GB

DATA S H E E T

con50
Linear In-line Actuator

Standard Specifications (Specifications for non-standard actuators, eg. HE-version, may vary)
Motor/Gear
24 VDC permanent magnet motor (max. current for ratio 4-14-17-24 is 8 A, ratio 49 is 7 A, ratio 84 is 4,5 A,
absolute max. voltage is 28 VDC)
Gear ratio 4 14 17 24 49 84
Maximum load [N] 500 1750 2200 3100 4500 4500
Speed at maximum load [mm/s] 70 20 17 12 6 4

12 VDC permanent magnet motor (max. current for ratio 4-14-17-24 is 16 A, ratio 49 is 14 A, ratio 84 is 9 A,
absolute max. voltage is 14 VDC)
Gear ratio 14 17 24 49 84
Maximum load [N] 1400 1700 2400 4500 4500
Speed at maximum load [mm/s] 14 10 6 3 3.5

Max. static load/ PA brackets: 4700 N Alu/Stainless steel: 16800 N

Self locking force Depending on stroke length for push-applications
Max. Load limited to 2000 N for stroke lengths > 400 mm
Temperature Operation: - 20 ˚C to + 70 ˚C Storage: - 40 ºC to + 70 ºC
Protection class IP66
Cable specification 1 m, 2 x 1.3 mm² (AWG16), Ø = 6.4 mm, black, Molex Mini-Fit Jr. 6 pin
Bending Radius 6 x cable diameter
Materials Motor and actuator tube are powder coated steel
Piston rod is stainless steel
Front and rear brackets are PA
Duty cycle Max. 10 % or 2 minutes in use followed by 18 minutes rest
Color Black (RAL 9005)
Stroke length/weight
Stroke [mm] 50 100 150 200 250 300 350 400 500 750
con50

Weight [kg] 2.1 2.3 2.6 2.8 3.1 3.3 3.6 3.8 4.3 5.6
Actual weight may vary depending on model and options selected

Options
Stainless steel versions (AISI 316) Version certified according to IEC60601-1, ANSI/
Brackets in aluminum or stainless steel AAMI/ES60601-1, CAN/CSA-22.2 No60601-1
Brackets with clevis available (24 VDC only)
Brackets with spherical bearings
Hall sensors for positioning and/or synchronization
HE (Harsh Environment) version (gear ratio 1:4 not
On Request
available) Tested according to IP68 and IP69 and Available in all RAL colors
passed the criteria for a depth of one meter for one Other stroke lengths available
hour. Test reports are available on request. Customised front and rear brackets
Low noise version
Customised build-in-dimensions
Spline and emergency lowering
Other cable lengths (1 - 9 m) Contact Concens for any special requirements

Check for updates at www.concens.com D ATA S H E E T | con5 0 | February 2021 | 1

 DATA S H E E T

VIEW2 ( 1 : 4 )
Speed/Force
Speed [mm/s]
4) 30
28
26 Ratio 1:4
24 Load 500 N, speed 70 mm/s
22
20 1:14
18
1:17
16
14 1:14
12
1:24

10 1:17
8

VIEW3 ( 1 : 4 ) 6 1:24 1:49

4 1:84
1:84

VIEW1 (1:491 : 4 )
2
0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000

12 V 24 V Load [N]
4)
Graphs are indicative only push / pull

Force/Current VIEW1 ( 1 : 4 )
Use in the dashed area is not recommended. Please contact Concens for further information.

Current @ 24 VDC [A] Current @ 12 VDC [A]

9.5 1:17 1:14 1:17 19
1:24
9 18
1:14
8.5
8
1:24 Build-in
1:49 Dimension BID
1:49
17
16
7.5 15
1:84
7 14
6.5 13
6 12
5.5
5
Build-in Dimension BID 11
10
4.5
Con35 9
4 8
3.5 7
3 6
2.5 5
Recommended max. current:
2 4
12 VDC = 16 A and 24 VDC = 8 A
Ø35

Ø20
Ø28

Con35 1.5 3
1 2
0.5 1
0 0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000
Graphs are indicative only 12 V 24 V 12 and 24 VDC Load [N] push / pull
Ø35

Ø20
Ø28

Build-in Dimension BID

Dimensions
con50

Axial backlash: Build-in Dimension BID

+/- 0.5 mm
Con50
General
dimensional
variation:
+/- 1 mm
Ø50

Ø30
Ø40

Con50

Build-in Dimension BID

Ø50

Ø30
Ø40

IEC/ANSI/AAMI/
Harsh Emergency
Gear Ratio Standard Clevis Rear Hall ES/CAN/CSA-
22.2 No 60601-1 Enviroment lowering/spline

4, 14, 17, 24 240 mm + stroke - Build-in

+ 15 mm Dimension
+ 15 mm BID+ 14 mm
+ 23 mm/+ 6 mm
49, 84 255 mm + stroke - + 15 mm + 15 mm + 14 mm
Stroke lengths > 750 mm + 100 mm (On request)

