 30.810 Sqm 0.00
8mm on floor, skriting over a cement morter bed of 15mm thickness 1:3 (1 cement : 3
course sand) approved make fixed with Fix-A-Tie (Chokesy/Sika/Pedelite/Rouf)/ white
cement complete at all level as specified & directed. Vitrified Executive range-2
(Size 600mmx600mm and above) Nitco Made Imperia Series-
Gres Tiles
25 Providing and laying Vitrified tiles in different sizes (thickness to be specified by 23.690 Sqm 0.00
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of
approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick
bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @
3.3 kg/sqm including grouting the joint with white cement & matching pigments etc.
complete. Size of Tile 800x800 mm.

26 Providing polished vitrified wall tiles of approved quality, size, shape and thickness not 99.780 Sqm 0.00
less than 8mm on walls and skirting over cement morter bed of 10mm thick in prop. 1:3
(1 Cement : 3 Course sand) including cutting where necessary finished and flush
pointing with Fix-A-Tie (Choksey/Sika/Pedelite/ Rouf)/white cement slurry mixed with
approved pigment to match shade of tilesc complete at all levels as specified and
directed. (Coloured pigment should be in conformity with colour of tiles and as approved
and directed by the department). of size 300mmx600mm and above.

27 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and 3.600 Sqm 0.00
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and
similar locations of required size, approved shade, colour and texture laid over 20 mm
thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite stone slab of colour black Cherry/Rubby Red Area of slab over 0.50
sqm

28 Extra for providing opening of required size & shape for wash basin/kitchen sink in 2.000 Nos. 0.00
kitchen platform,vanity ounter and similar location in marble/ Granite/ stone work,
including necessary holes for pillar taps etc. cludingmoulding, rubbing and polishing of
cut edges etc.complete.
29 Providing wood work in frames of doors, windows, clerestory windows and other 1.050 Cum 0.00
frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners
of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

30 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) 3.150 Sqm 0.00
decorative type, core of block board construction with frame of 1st class hard wood and
well matched teak 3 ply veneering with vertical grains or cross bands and face veneers
on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws
31 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) 19.850 Sqm 0.00
decorative type, core of block board construction with frame of 1st class hard wood and
well matched teak 3 ply veneering with vertical grains or cross bands and face veneers
on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws
32 Providing and fixing factory made PVC Door shutter made of solid foam PVC profiles of 15.120 Sqm 0.00
thickness 5 mm and 15 mm at edges integrally extruded for vertical style and horizontal
(top / bottom / lock) rails of minimum cross section of 70mm x 28mm, of shape and
design as per manufacturer's specifications having homogenous fine cellular structure
and smooth integral outer skin, inserted with G.l. 'C' section/ rectangular tube profile of
minimum 0.30 mm thickness with 120 gsm coating as stiffeners as per manufacturer's
specifications Mitered cut joints for styles and rails provided with telescopic polymeric L'
corners are joined together using solvent adhesive and strengthened with fully threaded
stainless steel screws (of required size) through reinforcement stiffener with paneling of
specified solid foam PVC board / high pressure laminate of required thickness and of
approved design and shade (matching the styles and rails), secured within styles and
rails with specially designed solid foam PVC moulded headings of required size using
PVC solvent adhesive / cement. The finished door shutter including SS hardware, 1 no.
SS sliding door bolt 200 x 10mm, 1 no. SS tower bolt 200 x 10mm and 2 nos. SS
handles 125 mm, shall be fixed to frame with 3 Nos. stainless steel hinges of minimum
size 100x58x1.9mm and stainless steel screws of required size complete as per
direction of the Engineer-in-Charge.(Cost of above hardware is inclusive in rates)
5 mm thick solid foam PVC panel of required size with moulded/extruded beading of
appropriate design shape and size as per manufacturer's specifications (to secure the
panel insert tight in place within the style and rails of the shutter)matching the color
&shade of shutter frame - Non decorative type.

