OWNER’S MANUAL

WARNING
For safety reasons, please read the manual first before plugging in machine.
Please keep this manual properly for convenient reference as needed.
About This Manual
Thank you for purchasing this product.

The manual describes how to install, set up, use and maintain the product.
The main purpose of the manual is to instruct how to operate the product
correctly and safely. Please follow all the safety and warning instructions in
the manual to avoid personal injury and product damage.

This product may only be maintained by a technician. A technician mainly

refers to a person who has obtained a certificate of senior middle school
related to mechanical engineering, electrical engineering or at a level equal
to that of technical senior middle school graduates, and is engaged routinely
in the maintenance, management, repair of amusement machine.

Please keep this manual properly for easy reference as needed. Moreover,
if the operator entrust another party to operate, move, transport, install,
maintain and repair the machine, please read relevant content and instruct
concerned party to observe all the instructions and precautions in this manual
regarding the particular action to be taken.

When transferring the ownership of this product, be sure to provide this

manual with the machine.

For further information about the game and repair (including consumables),
please contact our company.

© GuangZhou Wahlap Technology Limited All Rights Reserved.

Unauthorized reproduction of this document or any of its contents in

any form is strictly forbidden.
Table of Contents
About This Manual
1. Safety Precautions ...............................................1
1.1 Warning Stickers .........................................................1
1.2 Placing Site .............................................................1
1.3 Safety Precautions ........................................................2
1.4 Precaution during Play .....................................................3
1.5 Transporting and Moving ..................................................3
1.6 Installing and Placing .....................................................4
1.7 Caution & Warning Stickers ................................................5
2. Product Introduction ..............................................6
2.1 Product Specification ......................................................6
2.2 Overview ...............................................................7
2.3 Spare Parts ..............................................................8
2.4 Shipment List ............................................................9
2.5 Packing List ............................................................11
2.6 Install Direction .........................................................12
2.7 Warranty ..............................................................15
3. Game Description ...............................................16
3.1 Appearance Design.......................................................16
3.2 Game Introduction .......................................................16
3.3 How to Play.............................................................16
3.4 Connection and turning on the power .......................................17
3.5 Setting the group number and player ID......................................18
4. Test and Setting .................................................19
4.1 Distinctive plays .........................................................19
4.1.1 Game control ......................................................20
4.1.2 Game control ......................................................21
4.2 Framework of the menu ..................................................23
4.2.1 Using the operator settings............................................24
4.3 Hardware test............................................................25
4.3.1 Connection status ...................................................25
4.3.2 I/O test ............................................................26
4.3.3 Force feedback test .................................................27
4.3.4 Lamp test .........................................................28
4.3.5 Screen test.........................................................29
4.3.6 Speaker test .......................................................30
4.3.7 Vibration seat test ...................................................30
4.3.8 Keypad test ........................................................31
4.3.9 Counter test ........................................................31
4.4 Game settings ...........................................................32
4.4.1 I / O adjustment .....................................................33
 4.4.2 Country ...........................................................33
4.4.3 Store .............................................................34
4.4.4 Difficult setting .....................................................34
4.4.5 Tunnel setting .....................................................35
4.4.6 Coin settings ......................................................35
4.4.7 Multiplayer setting .................................................36
4.4.8 Volume setting ....................................................37
4.4.9 Flow time setting ...................................................38
4.4.10 Ranking board reset ...............................................38
4.5 System settings .........................................................39
4.5.1 Connection setting ..................................................39
4.5.2 Time setting .......................................................40
4.5.3 System reset ......................................................40
4.5.4 Player data setting ..................................................41
4.6 Income data ............................................................42
4.6.1 Daily income .......................................................43
4.6.2 Monthly income ....................................................44
4.6.3 Total income .......................................................45
4.6.4 Income data reset...................................................46
4.7 Troubleshooting ..........................................................47
5. Maintenance and Service .........................................48
5.1 Maintenance and Service ................................................48
5.2 Replacing parts ........................................................49
5.2.1 Replacing fl uorescent tube ...........................................49
5.2.2 Replacing the keypad / View button.....................................49
5.2.3 Replacing the boost button and the light plate ............................50
5.2.4 Replacing the side light plate ..........................................50
5.2.5 Replacing the exhaust light plate ......................................51
5.2.6 Replacing the brake light plate ........................................51
5.2.7 Replacing the vibration speaker under the seat ...........................52
5.2.8 Replacing the vibration speaker behind the seat ..........................52
5.2.9 Replacing the speaker behind the seat ..................................53
5.2.10 Replacing the bottom seat back light ..................................53
5.2.11 Replacing the dashboard LED light plate ...............................54
5.2.12 Replacing front speaker .............................................54
5.2.13 Replacing the pedals of the throttle and brake ..........................55
5.2.14 Replacing the VR of the steering wheel ................................55
5.2.15 Replacing the VR of the pedals of the throttle and brake...................56
5.2.16 Replacing the bass speaker .........................................56
5.2.17 Maintaining the E3100 ..............................................57
5.2.18 Maintaining the full-range AMP .......................................57
5.2.19 Replacing the power supply and isolation transformer.....................58
5.2.20 Replacing I / O board / motor control board .............................58
6. Assembly .......................................................59
6.1 Assembly tree diagram ....................................................59
6.2 Final host-machine assembly ...............................................60
6.3 Host-machine assembly....................................................61
6.3.1 Host-machine frame assembly .........................................63
6.3.2 Host machine assembly ..............................................64
6.3.3 Power pack assembly ................................................65
6.3.4 Power amplifier assembly .............................................66
6.3.5 I/O board assembly .................................................67
6.3.6 Coining frame assembly .............................................68
6.3.7 AC assembly-box ...................................................69
6.3.8 Back service-door assembly ..........................................70
6.3.9 Steering-wheel and lamp-plate assembly ................................71
6.3.10 Control panel assembly (Chinese version - card reader) ...................72
6.3.11 Control panel assembly (English version - digital buttons) .................73
6.3.12 Pedal assembly ....................................................74
6.3.13 High-pitched sound box assembly .....................................75
6.3.14 Motor assembly ....................................................76
6.3.15 Bass loudspeaker assembly .........................................77
6.3.16 Transformer assembly ..............................................78
6.3.17 Steering-wheel assembly.............................................79
6.4 Base assembly ..........................................................80
6.4.1 Base-frame assembly ................................................81
6.4.2 Lamp base-plate assembly ............................................82
6.4.3 Ransformer base-plate assembly .......................................83
6.4.4 Left-side exhaust-pipe assembly........................................84
6.4.5 Right-side exhaust-pipe assembly ......................................85
6.4.6 Fan assembly .......................................................86
6.5 Light box assembly........................................................87
6.5.1 Light-box frame assembly .............................................88
6.5.2 Light-box left-side assembly ...........................................89
6.5.3 Light-box right-side assembly ..........................................90
6.5.4 Card-board assembly ................................................91
6.6 Display assembly .........................................................92
6.7 Seat assembly ..........................................................93
6.7.1 Seat frame assembly .................................................94
6.7.2 Seat-cover assembly .................................................95
6.7.3 Seat-base assembly..................................................96
6.8 Display supportingg frame..................................................98
7. Printing Pattern ..................................................99
8. Wiring Diagram .................................................101
9. After-Sales Service..............................................104
1. Safety Precautions
1.1 Warning Stickers
In order to avoid injury to related people and damage to property, please
observe the followings:

PLEASE READ FIRST

The following marks can be used to indicate the magnitudes of risk and
damage caused by ignorance or improper operation:

Warning means “may result in serious injury or death”

means “may result in minor injury or property

Caution damage”

Serious Injury
Injury: refers to the situations in which hospital treatment or long-term treatment
will be accepted because of losing sight, getting hurt, getting burnt, electric
shock, fracture or intoxication.
Minor Injury
Injury: refers to the cases that there is no need to go to hospital or accept long-term
treatment.
Property Damage
Damage: refers to the damage of house, facility, or hurt of livestock and pet

1.2 Placing Site

Warning
This machine is designed for indoor use only. Never install the machine
outdoors. Meanwhile, please avoid the following locations indoor
Direct sunlight, water leakage, damp and high temperature places.
Near Flammable, volatile, or/and dangerous substance.
Slope, unstable places or locations subject to frequent vibration.
Near emergency exit, fire extinguisher or similar equipment.
The rear part has the vent for heat emission from PC or screen.
Don’t place anything nearby to avoid game failure.

Provide a space of minimum 30cm between the rear of the machine

and the wall for good ventilation and heat emission
1.3 Safety Precautions
The owner shall pay attention to the followings when placing, checking
and repairing machine to insure player’s security and avoid damage:

Warning
Make sure to plug the game into 110V or 220V main outlet to avoid fire
and electric shock.

Make sure to turn off the power when performing maintenance and
service to avoid electric shock or short circuit.

Do not unplug or plug the plug instantly.

Don’t touch the power plug with a wet hand to avoid electric shock.

Don’t expose the power cord/grounding line on the passageway.

Failure to do this will damage the power cord, causing electric shock
or short circuit.

Don’t lay anything near the power cord to avoid fire.

Do not pull the power cord when unplugging, please hold the plug to
avoid power cord damage, causing fire or electric shock.

In case of power cord damage, please contact the local distributor for
replacement

Only use fuse and spare parts specified by our company

Connect the connector firmly and tighten the screws.

Do not dismount, replace or convert the product without our permission

in order to avoid damage and human injury due to improper operation.

Check and maintain the machine regularly.

Keep “Warning stickers” clean and legible. Replace it immediately

when the words are not legible or the dirt can’t be removed.

Please contact our service center when performing any work that is
not described in this manual, and follow the instruction provided.
1.4 Precautions during Play
Caution
In order to avoid injury and accident during play, the following people shall
not play the game:
People who are injured or less mobile.
Person with poor health condition, such as hypertension or heart disease.
Person wearing high-heeled or slippery shoes.
Person who can’t touch the pedal.
Pregnant woman, drunk people.
When a player feels uncomfortable during play, remind the person to have
a break, or stop playing.
Make sure the player reads the warning labels and other indications, and
plays in accordance with the instructions to avoid accidents such as electric
shock and short circuit.
Bystander shall not operate any button when the player is playing the game
to avoid unnecessary trouble.

1.5 Transporting and Moving

Caution
Transporting
When transporting the machine with an elevator, be sure to employ “Lift Point”
to prevent accident and damage to the machine.
To prevent movement when transporting the machine on a vehicle, please fix the
casters and fully retract the adjusters. Failure to do this may cause damage to the
machine.
When carrying the machine with a forklift, be sure to insert the fork to fork position
and lift stably. If not, it may cause accident and damage to the machine.
The glass and LCD screen are fragile. Avoid violent vibration or shock when
transporting.
Moving
Before moving the machine, unplug the power plug to prevent accident.
Don’t damage the cord.
Pay attention to the obstructions and uneven surface when moving the machine
to prevent accident and damage to the machine.
Fully retract all adjusters before moving to prevent accident and hazard.
Make sure to use at least two persons to conduct the above work to avoid accident
and injury
Pay attention to the moving direction, see fig.
1.6 Installing and Placing
Pay attention to the following when placing the machine.

Caution
Place the machine on the flat and slip resistant area.
Use the adjusters to fix the machine (See diagram 1)
1.Loosen the nuts for the adjusters (clockwise), tighten the bolts with a wrench (clockwise).
2.Tighten the nut firmly(counter clockwise) and fix it well.

bracket

Lock nut

Lock place

Caster Adjuster Bolt

Diagram (1)

Provide a space of minimum 30cm between the rear of the machine and
the wall for good ventilation and heat emission (See diagram 2).

Wall

Diagram (2)
1.7 Caution & Warning Stickers
2. Product Description
2.1 Product Specification
Location Indoor Only
Dimension 1108(W)×1693(D)×2335(H)
Rated Voltage 220V
Frequency 50Hz
Power Consumption 750W
Weight 280kg
Temperature Range 5~40 C

1108mm
2335mm

1693mm

Front View Side View

6
2.2 Overview

Side View Rear View

Top View Bottom View

7
2.3 Spare Parts

Card-board components

Billboard acrylic
Right side of light box

Display

Steering wheel

Shifting fork

Seat Coining door

Accelerator and the brake

Host machine
4X exhaust pipes

Host- machine base

Light box
Light box

Display supporting frame

Back service-door

AC box

8
2.4 Shipment List
Packing Carton 1
7
1

6
1

2 1
1 1

5
1

4
1
3
1

7 HXK-9901E05 座椅天盖 耐水3C 1100g T-10 1

6 HXK-9901E04 座椅围框 耐水3C 1100g T-10 1
5 HXK-9901E03 座椅地台架限位木条二 实木40*20*767 1
4 HXK-9901E02 座椅地台架限位木条一 实木40*20*500 1
3 HXK-9901E01 座椅地台架 1
2 HXK-9903000 灯箱左右侧及豪卡板包装 1
1 HXK-0200000A 座椅组件 1
序号 图 号 名 称 材料/规格 数量 备注

9
Packing Carton 2

6
1

5
1

2
1

7
1

4
1
1
3 1
1

7 附属品纸箱 345*255*110mm 1
6 HXK-9902E05 机台主体天盖 耐水3C 1100g T-10 1
5 HXK-9902E04 机台主体围框 耐水3C 1100g T-10 1
4 HXK-9902E03 机台主体地台架限位木条二实木40*20*700 1
3 HXK-9902E02 机台主体地台架限位木条一实木40*20*1020 1
2 HXK-0100000A 机台主体组件 1
1 HXK-9902E01 机台主体地台架 1
序号 图 号 名 称 材料/规格 数量 备注

10
2.5 Packing List
Please check the following items after purchasing our product. If any part
missing or damaged, please contact our sales person!

