Series 2200 and 2220

Control Valves Series Series

2200 2220
Space-Saving Solution:
Yokeless design fits tight separator
and scrubber applications

Norriseal Series 2200 and 2220 control valves Features Contents

have been the standard for controlling fluids in the oil ᔢ Patented spherical plug and 2 Body Styles
matching seat gives precision 2 Valve Dimensions
and gas industry since1966.The hammer nut entry into
seating alignment 3 Specifications
the valve body allows quick access for trim inspection. 4 Valve Trim
ᔢ Two types of throttling trim for
Both Series 2200 and 2220 valves can be furnished precision control: modified per- 6 Actuators
centage and equal percentage 7 How to Order
with a variety of trims and end connections (see table
ᔢ Hammer nut has extra thread 7 Model Code
7 on page 4 and table 5 on page 3). engagement on the valve body
The Series 2200 has an open yoke which allows to release any pressure within
the body and allow safe removal
for the mounting of positioners, limit switches and of the bonnet/actuator during
disassembly
other devices. It is also used in applications that
ᔢ Integral flange is provided
require an exposed stem for accurate travel indication. on the bonnet to secure the
The yoke allows the valve to be used for higher hammer nut/bonnet to the valve
body, improving safety when
temperature ranges. used in a corrosive atmosphere
The Series 2220 is the close-coupled or yokeless, ᔢ Carbide, ceramic, alloy 6 and
space saving version of the Series 2200. This series soft seats with high-density
materials are available, as well
is ideal for controlling liquids on compressor scrubbers as seal materials for corrosion
and high/low temperatures;
and housed production separators where space is other materials are available for
at a premium. NACE applications

Engineered
Performance
2 body Styles and dimensions

body Styles
Globe, “T” Styles and Angle Bodies
The 1.00-inch comes in two styles: globe and
T-body, allowing fluid to flow straight through the
body in a globe pattern or angle flow pattern by
repositioning the pipe plug (which comes in the
bottom port) and replacing it in the upper port.
Norriseal popularized the T-body in 1950 and it
still is the most popular style in the industry.
The 2.00-inch body comes in two styles, globe
and angle.

1.00-inch T-body plug for 2.00-inch angle body

angle flow with quick with equal percentage
opening carbide trim. 17- 4 PH SST trim.

Table 1: ValVe dimenSionS

Face to Face “F”
Body ANSI Rating “G”
Size Body
150 300 600 900/1500 2500
Type
inches mm inches mm inches mm inches mm inches mm inches mm inches mm
NPT 6.25 159 6.25 159
1.00 25 RF 7.25 184 7.75 197 8.25 210 9.38 238 11.38 289
RTJ 7.75 197 8.25 210 8.25 210 9.38 238 11.38 289
4.88 124
NPT 7.50 191 7.50 191
2.00 50 RF 10.00 254 10.50 267 11.25 286 12.88 327 16.25 413
RTJ 10.50 267 11.13 283 11.38 289 13.00 330 16.48 418
* Angle 2.00 “screwed body not shown. “F” dimension = “F”/2.

"G"
NORRISEAL
1 "G" "G"
"F"/2 NORRISEAL
1
NORRISEAL
1

"F"/2
.75 "F"/2
"F"/2
"F" "F"/2
"F" 3.88
1.00“ NPT Body 1.00“ Globe Body 1.00“ Angle Body

"G"
"G" "G"
NORRISEAL NORRISEAL NORRISEAL
2 2
2
1.69 "F"/2

"F"/2 "F"/2

"F" "F"/2
"F"
2.00“ NPT Body 2.00“ Globe Body 2.00“ Angle Body
 Specifications 3

Table 2: maTerialS oF ConSTruCTion

Valve Component

Body ASTM A216 Gr. WCC ASTM A352 Gr. LCC

ASTM A351 Gr. CF8M ASTM A217 Gr. WC6
Bonnet ASTM A696/C 316 SST
ASTM A105 316 SST
Hammer Nut
ASTM A350 Gr. LF2
Stem 303 SST 17-4 PH SST
Monel 316 SST
Packing TFE V Ring Fabric V Ring
Viton/TFE
Packing Spring 316 SST Inconel/600
Mp-35-N
CSTL 316 SST
Packing Washer
316L SST
Brass 316L SST
Packing Retainer
316 SST
O-Ring Valve Nitrile Kalrez
Aflas Viton
EPR HSN
Buna/Nylon Viton/Nylon
Diaphragm
Neoprene/Nylon
Nitrile Viton
O-Ring Diaphragm
EPDM HSN
Actuator Spring Steel On Application
Adjust. Screw CSTL/PLtd. 316 SST
Diaphragm Housing CSTL
Diaphragm Plate CSTL
Travel Indicator 303 SST
Actuator Pressure Connection Size – 1/4” – 18 NPT Thread

