No.
MSDS : MSDS/SI – 005
Revision : 02
Effective Date : JAN 13, 2022
MATERIAL SAFETY
DATA SHEET
MSDS in accordance with UN GHS Purple Book
1. PRODUCT AND COMPANY IDENTIFICATION
Product Use : SIP INK – TGO INK SERIES
Product Description : Gravure Printing Inks
Manufacture’s Name : Inks type of surface ink, purpose for PP,PE,HDPE
Address : PT SANCHEM INDUSTRIAL PERTIWI
: Jl. Raya Tobat No.68 Balaraja - Tangerang
Telp. ( 62 21 ) 29508255 Fax. (62 21) 29508255
2. PRODUCT COMPOSITION
INGREDIENT INFORMATION CAS #
Ethyl Acetate 141-78-6
Methyl Benzene 108-88-3
Iso Propyl Alkohol 67-63-0
Polyamide Resin NA
Synthetic Wax 9002-88-88-4
Pigment NA
Dispersing Additive NA
No. MSDS : MSDS/SI – 005
Revision : 02
Effective Date : JAN 13, 2022
MATERIAL SAFETY
DATA SHEET
3. PHYSICAL & CHEMICAL PROPERTIES
Appearance : Opaque Colored Liquid
Solubility : Not soluble in water
Flash point, 0F : 550F
Specific Gravity : 0.90 + 0.20 g/cc
Percentage volatile : 55% - 65%
4. HAZARD IDENTIFICATION
HEALTH EFFECTS
Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.
ENVIRONMENTAL EFFECT
On the basis of available information, this product is not expected to produce any significant adverse
environmental effect when recommended use instruction are followed.
FIRE HAZARDS
Flammable liquid.
5. FIRST AID MEASURES
INHALATION
Remove affected person to fresh air and keep at rest. If breathing is irregular or stopped, administer
artificial respiration. Obtain medical advice immediately.
EYE CONTACT
Remove contact lenses. Flush eyes with clear running water for 15 minutes while holding eyelids open;
if irritation persists, seek medical attention.
SKIN CONTACT
Remove contaminated clothing. Wash skin through with soap and water. Do not use solvents or thinner.
If irritation persists, seek medical attention.
INGESTION
Give two glasses of water for dilution; seek medical attention.
No. MSDS : MSDS/SI – 005
Revision : 02
Effective Date : JAN 13, 2022
MATERIAL SAFETY
DATA SHEET
6. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
Carbon dioxide, water fog, dry chemical, chemical foam.
FIRE FIGHTING PROCEDURES
Self - contained respiratory equipment; cool containers to prevent pressure buildup and explosion when
exposed to extreme heat.
HAZARDOUS COMBUSTION PRODUCTS
Smoke, fumes, oxides of carbon.
7. ACCIDENTAL RELEASE MEASURES
STEP TO BE TAKEN IN CASE MATERIAL IS RELEASE OR SPILLED: CAUTION – FLAMMABLE -
Evacuate and ventilate area; confine and absorb into absorbent; place material into approved containers for
disposal; do not discharge into lakes, ponds, streams, or public waters.
8. HANDLING AND STORAGE
HANDLING
The product should be handled in a well – ventilated area. Keep container tightly closed. Isolated from
sources of heat, sparks and open flame. Smoking, eating and drinking should be prohibited in application
area. For personal protection see section 8. Never use pressure to empty: container is not a pressure
vessel.
STORAGE
Storage in closed container away from sources of heat in a well ventilated area.
No. MSDS : MSDS/SI – 005
Revision : 02
Effective Date : JAN 13, 2022
MATERIAL SAFETY
DATA SHEET
9. PERSONAL PROTECTION
RESPIRATORY PROTECTION
Wear suitable respiratory protection if exposure limits may be exceeded. Airline respirator or cartridge
respirator with appropriate filter.
HAND PROTECTION
Wear impermeable gloves.
EYE PROTECTION
Use safety eyewear designed to protect against splash of liquid (goggles)
SKIN PROTECTION
Wear suitable protective clothing.
10. STABILITY AND REACTIVITY
This preparation contains materials which are unstable under following condition ; exposure to heat (above 40
°C), strong UV-sources, free radical initiators, peroxides, strong alkalis or reactive metals. These could cause
the product to polymerize exothermally. Unintentional contact with them should be avoid.
11. TOXICOLOGY INFORMATION
Acute oral toxicity : Available
Irritant effect to skin : N/A
Irritant effect to eyes : Irritant
12. ECOLOGICAL INFORMATION
There is no data available on the preparation it self. Based on the chemical composition of the product is
assumed that the mixture can be treated in an acclimated biological waste treatment plant system in limited
quantities. However, such treatment should be evaluated and approved for each specific biological system.
None of the ingredients in the mixture are classified as Marine Pollutant.
13. DISPOSAL CONSIDERATIONS
Do not allow me drains of water courses. Wastes and emptied containers should be disposed of according to
local regulation. Do not flush to sanitary sewer or waterway.
No. MSDS : MSDS/SI – 005
Revision : 02
Effective Date : JAN 13, 2022
MATERIAL SAFETY
DATA SHEET
14. TRANSPORT INFORMATION
Road transport ADR/ RID : Non-hazardous goods
Marine transport : Non-hazardous goods
Air transport : Non-hazardous goods
15. REGULATORY INFORMATION
Hazards warning labeling not compulsory
16.OTHERS INFORMATION
This information is based on our present states knowledge. It should not therefore be construed as
guaranteeing specific properties of the products described or their suitability for – a particular application.