33 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 38.120 Sqm 0.00

34 Providing and fixing factory made door frame (single rebate) made out of solid foam 38.000 Rm 0.00
PVC extruded profile of minimum 60 mm width and minimum 30 mm thickness, having
homogenous fine cellular structure and integral smooth outer skin. The frame's vertical
and horizontal members to be mitered cut and joined together with PVC solvent
adhesive / cement and both corners strengthened with fully threaded steel screws (of
required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 Nos.
SS 304 grade minimum 8 mm dia CSK Phillips stainless steel self tapping
screws/fasteners with PA6 grade polyamide sleeves both of required size, and gap if
any between the door frame and the jamb must be filled with clear silicon, complete as
per direction of the Engineer-in- Charge.

35 Providing 40x5 mm flat iron hold fast 40 cm long including fixing toframe with 10 mm 72.000 Nos. 0.00
diameter bolts, nuts and wooden plugs and embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
nominal size).
36 Providing barge board of size 200mmx20mm with Ist class local Hollock/Bonsum timber 75.662 Rm 0.00
including fitting and fixing with necessary wood screws etc. complete.
37 Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators 7.380 Sqm 0.00
of standered sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/other
equivvalent primary producer) without horzontal glazing bars, joints mitred and welded
(manufactured to relevant IS specifications) and providing and fixing handels, angle
cleat, rubber gusket, roller, bolting device, locking arrangements, serews etc as
required complete as specified and directed for all levels. 2 Track sliding Windows
5 mm frosted glass

38 Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators 26.100 Sqm 0.00
of standered sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/other
equivvalent primary producer) without horzontal glazing bars, joints mitred and welded
(manufactured to relevant IS specifications) and providing and fixing handels, angle
cleat, rubber gusket, roller, bolting device, locking arrangements, serews etc as
required complete as specified and directed for all levels. 3 Track sliding window 5
mm coloured glass

39 Supplying , fitting & fixing anodised aluminium decorated grill with anodised aluminium 33.480 Sqm 0.00
rectangular frame of "F" and "H" section fitted with walls, columns or stiffeneres by
special type of screws as per specification by the department for all levels. (Aluminium
Alloy procured from primary aluminium producer (on submission of certificate of alloy
purchaging from primary producer)
40 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced 228.500 Sqm 0.00
Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and
patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to
0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light
reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-
locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized
@ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32
mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary
intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size
600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing
@ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm
dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size
85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length
3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at
450 mm center to center and 40 mm long dry wall wood screws. The work shall be
carried out as per specifications, drawing and as per directions of the Engineer-in-
Charge. With fully perforated 12 mm thick micro
tegular edged or 10 mm thick square edged GRG false ceiling tiles.

41 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape 20.000 Nos 0.00
with hooked ends in R.C.C. slabs or beams during laying, including painting the
exposed portion of loop, all as per standard design
complete.
42 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal 110.000 Rm 0.00
stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,
i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in
Charge. :Concealed work, including cutting chases and making good the walls etc.
20 mm nominal outer dia .Pipes.
43 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal 10.000 Rm 0.00
stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,
i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in
Charge. :Concealed work, including cutting chases and making good the walls etc.
25 mm nominal outer dia .Pipes.

44 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal 71.840 Rm 0.00
stability for hot & cold water supply including all CPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,
refilling & testing of joints complete as per direction of Engineer in Charge.
32 mm nominal outer dia. Pipes.

45 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal 81.290 Rm 0.00
stability for hot & cold water supply including all CPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,
refilling & testing of joints complete as per direction of Engineer in Charge.
50 mm nominal outer dia. Pipes.