Description Specification Quantity Remarks

Same-size key 5555 keys 2

Power line (3 pins at both ends ) 3m 1.0m ) 1

Flat gasket φ6*φ20*2.0 chrome-plated 6

Flat gasket φ5*φ12*1.0 black-plated 10

Large hexagon socket flat head screw M5*12 (chrome-plated) 20

Large cross-head flat screw M4*12 (black-plated 22

Hexagonal screw M8*50 black-plated 4

Flat gasket φ8*φ22*2.0 black-plated 4

Spring washer M8 black-plated 4

Hexagonal screw M6*25 black-plated 12

Flat gasket φ6*φ20*2.0 black-plated 12

Spring washer M6 black-plated) 12

Operating instructions Coated paper 1

Lateral junction plate of host

SPCC-3.0T 2
machine

Network cable gigabit network cable 10M 1

11
2.6 Install Direction
Step 1
1. First of all, the two pieces of reinforced-plastic sheet metals of exhaust-pipe are fixed to the base
with the large cross-head flat screws (black-plated .
2. After the right-side assembly of the exhaust pipe is fixed to the base with 3 large cross-head flat
screws M4 * 12 (black-plated), then the wires on the exhaust pipe are connected properly.
3. The right-side plastic of the exhaust pipe is fixed to the base with 5 flat-head screws M4 x 25
(black-plated).

Reinforced plastic sheet metal of exhaust-pipe

Right-side plastic of exhaust pipe

Right-side assembly of exhaust pipe

Step 2
1. After the display assembly is taken out of the packaging box, the display service panel and the
display cover-plate are removed respectively, then the display is removed to have the display
separated from the display supporting frame.
2. First of all, use the hexagonal screws M8 * 50 (black-plated), spring washers M8 (black-plated)
and flat gaskets φ8*φ22*2.0 (black-plated) to install the display supporting frame to the host machine;
Reuse the screws removed from the display to install the display to the display supporting frame.
3. After 4 screws on the back service-door are removed, use the same-size key to open the door in
order to have the connecting wires connected properly.

Display service-panel Display supporting

Display deck-plate frame Display

Host machine

Display back service-door

12
Step 3
1. First of all, hang the light-box framework onto the supporting frame and connect the wires on the
light-box framework properly, then use 8 cross-head round screws M5 * 16 (black-plated) to fix
the light-box framework to the display supporting frame.
2. Reinstalled the display deck-plate, display service-panel and back service door to its places.

Light-box framework

Step 4
1.When both sides of light box are installed, plug in the connectors at the left and right sides of light
box and put the connectors into the light box , and then use M5 * 12 (chrome-plated) to fix the
both sides to the light box.
2.After the left and right sides of the light box are fixed properly, put the card-board components
onto the host-machine and align the screw-holes, and then use M5 * 12 (chrome-plated)
hexagonal-socket flat head screws and flat gasketsφ6*φ20*2.0 to tighten.

Card board components

Right side of the light box

Light box

Left side of the light box

Display

13
3. Put the long holes on either side of billboard acrylic onto the studs on either side of the light box,
and then use M5 * 12 (chrome-plated) hexagonal-socket flat head screws to fix billboard acrylic
decorative sheets onto billboard acrylic.
Card board components

Billboard acrylic
Billboard acrylic Right side of the light box
decorative sheets

Step 5
1.First of all, connect the connecting wires between the host machines and seat properly and the
host-machine shall be near to the seat.
2.Remove 4 M4*25 (black-plated) hexagonal-socket flat head screws, unlock the seat, then put
the seat up, use the hexagonal flat head screws M8 * 50 (black-plated), flat gasket Φ8*φ22*2.0
(black-plated) and spring washer M8 (black-plated to connect the host-machine with the seat,
lock the seat and retighten the 4 removed hexagonal flat head screws.
3.Use hex screws M6 * 25 (black-plated), flat gaskets φ6*φ20*2.0 (black-plated) and spring washers
M6 (black-plated) to tighten the two pieces of junction plates at the outboard of the host machine.

14
2.7 Warranty
Scope

Inquiry regarding product can be assisted for free.

The warranty scope for consumables and durables may differ from product
to product. Please contact our after-sales service center for detailed
information. The right of final interpretation is reserved.

Exclusive

Damage caused by force majeure such as god will.

Failure caused by carelessness, such as water contact, falling down,
toppling, knocking.
Failure caused by disobeying the instructions in this manual.
Failure caused by operating the machine on inappropriate site.
Change the original design and configuration for the game without notice.
Failure to perform regular service and clean.
Failure to fix the product in line with the manual’s requirement.
Malfunction or part damage caused by electromagnetic interference other
electronic equipments generated.

Non-warranty Consumables

Light tube and bulb

Button lamp and switch
Fragile items
Solenoid
Other spare parts

15
3. Game Description
3.1 Appearance Design
The host-machine is used for racing game and its appearance design is very novel. Its main structure
is yellow & black and provided with the racing decorative board. Its sides are decorated with the
dynamic racing-car. Its side acrylic is provided with the blue eye-catching lamps. Its main structure
is provided with a variety of lamps and equipped with a vibration device. When the car collides
or use Turbo Jet, the obvious vibration shall be triggered in order to have the player feel the
joyfulness and the excitement of the game.

3.2 Game introduction

Overtake is a brand new recreational racing game, in which six popular vehicles are provided.
Each vehicle has distinctive features and various types of Turbo Jet. This game also offers
diverse track combinations, scenes, and remodel their vehicles in a unique way. The vehicle
frame is equipped with various types of lighting facilities and the vibration function, so when
vehicles are hit or Turbo Jet is used, significant vibration will be brought about to enhance the
speeding experience and better help players feel the intense atmosphere during the competition.

3.3 How to play

1. Use the traditional steering wheel + pedal operation mode and use the nitrogen and View keys
at the same time.
2. After inserting the coin and choosing the mode, car and track-line, press START button and
tread the accelerator to start the game. In the process of playing, use the same button to increase
the effect of different games (switching the viewpoint, accelerating and evading). The left corner
of picture is showing the current positions of the player & the rival and the track-line thumbnail.
The upper picture is showing the elapsed time of the game and player’s rank/number. The lower
right corner of the picture is showing the connecting state, playing time, nitrogen / speed /
tachometer /gear /level and coining information.

16
3.4 Connection and turning on the power
Connecting 2 cabinets
1. Use the key to open the maintenance door located in the back of the cabinet.
2. Plug in one side of the included Internet wire to the cabinet and the other side to the router(HUB).
3. In order to secure connection, do not connect two cabinets without connecting the internet wire to
the router(HUB).
4. To turn on the cabinet, plug in one side of the included AC cord to the socket labeled as (AC
power socket) in the back of the cabinet and the other side to the fused socket.

Connecting 4 cabinets
1. Use a key to open the maintenance door located in the back of the cabinet.
2. Plug in one side of the included Internet wire to the cabinet and the other side to the router(HUB).
3. In order to secure connection, do not connect two cabinets without connecting the internet wire to
the router(HUB).
4. To turn on the cabinet, plug in one side of the included AC cord to the socket labeled as (AC
power socket) in the back of the cabinet and the other side to the fused socket.

17
3.5 Setting the group number and player ID
In order to launch a multi-player mode (a maximum of 4 cabinets is allowed) , you must assign the
cabinets into the same group number but different player ID. If 4 cabinets are connected, then appoint
their player ID as 1P, 2P, 3P, 4P.
1. Under the standby mode, open the coin box, and press the TEST button to enter Operator settings
2. Enter Operator settings → system setting → Connection setting

3. Assign the cabinets into the same group but different player ID.
■ Example of setting up the connection of 2 cabinets(viewed from the front of the cabinets):

Cabinet(Left) Cabinet(Right)
Connection Setting Connection Setting

Group 01 Group 01
Player ID 01P Player ID 02P

■ Example of setting up the connection of 4 cabinets(viewed from the front of the cabinets):
Cabinet(Left) Cabinet(Right) Cabinet(Left) Cabinet(Right)
Connection Setting Connection Setting Connection Setting Connection Setting

Group 01 Group 01 Group 01 Group 01

Player ID 01P Player ID 02P Player ID 03P Player ID 04P

■ After completing all set-ups, you could enter Operator settings → Hardware test → Connection
status to test whether it is well connected or not. (Details refer to 4.3.1 Connection Status)

18
4. Test and Setting
4.1 Distinctive plays
■ Three game modes
Multi-player mode: a maximum of 4 players
is allowed.
Race mode: to challenge each round and
upgrade the vehicle.
Time trial: to challenge the best record on the
track.
■ Six fusion vehicles.
■ T h o u s a n d s o f mo d i f i c a t i o n combinations.
■ Be equ ipped wit h t he newest vibration chair
and force feedback system of the steering wheel.
■ Boost and Turbo Jet could enhance the vehicle´s
speed and reach its ultimate speed.
■ Total of 12 themed scenes including cities, roads,
Arctic, etc...
■ Random track combinations and events.

19
 4.1.1 Game control
Instructions of the Control buttons
Steering wheel
Control the car turning

Start / Boost button

Gear stick
Sequential gear stick to shift

View button
Change view

Throttle & brake

Control the car speed

Instructions of the game display

Time counter down Rank / Total racer Connection

status
Distance
line

Game time

Boost meter /
KPH /
RPM /
Players Gears /
position

Credits

Turbo jet counter Multiplayer status

20
4.1.2 Game control
Except the basic operations such as speeding and stepping on the brake, other operations
are as follows:

1
Press to con rm. This button can
also provide boost; when pressed twice,
Turbo Jet will be initiated.

2
Turning the steering wheel to the left or
right could make turns.

3
When the game is in process, press
to change view point.

21
4
When the game is in process, and
occurs, press the button to avoid event.

5
When the manual transmission is
selected, use the gear stick to change
gears.

6
When the game is in process,
press and at the same time
to end the game.
This function does not work under
multi-player mode

22
4.2 Framework of the menu

I / O test
Coin
Service
Hardware test Test
Connection status Start / Boost
I / O test View
Force feedback test Gear stick
Lamp test Steering wheel
Screen test Throttle
Speaker test Brake
Vibration seat test
Keypad test Lamp test
Counter test Side light
Operator settings RPM meter light
Hardware test
Game settings Speed meter light
Game settings Dashboard light
I / O adjustment
System settings View
Country
Income data Start / Boost
Store
Dif cult setting Boost meter light
Tunnel setting Upper seat back light
Coin setting Bottom seat back light
Multiplayer setting Exhaust light
Volume setting Brake light
Flow time setting
Ranking board reset
Easy
System setting Normal
Connection setting Hard
Time setting
System reset Coin setting
Player data setting Free play
Start game
Income data Continue game
Daily income
Monthly income Connection setting
Total income Group
Income data reset Player ID

23
4.2.1 Using the operator settings
Make sure the cabinet is turned on and the game is displayed on the screen.
1 Open the door of the coin box and press the TEST button to enter operator settings.
Then the screen will display as below:

Enter the menu and follow the instructions.

2 Use the gear up and gear down functions on the gear stick to move the cursor, and
the item where the cursor is pointed to will appear in red.
3 Use the Start button to confirm or enter the sub menu.
4 After setup or testing is completed, return to Operator settings and move the cursor
to Exit . Then press the Start button to return to the game.
Note: When warning message appear as Caution!! Process I/O adjustment Country
Store Connection setting, before exit operator settings.

24
4.3 Hardware test
You can enter Hardware test to test if all hardware is normally functioning or not.
1 Enter Operator settings Hardware test and the screen will display as below：

2 Use gear up and gear down to move the cursor and then press the Start button to
enter the sub menu.
3 After the testing is conducted, move the cursor to Exit , then press the Start button
to leave this page and return to the Operator settings .
4 Regarding detailed descriptions of the sub menu in Hardware test , refer to the below
content.

4.3.1 Connection status

In the page of Connection status , you can check the connection status of this cabinet.
1 Enter Operator settings Hardware test Connection status , and the screen will
display as below.

2 Press the Start button to leave this page and return to Hardware test .

25
4.3.2 I/O test
In the page of I/O test , you can run the testing of specific application to see if it is
normally functioning or not. Well-sensed devices will be shown with a corresponding
picture, value or on icon.
1 Enter Operator settings Hardware test I/O test . Then the screen will
display as below：

2 After you enter the page of I/O test , you can run the testing of a specific application
as explained in the chart below.
Applications Testing method Results
Coin Insert coins Off became on .
Service Press the button Off became on .
Start / Boost Press the button Off became on .
Test Press the button Off became on .
View Press the button Off became on .
Corresponding icons + or – will appear
Gear stick Shift the gear up and down as red.
When the steering wheel is turning
Turn the steering wheel to the to the left, the corresponding status
Steering wheel and value will be around -1, and when
left and right turning to the right , the value will be
around 1.
When throttle is released, the
corresponding status and value will be
Throttle Step on the throttle around 0, and when being stepped on,
the value will be around 1.
When brake is released, the
corresponding status and value will be
Brake Step on the brake around 0, and when the being stepped
on, the value will be around 1.

