© Messko GmbH Telefon +49 (0)61 71 63 98-0

www.messko.com Gewerbegebiet An den Drei Hasen Telefax +49 (0)61 71 63 98-98

www.messko.com
Cargolog®
Messko-Platz 1 info@messko.de
61440 Oberursel, Germany www.messko.com Impact Recorder

Securely attached for good results A clear option: GPS (Global Positioning System)
The more securely an impact recorder is attached to the transformer, An example: You notice in the port of destination, after transport
the less risk there is of receiving inaccurate recordings. A device by truck and ship, that the LED for acceleration has lit up, in other
attached by magnet could record its own vibrations and provide words a preset limit value has been exceeded. As you can see in the
under certain circumstances inaccurate measuring results. For this analysis software, Cargolog® has recorded the shock event with its
reason we recommend screwing the Cargolog® to the transformer. maximum value and duration and in addition to the time also in-
It has proved useful for transformer manufacturers to add such a dicates the exact position where the event occurred. Not only does
mounting device during tank construction. This means that the im- this help clarify the question of who is at fault where liability and
pact recorder is simple to mount using just 4 M6 screws. There are insurance is concerned, it also helps you to detect weak points in the
special attachments for mounting in the inside of the transformer transportation system. While setting the parameters you can decide
– these depend on whether or not this is filled with oil. yourself whether the GPS signals should be sent when specific limit
The Cargolog® can be mounted either vertically or horizontally, as values are reached or at fixed time intervals. You can also see later
required. If not mounted horizontally, the tilt angle is calculated in the software when signals were sent.
accordingly. Generally GPS reception is reduced or even impossible when the
Thanks to its 5-meter long antenna the GPS system can make a sa- transformer is in a closed space – this also includes below-deck
tellite connection if the registration unit is in an unfavourable loca- loading during transport by sea. However there is research underway
tion. There is a special opening in the protective aluminium housing for so-called “Tracking functions”. There will also be the option, if
to accommodate this antenna. Please do not forget, that the longer required, of receiving event messages directly on your mobile phone
the antenna, the weaker the GPS signal is. via GSM (Global System for Mobile Communications).

Cargolog®, mounted with Aluminium protection housing.

Tried and tested in practice

Messko offers with Cargolog® a device that is specific to the
requirements of its customers. The concept has proved successful
in a multitude of industrial applications: a compact device, without
any moving parts, with the lowest possible power consumption, easy
to use and made exceptionally well of top-quality materials. So it is
of no surprise that companies such as the paper manufacturer Stora
Enso or ABB are glad to have these impact recorders in operation.