Table 3: operaTing TemperaTure*

2200/2220 Std. WCC Mtl. -20 to 180°F (-29 to 82°C)
2200/2220 Std. LCC Mtl. -40 to 180°F (-40 to 82°C)
2200 Opt. Mtl. -50 to 400°F (-45 to 204°C)
2220 Opt. Mtl. -50 to 300°F (-45 to 149°C)
* Optional material built valves can cover high or low temperature ranges, but not necessarily both.

Table 4: aCTuaTor
Actuator Maximum W. P. Size/Eff. Area Travel
Number psig bar sq. ins. cm. sq. ins. mm
9 55 3.7 35 226 0.625 15.9
12 55 3.7 70 452 0.625 15.9

Table 5: body end ConneCTionS and preSSure raTingS*

Body Size Pressure Rating ASME Flanged RF and RTJ
NPT Butt Weld Socket Weld Body Style
Inches mm psig bar 150/300 600 900/1500 2500
1.00 25 3750 259 X X X X X X Globe/”T”
1.00 25 6250 431 X X X X ”T”
2.00 50 3750 259 X X X X X X Globe/Angle
2.00 50 6000 259 X X X X Globe/Angle
* Pressure ratings are based on temperatures of -20 to 100° F (-29 to 38° C) with standard material.
Consult factory for pressure ratings for temperatures other than those shown.
(X) indicates end connections available.
4 Valve Trim

Table 6: 2200/2220 globe & angle body, modiFied perCenTage, equal perCenTage
& quiCk opening, unbalanCed, plug ConTrol TrimS

Flow Coefficient (CV) Globe Body Quick^

Body Size Trim Size Valve Opening – Percent of Total Travel Opening
Modified Percentage (Flow Up) (Flow Down)
Inches mm Inches mm 10 20 30 40 50 60 70 80 90 100 100
0.25 6.4 .284 .506 .657 .767 .875 .989 1.10 1.20 1.32 1.43 1.68
0.38 9.5 .311 .621 .942 1.28 1.64 2.07 2.51 2.93 3.35 3.70 3.82
1.00 25 0.50 12.7 .557 1.11 1.68 2.26 2.92 3.62 4.30 4.98 5.43 5.60 5.60
0.75 19.1 .752 1.57 2.43 3.42 4.58 6.08 7.93 9.71 10.6 11.0 11.6
1.00 25.4 .983 2.01 3.40 6.12 8.90 11.7 13.5 14.4 15.1 15.4 15.4
0.25 6.4 .284 .506 .657 .767 .875 .989 1.10 1.20 1.32 1.43 1.68
0.38 9.5 .311 .621 .942 1.28 1.64 2.07 2.51 2.93 3.35 3.70 3.75
2.00 50 0.50 12.7 .592 1.17 1.76 2.34 2.95 3.70 4.57 5.50 5.95 6.08 6.08
0.75 19.1 .882 1.76 2.76 3.82 5.05 6.57 8.49 10.8 12.2 12.9 13.0
1.00 25.4 1.01 2.02 3.58 6.45 9.38 12.32 13.7 15.4 16.7 17.1 23.0
* Consult factory for equal percentage and micro-groove trim values; ^Angle body

Table 7: plug TypeS and SizeS Table 8: plug maTerial

Size Quick Modified Equal Micro Standard Optional
Inches mm Opening Percentage Percentage Groove 316 SST
0.25 6.4 X X X X Carbide
0.38 9.4 X X X X 17- 4 SST Ceramic
0.50 12.7 X X X X Alloy 6
0.75 19.1 X X X Teflon
1.00 25.4 X X
Note: (X) indicates sizes available

