At the end of this document you will find links to products related to this catalog.
You can go directly to our shop by
clicking HERE. HERE
TEmperature
CONTROLLERS
sensor
TH-T SERIES
The TH-T temperature controller
series offers a complete range of
solutions able to satisfy many varied
industrial automation needs, including
basic models suitable for more simple
and cost-effective applications and
advanced models created specifically
for the more evolved control and
interface systems.
Programming of the temperature
controllers is quick and easy as the
most frequently-used configurations can
be set with few keyboard operations.
Models with a RS485 serial interface
can send the parameter configuration
and receive the controlled values
through an industrial PC that can
control different units.
Versions with a current transformer
input, available as an accessory for
measurements reaching 25 or 100 A,
can detect even a partial load failure,
as for example due to a broken heating
element.
The series includes models with opto-
isolated relay and transistor outputs to
control static relays, as well as models
with 4-20 mA or 0-10 V normalised
proportional analogue outputs.
HIGHLIGHTS APPLICAtion
• Complete range including basic and Packaging lines
advanced control functions
• Relay output, static output for SSR,
4-20 mA and 0-10 V analogue
outputs
• Models with current transformer
input and HBA function
• Models with RS485 serial interface
for MODBUS-RTU protocol
Process control
www.automation.datalogic.com
DIMENSION
The temperature controllers are easily
programmed by the 4 push-buttons 48 9,5 98
and display indicators present on the
front panel, or via the RS485 serial
interface. Additionally the accessory
device, as compact as a car key,
copies the same configuration onto
44,5
48
different temperature controllers.
The ‘T’ push-button rapidly activates
the Auto-Tuning function when
the temperature increases and
reaches the set value, alongside the
continuous Self-Tuning of the PID
control parameters.
INDICATORS AND SETTINGS
Single-display panel
a P push-button for programming
access and confirmation
I E B Down push-button for value decrease
H / parameter selection
J
F C Up push-button for value increase /
G
parameter selection
D A
C B D T push-button for Auto-Tuning and
Double-display panel
Self-Tuning activation
E Out1 LED for main output 1 ON
status indication
F Out2 LED for auxiliary output 2 ON
status indication
G SET LED for programming access
indication (blinking)
H AT-ST LED Auto-Tuning (blinking)
Terminal block
and Self-Tuning (on)
I PV display for process value
indication
J SV display for set value indication
(only TH-TD vers.)
CONNECTIONS
Amperometric
transformer
Programming device
Note: For correct installation and use Datasensor SpA can guarantee only the
data indicated in the instruction manual supplied with the products.
Versions and options: refer to MODEL SELECTION TABLE
296
www.automation.datalogic.com
TECHNICAL DATA
BASIC MODELS ADVANCED MODELS
TH-TD-00-RS
TH-TD-10-RS
TH-TD-01-RS
TH-TD-00-HB
TH-TD-10-HB
TH-TD-01-HB
TH-TD-11-RS
TH-TD-11-HB
TH-TD-00
TH-TD-10
TH-TD-01
TH-TD-03
TH-TD-13
TH-TD-04
TH-TD-14
TH-TS-00
TH-TS-10
TH-TS-01
TH-TD-11
TH-TS-11
Power supply: 24 Vac/Vdc ±10%, 50/60 Hz • • • • • • • • • •
100-240 Vac ±10%, 50/60 Hz • • • • • • • • • •
Consumption: 5 VA • ••••• • •
9 VA •••• ••• • ••• •
TC and RTD sensor input: J thermocouple; programmable for J/K/S thermocouples,
Pt100W/0°C RTDs, J/K I.R. sensors
• ••••• • ••••• ••• • ••• •
PTC and NTC thermistor input: PTC KTY81-121 990W/25°C, NTC 103AT-2 10kW/25°C •••• ••• • ••• •
Measurement scale: from -1999 to +9999 °C/°F, progammable lower and upper
scale limits, with sensor break detection
• • • • • • • ••••• ••• • ••• •
Precision: ±0.5% f.s. • • • • • • • •
±0.15% f.s. •••• • • • • • • • •
Refresh time: every 125 ms, display digital filter programmable from 0 to 20 sec. • • • • • • • ••••• • • • • • • • •
Data retention: non volatile eeprom memory • • • • • • • ••••• • • • • • • • •
Zero and span correction: 0°C; programmable offset from -1999 to +9999 °C/°F, with
measurement line rotation from 0000 to 2000 (gain correction)
• • • • • • • ••••• • • • • • • • •
Set Point number: 1 control point; programmable from 1 to 4 set points • • • • • • • ••••• • • • • • • • •