Important note: The information contained in all of our publications may differ in detail from Messko Messko
the actual equipment delivered. We reserve the right to make alterations without notice.
IN2101/00/01 • 0209/1000 • Art.no. 990455
Printed in Germany • Messko/Usa
Keeping on eye on everything The Cargolog® concept A communication module with an infrared interface is simply placed
Registration unit Technical Data
Your transformers are exposed to a lot of potential sources of damage The core of the Cargolog is the registration unit equipped with sen- on top of the registration unit for data transfer. A standard USB jack
Dimensions: 145 x 145 x 44mm
while in transit. Messko offers a device for transport monitoring that sors, data logger and LEDs plus housing for the battery. Depending is used for connection to the laptop/PC. The software provided on CD
Material: Polypropylene (PP)
will ensure you know exactly what has happened while your trans- on the installation (internally in/externally on the transformer) it is is used for setting parameters and for visualisation.
Weight: approx. 450 grams
former was on the road. This digital impact recorder, also known as mounted with an attachment unit. For protection purposes, this can The GPS antenna is equipped with a magnet on the bottom so that Operating Temperature: -40° C - +80° C
a data logger or shock recorder, records all shocks and knocks with a be installed in an aluminium housing. it can simply be placed on the registration unit. The antenna can be Power Supply: Battery: 3,6 V lithium-thionyl chloride (Li-SOCI2), max. capacity 17,000 mAh
time stamp. These accelerations are saved together with their time attached as required. Self-discharge rate <3 % after one year storage at +20° C
sequence in all three axes. In addition the recorder measures the tilt
Protection class: IP54, electronics is protected with IP65
angle as well as temperature sequence and humidity. LEDs indicate
if individually preset limit values are exceeded. The events can then Communication module
be displayed and analysed easily using the comprehensive visuali- Dimensions: 158 x 48 x 35 mm
zation software. Material: Polymethyl methacrylate (PMMA)
Interface: Infrared towards registration unit
USB towards Laptop/PC
At all events the right solution
Cable length: 900 mm
A lot can happen during the transhipping of transformers, whether
Laptop/PC
from the rail, ship or truck. The LED indicators quickly show you Installation unit (for outside installation)
whether limit values have been exceeded. With the integrated GPS Dimensions: 200 x 150 x 40 mm
GPS antenna Registration unit with sensors,
function (optional) you can immediately pinpoint where the event Communication module with Material: Steel plate with black powder lacquer
battery and LEDs
occurred - with an impressive accuracy of down to 10 metres. Special infrared interface and USB
Protection housing
batteries ensure that the power supply is maintained even in the case Dimensions: 260 x 160 x 92 mm
of lengthy shipment times, over a period of up to one year. The inter- Material: Aluminium with grey powder lacquer
nal memory registers up to 38,800 events that cannot be overwritten can be placed with a magnet is stuck on the
on the registration unit registration unit Mounting: 4 x M6 screws
Cargolog® registration unit with sensors, battery and LEDs.
or deleted by any unauthorised persons during transport.
Measuring parameters
Two or even three impact recorders are often needed for the trans-
Temperature: -40° C to +80° C with +/-0,5° C
portation of transformers. For this purpose Messko offers special
Humidity: 10 % to 90 % with +/-3 %
attachments for mounting on the active part of the transformer. On is screwed on the optional mounting in Acceleration X Y Z: +/-2,5 G; +/-10 G; +/-25 G; +/-100 G with +/-2 %
request you will receive additional aluminium housing for external attachment unit aluminium housing Frequency range: 2-30 Hz resp. to 300 Hz
mounting as part of the delivery.
Inclination angle X Y: 0° to 90° with +/-5°
The Cargolog® recorders are of course well suited for other appli- Sampling rate for acceleration: 1 kHz
cations apart from the monitoring of transformer transportation. The Logging interval: 2 – 65,535 seconds (for temperature/humidity)
recorders have also been used for such applications as monitoring Max. memory capacity: 38,800 parameters (226,352 bytes)
the transport of liquid gas units and large rolls of paper.
Tests/Assessments
EN 50081-1: EMV (emission)
Mounting on transformer (4 x M6) EN 50082-2: EMV (immunity – industry)
EN 55022 Klasse B: Radiated emission
Features EN 61000-4-2: Immunity against electrostatic discharge
You want to see what is going on EN 61000-4-3: Immunity against electromagnetic fields
• Three-dimensional acceleration measurement
The analysis software will help you to see quickly what has happe-
(X/Y/Z): +/-2.5 G; +/-10 G; +/-25 G ; +/-100 G
ned during transportation. Shocks, vibrations, temperature ranges
with a 1.0 or 0.1G resolution
and humidity are indicated by the different coloured curves. Using
• Measurement of the acceleration time in ms
Drag&Drop functions you can, for example, set time intervals and
• Frequency range 2-30Hz or up to 300Hz
scales quite simply and can change from a horizontal to a vertical
• Tilt angle 0 – 90° in X and Y direction
view. Fading out parameters or zooming into specific area is also
• Temperature values (operating range -40° C to +80° C)
quick and easy to do. To make comparisons easier, it is also possible
• Relative humidity (accuracy +/-3 %)
to display measurements along side or above each other. A simple
• Visual display via 5 LEDs
click on the mouse will also allow you see the exact values, for ex-
• Windows-based software for setting parameters
ample, and if required the GPS position. Any areas that are relevant
and for analysis
for you can, of course, quite simply be printed out. In this way you
• Data transfer to a laptop/PC via USB
get a one-page report of events in addition to the recorder data and
• Optional: protective housing with protection class IP65
preset limit values. You can also export all values to Excel as text