3 After testing is completed, press the【View】and【Start】buttons to leave this page, and

return to【Hardware test】menu.
Note: If the values of the throttle, brake and steering wheel are abnormal, enter【I/O
adjustment】to make adjustments.

26
4.3.3 Force feedback test
In the page of【Force feedback test】, you can test whether the force feedback is normally
functioning or not.
1 Enter【Operator settings】 【Hardware test】 【Force feedback test】, and the
screen will display as below：

2 Use the【gear up】and【gear down】functions on the gear stick to move the cursor, and
choose the【steering wheel】, then press the【Start】button to run testing.
3 While testing, press the【Start】button one more time to discontinue the testing process.
4 After the testing is completed, move the cursor to【Exit】and press the【Start】button to
return to【Hardware test】.

27
4.3.4 Lamp test
In the page of【Lamp test】, you can test if each light is normally functioning or not.
1 Enter【Operator settings】 【Hardware test】 【Lamp test】, then the screen will
display as below.

2 Use the【Gear up】and【Gear down】functions on the gear stick to move the cursor,
and choose the lamp to be tested, then press the【Start】button to run testing.
During testing, each light will blink as follows:
 Dashboard / View / Upper seat back light / Exhaust light / Brake light: Blink five times.
 Side light / RPM meter light / Speed meter light / Star / Boost meter light / Bottom seat
back light: Three kinds of RGB light will blink 5 times.
3 While testing, press the【Start】button one more time to discontinue the testing process.
4 After testing is completed, move the cursor to【Exit】, and press the【Start】button to
return to【Hardware test】

28
4.3.5 Screen test
In the page of【Screen test】, you can test whether the white balance, color level, and
lattice are normally functioning or not.
1 Enter【Operator settings】 【Hardware test】 【Screen test】.
2 After you enter the page of【Screen test】, the system will then process the testing, and
the following six pictures will be displayed for you to adjust the white balance, color
level, and lattice.

3 In the page of【Screen test】, press the【Start】button to change the displayed picture.
After the testing is completed, leave this page and return to the【Hardware test】.

29
4.3.6 Speaker test
In the page of【Speaker test】, you can test whether the loudspeaker is normally
functioning or not.
1 Enter【Operator settings】 【Hardware test】 【Speaker setting】, and the screen
will display as below：

2 Use the【Gear up】and【Gear down】functions on the gear stick to move the cursor,
and choose the soundtrack to be tested, then press the【Start】button to start testing.
3 The soundtrack being tested will keep producing a certain sound, and press the【Start】
button to discontinue the testing process.
4 After the testing is completed, move the cursor to【Exit】, and press the【Start】button
to return to【Hardware test】.
4.3.7 Vibration seat test
In the page of【Vibration seat test】, you can test whether the vibration chair is normally
functioning or not.
1 Enter【Operator settings】 【Hardware test】 【Vibration seat test】, and the
screen will display as below：

2 Use the【Gear up】and【Gear down】functions on the gear stick to move the cursor,
and choose the【Vibration seat test】, then press the【Start】button to start testing.
3 The 【Start】
seat being tested will keep producing with a certain vibration, and press the
button to discontinue the testing process.
4 After the testing is completed, move the cursor to【Exit】, and press the【Start】button
to return to【Hardware test】.

30
4.3.8 Keypad test
In the page of【Keypad test】, you can test whether the keypad is normally functioning or not.

1 Enter【Operator settings】 【Hardware test】 【Keypad test】, and the screen will
display as below：

2 Then press keypad key to test the key is normally function or not.
3 After the testing is completed, press【Start】button to exit, return to【Hardware test】menu.

4.3.9 Counter test

In the page of【Counter test】, you can test whether the counter is normally functioning or not.
1 Enter【Operator settings】 【Hardware test】 【Counter test】, and the screen will
display as below：

2 After you enter the page of【Counter test】, insert coins to the coin slot, and the number
on the right will goes up as more coins are inserted. Also, the counter inside the coin
counter will indicate the number too.
3 After testing is completed, press【Start】again to return to【Hardware test】.

31
4.4 Game settings
In the page of【Game settings】, you can set up all related features of the game.
1 Enter【Operator settings】 【Game settings】, and the screen will display as below：

2 Use the【Gear up】and【Gear down】functions on the gear stick to move the cursor,
and the item which the cursor points to will appear in red.
3 Use the【Start】button to confirm selected item or enter the sub menu.
4 After testing is completed, move the cursor to【Exit】, and press the【Start】button to
return to【Operator settings】.
5 Regarding the detailed description of the sub menu in【Game settings】, refer to the
following content.

32
4.4.1 I / O adjustment
In the page of【I / O adjustment】, you can adjust the minimum and maximum value of
the throttle, brake and steering wheel.
1 Enter【Operator settings】 【Game settings】 【I/O adjustment】, and the screen
will display as follow：

2 Enter the page of【I/O adjustment】, and move the cursor to【Start adjustment】, then
press the【Start】button to start the process.
3 While adjusting, turn the steering wheel to the left end, and press the【Start】button to
get the value.
4 Repeat the above steps, and calibrate other values.
5 After all adjustments are made, an icon of【Adjustment completed】will pop up, then
press the【Start】button to return to【Game settings】.

4.4.2 Country
In the page of Country】, you can set your current location.
1 Enter Operator settings Game settings Country , and the screen will
display as below：

2 When completed, press the【Start】button to return to【Game settings】, and the

country you selected will be shown next to the【Country】.

33
4.4.3 Store
In the page of【Store】, you can set up the name of your store.
1 Enter【Operator settings】 【Game settings】 【Store】, and the screen will display
as below：

2 When done, move the cursor to【OK】, and press the【Start】button to return to【Game
settings】. The name typed in will be shown next to the【Store】.

4.4.4 Difficult setting

In the page of【Difficult setting】, you can set up your preferred level of difficulty for the
game.
1 Enter【Operator settings】 【Game settings】 【Difficult setting】, and the screen
will display as below：

2 Then use the Gear up and【Gear down】functions on the gear stick to choose the
level of difficulty.
3 After your preferred level is chosen, press the【Start】button, and return to【Game
settings】. Then the level chosen will be shown next to the【Difficult setting】.
To avoid errors, make sure the difficult setting of all cabinets are the same.

34
 4.4.5 Tunnel setting
In this page of Tunnel setting , you can set up the tunnel for complex tunnel or straight
tunnel only.
1 Enter Operator settings Game settings Tunnel setting ¸ and the screen
will display as below

2 Use the Gear up and Gear down function on the gear stick to choose the settings.
3 When completed, press the Start button to return to Game settings , and the tunnel
setting you selected will be show next to the Tunnel setting
To avoid errors, make sure the tunnel setting of all cabinets are the same.

4.4.6 Coin settings

In the page of【Coin setting】, you can determine if free games are offered, and set up the
required number of coins to start or continue a game.
1 Enter【Operator settings】 【Game settings】 【Coin setting】, and the screen will
display as below：

2 Use the【Gear up】and【Gear down】functions on the gear stick to choose the item,
then press the【Start】button to start the process.
3 When the setting is completed, move the cursor to【Exit】, and press the【Start】button
to return to【Game settings】.
Note: When the【Freeplay】is set to be【On】, the start game or continue game cannot be setting.

35
4.4.7 Multiplayer setting
In the page of【Multiplayer setting】, you can determine the maximum bonus game
allowed and the timing to join a certain game.
1 Enter Operator settings Game settings Multiplayer setting , and the
screen will display as below：

2 Use the【Gear up】and【Gear down】functions on the shift lever to choose the item,
then press the【Start】button to start the process.
3 When the setting is completed, move the cursor to【Exit】, and press the【Start】button
to return to【Game settings】.
Note1: When【Bonus game for champion】is set to be【Off】, then the maximum bonus
game cannot be set.
Note2: When【Challenge ingame player】is set to be【On】, then players can challenge
other ingame players; if it´ s set to be【Off】, then players can only challenge other
players during the process.
To avoid errors, make sure the value of all cabinets are the same.

36
4.4.8 Volume setting
In the page of Volume setting , you can determine the start time of daytime and
evenings and the corresponding volume.
1 Enter Operator settings Game settings Volume setting , and the screen
will display as follow：

2 Use the Gear up and Gear down functions on the gear stick to choose the item.
3 Then press the Start button to enter the page of Daytime(Evening)volume setting ,
and the screen will display as below：

4 Use the Gear up and Gear down functions on the gear stick to choose the item,
then press the Start button to start the process.
5 When the setting is completed, move the cursor to Exit to leave this page.
6 In the page of Volume setting , move the cursor to Exit , and press the Start
button to return to Game settings .

37
4.4.9 Flow time setting
In the page of Flow time setting , you can determine the duration of each process.
1 Enter Operator settings Game settings Flow time setting , and the screen
will display as below：

2 Use the Gear up and Gear down functions on the gear stick to choose the item, and
press the Start button to start set-up.
3 When done, move the cursor to Exit and return to Game settings .
To avoid errors, make sure the value of all cabinets are the same.

4.4.10 Ranking board reset

In the page of Ranking board reset , you can reset all data on the ranking list.
1 Enter Operator settings Game settings Ranking board reset , and the
screen will display as below：

2 Use the Gear up and Gear down functions on the gear stick to choose Yes or No .
3 If Yes is selected, press the Start button to start resetting.
4 When the resetting process is completed, an icon of Reset completed will pop up,
then press the Start button to return to Game settings .
5 If No is selected, then the screen will immediately return to Game settings .

38
4.5 System settings
In the page of of System settings , you can set up the system or set the system to the default
setting.
1 Enter Operator settings System settings , and the screen will display as below：

2 Use the Gear up and Gear down functions on the gear stick to choose the item, and
the item chosen will appear in red.
3 Press the Start button to confirm or enter the sub menu.
4 When the setting is completed, move the cursor to Exit , and press the Start button
to return to Operator settings .
5 Regarding the detailed descriptions of the sub menu in System setting , refer to the
following content.
4.5.1 Connection setting
In the page of Connection setting , you can set up the group of cabinets to be connected
and player ID.
1 Enter Operator settings System settings Connection setting , and the
screen will display as below：

2 Use the Gear up and Gear down functions on the gear stick to choose the item to
set up, and press the Start button.
Note: Those cabinets to be connected should be set to the same group, and player ID as
1P, 2P, 3P and 4P (from left to right).
3 When the setting process is completed, move the cursor to Exit , and press the Start
button to return to System setting .
39
4.5.2 Time setting
In the page of Time setting , you can set up your local time.
1 Enter Operator settings System settings Time setting , and the screen
will display as below：

2 Use the Gear up and Gear down functions on the gear stick to choose the item to
set up, and press the Start button.
3 When the set-up process is completed, move the cursor to Exit and return to System
setting .

4.5.3 System reset

In the page of System reset , you can reset the system data to the default setting.
1 Enter Operator settings System settings System reset , and the screen
will display as below：

2 Use the Gear up and Gear down functions on the gear stick to choose Yes or No .
3 When Yes is chosen, press the Start button to start the resetting process.
4 After the resetting process, an icon of completed will pop up, then press the Start
button to return to system setup .
Note: When done, remember to set up I / O adjustment , 【Country , Store , and
Connection setting before you leave operator setting.
5 When No is chosen, then the screen will automatically direct to the page of system setting
40
4.5.4 Player data setting
In the page of Player data setting , you can set the player data automatic delete time or
delete player data manually.
1 Enter Operator setting System setting Player data setting , and the screen
will display as below

2 Use the Gear up and Gear Down functions on the gear stick to choose the item to
set up, and press the Start button.
3 When the set-up is completed, move the cursor to Exit and return to System setting .
All the machines must reset player data at same time, or reset will be failure.

When player data has been reset, the data cannot be restored.

41
4.6 Income data
In the page of Income data , you can check the daily, monthly and total revenue.
1 Enter Operator settings Income data , and the screen will display as below：

2 Use the Gear up and Gear down functions on the gear stick to move the cursor,
and the item selected will appear in red.
3 Press the Start button to confirm or enter the sub menu.
4 Move the cursor to Exit and press the Start button to return to the Operator settings
5 Regarding the detailed data of the sub menu in the Income data , refer to the
following content.

42
4.6.1 Daily income
In the page of Daily income , you can check the daily revenue of each cabinet.
1 Enter Operator settings Income data Daily income , and the screen will
display as below：

Descriptions of each item:

Item descriptions
Date Date of data
Coin(s) The total number of coins inserted that day
Total game The total number of games played that day
New game The total number of new games that day
Continued The total number of games continued that day
Freeplay The total number of freeplay that day
Bonus The total times of bonus game that day
Service The total time of service use that day
Current coin(s) The actual number of coins counted that day
Current service The actual use of service button that day
Total time The entire duration of time when the cabinet is turned on that day
Game time The entire duration of time when games are played that day
Idle time The entire duration of idle time that day
The average play time of the day
Avg. game time Formula : entire play time number of all rounds

2 Use the Gear up and Gear down functions on the gear stick to move the page, and
press the Start button to return to Income data .