Build-in Dimension BID

2 | D A T A S H E E T | con5 0 | February 2021 Con60
 DATA S H E E T
2525 25 2525 25 2525 25 2525 25

+0,2 +0,2 +0,2 +0,2

0,2
- 0,0
Ø16 - 0,0
0,2
16 - 0,0 - 0,0 - 0,0
2525 25

+0,2 +0,2 +0,2 +0,2

0,0
- 0,2
Ø16 - 0,0
0,2
0,0 - 0,0 - 0,0
2525 25 2525 25
+0,2 +0,2 +0,2 +0,2
- 0,0
0,2
Ø16 - 0,0
0,2
0,2 - 0,0 - 0,0

+0,2 +0,2
0,2
- 0,0
Ø16 - 0,0
0,2
0,2 - 0,0 - 0,0
+0,2 +0,2 +0,2 +0,2
- 0,2
0,0
Ø16 - 0,0
0,2
+0,2 - 0,0 - 0,0
0,2 +0,2 +0,2
- 0,0
0,2
Ø16 - 0,0
0,2
0,2 - 0,0 - 0,0
2525 25

0,2 +0,2 +0,2

- 0,0
0,2
Ø16 - 0,0
0,2
Ø16 - 0,0
+0,2 +0,2 +0,2 +0,2
0,2
- 0,0
Ø16 - 0,0
0,2
0,2 - 0,0 - 0,0

Ø16 +
0,2 +
Ø16 +
0,2 +
Ø16 +
0,2 +

Ø16 +
+0,2 +0,2 +
Ø16 +
0,2 +

Ø16 +
0,2 +

Ø16 +
0,2 +
2525 25

Ø16 +
0,2 +
2525 25 2525 25 2525 25

16
16
16 Ø16

16
16 Ø16

16 Ø16

16

0,2
- 0,0
16 - 0,0
2525 25

0,0
16 - 0,2
16 - 0,0
2525 25 2525 25
- 0,0
0,2
16 - 0,0

0,2
- 0,0
16 - 0,0
- 0,2
0,0
16 - 0,0

- 0,0
0,2
16 - 0,0
2525 25

- 0,0
0,2
16 - 0,0
Ø16 - 0,0
0,2
- 0,0
16 - 0,0

Ø
Ø

Ø
Ø
Standard Brackets 2525 25 25

16 +
0,2 +
2525 25 25 2525 25 25

+0,2 +
0,2 +
16 +
0,2 +

2525 25 25

16 +
16 +
+0,2 +

16 +
0,2 +

16 +
+
16 +
0,2 +

16
16 -Ø0,0
0,2
16 -Ø0,0

0,2
16 - 0,0
2525 25 25

16
16 -Ø0,0
16 -Ø0,0
- 0,2
0,0
2525 25 25

16
2525 25 25
16 -Ø0,0
0,2
16 -Ø0,0
16 -Ø0,0
0,0 - 0,0

16 +- 0,2
- 0,2
0,0
16 -Ø0,0
- 0,0
Ø16 Ø16 - 0,0
16 -Ø0,0
+0,2
16 -Ø0,0
16 -Ø0,0
-Ø0,0
- 0,0
0,2
16 -Ø0,0
16 -Ø0,0
0,0 - 0,0

16
2525 25 25

0,0
0,2
Ø0,0
0,2
- 0,0
0,2
- 0,0 - 0,0
16 -Ø0,0
0,2
16 -Ø0,0
- 0,0
16 --Ø0,0

Ø
Ø
2525 25 25 1515 15

0,2 +
0,2 +
0,2 +
Ø

12,3
12,3
12,3

+
0,0 +
2525 25 25 1515 15
0,2 +
0,2 +
0,2 +

- 0,2 +

+
16 +
0,2 +
0,2 +
0,2 +

16 +
0,2 +
+
0,2 +
2525 25 25 1515 15 2525 25 25 1515 15

0,2 +
0,2 +
0,2 +

12,3
12,3
12,3
-

16
16

16

16

+0,0
+0,0
+0,0
0,0
2525 25 252525 25

16

16

16
12,3Ø16
16
16

0,0
+0,2
0,0
0,2
0,2
0,0
2525 25 252525 25 2525 25 252525 25
+0,0
+0,0
+0,0

+0,2
0,0
6,212,3 12,3+0,20,0
0,2
+0,0
12,3 12,3 12,3- 0,0
+0,2
0,0
+0,2
0,0
+0,2
0,0
0,2
0,0
+0,0
+0,0
+0,0
2525 25 252525 25

0,2
+0,0
0,0
0,2
- 0,0
+0,0
0,0
+0,0
0,0

Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø

16 +-Ø
Ø16 - Ø
16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø
Ø16 -- Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø

Ø16 -- Ø
Ø

Ø
Ø16 - Ø
-Ø
Ø16 - Ø
Ø
1515 15

+
Ø16 +

Ø16 +

+
+
12,3

12,3
+
1515 15

-
1515 15

Ø12,3
1515 15

Ø16
40 12,3 12,3Ø16
40 12,3 12,3Ø16
12,3 12,3Ø16
16
2525 25 2525 25 2525 25 2525 25

Ø
Ø
1515 15 15

12,3 12,3
1515 15 15 1515 15 15

6,212,3

12,3 12,3
1515 15 15
2525 25 25 2525 25 25 2525 25 25 2525 25 25

6,2 6,2
6,2 6,2
6,2 6,2
6,2
6,2
6,2

6,2
6,2
6,2
6,2
1515 15 15 1515 15 15 1515 15 15

40 12,3
6,2 6,2 12,3
1515 15 15
2525 25 25 2525 25 25 2525 25 25 2525 25 25
6,2
6,2
6,2

6,2
6,2
6,2
6,2 6,2
6,2 6,2
40
40
40

20
20
20
40
40
40

20
20
20
40

20
20
20
40
40

20
20
20
6,2
6,2
206,2
6,2
6,2
6,2
6,2
6,2

6,2 6,2
6,2 6,2
6,2
6,2 6,2
6,2
40
40
40

20
20
20
40
40
40

20
20
40
40
40

20
20
20
40
40
40

6,2 20
20 20
20 20
Polyamid
Polyamid
Polyamid
(PA)
(PA)(PA) PAPA
with
PA
withwith
clevis
clevis
clevis 6,2 Alu
AluAlu Alu
Alu
with
Alu
withwith
clevis
clevis
clevis
6,2
6,2
6,2
6,2
6,2
6,2
6,2

6,2
6,2
6,2
6,2
Max.
Max.Max.
static
static
static
load
load4700N
load
4700N
4700N Max.
Max.Max.
static
static
static
load
load
4700N
load
4700N
4700N Max.
Max.
Max.
static
static
static
load
loadload
40
40
40
40

20
20
20
40
40
20
40
40

20
20
20
40
20
40
40
40

20
20
20
40
20
40
40
40

20

20
Max.
Max.
Max.
static
static
static
load
loadload
Max
Maxload
Max
Polyamidload
Polyamid 3100N
load
Polyamid 3100N
(PA) 3100N
(PA)(PA) Max
PAMax
PA load
Max
with
PAload
with3100N
load
with3100N
clevis 3100N
clevis
clevis 16800N
16800N
Alu
Alu16800N
Alu 16800N
16800N
16800N
Alu
Alu
with
Alu
withwith
clevis
clevis
clevis
(gear
(gear
(gear
ratio
ratio
1:24)
ratio
1:24)
1:24) (gear
(gear
(gear
ratio
ratio
1:24)
ratio
1:24)
1:24)
40
40
40
40

20
20
20
40
40
20
40
40

20
20
20
40
20
40
40
40

20
20
20
40
20
40
40
40

20
20
20
20
Max.
Max.Max.
static
static
static
load
load4700N
load
4700N
4700N Max.
Max.Max.
static
static
static
load
load
4700N
load
4700N
4700N Max.
Max.
Max.
static
static
static
load
loadload Max.
Max.
Max.
static
static
static
load
loadload
Polyamide
Polyamid
Max
Maxload
Max(PA)
Polyamid
Polyamid
Polyamid
load (PA)
3100N
load (PA)
3100N(PA)
3100N (PA) PAPA
with
PA
Max with
Max PA
load
Maxclevis
with
PA
with
clevis
load
3100N
loadclevis
withclevis
3100N clevis
3100N Alu
Alu
Alu16800N
AluAlu
16800N
16800N Alu
AluAlu
with
Alu
16800N with
with
16800N Alu
with
clevis
16800N clevis
clevis
with
clevis
clevis
Max. Max.
static
Max.
(gear load
static
Max.
(gear static
Max.
(gear
ratio 4700
static
load
ratio load
static
1:24)
ratio 4700N
load
1:24) N
4700N
1:24)load
4700N Max.
4700N static
Max.
Max.
(gear static
Max.
(gear
(gear
ratio load
static
Max.static
load
ratio
1:24)
ratio 4700
load
static
4700N
load
1:24)
1:24) N4700N
4700N
load
4700N Max.
Max.
Max. static
Max.
static
Max.
staticstatic
load
load
static
load load
load Max. Max.
Max.
static
Max. static
static
Max.
static
load
static
load load
loadload
Max. MaxMax
load load
Max
Polyamidload
3100Max
Polyamid3100N
load
Polyamid 3100N
load
N
Polyamid
(PA) 3100N
(PA) 3100N
(PA) (PA) Max
PAMax
Max. load
Max
load
PAwith
PAload
Max
with3100N
load
3100
PA
with 3100N
clevisload
3100N
3100N
Nclevis
clevis
withclevis 16800N
16800N
Alu
Alu
1680016800N
Alu 16800N
Alu
N 16800N
16800N
Alu
Alu16800N
16800N
16800
with
Alu
with
Alu
with
clevisNclevis
clevis
with clevis
(gear(gear
(gear
Max. (gear
Max.
ratio ratio
(gear
ratio
static
Max. 1:24)
ratio
static
Max.
1:24) 1:24)
ratio
static
load 1:24)
load
static
4700N
load1:24)
4700N
load
4700N
4700N (gear
(gear
Max.
Max.
(gear (gear
ratio
ratio (gear
ratio
static
Max. 1:24)
static
Max. ratio
1:24)
ratio
static
load
1:24) load1:24)
static
4700N
load1:24)
4700N
load
4700N
4700N Max.
Max.
static
Max.
static
Max.
static
load
load
static
load
load Max.
Max.
static
Max.
static
Max.
static
load
static
loadloadload
Max
Max
load
Max
load
Max
3100N
load
3100N
load
3100N
3100N Max
Max
load
Max
load
Max
3100N
load
3100N
load
3100N
3100N 16800N
16800N
16800N
16800N 16800N
16800N
16800N
16800N
(gear
(gear
(gear
ratio
(gear
ratio
251:24)
ratio
1:24)
ratio
1:24)
1:24) (gear
(gear
(gear
ratio
(gear
ratio
25 1:24)
25ratio
1:24)
25ratio
1:24)
1:24) 2525 25
0,0 +- 0,000
0,000
- 0,008
Ø12 - 0,008
0,000
- 0,008- 0,008