• Optional: integrated GPS receiver/antenna
files and save your standard settings for applications at a later date.
Keeping on eye on everything The Cargolog® concept A communication module with an infrared interface is simply placed
Registration unit Technical Data
Your transformers are exposed to a lot of potential sources of damage The core of the Cargolog is the registration unit equipped with sen- on top of the registration unit for data transfer. A standard USB jack
Dimensions: 145 x 145 x 44mm
while in transit. Messko offers a device for transport monitoring that sors, data logger and LEDs plus housing for the battery. Depending is used for connection to the laptop/PC. The software provided on CD
Material: Polypropylene (PP)
will ensure you know exactly what has happened while your trans- on the installation (internally in/externally on the transformer) it is is used for setting parameters and for visualisation.
Weight: approx. 450 grams
former was on the road. This digital impact recorder, also known as mounted with an attachment unit. For protection purposes, this can The GPS antenna is equipped with a magnet on the bottom so that Operating Temperature: -40° C - +80° C
a data logger or shock recorder, records all shocks and knocks with a be installed in an aluminium housing. it can simply be placed on the registration unit. The antenna can be Power Supply: Battery: 3,6 V lithium-thionyl chloride (Li-SOCI2), max. capacity 17,000 mAh
time stamp. These accelerations are saved together with their time attached as required. Self-discharge rate <3 % after one year storage at +20° C
sequence in all three axes. In addition the recorder measures the tilt
Protection class: IP54, electronics is protected with IP65
angle as well as temperature sequence and humidity. LEDs indicate
if individually preset limit values are exceeded. The events can then Communication module
be displayed and analysed easily using the comprehensive visuali- Dimensions: 158 x 48 x 35 mm
zation software. Material: Polymethyl methacrylate (PMMA)
Interface: Infrared towards registration unit
USB towards Laptop/PC
At all events the right solution
Cable length: 900 mm
A lot can happen during the transhipping of transformers, whether
Laptop/PC
from the rail, ship or truck. The LED indicators quickly show you Installation unit (for outside installation)
whether limit values have been exceeded. With the integrated GPS Dimensions: 200 x 150 x 40 mm
GPS antenna Registration unit with sensors,
function (optional) you can immediately pinpoint where the event Communication module with Material: Steel plate with black powder lacquer
battery and LEDs
occurred - with an impressive accuracy of down to 10 metres. Special infrared interface and USB
Protection housing
batteries ensure that the power supply is maintained even in the case Dimensions: 260 x 160 x 92 mm
of lengthy shipment times, over a period of up to one year. The inter- Material: Aluminium with grey powder lacquer
nal memory registers up to 38,800 events that cannot be overwritten can be placed with a magnet is stuck on the
on the registration unit registration unit Mounting: 4 x M6 screws
Cargolog® registration unit with sensors, battery and LEDs.
or deleted by any unauthorised persons during transport.
Measuring parameters
Two or even three impact recorders are often needed for the trans-
Temperature: -40° C to +80° C with +/-0,5° C
portation of transformers. For this purpose Messko offers special
Humidity: 10 % to 90 % with +/-3 %
attachments for mounting on the active part of the transformer. On is screwed on the optional mounting in Acceleration X Y Z: +/-2,5 G; +/-10 G; +/-25 G; +/-100 G with +/-2 %
request you will receive additional aluminium housing for external attachment unit aluminium housing Frequency range: 2-30 Hz resp. to 300 Hz
mounting as part of the delivery.
Inclination angle X Y: 0° to 90° with +/-5°
The Cargolog® recorders are of course well suited for other appli- Sampling rate for acceleration: 1 kHz
cations apart from the monitoring of transformer transportation. The Logging interval: 2 – 65,535 seconds (for temperature/humidity)
recorders have also been used for such applications as monitoring Max. memory capacity: 38,800 parameters (226,352 bytes)
the transport of liquid gas units and large rolls of paper.
Tests/Assessments
EN 50081-1: EMV (emission)
Mounting on transformer (4 x M6) EN 50082-2: EMV (immunity – industry)
EN 55022 Klasse B: Radiated emission
Features EN 61000-4-2: Immunity against electrostatic discharge
You want to see what is going on EN 61000-4-3: Immunity against electromagnetic fields
• Three-dimensional acceleration measurement
The analysis software will help you to see quickly what has happe-
(X/Y/Z): +/-2.5 G; +/-10 G; +/-25 G ; +/-100 G
ned during transportation. Shocks, vibrations, temperature ranges
with a 1.0 or 0.1G resolution
and humidity are indicated by the different coloured curves. Using
• Measurement of the acceleration time in ms
Drag&Drop functions you can, for example, set time intervals and
• Frequency range 2-30Hz or up to 300Hz
scales quite simply and can change from a horizontal to a vertical
• Tilt angle 0 – 90° in X and Y direction
view. Fading out parameters or zooming into specific area is also
• Temperature values (operating range -40° C to +80° C)
quick and easy to do. To make comparisons easier, it is also possible
• Relative humidity (accuracy +/-3 %)
to display measurements along side or above each other. A simple
• Visual display via 5 LEDs
click on the mouse will also allow you see the exact values, for ex-
• Windows-based software for setting parameters
ample, and if required the GPS position. Any areas that are relevant
and for analysis
for you can, of course, quite simply be printed out. In this way you
• Data transfer to a laptop/PC via USB
get a one-page report of events in addition to the recorder data and
• Optional: protective housing with protection class IP65
preset limit values. You can also export all values to Excel as text
• Optional: integrated GPS receiver/antenna
files and save your standard settings for applications at a later date.
Keeping on eye on everything The Cargolog® concept A communication module with an infrared interface is simply placed