46 Supplying fitting and fixing C.P.Bib cock 15mm dia of approved brand as directed and 7.000 Nos 0.00
spoecified (G.I & C.P pipes will be measured seperately).
Jaquare make Continental/Clarion 2- way bib-cock.
47 Supplying fitting and fixing Chrome Plated (C.P) Sink cock of approved brand as 1.000 Nos. 0.00
directed and spoecified (G.I & C.P pipes will be measured seperately).
Jaquare make Continental/Clarion Sink cock with swinging spout.
48 Supplying fitting and fixing chrome plated (C.P) stop cock of approved brand and size 24.000 Nos 0.00
as mentioned below as directed and spoecified (G.I & C.P pipes will be measured
seperately).
Jaquare make Continental/Clarion 15mm dia (Angular stop cock with long tread)

49 Supplying fitting and fixing chrome plated (C.P) stop cock of approved brand and size 7.000 Nos 0.00
as mentioned below as directed and spoecified (G.I & C.P pipes will be measured
seperately). Jaquare make Continental/Clarion 15 mm dia.
(Concealed stop cock extra heavy with adjustable wall flange.

50 Supplying fitting and fixing CP Pillar cock of 15mm dia of approved brand as specified 8.000 Nos 0.00
and directed. Jaquare make Continental

51 Supplying fitting and fixing Chrome Plated (C.P) spray shower 15mm dia of approved 7.000 Nos 0.00
brand as directed and specified. (Pipes will be measured and paid seperately)
Jaquar make Continental
Shower Arm 190mm long heavey casted body with wall flange

52 Supplying, fitting and fixing Chrome Plated (C.P) wall mixer complete as directed. 7.000 Nos 0.00
Jaquar make Continental/Clarion Wall mixer non telephonioc shower arrangement
only Cat No.219

53 Providing, fitting and fixing Chrome Plated waste coupling complete as directed and 9.000 Nos 0.00
specified.
Jaquar Make 32 mm (HT/FT) (CAT No. ALD-705/709)
54 Providing, fitting & fixing of 450 mm long Braided Hose (C.P. Connection pipe) with two 23.000 Nos 0.00
Nos 15 mm nuts & rubber washer without nipple suitable for Geysers of approved brand
and manufacture complete. a) Jaguar Make (Premium quality) Code
No. ALD-805B
55 Providing, fitting and fixing C.P. Brass Hand Shower (Health Faucet Metallic) including 7.000 Nos 0.00
8mm dia 1.20M long flexible tube wall hook etc. of approved brand and manufacture
confirming to IS standered complete as directed and specified.
56 Providing fitting & fixing decorative mirror complete as directed & specified. 7.000 Nos 0.00
Jaquar Make Swival mirror (Cat. No.ACN-1195N)
57 Providing fitting & fixing Glass shelf complete as directed & specified. Glass shelf 7.000 Nos 0.00
with C.P. guard rail Jaquar Make Continental 550mm long (Cat. No.ACN-1171N)

58 Providing and fixing white vitreous china pedestal type water closet (European type) 7.000 Nos 0.00
with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend
with fittings & C.I. brackets,40 mm flush end, overflow arrangement with specials of
standard make and mosquito proof coupling of approved municipal design complete,
including painting of fittings and brackets, cutting and making good the walls and floors
wherever required W.C. pan with ISI marked white solid plastic seat
and lid.
59 Providing vitreous China wash basin with CI/MS brackets, CP brass chain with plug, 8.000 Nos 0.00
PVC waste pipe including painting of fittings & brackets, cutting and making good the
walls whereever required. (Piller cocks, waste cupling are to paid seperately).
Pedestal Basin (with pedstal) Jaqure make White Opal (Cat. No.OPS-WHT-
0610)