25 25

+0,000+0,000
0,000
0,000
- 0,008
Ø12 - 0,008
Ø12 - 0,008
+0,2 +0,2 +0,2 +0,2
0,2
- 0,0
Ø16 - 0,0
0,2
0,2 - 0,0 - 0,0

2525 25
+0,2 +0,2 +0,2 +0,2
0,0
- 0,2
Ø16 - 0,0
+0,2
0,0
- 0,2
0,2
- 0,0
0,2
- 0,0
0,2 - 0,0 - 0,0

+0,2 +0,2 +0,2 +0,2

0,2
- 0,0
Ø16 - 0,0
0,2
0,0

2525 25 2525 25
Ø16 +
0,2 +

Ø16 +

0,0 +
Ø16 +
0,2 +

Ø16 +
0,2 +

Ø12 +
+0,000+

2525 25 2525 25

Ø12 +
+0,000+
0,2 +- 0,000
0,000
- 0,008
12 - 0,008

2525 25

0,000
- 0,008
0,008
12 - 0,008
16

16

16
16 Ø16

16

12
0,2
- 0,0
16 - 0,0

2525 25
0,0
16 - 0,2
16 - 0,0
0,2
- 0,2
0,2
- 0,0
- 0,0

0,2
- 0,0
16 - 0,0

2525 25 2525 25
Ø

2525 25 25 2525 25 25
0,2 +- 0,000
16 Ø0,008
- 0,000
12 -Ø0,008
+0,000
0,000
- 0,008
12 - 0,008
16 +
+0,2 +

+0,2 +
+
0,0 +
16 +
0,2 +

2525 25 25
16 +
0,2 +
12 +

+0,000
+0,000
+0,000
+0,000
12 -Ø0,008
0,008
12 -Ø0,008
0,008- 0,008
12 +
-
16

16
16 -Ø0,0
0,2
16 -Ø0,0
- 0,0
- 0,0

16

2525 25 25
16
16 -Ø0,0
16 -Ø0,0
0,2
- 0,2
16 -Ø0,0
0,2
- 0,0
-Ø0,0
- 0,0 - 0,0

16 -Ø0,0
0,2
16 -Ø0,0
0,0
0,0

12

2525 25 25 2525 25 25
12
Ø

Ø
12,3
12,3
12,3

Ø
12,3
12,3
12,3 12,3 12,3 12,3

2525
25 25 2525 2525
25 25
0,2 +

2525 2525 25 25
+
0,0 +
0,2 +
0,2 +
+

0,2 +
0,2 +

+
0,000
0,000
- 0,008
0,000
+0,008
0,000
+0,008
0,008

2525 25
+0,000
0,000
+0,000
0,000
+0,008
0,008
+0,008
-
16
16

16

16
16
16

16
12

12

2525 25 25 1515 15 2525 25 25 1515 15

+0,0
0,2
+0,0
0,2
- 0,0
0,0

12

12
0,0
+0,2
0,0
0,2
+0,2
+0,0
- 0,0
0,2
+0,0

+0,0
+0,0
0,0
0,0

2525 25 25 1515 15
Ø16 - Ø
Ø16 - Ø
Ø
12,3- Ø

Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
Ø
Ø16 - Ø
Ø

Ø16 - Ø
Ø16 - Ø
Ø16 - Ø
16 Ø
Ø12 - Ø
Ø12 - Ø
Ø12 - Ø

Ø12 - Ø
Ø12 - Ø
Ø12 - Ø
Ø12 - Ø
+

+
12,3 12,3 12,3
12,3

+
40 12,3 12,3 12,3
12,3

+
+

2525 25 2525 25 2525 25

40 12,3 12,3Ø16
12,3 12,3Ø16

16

16

Ø12

1515 15 1515 15 1515 15

Ø

Ø
12,3 12,3

12,3

12,3 12,3

2525 25 25 2525 25 25 2525 25 25

1515 15 15 1515 15 15 1515 15 15
6,2 6,2
6,2 6,2
6,2 6,2

6,2
6,2
6,2
12,3

2525 25 25 2525 25 25 2525 25 25

1515 15 15 1515 15 15 1515 15 15
6,2
6,2
6,2
40
40

20
20
20
40
40

20
20
20
40
40
40

20
20
20
6,2
6,2
6,2
6,2

6,2
6,2
6,2
6,2
40
40
40

20
20
20
40
40
40

20
20
20
40
40
40

20
20
20

Stainless steel Stainless steel Alu with spherical

6,2
6,2
6,2
6,2

6,2
6,2
6,2
6,2

Max. static loadsteel

Stainless
Stainless 16800
Stainless steelN
steel withStainless
clevis
Stainless
Stainless
steel
steel
steel bearings
Alu
Alu
with
Alu
with
with
spherical
spherical
spherical
40
40
40
40

20
20
20
20
40
40
40
40

20
20