Registration unit Technical Data
Your transformers are exposed to a lot of potential sources of damage The core of the Cargolog is the registration unit equipped with sen- on top of the registration unit for data transfer. A standard USB jack
Dimensions: 145 x 145 x 44mm
while in transit. Messko offers a device for transport monitoring that sors, data logger and LEDs plus housing for the battery. Depending is used for connection to the laptop/PC. The software provided on CD
Material: Polypropylene (PP)
will ensure you know exactly what has happened while your trans- on the installation (internally in/externally on the transformer) it is is used for setting parameters and for visualisation.
Weight: approx. 450 grams
former was on the road. This digital impact recorder, also known as mounted with an attachment unit. For protection purposes, this can The GPS antenna is equipped with a magnet on the bottom so that Operating Temperature: -40° C - +80° C
a data logger or shock recorder, records all shocks and knocks with a be installed in an aluminium housing. it can simply be placed on the registration unit. The antenna can be Power Supply: Battery: 3,6 V lithium-thionyl chloride (Li-SOCI2), max. capacity 17,000 mAh
time stamp. These accelerations are saved together with their time attached as required. Self-discharge rate <3 % after one year storage at +20° C
sequence in all three axes. In addition the recorder measures the tilt
Protection class: IP54, electronics is protected with IP65
angle as well as temperature sequence and humidity. LEDs indicate
if individually preset limit values are exceeded. The events can then Communication module
be displayed and analysed easily using the comprehensive visuali- Dimensions: 158 x 48 x 35 mm
zation software. Material: Polymethyl methacrylate (PMMA)
Interface: Infrared towards registration unit
USB towards Laptop/PC
At all events the right solution
Cable length: 900 mm
A lot can happen during the transhipping of transformers, whether
Laptop/PC
from the rail, ship or truck. The LED indicators quickly show you Installation unit (for outside installation)
whether limit values have been exceeded. With the integrated GPS Dimensions: 200 x 150 x 40 mm
GPS antenna Registration unit with sensors,
function (optional) you can immediately pinpoint where the event Communication module with Material: Steel plate with black powder lacquer
battery and LEDs
occurred - with an impressive accuracy of down to 10 metres. Special infrared interface and USB
Protection housing
batteries ensure that the power supply is maintained even in the case Dimensions: 260 x 160 x 92 mm
of lengthy shipment times, over a period of up to one year. The inter- Material: Aluminium with grey powder lacquer
nal memory registers up to 38,800 events that cannot be overwritten can be placed with a magnet is stuck on the
on the registration unit registration unit Mounting: 4 x M6 screws
Cargolog® registration unit with sensors, battery and LEDs.
or deleted by any unauthorised persons during transport.
Measuring parameters
Two or even three impact recorders are often needed for the trans-
Temperature: -40° C to +80° C with +/-0,5° C
portation of transformers. For this purpose Messko offers special
Humidity: 10 % to 90 % with +/-3 %
attachments for mounting on the active part of the transformer. On is screwed on the optional mounting in Acceleration X Y Z: +/-2,5 G; +/-10 G; +/-25 G; +/-100 G with +/-2 %
request you will receive additional aluminium housing for external attachment unit aluminium housing Frequency range: 2-30 Hz resp. to 300 Hz
mounting as part of the delivery.
Inclination angle X Y: 0° to 90° with +/-5°
The Cargolog® recorders are of course well suited for other appli- Sampling rate for acceleration: 1 kHz
cations apart from the monitoring of transformer transportation. The Logging interval: 2 – 65,535 seconds (for temperature/humidity)
recorders have also been used for such applications as monitoring Max. memory capacity: 38,800 parameters (226,352 bytes)
the transport of liquid gas units and large rolls of paper.
Tests/Assessments
EN 50081-1: EMV (emission)
Mounting on transformer (4 x M6) EN 50082-2: EMV (immunity – industry)
EN 55022 Klasse B: Radiated emission
Features EN 61000-4-2: Immunity against electrostatic discharge
You want to see what is going on EN 61000-4-3: Immunity against electromagnetic fields
• Three-dimensional acceleration measurement
The analysis software will help you to see quickly what has happe-
(X/Y/Z): +/-2.5 G; +/-10 G; +/-25 G ; +/-100 G
ned during transportation. Shocks, vibrations, temperature ranges
with a 1.0 or 0.1G resolution
and humidity are indicated by the different coloured curves. Using
• Measurement of the acceleration time in ms
Drag&Drop functions you can, for example, set time intervals and
• Frequency range 2-30Hz or up to 300Hz
scales quite simply and can change from a horizontal to a vertical
• Tilt angle 0 – 90° in X and Y direction
view. Fading out parameters or zooming into specific area is also
• Temperature values (operating range -40° C to +80° C)
quick and easy to do. To make comparisons easier, it is also possible
• Relative humidity (accuracy +/-3 %)
to display measurements along side or above each other. A simple
• Visual display via 5 LEDs
click on the mouse will also allow you see the exact values, for ex-
• Windows-based software for setting parameters
ample, and if required the GPS position. Any areas that are relevant
and for analysis
for you can, of course, quite simply be printed out. In this way you
• Data transfer to a laptop/PC via USB
get a one-page report of events in addition to the recorder data and
• Optional: protective housing with protection class IP65
preset limit values. You can also export all values to Excel as text
• Optional: integrated GPS receiver/antenna
files and save your standard settings for applications at a later date.
 © Messko GmbH Telefon +49 (0)61 71 63 98-0
www.messko.com Gewerbegebiet An den Drei Hasen Telefax +49 (0)61 71 63 98-98
www.messko.com
Cargolog®
Messko-Platz 1 info@messko.de
61440 Oberursel, Germany www.messko.com Impact Recorder