Setting value: 0°C; programmable from -1999 to +9999 °C/°F • • • • • • • ••••• • • • • • • • •
1st main point function: control ; programmable also as alarm point (see alarm action) • • • • • • • ••••• • • • • • • • •
1st main point action: inverse PID; programmable as inverse (heating) or direct • • • • • • • ••••• • • • • • • • •
(cooling), symmetrical or asymmetrical on/off, PID single or
double action with Auto-Tuning and Self-Tuning
1st main point output type: SPST-NO relay 250 Vac 5 A •• •• •• ••
transistor 12 Vdc 7 mA •• •• •• ••
4-20 mA analogue ••
0-10 V analogue ••
2nd auxiliary point function: alarm; programmable also as control point (see control action) ••••••••••••••••••••
2nd auxiliary point action: absolute maximum alarm; programmable as minimum, ••••••••••••••••••••
maximum or window, absolute or relative setting,
with stand-by, delay and latch functions
2nd auxiliary point output type: SPST-NO relay 250 Vac 5 A • • • •
• • • • • • • • • • • • • • • •
Overshoot control factor: 0.5; programmable from 0.00 to 2.00 (fuzzy control) • • • •
• • • • • • • • • • • • • • • •
Proportional band: 50°C; programmable from 0 to 9999 °C/°F • • • •
• • • • • • • • • • • • • • • •
Integral time: 200 sec.; programmable from 0 to 9999 sec. • • • •
• • • • • • • • • • • • • • • •
Derivative time: 50 sec.; programmable from 0 to 9999 sec. • • • •
• • • • • • • • • • • • • • • •
Cycle time: 20 sec.; programmable from 0.1 to 130.0 sec. • • • •
• • • • • • • • • • • • • • • •
On/off hysteresis: 1°C; programmable from -1999 to 9999 °C/°F • • • •
• • • • • • • • • • • • • • • •
Set point timing: inactive; programmable from 0:00 to 99:59 hours:minutes • • • •
• • • • • • • • • • • • • • • •
Soft Start timing: inactive; programmable from 0:1 to 7:59 hours:minutes with
Soft Start power adjustable from -100 to +100%
• • • •
• • • • • • • • • • • • • • • •
Serial communication interface: RS485 interface, MODBUS-RTU protocol, 1200-38400 baud • • • •
Loop break alarm: LBA software function for sensor break or short-circuit ••••••••••••• • • • ••••
and load interruption detection, with intervention time setting
from 0 to 9999 sec. alarm output activation possibility
Heater break alarm: HBA hardware function with 25/0.05 A or 100/0.2 A
current transformer input
• • • •
Connection: terminal block with 2.5 mm≈ screw contacts • • • • • • • • • • • • • • • • • • • •
Electrical protection: class II - front panel, installed according to instructions • • • • • • • • • • • • • • • • • • • •
Mechanical protection: IP54 - front panel, installed according to instructions • • • • • • • • • • • • • • • • • • • •
Housing material: UL 94 V0 self-extinguishing plastic • • • • • • • • • • • • • • • • • • • •
Weight: 225 g • • • • • • • • • • • • • • • • • • • •
Operating temperature: 0…+50°C, with 30…95 rH% non condensing humidity • • • • • • • • • • • • • • • • • • • •
Storage temperature: -10…+60°C • • • • • • • • • • • • • • • • • • • •
Reference standard: EN 61010-1 • • • • • • • • • • • • • • • • • • • •
297
MODEL SELECTION AND ORDER INFORMATION
MODEL DISPLAY POWER SUPPLY MAIN OUTPUT ADVANCED FUNCTION ORDER N°
TH-TS-00 single 24 Vac/Vdc relay basic 95B030000
TH-TS-10 single 100-240 Vac relay basic 95B030010
TH-TS-01 single 24 Vac/Vdc transistor basic 95B030020
TH-TS-11 single 100-240 Vac transistor basic 95B030030
TH-TD-00 double 24 Vac/Vdc relay basic 95B030040
TH-TD-10 double 100-240 Vac relay basic 95B030050
TH-TD-01 double 24 Vac/Vdc transistor basic 95B030060
TH-TD-11 double 100-240 Vac transistor basic 95B030070
TH-TD-03 double 24 Vac/Vdc 4-20 mA analogue out 95B030080
TH-TD-13 double 100-240 Vac 4-20 mA analogue out 95B030090
TH-TD-04 double 24 Vac/Vdc 0-10 V analogue out 95B030100
TH-TD-14 double 100-240 Vac 0-10 V analogue out 95B030110
TH-TD-00-RS double 24 Vac/Vdc relay RS485 95B030120
TH-TD-10-RS double 100-240 Vac relay RS485 95B030130
TH-TD-01-RS double 24 Vac/Vdc transistor RS485 95B030140
TH-TD-11-RS double 100-240 Vac transistor RS485 95B030150
TH-TD-00-HB double 24 Vac/Vdc relay HBA * 95B030160
TH-TD-10-HB double 100-240 Vac relay HBA * 95B030170
TH-TD-01-HB double 24 Vac/Vdc transistor HBA * 95B030180
TH-TD-11-HB double 100-240 Vac transistor HBA * 95B030190
* Heater Break Alarm: load failure detection (eg. heating elements) through external current transformer, which can be ordered as an accessory.