40
20
40
20
40
40

20
20
20
20

Max.
Max.
Max.
static
static
static
load
load
load Max.with
with
with
clevis
static clevis
clevis
load 16800 N bearings
Max.bearings
bearings
static load 11000 N
16800N
16800N
16800N Max.
Max.
Max.
static
static
static
load
load load Max.
Max.
Max.
static
static
static
load
load
load
40
40
40
40

20
20
20
20
40
40
40
40

20
20
40
20
40
20
40
40

20
20
20
20

Stainless
Stainless
Stainless
steel
steel
steel Stainless
Stainless
Stainless
steel
steel
steel Alu
Alu
with
Alu
withwith
spherical
spherical
spherical
Max.
Max.
Max.
static
static
static
load
load
load 16800N
16800N
with 16800N
with
with
clevis
clevis
clevis 11000N
11000N
11000N
bearings
bearings
bearings
Stainless
Stainless
Stainless
16800N
16800N Stainless
16800N steel
steel
steel
steel Stainless
Stainless
Max. Stainless
Max.
Max. Stainless
static steel
static steel
static
load
loadsteel
steel
load Alu
Alu
Max.with
Alu
Max. with
Max.Alu
with
spherical
static
static spherical
with
static
load spherical
load spherical
load
Max.
Max.
static
Max.
static
Max.
static
load
load
static
load
load with
with
with
16800Nclevis
16800N clevis
with
16800N clevis
clevis bearings
bearings
bearings
11000N
11000N bearings
11000N
16800N
16800N
16800N
Stainless16800N
Stainless
Stainless
Stainless
steel
steel
steel
steel Max.
Max.
static
Max.
Stainlessstatic
Max.
Stainless static
load
Stainless load
static
Stainless
steel
steelload
load
steel
steel Max.
Max.
Alu
Alustatic
Max.
with
Alustatic
Max.
with
Alustatic
load
with load
static
sphericalloadload
spherical
with
spherical
spherical
Recommended Mounting Methods
Max.
Max.
static
Max.
static
Max.
static
load
load
static
load
load 16800N
16800N
with
Con50
Con5016800N
with
with
Con50 16800N
clevis
clevis
with
standard clevis
standard clevis
standard
brackets
brackets
brackets 11000N
11000N
11000N
bearings 11000N
bearings
bearings
bearings
16800N
16800N
16800N
16800N Max.
Max.
static
Max.static
Max.
static
loadload
static
load
load Max.
Max.
static
Max.
static
Max.
static
load
load
static
loadload
16800N
16800N
Con50
Con5016800N
Con50 16800N
standard
standard
standard
brackets
brackets
brackets 11000N
11000N
11000N
11000N

Con50
Con50
Con50
standard
Con50
standard
standard
standard
brackets
brackets
brackets
brackets

Con50
Con50
Con50
standard
Con50
standard
standard
standard
brackets
brackets
brackets
brackets
DIMENSIONS
DIMENSIONS
DIMENSIONS
AREARE
IN mm
IN
AREmm
IN mm NameNameName
DateDate Date
Productgroup:
Productgroup:
Productgroup:

Øresundsvej
Øresundsvej
Øresundsvej
7 7
GENERAL
GENERAL
GENERAL
TOLERANCES
TOLERANCES
Phone:
7 Phone:
TOLERANCES
IN IN IN Drawn
Drawn
Drawn
+4570111131
Phone:
sel sel sel
+4570111131
+4570111131 ACCORDANCE ACCORDANCE
Concens
Concens
ACCORDANCE
WITH
Concens
actuator
actuator
WITHWITH
actuator
parts
partsparts
Checked
Checked
Checked
14-10-2019
14-10-2019
14-10-2019
Productname:
Productname:
Productname:
con50
DK-6715
DK-6715 Esbjerg
DK-6715Esbjerg NFax:Fax:
NEsbjerg N +4576105010
Fax:
+4576105010
+4576105010ISO ISO 2768-mK
2768-mK
ISO 2768-mK
Denmark
Denmark Denmark Mail:Mail:Info@concens.com
Mail:
Info@concens.com
Info@concens.com DIMENSIONS
DIMENSIONS
DIMENSIONS
AREARE
IN mm
IN
AREmm Eng
IN mm Eng
Appr.Appr.
Eng
NameAppr.
NameName
DateDate Date
Productgroup:
Productgroup:
Productgroup:
Web: Web:ww.concens.com
Web: ww.concens.com
ww.concens.com DO NOT
DO NOT
GENERAL SCALE
DO
GENERAL SCALE
NOT
GENERALDRAWING
SCALE
TOLERANCES DRAWING
TOLERANCES Mfg
DRAWING
TOLERANCES
IN IN Mfg
Appr.
IN Appr.
Drawn
Drawn Mfg
sel Appr.
Drawn sel 14-10-2019
sel Partname:
Partname: Concens
Partname: Concens
Concens
actuator
actuator
actuator
parts
partsparts
14-10-2019
14-10-2019
Properietary
Properietary
Øresundsvej Properietary
Øresundsvej 7 and
Øresundsvej 7 and confidential
7 confidential
and
Phone: confidential
Phone:+4570111131
Phone:
+4570111131 Material:
+4570111131 Material:
Material:
ACCORDANCE
ACCORDANCE
ACCORDANCE
WITHWITHWITHQ. Appr.Q. Appr.
Q. Appr.
The DK-6715
The
information
information
The Esbjerg
information
contained
contained Checked
Checked
Checked Productname:
Productname:
Productname:
NFax:contained
in this
inFax:
thisin this
OK DK-6715
drawing
drawing
Denmark
Esbjerg
DK-6715
isDenmark
Denmark drawing
theis sole
NEsbjerg
theissoleproperty
theMail:
Fax:
N
property
sole of
+4576105010
property
Mail:
+4576105010
+4576105010ISO ISO
of Info@concens.com
of Info@concens.com
Info@concens.com
Mail: Finish:
Finish:
2768-mK
DIMENSIONS
Finish:
2768-mK
ISO 2768-mK
DIMENSIONS
DIMENSIONS
ARE
DIMENSIONS
ARE
IN mm
IN
AREmmINComments:
ARE
Eng
Comments:
mm
IN mm
Eng
Appr.
Comments:
Name
Appr.
Eng NameName
Appr. DateDate Note:
NameDate Note:Note:
Date Productgroup:
Productgroup:
Productgroup:
Productgroup:
Concens
Concens
Concens
actuator
Concens
actuator
actuator
parts
actuator
partspartsparts
Concens
Concens
Øresundsvej
A/S.
Concens
Øresundsvej
in part
in part
A/S.
Any Any
Øresundsvej
a7asØresundsvej
or Properietary
in
asor
part a7 whole
whole
or as OK
reproduction
A/S.Web:
reproduction
AnyWeb:
Phone:
without
a
reproduction
Phone:
7 whole
without
ww.concens.com
Web: ww.concens.com
+4570111131
7 the Phone:
ww.concens.com
+4570111131
without
the Phone:
+4570111131
the +4570111131
GENERAL
DO NOT OK
GENERAL
DO NOT
ACCORDANCE
GENERAL
TOLERANCES
SCALE
TOLERANCES
NOT
ACCORDANCE
GENERAL
DO SCALE
TOLERANCES
DRAWING
SCALE
ACCORDANCE
WITH
IN
TOLERANCES
DRAWING
ACCORDANCE
IN
Drawn
DRAWING
WITHWITHWITH
IN Appr.
Drawn
Mfg Mfg
Appr. IN
Drawn Drawn
sel Appr.
Mfg sel14-10-2019
sel sel14-10-2019
14-10-2019 14-10-2019
Partname:
Partname:
Partname:
Drawing
Drawing
No:
Drawing
No: No: Rev.Rev. Rev.
WRONG
Properietary
Properietary and and
confidential
confidential
and confidential Material:
Material: Weight:
Weight:
Material: Weight: Checked
Q. Checked
Appr.
Q. Checked
Appr.
Q. Checked
Appr. Productname:
Productname:
Productname:
Productname:
DK-6715
DK-6715
written
The written
The Esbjerg
DK-6715
permission
written
information Esbjerg
information
The DK-6715
permissionpermission
information
contained Fax:
N Esbjerg
ofcontained
Concens
Mail:
Fax:
NofEsbjerg
Concens+4576105010
Nofthis
contained
in
Mail:
inFax:
A/S +4576105010
Nthis
Concens
A/S Fax:
+4576105010
A/S
in this
Info@concens.com
Mail:
+4576105010ISO 2768-mK
ISO
N/A
DIMENSIONS
2768-mK
ISO 2768-mK
N/A
DIMENSIONS
ISO 2768-mK
N/A
DIMENSIONS
ARE
DIMENSIONS
ARE
IN mm
IN
AREmm Eng
IN
ARE Eng
Appr.
Comments:Appr.
Eng
Comments:
IN mmName
mm Appr.
Eng
Comments: A3A3 A3 con
Appr.
NameName
DateDate con
50
con
50
standard-Bracke
Note:
NameDate 50
standard-Bracke
Note:standard-Bracke
Note:
Date Productgroup:
Productgroup:
Productgroup:
Productgroup:
Denmark
Denmark
is prohibited
is
drawing Denmark
is Denmark
prohibited
drawing is prohibited
isdrawing
the sole
theissoleproperty
the property
sole of of Info@concens.com
property Mail:
of Info@concens.com
Info@concens.com
Finish:
Finish:
Finish: Concens
Concens
Concens
actuator
Concens
actuator
actuator
parts
actuator
partspartsparts
Concens
ConcensA/S.
Concens
A/S.
Any Any A/S.Web: AnyWeb:
reproduction
reproduction ww.concens.com
Web:
reproductionww.concens.com
Web: ww.concens.com GENERAL
ww.concens.comGENERAL
DO NOT
DO NOTGENERAL
TOLERANCES
SCALE
DO TOLERANCES
GENERAL
SCALE
NOT
DO TOLERANCES
DRAWING
SCALE
NOT IN
TOLERANCES
DRAWING
SCALE IN
Mfg
Drawn
DRAWING IN Appr.
Mfg
Appr.
Drawn
DRAWING IN
Mfg
sel Appr.
Drawn Mfg
DrawnAppr.
sel14-10-2019
sel
14-10-2019Partname:
Partname:
sel14-10-2019 Partname:
14-10-2019 Partname:
Øresundsvej
Øresundsvej
Properietary Øresundsvej
Properietary 7 and
Øresundsvej
Properietary 7 and
Properietary Phone:
7 and Phone:
confidential +4570111131
Phone:
+4570111131
7 confidential Phone:
+4570111131
+4570111131ACCORDANCE
ACCORDANCE
ACCORDANCE
WITH
ACCORDANCE
WITHWITH WITH
in part
in part
or in
asor
part
aas whole
or
a whole
as a confidential
without
whole and
without
the confidential
without
the the Material:
Material:
Material:
Material:
Weight:
Weight:
Weight: Q. Appr.
Q. Appr.
Checked Q. Appr.
Checked Q. Appr.
Checked
Checked Productname:
Productname:
Productname:
Drawing Productname:
Drawing
No:
Drawing
No: No: Rev.Rev. Rev.
The DK-6715
The
information
DK-6715 information
The Esbjerg
Esbjerg
DK-6715 information
Thecontained
DK-6715 information
contained
NFax:
N Esbjerg contained
in
N this
Fax:
Esbjerg in
contained
Nthis inFax:
+4576105010
Fax: this
+4576105010in this
+4576105010
+4576105010
written
written
drawing
permission
drawing
Denmark
written
permission
isDenmark
Denmark drawing
theis sole
permission
drawing
of Concens
theissole
Denmark
of Concens
property
the is
of A/S
property
sole
Mail:the of
Concens
property
sole
Mail:
A/S A/S
ofproperty
of Info@concens.com
Info@concens.com
Mail:
ISO 2768-mK
ISO
of Info@concens.com
Info@concens.com
Mail: Finish:
Finish:
N/A
Finish:
2768-mK
ISO
Finish:
2768-mK
ISO
N/A N/A
2768-mK Comments:
Eng Comments:
Eng Comments:
Appr.Appr.
Eng Appr. A3A3 A3 con
Comments:
Eng Appr. con
50
con
50
standard-Bracke
50
standard-Bracke
standard-Bracke
Note:Note:Note:Note:
is prohibited
is prohibited
is prohibited
Concens
ConcensA/S.
ConcensA/S.
Any
ConcensAny
reproduction
A/S.Web:
reproduction
Any
A/S. reproduction
Any
Web: reproduction
ww.concens.com
Web: ww.concens.com
Web: ww.concens.com
ww.concens.com
DO NOT
DO NOT
SCALE
DO SCALE
NOT
DO
DRAWING
SCALE
NOT
DRAWING
SCALE Mfg
DRAWING Mfg
Appr.Appr.
DRAWING Mfg Appr.
Mfg Appr. Partname:
Partname:
Partname:
Partname:
Properietary
Properietary
in part or Properietary
in part in
asor
part
a asand
Properietary
whole
in or and
apartconfidential
whole
as a confidential
and
without
or whole
as a confidential
and
without
the
whole confidential
without
the without
the the Material:
Material:
Material:
Material:
Weight:
Weight: Weight: Q. Appr.
Weight: Q. Appr.
Q. Appr.
Q. Appr. Drawing
Drawing
No:
Drawing
No:
Drawing
No: No: Rev.Rev. Rev. Rev.
The The
information
written
written
drawing
information
The
permission
drawing
written information
Thecontained
permission
isdrawing
written information
contained
permission
of Concenscontained
inof
permission this
of Concens in
contained
A/S this
Concensin this
ofA/S
Concens in this
A/S A/S N/AN/A N/A N/A Comments:
Comments:
Comments: A3A3 A3 con
Comments: A3con
50
con
50
standard-Bracke
con
50
standard-Bracke
50
standard-Bracke
standard-Bracke
Note:Note:Note:Note:
is prohibitedisthe
is prohibitedis sole
drawing
isthe
prohibited issole
property
theis
prohibited property
sole
theofproperty
soleofproperty
of of Finish: Finish:
Finish:
Finish:
Concens
ConcensA/S.
ConcensA/S.
Any
ConcensAny
reproduction
A/S.reproduction
Any
A/S.reproduction
Any reproduction
in part
in part
or in
asor
part
a aswhole
in orapart
whole
aswithout
or
a whole
as
without
a the
whole
without
thewithout
the the Weight:
Weight:
Weight:
Weight: Drawing
Drawing
No:
Drawing
No:
Drawing
No: No: Rev.Rev. Rev. Rev.
written
written
permission
written
permission
written
permission
of Concens
permission
of Concens
of A/S
Concens
ofA/S
Concens
A/S A/S N/AN/A N/A N/A A3A3 A3 con
A3con
50
con
50
standard-Bracke
con
50
standard-Bracke
50
standard-Bracke
standard-Bracke
is prohibited
is prohibited
is prohibited
is prohibited

