Scribd
Upload
31 views4 pages

ATEM Proxy

The SKAARHOJ ATEM Proxy allows for an increased number of SKAARHOJ controller clients to connect to various ATEM switchers, with specific client limits depending on the model. Users should ensure they are running the latest firmware version, currently v1.2, and can confirm connections and client statuses through specific messages displayed by the ATEM Proxy. Instructions for updating firmware and configuring IP settings are provided within the document.

Uploaded by

cconiac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views4 pages

ATEM Proxy

The SKAARHOJ ATEM Proxy allows for an increased number of SKAARHOJ controller clients to connect to various ATEM switchers, with specific client limits depending on the model. Users should ensure they are running the latest firmware version, currently v1.2, and can confirm connections and client statuses through specific messages displayed by the ATEM Proxy. Instructions for updating firmware and configuring IP settings are provided within the document.

Uploaded by

cconiac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ATEM Proxy

Device: ATEM PROXY

Introduction
The SKAARHOJ ATEM Proxy offers a way to expand the number of connected SKAARHOJ controller
clients to an ATEM switcher.

See this presented here: https://www.youtube.com/watch?v=ApYouYfX5G4 (investigation are old -


number of clients might depend on Firmware Version)

- ATEM Production Studio 4K (5 clients)

- ATEM Television Studio (5 clients)

- ATEM 2 M/E (7 clients)

Update 19.09.14

ATEM 4K 1 M/E (6 clients)

ATEM 1 M/E (5 clients)

Update 23.11.14

ATEM 4K 2 M/E (8 clients)

1
ATEM Proxy

Confirming ATEM Proxy Firmware Version

First ensure you are running the latest firmware version for the ATEM Proxy. Acquire information with us
directly for latest Firmware version. As of writing this document the latest version is v1.2.

Check this by connecting a monitor to the HDMI output of the ATEM Proxy. It is suggested to power off
the ATEM Proxy prior to connecting a HDMI monitor for the ATEM Proxy to discover the monitor. Below is
a screenshot of the boot up process for the ATEM Proxy. Notice the message “SKAARHOJ ATEMProxy
v1.2”. This states the version number of the ATEM Proxy.

Updating Firmware

Please acquire with us for the latest firmware image. Follow the instructions here: https://github.com/
kasperskaarhoj/SKAARHOJ-Open-Engineering/raw/master/Manuals/Files/
ATEM_Proxy_Upgrade_Instructions.pdf

2
ATEM Proxy

Setting IP of ATEM Proxy and ATEM IP

Load the image onto a computer and find the file “IPConfig.txt” on the root of the SD card.

The ip is the IP address of the ATEM Proxy it self and this is the IP the SKAARHOJ controllers should
connect to when using the ATEM Proxy instead of connecting to the ATEM directly. The “atem” is the IP
address of the ATEM Switcher.

Confirming ATEM Proxy Connection

Connection between the ATEM Proxy and the ATEM Switcher can be confirmed with the message
“Switcher connection established”

Clients connecting to the ATEM Proxy have confirmation with “New connection: xxx.xxx.xx.xx:yyyyy” where
you can see the IP address of the clients connecting.

3
ATEM Proxy

Client Connection Status

Clients connecting to the ATEM Proxy are confirmed with the message “New connection” as stated above.
If a client are removed from the network the ATEM Proxy will state this with

“Client xxx.xxx.xxx.xx disappeared”

If the client is re-connecting to the ATEM Proxy this is stated with the usual “New connection” message.

You might also like