ACCESSORY SELECTION AND ORDER INFORMATION
MODEL DESCRIPTION ORDER N°
THT-AT-25 25/0.05 A current transformer for HBA function 95A301010
THT-AT-100 100/0.2 A current transformer for HBA function 95A301020
THT-KEY Device for copying the same programming to 95A301030
different temperature controllers
UNI EN ISO9001
The company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo
variations without prior notice. For correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the
products.
298
www.automation.datalogic.com
Below is a list of articles with direct links to our shop Electric Automation Network where you
can see:
• Quote per purchase volume in real time.
• Online documentation and datasheets of all products.
• Estimated delivery time enquiry in real time.
• Logistics systems for the shipment of materials almost anywhere in the world.
• Purchasing management, order record and tracking of shipments.
To access the product, click on the green button.
Product Code Reference Product link
THT-AT-25 HB AMP. TRANSFORMER 25/0.05A 95A301010 THT-AT-25 Buy on EAN
THT-AT-100 HB AMP. TRANSFORMER 100/0.2A 95A301020 THT-AT-100 Buy on EAN
THT-KEY THT PROGRAMMING KEY 95A301030 THT-KEY Buy on EAN
TH-TS-00 24 VAC/VDC RELAYS OUT 95B030000 TH-TS-00 Buy on EAN
TH-TS-10 100-240VAC RELAYS OUT 95B030010 TH-TS-10 Buy on EAN
TH-TS-01 24 VAC/VDC TRANS/RELAY OUT 95B030020 TH-TS-01 Buy on EAN
TH-TS-11 100-240VAC TRANS/RELAY OUT 95B030030 TH-TS-11 Buy on EAN
TH-TD-00 24 VAC/VDC RELAYS OUT 95B030040 TH-TD-00 Buy on EAN
TH-TD-10 100-240VAC RELAYS OUT 95B030050 TH-TD-10 Buy on EAN
TH-TD-01 24 VAC/VDC TRANS/RELAY OUT 95B030060 TH-TD-01 Buy on EAN
TH-TD-11 100-240VAC TRANS/RELAY OUT 95B030070 TH-TD-11 Buy on EAN
TH-TD-03 24 VAC/VDC 4-20mA RELAY OUT 2 95B030080 TH-TD-03 Buy on EAN
TH-TD-13 100-240VAC 4-20mA RELAY OUT 2 95B030090 TH-TD-13 Buy on EAN
TH-TD-04 24 VAC/VDC 0-10V RELAY OUT 2 95B030100 TH-TD-04 Buy on EAN
TH-TD-14 100-240VAC 0-10V RELAY OUT 2 95B030110 TH-TD-14 Buy on EAN
TH-TD-00-RS 24 VAC/VDC RELAYS OUT RS485 95B030120 TH-TD-00-RS Buy on EAN
TH-TD-10-RS 100-240VAC RELAYS OUT RS485 95B030130 TH-TD-10-RS Buy on EAN
TH-TD-01-RS 24 VAC/VDC TR/REL OUT RS485 95B030140 TH-TD-01-RS Buy on EAN
TH-TD-11-RS 100-240VAC TR/REL OUT RS485 95B030150 TH-TD-11-RS Buy on EAN
TH-TD-00-HB 24 VAC/VDC RELAYS OUT HB-TA 95B030160 TH-TD-00-HB Buy on EAN
TH-TD-10-HB 100-240VAC RELAYS OUT HB-TA 95B030170 TH-TD-10-HB Buy on EAN
TH-TD-01-HB 24 VAC/VDC TR/REL OUT HB-TA 95B030180 TH-TD-01-HB Buy on EAN
TH-TD-11-HB 100-240VAC TR/REL OUT HB-TA 95B030190 TH-TD-11-HB Buy on EAN