OK
Do not clamp actuators on tubing.
Always keep both brackets mounted in the same orientation and ensure
to flush mount actuator.
concens
Concens A/S
Øresundsvej 7
DK6715 Esbjerg N.
Denmark

Brackets must always be able to rotate on axels in mountings. www.concens.com

Customer:
Avoid radial forces at all times. Project: Mounting methods
Date: 10nov11 Init: pj

Rev: 1,0 Init: pj

D ATA S H E E T | con5 0 | February 2021 | 3
 DATA S H E E T

Con50
con50Item
Itemnumber
Number Combination
combination

5 0 0 1 0 0 - 2 7 3 3 1 2 - 0 0 0 0 0 0
Type ID

Piston ring color

Tube color

Brackets

Steel & IP Class

Hall sensors
(- without hall /+ with hall)

Cable & Connector

Cable Length

Pitch

Voltage
con50

Gearing

Low noise
(- without low noise /+ with low noise)

Stroke length

Product series

Recommendations and warnings

Never expose the actuator to hammer strike during installation or in other situations.
Retrofitted bushings should be pressed into the bracket-borings. No hammering.
Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when
actuator is overloaded in another way.
Keep piston tube clean.
Longer cable lengths may cause voltage drop which affects the performance of the actuator.
For medical applications (IEC60601-1, ANSI/AAMI/ES60601-1, CAN/CSA-C22.2 No60601-1):
Operating temperature + 5 ˚C to + 48 ˚C, , Relative humidity 20 % - 70 % atmospheric pressure = 1atm.
Connect to medically approved supply source only and according to guidelines provided with the source.
Function of the actuator is subject to the settings of the controller. If using your own controller please contact Concens.
The dust and water sealing of HE (Harsh Environment) actuators might affect their performance.
All specifications are for 25 ºC ambient – low temperature might affect performance.
Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed.
IEC 60417-5172 The combination of gearing and stroke can cause limitations in the use of "End limit FW" when using the C2-30 control.
See more in the datasheet for C2-30.
Class II equipment

Disclaimer
Concens products are continuously developed, built and tested for highest requirements and reliability but it is always the
responsibility of the customer to validate and test the suitability of our products in a given application and environment.
Concens products must not be used in safety critical applications.
ISO 7010-M002 We do our utmost to provide accurate and up-to-date information at all times. In spite of that, Concens cannot be held
responsible for any errors in the documentation. Specifications are subject to change without prior notice.
Refer to instruction
manual/booklet For more information, please visit our website at www.concens.com

- excellent electric actuators

Concens A/S T +45 70 11 11 31
Øresundsvej 7 F +45 76 10 50 10
DK-6715 Esbjerg N E info@concens.com
www.concens.com Denmark VAT DK10132266