60 Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS 1.000 Nos 0.00
brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including
painting the fittings, & making good the walls whereever required. (Sink cock, stop
cock, waste coupling are to be paid seperately)
Nirali Grace Plain Jumbo (Bowl Size 610x460x254) Glossy.
61 Providing fitting & fixing white vitreous glazed drain board of Hindware make size 1.000 Nos 0.00
(530x450) of Hindware (Cat.No.51001) including painting of brackests complete.
Size (530 x 450) of Hindware (Cat No. 51001)
62 Providing fitting & fixing Mirror with plastic frame of size 500 x 400 mm complete as 8.000 Nos 0.00
directed and specified.
63 Providing fitting & fixing CP soap tray / soap dish complete as directed & specified. 8.000 Nos 0.00
Jaquar Make Continental (Cat.ACN-1331N)

64 Providing fitting & fixing Liquid soap dispenser and liquid soap container complete as 8.000 Nos 0.00
directed & specified.
Jaquar Make Continental (Cat.No.ACN - 1135N) (With glass bottle)
65 Providing fitting & fixing CP Towel Rail complete as directed and specified. 8.000 Nos 0.00
Jaquar Make Continental 300mm for wash basin (Cat.No.ACN - 1101N).

66 Providing fitting & fixing CP Towel Rail complete as directed and specified. 7.000 Nos 0.00
Jaquar Make Continental 600mm (Cat.No.ACN - 1111N).
67 Providing fitting & fixing Chrome Plated Towel Ring complete as directed and specified. 8.000 Nos 0.00
Jaquar Make Continental towel ring round (Cat.No.ACN - 1121BN).

68 Providing fitting & fixing Chrome Plated TOILET PAPER holder complete as directed 7.000 Nos 0.00
and specified.
Jaquar Make Continental toilet paper holer with flap (Cat.No.ACN - 1153N).
69 Providing fitting & fixing Chrome Plated Tumber & Bruss holder of Parryware make 7.000 Nos 0.00
(Cat. No.9947) complete as directed and specified.

70 Providing fitting & fixing PVC pipes of 6kg/cm2 (Supreme/Prince) or other ISI approved 14.000 Nos 0.00
inmcluding jointing, fitting and fixing with clamps etc. as necessary complete at all levels
including below GL as directed and specified. In exposed surfaces or in
trenches. 110 mm dia
71 Providing fitting & fixing PVC pipes of 6kg/cm2 (Supreme/Prince) or other ISI approved 9.000 Nos. 0.00
inmcluding jointing, fitting and fixing with clamps etc. as necessary complete at all levels
including below GL as directed and specified. In exposed surfaces or in
trenches. 75 mm dia
72 Supplying fitting & fixing 45 degree PVC bend of (Supreme/Prince) or orther ISI 21.000 Nos 0.00
approved including jointing, fitting and fixing etc. as necessary complete at all levels
including below G.L. as directed and specified. In exposed surface or in trenches
110 mm dia.
73 Supplying fitting & fixing 45 degree PVC bend of (Supreme/Prince) or orther ISI 48.000 Nos 0.00
approved including jointing, fitting and fixing etc. as necessary complete at all levels
including below G.L. as directed and specified. In exposed surface or in trenches
75 mm dia.
74 Supplying fitting & fixing PVC plain single Tee with door of (Supreme/Prince) or orther 7.000 Nos 0.00
ISI approved including jointing, fitting and fixing etc. as necessary complete at all levels
including below G.L. as directed and specified. In exposed surface or in
trenches 110 mm dia.
75 Supplying fitting & fixing PVC socket plug of (Supreme/Prince) or orther ISI approved 21.000 Nos 0.00
including jointing, fitting and fixing etc. in exposed surface or trences as necessary
complete at all levels including below G.L. as directed and specified.
110 mm dia.
76 Supplying fitting & fixing PVC socket plug of (Supreme/Prince) or orther ISI approved 48.000 Nos 0.00
including jointing, fitting and fixing etc. in exposed surface or trences as necessary
complete at all levels including below G.L. as directed and specified. 75
mm dia.
77 Supplying fitting & fixing PVC cowl of ISI mark complete as directed and specified. 7.000 Nos 0.00
110 mm dia.
78 C.P.Grating 110mm dia 7.000 Nos 0.00
79 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 10.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished).. Sliding door bolts 300mm x 16mm.

