Addressable Dual Monitor

Module
IDP-Monitor-2
The IDP-Monitor-2 is an addressable monitor module with two
initiating circuits for use with Honeywell Farenhyt Series fire alarm
control panels (FACPs). The IDP-Monitor-2 acts as an interface to
contact devices, such as waterflow switches and pull stations.
IDP-MONITOR-2
The IDP-Monitor-2 supports Class B supervised wiring
to the load device. Conventional 4-wire smoke detectors Compatibility
can be monitored for alarm and trouble conditions.
The IDP-Monitor-2 is compatible with
Because the IDP-Monitor-2 is capable of monitoring two separate Class B the following Farenhyt Series FACPs:
circuits, it is ideal for waterflow tamper switch and flow switch monitoring. • IFP-2100 / IFP-2100ECS / RFP-2100
• IFP-2000 / IFP-2000ECS / RPS-2000
Installation • IFP-1000 / IFP-1000ECS
The IDP-Monitor-2 mounts directly into a 4” square electrical box. The • IFP-300 / IFP-300ECS
box must have a minimum depth of 2-1/8”. A surface mount electrical • IFP-100 / IFP-100ECS
box (System Sensor® PN SMB500) is available from Honeywell. • IFP-75
• IFP-50

F E AT U R E S & B E N E F I T S
• Monitor two circuits, • Attractive ivory cover
with unique plate
addresses,
• Rotary address
simultaneously
switches for fast
• Support for Class B installation
wiring
• SEMS screws for easy
• Fully supervised wiring
• Panel controlled • UL Listed
status LED that
• CSFM Listed
fl ashes green in
normal state and is • MEA Listed 457-99-E
solid red in alarm Vol. V
IDP-Monitor-2 Technical Specifications
For a complete listing of all
compliance approvals and
certifications, please visit
www.farenhyt.com.

Microsoft, Windows, and

the Windows Logo are
registered trademarks
or trademarks of
Microsoft Corporation.

Honeywell® and
System Sensor® are
registered trademarks
of and Farenhyt™ is a
trademark of Honeywell
International, Inc.

This document is not

intended to be used for
installation purposes. We
try to keep our product
information up-to
date and accurate. We
cannot cover all specific
applications or anticipate
Typical Wiring for IDP-Monior-2 Module, NFPA Style B all requirements. All
specifications are subject
to change without notice.

For Technical
Support, Please call
SPECIFICATIONS* ORDERING INFORMATION 800-446-6444.
Physical: 4.5" H x 4" W x 1.3 D ( 11.4 x 10.2 x 3.2cm) IDP-Monitor-2: Dual Monitoring Module
Shipping Weight: 6.3oz (196g)
ACCESSORIES
ELECTRICAL RATINGS SMB500: 4” Square Surface Mount Electrical Box
Operating Voltage: 15 – 32VDC
Maximum Current Draw: 6.4mA (LED on)
SLC Standby & Alarm Current: 750μA max @ 24
VDC (one communication every sec with 47k EOL)
End of Line Resistance: 47kW

ENVIRONMENTAL
Operating Temperature: 32º-120ºF (0ºC – 49ºC)
Humidity: 10 to 93% non-condensing)

For more information

Learn more about Honeywell’s Farenhyt Series
and other products available by visiting
www.farenhyt.com

Honeywell Security & Fire

12 Clintonville Road
Northford, CT 06472 Doc 350289 | Rev G| 09/17
800-328-0103 © 2017 Honeywell International Inc.