SECTION A
1,   A thin plastic rod is bent into a circular ring of radius R. It is uniformly
     charged with charge density A. The magnitude of the electric field at its
     centre is:
     (A)                  (B)     Zero             (C)               (D)
            2:,R                                         4re,R             4egR
2.   Three small charged spheres X,Yand Zcarrying charges + q, - qand +q
     respectively are placed equidistant from each other, as shown in the
     figure. The spheres Y and Z are held in place. Initially X is also held in
     place, but is otherwise free to move. When X is released, the path
     followed by it will be:
                          X
                      Y               7
     (A)    A                   (B) B              (C) C             (D) D
3.   In a uniform straight wire, conduction electrons move along + x direction.
     Let E and j be the electric field and current density in the wire,
     respectively. Then:
     (A)    E and j both are along + x direction.
     (B)    E and j both are along -x direction.
     (C)    E is along +xdirection, but j is along - x direction.
     (D)    E is along x direction, but j is along + x direction.
4,   Two charged particles, P and Q. each having charge q but of masses mË
     and m, are accelerated through the same potential difference V. They
     enter a region of magnetic field B(1 v) and describe the circular paths
                                              m1
     of radii a and b respectively. Then             is equal to :
                                                            2                 2
            a                         b
     (A)                        (B)                (C)               (D)
            b
5.    A galvanometer of resistance G 2 is converted into an ammeter of range
      0 to I A. If the current through the galvanometer is 0-1% of IA, the
      resistance of the ammeter is:
                G                 G                   G                    G
      (A)                 (B)                  (C)                  (D)
             999                 1000                1001                 1001
6.    A 10 cm long wire lies along y-axis. It carries a current of 1-0 A in
      positive y-direction. Amagnetic field B =(5 mT)j          (8 mT)k exists in
      the region. The force on the wire is :
      (A)   (0-8 mN)                           (B)   - (0-8 mN) i
      (C)    (80 mN)i                          (D) -(80 mN)i
7.    The primary and secondary coils of a transformer have 500 turns and
      5000 turns respectively. The primary coil is connected to an ac source of
      220 V-50 Hz. The output across the secondary coil is:
      (A)   220 V -50 Hz                       (B)   1100 V - 50 Hz
      (C)    2200 V-5 Hz                       (D) 2200 V - 50 Hz
8.    The first scientist who produced and observed electromagnetic waves of
      wavelengths in the range 25 mm -5 mm was :
      (A)   J.C. Maxwell                       (B) H.R. Hertz
      (C)   J.C. Bose                          (D) G. Marconi
      The waves associated with a moving electron and a moving proton have
      the same wavelength A. It implies that they have the same:
      (A)   momentum                           (B) angular momentum
      (C)   speed                              (D)   energy
10.   Two beams, A and B whose photon energies are 3-3 eV and 11:3 eV
      respectively, illuminate a metallic surface (work function 2-3 eV,
      successively. The ratio of maximum speed of electrons emitted due to
      beam A to that due to beam B is :
      (A)   3             (B)    9             (C)                  (D)
                                                     3
11.    The transition of electron that gives rise to the formation of the second
       spectral line of the Balmer series in the spectrum of hydrogen atom
       corresponds to :
       (A)    ng= 2 and n; = 3                 (B) nç=3 and n; =4
       (C)    n=2 and n;       4               (D) ne= 2 and n; = o
12.    Ge is doped with As. Due to doping,
       (A)    the structure of Ge lattice is distorted.
                                                     increases.
       (B)    the number of conduction electrons
       (C)    the number of holes increases.
                                         electrons decreases.
       (D)    the number of conduction
                             are Assertion  (A) and  Reason (R) type questions. Two
Questions number 13 to 16              Assertion  (A) and   the other labelled
                                                                               Reason
statements are given      one labelled                                  given below.
                        answer from  the codes (A), (B), (C) and (D) as
(R). Select the correct                              are true and
                                                                    Reason (R) is the
                                  and Reason (R)
               Both Assertion (A)
       (A)
                                       the Assertion (A).
              correct explanation of                true, but Reason (R) is
                                                                            not
                                            (R) are
                                 and Reason
       (B)    Both Assertion (A)          Assertion (A).