80 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 4.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished) Tower Bolt 300mmx10mm

81 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 19.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished) Tower Bolt 250mm x 10mm

82 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 2.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished) Door Handles 150mm
83 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 34.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished) Door Handles 100mm

84 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 10.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished) Night latches Mortice night latches (Godrei make)

85 Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from 10.000 Nos 0.00
sharp edges and conners, flaws and other defects and with counter shunk holes for
screws including necessary C.P.Brass screws etc. complete (Bright natural matt & satin
finished) Mortice lock Cylindrical type (Godrej) polished Brass

86 Providing fitting & fixing Door Closer of various type UL listed and fire rated good quality 11.000 Nos 0.00
depending on the door specification. Types like Single Speed, Double Speed, Heavy
duty etc. are available and as directed & specified by the department Godrej
Double speed Door Closer (size 140mm x 39mm x 60mm) Model Number C 752

87 Supplying fitting & fixing drapery rods along with all accessories in doors windows and 20.000 Rm 0.00
other openings completed as specified and directed by the department at alllevels.
Mettalic Drapery rod
88 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) 519.920 Sqm 0.00
89 15 mm cement plaster on the rough side of single or half brick wall of mix : 529.560 Sqm 0.00
1:4 (1 cement: 5 fine sand)
90 12 mm cement plaster finished with a floating coat of neat cement of mix : 25.520 Sqm 0.00
1:4 (1 cement: 4 fine sand)
91 Removing white or colour wash by scrapping and sand papering and preparing the 1046.780 Sqm 0.00
surface smooth including necessary repairs to scratches etc. complete
92 Providing and applying white cement based putty of average thickness 1 mm, of 1046.780 Sqm 0.00
approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth complete.

93 Applying priming coats with primer of approved brand and manufacture, having low 1078.870 Sqm 0.00
VOC (Volatile Organic Compound ) content. With water thinnable cement primer on
wall surface having VOC content less than 50 grams/litre
94 Finishing walls with Acrylic Smooth exterior paint of required shade 284.190 Sqm 0.00
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat
of exterior primer applied @ 2.20 kg/10 sqm)
95 Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile 1087.870 Sqm 0.00
Organic Compound ) content less than 50 grams/ litre of approved brand and
manufacture, including applying additional coats wherever required to achieve even
shade and colour.
Two Coats.
96 Applying priming coat: 114.720 Sqm 0.00
With ready mixed aluminium primer of approved brand and manufacture on resinous
wood and plywood.
97 Painting with synthetic enamel paint of approved brand and manufacture to give an 114.720 Sqm 0.00
even shade :
Two or more coats on new work
98 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture 9.650 Sqm 0.00
to give an even shade: Two or more coats on new work.
99 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse 36.960 Sqm 0.00
sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal
size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm
nominal size, well rammed and consolidated and grouted with fine sand, including
necessary excavation,levelling & dressing & finishing the top smooth.

100 Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick 76.310 Rm 0.00
flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating
coat of neat cement slurry as directed with necessary shuttering for sides and earth
work in excavation of foundation trencehs and refilling the sides afetr completing of
work etc. as specified.
300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of
100mm.
101 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 1.000 Nos 0.00
shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per
standard design.
a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

102 Constructing brick masonry chamber for underground C.I. inspection chamber and 6.000 Nos 0.00
bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame
(light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not
less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with
1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size),
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3
coarse sand), finished smooth with a floating coat of neat cement on walls and bed
concrete etc. complete as per standard design:
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