Securely attached for good results A clear option: GPS (Global Positioning System)
The more securely an impact recorder is attached to the transformer, An example: You notice in the port of destination, after transport
the less risk there is of receiving inaccurate recordings. A device by truck and ship, that the LED for acceleration has lit up, in other
attached by magnet could record its own vibrations and provide words a preset limit value has been exceeded. As you can see in the
under certain circumstances inaccurate measuring results. For this analysis software, Cargolog® has recorded the shock event with its
reason we recommend screwing the Cargolog® to the transformer. maximum value and duration and in addition to the time also in-
It has proved useful for transformer manufacturers to add such a dicates the exact position where the event occurred. Not only does
mounting device during tank construction. This means that the im- this help clarify the question of who is at fault where liability and
pact recorder is simple to mount using just 4 M6 screws. There are insurance is concerned, it also helps you to detect weak points in the
special attachments for mounting in the inside of the transformer transportation system. While setting the parameters you can decide
– these depend on whether or not this is filled with oil. yourself whether the GPS signals should be sent when specific limit
The Cargolog® can be mounted either vertically or horizontally, as values are reached or at fixed time intervals. You can also see later
required. If not mounted horizontally, the tilt angle is calculated in the software when signals were sent.
accordingly. Generally GPS reception is reduced or even impossible when the
Thanks to its 5-meter long antenna the GPS system can make a sa- transformer is in a closed space – this also includes below-deck
tellite connection if the registration unit is in an unfavourable loca- loading during transport by sea. However there is research underway
tion. There is a special opening in the protective aluminium housing for so-called “Tracking functions”. There will also be the option, if
to accommodate this antenna. Please do not forget, that the longer required, of receiving event messages directly on your mobile phone
the antenna, the weaker the GPS signal is. via GSM (Global System for Mobile Communications).