43
4.6.2 Monthly income
In the page of Monthly income , you can check the daily revenue of each cabinet.
1 Enter Operator settings Income data Monthly income , and the screen
will display as below：

Descriptions of each item:

Item descriptions
Date Date of data
Coin(s) The total number of coins inserted that month
Total game The total number of games played that month
New game The total number of new games that month
Continued The total number of games continued that month
Freeplay The total number of freeplay that month
Bonus The total times of bonus game that month
Service The total time of service use that month
Current coin(s) The actual number of coins counted that month
Current service The actual use of service button that month
Total time The entire duration of time when the cabinet is turned on that month
Game time The entire duration of time when games are played that month
Idle time The entire duration of idle time that month
The average play time of the month
Avg. game time Formula : entire play time number of all rounds

2 Use the Gear up and Gear down functions on the gear stick to move the page, and
press the Start button to return to Income data .

44
4.6.3 Total income
In the page of Total income , you can check the total revenue of each cabinet.
1 Enter Operator settings Income data Total income , and the screen will
display as below：

Descriptions of each item:

item descriptions
Coin(s) The total number of coins inserted
Total game The total number of games played
New game The total number of new game created
Continue The total number of games continued
Freeplay The total number of free game played
Bonus The total number of bonus game played
Service The total use times of the service button
Current coin(s) The actual number of coin counted
Current service The actual use of service button
Game time The entire duration of play time
Business time The entire duration of time when the cabinet is turned on
Idle time The entire duration of idle time
The amount of idle time among the entire period when the cabinet is
Percentage of idle turned on.
Formula：【Idle time / Business time】X 100%

2 Press the Start button to return to Income data .

45
4.6.4 Income data reset
In the page of Income data reset , you can delete the data of daily income and monthly
income.
1 Enter Operator settings Income data Income data reset , and the screen
will display as below.

2 Use the Gear up and Gear down functions on the gear stick to choose between Yes
and No .
3 When Yes is selected, press the Start button to reset the data.
4 When done, an icon of Completed will pop up, then press the Start button to return
to Income data .
Note: This function cannot delete the data of Total income .
5 When No is selected, then the screen will automatically direct to the page of Income data

46
4.7 Troubleshooting

Problems Easy troubleshooting

 Enter Operator settings Hardware test I/O test to

run the testing.
The throttle, brake or the  If testing results are shown, enter Operator settings Game
steering wheel fail to work. settings I/O adjustment to adjusting I/O.
 If no testing results are shown, contact your local distributor to replace
the corresponding VR.

One of the speakers does  Check if the plugs between speakers and power ampli er are coming
not produce sound. off.
 If this problem persists, contact your local distributor to replace parts.

The light of the LED plate is  Check if the plugs between speakers and power ampli er are coming
not on. off.
 If this problem persists, contact your local distributor to replace parts.

 Enter Operator settings Hardware test I/O test , and

run the testing.
The buttons do not respond.  If lights do not respond, refer to Replacing parts and dissemble
the cap to check if plugs are coming off.
 If this problem persists, contact your local distributor to replace the
corresponding VR.

 Enter Operator settings Hardware test I/O test to

The shift gear does not run the testing.
respond.  If this problem persists, contact your local distributor to replace the
shift gear.

 Check if the plugs between the cabinet and screen are well connected,
The screen appears blank and whether DVI connectors on both sides are coming off.
after the power is on.  Check if the cabinet is plugged into the port of the video card.
 If this problem persists, contact your local distributor.

 Open the door of the cash box, and check if the master volume is
adjusted to its minimum value.
 Open the maintenance door located in the bottom of the cabinet, and
The speakers do not check if the volume of the power ampli er is adjusted to its minimum
produce sound. value.
 Check if the power of the power ampli er is turned on.
 Check if the plugs between the power ampli er and cabinet are
coming off.

If any of the above mentioned problems is unsolvable, contact your local distributor.

47
5. Maintenance and Service
5.1 Maintenance and service
Even though the machine works normally for a long time, the fault will occur. Therefore,
please perform routine check and maintenance concerning the following to ensure a
long-term use.

External Inspection

Stick “Warning” stickers correctly, keep it legible.

Firmly tighten the bolt for each adjuster.
Tighten screws for speaker assembly.
Tighten the signboard firmly.
Check if the screws fixing the parts loose.
Check if the connectors loose or missing.

Operation Inspection (With power on)

Sound is normally emitted from the speakers or not.

Fluorescent lamps and button lamps light up or not
Coin acceptor works properly or not.
Lifting and falling devices work properly or not.
YZ sensor works properly or not.
After completing all the checks, operate the game again and check the above
items with full care!

Servicing (conducted by a technician only)

Cut off the main power supply to avoid injury or electric shock when performing
maintenance.
Please contact our service center when performing any work that is not specified in this
Manual, and follow the instruction provided by the service center.
For consumables and spare parts (including screws), please use products specified by
Wahlap Technology.
Even though the main power is cut off, there is still high temperature and high pressure
in the power board and the monitor. The person will be burnt or get an electric shock if
he touches such parts. Please pay full attention to avoid contact.
Be sure to cut off the main power when you alter a spare part or unplug a connector.

48
5.2 Replacing parts
5.2.1 Replacing fl uorescent tube

1
Remove 4 M5 inner hex
screws and disassemble
the acrylic plate.

2
Remove 8 M4 cruciform
screws and disassemble
the side acrylic plate
before the light box.

3 Replace the fl uorescent

tube.
Light box front acrylic

4
When done, reassemble
the parts according to the
Machine name acrylic
reversed assembly.

5.2.2 Replacing the keypad / View button

1
Remove 4 M4 inner hex
screws and disassemble
the acrylic plate.
View button

2
Replace the View button
(if the keypad needs to
be replaced too, continue
the following steps).

3
Remove 4 M3 cruciform
screws and disassemble
the keypad.

4 Replace the keypad.

5
When done, reassemble
according to the reversed
assembly sequence.

49
5.2.3 Replacing the boost button and the light plate

1
Remove 4 M5 inner hex
screws and disassemble
the shift lever. Gear stick

2
Remove 4 M4 inner hex
screws and disassemble
the acrylic plate behind
the boost button.

3
Remove 2 M3 cruciform
screws and disassemble
the LED light plate behind
the boost button. Boost button

4 Replace the boost button/

the light plate.
Boost button acrylic
Boost meter light plate

5
When done, reassemble
according to the reversed
assembly sequence.

5.2.4 Replacing the side light plate

1
Remove 4 inner hex
screws and open the
caps.
Side light plate

2
Remove 4 M4 screws
and disassemble the Side acrylic
acrylic plate on the left
and right side. Side acrylic cover

3
Remove 3 M3 cruciform
screws and replace the
LED light plate.

4
When done, reassemble
according to the reversed
assembly sequence.

50
5.2.5 Replacing the exhaust light plate

1
Remove 5 M4 inner hex
screws and open the cap
of the exhaust pipe.

2
LED light plate

Remove 2 M4 cruciform
screws and disassemble
the LED light plate.

3
Then take off the LED
light plate and 2 M3
cruciform screws, then
replace the LED light
plate. LED light plate holder

4
When done, reassemble
according to the reversed
assembly sequence. Exhaust cover

5.2.6 Replacing the brake light plate

1
Remove 4 M6 inner hex
screws and lift up the
chair.

2
Remove 3 M4 cruciform LED light plate
screws and disassemble
the LED light plate.

3
Then take off the LED
light plate and 8 M3
cruciform screws, and
replace the LED light
plate.

4
When done, reassemble
according to the reversed
assembly sequence. LED light plate holder

51
5.2.7 Replacing the vibration speaker under the seat

1
Remove 4 M6 inner hex
screws and lift up the Vibration speaker
chair.

2 Remove 4 M8 screws.

3
Remove 4 M4 cruciform
screws and replace the
vibration loudspeakers.

4
When done, reassemble
according to the reversed
assembly sequence.

5.2.8 Replacing the vibration speaker behind the seat

1 Remove 6 plastic screws

and take off the cover. Vibration speaker

2
Remove 4 cruciform
screws and replace the
vibration loudspeakers.

3
When done, reassemble
according to the reversed
assembly sequence.

52
5.2.9 Replacing the speaker behind the seat

1
Speaker
Remove 6 plastic screws
and take off the cover.

2
Remove 8 M4 cruciform
screws and replace the
loudspeakers.

Speaker

3
When done, reassemble
according to the reversed
assembly sequence.

5.2.10 Replacing the bottom seat back light

1 Remove 6 plastic screws

and open the cover. Seat cover

2
Remove 4 M4 inner hex
screws and take off the
cap of the light.
LED light

3
Remove 3 M4 screws
and the decorative cover Speaker cover cap
of the loudspeaker to
replace the light strip (the
end should be applied
with hot melt adhesive).

4
When done, reassemble
according to the reversed Bottom seat
assembly sequence. back light cover

53
5.2.11 Replacing the dashboard LED light plate

1
Remove 4 M3 inner hex
screws and take off the
cap in the center of the Dashboard cover
steering wheel. Dashboard LED

2
light plate

Remove M12 screws

and take off the steering
wheel.

3
Remove 10 M4 inner hex
screws and the cover of
the steering wheel.

4
Remove 6 M3 cruciform
screws and replace the
LED plate. Steering wheel
Steering wheel
center cap

5
When done, reassemble
according to the reversed
assembly sequence.

5.2.12 Replacing front speaker

1
Remove 4 M3 inner hex Dashboard cover Front speaker
screws and take off the
cap in the center of the
steering wheel.

2 Remove M12 screws and

take off steering wheel.

3
Remove 10 M4 inner hex
screws and take off the
cap on the controlling
panel.
Front speaker

4
Steering whee
Remove 4 M4 cruciform
screws and replace the Steering wheel
two loudspeakers. center cap

5
When done, reassemble
according to the reversed
assembly sequence.

54
5.2.13 Replacing the pedals of the throttle and brake

1
Remove 4 M4 inner hex
screws and the left foot Pedals of the
throttle and brake
rest pedal cap.

2
Remove 4 M4 cruciform
screws and take off the
left foot rest pedal.

3
Remove 8 M4 inner
hex screws and the
decorative pedal.

4
Left foot rest
Take off the pedal of the pedal cap
throttle and the brake.
The decorative pedal Left foot rest pedal

5
When done, reassemble
according to the reversed
assembly sequence.

5.2.14 Replacing the VR of the steering wheel

1
Remove 2 cruciform Steering
screws behind the wheel motor
cabinet to take off VR.

2
When done, reassemble
according to the reversed
assembly sequence.

VR

55
5.2.15 Replacing the VR of the pedals of the throttle and brake

1
Remove 4 M4 cruciform VR holder
screws and take off the
caps in the front and the
back.

2
VR
Remove 4 M4 cruciform
screws and take off the
VR set.

3
Remove 4 M3 screws
on the VR set and the
electric VR and replace
VR.

4
VR holder
When done, reassemble
according to the reversed
assembly sequence.

5.2.16 Replacing the bass speaker

1
Remove 4 cruciform
inner screws and take off
the bass stereo.
Bass

2
Remove 3 M4 cruciform
screws and replace the
bass loudspeaker.

3
When done, reassemble
according to the reversed
assembly sequence.
Sound box

56
5.2.17 Maintaining the E3100

1 Remove 2 M4 butter y
screws.

2 Take out the xed set to

maintain or repair.

3
When done, reassemble
E3100 holder
according to the reversed
assembly sequence.

5.2.18 Maintaining the full-range AMP

1 Remove 2 M4 cruciform
screws and take out the
full-range AMP.

2 Remove 2 M4 cruciform
screws and replace 24W
AMP.

3 When done, reassemble

according to the reversed
assembly sequence.
24

57
5.2.19 Replacing the power supply and isolation transformer

1
Remove 2 M4 cruciform
screws and take out
the electricity supply
appliance.

2 Remove 4 M4 cruciform
screws take out the
isolation transformer.

3 When done, reassemble

according to the reversed
assembly sequence.

In some regions, the isolation transformer

900VA is not a required part.

5.2.20 Replacing I / O board / motor control board

1 Remove 4 M3 cruciform
screws and take off the I/
O board.

2 Remove 4 M3 cruciform
screws and take off the
motor control board.

3 When done, reassemble

according to the reversed
assembly sequence.