103 Structural steel work riveted, bolted or welded in built up sections, trusses and framed 5670.000 Kg 0.00
work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
104 Providing Pre-Painted Galvanished Iron Sheet Roofing (PPGI) at all levels including 596.370 Sqm 0.00
fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlines
etc. to be measured and paid separately) TATA Blue scope/Dyna roof/Wonder roof or
equivalent as directed by the Department.
a) 0.45 mm thick.
105 Providing Pre-Painted Galvanished Iron Sheet Roofing (PPGI) accessories 270.400 Rm 0.00
(Ridges/Vally/Gutter/Flashing) at all levels including fitting and fixing with self drilling,
self tapping screws complete. TATA Blue scope/Dynaroof/Wonder roof or equivalent as
directed by the Department.
v) 0.45 mm thick.
106 Providing fitting & fixing wind ties with 40mmx6mm M.S flat iron and necessary 10mm 76.850 Rm 0.00
dia G.I. hook bolt, G.I flat washer and bitumen washer etc. complete including two coats
painting with red oxide anticorrosiv paint.
107 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS 83.000 Point 0.00
PVC insulated copper conductor single core cable in surface / recessed steel conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
108 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor 950.000 Metre 0.00
single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS
PVC insulated copper conductor single core cable for loop earthing as required.
109 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 150.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

110 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 10.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
111 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 10.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 2 X 10 sq. mm + 1 X 10 sq. mm earth wire
112 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 10.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 2 X 16 sq. mm + 1 X 16 sq. mm earth wire
113 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 10.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
114 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 50.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 4 X 10 sq. mm + 2 X 10 sq. mm earth wire
115 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS 10.000 Metre 0.00
PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required 4 X 16 sq. mm + 2 X 16 sq. mm earth wire
116 Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper 25.000 Metre 0.00
conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC
conduit as required. 1 Pair
117 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor 150.000 Metre 0.00
PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in
the existing surface/ recessed steel/ PVC conduit as required.

118 Supplying and fixing of following sizes of steel conduit along with accessories in 10.000 Metre 0.00
surface/recess including painting in case of surface conduit, or cutting the wall and
making good the same in case of recessed conduit as required. 20 mm

119 Supplying and fixing of following sizes of steel conduit along with accessories in 50.000 Metre 0.00
surface/recess including painting in case of surface conduit, or cutting the wall and
making good the same in case of recessed conduit as required 25 mm

120 Supplying and fixing of following sizes of medium class PVC conduit along with 25.000 Metre 0.00
accessories in surface/recess including cutting the wall and making good the same in
case of recessed conduit as required. 20 mm
121 Supplying and fixing of following sizes of medium class PVC conduit along with 25.000 Metre 0.00
accessories in surface/recess including cutting the wall and making good the same in
case of recessed conduit as required. 25 mm
122 Supplying and fixing following modular switch/ socket on the existing modular plate & 31.000 Each 0.00
switch box including connections but excluding modular plate etc. as required. 5/6
amps switch
123 Supplying and fixing following modular switch/ socket on the existing modular plate & 1.000 Each 0.00
switch box including connections but excluding modular plate etc. as required. 2 way
5/6 amps switch
124 Supplying and fixing following modular switch/ socket on the existing modular plate & 2.000 Each 0.00
switch box including connections but excluding modular plate etc. as required. 15/16
amp switch
125 Supplying and fixing following modular switch/ socket on the existing modular plate & 31.000 Each 0.00
switch box including connections but excluding modular plate etc. as required. 3 pin
5/6 amp socket outlet
126 Supplying and fixing following modular switch/ socket on the existing modular plate & 2.000 Each 0.00
switch box including connections but excluding modular plate etc. as required. 6
pin 15/16 amp socket outlet
127 Supplying and fixing following modular switch/ socket on the existing modular plate & 1.000 Each 0.00
switch box including connections but excluding modular plate etc. as required.
Telephone socket outlet
128 Supplying and fixing following modular switch/ socket on the existing modular plate & 5.000 Each 0.00
switch box including connections but excluding modular plate etc. as required. TV
antenna socket outlet
129 Supplying and fixing following modular switch/ socket on the existing modular plate & 1.000 Each 0.00
switch box including connections but excluding modular plate etc. as required.
Bell push
130 Supplying and fixing stepped type electronic fan regulator on the existing modular plate 14.000 Each 0.00
switch box including connections but excluding modular plate etc. as required.