HAMMER NUT

INTEGRAL
BONNET FLANGE

BONNET
OPEN
O O

C C

.375” O-RING

VALVE BODY

Fig. 11. Hammer Nut/Bonnet

Body Engagement

Fig. 9. 1.00” Series 2220 valve Fig. 10. 1.00” Series 2200
with a no. 9 reverse valve with a no. 9 direct
(spring closing) actuator. (spring opening) actuator.
Throttle trim, flow up. Throttle trim, flow up.
 Valve Trim (continued) 5

Table 9: maximum diFFerenTial preSSure (3-15 pSi)

Flow Under Seat Flow Over Seat

Actuator Gas Supply
Trim Size Throttle Quick Opening
Size Pressure
Direct Reverse Direct Reverse
Inches mm Number psig bar psig bar psig bar psig bar psig bar
20 1.4 2610 180 4750 327 6250 431 6250 431
9
30 2.0 6250 431 6250 431 6250 431 6250 431
.25 6.4
20 1.4 6250 431 6250 431 6250 431 6250 431
12
30 2.0 6250 431 6250 431 6250 431 6250 431
20 1.4 1050 72 1975 136 6250 431 6250 431
9
30 2.0 4220 291 5150 355 6250 431 6250 431
.38 9.5
20 1.4 3695 255 5550 383 6250 431 6250 431
12
30 2.0 6250 431 6250 431 6250 431 6250 431
20 1.4 530 36 1050 672 6250 431 6250 431
9
30 2.0 2315 160 2850 197 6250 431 6250 431
.50 12.7
20 1.4 2015 139 3060 211 6250 431 6250 431
12
30 2.0 5580 385 6250 431 6250 431 6250 431
20 1.4 180 12 420 29 2400 166 1700 117
9
30 2.0 975 67 1210 83 3460 239 1700 117
.75 19.1
20 1.4 840 58 1315 91 4520 312 2975 205
12
30 2.0 2415 167 2900 200 6250 431 5090 351
20 1.4 70 5 205 14 1215 84 780 54
9
30 2.0 515 35 650 45 1730 119 780 54
1.00 25.4
20 1.4 440 30 710 49 2255 155 175 12
12
30 2.0 1330 92 1600 110 3290 227 2330 161

Table 10: maximum diFFerenTial preSSure (6-30 pSi )

Flow Under Seat Flow Over Seat
Actuator Gas Supply Throttle Quick Opening
Trim Size
Size Pressure
Direct Reverse Direct Reverse
Inches mm Number psig bar psig bar psig bar psig bar psig bar
9 6250 431 6250 431
.25 6.4 33 2.3
12 6250 431 6250 431 6250 431 6250 431
9 3300 228 6250 431
.38 9.5 33 2.3
12 3955 273 5855 404 6250 431 6250 431
9 1804 124 6250 431
.50 12.7 33 2.3
12 2165 149 3200 221 6250 431 6250 431
9 751 52 3165 218
.75 19.1 33 2.3
12 905 62 1380 95 6250 431 285 20
9 393 27 1525 105
1.0 25.4 33 2.3
12 480 33 745 51 3600 248 175 12
6 actuators

Table 11: Spring deSCripTion

Actuator Quick
Throttle Range Table No.
Number Opening
AA 3 – 11 psi 9
9 NN 3 – 15 psi 9
HA HA 6 – 30 psi 10
HA HA 3 – 15 psi 9
12
WM WM 6 – 30 psi 10

Table 12: ShuToFF ClaSSiFiCaTion

ANSI Class IV (ANSI/FCI 70-2-1998)

Metal Seats Leakage less than 0.01% of maximum
valve capacity

ANSI Class VI (ANSI/FCI 70-2-1998)

Soft Seats Leakage less than one bubble
per minute.

Table 13: aCTuaTor dimenSionS

A B
Direct*
Body Size Actuator Spring Actuator Reverse Direct
Spring Cover
Number Description Diameter 2200 2220 2200 2220
Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm
1.00 25 AA 15.38 391 9.75 248 15.88 403 10.25 260 5.50 140
9 9.5 241
2.00 50 NN, HA 17.13 435 11.50 292 17.38 441 11.75 298 7.00 1178
1.00 25 HA 16.50 419 10.88 276 17.38 441 11.75 298 7.00 1178
12 12.5 318
2.00 50 WM 20.25 521 14.62 371 20.50 521 14.38 365 10.00 254
*Clearance required for “Direct Actuator” cover removal.