                         explanation of the
              the correct                              false.
                        (A) is true, but Reason (R) is
       (C)
              Assertion                                      false.
                               false and Reason (R) is also
              Assertion (A) is
        (D)
                                                        suspended  and connected
                           long  parallel wires, freely
       Assertion (A): Two
13.                      series to a battery, move apart.         directions repel
                      in                                 opposite
                                             current in
                        Two wires carrying
       Reason (R):
                        each other.
                                                         produce  real images
                                  convex  mirrors cannot
                       Plane and
       Assertion (A) : under any circumstance.                      produce a
14.                                                    an object to
                                 image cannot serve as
       Reason (R):     A virtual                                              22.5/
                        real image.
15.   Assertion (A): The mutual inductance between two coils is maximum
                     when the coils are wound on each other.
      Reason (R):       The flux linkage between two coils is maximum when
                        they are wound on each other.
16.   Assertion (AJ: In photoelectric effect, the kinetic energy of the emitted
                        photoelectrons increases with increase in the intensity of
                        the incident light.
      Reason (R) :      Photoelectric current depends on the wavelength of the
                        incident light.
                                          SECTION B
17.   A uniform wire of length L and area of cross-section A has resistance R.
      The wire is uniformly stretched so that its length increases by 25%.
      Calculate the percentage increase in the resistance of the wire.               2
18.   An object is placed 30 cm in front of a concave mirror of radius of
      curvature 40 cm. Find the (i) position of the image formed and
                                                                                     2
      (ü)magnification of the image.
19.   Consider a neutron (mass m) of kinetic energy E and a photon of the
      same energy. Let A, and , be the de Broglie wavelength of neutron and
      the wavelength of photon respectively. Obtain an expression for p ..
20.   (a)   Monochromatic light of frequency 5-0 x 10 Hz passes from air
            into a medium of refractive index 1-5. Find the wavelength of the
            light (i) reflected, and (i) refracted at the interface of the two
            media.                                                                   2
                        OR
      (b)   A plano-convex lens of focal length 16 cm is made of a material of
            refractive index 1.4. Calculate the radius of the curved surface of
            the lens.                                                                2
21.   Differentiate between 'diffusion current' and 'drift current'. Explain their
                                       SECTION C
22.   An air-filled parallel plate capacitor with plate separation 1 mm has a
      capacitance of 20 pF. It is charged to 4-0 C. Calculate the amount of
      work done to pull its plates to a separation of 5 mm. Assume the charge
      on the plates remains the same.
23.   (a)    Define current density. Is it a scalar or a vector ? An electric field
             E is maintained in a metallic conductor. If n be the number of
             electrons (mass m, charge -e) per unit volume in the conductor
             and t its relaxation time, show that the current density
                                       ne
                  j =a E, where c=                                                    3
                        OR
      (b)    What is a Wheatstone bridge ? Obtain the necessary conditions
             under which the Wheatstone bridge is balanced.                           3
24.   A circular coil with cross-sectional area 0-2 cm carries a current of 4 A.
      It is kept in a uniform magnetic field of magnitude 0-5 T normal to the
      plane of the coil. Calculate :
      (a)   the net force on the coil.
      (b)   the torque on the coil.
      (c)   the average force on each electron in the coil due to the
            magnetic field. The free electron density in the material of the coil
            is 1028 m-3
25.   (a)   Draw the graphs showing the variation of the following with the
            frequency of ac source in a circuit :
            (i)      Resistance
            (ii)     Capacitive reactance
            (iii)    Inductive reactance
      (b)   Can the voltage drop across the inductor or the capacitor in a
            series LCR circuit be greater than the applied voltage of the ac
            source ? Justify your answer.
26.   (a)   State any two properties of a nucleus.
      (b)   Why is the density of a nucleus much more than that of an atom ?
      (c)   Show that the density of the nuclear matter is the same for all
            nuclei.