131 Supplying and fixing modular blanking plate on the existing modular plate & switch box 25.000 Each 0.00
excluding modular plate as required.
132 Supplying and fixing following size/ modules, GI box alongwith modular base & cover 5.000 Each 0.00
plate for modular switches in recess etc as required. 1 or 2 Module
(75mmX75mm)
133 Supplying and fixing following size/ modules, GI box alongwith modular base & cover 45.000 Each 0.00
plate for modular switches in recess etc as required. 3 Module
(100mmX75mm)
134 Supplying and fixing following size/ modules, GI box alongwith modular base & cover 5.000 Each 0.00
plate for modular switches in recess etc as required. 4 Module
(125mmX75mm)
135 Supplying and fixing following size/ modules, GI box alongwith modular base & cover 10.000 Each 0.00
plate for modular switches in recess etc as required. 6 Module
(200mmX75mm)
136 Supplying and fixing following size/ modules, GI box alongwith modular base & cover 1.000 Each 0.00
plate for modular switches in recess etc as required. 8 Module
(125mmX125mm)
137 Supplying and fixing following size/ modules, GI box alongwith modular base & cover 1.000 Each 0.00
plate for modular switches in recess etc as required. 12 Module
(200mmX150mm)
138 Supplying and fixing suitable size GI box with modular plate and cover in front on 1.000 Each 0.00
surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular
socket outlet and 15/16 amps modular switch, connection etc. as required.

139 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden 8.000 Each 0.00
block including connection etc as required.
140 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as 1.000 Each 0.00
required.
141 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact 61.000 Each 0.00
fluorescent fitting of all types, complete with all accessories and tube etc. directly on
ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor,
single core cable and earthing etc. as required.
142 Installation, testing and commissioning of ceiling fan, including wiring the down rods of 14.000 Each 0.00
standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,
single core cable, including providing and fixing phenolic laminated sheet cover on the
fan box etc. as required.
143 Installation of exhaust fan in the existing opening, including making good the damage, 8.000 Each 0.00
connection, testing, commissioning etc. as required. Upto 450 mm
sweep
144 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. 8.000 Each 0.00

145 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface 16.000 Each 0.00
or in recess including providing and fixing 25 A modular socket outlet and 25 A modular
SP MCB, "C" curve including connections, painting etc. as required.

146 Providing and fixing following rating and breaking capacity MCCB in existing cubicle 1.000 Each 0.00
panel board including drilling holes in cubicle panel, making connections, etc. as
required. 100 Amp, 30 KA MCCB
147 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, 2.000 Each 0.00
MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18),
Double door
148 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 2.000 Each 0.00
volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted,
inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for
mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type
MCB TPDB is normally used where 3 phase outlets are required.) 8 way
(4 + 24), Double door
149 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature 36.000 Each 0.00
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required. Single
pole
150 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature 1.000 Each 0.00
circuit breaker suitable for inductive load of following poles in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Double pole
151 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, 2.000 Each 0.00
residual current circuit breaker (RCCB), having a sensitivity current upto 300
milliamperes in the existing MCB DB complete with connections, testing and
commissioning etc. as required. 40 amps
152 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 1.000 Each 0.00
240 volts "C" curve DP MCB complete with connections, testing and commissioning etc.
as required.
153 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, 1.000 Each 0.00
at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in
single red colour on front side as required.
154 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, 3.000 Set 0.00
and providing masonry enclosure with cover plate having locking arrangement and
watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

155 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including 1.000 Set 0.00
accessories, and providing masonry enclosure with cover plate having locking
arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as
required.
156 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip 20.000 Metre 0.00
earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as
required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt &
spring washer spaced at 50mm)
157 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth 50.000 Metre 0.00
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as
required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring
washer spaced at 50mm)
158 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along 25.000 Metre 0.00
with existing surface/ recessed conduit/ submain wiring/ cable as required.

