Material Safety Data Sheet
QP. BOND
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1.1 Product identifier
Commercial product name: Q.P BOND
1.2 Relevant identified uses of the substance.
Acrylic bonding agent serves as adhesive assistant, it is used on concrete and wood surfaces as a
primer and as additive for mortar, tile adhesive, tile grout and cement admixtures. It is applicable
on interior and exterior concrete.
1.3 Details of the supplier of the safety data sheet
Manufacturer/distributor: Quds Paints
State/postal code/city: Industrial Zone, Sahab _Jordan 11512
Telephone: +962 (6) 4029023
Fax: +962 (6) 4020504
P.O.Box: 176
Information about the Safety Data Sheet: Telephone +962 (6) 4029023
Fax: +962 (6) 4020504
eMail: Tech@qudspaints.com
1
2. HAZARDS IDENTIFICATION
2.1 Classification of the substance
Not regarded as a health or environmental hazard under current legislation.
3 .COMPOSITION/INFORMATION ON INGREDIENTS
3.1 Substances
Not applicable
3.2 Mixtures
3.2.1 Chemical characterization (preparation)
Copolymer of: styrene acrylic copolymer
4. FIRST-AID MEASURES
4.1 Description of first aid measures
General information:
Under ordinary workplace conditions: No special measures required.
After inhalation:
Move the exposed person to fresh air at once. Get medical attention if any discomfort
Continues.
After contact with the skin:
Wash with plenty of water or water and soap. Get medical attention if irritation
persists after washing
2
After contact with the eyes:
Rinse immediately with plenty of water. Seek medical advice in case of continuous
irritation.
After swallowing:
If conscious, give several small portions of water to drink. Do not induce vomiting. In
cases of sickness seek medical advice.
4.2 Indication of any immediate medical attention and special treatment needed
Due to its physical properties, may cause mechanical irritation. Product may agglutinate in
the gastro-intestinal tract. Medical assistance should be sought. Depending on the
symptoms, invasive measures may be necessary.
5. FIRE-FIGHTING MEASURES
5.1 Extinguishing media
This material is not flammable. Use extinguishing media appropriate for surrounding fire.
Suitable extinguishing media:
Water spray, water mist, extinguishing powder, foam, carbon dioxide .
Extinguishing media which must not be used for safety reasons:
Water jet.
5.2 Special hazards arising from the substance or mixture
Hazardous combustion products: hydrogen chloride.
5.3 Advice for firefighters
Special protective equipment for firefighting:
Use respiratory protection independent of re circulated air.
3
6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Do not breathe dust.
6.2 Environmental precautions
Cover any spilled material in accordance with regulations to prevent dispersal by wind.
6.3 Methods and material for containment and cleaning up
Take up mechanically and disposed of according to local/state/federal regulations.
Further information:
Eliminate all sources of ignition.
7. HANDLING AND STORAGE
7.1 Precautions for safe handling
Prevent air-borne concentrations higher than the occupational exposure limits. Keep the
container tightly closed.
Exclude sources of heat, sparks and open flame. Avoid skin and eye contact. Avoid
inhalation of vapor. Smoking, eating and drinking should be prohibited in storage and use
areas. Always keep in containers made of the same material as the supply container, or in
containers that are compatible with the product.
7.2 Conditions for safe storage, including any incompatibilities
Observe the label precautions. Store in a cool, dry, well ventilated place away from
sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorized access.
Containers which are opened should be properly resealed and kept upright to prevent
Leakage.
4
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters
8.2 Exposure controls
Provide adequate ventilation. Where reasonably practicable this should be achieved by
the use of local exhaust ventilation and good general extraction. If these are not sufficient
to maintain concentrations of particulates and/or solvent vapors below the relevant
Exposure Limit Values, suitable respiratory protection must be worn.
Respiratory protection
Avoid the inhalation of vapor, particulates and spray mist. Where reasonably practicable,
this should be achieved by the use of local exhaust ventilation and good general
ventilation. If this is not sufficient to maintain concentrations of particulates and solvent
vapor below the occupational exposure limit, respiratory protection must be worn.
Hand protection
Wear suitable gloves for protection against materials.