27.   State the three postulates of Bohr's theory of hydrogen atom.
      A hydrogen atom de-excites from level n tolevel (n - 1). Show that,
       according to Bohr's theory, the frequency of radiation emittedve,for
                                                                      n
      large values of n, where a is a constant. This result exactly agrees with
      that obtained from classical physics - one of the successes of Bohr's
      theory.
28.   (a)   The wavelength of the electromagnetic wave is often correlated
            with the characteristic size of the system that radiates." Give two
            examples to justify this statement.
      (b)   (i)     Long distance radio broadcasts use short-wave bands. Why?
            (ii)   Optical and radio telescopes are built on the ground, but
                   X"ray astronomy is possible only from satellites orbiting the
                   Earth. Why ?                                                    3
                                    SECTION D
Questions number 29 and 30 are case study-based questions. Read the followi:%
paragraphs and answer the questions that follow.
29.   A lens is a transparent medium bounded by two surfaces, with one or
      both surfaces being spherical. The focal length of a lens determined by
      the radi of curvature of its two surfaces and the refractive index of its
      medium with respect to that of the surrounding medium. The power of a
      lens is reciprocal of its focal length. If a number of lenses are kept in
      contact, the power of the combination is the algebraic sum of the powers
      of the individual lenses.
(i)     A double-convex lens, with each face having same radius of
        curvature R, is made of glass of refractive index n. Its power is :     1
               2 (n -1)                         (2n1)
        (A)                               (B)
                    R                              R
               (n -1)                           (2n -1)
        (C)                               (D)
                   2R                             2R
(iü)    A double-convex lens of power P, with each face having same
        radius of curvature, is cut into two equal parts perpendicular to its
        principal axis. The power of one part of the lens will be:              1
        (A)   2P                (B)   P   (C) 4P               (D) P2
(iüi)   The above two parts are kept in contact with each other as shown
        in the figure. The power of the combination will be :                   1
               P                                                     P
        (A)                     (B)   P   (C) 2P               (D)
               2
(iv)    (a)   A double-convex lens of power P, with each face having same
              radius of curvature, is cut along its principal axis. The two
              parts are arranged as shown in the figure. The power of the
              combination will be:                                              1
              (A)       Zero                    (B)     P
                                                        P
              (C)       2P                      (D)
                                                        2
                          OR
        (b)   Two convex lenses of focal lengths 60 cm and 20 cm are held
              coaxially in contact with each other. The power of the
              combination is :                                                  1
              (A)       6-6 D                   (B)     15 D
              (C)                               (D)
                                                        80
30.   Junction Diode as a Rectifier:
      The process of conversion of an ac voltage into a de voltage is called
      rectification and the device which performs this conversion is called a
      rectifier. The characteristics of a p-n junction diode reveal that when a
      p-n junction diode is forward biased, it offers a low resistance and when it
      is reverse biased, it offers a high resistance. Hence, a p-n junction diode
      conducts only when it is forward biased. This property of a p-n junction
      diode makes it suitable for its use as a rectifier.
      Thus, when an ac voltage is applied across a p-n junction, it conducts
      only during those alternate half cycles for which it is forward biased. A
      rectifier which rectifies only half cycle of an ac voltage is called a
      half-wave rectifier and one that rectifies both the half cycles is known as
      a full-wave rectifier.
      (i)     The root mean square value of an alternating voltage applied to a
              full-wave rectifier is       . Then the root mean square value of the
              rectified output voltage is :                                             1
              (A)                                (B)
                     V2                                V2
              (C)    2Vo                         (D)
                     J2                                2V2
      (ii)    In a full-wave rectifier, the current in each of the diodes flows for :   1
              (A)    Complete cycle of the input signal
              (B)    Half cycle of the input signal
              (C)    Less than half cycle of the input signal
              (D)    Only for the positive half cycle of the input signal
      (iii)   In a full-wave rectifier :                                                1
              (A)    Both diodes are forward biased at the same time.
              (B)    Both diodes are reverse biased at the same time.
              (C)    One is forward biased and the other is reverse biased at the
                     same time.