159 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, GI 1.000 Each 0.00
tube, having single prong at top, with 85 mm dia 6 mm thick GI base plate including
holes etc. complete as required.
160 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for 100.000 Metre 0.00
lightning conductor complete as required.(For horizontal run)
161 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for 25.000 Metre 0.00
lightning conductor complete as required.(For vertical run)
162 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as 125.000 Each 0.00
required.
163 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable 15.000 Metre 0.00
of 1.1 KV grade of following size in existing RCC / HUME / METAL pipe as required.
Upto 35 sq. mm
164 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable 50.000 Metre 0.00
of 1.1 KV grade of following size in existing RCC / HUME / METAL pipe as required.
Above 35 sqmm and upto 95 sq. mm

165 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable 10.000 Metre 0.00
of 1.1 KV grade of following size on wall surface as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
166 Supplying and making end termination with brass compression gland and aluminium 4.000 Each 0.00
lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV grade as required. 3.5 X 50 sq. mm (35mm)

167 Supplying and making end termination with brass compression gland and aluminium 2.000 Each 0.00
lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor
cable of 1.1 KV grade as required. 4 X 35 sq. mm (32mm)

168 Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked 2.000 NOS 0.00
(IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double /
three / four poles in the existing MCB DB or in existing MS enclosure complete in all
respects. 40 Amp. FP MCB
169 Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked 2.000 NOS 0.00
(IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double /
three / four poles in the existing MCB DB or in existing MS enclosure complete in all
respects. 40 Amp. TP MCB
 170 Design, manufacture, supply, testing , installation and commissioning of Panel 1.000 SET 0.00
fabricated out of 14 SWG CRCA sheet steel, IP 42, wall / floor mounting type. The
sheet steel shall undergo minimum 9 tank treatment followed by finishing powder
coating of min 60 micron thickness. the board includes 415 V electrolitic Aluminium
Bus Bar, removable gland plates, cable glands, including connection with outgoing
feeders complete in all respect. The incoming MCCB shall be
microprocessor based with inbuilt O/L & S/C release with inbuilt E/F protection and all
Outgoings MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release.
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with
adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with
solid isolable neutral link. The breaking capacity specified is Ics value. All outgoing
MCB's shall be C type with 15 KA breaking capacity. Mix & Match
famlies / makes of MCCB's / MCB's shall not be allowed, They are all of same
manufacturer. The fault withstanding capacity of
panel shall be 15 KA rms for 1 sec. The above board
shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter,
Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter
connections by min. 2.5 sq.mm. Copper wires. INCOMER-1 : 125 AMP FP
MCCB (25 KA) INCOMER-2 : 125 AMP FP MCCB (25 KA) BUS BAR
: 200 AMP, 500 Volts, 3 phase 50 HZ FP (100 % neutral) high conductivity electrolytic
Aluminium bus bar with conductivity of min 57 to 58% of suitable length, insulated by
heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm /
amp. The Maximum allowable temperature for the Bus bar to be
restricted to 85 deg C. The temperature rise should be restricted to 35 deg C above
ambient temperature. OUT GOINGS : 2 No100
AMP TP MCCB (25 KA) 1 No 63 AMP FP MCB (15 KA) 2 No 40 AMP FP
MCB (15 KA)

171 Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, 25.000 Metre 0.00
armoured, served, sheathed 1100 volts grade. 4 x 35 Sqmm

172 Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, 35.000 Metre 0.00
armoured, served, sheathed 1100 volts grade. 3.5 x 50 Sqmm

173 Supply of Ceiling Fan 14.000 No. 0.00

174 Supply of Exhaust Fan 8.000 No. 0.00

Total in Figures 0.00

Quoted Rate in Words INR Zero Only