58
6. Assembly
6.1 Assembly tree diagram
Final host-machine assembly Host-machine assembly Host-machine frame assembly
Host machine assembly
Power pack assembly
Power amplifier assembly
I/O board assembly
Coining frame assembly
AC assembly-box
Back service-door assembly
Steering-wheel and lamp-plate assembly
Control panel assembly (Chinese version - card reader)
Control panel assembly (English version - digital buttons
Pedal assembly
High-pitched sound box assembly

Motor assembly
Bass loudspeaker assembly
Transformer assembly
Steering-wheel assembly

Base assembly Base-frame assembly

Lamp base-plate assembly
Transformer base-plate assembly

Left-side exhaust-pipe assembly

Right-side exhaust-pipe assembly
Fan assembly

Light box assembly Light-box frame assembly

Light-box left-side assembly
Light-box right-side assembly

Card-board assembly

Display assembly

Seat assembly Seat frame assembly

Seat-cover assembly
Seat-base assembly

Back-speaker assembly

Display supportingg frame

59
 1 2 3 4 5 6

6 13 17
1 8 2
A A
4 10 11 14
1 6 6 6
12 11 10 3
6 6 6 1

15 7 5 10 11 18
12 2 1 4 4 4

B B
21 弹簧垫圈 M6（镀黑） 12
20 平垫片 Φ6*Φ20*2.0（镀黑） 12
19 外六角螺丝 M6*25（镀黑） 12
18 六角法兰面螺母 M8（镀彩） 4

60
17 内六角大扁头螺丝 M5*12（镀铬） 2
6.2 Final host-machine assembly

16 十字大扁头螺丝 M6*12（镀黑） 4
8 16 15 十字大扁头螺丝 M4*12（镀黑） 12
1 4
14 外六角螺丝 M8*20（镀黑） 6
C 13 十字圆头三组合螺丝 M5*16（镀黑） 8 C
12 外六角螺丝 M8*50（镀黑） 10
11 弹簧垫圈 M8（镀黑） 20
10 平垫片 φ8*φ22*2.0（镀黑） 20
9 HXK-0000A04 机台外侧连接板 SPCC-3.0T 2
8 HXK-0000A03 显示器服务板 SPCC-1.2T 1
1 21 20 9 12 11 10 2 7 HXK-0000A02 显示器支撑架盖板 SPCC-1.2T 2
1 12 12 2 4 4 4 1 6 HXK-0300000 灯箱装配 1
5 HXK-0500000 座椅装配 1
4 HXK-0400000 显示器装配 1
D 3 HXK-0000A01 1 D
显示器支撑架
2 HXK-0200000 底座装配 1
1 HXK-0100000 机台主体装配 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6 7 8

31 51 62
1 11 7 30 52 51
1 12 4 41 58
1 4
A 21 A
1

37 59 60
1 1 1

38 39 57 44 电位器旋钮 Ф13mm 1
1 1 4 43 风扇网 120*120 2
42 风扇含轴承 120*120/AC110V 1
10 46 44 45
B 1 2 1 1 41 拨棍 1 B
40 塑胶钱箱 黑色 1
39 HXK-P0011 方向盘圧克力 PMMA-3.0T 1 HXK-0100D01 背面过双面胶
12 48 38 HXK-0100C02 ABS-1.5T 1
方向盘装饰块
1 2
37 HXK-0116000 方向盘装配 1
36 HXK-0115000 变压器装配 1
40 35 HXK-0114000 低音喇叭装配 1
1
34 HXK-0113000 马达装配 1
33 HXK-0112000 中高音音箱装配 2
26 48 32 HXK-0111000 脚踏装配 1
C 1 6 31 HXK-0100C01 控台后盖 ABS-4.0T 1 C
30 HXK-0110000 控台装配（读卡器） 1
6.3 Host-machine assembly

14 50 29 HXK-0109000 方向盘灯板装配 1
1 3 28 HXK-0108000 后服务门装配 1
6 50
1 11 27 HXK-0107000 AC盒装配 1

61
26 HXK-0106000 投币门框装配 1
32 5 53 19 48 2 48 25 HXK-0105000 IO板装配 1
1 1 4 1 4 1 4 24 HXK-0104000 功放装配 1
50 13 50 4
3 1 9 1 23 HXK-0103000 电源盒装配 1
D 15 48 16 50 3 48 22 HXK-0102000 主机装配 1
1 4 1 30 1 3 D
21 HXK-0100A19 方向盘轴套 45 1
20 HXK-0100A18 音箱支撑板 SPCC-1.5T 2
19 HXK-0100A17 线接口卡位板 SPCC-1.2T 1
18 HXK-0100A16 拨棍固定座 1
17 HXK-0100A15 显示器支撑架卡板 SPCC-1.2T 2
16 HXK-0100A14 脚垫座盖板 砂纹SUS304-1.2T 1
15 HXK-0100A13 脚垫座 1
14 HXK-0100A12 花纹铝板压条二 砂纹SUS304-1.2T 1 与HXK-0100A11对称

E 13 HXK-0100A11 花纹铝板压条一 砂纹SUS304-1.2T 1

E
12 HXK-0100A10 滑币道 1
11 HXK-0100A09 主机木板限位板 SPCC-1.5T 2
10 HXK-0100A08 测试服务面板 SPCC-1.2T 1
9 HXK-0100A07 塑胶侧边固定板 SPCC-1.2T 2
8 HXK-0100A06 塑胶下侧固定板 SPCC-1.5T 1
7 HXK-0100A05 塑胶左右固定板 SPCC-1.5T 2
6 HXK-0100A04 垫脚花纹铝板 花纹铝板-1.0T 1
5 HXK-0100B01 活动板 MDF-15.0T 1
4 HXK-0100A03 脚踏花纹铝板 花纹铝板-1.0T 1
F 3 HXK-0100A02 高音喇叭装饰板 1 F
2 HXK-0100A01 低音喇叭装饰板 1
1 HXK-0101000 机台框体装配 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

A A

29 48 7 48
1 3 2 4 18 51 62
17 48 1 4 4 22 54
2 4 1 2
B B
11 48
33 64 2 4
2 6
47 48
4 8
9 48
2 4 25 55
1 4
20 63
2 6

C 34 56 24 53
1 2 C
1 6
Host-machine assembly (2）

8 48
1 4

62
28 53
1 4
D 27 48 D
53 36 53 23 1 4
2 1 2 1 43 42 61 49
2 1 4 4

E E

F F

1 2 3 4 5 6 7 8
 1 2 3 4 5 6

A A

7 16
3 9

8 15
2 4

B 1 2 15 B
2 8 20 WAH-0000A05 2.5吋重型活动脚轮固定铁SPCC-2.0T 4
1
19 WAH-0000A04 2.5吋轻型活动脚轮固定铁/地SPCC-2.0T
脚螺丝固定铁2
4
18 六角螺母 M16（镀彩） 4

63
17 6 17 十字大扁头自攻螺丝 M4*12（镀黑） 20
4 2
6.3.1 Host-machine frame assembly

16 十字大扁头螺丝 M4*20（镀黑） 9
15 5
6 1 15 十字大扁头螺丝 M4*12（镀黑） 34
14 平垫片 Φ6*Φ20*2.0（镀黑） 32
13 弹簧垫圈 M6（镀黑） 32
C 12 外六角螺丝 M6*30（镀黑） 32 C
11 地脚螺丝 M16*Y100(镀彩） 4
15 3 4 15 10 活动脚轮 2.5寸低重心型 4
8 2 2 8 9 WAH-0000A06 M16地脚螺母固定铁1 SPCC-2.0T 4
11 18
17 19 20 17 4 4 8 HXK-0101A07 变压器木板限位板 SPCC-1.5T 2
8 4 4 8 7 HXK-0101A06 支撑架连接钣金 SPCC-2.5T 3
12 13 14 9 10 14 13 12 6 HXK-0101A05 前后连接钣金 SPCC-2.0T 2
16 16 16 4 4 16 16 16 5 HXK-0101A04 框架加强版金4 SPCC-1.5T 1
4 HXK-0101A03 框架加强版金3 SPCC-1.5T 2
D 3 HXK-0101A02 框架加强版金2 SPCC-1.5T 2 D
2 HXK-0101A01 框架加强版金1 SPCC-1.5T 2
1 HXK-0101B01 机台框架 夹板-15T、MDF-15T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

4 10
A 1 4 A

3 9 8
1 4 4

2 7
2 4
B B
6.3.2 Host machine assembly

5
1

64
C C

10 十字圆头三组合螺丝 M4*8（镀黑） 4
9 十字圆头三组合螺丝 M6*12（镀铬） 4
6 7 1 8 平垫片 Φ6*Φ20*2.0（镀铬） 4
4 8 1
7 十字大扁头螺丝 M4*12（镀黑） 12
6 榄核形防震脚座 4
5 ATX电源盒 S12II-520Bronze 1
4 AHD-0000000 主机装配 1
D 3 HXK-0102A02 SPCC-1.5T 1 D
主机支撑板
2 HXK-0102A01 主机电源固定板 SPCC-1.5T 2
1 HXK-0102B01 主机固定板 MDF-12.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A 2 4 A
1 4

3 5
1 3
6.3.3 Power pack assembly

B B
1
1

65
C C

5 十字大扁头自攻螺丝 M3*12（镀铬） 3
4 十字大扁头螺丝 M4*12（镀黑） 4
D 3 电源盒 NES-100-12 1 D
2 电源变压器 220V/110V转70V-10V/3A 1
1 HXK-0103B01 电源固定板 MDF-12.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

B B
6.3.4 Power amplifier assembly

66
1 3 2
1 4 1
C C

D 3 4
D
十字大扁头螺丝 M4*12（镀黑）
2 4.1功放 JK-OP-03 1
1 HXK-0104B01 功放固定板 MDF-12.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A
6.3.5 I/O board assembly

B B
3 4 5 6
1 4 4 4

67
2 4 5 6
1 4 4 4
1
1

C C

6 十字圆头三组合螺丝 M3*8（镀铬） 8
5 十字大扁头自攻螺丝 M3*12（镀铬） 8
4 L型脚座 M3mm 8
D 3 LQ-A_1094-00 1 D
马达控制板（ROHS）
2 I/O控制板（ROHS） LQ_1088-01 1
1 HXK-0105B01 IO板固定板 MDF-15.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

1
1

4 5
B 1 1 B
6.3.6 Coining frame assembly

2
1

68
4 3
1 1

C C

5 同号锁 5555锁-K 1
4 斜弯锁片 （001号） 2
D 3 杂号锁（含锁匙） M7-K 1 D
2 单投币门框(黑色) 单投币式 1
1 HXK-0106A01 前服务门框 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A
1 3 6 5 4 2 7
1 1 2 1 1 1 2
6.3.7 AC assembly-box

B B

69
C C

7 十字圆头三组合螺丝 M4*8（镀黑） 2
6 十字沉头螺丝 M3*10（镀黑） 2
5 船形开关 4P KCD7-2211N 1
4 保险丝筒 平头 F15A/125V 1
D 3 15GEEG3E 10A250V 1 D
滤波器
2 HXK-0107A02 网线挡板 SPCC-1.0T 1
1 HXK-0107A01 AC盒 SPCC-1.2T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

5 4 3 2 6 7
1 1 2 1 4 4
A A

1
1

B B
6.3.8 Back service-door assembly

70
C C

7 六角法兰面螺母 M4（镀彩） 4
6 十字圆头螺丝 M4*70（镀铬） 4
5 斜弯锁片 （001号） 1
4 同号锁 5555锁-S 1
D 3 120*120 2 D
风扇网
2 风扇含轴承 120*120/AC110V 1
1 HXK-0108B01 后服务门 MDF-15.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

1
1
4 2
3 1

B 5 3 B
6 1

71
C C
6.3.9 Steering-wheel and lamp-plate assembly

5 十字圆头三组合螺丝 M3*8（镀铬） 6
4 六角法兰面螺母 M4（镀彩） 3
D 3 GK-514-013 1
D
方向盘灯板
2 HXK-0109A02 方向盘灯板固定板 SPCC-1.2T 1
1 HXK-0109A01 塑胶中间固定板 SPCC-1.5T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A 10 12 19 A
1 1 4

3 2 15
1 2 4 11 17 15
1 4 4

1
1

4 2 15
B 1 1 4 B
20 十字大扁头螺丝 M3*12（镀黑） 4
19 内六角大扁头螺丝 M4*12（镀黑） 8
18 十字圆头三组合螺丝 M3*8（镀铬） 2

72
17 十字沉头螺丝 M3*10（镀黑） 4
15 5
4 1 16 内六角大扁头螺丝 M4*16（镀黑） 6
15 六角法兰面螺母 M4（镀彩） 22

15 16 8 14 开始按键 决安∮100-DOME-CW凸圆 白色 1
4 6 1 13 按键灯板 GK-514-011 1
C 12 视角切换按键 决安 蓝色BLC-DP-BK-E-CB 1 C
14 9 11 顯泰 防水规范IP65 ROHS 1
数字按键
1 1
18 13 10 HXK-P0008E 数字按键压克力 PMMA-5.0T 1
2 1 9 HXK-P0009 排档压克力 PMMA-5.0T 1
15 6 8 HXK-P0010 PMMA-5.0T 1
4 1 仪表板压克力
7 HXK-0110A06 数字按键固定板 SPCC-1.5T 1
6 HXK-0110A07 开始按键固定钣金 SPCC-1.5T 1
5 HXK-0110A05 控台左侧定位板 1
4 HXK-0110A03 控台左喇叭网盖板 SPCC-2.0T 1 与HXK-0110A02对称
D D
6.3.10 Control panel assembly (Chinese version - card reader)

3 HXK-0110A02 控台右喇叭网盖板 SPCC-2.0T 1

2 HXK-0110A01 控台喇叭网 网板-0.8T 2
1 HXK-0110C01 控台前盖 ABS-4.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A 10 12 19 A
1 1 4
5 17 15 11
1 4 4 1
3 2 15
1 2 4
1
1