              (D)    Both are forward biased in the first half of the cycle and
                               biased in the     nd half
     16:51 X                                                                D21%
            Reels
     (iv)   (a)   An alternating voltage of frequency of 50 Hz is applied to a
                  half-wave rectifier. Then the ripple frequency of the output
                  will be :                                                         1
                  (A)   100 Hz                    (B)    50 Hz
                  (C)   25 Hz                      (D)   150 Hz
                           OR
            (b)   A signal, as shown in the figure, is applied to a p-n junction
                  diode. Identify the output across resistance R,:                  1
                  (A)
                  (B
                  (C)   -5 V
                  (D)
                                                                                   22.5K
        shubhampal.sir
             hpax Rolex BGM Mix
Physics Paper Set A
              |||
                                      SECTION E
31.   (a)   (i)     A resistor and a capacitor are connected in series to an ac
                    source v = V, sin t. Derive an expression for the impedance
                    of the circuit.
            (ii)    When does an inductor act as a conductor in a circuit ? Give
                    reason for it.
            (iii)   An electric lamp is designed to operate at 110 V de and
                     11A current. If the lamp is operated on 220 V, 50 Hz
                    ac source with a coil in series, then find the inductance of
                    the coil.                                                       5
                                OR
      (b)   (i)     Draw a labelled diagram of a step-up transformer and
                    describe its working principle. Explain any three causes for
                    energy losses in a real transformer.
            (ii)    A step-up transformer converts a low voltage into high
                    voltage. Does it violate the principle of conservation of
                    energy ? Explain.
            (iii)   A step-up transformer has 200 and 3000 turns in its
                    primary and secondary coils respectively. The input voltage
                    given to the primary coil is 90 V. Calculate:
                    (1)    The output voltage across the secondary coil
                    (2)     The current in the primary coil if the current in the
                                            9.0 A
  32.         a      (6)
                             Derive an expression for potential energy of an
                                                                             electric
                             dipole       in an
                                           external uniform electric field E. When is
                            the potential energy of the dipole (1)
                             (2)minimum ?                              maximum, and
                    (iü)    An electric dipole consists of point
                            + 1-0 pC located at (0, 0) and (3
                                                                 charges- 10 pC and
                                                              mm, 4 mm)      respectively
                                                                                  in
                            X-y plane. An electric field E = 1000 V)^
                                                                     i is switched on
                            in the    region. Find the torque t acting on the dipole.          5
                                        OR
          (b)      (i)      An electric dipole (dipole moment p pi),
                                                                          consisting of
                            charges -qand q. separated by distance 2a, is placed along
                            the x-axis, with its centre at the origin. Show that
                                                                                         the
                            potential V, due to this dipole, at a point x, (x >> a) is equal
                                 1
                            to           P.i
                   (ii)    Two isolated metallic spheres S, and S, of radii 1 cm and
                           3 cm respectively are charged such that both have the same
                                        2
                           charge densityx10"C/m. They are placed far away
                           from each other and connected by a thin wire. Calculate the
                           new charge on sphere S,.
33.     (a)       (i)      A ray of light passes through a triangular prism. Show
                           graphically, how the angle of deviation varies with the angle
                           of incidence ? Hence define the angle of minimum deviation.
                  (ii)     A ray of light is incident normally on a refracting face of a
                           prism of prism angle A and suffers a deviation of angle &.
                           Prove that the refractive index n of the material of the prism
                                               sin (A + ö)
                           is given by n
                                                  sin A
      (iüi)   The refractive index of the material of a prism is J2. If the
              refracting angle of the prism is 60°, find the
              (1)     Angle of minimum deviation, and
              (2)     Angle of incidence.                                     5
                        OR
(b)   (1)     State Huygens' principle. A plane wave is incident at an
              angle ion a reflecting surface. Construct the corresponding
              reflected wavefront. Using this diagram, prove that the
              angle of reflection is equal to the angle of incidence.
      (ii)    What are the coherent sources of light ? Can two
              independent sodium lamps act like coherent sources ?
              Explain.
      (ii)    A beam of light consisting of a known wavelength 520 nm
              and an unknown wavelength , used in Young's double slit
              experiment produces two interference patterns such that the
              fourth bright fringe of unknown wavelength coincides with
              the fifth bright fringe of known wavelength. Find the value
              of A.