Cargolog®, mounted with Aluminium protection housing.

Tried and tested in practice

Messko offers with Cargolog® a device that is specific to the
requirements of its customers. The concept has proved successful
in a multitude of industrial applications: a compact device, without
any moving parts, with the lowest possible power consumption, easy
to use and made exceptionally well of top-quality materials. So it is
of no surprise that companies such as the paper manufacturer Stora
Enso or ABB are glad to have these impact recorders in operation.

Important note: The information contained in all of our publications may differ in detail from Messko Messko
the actual equipment delivered. We reserve the right to make alterations without notice.
IN2101/00/01 • 0209/1000 • Art.no. 990455
Printed in Germany • Messko/Usa
 © Messko GmbH Telefon +49 (0)61 71 63 98-0
www.messko.com Gewerbegebiet An den Drei Hasen Telefax +49 (0)61 71 63 98-98
www.messko.com
Cargolog®
Messko-Platz 1 info@messko.de
61440 Oberursel, Germany www.messko.com Impact Recorder

Securely attached for good results A clear option: GPS (Global Positioning System)
The more securely an impact recorder is attached to the transformer, An example: You notice in the port of destination, after transport
the less risk there is of receiving inaccurate recordings. A device by truck and ship, that the LED for acceleration has lit up, in other
attached by magnet could record its own vibrations and provide words a preset limit value has been exceeded. As you can see in the
under certain circumstances inaccurate measuring results. For this analysis software, Cargolog® has recorded the shock event with its
reason we recommend screwing the Cargolog® to the transformer. maximum value and duration and in addition to the time also in-
It has proved useful for transformer manufacturers to add such a dicates the exact position where the event occurred. Not only does
mounting device during tank construction. This means that the im- this help clarify the question of who is at fault where liability and
pact recorder is simple to mount using just 4 M6 screws. There are insurance is concerned, it also helps you to detect weak points in the
special attachments for mounting in the inside of the transformer transportation system. While setting the parameters you can decide
– these depend on whether or not this is filled with oil. yourself whether the GPS signals should be sent when specific limit
The Cargolog® can be mounted either vertically or horizontally, as values are reached or at fixed time intervals. You can also see later
required. If not mounted horizontally, the tilt angle is calculated in the software when signals were sent.
accordingly. Generally GPS reception is reduced or even impossible when the
Thanks to its 5-meter long antenna the GPS system can make a sa- transformer is in a closed space – this also includes below-deck
tellite connection if the registration unit is in an unfavourable loca- loading during transport by sea. However there is research underway
tion. There is a special opening in the protective aluminium housing for so-called “Tracking functions”. There will also be the option, if
to accommodate this antenna. Please do not forget, that the longer required, of receiving event messages directly on your mobile phone
the antenna, the weaker the GPS signal is. via GSM (Global System for Mobile Communications).

Cargolog®, mounted with Aluminium protection housing.

Tried and tested in practice

Messko offers with Cargolog® a device that is specific to the
requirements of its customers. The concept has proved successful
in a multitude of industrial applications: a compact device, without
any moving parts, with the lowest possible power consumption, easy
to use and made exceptionally well of top-quality materials. So it is
of no surprise that companies such as the paper manufacturer Stora
Enso or ABB are glad to have these impact recorders in operation.

Important note: The information contained in all of our publications may differ in detail from Messko Messko
the actual equipment delivered. We reserve the right to make alterations without notice.
IN2101/00/01 • 0209/1000 • Art.no. 990455
Printed in Germany • Messko/Usa