4 2 15
B 1 1 4 B

19 内六角大扁头螺丝 M4*12（镀黑） 8

73
18 十字圆头三组合螺丝 M3*8（镀铬） 2
15 6 17 十字沉头螺丝 M3*10（镀黑） 4
4 1
16 内六角大扁头螺丝 M4*16（镀黑） 6
15 六角法兰面螺母 M4（镀彩） 26
15 16 8 14 开始按键 决安∮100-DOME-CW凸圆 白色 1
4 6 1
13 按键灯板 GK-514-011 1
C C
12 视角切换按键 决安 蓝色BLC-DP-BK-E-CB 1
14 9 11 读卡器 GRT-288-(HL2)I-2EH-BN 1
1 1 18 13 10 HXK-P0008 读卡器压克力 PMMA-5.0T 1 HXK-0110D04
2 1
15 7 9 HXK-P0009 排档压克力 PMMA-5.0T 1 HXK-0110D02
4 1 8 HXK-P0010 仪表板压克力 PMMA-5.0T 1 HXK-0110D01
7 HXK-0110A07 开始按键固定钣金 SPCC-1.5T 1
6 HXK-0110A05 控台左侧定位板 1
5 HXK-0110A04 读卡器定位板 SPCC-1.5T 1
4 HXK-0110A03 控台左喇叭网盖板 SPCC-2.0T 1 与HXK-0110A02对称
D D
3 HXK-0110A02 控台右喇叭网盖板 SPCC-2.0T 1
6.3.11 Control panel assembly (English version - digital buttons)

2 HXK-0110A01 控台喇叭网 网板-0.8T 2

1 HXK-0110C01 控台前盖 ABS-4.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

2 5 4 5
1 4 4 4
6.3.12 Pedal assembly

1
B 1 B

74
C C

5 外六角螺丝 M8*20（镀黑） 4
4 弹簧垫圈 M8（镀黑） 4
D 3 4
D
平垫片 φ8*φ22*2.0（镀黑）
2 感应式脚踏组件 火线狂飙 1
1 HXK-0111A01 脚踏固定板 SPCC-1.5T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

2 3
1 6

1
1
B B

75
6.3.13 High-pitched sound box assembly

C C

D 3 6
D
十字大扁头自攻螺丝 M4*8（镀铬）
2 高音喇叭 可密特 HB-1003BOX-4YR 1
1 HXK-0112A01 高音喇叭固定钣金 SPCC-1.5T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

14 12 13 4 7 8 10 15 14 13 12
2 2 2 1 1 2 1 2 3 3 3
A 6 A
1
9 14 13 12
1 6 6 6
6.3.14 Motor assembly.

B B
5
1

76
16 十字圆头三组合螺丝 M4*8（镀黑） 4
15 无头内六角螺丝 M5*6（镀黑） 3
14 外六角螺丝 M8*20（镀黑） 17
13 弹簧垫圈 M8（镀黑） 17
C 1 16 11 2 14 12 13 3 C
1 4 1 1 3 3 3 1 12 平垫片 φ8*φ22*2.0（镀黑） 17
非接触式角度感应器组（R可密特,VR磁铁固定座+
11 OHS） 1
磁铁,电磁VR外盖+ 感应板
10 轴承 PF205 1
9 SR1-0501A06 方向盘支架 1 借用雷动赛车
8 SR1-0501A05 摆动轴胶垫 优力胶 2 借用雷动赛车
7 SR1-0501A04 马达摆动架 45 1 借用雷动赛车
6 SR1-0501A03 摆动轴键 45 1 借用雷动赛车
5 SR1-0501A02 马达轴套 45 1 借用雷动赛车
4 SR1-0501A01 方向盘固定板 SPCC-2.0T 1 借用雷动赛车
D 3 112ZY100-40 1
D
马达(DC) 1
2 HXK-0113A02 电位器固定板 SPCC-1.5T 1
1 HXK-0113A01 马达固定座 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

1
1
A A

2 4
2 4

B B

77
6.3.15 Bass loudspeaker assembly

C C
3
1
5 4
1 4

5 可密特 HIT-800W 1
低音喇叭 4Ω/60W(附防磁蓋)
4 十字大扁头螺丝 M4*20（镀黑） 8
D 3 吸音棉 20mm厚*160mm宽*400mm长(密度:35) 1 D
2 HXK-0114A01 低音音箱固定板 SPCC-1.5T 2
1 HXK-0114B01 低音喇叭音箱 MDF-15.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

2 3
B 1 4 B
6.3.16 Transformer assembly

78
1
1
C C

D 3 4
D
十字圆头三组合螺丝 M5*16（镀黑）
2 变压器 HL1100W 220V/110V 1
1 HXK-0115B01 变压器固定板 MDF-12.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

2
1 1 4
1 3
A A

3 5
B 1 4 B
6.3.17 Steering-wheel assembly

79
C C

5 内六角圆柱头螺丝 M4*12（镀铬） 4
4 十字圆头三组合螺丝 M4*12（镀黑） 3
D 3 SR1-1300C02 ABS-2.5T 1 D
方向盘下壳
2 SR1-1300C01 方向盘上盖 ABS-2.5T 1
1 SR1-1300A01 方向盘（包胶） 1 借用雷动赛车
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6 7 8

23 8
4 1

A 25 9
4 1 A

28 12
4 1
24 19 20 27 4
4 1 1 14 1

B B

23 3
6.4 Base assembly

4 1

22 21 5
4 4 1

C C
27 18
5 1 2 22 21
1 4 4 28 4
十字大扁头螺丝 M4*20（镀黑）
27 内六角大扁头螺丝 M4*25（镀黑） 14
26 十字沉头螺丝 6

80
M4*16（镀黑）
25 十字大扁头螺丝 M4*30（镀黑） 4
24 十字圆头三组合螺丝 M4*12（镀黑） 4
23 十字大扁头螺丝 M4*12（镀黑） 24
D 22 外六角螺丝 M6*25（镀黑） 12
6 21 22 D
1 4 4 21 平垫片 φ8*φ16*2.0（镀黑）12
20 弯形锁片 （002号） 1
23 10
3 1 19 同号锁 5555锁-K 1
18 HXK-0200C02 排气管左侧塑胶 ABS-3.0T 1 与HXK-0200C01对称
1
1 17 HXK-0200C01 排气管右侧塑胶 ABS-3.0T 1
16 HXK-0200D04 底座后背PVC 黑色PVC-0.5T 1
15 HXK-0200D03 底座灯板PVC 红色PVC-0.5T 1
26 14 15 13 14 HXK-0200D02 座位装饰亚克力二 珠仔花PMMA-3.0T 1
6 1 1 1 7 23 13 HXK-0200D01 座位装饰亚克力一 PMMA-8.0T 1
E 4 8 E
12 HXK-0206000 底座风扇装配 1
11 HXK-0205000 右侧排气管装配 1
10 HXK-0204000 左侧排气管装配 1
9 HXK-0203000 底座变压器装配 1
17 27
1 5 8 HXK-0202000 底座灯板装配 1
7 HXK-0200A06 排气管塑胶加强钣金 SPCC-1.5T 4
23 11 6 HXK-0200A05 座位盖板支撑板二 SPCC-1.5T 1 与HXK-0200A04对称
3 1 5 HXK-0200A04 座位盖板支撑板一 SPCC-1.5T 1
4 HXK-0200A03 座位盖板 1
F 16 3 HXK-0200A02 座位合页 1 F
1
2 HXK-0200A01 座位前侧板 1
1 HXK-0201000 底座框架装配 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6 7 8
 1 2 3 4 5 6

12 13
4 8
A 1 11 13 A
1 4 8

6 2
6 1
6.4.1 Base-frame assembly.

B B

81
10 5
4 4 13 十字大扁头自攻螺丝 M4*12（镀黑） 16
C 7 8 9 3 12 WAH-0000A05 2.5吋重型活动脚轮固定铁SPCC-2.0T 4 C
16 16 16 4
11 WAH-0000A04 2.5吋轻型活动脚轮固定铁/地SPCC-2.0T
脚螺丝固定铁2
4
7 9 8 4
16 16 16 4 10 六角螺母 M16（镀彩） 4
9 平垫片 Φ6*Φ20*2.0（镀黑） 32
8 弹簧垫圈 M6（镀黑） 32
7 外六角螺丝 M6*30（镀黑） 32
6 十字大扁头螺丝 M4*12（镀黑） 6
5 地脚螺丝 M16*Y100(镀彩） 4
4 活动脚轮 2.5寸低重心型 4
D 3 WAH-0000A06 SPCC-2.0T 4 D
M16地脚螺母固定铁1
2 HXK-0201A01 底座框架加强钣金 SPCC-1.5T 1
1 HXK-0201B01 底座框架 夹板-15T、MDF-15T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

B B

1
6.4.2 Lamp base-plate assembly

82
2 3
2 8
C C

D 3 8 D
十字圆头三组合螺丝 M3*8（镀铬） 1
2 底座灯板 GK-514-012 2
1 HXK-0202A01 座位LED灯固定板 SPCC-1.2T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

B B

2 6

83
1 4
6.4.3 Ransformer base-plate assembly

1 3 5
1 4 7
1 6 6 6
C C

7 十字大扁头自攻螺丝 M3*12（镀铬） 6
6 十字圆头三组合螺丝 M4*12（镀黑） 4
5 十字圆头三组合螺丝 M3*8（镀铬） 6
4 L型脚座 M3mm 6
D 3 功放 HIT-AP-2WAY-4OHMS-50W 1 D
2 底座变压器 200W AC220/110V转16V- 1
0V-16V
1 HXK-0203B01 座位变压器安装板 MDF-15.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

11 12 13 6
4 4 4 2

A 8 1 A
4 2

3
7 8 4 1
6 6 2

9 5
4 2

10 2
B 4 2
B

84
6.4.4 Left-side exhaust-pipe assembly

C 13 外六角螺丝 4 排气管自带 C
12 弹簧垫圈 M6（镀黑） 4
11 平垫片 Φ6*Φ20*2.0（镀黑） 4
10 十字大扁头螺丝 M4*12（镀黑） 4
9 十字圆头三组合螺丝 M3*8（镀铬） 4
8 六角法兰面螺母 M4（镀彩） 10
7 内六角大扁头螺丝 M4*12（镀铬） 6
6 排气管 2
5 排气管LED灯 WL-PCB0-0001-0040 2
4 HXK-0204D01 排气管装饰亚克力 PMMA-3.0T 2
D 3 HXK-0204A03 SPCC-1.5T 1 D
排气管左安装板
2 HXK-0204A02 排气管LED灯固定板 SPCC-1.5T 2
1 HXK-0204A01 排气管固定板 SPCC-1.2T 2
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

11 12 13 6
4 4 4 2
8 2
A 4 2 A
1
1
7 8 4
6 6 2

9 5
4 2

B 10 3
6 2 B

85
6.4.5 Right-side exhaust-pipe assembly

C 13 外六角螺丝 4 排气管自带 C
12 弹簧垫圈 M6（镀黑） 4
11 平垫片 Φ6*Φ20*2.0（镀黑） 4
10 十字大扁头螺丝 M4*12（镀黑） 6
9 十字圆头三组合螺丝 M3*8（镀铬） 4
8 六角法兰面螺母 M4（镀彩） 10
7 内六角大扁头螺丝 M4*12（镀铬） 6
6 排气管 2
5 排气管LED灯 WL-PCB0-0001-0040 2
4 HXK-0204D01 排气管装饰亚克力 PMMA-3.0T 2
D 3 HXK-0204A02 排气管LED灯固定板 SPCC-1.5T 2 D
2 HXK-0204A01 排气管固定板 SPCC-1.2T 2
1 HXK-0205A01 排气管右安装板 SPCC-1.5T 1 与HXK-0204A03对称
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A
3 4
2 8
6.4.6 Fan assembly

1
B 1 B

86
2
2

C C

4 十字大扁头螺丝 M3*12（镀黑） 8
D 3 120*120 2 D
风扇网
2 HXK-0206A01 风扇固定钣金 SPCC-1.2T 2
1 风扇含轴承 120*120/AC110V 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

7 2 1 4 8 7
4 1 1 1 6 6
A A

3 7
6.5 Light box assembly

1 4
B B

87
7 6
4 2

5
C 1 C

8 平垫片 Φ6*Φ20*2.0（镀铬） 6
7 内六角大扁头螺丝 M5*12（镀铬） 18
6 HXK-0300A01 看板圧克力装饰板 SPCC-2.0T 2
5 HXK-P0005 机种名压克力 PMMA-5.0T 1 HXK-0300D01
4 HXK-0304000 豪卡板装配 1
D 3 HXK-0303000 1 D
灯箱右侧装配
2 HXK-0302000 灯箱左侧装配 1
1 HXK-0301000 灯箱框架装配 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A
9 3 5
4 2 1
2 7
1 8

8 4 6
8 1 2

B 1
1 B
6.5.1 Light-box frame assembly.