Eye protection
Eye protection designed to protect against liquid splashes should be worn
8.2.2 Exposure to the environment limited and controlled
Prevent material from entering surface waters and soil.
9 .PHYSICAL AND CHEMICAL PROPERTIES
General information:
Physical state / form................................................: emulsion.
Color .....................................................................: white
Odor ......................................................................: odorless
Specific Density.............................................................: 1.04
Water solubility / miscibility......................................: soluble.
pH-Value .................................................................: 7-9
5
10. STABILITY AND REACTIVITY
Reactivity; Chemical stability; Possibility of hazardous reactions
If stored and handled in accordance with standard industrial practices no hazardous reactions
are known.
11 TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effects
11.1.1 Acute toxicity
Assessment:
Based on the available data acute toxic effects are not expected after single oral exposure.
11.1.2 Skin corrosion/irritation
Assessment:
Based on the available data a clinically relevant skin irritation hazard is not expected.
11.1.3 Serious eye damage / eye irritation
Assessment:
Based on the available data a clinically relevant eye irritation hazard is not expected.
11.1.4 Respiratory or skin sensitization
Assessment:
Based on the available data a sensitization reaction is not expected from this product.
11.1.5 Germ cell mutagenicity
Assessment:
Based on known data a significant mutagenic potential may be excluded.
6
11.1.6 Carcinogenicity
Assessment:
For this endpoint no toxicological test data is available for the whole product.
11.1.7 Reproductive toxicity
Assessment:
For this endpoint no toxicological test data is available for the whole product.
11.1.8 Specific target organ toxicity (single exposure)
Assessment:
For this endpoint no toxicological test data is available for the whole product.
11.1.9 Specific target organ toxicity (repeated exposure)
Assessment:
For this endpoint no toxicological test data is available for the whole product.
11.1.10 Aspiration hazard
Assessment:
Based on the physical-chemical properties of the product no aspiration hazard must be
expected.
11.1.11 Further toxicological information
Remark for the listed toxicological data: Evaluation in analogy to similar product.
7
12 ECOLOGICAL INFORMATION
12.1 Toxicity
Assessment:
No expected damaging effects to aquatic organisms. According to current knowledge adverse
effects on water purification plants are not expected.
12.2 Persistence and degradability
Assessment:
Polymer component: Elimination by adsorption to activated sludge. Separation by flocculation
is possible.
Polymer components: Not readily biodegradable.
12.3 Bioaccumulative potential
Assessment:
No adverse effects expected.
12.4 Mobility in soil
Assessment:
No adverse effects expected.
12.5 Other adverse effects
None known.
12.6 Additional information
The ecotoxicological results provided were obtained from tests with similar products.
8
SECTION 13: Disposal considerations
13.1 Waste treatment methods
13.1.1 Material
Recommendation:
Dispose of according to regulations by incineration in a special waste incinerator. Small
quantities may be disposed of by incineration in an approved facility. Observe
local/state/federal regulations.
13.1.2 Un cleaned packaging
Recommendation:
Completely discharge containers. Containers may be recycled or re-used.
Observe local/state/federal regulations.
Recommended cleaning agent:
Water.
SECTION 14: Transport information
Road:
Valuation ................................................: Not regulated for transport
Railway:
Valuation ................................................: Not regulated for transport
Transport by sea:
Valuation ................................................: Not regulated for transport
Air transport:
Valuation ................................................: Not regulated for transport
14.5 Environmental hazards
Hazardous to the environment: no.
9
SECTION 15: Regulatory information
15. Safety, health and environmental regulations/legislation specific for the substance or
mixture
National and local regulations must be observed.
SECTION 16: Other information
16.1 Material
The details in this document are based on the state of our knowledge at the time of revision.
They do not constitute an assurance of the described product properties in terms of statutory
warranty requirements.
The providing of this document to a recipient does not relieve the recipient of his or her
responsibility toward compliance with all laws and stipulations applicable to the product. This
applies in particular to the further sale or distribution of the product or substances or items
containing the product, in other jurisdictions and with regard to the protection of third-party
intellectual property rights. If the described product is processed or mixed with other
substances or materials, the details stated in this document cannot be conferred to the
resultant new product unless this has been expressly mentioned. If the product is repackaged,
the recipient is obligated to additionally provide the required safety-related information.
10