"A" DIA "A" DIA

"A" DIA "A" DIA

VENT

2.00 MAX

"B"
"B"
VENT
"B" "B"

OPEN

OPEN

VENT

VENT
Fig. 12 Fig. 13 Fig. 14 Fig. 15
Reverse Actuator Direct Actuator Reverse Actuator Direct Actuator
Series 2200 Series 2200 Series 2220 Series 2220
 model Code 7

how to order
1. Select the valve by series number: 2200 (with yoke)
or 2220 (close coupled)
2. Select body size
3. Select model number

body ConneCTionS
Size Code aCTuaTor SpringS
Screwed Female NPT S
Flanged Raised Face RF Code Actuator Number
Flanged Ring Type Joint RJ NN, AA,HA* 9
Flanged Flat Face FF HA, WM* 12
Beveled Buttweld B* *See Table 11

Socketweld W*
*Schedule Required 1-2200 S-36TGA-9AA
aCTuaTor Size
body Size
Code Number
Size Code
“00” None
1.00” 1
9 9
2.00” 2
12 12
EC Electric
ValVe SerieS
Series Code
Open Yoke 2200
paCking
Close Coupled 2220 Code Material Load Type Temp. Rating
— TFE V-Ring Non – Adj.-120°+400°F
SpeCial Comp0nenTS - 84°+204°C
C Fabric Non – Adj. -20°+250°F
Body/Bonnet Code V-Ring -28°+121°C
WCC/A696 – N(1) TFE V-Ring Non – Adj. -120°+400°F
CF8M/316 S - 84°+204°C
WCC/A696 (1) N Fugitive Emission Packing
CF8M/316(1) R L Viton/TFE Non – Adj. -15°+400° F
LCC/A350 LF2(1) P -26°+204°C

body raTing Seal maTerial

ANSI Class Code Code Wetted Diaphragm
150 02 A Buna Buna
300 07
K Viton(1) Buna
600 14
L Low Temp. Buna Buna
900 21
V Viton Buna
1500 36
7 HSN(1) Neoprene
2500 60
8 HSN(1) Viton
aCTuaTor aCTion
Mode Code
Direct (Fail Open) B
Reverse (Fail Close) T accessories:
Manual (Handwheel) F
Positioners (Electro-Pneumatic, Pneumatic
and Digital), Airlock, Limit Switches,
body STyle
Solenoid Valve, Booster Relay, Filter
Type Code Regulators, I/P Transducers, Pressure
Angle A Controllers, Temperature Controllers, etc.
Globe G
“T” T
(1) Suitable for NACE
 Why you can depend on
genuine Norriseal products

ᔢ In-house engineering and technical support

ᔢ In-depth applications experience

ᔢ Award-winning innovation and ongoing

product development

ᔢ ISO 9001:2008 certified manufacturing

ᔢ Over five decades of industry service

ᔢ Compliance with all industry standards

and specifications

ᔢ Responsive service and prompt delivery

ᔢ Field support available worldwide

Please contact your Norriseal representative

for more details and assistance in specifying
the optimal solution for your application.

Engineered Performance
11122 West Little York • Houston, Texas 77041
Tel: 713·466·3552 • Fax: 713·896·7386
www.norriseal.com

©2013 Dover Corporation/Norriseal and its affiliates. This manual, including all text and Due to the continuous improvement program at Norriseal, specifications and/or prices are
images, is a copyrighted work of Dover Corporation/Norriseal and its affiliates. It may not subject to change without notice or obligation.
be, in whole or in part, photocopied, scanned, or otherwise reproduced, revised, or
publicly displayed, without prior written permission from Norriseal. This manual is for use Envirosave is a mark of Norriseal, A Dover Company. All other trademarks contained herein
only with the new Norriseal valves and/or controllers listed in the manual. It may not be are the property of their respective owners.
distributed with, and is not for use with, any remanufactured products. 2200-0113T