88
C C

9 十字圆头三组合螺丝 M4*8（镀黑） 4
8 十字大扁头螺丝 M4*12（镀黑） 8
7 六角法兰面螺母 M4（镀彩） 8
6 EVA海绵2.0T 2*18mm 10米/卷 2
5 一体化荧光灯 T5 21W AC110V 1
4 HXK-0301D02 灯箱前侧压克力 雾白PMMA-3.0T 1
D 3 HXK-0301A02 SPCC-1.0T 2
D
灯管固定钣金
2 HXK-0301D01 灯箱上侧压克力 雾白PMMA-3.0T 1
1 HXK-0301A01 灯箱框架 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

3 7
1 4
6 2
4 1

B B

89
5 4
6.5.2 Light-box left-side assembly

3 1

C C

1
1

7 内六角大扁头螺丝 M4*12（镀黑） 4
6 六角法兰面螺母 M4（镀彩） 4
5 十字圆头三组合螺丝 M3*8（镀铬） 3
4 灯箱侧边灯板 GK-514-012 1
D 3 HXK-0302A02 灯箱左侧外盖 1 D
2 HXK-P0006 左侧导光压克力 PMMA-8.0T 1 HXK-0302D01
1 HXK-0302A01 看板左侧固定板 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A

3 7
1 4

B B

90
6.5.3 Light-box right-side assembly

1
1

5 4
C 3 1 C

7 内六角大扁头螺丝 M4*12（镀黑） 4
6 2
4 1 6 六角法兰面螺母 M4（镀彩） 4
5 十字圆头三组合螺丝 M3*8（镀铬） 3
4 灯箱侧边灯板 GK-514-012 1
D 3 HXK-0303A02 灯箱右侧外盖 1 D
2 HXK-P0007 右侧导光压克力 PMMA-8.0T 1 HXK-0303D01
1 HXK-0303A01 看板右侧固定板 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

6 5 2
4 4 1

A A
6.5.4 Card-board assembly

B B
1
1

91
6 5 4
6 6 1
6 3
12 3 （缺口向下）
C C

6 十字大扁头螺丝 M4*12（镀黑） 22
5 平垫片 Φ5*Φ12*1.0（镀黑） 10
4 HXK-P0001 左前红车板 安迪板-5.0T 1 HXK-0304D02 过雾膜
D 3 HXK-0304A02 豪卡板固定钣金 SPCC-1.2T 3 D
2 HXK-P0003 红车背景板 安迪板-5.0T 1 HXK-0304D01过雾膜

1 HXK-0304A01 豪卡板加强钣金 SPCC-1.2T 1

序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

A A
9
2

2
1
6.6 Display assembly

8
2
B B

12
1
11

92
2
10
2

3 4 5 6
C 1 10 10 10 C
12 HXK-0400C01 显示器玻璃 玻璃-5.0T 1

1 7 11 EVA海绵5.0T 5*25mm 10米/卷 2

1 12 10 EVA海绵5.0T 5*25mm 10米/卷 2
9 EVA海绵2.0T 2*18mm 10米/卷 2
8 EVA海绵2.0T 2*18mm 10米/卷 2
7 内六角大扁头螺丝 M4*12（镀黑） 12
6 外六角螺丝 M6*16（镀黑） 10
5 弹簧垫圈 M6（镀黑） 10
4 平垫片 Φ6*Φ20*2.0（镀黑） 10
D 3 1 D
LED液晶显示器 42吋LED带架
2 HXK-0400A02 显示器装饰框 1
1 HXK-0400A01 液晶框 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6
4 15
1 6
14 6
8 2
9 18
A 1 4 A
16 3
5 1
6.7 Seat assembly

2 16
1 5
B B

18 内六角大扁头螺丝 M4*16（镀黑） 4

93
7 13 17
1 4 2 17 EVA海绵2.0T 2*18mm 10米/卷 4
16 十字大扁头自攻螺丝 M4*8（镀铬） 10
此处装配需打螺丝胶
15 塑胶螺丝 6
1
1 14 十字大扁头螺丝 M4*12（镀黑） 8
C 17 13 8 13 内六角大扁头螺丝 M4*12（镀黑） 8 C
2 4 1 12 4
外六角螺丝 M8*20（镀黑）
此处装配需打螺丝胶
11 弹簧垫圈 M8（镀黑） 4
10 平垫片 φ8*φ22*2.0（镀黑） 4
5 10 11 12 9 HXK-P0012 座椅背盖压克力 PMMA-5.0T 1 HXK-0500D01
1 4 4 4 8 HXK-0500A02 SPCC-1.5T 1
座椅底座前盖板
此处装配需打螺丝胶 7 HXK-0500A01 座椅底座后盖板 SPCC-1.5T 1
6 HXK-0504000 背靠喇叭装配 2
5 HXK-0503000 座椅底座装配 1
4 HXK-0502000 座椅背盖装配 1
D 3 1
D
座椅喇叭网-右 网板-1.0T
2 座椅喇叭网-左 网板-1.0T 1
1 HXK-0501000 座椅框架装配 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

5 9
A 1 4
A
4 9
1 4
6.7.1 Seat frame assembly

B B

94
2
1

C C

注：低频振动器固定时需打螺丝胶
1
1
9 十字圆头三组合螺丝 M5*16（镀黑） 8
8 外六角螺丝 M8*50（镀黑） 8
8 7 6 3 7 弹簧垫圈 M8（镀黑） 8
8 8 8 2
6 平垫片 φ8*φ22*2.0（镀黑） 8
5 低频振动器 4Ω/50W 1
4 HXK-0501A01 座椅震动喇叭固定板 SPCC-1.5T 1
D 3 HXK-0501A02 2 D
座位弯管 方管30*2/Q235
2 SD3-07-01-03 座椅靠背 1
1 HXK-0501C01 座椅座垫 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

3 此处打热熔胶
1
A A

4
1

1
6.7.2 Seat-cover assembly

LED灯带打热熔胶 1
B B

95
6
1

C C
5 7 8
4 1 1
5 2
3 1
8 座椅背盖LED灯带 DC12V RGB L=300mm（1M60颗） 1
7 4吋喇叭盖（底座） 1 4吋喇叭盖自带
6 4吋喇叭盖（网盖） 1 4吋喇叭盖自带
5 六角法兰面螺母 M4（镀彩） 7
4 座椅背盖右装饰灯 R-100 1
D 3 R-100 1 D
座椅背盖左装饰灯
2 HXK-0502A01 喇叭盖固定板 1
1 HXK-0502C01 座椅背盖 ABS-4.0T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6
4 6 7 8
1 2 2 2

A A

2 5
1 4
3 6 7 8
1 2 2 2
6.7.3 Seat-base assembly

B B

96
注：低频振动器固定时需打螺丝胶

C C

1
1

8 六角法兰面螺母 M8（镀彩） 4
7 弹簧垫圈 M8（镀黑） 4
6 平垫片 φ8*φ22*2.0（镀黑） 4
5 十字圆头三组合螺丝 M5*16（镀黑） 4
4 滑轨（右） 1
D 3 滑轨（左） 1 D
2 低频振动器 4Ω/50W 1
1 HXK-0503A01 座椅底座焊件 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6

2
1
A A

1 5
1 4

B B
6.7.4 Back-speaker assembly

97
C C

4 5 3 5
1 4 1 2

5 十字大扁头自攻螺丝 M4*16（镀黑） 10
4 椭圆形防磁喇叭 3x5吋 8Ω 15W（椅背处用 1
D 3 1
D
座椅喇叭盖
2 座椅喇叭罩 1
1 6100 背靠喇叭固定铁 1 借用极速2代
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 1 2 3 4 5 6
4
450 1 内外两侧沿边段焊
段焊

A A
3 2
1 1

6
满焊打磨 2
1

°
1

85
B B
5
2 满焊打磨 沿边段焊
800 150
7
6.8 Display supportingg frame

1 沿边段焊

98
C C

7 HXK-0000A01-07 支撑架底座加强钣金 SPCC-1.5T 1

6 HXK-0000A01-06 支持架加强钣金二 SPCC-3.0T 2
5 HXK-0000A01-05 支撑架加强钣金一 SPCC-3.0T 2
4 HXK-0000A01-04 灯箱固定钣金 1
D 3 HXK-0000A01-03 支撑架右侧焊件 1 D
2 HXK-0000A01-02 支撑架左侧焊件 1
1 HXK-0000A01-01 支撑架底座 SPCC-1.5T 1
序号 图 号 名 称 材料/规格 数量 备注
1 2 3 4 5 6
 HXK-P0003 HXK-P0004
HXK-P0005

HXK-P0001 HXK-P0002
按键贴
HXK-P0009
7. Printing Pattern

99
HXK-P0012 HXK-P0023

HXK-P0010
HXK-P0018
HXK-P0013

HXK-P0024
1/2
 HXK-P0006 HXK-P0007

HXK-P0016 HXK-P0017

100
HXK-P0019 HXK-P0020
HXK-P0008

HXK-P0011

HXK-P0022
HXK-P0021

HXK-P0015
2/2
8. Wiring Diagram

101
 1 2 3 4 5 6 7 8

COM21 5557-04R
1100VA 变压器 250VA 变压器 K5 VL4P
红 红 红
1 1 1 1 AC10V
AC110V AC10V 白 白 白
AC220V NOISE SW1 FUSE 6A K1 VL3P AC220V AC110V
K4 VL4P 0V 红
2 2
3 3 红 红
2
3
2 AC70V
3 0V
马达板（1/2）
棕 0V 白
L 黄 棕 棕 0V 1 白 白 AC70V 白 白 白
 L L
G G G 绿黄 绿黄
1
2
1
2
绿黄
蓝
绿黄
灰
1
2 2 绿黄 绿黄 0V 0V
4 4 4 4 0V

N N N 紫 蓝
3 3 FG 3 3 灰 灰
电源线2.0sq FIL 4 4 FG
LINE LOAD
D-TYPE 9PIN 孔插 CON5 2芯屏蔽线 芯线24＃
AC盒 K3 VL4P 1 1
AC盒FG 2 红
底座部分 白
1 1 白
白
L V+
橙
I/O（1/2） 2
3 白
绿黄
K55 VLR-01VF
1

绿黄
绿黄
绿黄
2 2
绿黄 绿黄
EARTH COM
黑 K14 YL3P CON7 VHR-2N 3
2/2 1

灰
灰

白
灰 灰 灰 橙 橙 1 1 橙 橙 5 5 黑

K6 VL6P
3 3 N V+ 2 2 12V

6
4
2
5
3
1
黑 黑 2 2 黑 黑
1 1 9 9
4 4 COM GND
绿黄 绿黄

5
4
2

3
1
电源盒 3 3

白
白
绿黄

绿黄
灰

灰
K7 VL3P
白 白 NES-100-12
绿黄
1
2
1
2
绿黄 2/2 2
灰 灰
FAN FG 3 3
K15 YLP-08V
底座风扇 橙 1
黑
2
 橙
黑
3
4

K21 VL3P
橙
黑
5
6
2/2 3
K50 VL3P
白 白 白 白 白 橙
FL1 AC110V 1 1 1 1 7
灰 灰 灰 灰 灰 黑
T5 21W日光灯 AC110VRET 2 2 2 2 8
绿黄 绿黄 绿黄
3 3 绿黄
3 3
全音域AMP
灯箱部分 灯箱 FG XH4P WA4 K11 YLP-04V
K8 VL3P D3 INRET 3P 白 白
白 白 白 R+ 4 4 1
黑 黑
绿黄
1
2
1
2
绿黄 绿黄
L
G
L
G
R- 3
L+ 1
3
1
红 红
2
3
2/2 4
灰 灰 灰 黑 黑
3 3 N N L- 2 2 4
DVI
VIDEO

D2 INRET 3P
ATX电源
电脑电源线 芯线18＃
42Inch LCD VH2P WA3 K25 YLP-02V
屏幕部分 AC L L L
白
R- 1 1
黑 黑
1
 EARTH G G
绿黄
灰
R+ 2 2
白 白
2 2/2 5 
AC N N N

VH2P WA2 K26 YLP-02V

黑 黑
L- 1 1 1
L+ 2 2
红 红
2 2/2 6
VH3P WA1 K24 YLR-02V
K9 VL3P 黑 黑
C- 1 1 1
白
绿黄
1 1
白
绿黄 棕
K2 VL3P 电脑电源线 芯线18＃ D1 INRET 3P NC 2 2
蓝
2 2/2 7
1 棕 棕
2 2 蓝
灰 灰
1 L L AC220V C+ 3 3
绿黄
2 绿黄
3 3 绿黄
FAN FG 2 G G EARTH
蓝
3 3 蓝 蓝
N N AC220VRET
机箱风扇
XH3P WA5 K21 SM3P
黑 黑 黑
GND 2 2 3 3
红 红
2 红

绿黄
R IN 3 3 2
 1 白
白
1 1 白 

灰
白
L IN 1

K13 VL3P
DVI

1
2
3 3
VIDEO

1
2
白

灰
绿黄
RJ45
LAN
主机部分 LAN
USB-A
USB
2/2 8
5557-18R
&
5557-4R

D-TYPE 9PIN 孔插 COM1 K51 YLP-03V

白
主机 1 1 2芯屏蔽线 芯线24＃ 绿黄
1
红 2
2
3
2
3 白
灰
3 2/2 9

5
9
5
9
黑

双音频头Φ3.5 COM2 2芯屏蔽线 芯线24＃ K22 YLP-06V
白 白 1
GND 红 红
2
L R 黑 黑
3
2芯屏蔽线 芯线24＃
白
4
2/2 10
红
5
黑
6

YL2P K52


白
绿黄
1
2
1
2
白
绿黄 
灰 灰
2 2
FAN FG

座椅下风扇

1/2

1 2 3 4 5 6 7 8

102
 1 2 3 4 5 6 7 8
L1 XH6P K53 YL6P K61 YL8P K33 YL8P CON3 XH12P
红 红 测试 服务 2芯屏蔽线 芯线24＃
DATA6 1 1 1 1 1 1 1 1 1 1 DATA6 XH6P C3 K22 YLR-06V
蓝 蓝 K45 YL3P 白 白
CLK3 2 2 2 2 2 2 2 2 2 2 CLK3 1 1 1
绿 绿 紫 紫
YLP-08V K15
橙 橙
K16
右侧灯板 LATCH 3 3 3 3 3 3 3 3
黑
3 3 LATCH 绿
1 1
2 绿
投币器、 2 2
红 红
2
1/2 10
1
黑 黑
1
B1 NC 4 4 4 4 4 4 4 4
橙 橙 K16 黑
4 4 GND 黑
2
黑 3 3
黑 黑
3
2
3
橙
2
YLP-02V
DC12V
GND
5
6 6
5 5 5
6 6
5 5
6 6
5 5
6 6 黑
黑
1
2
黑 白红
5
6
5 GND
6 DATA7
3 3
K46 YL2P
测试服务 音量VR组件
VR-B10KΩ
5 5
白
2芯屏蔽线 芯线24＃
白
4
黑

 1/2 3 4
橙 橙
K17
1
7 7 7 7
B1
YLR-02V 白蓝
白绿
7 7 CLK4 灰
1 1
灰
面板部分 4 4
红 红
5

5
6
黑 黑
2 B2 L2 XH6P
8 8 8 8 8
9
8 LATCH4
9 GND SETTING
XH6P
6
CON8
6
紫
橙
2 2
橙 计数器 6 6
黑 黑
6
橙 YLP-02V K54 YL6P K62 YL6P K34 YL6P 绿
7 白红 10 10 DATA8 SERIVCE 5 5 K44 YL4P T2 XH6P
黑 K19 DATA7 1 1 1 1 1 1 1 1 黑
8 橙
黑
1
2 B3 CLK4
LATCH
2
3
2
3
2 2
3 3
2 2
3 3
2 2
3 3
白蓝
白绿
11
12
11 CLK5
12 LATCH5
GND
NC
4
3
4
3 C9
白
1
2
1
2
白 白
1
2
1 N.C.
2 N.O. 1/2 1
灰 黑 黑 K55 VLP-01V
YLP-02V 左侧灯板 NC 4 4 4 4 4 4 4 4 COIN COUNT 2 2 3 3 3 3 COUNTER 投币器 FG 绿黄
橙 橙
K17 橙 橙 橙 1
DC12V 1 1 4 4 4 4 COUNTER
橙
K20
1
DC12V
GND
5
6
5
6
5 5
6 6
5 5
6 6
5 5
6 6
黑 黑
1
2
黑 B2 橙
5 5 12V
TW-800Ⅲ
黑
2 B4 YLR-02V
黑
6 6 GND FG
1/2 2
YLP-02V
K43 YL12P
YLR-02V K25黑 S1 XH4P 灰
1 1
灰
D1
I/O（2/2） K38 YLR-03V J1 YLP-03V J2 PHDR-10VS
橙 灰 灰 橙 橙 橙 紫
1 DC12V 1 1 2 2 1 1 1 1
白 灰 灰 绿 绿 绿 绿
控台中高音喇叭 NC 2 2
1/2 5 2 + 刹车灯1
SIGAL1 3 3
灰
灰
灰
3 3
4 4
灰
XHP-8 CON11 K37 YL4P
黑
2
3
2
3
黑 黑
3 3
9 9
黑
NS
+ K24 YLP-02V
右 SIGAL2 4 4 橙
9 5
橙
橙 橙 磁力式VR 油门 黑
1

S2 XH4P
橙
8 6
橙 3V3
AD1（油门）
1
2
1
2
绿 绿
1 1
2 2
绿
K39 YLR-04V J3 YLP-04V J4 PHDR-10VS
蓝
2 1/2 7
11 11 黄
 
橙 黄 黄
1 1 AD0（刹车） 3 3 3 3 橙
1 橙
YLR-02V K26 DC12V CON12 XH9P 橙 紫
黑 12 12 黑 黑 黑 1 1 1
1 NC 2 2 红 红 红 GND 4 4 4 4 黄 黄 黄 黄
红 控台中高音喇叭 刹车灯2 灰 5 5 1 1 DATA6
GND
2 2 3 3 NS
1/2 6 2 + SIGAL1
SIGAL2
3 3
4 4
灰
绿
蓝
6 6
7 7
绿
蓝
绿
蓝
2
3
2
3
CLK3 AD2(方向盘)
5
6
5
6
黑
3
4
3
4
黑 黑
9 9
黑
刹车
8寸 低音喇叭
左 LATCH 磁力式VR
橙 橙 橙 MOTOR SENSOR 7 7
K48 SM4P 10 10 4 4 GND 橙
橙 12V 8 8
R
G
2 2
1 1
绿
红
5
6
5 GND
6 DATA7
刹车、油门部分
控台喇叭、两侧灯板部分 软条灯
B 3 3 蓝
橙
7 7 CLK4
DC12 4 4 8 8 LATCH4 K11 K29 YL8P
白
9 9 GND 1 白 白
1 1 +
2/2座椅灯饰部分 1/2 4 2
黑
红
黑
红
2 2
黑
红
座椅 R
3 3 3
4 黑 黑
4 4 黑 +
R4 K36 YL15P 座椅 L
DATA1 1
XH8P
1
白红 白红
1 1
白红 白红
CON2
1
XH11P
1 DATA1
XH3P
SHOCK SIGNAL 1
CON1
1
白
YLR-04V
白
5 5
6 6
白 座椅喇叭、震动部分
白蓝 白蓝 白蓝 白蓝 红
CLK1 2 2
白绿 白绿
2 2
白绿 白绿
2 2 CLK1 SHOCK SIGNAL 3 3 红 红
7 7
LATCH1 3 3 3 3 3 3 LATCH1 黑 黑 黑 F3 XH4P
黄 黄 黄 黄 GND 2 2 8 8 白
DATA2 4 4 4 4 4 4 DATA2 2芯屏蔽线 芯线24＃ 1 1 R IN
仪表板灯板 紫 紫 紫 紫
 DATA3 5
6
5
6
橙
5 5
6 6
橙 黑
5
6 6
5 DATA3 红
4
2 2 GND
4 L IN T2 
控台部分 NC
DC12V 7 7
橙 黑
7 7
黑 橙
1
K19 白红
8
GND
8 DATA4 震动喇叭 椅背
黑
3 3 GND VH6P F1
黑
200VA 变压器
AC16V AC110V 白
K13 YLR-03V
黑 黑 黑 白蓝 AC16V 1 1 1
GND 8 8 8 8 2 9 9 CLK2 XH5P CON7 F3 VH4P 绿黄
R5 XH6P
9 9 YLR-02V B3 白绿
紫
10
11
10 LATCH2
11 DATA5
DATA9 1 1 白
1 1 L+
0V 3
2 2
3
白
0V
灰
2
3
1/2 9
白红 白红 白红 CLK6 2 2 2 2 L+ AC16V 0V
DATA5 1 1 10 10 黑 黑 4 4
白蓝 7 7 GND LATCH6 3 3 3 3 L-
LATCH2 2 2 白蓝 11 11
白蓝
GND 4 4 4 4 L- 5 5 FG
白绿 白绿 白绿 黑
CLK2 3 3 12 12 NC 5 5 AC16V 6 6
紫 紫 紫 K32 YL2P F4 VH4P
DATA4 4 4 13 13
BOOST灯板 5 5
橙 橙
14 14
橙 红
1 1
红 红
1 1 R+
DC12V
GND 6 6
黑 黑
15 15
黑 橙
黑
K20
1
黑
B4 黑 2 2 黑
黑
2
3
2 R+
3 R-
2
震动喇叭 椅座 4 4 R-
P5 YL4P YLR-02V 5557-24R CON9
绿 5557-22R 红
DOWN 1 1 绿 CON10 +12V 1 1 C6
紫 1 1 GND
UP 2 2 紫 O-UP 2 2
波棍 黑
3 3
黑 2 2 KEY-UP
O-DOMN 3 3
黑 黑 3 3 KEY-LEFT Z1 SM2P
4 4 O-LEFT 4 4 黑 黑红
1 1
4 4 KEY-START 橙 转向灯
2 2 红
 棕
紫
5
6
5 KEY-BOOST R
6 D-UP
O-RINHT 5
O-START 6
5
6
紫 Z2 SM2P

K42 YL6P O-VIEW 7 7 C5 K40 YL9P 黑 黑红
棕 棕 白 红 黑 黑 1 1
SW 黑
1 1
2 2
黑
C9 7
8
7 COIN-SENSOR
8 INPUT2
O-BOOST-R 8
O-BOOST-G 9
8
9
绿
C1
C2
橙
9
1
9
1
橙
橙
2 2 红 转向灯 1/2座椅灯饰部分
红 红 蓝 橙
3 3 C1 黄
9 9 INPUT4
O-BOOST-B 10 10 C3 2 2 橙 P1 SM2P
绿 绿 10 10 CARD IN 橙 橙 橙 橙
4 4 C2 黑 O-BRAKE LED-1 11 11 4 4 1 1
LED（红） 蓝 蓝 11 11 GND 橙 橙 橙 紫 紫
5 5 C3 黑 +12V 12 12 C4 3 3 2 2
橙 橙 12 12 GND 橙 橙 橙
6 6 C4 +12V 13 13 C7 6 6 P2 SM2P 排气管灯 R
13 13 KEY-DOWN 紫 橙 橙 橙 橙
CARD SWITCH 14 14 C8 5 5 1 1
LED（绿） 紫 紫
绿
14 14 KEY-RIGHT
OUTPUT-8 15 15 7 7 紫 2 2
紫
15 15 KEY-VIEW 绿 绿
OUTPUT-7 16 16 8 8 P3 SM2P
16 16 KEY-BOOST L D1 橙 橙
LED（蓝） 绿 OUTPUT-6 17 17 1 1
17 17 D-DOWN 绿 绿
OUTPUT-5 18 18 2 2
BOOST按键 18 18 INPUT1 排气管灯 L
OUTPUT-4 19 19
紫 P4 SM2P
19 19 INPUT3 橙
1 1 橙
OUTPUT-3 20 20
绿
20 20 INPUT5 绿 绿
绿 OUTPUT-2 21 21
黑
2 2
K41 YL4P 21 21 CARD SENSOR
绿 绿 黑 OUTPUT-1 22 22
1 1 22 22 GND 灰
SW 黑 黑 O-BRAKE LED-2 23 23
 灰
2
3
2
3
灰
C5
X1 XH7P
5 5
红 红
CON6
1
XH7P
1 COL
+12V 24 24
橙

3芯屏蔽线 芯线24＃

橙 COL 3 3 XH4P CON13 T5 YL4P 3芯屏蔽线 芯线24＃ T6 PHDR-10VS
4 4 橙 C6 1 1
绿 绿
2 2 COL 橙 橙 橙 橙
LED（红）
COL 2 2 12V 1 1 4 4 1 1 橙
蓝 蓝 紫 绿 绿
COL 1 3 3 3 3 COL 1 3 3 绿
5 5 绿
VIEW按键 紫 紫 QEPA(方向盘) 2 2
ROW 4 4 4 4 4 ROW 4 绿 紫 紫 紫 NS
灰 灰 QEPB(方向盘) 3 3 2 2 7 7 紫
ROW 3 6 6 5 5 ROW 3 黑 黑 黑 黑
棕 棕 GND 4 4 1 1 9 9
ROW 2 7 7 6 6 ROW 2 方向盘 磁力式VR
白 白 K49 YL2P
ROW 1 2 2 7 7 ROW 1 马达
红 红

M- M+
10KΩ 1/4W T3 XHP-5 1 1
红 数字按键
1 1 R 读卡机 T1 XH5P
黑
2 2
黑
绿 CON4 HIF3BA-14D-2.54C
B R G 2 2 G 橙
10KΩ 1/4W 橙 DC12V 1 1 C7 绿
3 3 12V 紫 1 1 DRIVER A
CARD SWITCH 2 2 C8 紫
4 4 NC 黑 2 2 DRIVER A_
GND 3 3 蓝
5 5 NC 绿 3 3 DRIVER B
三色LED灯 CARD SENSOR 4 4 黄
USB-A 黄 4 4 DRIVER B_
1/2 8 USB CARD-IN 5 5

 马达板（2/2） 
COM23 HIF3BA-14D-2.54C VH5P COM22
紫 MOTOR A 1 1
1 1 DRIVER A
绿 MOTOR A 2 2
2 2 DRIVER A_
黄 NC 3 3
3 3 DRIVER B
蓝 MOTOR B 4 4
4 4 DRIVER B_
MOTOR B 5 5 2/2

1 2 3 4 5 6 7 8

103
9. After-sales Service
Honorable customer

Thank you for purchasing our product

For your benefits, if you find any fault during the operation of the
product, please use a technician who obtains a certificate related
to mechanical engineering, electrical engineering or who engages
in routine maintenance, repair and management of amusement
machine to check the machine and inform us the fault in a timely
manner. Our company will take corresponding measures to assist
you to solve the problem promptly.

NOTICE Do not dismount or replace any part of the machine without

our technician’s permission, or you will solely undertake the
consequence
Please pay attention to our contact information as follow:

GuangZhou Wahlap Technology Limited

The specifications and operation instructions in this Manual are subject
to change without notice for reasons such as performance.